Electrocatalytic activity of symmetric and asymmetric Co(II) and Mn(III) porphyrins in the presence of graphene quantum dots towards the oxidation of hydrazine
- Authors: Jokazi, Mbulelo
- Date: 2022-10-14
- Subjects: Electrocatalysis , Hydrazine , Quantum dots , Graphene , Porphyrins
- Language: English
- Type: Academic theses , Master's theses , text
- Identifier: http://hdl.handle.net/10962/362894 , vital:65372
- Description: The influence of metal porphyrins in electro-oxidation of hydrazine is explored. A series of symmetric and asymmetric porphyrins alone and in the presence of graphene quantum dots (GQDs) are employed in this work. Tetra 4-aminophenyl porphyrin, manganese tetra 4-aminophenyl porphyrin, manganese tetra 4-aminophenyl porphyrin--GQDs, and manganese tetra 4-aminophenyl porphyrin@GQDs are the symmetric porphyrins. The asymmetric porphyrin and composites are 5, 10, 15-tris(aminophenyl)-20-(4-carboxyphenyl) porphyrins, manganese 5, 10, 15-tris(aminophenyl)-20-(4-carboxyphenyl) porphyrins, cobalt 5, 10, 15-tris(aminophenyl)-20-(4-carboxyphenyl) porphyrins, manganese 5, 10, 15-tris(aminophenyl)-20-(4-carboxyphenyl) porphyrins--GQDs, and cobalt 5, 10, 15-tris(aminophenyl)-20-(4-carboxyphenyl) porphyrins--GQDs. These complexes were synthesized and characterized accordingly and applied for electrocatalysis. The electrocatalytic experiments were carried out using glassy carbon electrode and the modification was through drop-dry method. The porphyrin and GQDs synthesized were characterized using UV-Vis spectroscopy, Mass spectrometry, X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy and energy dispersive x-ray spectroscopy. The modified electrodes were characterized using cyclic voltammetry and electrochemical Impedance spectroscopy. The introduction of metal ion in the center of the porphyrin improved electrocatalysis. The presence of push-pull substituents in the porphyrin lowered the oxidation potential and improved the catalysis. The presence of GQDs improved catalysis in both symmetric and asymmetric porphyrin compared to individual components. Cobalt porphyrins showed better activity than manganese porphyrin. , Thesis (MSc) -- Faculty of Science, Chemistry, 2022
- Full Text:
- Date Issued: 2022-10-14
- Authors: Jokazi, Mbulelo
- Date: 2022-10-14
- Subjects: Electrocatalysis , Hydrazine , Quantum dots , Graphene , Porphyrins
- Language: English
- Type: Academic theses , Master's theses , text
- Identifier: http://hdl.handle.net/10962/362894 , vital:65372
- Description: The influence of metal porphyrins in electro-oxidation of hydrazine is explored. A series of symmetric and asymmetric porphyrins alone and in the presence of graphene quantum dots (GQDs) are employed in this work. Tetra 4-aminophenyl porphyrin, manganese tetra 4-aminophenyl porphyrin, manganese tetra 4-aminophenyl porphyrin--GQDs, and manganese tetra 4-aminophenyl porphyrin@GQDs are the symmetric porphyrins. The asymmetric porphyrin and composites are 5, 10, 15-tris(aminophenyl)-20-(4-carboxyphenyl) porphyrins, manganese 5, 10, 15-tris(aminophenyl)-20-(4-carboxyphenyl) porphyrins, cobalt 5, 10, 15-tris(aminophenyl)-20-(4-carboxyphenyl) porphyrins, manganese 5, 10, 15-tris(aminophenyl)-20-(4-carboxyphenyl) porphyrins--GQDs, and cobalt 5, 10, 15-tris(aminophenyl)-20-(4-carboxyphenyl) porphyrins--GQDs. These complexes were synthesized and characterized accordingly and applied for electrocatalysis. The electrocatalytic experiments were carried out using glassy carbon electrode and the modification was through drop-dry method. The porphyrin and GQDs synthesized were characterized using UV-Vis spectroscopy, Mass spectrometry, X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy and energy dispersive x-ray spectroscopy. The modified electrodes were characterized using cyclic voltammetry and electrochemical Impedance spectroscopy. The introduction of metal ion in the center of the porphyrin improved electrocatalysis. The presence of push-pull substituents in the porphyrin lowered the oxidation potential and improved the catalysis. The presence of GQDs improved catalysis in both symmetric and asymmetric porphyrin compared to individual components. Cobalt porphyrins showed better activity than manganese porphyrin. , Thesis (MSc) -- Faculty of Science, Chemistry, 2022
- Full Text:
- Date Issued: 2022-10-14
Electrode surface modification using metallophthalocyanines and metal nanoparticles : electrocatalytic activity
- Authors: Maringa, Audacity
- Date: 2015
- Subjects: Phthalocyanines , Nanoparticles , Electrocatalysis , Scanning electron microscopy , X-ray photoelectron spectroscopy , Electrochemistry , Scanning electrochemical microscopy
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4541 , http://hdl.handle.net/10962/d1017921
- Description: Metallophthalocyanines and metal nanoparticles were successfully synthesized and applied for the electrooxidation of amitrole, nitrite and hydrazine individually or when employed together. The synthesized materials were characterized using the following techniques: predominantly scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), electrochemistry and scanning electrochemical microscopy (SECM). Different electrode modification methods were used to modify the glassy carbon substrates. The methods include adsorption, electrodeposition, electropolymerization and click chemistry. Modifying the glassy carbon substrate with MPc (electropolymerization) followed by metal nanoparticles (electrodeposition) or vice versa, made a hybrid modified surface that had efficient electron transfer. This was confirmed by electrochemical impedance studies with voltammetry measurements having lower detection potentials for the analytes. This work also describes for the first time the micropatterning of the glassy carbon substrate using the SECM tip. The substrate was electrografted with 4-azidobenzenediazonium salt and then the click reaction was performed using ethynylferrocene facilitated by Cu⁺ produced at the SECM tip. The SECM imaging was then used to show the clicked spot.
- Full Text:
- Date Issued: 2015
- Authors: Maringa, Audacity
- Date: 2015
- Subjects: Phthalocyanines , Nanoparticles , Electrocatalysis , Scanning electron microscopy , X-ray photoelectron spectroscopy , Electrochemistry , Scanning electrochemical microscopy
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4541 , http://hdl.handle.net/10962/d1017921
- Description: Metallophthalocyanines and metal nanoparticles were successfully synthesized and applied for the electrooxidation of amitrole, nitrite and hydrazine individually or when employed together. The synthesized materials were characterized using the following techniques: predominantly scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), electrochemistry and scanning electrochemical microscopy (SECM). Different electrode modification methods were used to modify the glassy carbon substrates. The methods include adsorption, electrodeposition, electropolymerization and click chemistry. Modifying the glassy carbon substrate with MPc (electropolymerization) followed by metal nanoparticles (electrodeposition) or vice versa, made a hybrid modified surface that had efficient electron transfer. This was confirmed by electrochemical impedance studies with voltammetry measurements having lower detection potentials for the analytes. This work also describes for the first time the micropatterning of the glassy carbon substrate using the SECM tip. The substrate was electrografted with 4-azidobenzenediazonium salt and then the click reaction was performed using ethynylferrocene facilitated by Cu⁺ produced at the SECM tip. The SECM imaging was then used to show the clicked spot.
- Full Text:
- Date Issued: 2015
Nanocomposites of carbon nanomaterials and metallophthalocyanines : applications towards electrocatalysis
- Authors: Nyoni, Stephen
- Date: 2016
- Subjects: Nanocomposites (Materials) , Nanostructured materials , Electrocatalysis
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4561 , http://hdl.handle.net/10962/d1020846
- Description: Nanohybrid materials have been prepared and examined for their electrocatalytic activity. The nanocomposites have been prepared from carbon nanomaterials (multiwalled carbon nanotubes (MWCNTs) and graphene nanosheets), cadmium selenide quantum dots and metallophthalocyanines (MPcs). The MPcs used in this work are cobalt tetraamino-phthalocyanine (CoTAPc) and tetra (4-(4,6-diaminopyrimidin-2-ylthio) phthalocyaninatocobalt (II)) (CoPyPc). Their activity has also been explored in different forms; polymeric MPcs, iodine doped MPcs and covalently linked MPcs. The premixed drop-dry, sequential drop-dry and electropolymerisation electrode modification techniques were used to prepare nanocomposite catalysts on the glassy carbon electrode (GCE) surface. The sequential drop dry technique for MPc and MWCNTs gave better catalytic responses in terms of limit of detection, catalytic and electron transfer rate constants relative to the premixed. MWCNTs and CdSe-QDs have been used as intercalating agents to reduce restacking of graphene nanosheets during nanocomposite preparation. Voltammetry, chronoamperometry, scanning electrochemical microscopy and electrochemical impedance spectroscopy methods are used for electrochemical characterization modified GCE. X-ray photoelectron spectroscopy, X-ray diffractometry, transmission electron microscopy, scanning electron microscopy, infra-red spectroscopy, Raman spectroscopy were used to explore surface functionalities, morphology and topography of the nanocomposites. Electrocatalytic activity and possible applications of the modified electrodes were tested using oxygen reduction reaction, l-cysteine oxidation and paraquat reduction. Activity of nanocomposites was found superior over individual nanomaterials in these applications.
- Full Text:
- Date Issued: 2016
- Authors: Nyoni, Stephen
- Date: 2016
- Subjects: Nanocomposites (Materials) , Nanostructured materials , Electrocatalysis
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4561 , http://hdl.handle.net/10962/d1020846
- Description: Nanohybrid materials have been prepared and examined for their electrocatalytic activity. The nanocomposites have been prepared from carbon nanomaterials (multiwalled carbon nanotubes (MWCNTs) and graphene nanosheets), cadmium selenide quantum dots and metallophthalocyanines (MPcs). The MPcs used in this work are cobalt tetraamino-phthalocyanine (CoTAPc) and tetra (4-(4,6-diaminopyrimidin-2-ylthio) phthalocyaninatocobalt (II)) (CoPyPc). Their activity has also been explored in different forms; polymeric MPcs, iodine doped MPcs and covalently linked MPcs. The premixed drop-dry, sequential drop-dry and electropolymerisation electrode modification techniques were used to prepare nanocomposite catalysts on the glassy carbon electrode (GCE) surface. The sequential drop dry technique for MPc and MWCNTs gave better catalytic responses in terms of limit of detection, catalytic and electron transfer rate constants relative to the premixed. MWCNTs and CdSe-QDs have been used as intercalating agents to reduce restacking of graphene nanosheets during nanocomposite preparation. Voltammetry, chronoamperometry, scanning electrochemical microscopy and electrochemical impedance spectroscopy methods are used for electrochemical characterization modified GCE. X-ray photoelectron spectroscopy, X-ray diffractometry, transmission electron microscopy, scanning electron microscopy, infra-red spectroscopy, Raman spectroscopy were used to explore surface functionalities, morphology and topography of the nanocomposites. Electrocatalytic activity and possible applications of the modified electrodes were tested using oxygen reduction reaction, l-cysteine oxidation and paraquat reduction. Activity of nanocomposites was found superior over individual nanomaterials in these applications.
- Full Text:
- Date Issued: 2016
Substituent effects on the electrocatalytic activity of cobalt phthalocyanine in the presence of graphene quantum dots
- Centane, Sixolile Sibongiseni
- Authors: Centane, Sixolile Sibongiseni
- Date: 2019
- Subjects: Phthalocyanines , Quantum dots , Electrocatalysis , Electrochemistry
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/67614 , vital:29121
- Description: The electrocatalytic activity of metallophthalocyanines derivatives is explored. Cobalt monocarboxyphenoxy phthalocyanine (1), cobalt tetracarboxyphenoxy phthalocyanine (2), cobalt tetraaminophenoxy phthalocyanine (3) and cobalt tris-(tert-butylphenoxy) monocarboxyphenoxy phthalocyanine (4) are the phthalocyanines employed in this work. The metallophthalocyanines were employed alone as well as in the presence of the carbon based graphene quantum dots. The electrocatalytic behaviour of functionalized GQDs is also explored herein. The catalytic processes studies were conducted on a glassy carbon electrode surface. Modification of the electrode was achieved by the adsorption method. The materials were adsorbed either alone, as premixed/covalently linked GQDs/Pc conjugates or sequentially. Sequentially adsorbed electrodes involved the phthalocyanines on top or beneath GQDs. Sequentially modified electrodes where the phthalocyanine had higher currents and low detection limits than when the phthalocyanine is underneath. Premixed conjugates showed better activity than the covalently formed conjugates. The nanomaterials synthesized and used in this work were characterized using transmission electron microscopy, UV-Vis spectroscopy, dynamic light scattering, Raman spectroscopy, X-ray diffraction, Atomic Force Microscopy and X-ray photoelectron spectroscopy. The modified electrodes were characterized using cyclic voltammetry and scanning electrochemical spectroscopy. The electrocatalytic activity of the modified electrodes towards the oxidation of hydrazine was evaluated using cyclic voltammetry and chronoamperometry. Superior catalytic activity was observed for the conjugates compared to that of the individual conjugates.
- Full Text:
- Date Issued: 2019
- Authors: Centane, Sixolile Sibongiseni
- Date: 2019
- Subjects: Phthalocyanines , Quantum dots , Electrocatalysis , Electrochemistry
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/67614 , vital:29121
- Description: The electrocatalytic activity of metallophthalocyanines derivatives is explored. Cobalt monocarboxyphenoxy phthalocyanine (1), cobalt tetracarboxyphenoxy phthalocyanine (2), cobalt tetraaminophenoxy phthalocyanine (3) and cobalt tris-(tert-butylphenoxy) monocarboxyphenoxy phthalocyanine (4) are the phthalocyanines employed in this work. The metallophthalocyanines were employed alone as well as in the presence of the carbon based graphene quantum dots. The electrocatalytic behaviour of functionalized GQDs is also explored herein. The catalytic processes studies were conducted on a glassy carbon electrode surface. Modification of the electrode was achieved by the adsorption method. The materials were adsorbed either alone, as premixed/covalently linked GQDs/Pc conjugates or sequentially. Sequentially adsorbed electrodes involved the phthalocyanines on top or beneath GQDs. Sequentially modified electrodes where the phthalocyanine had higher currents and low detection limits than when the phthalocyanine is underneath. Premixed conjugates showed better activity than the covalently formed conjugates. The nanomaterials synthesized and used in this work were characterized using transmission electron microscopy, UV-Vis spectroscopy, dynamic light scattering, Raman spectroscopy, X-ray diffraction, Atomic Force Microscopy and X-ray photoelectron spectroscopy. The modified electrodes were characterized using cyclic voltammetry and scanning electrochemical spectroscopy. The electrocatalytic activity of the modified electrodes towards the oxidation of hydrazine was evaluated using cyclic voltammetry and chronoamperometry. Superior catalytic activity was observed for the conjugates compared to that of the individual conjugates.
- Full Text:
- Date Issued: 2019
Synthesis, characterisation and electrocatalytic behaviour of three series of Metal Organic Frameworks
- Authors: Murinzi, Tafadzwa Wendy
- Date: 2020
- Subjects: Electrochemistry , Metal-organic frameworks , Polyoxometalates , Fourier transform infrared spectroscopy , Electrocatalysis , Cysteine
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/167598 , vital:41495
- Description: Metal organic frameworks (MOFs) have received a lot of attention over the past few years due to their vast range of interesting properties and applications, such as catalysis, environmental sensing and storage. This wide range of potential applications is afforded by careful selection and manipulation of the components chosen in assembling of MOFs. In this study, three series of MOFs were synthesized from Co(II), Cu(II) and Mo(VI) polyoxometallates with either 1,3,5-benzenetricarboxylic acid, 1,2,4,5-benzenetetracarboxylic acid or 2,6- pyridinedicarboxylic acid as the ligands. In series 1, the common 1,3,5- benzenetricarboxylic acid MOF, HKUST-1, and POM modified HKUST-1 compounds involving encapsulation and encorporation of the POM were utilised. In series 2, flexible cobalt(II) benzenepolycarboxylate MOFs which investigated the effect of varying the degree of carboxylate substituent were utilised. In series 3, flexibly reduced heterocyclic polycarboxylate MOFs using 2,6-pyridine dicarboxylate were utilised. Solvothermal and slow evaporation synthesis conditions were employed. Where single crystals of good quality were produced, single crystal X-ray diffraction (SC-XRD) was employed for structural elucidation. In the absence of such crystals, a combination of elemental analysis, inductively coupled plasma optical emission spectrometry (ICP-OES) and powder X-ray diffraction (PXRD) was used. Characterization of the MOFs was done by Fourier transform infrared spectrometry (FTIR) and thermal methods, namely thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The electrocatalytic potential of the compounds in the oxidation of L-cysteine was then investigated using a variety of techniques. Cyclic voltammetry was used for L-cysteine detection whilst chronoamperometry and differential pulse voltammetry were used to determine the nanoprobes’ sensitivity, rate constants and detection limits. Electrochemical impedence spectroscopy was used to investigate the charge transfer resistance (RCT) and electron transfer kinetics. Of the three, series 3 gave the best signals and sensitivities for electrocatalysis of L-cysteine followed by series 2 and lastly series 1. Series 2 showed the highest stability and series 1 required the least overpotential. The results highlight the effects of different metal centres and ligands on electrocatalysis. The application of MOFs in electrochemistry is a relatively new field making the findings of this study a significant addition to the body of knowledge.
- Full Text:
- Date Issued: 2020
- Authors: Murinzi, Tafadzwa Wendy
- Date: 2020
- Subjects: Electrochemistry , Metal-organic frameworks , Polyoxometalates , Fourier transform infrared spectroscopy , Electrocatalysis , Cysteine
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/167598 , vital:41495
- Description: Metal organic frameworks (MOFs) have received a lot of attention over the past few years due to their vast range of interesting properties and applications, such as catalysis, environmental sensing and storage. This wide range of potential applications is afforded by careful selection and manipulation of the components chosen in assembling of MOFs. In this study, three series of MOFs were synthesized from Co(II), Cu(II) and Mo(VI) polyoxometallates with either 1,3,5-benzenetricarboxylic acid, 1,2,4,5-benzenetetracarboxylic acid or 2,6- pyridinedicarboxylic acid as the ligands. In series 1, the common 1,3,5- benzenetricarboxylic acid MOF, HKUST-1, and POM modified HKUST-1 compounds involving encapsulation and encorporation of the POM were utilised. In series 2, flexible cobalt(II) benzenepolycarboxylate MOFs which investigated the effect of varying the degree of carboxylate substituent were utilised. In series 3, flexibly reduced heterocyclic polycarboxylate MOFs using 2,6-pyridine dicarboxylate were utilised. Solvothermal and slow evaporation synthesis conditions were employed. Where single crystals of good quality were produced, single crystal X-ray diffraction (SC-XRD) was employed for structural elucidation. In the absence of such crystals, a combination of elemental analysis, inductively coupled plasma optical emission spectrometry (ICP-OES) and powder X-ray diffraction (PXRD) was used. Characterization of the MOFs was done by Fourier transform infrared spectrometry (FTIR) and thermal methods, namely thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The electrocatalytic potential of the compounds in the oxidation of L-cysteine was then investigated using a variety of techniques. Cyclic voltammetry was used for L-cysteine detection whilst chronoamperometry and differential pulse voltammetry were used to determine the nanoprobes’ sensitivity, rate constants and detection limits. Electrochemical impedence spectroscopy was used to investigate the charge transfer resistance (RCT) and electron transfer kinetics. Of the three, series 3 gave the best signals and sensitivities for electrocatalysis of L-cysteine followed by series 2 and lastly series 1. Series 2 showed the highest stability and series 1 required the least overpotential. The results highlight the effects of different metal centres and ligands on electrocatalysis. The application of MOFs in electrochemistry is a relatively new field making the findings of this study a significant addition to the body of knowledge.
- Full Text:
- Date Issued: 2020
Tetra 4-(propargyloxy)phenoxy phthalocyanines: synthesis, spectroscopic, nonlinear optical and electrocatalytic properties
- Authors: Mwanza, Daniel
- Date: 2017
- Subjects: Phthalocyanines , Nonlinear optics , Electrocatalysis , Spectrum analysis , Thermogravimetry , Phthalocyanines Spectra
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/65144 , vital:28695
- Description: This study presents the synthesis, spectroscopic, photophysical and theoretical characterisation of metal-free (H2TPrOPhOPc), cobalt (CoTPrOPhOPc) and manganese (MnTPrOPhOPc) tetra 4-(4-propargyloxy) phenoxy phthalocyanines. Thermal analysis using thermogravimetric analysis (TGA) confirmed the excellent thermal stability of synthesized tetra 4-(4- propargyloxy) phenoxy phthalocyanines. The metal complexes, CoTPrOPhOPc and MnTPrOPhOPc, exhibited better thermal stability when compared to H2TPrOPhOPc. The residual percentage weight remaining was approximately 70% for CoTPrOPhOPc and MnTPrOPhOPc and 45% for H2TPrOPhOPc after 600°C, clearly confirming the stability of the metal complexes. The MTPrOPhOPcs (where M = H2, Co and Mn) complexes exhibited excellent nonlinear optical properties with strong reverse saturable absorption (RSA), especially when 560 nm excitation laser was used. Their nonlinear optical properties followed this trend: H2TPrOPhOPc > CoTPrOPhOPc > MnTPrOPhOPc. According to the trend observed, the H2TPrOPhOPc was an excellent nonlinear optical limiter when compared to the CoTPrOPhOPc and MnTPrOPhOPc. All the investigated complexes exhibited optical limiting properties comparable to the phthalocyanine complexes reported in the literature. The MTPrOPhOPc complexes were further studied for their electrocatalytic and electroanalytical properties towards the detection of hydrogen peroxide. For the electrocatalytic studies, the synthesized complexes were immobilized onto gold electrode surfaces pre-functionalized with phenylazide (Au-PAz) monolayer. Copper (I) catalyzed alkynyl-azide cycloaddition reaction was used to covalently immobilize the MTPrOPhOPcs onto the gold electrode surfaces to form Au-PAz-MTPrOPhOPc. The MTPrOPhOPcs modified gold surfaces (Au-PAz-MTPrOPhOPc) exhibited good reproducibility and stability in various electrolyte conditions. Electrochemical and surface characterisation of the functionalised gold electrode surfaces confirmed the presence of the MTPrOPhOPcs and their electroanalysis was excellent towards electrocatalytic reduction of H2O2, with the limit of detection (LoD) and limit of quantification (LoQ) in the ^M range. The electrocatalytic reduction peaks for H2O2 were observed at -0.37 V for Au-PAz-MnTPrOPhOPc and -0.31 V for Au-PAz-CoTPrOPhOPc when Ag|AgCl pseudo-reference electrode was used. The Au-PAz-MnTPrOPhOPc and Au- PAz-CoTPrOPhOPc gold electrode surfaces showed good sensitivity and reproducibility towards the electrocatalytic reduction of hydrogen peroxide in pH 7.4 phosphate buffer solution. , Thesis (MSc) -- Faculty of Science, Chemistry, 2017
- Full Text:
- Date Issued: 2017
- Authors: Mwanza, Daniel
- Date: 2017
- Subjects: Phthalocyanines , Nonlinear optics , Electrocatalysis , Spectrum analysis , Thermogravimetry , Phthalocyanines Spectra
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/65144 , vital:28695
- Description: This study presents the synthesis, spectroscopic, photophysical and theoretical characterisation of metal-free (H2TPrOPhOPc), cobalt (CoTPrOPhOPc) and manganese (MnTPrOPhOPc) tetra 4-(4-propargyloxy) phenoxy phthalocyanines. Thermal analysis using thermogravimetric analysis (TGA) confirmed the excellent thermal stability of synthesized tetra 4-(4- propargyloxy) phenoxy phthalocyanines. The metal complexes, CoTPrOPhOPc and MnTPrOPhOPc, exhibited better thermal stability when compared to H2TPrOPhOPc. The residual percentage weight remaining was approximately 70% for CoTPrOPhOPc and MnTPrOPhOPc and 45% for H2TPrOPhOPc after 600°C, clearly confirming the stability of the metal complexes. The MTPrOPhOPcs (where M = H2, Co and Mn) complexes exhibited excellent nonlinear optical properties with strong reverse saturable absorption (RSA), especially when 560 nm excitation laser was used. Their nonlinear optical properties followed this trend: H2TPrOPhOPc > CoTPrOPhOPc > MnTPrOPhOPc. According to the trend observed, the H2TPrOPhOPc was an excellent nonlinear optical limiter when compared to the CoTPrOPhOPc and MnTPrOPhOPc. All the investigated complexes exhibited optical limiting properties comparable to the phthalocyanine complexes reported in the literature. The MTPrOPhOPc complexes were further studied for their electrocatalytic and electroanalytical properties towards the detection of hydrogen peroxide. For the electrocatalytic studies, the synthesized complexes were immobilized onto gold electrode surfaces pre-functionalized with phenylazide (Au-PAz) monolayer. Copper (I) catalyzed alkynyl-azide cycloaddition reaction was used to covalently immobilize the MTPrOPhOPcs onto the gold electrode surfaces to form Au-PAz-MTPrOPhOPc. The MTPrOPhOPcs modified gold surfaces (Au-PAz-MTPrOPhOPc) exhibited good reproducibility and stability in various electrolyte conditions. Electrochemical and surface characterisation of the functionalised gold electrode surfaces confirmed the presence of the MTPrOPhOPcs and their electroanalysis was excellent towards electrocatalytic reduction of H2O2, with the limit of detection (LoD) and limit of quantification (LoQ) in the ^M range. The electrocatalytic reduction peaks for H2O2 were observed at -0.37 V for Au-PAz-MnTPrOPhOPc and -0.31 V for Au-PAz-CoTPrOPhOPc when Ag|AgCl pseudo-reference electrode was used. The Au-PAz-MnTPrOPhOPc and Au- PAz-CoTPrOPhOPc gold electrode surfaces showed good sensitivity and reproducibility towards the electrocatalytic reduction of hydrogen peroxide in pH 7.4 phosphate buffer solution. , Thesis (MSc) -- Faculty of Science, Chemistry, 2017
- Full Text:
- Date Issued: 2017
The electrocatalytic response of metallophthalocyanines when clicked to electrodes and to nanomaterials
- Authors: Mpeta, Lekhetho Simon
- Date: 2021
- Subjects: Phthalocyanines , Nanostructured materials , Electrocatalysis , Nanoparticles , Environmental chemistry , Electrodes , Organic wastes -- Purification
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/172191 , vital:42174 , 10.21504/10962/172191
- Description: Conjugates of nanomaterials and metallophthalocyanines (MPcs) have been prepared and their electrocatalytic activity studied. The prepared nanomaterials are zinc oxide and silver nanoparticles, reduced graphene oxide nanosheets and semiconductor quantum dots. The MPcs used in this work are cobalt (II) (1a), manganese(III) (1b) and iron (II) (1c) 2,9(10),16(17),23(24)- tetrakis 4-((4-ethynylbenzyl) oxy) phthalocyaninato, 2,9(10),16(17),23(24)- tetrakis(5-pentyn-oxy) cobalt (II) phthalocyaninato (2), 9(10),16(17),23(24)- tris-[4-tert-butylphenoxy)-2- (4-ethylbezyl-oxy) cobalt (II) phthalocyaninato (3), 9(10),16(17),23(24)- tris-[4-tertbutylphenoxy)-2-(pent-4yn-yloxy)] cobalt (II) phthalocyaninato (4), cobalt (II) (5a) and manganese (III) (5b) 2,9(10),16(17),23(24)- tetrakis [4-(4-(5-chloro-1H-benzo [d]imidazol-2-yl)phenoxy] phthalocyaninato and 9(10),16(17),23(24)- tris tert butyl phenoxy- 2- [4-(4-(5-chloro-1H-benzo[d]imidazole-2-yl)phenoxy] cobalt (II) phthalocyaninato (6). Some of these MPcs (1a, 3 and 4) were directly clicked on azide grafted electrode, while some (1b, 1c, 2, 5a and 5b) were clicked to azide functionalised nanomaterials and then drop-dried on the electrodes. One phthalocyanine (5b) was drop-dried on the electrode then silver nanoparticles were electrodeposited on it taking advantage of metal-N bond. Scanning electrochemical microscopy, voltammetry, chronoamperometry, electrochemical impedance spectroscopy are among electrochemical methods used to characterise modified electrodes. Transmission electron microscopy, X-ray photoelectron spectroscopy, Xray diffractometry, Raman spectroscopy and infrared spectroscopy were employed to study surface functionalities, morphology and topography of the nanomaterials and complexes. Electrocatalytic activity of the developed materials were studied towards oxidation of 2-mercaptoethanol, hydrazine and hydrogen peroxide while the reduction study was based on oxygen and hydrogen peroxide. In general, the conjugates displayed superior catalytic activity when compared to individual materials. Complex 2 alone and when conjugated to zinc oxide nanoparticles were studied for their nonlinear optical behaviour. And the same materials were explored for their hydrazine detection capability. The aim of this study was to develop sensitive, selective and affordable sensors for selected organic waste pollutants. Conjugates were found to achieve the aim of the study compared to when individual materials were employed.
- Full Text:
- Date Issued: 2021
- Authors: Mpeta, Lekhetho Simon
- Date: 2021
- Subjects: Phthalocyanines , Nanostructured materials , Electrocatalysis , Nanoparticles , Environmental chemistry , Electrodes , Organic wastes -- Purification
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/172191 , vital:42174 , 10.21504/10962/172191
- Description: Conjugates of nanomaterials and metallophthalocyanines (MPcs) have been prepared and their electrocatalytic activity studied. The prepared nanomaterials are zinc oxide and silver nanoparticles, reduced graphene oxide nanosheets and semiconductor quantum dots. The MPcs used in this work are cobalt (II) (1a), manganese(III) (1b) and iron (II) (1c) 2,9(10),16(17),23(24)- tetrakis 4-((4-ethynylbenzyl) oxy) phthalocyaninato, 2,9(10),16(17),23(24)- tetrakis(5-pentyn-oxy) cobalt (II) phthalocyaninato (2), 9(10),16(17),23(24)- tris-[4-tert-butylphenoxy)-2- (4-ethylbezyl-oxy) cobalt (II) phthalocyaninato (3), 9(10),16(17),23(24)- tris-[4-tertbutylphenoxy)-2-(pent-4yn-yloxy)] cobalt (II) phthalocyaninato (4), cobalt (II) (5a) and manganese (III) (5b) 2,9(10),16(17),23(24)- tetrakis [4-(4-(5-chloro-1H-benzo [d]imidazol-2-yl)phenoxy] phthalocyaninato and 9(10),16(17),23(24)- tris tert butyl phenoxy- 2- [4-(4-(5-chloro-1H-benzo[d]imidazole-2-yl)phenoxy] cobalt (II) phthalocyaninato (6). Some of these MPcs (1a, 3 and 4) were directly clicked on azide grafted electrode, while some (1b, 1c, 2, 5a and 5b) were clicked to azide functionalised nanomaterials and then drop-dried on the electrodes. One phthalocyanine (5b) was drop-dried on the electrode then silver nanoparticles were electrodeposited on it taking advantage of metal-N bond. Scanning electrochemical microscopy, voltammetry, chronoamperometry, electrochemical impedance spectroscopy are among electrochemical methods used to characterise modified electrodes. Transmission electron microscopy, X-ray photoelectron spectroscopy, Xray diffractometry, Raman spectroscopy and infrared spectroscopy were employed to study surface functionalities, morphology and topography of the nanomaterials and complexes. Electrocatalytic activity of the developed materials were studied towards oxidation of 2-mercaptoethanol, hydrazine and hydrogen peroxide while the reduction study was based on oxygen and hydrogen peroxide. In general, the conjugates displayed superior catalytic activity when compared to individual materials. Complex 2 alone and when conjugated to zinc oxide nanoparticles were studied for their nonlinear optical behaviour. And the same materials were explored for their hydrazine detection capability. The aim of this study was to develop sensitive, selective and affordable sensors for selected organic waste pollutants. Conjugates were found to achieve the aim of the study compared to when individual materials were employed.
- Full Text:
- Date Issued: 2021
- «
- ‹
- 1
- ›
- »