Characterization and application of phthalocyanine-gold nanoparticle conjugates
- Authors: Tombe, Sekai Lana
- Date: 2013
- Subjects: Phthalocyanines , Gold , Zinc , Nanoparticles , Bioconjugates , Photochemistry , Photocatalysis , Electrospinning , Polymers , Pollutants , Phenols , Azo dyes
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4293 , http://hdl.handle.net/10962/d1004517 , Phthalocyanines , Gold , Zinc , Nanoparticles , Bioconjugates , Photochemistry , Photocatalysis , Electrospinning , Polymers , Pollutants , Phenols , Azo dyes
- Description: This work presents the syntheses, photophysical and photochemical characterization of arylthio zinc phthalocyanines and their gold nanoparticle conjugates. Spectroscopic and microscopic studies confirmed the formation of the phthalocyanine-gold nanoparticle conjugates which exhibited enhanced photophysicochemical properties in comparison to the phthalocyanines. The studies showed that the presence of gold nanoparticles significantly lowered fluorescence quantum yields and lifetimes. However, this interaction did not restrict the formation of excited singlet and triplet states and hence the formation of singlet oxygen required for photocatalysis. The conjugates showed significantly higher singlet oxygen quantum yields and therefore enhanced photocatalytic activity compared to the phthalocyanines. The zinc phthalocyanines and their gold nanoparticle conjugates were successfully incorporated into electrospun polymer fibers. Spectral characteristics of the functionalized electrospun fibers indicated that the phthalocyanines and phthalocyanine-gold nanoparticle conjugates were bound and their integrity was maintained within the polymeric fiber matrices. The photophysical and photochemical properties of the complexes were equally maintained within the electrospun fibers. The functionalized fibers were applied for the photoconversion of 4-chlorophenol and Orange G as model organic pollutants. , Microsoft� Word 2010 , Adobe Acrobat 9.53 Paper Capture Plug-in
- Full Text:
- Date Issued: 2013
- Authors: Tombe, Sekai Lana
- Date: 2013
- Subjects: Phthalocyanines , Gold , Zinc , Nanoparticles , Bioconjugates , Photochemistry , Photocatalysis , Electrospinning , Polymers , Pollutants , Phenols , Azo dyes
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4293 , http://hdl.handle.net/10962/d1004517 , Phthalocyanines , Gold , Zinc , Nanoparticles , Bioconjugates , Photochemistry , Photocatalysis , Electrospinning , Polymers , Pollutants , Phenols , Azo dyes
- Description: This work presents the syntheses, photophysical and photochemical characterization of arylthio zinc phthalocyanines and their gold nanoparticle conjugates. Spectroscopic and microscopic studies confirmed the formation of the phthalocyanine-gold nanoparticle conjugates which exhibited enhanced photophysicochemical properties in comparison to the phthalocyanines. The studies showed that the presence of gold nanoparticles significantly lowered fluorescence quantum yields and lifetimes. However, this interaction did not restrict the formation of excited singlet and triplet states and hence the formation of singlet oxygen required for photocatalysis. The conjugates showed significantly higher singlet oxygen quantum yields and therefore enhanced photocatalytic activity compared to the phthalocyanines. The zinc phthalocyanines and their gold nanoparticle conjugates were successfully incorporated into electrospun polymer fibers. Spectral characteristics of the functionalized electrospun fibers indicated that the phthalocyanines and phthalocyanine-gold nanoparticle conjugates were bound and their integrity was maintained within the polymeric fiber matrices. The photophysical and photochemical properties of the complexes were equally maintained within the electrospun fibers. The functionalized fibers were applied for the photoconversion of 4-chlorophenol and Orange G as model organic pollutants. , Microsoft� Word 2010 , Adobe Acrobat 9.53 Paper Capture Plug-in
- Full Text:
- Date Issued: 2013
Development of polymer templates for ZnO nanorods
- Authors: Dobson, Stephen Robert
- Date: 2014
- Subjects: Polymers , Semiconductor industry
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10556 , http://hdl.handle.net/10948/d1020805
- Description: One of the biggest challenges for the semiconductor industry is the development of nanofabrication techniques that allow for the fabrication of structures on a scale tens of nanometers in size. This provides greater potential functionality at reduced costs. Established conventional techniques, such as photolithography, are unable to achieve features below 30 nm due to the inherent limitations of the wavelength of light sources currently available. For this reason block copolymers received considerable attention in order to overcome these challenges in lithographic technology. Block copolymers have an inherent processing advantage of self assembling into various nanoscopic structures such as spheres, cylinders and lamellae amongst others on a scale below 50 nm. The dimensions and structures are readily tuneable based on molecular weights (Mw) and compositions of the copolymers. However, to be usable within industry a great deal more research still needs to be conducted on the use and nature of block copolymers. In this study the block copolymer of poly(styrene-block-methylmethacrylate) (PS-b-PMMA) was investigated as a potential nano-mask for semiconductor growth. Research was conducted on thin films of PS-b-PMMA by altering the parameters influencing the kinetics and thermodynamic effects on the thin films, in order to produce a structure of cylinders of PMMA perpendicular to the substrate within a PS matrix on a silicon (Si) substrate. It is shown that thermally annealing the PS-b-PMMA thin films under conditions where there is no preferential interaction of the substrate or open surface with either components of the block copolymer (i.e. PS or PMMA with Si or ambient) and at an appropriate thin film thickness, perpendicular cylinders of PMMA within a PS matrix form in the thin films. The determined ideal thin film thickness is 32 nm, with non-preferential interaction attained between block and substrate by coating a poly(styrene-random-methylmethacrylate) (PS-r-PMMA) on the Si substrate and annealing within a vacuum. Additionally, acetic acid, as a known selective solvent of PMMA, is used to further process the thin film of PS-b-PMMA. Thus a final PS nano-mask containing pores with a diameter tens of nanometers in size is produced. The pores are shown to have an average diameter of 13.5 nm. Measurements were taken throughout the investigation using a scanning probe microscope (SPM) to determine surface topography and phase morphology of the PS-b-PMMA thin films. X-ray reflectometry (XRR) is used to measure film thickness. The research in this study shows that thin films of PS containing hexagonally arranged pores can be produced and could find potential use as a nano-mask for semiconductor growth.
- Full Text:
- Date Issued: 2014
- Authors: Dobson, Stephen Robert
- Date: 2014
- Subjects: Polymers , Semiconductor industry
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10556 , http://hdl.handle.net/10948/d1020805
- Description: One of the biggest challenges for the semiconductor industry is the development of nanofabrication techniques that allow for the fabrication of structures on a scale tens of nanometers in size. This provides greater potential functionality at reduced costs. Established conventional techniques, such as photolithography, are unable to achieve features below 30 nm due to the inherent limitations of the wavelength of light sources currently available. For this reason block copolymers received considerable attention in order to overcome these challenges in lithographic technology. Block copolymers have an inherent processing advantage of self assembling into various nanoscopic structures such as spheres, cylinders and lamellae amongst others on a scale below 50 nm. The dimensions and structures are readily tuneable based on molecular weights (Mw) and compositions of the copolymers. However, to be usable within industry a great deal more research still needs to be conducted on the use and nature of block copolymers. In this study the block copolymer of poly(styrene-block-methylmethacrylate) (PS-b-PMMA) was investigated as a potential nano-mask for semiconductor growth. Research was conducted on thin films of PS-b-PMMA by altering the parameters influencing the kinetics and thermodynamic effects on the thin films, in order to produce a structure of cylinders of PMMA perpendicular to the substrate within a PS matrix on a silicon (Si) substrate. It is shown that thermally annealing the PS-b-PMMA thin films under conditions where there is no preferential interaction of the substrate or open surface with either components of the block copolymer (i.e. PS or PMMA with Si or ambient) and at an appropriate thin film thickness, perpendicular cylinders of PMMA within a PS matrix form in the thin films. The determined ideal thin film thickness is 32 nm, with non-preferential interaction attained between block and substrate by coating a poly(styrene-random-methylmethacrylate) (PS-r-PMMA) on the Si substrate and annealing within a vacuum. Additionally, acetic acid, as a known selective solvent of PMMA, is used to further process the thin film of PS-b-PMMA. Thus a final PS nano-mask containing pores with a diameter tens of nanometers in size is produced. The pores are shown to have an average diameter of 13.5 nm. Measurements were taken throughout the investigation using a scanning probe microscope (SPM) to determine surface topography and phase morphology of the PS-b-PMMA thin films. X-ray reflectometry (XRR) is used to measure film thickness. The research in this study shows that thin films of PS containing hexagonally arranged pores can be produced and could find potential use as a nano-mask for semiconductor growth.
- Full Text:
- Date Issued: 2014
Investigating the effect of various film-forming polymers on the evaporation rate of a volatile component in a cosmetic formulation
- Authors: Barnard, Carla
- Date: 2010
- Subjects: Cosmetic delivery systems , Controlled release preparations , Cosmetics , Polymers , Drugs -- Controlled release
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10377 , http://hdl.handle.net/10948/1498 , Cosmetic delivery systems , Controlled release preparations , Cosmetics , Polymers , Drugs -- Controlled release
- Description: The topical application of many substances, including drugs, enzymes, moisturizers and fragrances, contributes largely to the cosmetic and pharmaceutical industries. These components are often volatile in nature and dissipate in a matter of hours. When considering the different types of slow release systems, an overwhelming variety of these systems is available. Each one of the systems is unique in a way, and is designed to perform a particular function, whether it facilitates the controlled release of an active into the body via the skin surface (transdermal delivery) or whether it reduces the rate of loss of an active from the skin surface to the surrounding environment. For the purpose of this study, a previously existing fixative formulation which is believed to reduce the rate of loss of an active component to the environment, through film formation on the skin surface, was investigated. Alternative ingredients or components were incorporated together with the original fixative formulation ingredients into an experimental design which investigates the effect of each group of the components present. 18 formulations with various concentrations of the components within the groups and specified upper and lower limits for each component were formulated. The fixative properties of the formulations were analysed through the incorporation of a fixed amount of a simple fragrance molecule, 4- methoxybenzaldehyde, into each formulation and evaporation studies were conducted in an environmental room at 28±1° C over a period of 5 hours followed by gas chromatography analysis and finally data analyses using statistical methods. The most efficient fixative formulation was established using regression analysis. The fragrance compound in this formulation was found to evaporate at a rate of 0.47 g/L per hour. The least efficient fixative formulation lead to the loss of 0.78 g/L of the fragrance component per hour. From the calculated fragrance concentrations, the rate constant for each individual fixative formulation could be calculated and response surface 8 modelling by backward regression was used in order to determine how each component contributes to the rate of loss of the fragrance compound. Since the sum of the original ingredient and its alternative was constant, each of the original ingredients was coupled directly to its alternative and no conclusion could be made about the contribution of individual components. By increasing the concentration of Hydroxypropylcellulose (HPC) 100K and its alternative HPC 140K, while keeping the effects of the other components constant, a decrease in the rate of fragrance loss was observed. The same conclusion could be made when increasing the concentrations of PEG-12 Dimethicone and its alternative cetyl dimethicone (decreases the evaporation rate). An interaction took place between HPC 100K and PEG-12 dimethicone and their alternatives. The negative effect was, however, not as strong as the combined positive effect on the rate of fragrance loss of the individual components HPC and PEG-12 dimethicone. Evidence suggested that the removal of the components polyvinylpyrrolidone and its alternative, polyurethane-32 (Baycusan® C1003), would improve the effectiveness of the fixative formulation in terms of its slow release properties. A confirmation experiment established that the exclusion of these components from the fixative formulation does improve the “slow release” properties thereof. A larger, more intricate design is required to investigate the effect of each one of the individual components and where the sum of the components (original and its alternative) is not constant.
- Full Text:
- Date Issued: 2010
- Authors: Barnard, Carla
- Date: 2010
- Subjects: Cosmetic delivery systems , Controlled release preparations , Cosmetics , Polymers , Drugs -- Controlled release
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10377 , http://hdl.handle.net/10948/1498 , Cosmetic delivery systems , Controlled release preparations , Cosmetics , Polymers , Drugs -- Controlled release
- Description: The topical application of many substances, including drugs, enzymes, moisturizers and fragrances, contributes largely to the cosmetic and pharmaceutical industries. These components are often volatile in nature and dissipate in a matter of hours. When considering the different types of slow release systems, an overwhelming variety of these systems is available. Each one of the systems is unique in a way, and is designed to perform a particular function, whether it facilitates the controlled release of an active into the body via the skin surface (transdermal delivery) or whether it reduces the rate of loss of an active from the skin surface to the surrounding environment. For the purpose of this study, a previously existing fixative formulation which is believed to reduce the rate of loss of an active component to the environment, through film formation on the skin surface, was investigated. Alternative ingredients or components were incorporated together with the original fixative formulation ingredients into an experimental design which investigates the effect of each group of the components present. 18 formulations with various concentrations of the components within the groups and specified upper and lower limits for each component were formulated. The fixative properties of the formulations were analysed through the incorporation of a fixed amount of a simple fragrance molecule, 4- methoxybenzaldehyde, into each formulation and evaporation studies were conducted in an environmental room at 28±1° C over a period of 5 hours followed by gas chromatography analysis and finally data analyses using statistical methods. The most efficient fixative formulation was established using regression analysis. The fragrance compound in this formulation was found to evaporate at a rate of 0.47 g/L per hour. The least efficient fixative formulation lead to the loss of 0.78 g/L of the fragrance component per hour. From the calculated fragrance concentrations, the rate constant for each individual fixative formulation could be calculated and response surface 8 modelling by backward regression was used in order to determine how each component contributes to the rate of loss of the fragrance compound. Since the sum of the original ingredient and its alternative was constant, each of the original ingredients was coupled directly to its alternative and no conclusion could be made about the contribution of individual components. By increasing the concentration of Hydroxypropylcellulose (HPC) 100K and its alternative HPC 140K, while keeping the effects of the other components constant, a decrease in the rate of fragrance loss was observed. The same conclusion could be made when increasing the concentrations of PEG-12 Dimethicone and its alternative cetyl dimethicone (decreases the evaporation rate). An interaction took place between HPC 100K and PEG-12 dimethicone and their alternatives. The negative effect was, however, not as strong as the combined positive effect on the rate of fragrance loss of the individual components HPC and PEG-12 dimethicone. Evidence suggested that the removal of the components polyvinylpyrrolidone and its alternative, polyurethane-32 (Baycusan® C1003), would improve the effectiveness of the fixative formulation in terms of its slow release properties. A confirmation experiment established that the exclusion of these components from the fixative formulation does improve the “slow release” properties thereof. A larger, more intricate design is required to investigate the effect of each one of the individual components and where the sum of the components (original and its alternative) is not constant.
- Full Text:
- Date Issued: 2010
Polymers, catalysts and nanostructures a hybrid approach to biomolecule detection
- Authors: Frith, Kelly-Anne
- Date: 2009
- Subjects: Polymers , Nanostructured materials , Biomolecules , Tryptophan , Melatonin , Electrodes , Electrochemistry , Tryptophan oxygenase
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3980 , http://hdl.handle.net/10962/d1004039 , Polymers , Nanostructured materials , Biomolecules , Tryptophan , Melatonin , Electrodes , Electrochemistry , Tryptophan oxygenase
- Description: The main goals in electroanalytical sensing are towards improved sensitivity and selectivity, or specificity, of an analyte. There are several approaches to achieving these goals with the main approach being modification of an electrode surface with synthetic or natural catalysts (enzymes), polymers and also utilisation of nanostructured materials. At present, there is a strong movement towards hybrid sensing which couple different properties of two or more surface modification approaches. In this thesis, a range of these surface modifications were explored for analysis and detection of two main analytes: the amino acid, tryptophan (Trp); and, the neurotransmitter, dopamine (DA). Specifically, this thesis aimed to utilise these methods to enhance the sensitivity and selectivity for Trp over an interferent, the indoleamine, melatonin (Mel); and, DA over the vitamin, ascorbic acid (AA). For Trp detection, immobilisation of an enzyme, Tryptophanase (Trpase) resulted in poor selectivity for the analyte. However, enhanced sensitivity and selectivity was achieved through pH manipulation of the electrolyte medium at a Nafion®-modified electrode surface for both Trp and Mel. At pH 3.0, the Mel and Trp anodic peak potentials were sufficiently resolved allowing for an LOD of 1.60 and 1.62 nM,respectively, and permitting the accurate analysis of Trp in a dietary supplement containing Mel. Multi-walled carbon nanotubes (MWCNTs) suspended in Nafion® exhibited further increases in the signal responses of these analytes at pH 3.0 and 7.4 with minimal change in the resolution of the anodic peaks. A lower sensitivity was, therefore, observed at the Nafion® and MWCNT modified electrode compared to the Nafion®-modified electrode at pH 3.0 with LODs of 0.59 and 0.80 nM exhibited for Trp and Mel, respectively. Enhanced selectivity for Trp in the presence of Mel can be achieved with MWCNTs in the presence of metallotetrasulphonated phthalocyanines (MTSPcs) particularly at pH 3.0, owing to cation exchange effects. However, the lack of sensitivity towards Trp, and even Mel, at this CoTSPc and MWCNT modified electrode remains a drawback. For DA, detection at the MWCNT and Nafion® surface resulted in improved sensitivity over that of both the bare electrode (613.0 nM) and the Nafion® modified electrode (1045.1 nM) with a calculated LOD of 133.9 nM at this layer. Furthermore, improvements in the selectivity of DA were achieved at the Nafion® and MWCNT modified electrode as exclusion of AA (150 μM) was achieved. At the MWCNT and CoTSPc surface, AA was excluded up to 130 μM with sensitivity for DA extending as low as 14.3 nM, far greater than observed for Trp and Mel. These concentrations are well within physiological concentration ranges and represent the most significant solution yet in terms of AA exclusion and enhanced sensitivity for DA. An examination of the surface layering by impedance spectroscopy and atomic force microscopy indicates that the success of the hybrid sensor utilising CoTSPc and MWCNTs lay in improved dispersion of MWCNTs and improved electron transfer kinetics, facilitated by the net charge of the materials present. This thesis, thus, showed the utility of a judicious selection of synthetic and biological catalysts, polymers and carbon nanomaterials towards a hybrid approach to the electrochemical sensing of Trp, Mel, DA and AA with focus on sensitivity and selectivity of these analytes.
- Full Text:
- Date Issued: 2009
- Authors: Frith, Kelly-Anne
- Date: 2009
- Subjects: Polymers , Nanostructured materials , Biomolecules , Tryptophan , Melatonin , Electrodes , Electrochemistry , Tryptophan oxygenase
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3980 , http://hdl.handle.net/10962/d1004039 , Polymers , Nanostructured materials , Biomolecules , Tryptophan , Melatonin , Electrodes , Electrochemistry , Tryptophan oxygenase
- Description: The main goals in electroanalytical sensing are towards improved sensitivity and selectivity, or specificity, of an analyte. There are several approaches to achieving these goals with the main approach being modification of an electrode surface with synthetic or natural catalysts (enzymes), polymers and also utilisation of nanostructured materials. At present, there is a strong movement towards hybrid sensing which couple different properties of two or more surface modification approaches. In this thesis, a range of these surface modifications were explored for analysis and detection of two main analytes: the amino acid, tryptophan (Trp); and, the neurotransmitter, dopamine (DA). Specifically, this thesis aimed to utilise these methods to enhance the sensitivity and selectivity for Trp over an interferent, the indoleamine, melatonin (Mel); and, DA over the vitamin, ascorbic acid (AA). For Trp detection, immobilisation of an enzyme, Tryptophanase (Trpase) resulted in poor selectivity for the analyte. However, enhanced sensitivity and selectivity was achieved through pH manipulation of the electrolyte medium at a Nafion®-modified electrode surface for both Trp and Mel. At pH 3.0, the Mel and Trp anodic peak potentials were sufficiently resolved allowing for an LOD of 1.60 and 1.62 nM,respectively, and permitting the accurate analysis of Trp in a dietary supplement containing Mel. Multi-walled carbon nanotubes (MWCNTs) suspended in Nafion® exhibited further increases in the signal responses of these analytes at pH 3.0 and 7.4 with minimal change in the resolution of the anodic peaks. A lower sensitivity was, therefore, observed at the Nafion® and MWCNT modified electrode compared to the Nafion®-modified electrode at pH 3.0 with LODs of 0.59 and 0.80 nM exhibited for Trp and Mel, respectively. Enhanced selectivity for Trp in the presence of Mel can be achieved with MWCNTs in the presence of metallotetrasulphonated phthalocyanines (MTSPcs) particularly at pH 3.0, owing to cation exchange effects. However, the lack of sensitivity towards Trp, and even Mel, at this CoTSPc and MWCNT modified electrode remains a drawback. For DA, detection at the MWCNT and Nafion® surface resulted in improved sensitivity over that of both the bare electrode (613.0 nM) and the Nafion® modified electrode (1045.1 nM) with a calculated LOD of 133.9 nM at this layer. Furthermore, improvements in the selectivity of DA were achieved at the Nafion® and MWCNT modified electrode as exclusion of AA (150 μM) was achieved. At the MWCNT and CoTSPc surface, AA was excluded up to 130 μM with sensitivity for DA extending as low as 14.3 nM, far greater than observed for Trp and Mel. These concentrations are well within physiological concentration ranges and represent the most significant solution yet in terms of AA exclusion and enhanced sensitivity for DA. An examination of the surface layering by impedance spectroscopy and atomic force microscopy indicates that the success of the hybrid sensor utilising CoTSPc and MWCNTs lay in improved dispersion of MWCNTs and improved electron transfer kinetics, facilitated by the net charge of the materials present. This thesis, thus, showed the utility of a judicious selection of synthetic and biological catalysts, polymers and carbon nanomaterials towards a hybrid approach to the electrochemical sensing of Trp, Mel, DA and AA with focus on sensitivity and selectivity of these analytes.
- Full Text:
- Date Issued: 2009
Synthesis, photophysicochemical properties and photodynamic therapy activities of indium and zinc phthalocyanines when incorporated into Pluronic polymer micelles
- Authors: Motloung, Banele Mike
- Date: 2020
- Subjects: Indium , Zinc , Phthalocyanines , Polymers , Photochemotherapy , Micelles
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/167529 , vital:41489
- Description: This thesis reports on the syntheses, photophysicochemical properties and photodynamic therapy activities of symmetrical metallophthalocyanines (MPcs) when alone or when incorporated into Pluronic polymer micelles. The Pcs contain either zinc or indium as central metals and have phenyldiazenylphenoxy, pyridine-2-yloxy and benzo[d]thiazol-2-ylthio as ring substituents. Spectroscopic and microscopic techniques were used to confirm the formation MPcs with micelles. The photophysics and photochemistry of the Pcs were assessed when alone and with micelles. All the studied Pcs showed good photophysicochemical behavior with relatively high triplet and singlet oxygen quantum yields corresponding to their low fluorescence quantum yields. The Pcs with indium in their central cavity exhibited higher triplet and singlet oxygen quantum yields in comparison to their zinc counterparts due to the heavy atom effect obtained from the former. The in vitro dark cytotoxicity and photodynamic therapy of the Pc complexes and conjugates against MCF7 cells was tested. All studied Pc complexes alone and with micelles showed minimum dark toxicity making them applicable for PDT. All complexes displayed good phototoxicity < 50% cell viability (except for complex 2 > 50% cell viability) at concentrations ≤100 μg/mL, however the conjugates showed < 45% cell viability at concentrations ≤ 100 μg/mL, probably due to the small micellar size and EPR effect. The findings from this work show the importance of incorporating photosensitizers such as phthalocyanines into Pluronic polymers micelles and making them water soluble and ultimately improving their photodynamic effect.
- Full Text:
- Date Issued: 2020
- Authors: Motloung, Banele Mike
- Date: 2020
- Subjects: Indium , Zinc , Phthalocyanines , Polymers , Photochemotherapy , Micelles
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/167529 , vital:41489
- Description: This thesis reports on the syntheses, photophysicochemical properties and photodynamic therapy activities of symmetrical metallophthalocyanines (MPcs) when alone or when incorporated into Pluronic polymer micelles. The Pcs contain either zinc or indium as central metals and have phenyldiazenylphenoxy, pyridine-2-yloxy and benzo[d]thiazol-2-ylthio as ring substituents. Spectroscopic and microscopic techniques were used to confirm the formation MPcs with micelles. The photophysics and photochemistry of the Pcs were assessed when alone and with micelles. All the studied Pcs showed good photophysicochemical behavior with relatively high triplet and singlet oxygen quantum yields corresponding to their low fluorescence quantum yields. The Pcs with indium in their central cavity exhibited higher triplet and singlet oxygen quantum yields in comparison to their zinc counterparts due to the heavy atom effect obtained from the former. The in vitro dark cytotoxicity and photodynamic therapy of the Pc complexes and conjugates against MCF7 cells was tested. All studied Pc complexes alone and with micelles showed minimum dark toxicity making them applicable for PDT. All complexes displayed good phototoxicity < 50% cell viability (except for complex 2 > 50% cell viability) at concentrations ≤100 μg/mL, however the conjugates showed < 45% cell viability at concentrations ≤ 100 μg/mL, probably due to the small micellar size and EPR effect. The findings from this work show the importance of incorporating photosensitizers such as phthalocyanines into Pluronic polymers micelles and making them water soluble and ultimately improving their photodynamic effect.
- Full Text:
- Date Issued: 2020
The development of platinum and palladium-selective polymeric materials
- Authors: Fayemi, Omolola Esther
- Date: 2013 , 2013-05-03
- Subjects: Polymers , Platinum , Palladium , Adsorption , Sorbents , Nanofibers , Amines , Nanoparticles
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4287 , http://hdl.handle.net/10962/d1002964 , Polymers , Platinum , Palladium , Adsorption , Sorbents , Nanofibers , Amines , Nanoparticles
- Description: The adsorption and separation of platinum(IV) and palladium(II) chlorido species (PtCl₆²⁻ and PdCl₄²⁻) on polystyrene-based beads and nanofibers as well as silica microparticles functionalized with polyamine centres derived from ethylenediamine (EDA), diethylenetriamine (DETA), triethylenetriamine (TETA) and tris-(2-aminoethyl)amine (TAEA) is described. The functionalized sorbent materials were characterized by using microanalysis, SEM, XPS, BET and FTIR. The nanofiber sorbent material functionalized with ethylenediamine (F-EDA) had the highest loading capacity which was attributed to its high nitrogen content (10.83%) and larger surface area (241.3m²/g). The adsorption and loading capacities of the sorption materials were investigated using both the batch and column studies in 1 M HCI. The adsorption studies for both PtCl₆²⁻ and PdCl₄²⁻ on the polystyrene-based sorbent materials fit the Langmuir isotherm while the silica-based sorbents fitted the Freundlich isotherm with R² values > 0.99. In the column experiment the highest loading capacity of Pt and Pd were 7.4 mg/g and 4.3 mg/g respectively on the nanofiber sorbent material based on ethylenediamine (EDA). The polystyrene and silica-based resins with triethylenetetramine (TETA) functionality (M-TETA and S-TETA) showed selectivity for platinum and palladium, respectively. Metal chlorido complexes loaded on the sorbent materials were recovered by using 3% m/v thiourea solution as teh eluting agent with quantitative desorption efficiency under the selected experimental conditions. The separation of platinum from palladium was partially achieved by selective stripping of PtCl₆²⁻ with 0.5 M of NaClO₄ in 1.0 M HCI with PdCl₄²⁻ was eluted with 0.5 M thiourea in 1.0 M HCI. The selectivity of the M-TETA and S-TETA sorbent materials was proved by column separation of platinum(IV) and palladium(II), respectively, from synthetic solutions containing iridium(IV) and rhodium(III). The loading capacity for platinum on M-TETA was 0.09 mg/g while it was 0.27 mg/g for palladium on S-TETA. , Acrobat PDFMaker 10.1 for Word , Adobe Acrobat 9.54 Paper Capture Plug-in
- Full Text:
- Date Issued: 2013
- Authors: Fayemi, Omolola Esther
- Date: 2013 , 2013-05-03
- Subjects: Polymers , Platinum , Palladium , Adsorption , Sorbents , Nanofibers , Amines , Nanoparticles
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4287 , http://hdl.handle.net/10962/d1002964 , Polymers , Platinum , Palladium , Adsorption , Sorbents , Nanofibers , Amines , Nanoparticles
- Description: The adsorption and separation of platinum(IV) and palladium(II) chlorido species (PtCl₆²⁻ and PdCl₄²⁻) on polystyrene-based beads and nanofibers as well as silica microparticles functionalized with polyamine centres derived from ethylenediamine (EDA), diethylenetriamine (DETA), triethylenetriamine (TETA) and tris-(2-aminoethyl)amine (TAEA) is described. The functionalized sorbent materials were characterized by using microanalysis, SEM, XPS, BET and FTIR. The nanofiber sorbent material functionalized with ethylenediamine (F-EDA) had the highest loading capacity which was attributed to its high nitrogen content (10.83%) and larger surface area (241.3m²/g). The adsorption and loading capacities of the sorption materials were investigated using both the batch and column studies in 1 M HCI. The adsorption studies for both PtCl₆²⁻ and PdCl₄²⁻ on the polystyrene-based sorbent materials fit the Langmuir isotherm while the silica-based sorbents fitted the Freundlich isotherm with R² values > 0.99. In the column experiment the highest loading capacity of Pt and Pd were 7.4 mg/g and 4.3 mg/g respectively on the nanofiber sorbent material based on ethylenediamine (EDA). The polystyrene and silica-based resins with triethylenetetramine (TETA) functionality (M-TETA and S-TETA) showed selectivity for platinum and palladium, respectively. Metal chlorido complexes loaded on the sorbent materials were recovered by using 3% m/v thiourea solution as teh eluting agent with quantitative desorption efficiency under the selected experimental conditions. The separation of platinum from palladium was partially achieved by selective stripping of PtCl₆²⁻ with 0.5 M of NaClO₄ in 1.0 M HCI with PdCl₄²⁻ was eluted with 0.5 M thiourea in 1.0 M HCI. The selectivity of the M-TETA and S-TETA sorbent materials was proved by column separation of platinum(IV) and palladium(II), respectively, from synthetic solutions containing iridium(IV) and rhodium(III). The loading capacity for platinum on M-TETA was 0.09 mg/g while it was 0.27 mg/g for palladium on S-TETA. , Acrobat PDFMaker 10.1 for Word , Adobe Acrobat 9.54 Paper Capture Plug-in
- Full Text:
- Date Issued: 2013
- «
- ‹
- 1
- ›
- »