A mineralogical, geochemical and metallogenic study of unusual Mn/Na/Ba assemblages at the footwall of conglomeratic iron-ore at farm Langverwacht, Northern Cape Province of South Africa
- Authors: Bursey, James Rodney
- Date: 2018
- Subjects: Iron ores -- Geology -- South Africa -- Northern Cape , Conglomerate -- South Africa -- Northern Cape , Petrology -- South Africa -- Northern Cape , Manganese -- South Africa -- Northern Cape , Sodium -- South Africa -- Northern Cape , Barium -- South Africa -- Northern Cape
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/62516 , vital:28201
- Description: The Postmasburg Manganese Field (PMF), located in the Northern Cape province of South Africa, plays host to significant deposits of iron and manganese that have been utilized since their discovery in 1922 by Captain L.T. Shone. Further afield, lies the massive high-grade manganese deposit of the Kalahari Manganese Field (KMF), which drew attention away from the PMF after its discovery. These deposits are not limited to iron and manganese ore, but contain significant assemblages of alkali-rich rocks - which is the focus of this study. The existence of alkali-rich assemblages beneath conglomeratic iron-ore on farm Langwervacht, has come under investigation in this study, and in particular, the enrichment of these rocks in Ba, Na and Mn. Petrographic analysis of the clast-supported conglomerate unit (ore-zone), has uncovered the presence of vugs (up to 8mm across) which contain barite, K-feldspar and fluorapatite. In addition to this, the ore-zone of one of the three boreholes contains late carbonate veins (kutnohorite), which travel along Fe-clast boundaries, and exploit clast-fractures and areas of weakness. Further down, within the ‘enriched-zone’ of alkalis, the mineralogy is more diverse - containing elevated concentrations of Ba, Na and Mn. Seventeen distinct minerals containing these three key elements have been identified - along with one solid-solution series in the form of hollandite-coronadite. The existence of minerals such as natrolite, aegirine, albite, banalsite, barite, serandite, celsian and hollandite-coronadite are indicative of hydrothermal activity having influenced these rocks. Bulk-geochemistry was used to compare the major and trace elements of each borehole and the associated units. Both the trace elements and the REE’s from the ore-zone are enriched by an average of 5-10x relative to the BIF standard used - which immediately suggests an influx of elements. Compared to PAAS (Post Archaean Australian Shales), the ore-zone REE’s are slightly depleted, but more importantly the profiles are very similar to that of the Mapedi shales achieved in previous studies. This result points towards a strong shale influence in the ore-zone protolith. Expectedly, many of the enriched-zone trace elements and REE’s show far greater enrichment than what is observed in the ore-zone. Trace and Rare Earth Element profiles between the ore-zone and the enriched-zone are, however, generally correlative, with profiles reflecting similar enrichments and depletions for a given element - even within different rock units. This suggests that the hydrothermal fluid has moved in a general upward direction, reacting with host-rock units, and relinquishing elements carried in solution - wherever conditions have been favourable for the accommodation of these elements. This study has shed light on the relationship between the ore-zone and the enriched-zone, and results suggest that the process of alkali enrichment is not directly related to the process of upgrading of the iron ores. This is due to the extent of the alkali-enrichment below the ore-zone, as well as enrichment factors in some trace elements being superior to that of Fe2O3 in the ore- zone. Hence, both of these zones have both been affected by a later hydrothermal fluid. The source of the fluid is likely a mature basinal brine, of oxidized, alkaline nature - which leached elements (Ba, K, Na, Pb, Ca) from older rocks, and carried them in solution. On a local-scale, this fluid has exploited areas of weakness in the form of fractures, less consolidated conglomeratic material and crosscutting veins. Manganese and iron has been remobilized on a local scale - producing secondary textures and partitioning into phases such as Mn-rich calcite and serandite. Comparisons to other studies in the PMF and KMF have revealed very similar alkali-rich assemblages, bearing many of the same minerals observed in this study - even within more manganiferous deposits. These findings have led to suggestions of a possible regional-scale hydrothermal overprint, which may have imparted a similar geochemical signal over the entire region - with the assistance of faults and unconformities. Of course, proving this is no mean feat, but current work on the source of barium in barite, using Sr isotopes from samples across the region may shed light on the source of at least one key element of these deposits.
- Full Text:
- Date Issued: 2018
- Authors: Bursey, James Rodney
- Date: 2018
- Subjects: Iron ores -- Geology -- South Africa -- Northern Cape , Conglomerate -- South Africa -- Northern Cape , Petrology -- South Africa -- Northern Cape , Manganese -- South Africa -- Northern Cape , Sodium -- South Africa -- Northern Cape , Barium -- South Africa -- Northern Cape
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/62516 , vital:28201
- Description: The Postmasburg Manganese Field (PMF), located in the Northern Cape province of South Africa, plays host to significant deposits of iron and manganese that have been utilized since their discovery in 1922 by Captain L.T. Shone. Further afield, lies the massive high-grade manganese deposit of the Kalahari Manganese Field (KMF), which drew attention away from the PMF after its discovery. These deposits are not limited to iron and manganese ore, but contain significant assemblages of alkali-rich rocks - which is the focus of this study. The existence of alkali-rich assemblages beneath conglomeratic iron-ore on farm Langwervacht, has come under investigation in this study, and in particular, the enrichment of these rocks in Ba, Na and Mn. Petrographic analysis of the clast-supported conglomerate unit (ore-zone), has uncovered the presence of vugs (up to 8mm across) which contain barite, K-feldspar and fluorapatite. In addition to this, the ore-zone of one of the three boreholes contains late carbonate veins (kutnohorite), which travel along Fe-clast boundaries, and exploit clast-fractures and areas of weakness. Further down, within the ‘enriched-zone’ of alkalis, the mineralogy is more diverse - containing elevated concentrations of Ba, Na and Mn. Seventeen distinct minerals containing these three key elements have been identified - along with one solid-solution series in the form of hollandite-coronadite. The existence of minerals such as natrolite, aegirine, albite, banalsite, barite, serandite, celsian and hollandite-coronadite are indicative of hydrothermal activity having influenced these rocks. Bulk-geochemistry was used to compare the major and trace elements of each borehole and the associated units. Both the trace elements and the REE’s from the ore-zone are enriched by an average of 5-10x relative to the BIF standard used - which immediately suggests an influx of elements. Compared to PAAS (Post Archaean Australian Shales), the ore-zone REE’s are slightly depleted, but more importantly the profiles are very similar to that of the Mapedi shales achieved in previous studies. This result points towards a strong shale influence in the ore-zone protolith. Expectedly, many of the enriched-zone trace elements and REE’s show far greater enrichment than what is observed in the ore-zone. Trace and Rare Earth Element profiles between the ore-zone and the enriched-zone are, however, generally correlative, with profiles reflecting similar enrichments and depletions for a given element - even within different rock units. This suggests that the hydrothermal fluid has moved in a general upward direction, reacting with host-rock units, and relinquishing elements carried in solution - wherever conditions have been favourable for the accommodation of these elements. This study has shed light on the relationship between the ore-zone and the enriched-zone, and results suggest that the process of alkali enrichment is not directly related to the process of upgrading of the iron ores. This is due to the extent of the alkali-enrichment below the ore-zone, as well as enrichment factors in some trace elements being superior to that of Fe2O3 in the ore- zone. Hence, both of these zones have both been affected by a later hydrothermal fluid. The source of the fluid is likely a mature basinal brine, of oxidized, alkaline nature - which leached elements (Ba, K, Na, Pb, Ca) from older rocks, and carried them in solution. On a local-scale, this fluid has exploited areas of weakness in the form of fractures, less consolidated conglomeratic material and crosscutting veins. Manganese and iron has been remobilized on a local scale - producing secondary textures and partitioning into phases such as Mn-rich calcite and serandite. Comparisons to other studies in the PMF and KMF have revealed very similar alkali-rich assemblages, bearing many of the same minerals observed in this study - even within more manganiferous deposits. These findings have led to suggestions of a possible regional-scale hydrothermal overprint, which may have imparted a similar geochemical signal over the entire region - with the assistance of faults and unconformities. Of course, proving this is no mean feat, but current work on the source of barium in barite, using Sr isotopes from samples across the region may shed light on the source of at least one key element of these deposits.
- Full Text:
- Date Issued: 2018
A mineralogical study of phosphate mineralisation in the Nkombwa Hill Carbonatite
- Authors: Mapholi, Thendo
- Date: 2021-10-29
- Subjects: To be added
- Language: English
- Type: thesis , text , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/294797 , vital:57256
- Description: Thesis embargoed. Release date October 2023. , Thesis (MSc) -- Faculty of Science, Geology, 2021
- Full Text:
- Date Issued: 2021-10-29
- Authors: Mapholi, Thendo
- Date: 2021-10-29
- Subjects: To be added
- Language: English
- Type: thesis , text , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/294797 , vital:57256
- Description: Thesis embargoed. Release date October 2023. , Thesis (MSc) -- Faculty of Science, Geology, 2021
- Full Text:
- Date Issued: 2021-10-29
A mineralogical investigation of co-existing iron-titanium oxides from various igneous rocks with special reference to some South African titaniferous iron ores
- Authors: Reynolds, Ivan Melvin
- Date: 1979
- Subjects: Igneous rocks Mineralogy
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4926 , http://hdl.handle.net/10962/d1004589
- Description: Part I consists of a detailied review of the available literature on the Fe- Ti oxides and their solid solution relationships. Particular attention is glven to the microstructures exhibited by these oxides and the hypotheses put forward to explain them. These data are synthesised and models are presented in which the microstructural developments in titaniferous magnetites amd ilmenites are explained in terms of current ideas on the influence of oxygen fugacity, exsolution mechanisms and crystal chemistry. These models have direct application to the microintergrowths observed in the naturally occurring Fe-Ti oxides from a wide range of igneous rocks. The available data on the minor and trace element chemistry of the Fe-Ti oxides are reviewed with particular reference to their variation in these minerals from different host rocks. The behaviour of the Fe-Ti oxides during secondary oxidation is discussed with particular reference to the oxidation of titaniferous magnetite and the weathering of ilmenite. The results of a mineralogical investigation into the co-existing Fe-Ti oxides from a range of igneous rocks including kimberlites, gabbros, dolerites, diabases, syenites, granophyres, granites and pegmatites are presented in Part 2 together with data on the ilmenites present in certain Eastern Cape beach sands. The kimberlite ilmenites are chemically distinct and can be readily distinguished on the basis of their relatively high MgO, Fe₂0₃ and Cr₂O₃ contents. They can also be distinguished from ilmenites from other igneous rocks on the basis of unit cell dimensions, d-spacings, reflectivities and micro-indentation hardness. The ilmenites from a wide range of basic to granitic igneous rocks exhibit a limited compositional range in which the MnO content appears to increase with increasing Si0₂ content. Relatively insensitive indirectly determined parameters such as unit cell dimensions, reflectivities and micro-indentation hardnesses cannot be used to distinguish between the ilmenites from the different rock types in these classes. The titaniferous magnetites exhibit progressively decreasing Ti0₂ contents from a maximum in the basic igneous rocks to a minimum in the granitic types. The titaniferous magnetite typically exhibits varying degrees of deuteric alteration, while the microstructures developed can be interpreted 1n terms of the models presented in Part 1. Part 3 represents an extension of Part 2 and deals with a mineralogical investigation of the titaniferous iron ores in five South African basic intrusions. The Bushveld and Kaffirskraal ores consist of multi-phase titaniferous magnetite grains containing crystallographically oriented ilmenite, ulvospinel and pleonaste microintergrowths. Minor coarser-grained ilmenite is also present. The Usushwana ores are texturally similar but contain abundant lamellar ilmenite in place of the ulvospinel. The primary features are well preserved in the unmetamorphosed Bushveld and Kaffirskraal ores. The Usushwana ores have been slightly metamorphosed resulting in the extensive replacement of the titaniferous magnetites by sphene and chlorite aggregates. The ores from these three complexes cannot be beneficiated by conventional ore-dressing techniques and require direct metallurgical treatment for the recovery of Fe, Ti0₂ and V₂O₅. The metamorphosed Mambula and Rooiwater ores have been recrystallised to a varying degrees and consist of multi-phase titaniferous magnetite grains containing modified ilmenite and pleonaste microintergrowths. These modified microstructures differ from those encountered in titaniferous magnetites from unmetnmorphosed basic rocks and their degree of modification can be related to the degree of met amorphism. Variable amounts of coarse granular ilmenite are also present and their development is related to the metamorphic grade and degree of recrystallisation. These ores can be partially beneficiated to yield ilmenite- and lower-Ti0₂ magnetite concentrates in which V₂O₅ contents of the magnetic fractions are higher than those of the original ores. The Trompsburg ores differ from those of the other complexes in that they are Mg-rich and are characterised by the presence of abundant olivine. The titaniferous magnetites typically exhibit well-defined ulvospinel cloth textures and are often surrounded by small amounts of graphite. They show evidence of a variety of extensive late-stage alteration features. The ores from the five investigated complexes are compared with similar ores from the Bushveld Complex. The ores from each complex can be readily distinguished on the basis of their chemical compositions and textural relationships. These features can be related to their crystallisation his tories and, in some cases, to post-crystallisation processes. The microstructural evolution of the ores from each complex is interpreted in terms of the models developed in Part I.
- Full Text:
- Date Issued: 1979
- Authors: Reynolds, Ivan Melvin
- Date: 1979
- Subjects: Igneous rocks Mineralogy
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4926 , http://hdl.handle.net/10962/d1004589
- Description: Part I consists of a detailied review of the available literature on the Fe- Ti oxides and their solid solution relationships. Particular attention is glven to the microstructures exhibited by these oxides and the hypotheses put forward to explain them. These data are synthesised and models are presented in which the microstructural developments in titaniferous magnetites amd ilmenites are explained in terms of current ideas on the influence of oxygen fugacity, exsolution mechanisms and crystal chemistry. These models have direct application to the microintergrowths observed in the naturally occurring Fe-Ti oxides from a wide range of igneous rocks. The available data on the minor and trace element chemistry of the Fe-Ti oxides are reviewed with particular reference to their variation in these minerals from different host rocks. The behaviour of the Fe-Ti oxides during secondary oxidation is discussed with particular reference to the oxidation of titaniferous magnetite and the weathering of ilmenite. The results of a mineralogical investigation into the co-existing Fe-Ti oxides from a range of igneous rocks including kimberlites, gabbros, dolerites, diabases, syenites, granophyres, granites and pegmatites are presented in Part 2 together with data on the ilmenites present in certain Eastern Cape beach sands. The kimberlite ilmenites are chemically distinct and can be readily distinguished on the basis of their relatively high MgO, Fe₂0₃ and Cr₂O₃ contents. They can also be distinguished from ilmenites from other igneous rocks on the basis of unit cell dimensions, d-spacings, reflectivities and micro-indentation hardness. The ilmenites from a wide range of basic to granitic igneous rocks exhibit a limited compositional range in which the MnO content appears to increase with increasing Si0₂ content. Relatively insensitive indirectly determined parameters such as unit cell dimensions, reflectivities and micro-indentation hardnesses cannot be used to distinguish between the ilmenites from the different rock types in these classes. The titaniferous magnetites exhibit progressively decreasing Ti0₂ contents from a maximum in the basic igneous rocks to a minimum in the granitic types. The titaniferous magnetite typically exhibits varying degrees of deuteric alteration, while the microstructures developed can be interpreted 1n terms of the models presented in Part 1. Part 3 represents an extension of Part 2 and deals with a mineralogical investigation of the titaniferous iron ores in five South African basic intrusions. The Bushveld and Kaffirskraal ores consist of multi-phase titaniferous magnetite grains containing crystallographically oriented ilmenite, ulvospinel and pleonaste microintergrowths. Minor coarser-grained ilmenite is also present. The Usushwana ores are texturally similar but contain abundant lamellar ilmenite in place of the ulvospinel. The primary features are well preserved in the unmetamorphosed Bushveld and Kaffirskraal ores. The Usushwana ores have been slightly metamorphosed resulting in the extensive replacement of the titaniferous magnetites by sphene and chlorite aggregates. The ores from these three complexes cannot be beneficiated by conventional ore-dressing techniques and require direct metallurgical treatment for the recovery of Fe, Ti0₂ and V₂O₅. The metamorphosed Mambula and Rooiwater ores have been recrystallised to a varying degrees and consist of multi-phase titaniferous magnetite grains containing modified ilmenite and pleonaste microintergrowths. These modified microstructures differ from those encountered in titaniferous magnetites from unmetnmorphosed basic rocks and their degree of modification can be related to the degree of met amorphism. Variable amounts of coarse granular ilmenite are also present and their development is related to the metamorphic grade and degree of recrystallisation. These ores can be partially beneficiated to yield ilmenite- and lower-Ti0₂ magnetite concentrates in which V₂O₅ contents of the magnetic fractions are higher than those of the original ores. The Trompsburg ores differ from those of the other complexes in that they are Mg-rich and are characterised by the presence of abundant olivine. The titaniferous magnetites typically exhibit well-defined ulvospinel cloth textures and are often surrounded by small amounts of graphite. They show evidence of a variety of extensive late-stage alteration features. The ores from the five investigated complexes are compared with similar ores from the Bushveld Complex. The ores from each complex can be readily distinguished on the basis of their chemical compositions and textural relationships. These features can be related to their crystallisation his tories and, in some cases, to post-crystallisation processes. The microstructural evolution of the ores from each complex is interpreted in terms of the models developed in Part I.
- Full Text:
- Date Issued: 1979
A mineral systems approach to the development of structural targeting criteria for orogenic gold deposits in the Asankrangwa gold belt of the Kumasi Basin, South-west Ghana
- Authors: Gelber, Benjamin D J
- Date: 2018
- Subjects: Gold ores -- Geology -- Ghana -- Kumasi , Gold mines and mining -- Ghana -- Kumasi , Asankrangwa (Ghana) , Geodynamics -- Ghana -- Kumasi , Prospecting -- Geophysical methods , Orogenic belts -- Ghana -- Kumasi
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/63143 , vital:28367
- Description: The Kumasi Basin in South-west Ghana lies at the centre of the best-endowed Paleoproterozoic gold province in the world. The Kumasi Basin and margins of the adjacent volcanic belts are host to six world class gold camps: (1) 62 Moz Obuasi camp, (2) 22 Moz Prestea-Bogoso camp, (3) 11 Moz Asanko Gold Mine camp, (4) 9 Moz Edikan camp, (5) 7 Moz Bibiani camp, (6) 5 Moz Chirano camp, as well as several additional minor gold camps and many more prospects. Cumulatively these camps account for>116 Moz of endowment and contribute to making south-west Ghana the greatest Paleoproterozoic gold province in the world. Gold deposits in the Kumasi Basin are shear zone hosted and mineralisation ranges from disseminated to massive sulphide refractory deposits, to free milling quartz vein style deposits. Structural relationships and age dating indicate that most deposits are genetically related and were formed during a single episode of gold mineralisation during the D4 NNW-SSE crustal shortening deformation event of the Eburnean Orogeny (2125 – 1980 Ma). The understanding of structural controls on mineralisation is critical for exploration success as it allows exploration to focus on areas where these structural controls exist. This study uses a mineral systems approach to understand the relationship between the geodynamic history and structural controls on gold mineralisation in the Kumasi Basin at various scales, and define targeting criteria which can be applied for the purpose of developing predictive exploration models for making new discoveries in the Asanko Gold Mine camp located in the Asankrangwa Belt. The study used a quantitative analysis to establish residual endowment potential in the Asankrangwa Belt, providing the basis for a business model and resulting exploration strategy. Once established, a Fry autocorrelation analysis was applied to identify trends in deposit and camp spatial distribution to which critical geological processes were ascribed. Observed trends were mapped from multi-scale geophysical data sets and through interpretation of existing geophysical structure models, and structural criteria for targeting orogenic gold deposits at the regional and camp scales were developed. Results show that different structural controls on mineralisation act at the regional and camp scale. At the regional scale the distribution of gold camps was found to be controlled by fundamental N-S and NW-SE basement structures with gold camps forming where they intersect NE-SW first and second order structural corridors. At the Asanko Gold Mine camp scale, deposit distribution was found to be related to the intersection between major second order D3 NE-SW shear zones, minor third order D4 NNE-SSW brittle faults, and cryptic NW-SE upward propagating basement structures. In addition to these structural criteria, deposits in the Asanko Gold Mine camp were found to be aligned along a NNE-SSW lineament caused by the interaction between the N-S basement structure and the NE-SW trending Asankrangwa Belt shear corridor.
- Full Text:
- Date Issued: 2018
- Authors: Gelber, Benjamin D J
- Date: 2018
- Subjects: Gold ores -- Geology -- Ghana -- Kumasi , Gold mines and mining -- Ghana -- Kumasi , Asankrangwa (Ghana) , Geodynamics -- Ghana -- Kumasi , Prospecting -- Geophysical methods , Orogenic belts -- Ghana -- Kumasi
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/63143 , vital:28367
- Description: The Kumasi Basin in South-west Ghana lies at the centre of the best-endowed Paleoproterozoic gold province in the world. The Kumasi Basin and margins of the adjacent volcanic belts are host to six world class gold camps: (1) 62 Moz Obuasi camp, (2) 22 Moz Prestea-Bogoso camp, (3) 11 Moz Asanko Gold Mine camp, (4) 9 Moz Edikan camp, (5) 7 Moz Bibiani camp, (6) 5 Moz Chirano camp, as well as several additional minor gold camps and many more prospects. Cumulatively these camps account for>116 Moz of endowment and contribute to making south-west Ghana the greatest Paleoproterozoic gold province in the world. Gold deposits in the Kumasi Basin are shear zone hosted and mineralisation ranges from disseminated to massive sulphide refractory deposits, to free milling quartz vein style deposits. Structural relationships and age dating indicate that most deposits are genetically related and were formed during a single episode of gold mineralisation during the D4 NNW-SSE crustal shortening deformation event of the Eburnean Orogeny (2125 – 1980 Ma). The understanding of structural controls on mineralisation is critical for exploration success as it allows exploration to focus on areas where these structural controls exist. This study uses a mineral systems approach to understand the relationship between the geodynamic history and structural controls on gold mineralisation in the Kumasi Basin at various scales, and define targeting criteria which can be applied for the purpose of developing predictive exploration models for making new discoveries in the Asanko Gold Mine camp located in the Asankrangwa Belt. The study used a quantitative analysis to establish residual endowment potential in the Asankrangwa Belt, providing the basis for a business model and resulting exploration strategy. Once established, a Fry autocorrelation analysis was applied to identify trends in deposit and camp spatial distribution to which critical geological processes were ascribed. Observed trends were mapped from multi-scale geophysical data sets and through interpretation of existing geophysical structure models, and structural criteria for targeting orogenic gold deposits at the regional and camp scales were developed. Results show that different structural controls on mineralisation act at the regional and camp scale. At the regional scale the distribution of gold camps was found to be controlled by fundamental N-S and NW-SE basement structures with gold camps forming where they intersect NE-SW first and second order structural corridors. At the Asanko Gold Mine camp scale, deposit distribution was found to be related to the intersection between major second order D3 NE-SW shear zones, minor third order D4 NNE-SSW brittle faults, and cryptic NW-SE upward propagating basement structures. In addition to these structural criteria, deposits in the Asanko Gold Mine camp were found to be aligned along a NNE-SSW lineament caused by the interaction between the N-S basement structure and the NE-SW trending Asankrangwa Belt shear corridor.
- Full Text:
- Date Issued: 2018
A microstructural kinematic study of selected shear zones in the Hartbees River Thrust Belt, northeastern Namaqua Tectonic Province
- Authors: Jackson, Christopher
- Date: 1992
- Subjects: Metamorphic rocks -- South Africa -- Northern Cape , Mylonite -- South Africa -- Northern Cape , Geology -- South Africa -- Northern Cape
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4976 , http://hdl.handle.net/10962/d1005588 , Metamorphic rocks -- South Africa -- Northern Cape , Mylonite -- South Africa -- Northern Cape , Geology -- South Africa -- Northern Cape
- Description: The Hartbees River Thrust Belt (HRTS) is a 40-60 km wide, southwest-vergent zone of complex structure, lithostratigraphy and high-grade metamorphism in the northeastern part of the mid-Proterozoic Namaqua Tectonic Province. The HRTS comprises the boundary zone separating the Bushmanland and Gordonia Subprovinces of the Namaqua Province. A knowledge of the movement histories of major ductile shear zones within the HRTS is fundamental to understanding the tectonic development of the belt, and Namaqua tectogenesis as a whole. In spite of this, no detailed microstructural kinematic studies have been attempted and the movement histories and age relationships of these shear zones have not been described in detail. This thesis represents a detailed microstructural kinematic study of a representative suite of orientated samples of mylonitic rocks, collected from five ductile shear zones within the HRTS. These shear zones include the Neusspruit Lineament, the Kakamas shear zone (KSZ), the Hugosput shear system (HSS), the Rozynenbosch-Ganzenmond shear zone (RGSZ) and the Graafwater shear system (GSS). Accepted modern methods of microstructural kinematic analysis were applied to samples of mylonite from these shear zones, in order to determine the precise orientation of the kinematic vectors, and the sense and relative ages of movements on each of the shear zones. Shear sense criteria, including composite SoC planar fabrics and shear band foliations, asymmetrical porphyroclast systems, mica-fish, oblique grain-shape and subgrain fabrics, asymmetrical microfolds, and the displacement of fractured rigid grains, together with a well-developed mylonite elongation lineation, conclusively indicate that SSW-directed thrusting occurred along the HSS, RGSZ, GSS and possibly along the Neusspruit Lineament, while normal, top-to-NE movements occurred on the Neusspruit Lineament, KSZ and HSS. Rare transposition criteria, and textural and paragenetic contrasts between syn-kinematic fabrics, strongly suggest that the phase of normal, top-to-NE movement seen in the northeastern HRTS shear zones is younger than the more widespread top-to-SW thrusting event. On the basis of mesoscopic structural criteria, SSW-directed thrusting is correlated with the D₂ deformation event in the HRTS. The mylonite zones have been refolded by ENE-SSW trending F₃ crossfolds, whose demonstrated coaxial relationship to the mylonite elongation lineation precluded reorientation of primary kinematic vectors. In the southwestern HRTS, primary thrust vectors have been reoriented by right-lateral, strike-slip shearing adjacent to the Pofadder Lineament during D₄. Simple shear dispersion of mylonite lineations related to normal movement, suggests that they too have been modified by D₄ shearing, and this constrains the timing of extensional movements to post-D₂ and pre- or syn-D₄. Syn-kinematic mineral assemblages, rheological criteria and the annealing states of the mylonites, provide insight into the thermotectonic evolution of the shear zones. A model is proposed in which the movement histories of shear zones within the HRTS are explained in terms of a typical orogenic cycle, involving crustal thickening by thrusting during a compressional orogenic phase, followed by collapse of the thickened crust during an extensional taphrogenic phase.
- Full Text:
- Date Issued: 1992
- Authors: Jackson, Christopher
- Date: 1992
- Subjects: Metamorphic rocks -- South Africa -- Northern Cape , Mylonite -- South Africa -- Northern Cape , Geology -- South Africa -- Northern Cape
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4976 , http://hdl.handle.net/10962/d1005588 , Metamorphic rocks -- South Africa -- Northern Cape , Mylonite -- South Africa -- Northern Cape , Geology -- South Africa -- Northern Cape
- Description: The Hartbees River Thrust Belt (HRTS) is a 40-60 km wide, southwest-vergent zone of complex structure, lithostratigraphy and high-grade metamorphism in the northeastern part of the mid-Proterozoic Namaqua Tectonic Province. The HRTS comprises the boundary zone separating the Bushmanland and Gordonia Subprovinces of the Namaqua Province. A knowledge of the movement histories of major ductile shear zones within the HRTS is fundamental to understanding the tectonic development of the belt, and Namaqua tectogenesis as a whole. In spite of this, no detailed microstructural kinematic studies have been attempted and the movement histories and age relationships of these shear zones have not been described in detail. This thesis represents a detailed microstructural kinematic study of a representative suite of orientated samples of mylonitic rocks, collected from five ductile shear zones within the HRTS. These shear zones include the Neusspruit Lineament, the Kakamas shear zone (KSZ), the Hugosput shear system (HSS), the Rozynenbosch-Ganzenmond shear zone (RGSZ) and the Graafwater shear system (GSS). Accepted modern methods of microstructural kinematic analysis were applied to samples of mylonite from these shear zones, in order to determine the precise orientation of the kinematic vectors, and the sense and relative ages of movements on each of the shear zones. Shear sense criteria, including composite SoC planar fabrics and shear band foliations, asymmetrical porphyroclast systems, mica-fish, oblique grain-shape and subgrain fabrics, asymmetrical microfolds, and the displacement of fractured rigid grains, together with a well-developed mylonite elongation lineation, conclusively indicate that SSW-directed thrusting occurred along the HSS, RGSZ, GSS and possibly along the Neusspruit Lineament, while normal, top-to-NE movements occurred on the Neusspruit Lineament, KSZ and HSS. Rare transposition criteria, and textural and paragenetic contrasts between syn-kinematic fabrics, strongly suggest that the phase of normal, top-to-NE movement seen in the northeastern HRTS shear zones is younger than the more widespread top-to-SW thrusting event. On the basis of mesoscopic structural criteria, SSW-directed thrusting is correlated with the D₂ deformation event in the HRTS. The mylonite zones have been refolded by ENE-SSW trending F₃ crossfolds, whose demonstrated coaxial relationship to the mylonite elongation lineation precluded reorientation of primary kinematic vectors. In the southwestern HRTS, primary thrust vectors have been reoriented by right-lateral, strike-slip shearing adjacent to the Pofadder Lineament during D₄. Simple shear dispersion of mylonite lineations related to normal movement, suggests that they too have been modified by D₄ shearing, and this constrains the timing of extensional movements to post-D₂ and pre- or syn-D₄. Syn-kinematic mineral assemblages, rheological criteria and the annealing states of the mylonites, provide insight into the thermotectonic evolution of the shear zones. A model is proposed in which the movement histories of shear zones within the HRTS are explained in terms of a typical orogenic cycle, involving crustal thickening by thrusting during a compressional orogenic phase, followed by collapse of the thickened crust during an extensional taphrogenic phase.
- Full Text:
- Date Issued: 1992
A geological, petrological and mineralogical study of the UG3 chromitite seam at Modikwa Platinum Mine : significance to exploration and PGE resources
- Authors: Machumele, Nkateko Jones
- Date: 2014
- Subjects: Modikwa Platinum Mine (South Africa) , Chromite -- South Africa -- Limpopo , Geology -- South Africa -- Limpopo , Petrology -- South Africa -- Limpopo , Mineralogy -- South Africa -- Limpopo , Platinum mines and mining -- South Africa -- Limpopo
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5074 , http://hdl.handle.net/10962/d1013553
- Description: The UG3 at Modikwa Platinum Mine occurs as a platiniferous, planar chromitite seam. It is stratigraphically located in the Upper Critical Zone of the Eastern Bushveld Complex. Field work study comprise of underground mapping, sampling, surface mapping, borehole core logging, microprobing and microscopic investigations carried out at the Rhodes University. The UG3 at the Modikwa Platinum Mine is about 22cm thick chromitite seam underlain by a white fine grained anorthosite and overlain by a brown medium grained feldspathic pyroxenite. It is an incomplete cyclic unit consisting of chromite and feldspathic pyroxenite. The UG3 reef at the Modikwa Platinum Mine lease area represents a Platinum Group Metal resource of 300 million tons of ore at an in situ grade of 2.5g/t. Under the current market conditions the UG3 reef remains unprofitable to mine in an underground operation due to the operational cost involved. However, it has been illustrated that the UG3 chromitite seam can increase profit margins in an open pit operation provided it is mined together with the economic UG2 chromitite seam. The extraction of the UG3 as ore in the four Modikwa UG2 open pits would result in a combined operating cash profit of R330 million. The UG3 chromitite seam is platiniferous. The platinum-group minerals (PGM) range in size from less than 10μm to about 70μm. The PGMs are associated with sulphides and are both located in the interstitial silicates and are concentrated in the chromitite seam. The PGMs show a strong preference to contact boundaries of the silicate grains, the chromite grains and the sulphide phases. In some instances, they are enclosed within the chromite grains in association with sulphides. The general sulphide assemblage comprises pentlandite and chalcopyrite whereas, the PGMs assemblage comprises cooperite, ferroplatinum, laurite, FeRhS and PtRhS.
- Full Text:
- Date Issued: 2014
- Authors: Machumele, Nkateko Jones
- Date: 2014
- Subjects: Modikwa Platinum Mine (South Africa) , Chromite -- South Africa -- Limpopo , Geology -- South Africa -- Limpopo , Petrology -- South Africa -- Limpopo , Mineralogy -- South Africa -- Limpopo , Platinum mines and mining -- South Africa -- Limpopo
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5074 , http://hdl.handle.net/10962/d1013553
- Description: The UG3 at Modikwa Platinum Mine occurs as a platiniferous, planar chromitite seam. It is stratigraphically located in the Upper Critical Zone of the Eastern Bushveld Complex. Field work study comprise of underground mapping, sampling, surface mapping, borehole core logging, microprobing and microscopic investigations carried out at the Rhodes University. The UG3 at the Modikwa Platinum Mine is about 22cm thick chromitite seam underlain by a white fine grained anorthosite and overlain by a brown medium grained feldspathic pyroxenite. It is an incomplete cyclic unit consisting of chromite and feldspathic pyroxenite. The UG3 reef at the Modikwa Platinum Mine lease area represents a Platinum Group Metal resource of 300 million tons of ore at an in situ grade of 2.5g/t. Under the current market conditions the UG3 reef remains unprofitable to mine in an underground operation due to the operational cost involved. However, it has been illustrated that the UG3 chromitite seam can increase profit margins in an open pit operation provided it is mined together with the economic UG2 chromitite seam. The extraction of the UG3 as ore in the four Modikwa UG2 open pits would result in a combined operating cash profit of R330 million. The UG3 chromitite seam is platiniferous. The platinum-group minerals (PGM) range in size from less than 10μm to about 70μm. The PGMs are associated with sulphides and are both located in the interstitial silicates and are concentrated in the chromitite seam. The PGMs show a strong preference to contact boundaries of the silicate grains, the chromite grains and the sulphide phases. In some instances, they are enclosed within the chromite grains in association with sulphides. The general sulphide assemblage comprises pentlandite and chalcopyrite whereas, the PGMs assemblage comprises cooperite, ferroplatinum, laurite, FeRhS and PtRhS.
- Full Text:
- Date Issued: 2014
A geological model of shear zone gold deposits in the Pietersburg Greenstone Belt, South Africa
- Authors: Franey, N J
- Date: 1987 , 2013-04-17
- Subjects: Greenstone belts -- South Africa , Gold ores -- Geology -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5032 , http://hdl.handle.net/10962/d1007190 , Greenstone belts -- South Africa , Gold ores -- Geology -- South Africa
- Description: The Pletersburg greenstone belt Is located In South Africa, about 300 km northeast of Johannesburg. It hosts a significant amount of gold mineralization and just over 1000 kg of gold have been produced from Its various reefs and secondary deposits. The greenstone belt is interpreted as an Archean ophiolite complex. It comprlses a volcano-sedimentary succession (the Pletersburg Group) which Is subdivided Into a basal greenstone sequence, interpreted as oceanic crust, and an upper sedimentary cover sequence. A number of major shear zones, which are thought to represent thrusts that developed during the subduction of the greenstone sequence, form an integral part of the stratigraphy . Four stages of deformation (D₁-D₄) and four phases of metamorphism (H₁-H₄) (three of which are correlatable with the peak stages of deformation) are recognized. The primary gold deposits are all shear zones related. but they are subdivided into greenstone, sedimentation and granIte-hosted types. Geographically, they occur In three distinct goldfields: Eerstellng, Roodepoort and Marbastad. The greenstone-hosted · Plenaar-Doreen shear complex Is In the Eersteiing goldfield and hosts eight gold occurrences. Within the complex, Girlie North Reef is the 640m-long "pay" section of the Girlie North shear zone. This reef is characterized, macroscopically, by a Quartz-carbonate-chlorite-sulphlde assemblage and, mlcroscoplcally, by the presence of tourmaline, arsenopyrlte and Au. Geochemical evidence Indicates that mineralizing fluids were H₂O and CO₂-bearing and rich In S, K and Al. The wall rock alteratlon was Isochemlcal but Is manifest as a change In mineralogy from a hornblende + plagioclase assemblage to an actlnollte/tremollte + Quartz + clay assemblage. This Is best developed In the hangIng wall of the reef and is thought to have been caused by hydrogen ion metasomatism. The Arsenopyrite Reef was one of the main sediment-hosted shear zone gold producers In the Harabastad goldfield. This reef Is Interpreted as the basal margin of a shear zone whose top contact Is probably represented by the Quartz Vein Reef. The shear zone consists predomonantly of quartz and carbonate, and the two "pay" reefs are characterized by tourmallne. arsenopyrite and Au. No wall rock alteration was identified In this study, Based on the mineralogy and geochemical signature of the Girlie Nortn Reef and the Arsenopyrite Reef, It Is proposed that both were formed at the $The Pletersburg greenstone belt Is located In South Africa, about 300 km northeast of Johannesburg. It hosts a significant amount of gold mineralization and just over 1000 kg of gold have been produced from Its various reefs and secondary deposits. The greenstone belt is interpreted as an Archean ophiolite complex. It comprlses a volcano-sedimentary succession (the Pletersburg Group) which Is subdivided Into a basal greenstone sequence, interpreted as oceanic crust, and an upper sedimentary cover sequence. A number of major shear zones, which are thought to represent thrusts that developed during the subduction of the greenstone sequence, form an integral part of the stratigraphy . Four stages of deformation (D₁-D₄) and four phases of metamorphism (H₁-H₄) (three of which are correlatable with the peak stages of deformation) are recognized. The primary gold deposits are all shear zones related. but they are subdivided into greenstone, sedimentation and granIte-hosted types. Geographically, they occur In three distinct goldfields: Eerstellng, Roodepoort and Marbastad. The greenstone-hosted · Plenaar-Doreen shear complex Is In the Eersteiing goldfield and hosts eight gold occurrences. Within the complex, Girlie North Reef is the 640m-long "pay" section of the Girlie North shear zone. This reef is characterized, macroscopically, by a Quartz-carbonate-chlorite-sulphlde assemblage and, mlcroscoplcally, by the presence of tourmaline, arsenopyrlte and Au. Geochemical evidence Indicates that mineralizing fluids were H₂O and CO₂-bearing and rich In S, K and Al. The wall rock alteratlon was Isochemlcal but Is manifest as a change In mineralogy from a hornblende + plagioclase assemblage to an actlnollte/tremollte + Quartz + clay assemblage. This Is best developed In the hangIng wall of the reef and is thought to have been caused by hydrogen ion metasomatism. The Arsenopyrite Reef was one of the main sediment-hosted shear zone gold producers In the Harabastad goldfield. This reef Is Interpreted as the basal margin of a shear zone whose top contact Is probably represented by the Quartz Vein Reef. The shear zone consists predomonantly of quartz and carbonate, and the two "pay" reefs are characterized by tourmallne. arsenopyrite and Au. No wall rock alteration was identified In this study, Based on the mineralogy and geochemical signature of the Girlie Nortn Reef and the Arsenopyrite Reef, It Is proposed that both were formed at the same time. Textural evidence Indicates that tourmaline, arsenopyrite and Au were all very late In the paragenesis of minerallzatlon. The presence of tourmaline also Indicates a probable granite association. It Is proposed that the maln gold mineralizing event was synchronous with the Intrusion of granitoids (and therefore also with (D₁-D₄) and (H₁-H₄) and that most of the Au was derived from felsic magma. Gold was partitioned Into a magmatic hydrothermal fluid and then transported into the greenstone belt as a chlorIde complex. These magmatiC fluids were channelled up shear zones whIch had already been mineralized with a quartz-carbonate-chlorlte - sulphide assemblage by previous metamorphic fluidS. generated during the dynamic (D₂-related) H₂-phase of metamorphism. The Au was then deposIted as the result of a change In a fluid variable, such as temperature, pH, f0₂, or the activity of Cl (some Au may have been transported In a sulphur complex and so the activity of reduced 5 could also have been Important).
- Full Text:
- Date Issued: 1987
- Authors: Franey, N J
- Date: 1987 , 2013-04-17
- Subjects: Greenstone belts -- South Africa , Gold ores -- Geology -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5032 , http://hdl.handle.net/10962/d1007190 , Greenstone belts -- South Africa , Gold ores -- Geology -- South Africa
- Description: The Pletersburg greenstone belt Is located In South Africa, about 300 km northeast of Johannesburg. It hosts a significant amount of gold mineralization and just over 1000 kg of gold have been produced from Its various reefs and secondary deposits. The greenstone belt is interpreted as an Archean ophiolite complex. It comprlses a volcano-sedimentary succession (the Pletersburg Group) which Is subdivided Into a basal greenstone sequence, interpreted as oceanic crust, and an upper sedimentary cover sequence. A number of major shear zones, which are thought to represent thrusts that developed during the subduction of the greenstone sequence, form an integral part of the stratigraphy . Four stages of deformation (D₁-D₄) and four phases of metamorphism (H₁-H₄) (three of which are correlatable with the peak stages of deformation) are recognized. The primary gold deposits are all shear zones related. but they are subdivided into greenstone, sedimentation and granIte-hosted types. Geographically, they occur In three distinct goldfields: Eerstellng, Roodepoort and Marbastad. The greenstone-hosted · Plenaar-Doreen shear complex Is In the Eersteiing goldfield and hosts eight gold occurrences. Within the complex, Girlie North Reef is the 640m-long "pay" section of the Girlie North shear zone. This reef is characterized, macroscopically, by a Quartz-carbonate-chlorite-sulphlde assemblage and, mlcroscoplcally, by the presence of tourmaline, arsenopyrlte and Au. Geochemical evidence Indicates that mineralizing fluids were H₂O and CO₂-bearing and rich In S, K and Al. The wall rock alteratlon was Isochemlcal but Is manifest as a change In mineralogy from a hornblende + plagioclase assemblage to an actlnollte/tremollte + Quartz + clay assemblage. This Is best developed In the hangIng wall of the reef and is thought to have been caused by hydrogen ion metasomatism. The Arsenopyrite Reef was one of the main sediment-hosted shear zone gold producers In the Harabastad goldfield. This reef Is Interpreted as the basal margin of a shear zone whose top contact Is probably represented by the Quartz Vein Reef. The shear zone consists predomonantly of quartz and carbonate, and the two "pay" reefs are characterized by tourmallne. arsenopyrite and Au. No wall rock alteration was identified In this study, Based on the mineralogy and geochemical signature of the Girlie Nortn Reef and the Arsenopyrite Reef, It Is proposed that both were formed at the $The Pletersburg greenstone belt Is located In South Africa, about 300 km northeast of Johannesburg. It hosts a significant amount of gold mineralization and just over 1000 kg of gold have been produced from Its various reefs and secondary deposits. The greenstone belt is interpreted as an Archean ophiolite complex. It comprlses a volcano-sedimentary succession (the Pletersburg Group) which Is subdivided Into a basal greenstone sequence, interpreted as oceanic crust, and an upper sedimentary cover sequence. A number of major shear zones, which are thought to represent thrusts that developed during the subduction of the greenstone sequence, form an integral part of the stratigraphy . Four stages of deformation (D₁-D₄) and four phases of metamorphism (H₁-H₄) (three of which are correlatable with the peak stages of deformation) are recognized. The primary gold deposits are all shear zones related. but they are subdivided into greenstone, sedimentation and granIte-hosted types. Geographically, they occur In three distinct goldfields: Eerstellng, Roodepoort and Marbastad. The greenstone-hosted · Plenaar-Doreen shear complex Is In the Eersteiing goldfield and hosts eight gold occurrences. Within the complex, Girlie North Reef is the 640m-long "pay" section of the Girlie North shear zone. This reef is characterized, macroscopically, by a Quartz-carbonate-chlorite-sulphlde assemblage and, mlcroscoplcally, by the presence of tourmaline, arsenopyrlte and Au. Geochemical evidence Indicates that mineralizing fluids were H₂O and CO₂-bearing and rich In S, K and Al. The wall rock alteratlon was Isochemlcal but Is manifest as a change In mineralogy from a hornblende + plagioclase assemblage to an actlnollte/tremollte + Quartz + clay assemblage. This Is best developed In the hangIng wall of the reef and is thought to have been caused by hydrogen ion metasomatism. The Arsenopyrite Reef was one of the main sediment-hosted shear zone gold producers In the Harabastad goldfield. This reef Is Interpreted as the basal margin of a shear zone whose top contact Is probably represented by the Quartz Vein Reef. The shear zone consists predomonantly of quartz and carbonate, and the two "pay" reefs are characterized by tourmallne. arsenopyrite and Au. No wall rock alteration was identified In this study, Based on the mineralogy and geochemical signature of the Girlie Nortn Reef and the Arsenopyrite Reef, It Is proposed that both were formed at the same time. Textural evidence Indicates that tourmaline, arsenopyrite and Au were all very late In the paragenesis of minerallzatlon. The presence of tourmaline also Indicates a probable granite association. It Is proposed that the maln gold mineralizing event was synchronous with the Intrusion of granitoids (and therefore also with (D₁-D₄) and (H₁-H₄) and that most of the Au was derived from felsic magma. Gold was partitioned Into a magmatic hydrothermal fluid and then transported into the greenstone belt as a chlorIde complex. These magmatiC fluids were channelled up shear zones whIch had already been mineralized with a quartz-carbonate-chlorlte - sulphide assemblage by previous metamorphic fluidS. generated during the dynamic (D₂-related) H₂-phase of metamorphism. The Au was then deposIted as the result of a change In a fluid variable, such as temperature, pH, f0₂, or the activity of Cl (some Au may have been transported In a sulphur complex and so the activity of reduced 5 could also have been Important).
- Full Text:
- Date Issued: 1987
A geological evaluation of marine diamond placer deposits on the central Namibian inner shelf : a case study of the Hottentot Bay area
- Authors: Rau, Grant
- Date: 2004 , 2013-06-03
- Subjects: Diamond mines and mining -- Namibia , Ocean mining -- Namibia , Marine mineral resources
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5038 , http://hdl.handle.net/10962/d1007554 , Diamond mines and mining -- Namibia , Ocean mining -- Namibia , Marine mineral resources
- Description: This study focusses on the marine diamond placers within Exclusive Prospecting Licence 1950 and Mining Licence 103a, located northwest of the north-facing Hottentot Bay which is 60 km north of Lüderitz, along the central Namibian coastline. The thesis follows the natural geological evolution of the marine placer deposit from primary source, through alluvial and/or glacial transportation, concentration along the coastline by wave, aeolian and alluvial/sheet-wash processes and finally marine diamond placer preservation. All of these processes are reviewed as they are important in understanding of the evolution marine placer deposits. The poly-cyclic role of coastal aeolian, alluvial, and marine processes, in marine placer enrichment is shown to be particularly important in considered target identification and prioritisation. A detailed bathymetric, sonographic and seismic interpretation, is an integral part of diamond placer exploration, and was used to examine and describe surficial and sub-bottom characteristics within the study area. Marine placers are formed along palaeo-strandlines during periods of marine transgression and regression and are therefore fundamental in marine placer exploration. A detailed bathymetry map, compiled for this study, of the area between Lüderitz Bay and Clara Hill, provides the foundation for a detailed terrace level investigation. Regionally, twelve well-developed stillstand levels are identified, nine of which fall into the study area. These interpretations are compared with global eustatic as well as terrace and resource/reserve levels in the Lüderitz area and are found to correlate well. Sediment dynamic studies involve the use of accredited application software for wave refraction modelling, to determine the wave angle and orbital wave velocity at the seabed. Bedload velocities, required to move diamonds of specific sizes, can be empirically determined and therefore areas of diamond entrainment and deposition can be modelled and target features delineated and prioritised. These detailed interpretations provide a sound platform for evaluating diamond placer process models in the study area. By integrating both previously published and newly formulated ideas, a revised, holistic model for the formation of marine diamond placer deposits in central Namibian is postulated. The proposed model is tested by comparing it to the lateral distribution of presently defined resource/reserve areas in the Lüderitz area and shows a close correlation with most of these enriched deposits. Based on this model, a matrix for the delineation and prioritisation of marine placer deposits is developed and the best target features within the study area are identified. , KMBT_363 , Adobe Acrobat 9.54 Paper Capture Plug-in
- Full Text:
- Date Issued: 2004
- Authors: Rau, Grant
- Date: 2004 , 2013-06-03
- Subjects: Diamond mines and mining -- Namibia , Ocean mining -- Namibia , Marine mineral resources
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5038 , http://hdl.handle.net/10962/d1007554 , Diamond mines and mining -- Namibia , Ocean mining -- Namibia , Marine mineral resources
- Description: This study focusses on the marine diamond placers within Exclusive Prospecting Licence 1950 and Mining Licence 103a, located northwest of the north-facing Hottentot Bay which is 60 km north of Lüderitz, along the central Namibian coastline. The thesis follows the natural geological evolution of the marine placer deposit from primary source, through alluvial and/or glacial transportation, concentration along the coastline by wave, aeolian and alluvial/sheet-wash processes and finally marine diamond placer preservation. All of these processes are reviewed as they are important in understanding of the evolution marine placer deposits. The poly-cyclic role of coastal aeolian, alluvial, and marine processes, in marine placer enrichment is shown to be particularly important in considered target identification and prioritisation. A detailed bathymetric, sonographic and seismic interpretation, is an integral part of diamond placer exploration, and was used to examine and describe surficial and sub-bottom characteristics within the study area. Marine placers are formed along palaeo-strandlines during periods of marine transgression and regression and are therefore fundamental in marine placer exploration. A detailed bathymetry map, compiled for this study, of the area between Lüderitz Bay and Clara Hill, provides the foundation for a detailed terrace level investigation. Regionally, twelve well-developed stillstand levels are identified, nine of which fall into the study area. These interpretations are compared with global eustatic as well as terrace and resource/reserve levels in the Lüderitz area and are found to correlate well. Sediment dynamic studies involve the use of accredited application software for wave refraction modelling, to determine the wave angle and orbital wave velocity at the seabed. Bedload velocities, required to move diamonds of specific sizes, can be empirically determined and therefore areas of diamond entrainment and deposition can be modelled and target features delineated and prioritised. These detailed interpretations provide a sound platform for evaluating diamond placer process models in the study area. By integrating both previously published and newly formulated ideas, a revised, holistic model for the formation of marine diamond placer deposits in central Namibian is postulated. The proposed model is tested by comparing it to the lateral distribution of presently defined resource/reserve areas in the Lüderitz area and shows a close correlation with most of these enriched deposits. Based on this model, a matrix for the delineation and prioritisation of marine placer deposits is developed and the best target features within the study area are identified. , KMBT_363 , Adobe Acrobat 9.54 Paper Capture Plug-in
- Full Text:
- Date Issued: 2004
A geochemical and morphological investigation of placer gold grains from the southern Seward Peninsula, Alaska : implications for source and transport mechanisms
- Gauntlett, Ernest John Herbert
- Authors: Gauntlett, Ernest John Herbert
- Date: 2015
- Subjects: Placer deposits -- Alaska -- Seward Peninsula , Gold alloys , Gold mines and mining -- Alaska -- Seward Peninsula , Geochemical surveys -- Alaska -- Seward Peninsula , Trace elements -- Alaska -- Seward Peninsula , Drift -- Alaska -- Seward Peninsula , Gold -- Standards of fineness
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5085 , http://hdl.handle.net/10962/d1018202
- Description: [Partial abstract]: This study presents the first detailed geochemical and morphological characterisation of gold grains from the southern Seward Peninsula, Alaska, a region with significant historical and on-going placer gold mining. Quantitative Au, Ag, Hg, and Cu data are presented for gold grains from eleven sites. Additionally, quantitative Te, W, As, and Sb trace element data are presented for gold grains from ten of the eleven sites. Although it is acknowledged that quantitative trace element analysis of gold grains is a relatively new endeavour, the limited trace element data obtained in this study suggest that trace element analysis could be useful for characterising gold sources on the southern Seward Peninsula. Major and minor element geochemical profiling is sufficient at differentiating between sites from regional provenance systems but insufficient at differentiating between sites within a single system. Differentiating among sites within a single system will likely require microchemical analysis of mineral inclusions and analysis of trace element signatures.
- Full Text:
- Date Issued: 2015
- Authors: Gauntlett, Ernest John Herbert
- Date: 2015
- Subjects: Placer deposits -- Alaska -- Seward Peninsula , Gold alloys , Gold mines and mining -- Alaska -- Seward Peninsula , Geochemical surveys -- Alaska -- Seward Peninsula , Trace elements -- Alaska -- Seward Peninsula , Drift -- Alaska -- Seward Peninsula , Gold -- Standards of fineness
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5085 , http://hdl.handle.net/10962/d1018202
- Description: [Partial abstract]: This study presents the first detailed geochemical and morphological characterisation of gold grains from the southern Seward Peninsula, Alaska, a region with significant historical and on-going placer gold mining. Quantitative Au, Ag, Hg, and Cu data are presented for gold grains from eleven sites. Additionally, quantitative Te, W, As, and Sb trace element data are presented for gold grains from ten of the eleven sites. Although it is acknowledged that quantitative trace element analysis of gold grains is a relatively new endeavour, the limited trace element data obtained in this study suggest that trace element analysis could be useful for characterising gold sources on the southern Seward Peninsula. Major and minor element geochemical profiling is sufficient at differentiating between sites from regional provenance systems but insufficient at differentiating between sites within a single system. Differentiating among sites within a single system will likely require microchemical analysis of mineral inclusions and analysis of trace element signatures.
- Full Text:
- Date Issued: 2015
A contribution to the petrology of kimberlites
- Authors: Kruger, Floris Johan
- Date: 1978 , 2013-10-17
- Subjects: Kimberlite -- Africa, Southern , Petrology , Igneous rocks -- Inclusions
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5024 , http://hdl.handle.net/10962/d1006886 , Kimberlite -- Africa, Southern , Petrology , Igneous rocks -- Inclusions
- Description: The petrogenetic relationships of the different varieties of kimberlite in the De Beers Mine and Letseng-Ia-terai composite diatremes have been investigated using petrographic and chemical methods. Kimberlites in the Letseng-Ia-terai diatreme were found to be strongly contaminated by crustal material, mainly basalt. A method to correct for the effects of the contamination has been developed and applied to these kimberlites. Using the corrected data, the four kimberlite types in each group appear to be related to each other by crystal/liquid fractionation models. However the two groups cannot be related to each other. The De Beer Mine has two varieties of kimberlite, a monticellite apatite and calcite rich variety which intruded first, and a phlogopite rich type forming a discrete cylindrical body within the earlier kimberlite. These two kimberlites do not appear to be related by any of the fractionation models discussed. An examination of the data from this work and published sources, suggests that kimberlites are derived from below the low velocity zone by small degrees of partial melting involving garnet lherzolite with subordinate phlogopite and carbonate. Diamonds are probably incorporated as xenocrysts in the magma. Upward movement and emplacement of kimberlite appears to have been very rapid. The diatremes were probably eroded and shaped by gas, derived from the kimberlite magma, escaping to surface along weak zones in the earth's crust. Xenoliths of crustal material incorporated in the kimberlite on intrusion have also been studied and various features due to alteration by the magma are described, including the formation of natrolite and cebollite. The latter is a rare mineral that has not been described from kimberlite before. , KMBT_363 , Adobe Acrobat 9.54 Paper Capture Plug-in
- Full Text:
- Date Issued: 1978
- Authors: Kruger, Floris Johan
- Date: 1978 , 2013-10-17
- Subjects: Kimberlite -- Africa, Southern , Petrology , Igneous rocks -- Inclusions
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5024 , http://hdl.handle.net/10962/d1006886 , Kimberlite -- Africa, Southern , Petrology , Igneous rocks -- Inclusions
- Description: The petrogenetic relationships of the different varieties of kimberlite in the De Beers Mine and Letseng-Ia-terai composite diatremes have been investigated using petrographic and chemical methods. Kimberlites in the Letseng-Ia-terai diatreme were found to be strongly contaminated by crustal material, mainly basalt. A method to correct for the effects of the contamination has been developed and applied to these kimberlites. Using the corrected data, the four kimberlite types in each group appear to be related to each other by crystal/liquid fractionation models. However the two groups cannot be related to each other. The De Beer Mine has two varieties of kimberlite, a monticellite apatite and calcite rich variety which intruded first, and a phlogopite rich type forming a discrete cylindrical body within the earlier kimberlite. These two kimberlites do not appear to be related by any of the fractionation models discussed. An examination of the data from this work and published sources, suggests that kimberlites are derived from below the low velocity zone by small degrees of partial melting involving garnet lherzolite with subordinate phlogopite and carbonate. Diamonds are probably incorporated as xenocrysts in the magma. Upward movement and emplacement of kimberlite appears to have been very rapid. The diatremes were probably eroded and shaped by gas, derived from the kimberlite magma, escaping to surface along weak zones in the earth's crust. Xenoliths of crustal material incorporated in the kimberlite on intrusion have also been studied and various features due to alteration by the magma are described, including the formation of natrolite and cebollite. The latter is a rare mineral that has not been described from kimberlite before. , KMBT_363 , Adobe Acrobat 9.54 Paper Capture Plug-in
- Full Text:
- Date Issued: 1978
A comparative mineralogical and geochemical study of manganese deposits in the Postmasburg Manganese Field, South Africa
- Authors: Thokoa, Mamello
- Date: 2020
- Subjects: Manganese ores -- South Africa -- Postmasburg , Geology -- South Africa -- Postmasburg
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/167609 , vital:41496
- Description: The Postmasburg Manganese Field (PMF), located in the Northern Cape Province of South Africa, is host to some of the largest deposits of iron and manganese metal in the world. These deposits are restricted to a geographical area known as the Maremane Dome, an anticlinal structure defined by folded dolostones of the Campbellrand Subgroup and overlying ironformations of the Asbestos Hills Subgroup of the Neoarchaean-Palaeproterozoic Transvaal Supergroup. Manganese ores associated with the Maremane Dome have been divided into two major classes in the literature: the Wolhaarkop breccia-hosted massive ores of the Eastern Belt, as well as the shale-associated ores of the Western Belt. The Eastern Belt ores have been classed as siliceous in nature, while the Western Belt deposits are reported to be typically ferruginous. These divisions were made based on their varying bulk chemical and mineralogical compositions in conjunction with their different stratigraphic sub-settings. Presently, both deposit types are explained as variants of supergene mineralisation that would have formed through a combination of intense ancient lateritic weathering in the presence of oxygen, extreme residual enrichments in Mn (and Fe), and accumulations in karstic depressions at the expense of underlying manganiferous dolostones. This study revisits these deposits and their origins by sampling representative end-member examples of both Eastern Belt and Western Belt manganese ores in both drillcore (localities Khumani, McCarthy and Leeuwfontein), and outcrop sections (locality Bishop). In an attempt to provide new insights into the processes responsible for the genesis of these deposits, the possibility of hydrothermal influences and associated metasomatic replacement processes is explored in this thesis. This was achieved using standard petrographic and mineralogical techniques (transmitted and reflected light microscopy, XRD , SEM-EDS and EMPA), coupled with bulk-rock geochemical analysis of the same samples using a combination of XRF and LAICP- MS analyses. Combination of field observations, petrographic and mineralogical results, and geochemical data allowed for the re-assessment of the different ore types encountered in the field. Comparative considerations made between the bulk geochemistry of the different end-member ore types revealed no clear-cut compositional distinctions and therefore do not support existing classifications between siliceous (Eastern Belt) and ferruginous (Western Belt) ores. This is supported by trace and REE element data as well, when normalised against average shale. The geochemistry reflects the bulk mineralogy of the ores which is broadly comparable, whereby braunite and hematite appear to be dominant co-existing minerals in both Eastern Belt (Khumani) and Western Belt (Bishop) ore. In the case of the McCarthy locality, manganese ore is cryptomelane-rich and appears to have involved recent supergene overprint over Eastern Belt type ore, whereas the Leeuwfontein ores are far more ferruginous than at any other locality studied and therefore represent a more complex, hybrid type of oxide-rich Mn mineralisation (mainly bixbyitic) within massive hematite iron ore. In terms of gangue mineralogy, the ores share some close similarities through the omnipresence of barite, and the abundance of alkalirich silicate minerals. Eastern Belt ores contain abundant albite and serandite whereas the main alkali-rich phase in Western Belt ores is the mineral ephesite. In both cases, Na contents are therefore high at several wt% levels registered in selected samples. The afore-mentioned alkali enrichments have been variously reported for both these deposit types. The occurrence of high alkalis cannot be explained through classic residual or aqueous supergene systems of ore formation, as proposed in prevailing genetic models in the literature. Together with the detection of halogens such as F and Br through SEM-EDS analyses of ore from both belts, the alkali enrichments suggest possible hydrothermal processes of ore formation involving circulation of metalliferous sodic brines. Selected textural evidence from samples from both ore belts lends support to fluid-related models and allow the proposal for a common hydrothermal-replacement model to have been responsible for ore formation across the broader Maremane Dome region.
- Full Text:
- Date Issued: 2020
- Authors: Thokoa, Mamello
- Date: 2020
- Subjects: Manganese ores -- South Africa -- Postmasburg , Geology -- South Africa -- Postmasburg
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/167609 , vital:41496
- Description: The Postmasburg Manganese Field (PMF), located in the Northern Cape Province of South Africa, is host to some of the largest deposits of iron and manganese metal in the world. These deposits are restricted to a geographical area known as the Maremane Dome, an anticlinal structure defined by folded dolostones of the Campbellrand Subgroup and overlying ironformations of the Asbestos Hills Subgroup of the Neoarchaean-Palaeproterozoic Transvaal Supergroup. Manganese ores associated with the Maremane Dome have been divided into two major classes in the literature: the Wolhaarkop breccia-hosted massive ores of the Eastern Belt, as well as the shale-associated ores of the Western Belt. The Eastern Belt ores have been classed as siliceous in nature, while the Western Belt deposits are reported to be typically ferruginous. These divisions were made based on their varying bulk chemical and mineralogical compositions in conjunction with their different stratigraphic sub-settings. Presently, both deposit types are explained as variants of supergene mineralisation that would have formed through a combination of intense ancient lateritic weathering in the presence of oxygen, extreme residual enrichments in Mn (and Fe), and accumulations in karstic depressions at the expense of underlying manganiferous dolostones. This study revisits these deposits and their origins by sampling representative end-member examples of both Eastern Belt and Western Belt manganese ores in both drillcore (localities Khumani, McCarthy and Leeuwfontein), and outcrop sections (locality Bishop). In an attempt to provide new insights into the processes responsible for the genesis of these deposits, the possibility of hydrothermal influences and associated metasomatic replacement processes is explored in this thesis. This was achieved using standard petrographic and mineralogical techniques (transmitted and reflected light microscopy, XRD , SEM-EDS and EMPA), coupled with bulk-rock geochemical analysis of the same samples using a combination of XRF and LAICP- MS analyses. Combination of field observations, petrographic and mineralogical results, and geochemical data allowed for the re-assessment of the different ore types encountered in the field. Comparative considerations made between the bulk geochemistry of the different end-member ore types revealed no clear-cut compositional distinctions and therefore do not support existing classifications between siliceous (Eastern Belt) and ferruginous (Western Belt) ores. This is supported by trace and REE element data as well, when normalised against average shale. The geochemistry reflects the bulk mineralogy of the ores which is broadly comparable, whereby braunite and hematite appear to be dominant co-existing minerals in both Eastern Belt (Khumani) and Western Belt (Bishop) ore. In the case of the McCarthy locality, manganese ore is cryptomelane-rich and appears to have involved recent supergene overprint over Eastern Belt type ore, whereas the Leeuwfontein ores are far more ferruginous than at any other locality studied and therefore represent a more complex, hybrid type of oxide-rich Mn mineralisation (mainly bixbyitic) within massive hematite iron ore. In terms of gangue mineralogy, the ores share some close similarities through the omnipresence of barite, and the abundance of alkalirich silicate minerals. Eastern Belt ores contain abundant albite and serandite whereas the main alkali-rich phase in Western Belt ores is the mineral ephesite. In both cases, Na contents are therefore high at several wt% levels registered in selected samples. The afore-mentioned alkali enrichments have been variously reported for both these deposit types. The occurrence of high alkalis cannot be explained through classic residual or aqueous supergene systems of ore formation, as proposed in prevailing genetic models in the literature. Together with the detection of halogens such as F and Br through SEM-EDS analyses of ore from both belts, the alkali enrichments suggest possible hydrothermal processes of ore formation involving circulation of metalliferous sodic brines. Selected textural evidence from samples from both ore belts lends support to fluid-related models and allow the proposal for a common hydrothermal-replacement model to have been responsible for ore formation across the broader Maremane Dome region.
- Full Text:
- Date Issued: 2020
A collated digital, geological map database for the central Namaqua Province using geographical information system technology
- Authors: Holland, Henry
- Date: 1997
- Subjects: Geographic information systems , Namaqua Province (South Africa) -- Maps Databases , Geology Maps , Cartography
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4936 , http://hdl.handle.net/10962/d1005548 , Geographic information systems , Namaqua Province (South Africa) -- Maps Databases , Geology Maps , Cartography
- Description: The genlogy of the Namaqua Province is notoriously difficult to map and interpret due to polymetamorphic and multiple deformation events and limlted outcrop. Current maps of the Province reflect diverse interpretations of stratigraphy as a consequence of these difficulties. A Geographic Information System is essentially a digital database and a set of functions and procedures to capture, analyse and manipulate spatially related data. A GIS is therefore ideally suited to the study and analysis of maps. A digital map database was established, using modem GIS technology, to facilitate the collation of existing maps of an area in the Central Namaqua Province (CNP). This database is based on a lithological classification system similar to that used by Harris (1992), rather than on an interpretive stratigraphic model. In order to establish the database, existing geological maps were scanned into a GIS, and lines of outcrop and lithological contacts were digitised using a manual line following process, which is one of the functions native to a GIS. Attribute data were then attached to the resultant polygons. The attribute database consists of lithological, textural and mineralogical data, as well as stratigraphical classification data according to the South African Committee for Stratigraphy (SACS), correlative names assigned to units by the Precambrian Research Unit, the Geological Survey of South Africa, the Bushmanland Research group and the University of the Orange Free State. Other attribute data included in the database, are tectonic and absolute age information, and the terrane classification for the area. This database reflects the main objective of the project and also serves as a basis for further expansion of a geological GIS for the CNP. Cartographic and database capabilities of the GIS were employed to produce a collated lithological map of the CNP. A TNTmipsTM Spatial Manipulation Language routine was written to produce a database containing two fields linked to each polygon, one for lithology and one for a correlation probability factor. Correlation factors are calculated in this routine from three variables, namely the prominence a worker attached to a specific lithology within a unit or outcrop, the agreement amongst the various workers on the actual lithology present within an outcrop, and the correspondence between the source of the spatial element (mapped outcrop) and the source of the attribute data attached to it. Outcrops were displayed on the map according to the lithology with the highest correlation factor, providing a unique view of the spatial relationships and distribution patterns of lithological units in the CNP. A second map was produced indicating the correlation factors for lithologies within the CNP. Thematic maps are produced in a GIS by selecting spatial elements according to a set of criteria, usually based on the attribute database, and then displaying the elements as maps. Maps created by this process are known as customised maps, since users of the GIS can customise the selection and display of elements according to their needs. For instance, all outcrops of rock units containing particular lithologies of a given age occurring in a specific terrane can be displayed - either on screen or printed out as a map. The database also makes it possible to plot maps according to different stratigraphic classification systems. Areas where various workers disagree on the stratigraphic classification of units can be isolated, and displayed as separate maps in order to aid in the collation process. The database can assist SACS in identifying areas in the CNP where stratigraphic classification is still lacking or agreements on stratigraphic nomenclature have not yet been attained. More than one database can be attached to the spatial elements in a GIS, and the Namaqua-GIS can therefore be expanded to include geochemical, geophysical, economic, structural and geographical data. Other data on the area, such as more detailed maps, photographs and satellite images can be attached to the lithological map database in the correct spatial relationship. Another advantage of a GIS is the facility to continually update the database(s) as more information becomes available and/or as interpretation of the area is refined.
- Full Text:
- Date Issued: 1997
- Authors: Holland, Henry
- Date: 1997
- Subjects: Geographic information systems , Namaqua Province (South Africa) -- Maps Databases , Geology Maps , Cartography
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4936 , http://hdl.handle.net/10962/d1005548 , Geographic information systems , Namaqua Province (South Africa) -- Maps Databases , Geology Maps , Cartography
- Description: The genlogy of the Namaqua Province is notoriously difficult to map and interpret due to polymetamorphic and multiple deformation events and limlted outcrop. Current maps of the Province reflect diverse interpretations of stratigraphy as a consequence of these difficulties. A Geographic Information System is essentially a digital database and a set of functions and procedures to capture, analyse and manipulate spatially related data. A GIS is therefore ideally suited to the study and analysis of maps. A digital map database was established, using modem GIS technology, to facilitate the collation of existing maps of an area in the Central Namaqua Province (CNP). This database is based on a lithological classification system similar to that used by Harris (1992), rather than on an interpretive stratigraphic model. In order to establish the database, existing geological maps were scanned into a GIS, and lines of outcrop and lithological contacts were digitised using a manual line following process, which is one of the functions native to a GIS. Attribute data were then attached to the resultant polygons. The attribute database consists of lithological, textural and mineralogical data, as well as stratigraphical classification data according to the South African Committee for Stratigraphy (SACS), correlative names assigned to units by the Precambrian Research Unit, the Geological Survey of South Africa, the Bushmanland Research group and the University of the Orange Free State. Other attribute data included in the database, are tectonic and absolute age information, and the terrane classification for the area. This database reflects the main objective of the project and also serves as a basis for further expansion of a geological GIS for the CNP. Cartographic and database capabilities of the GIS were employed to produce a collated lithological map of the CNP. A TNTmipsTM Spatial Manipulation Language routine was written to produce a database containing two fields linked to each polygon, one for lithology and one for a correlation probability factor. Correlation factors are calculated in this routine from three variables, namely the prominence a worker attached to a specific lithology within a unit or outcrop, the agreement amongst the various workers on the actual lithology present within an outcrop, and the correspondence between the source of the spatial element (mapped outcrop) and the source of the attribute data attached to it. Outcrops were displayed on the map according to the lithology with the highest correlation factor, providing a unique view of the spatial relationships and distribution patterns of lithological units in the CNP. A second map was produced indicating the correlation factors for lithologies within the CNP. Thematic maps are produced in a GIS by selecting spatial elements according to a set of criteria, usually based on the attribute database, and then displaying the elements as maps. Maps created by this process are known as customised maps, since users of the GIS can customise the selection and display of elements according to their needs. For instance, all outcrops of rock units containing particular lithologies of a given age occurring in a specific terrane can be displayed - either on screen or printed out as a map. The database also makes it possible to plot maps according to different stratigraphic classification systems. Areas where various workers disagree on the stratigraphic classification of units can be isolated, and displayed as separate maps in order to aid in the collation process. The database can assist SACS in identifying areas in the CNP where stratigraphic classification is still lacking or agreements on stratigraphic nomenclature have not yet been attained. More than one database can be attached to the spatial elements in a GIS, and the Namaqua-GIS can therefore be expanded to include geochemical, geophysical, economic, structural and geographical data. Other data on the area, such as more detailed maps, photographs and satellite images can be attached to the lithological map database in the correct spatial relationship. Another advantage of a GIS is the facility to continually update the database(s) as more information becomes available and/or as interpretation of the area is refined.
- Full Text:
- Date Issued: 1997
A bulk and fraction-specific geochemical study of the origin of diverse high-grade hematitic iron ores from the Transvaal Supergroup, Northern Cape Province, South Africa
- Authors: Moloto, William
- Date: 2017
- Subjects: Iron ore -- South Africa -- Transvaal Supergroup , Hematite -- South Africa -- Transvaal Supergroup , Transvaal Supergroup (South Africa)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/50546 , vital:25998
- Description: The Paleoproterozoic Transvaal Supergroup in the Northern Cape Province of South Africa is host to high-grade, Banded Iron Formation-hosted hematite iron-ore deposits and is the country’s most important source of iron to date. Previous studies suggest the origin of these iron ores to be ancient supergene, and that the ore forming process would have therefore pre-dated deposition of the basal Mapedi shales of the Olifansthoek Supergroup that unconformably overlies the Transvaal strata. The nature of the protolith to the ores has been suggested to be largely BIF of the Asbestos Hills Subgroup, and mainly the Kuruman BIF. The work presented in this thesis seeks to provide insights into the diversity of processes that are likely to have been involved during the genesis of these high-grade iron ores, in the context of constraining the pre-ore lithologies and the relative role of supergene-style, largely residual enrichment processes versus any possible metasomatic hydrothermal effects. This study had as primary focus the application of combined bulk and fraction-specific geochemical applications on representative iron-ore samples from four different localities in the Northern Cape Province, namely King/Khumani, Beeshoek, Heuninkranz and Hotazel. The collected samples show a variety of textures and also capture different pre-unconformity stratigraphic sections of BIF. The key objective was to assess whether the fraction-specific analytical results could provide any firm constraints for the origin of the ferrous and non-ferrous matrix fractions of the ores, namely whether they represent any combinations of protolith residue, allochtonously-introduced detritus or hydrothermally-derived material, and whether the results are comparable and consistent across all samples studied. In particular, constraints were sought as to whether the ore protolith was exclusively BIF or may potentially have contained at least a fraction of other lithologic types, such as shale; and whether there is sufficient evidence to support solely a supergene model for the ores or the data suggest other more epigenetic models of ore formation involving the action of hydrothermal fluids Bulk-rock geochemical analyses reveal the overwhelming dominance of Fe-oxide (as hematite) in all samples, at concentrations as high as 99 wt.% Fe2O3. Major and trace-element abundances of all samples were re-calculated assuming only iron addition from the postulated protolith (average BIF and shale), and the results revealed atypical enrichments in the iron ores by comparison to average BIF, and more shale-like relative abundances when normalised against the Post-Archaean Average Shale (PAAS). Specifically, BIF-normalised diagrams show relative enrichments by as much as 53-95% for Al2O3; 11-86% for TiO2; and 4-60% for P2O5. By contrast, PAAS-normalised values display enrichments of 1-3% for Al2O3, 0.2-3% for TiO2, and 3-13% for P2O5. Similar observations can be made for the greatest majority of trace elements when normalised against average BIF as compared to normalisation against PAAS. A suite of trace element that include alkali earths (e.g. Ba, Sr) and transition metals (e.g. Ni, Zn) show enrichments that are unrelated to the apparently detrital siliciclastic fraction of the ores, and are therefore linked to a possible hydrothermal input. Fraction-specific extractions were performed via the adaptation of existing dissolution protocols using oxalic acid (iron-oxide fraction) followed by HF digestion (silicate-fraction). The analyses of the produced aliquots using ICP-MS techniques, focused mainly on the REE abundances of the separated ferrous and non-ferrous matrix fractions and their comparisons to bulk-rock REE signatures. The results lend further support to the suggestion that the ore samples contain a predominant shale-like signal which does not directly compare to published REE signatures for supergene or hydrothermal BIF-hosted iron-ore deposits alike. The data therefore collectively point to a post-unconformity epigenetic hydrothermal event/s of iron ore-formation that would have exploited not only BIF but also shale as suitable pre-ore protolith.
- Full Text:
- Date Issued: 2017
- Authors: Moloto, William
- Date: 2017
- Subjects: Iron ore -- South Africa -- Transvaal Supergroup , Hematite -- South Africa -- Transvaal Supergroup , Transvaal Supergroup (South Africa)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/50546 , vital:25998
- Description: The Paleoproterozoic Transvaal Supergroup in the Northern Cape Province of South Africa is host to high-grade, Banded Iron Formation-hosted hematite iron-ore deposits and is the country’s most important source of iron to date. Previous studies suggest the origin of these iron ores to be ancient supergene, and that the ore forming process would have therefore pre-dated deposition of the basal Mapedi shales of the Olifansthoek Supergroup that unconformably overlies the Transvaal strata. The nature of the protolith to the ores has been suggested to be largely BIF of the Asbestos Hills Subgroup, and mainly the Kuruman BIF. The work presented in this thesis seeks to provide insights into the diversity of processes that are likely to have been involved during the genesis of these high-grade iron ores, in the context of constraining the pre-ore lithologies and the relative role of supergene-style, largely residual enrichment processes versus any possible metasomatic hydrothermal effects. This study had as primary focus the application of combined bulk and fraction-specific geochemical applications on representative iron-ore samples from four different localities in the Northern Cape Province, namely King/Khumani, Beeshoek, Heuninkranz and Hotazel. The collected samples show a variety of textures and also capture different pre-unconformity stratigraphic sections of BIF. The key objective was to assess whether the fraction-specific analytical results could provide any firm constraints for the origin of the ferrous and non-ferrous matrix fractions of the ores, namely whether they represent any combinations of protolith residue, allochtonously-introduced detritus or hydrothermally-derived material, and whether the results are comparable and consistent across all samples studied. In particular, constraints were sought as to whether the ore protolith was exclusively BIF or may potentially have contained at least a fraction of other lithologic types, such as shale; and whether there is sufficient evidence to support solely a supergene model for the ores or the data suggest other more epigenetic models of ore formation involving the action of hydrothermal fluids Bulk-rock geochemical analyses reveal the overwhelming dominance of Fe-oxide (as hematite) in all samples, at concentrations as high as 99 wt.% Fe2O3. Major and trace-element abundances of all samples were re-calculated assuming only iron addition from the postulated protolith (average BIF and shale), and the results revealed atypical enrichments in the iron ores by comparison to average BIF, and more shale-like relative abundances when normalised against the Post-Archaean Average Shale (PAAS). Specifically, BIF-normalised diagrams show relative enrichments by as much as 53-95% for Al2O3; 11-86% for TiO2; and 4-60% for P2O5. By contrast, PAAS-normalised values display enrichments of 1-3% for Al2O3, 0.2-3% for TiO2, and 3-13% for P2O5. Similar observations can be made for the greatest majority of trace elements when normalised against average BIF as compared to normalisation against PAAS. A suite of trace element that include alkali earths (e.g. Ba, Sr) and transition metals (e.g. Ni, Zn) show enrichments that are unrelated to the apparently detrital siliciclastic fraction of the ores, and are therefore linked to a possible hydrothermal input. Fraction-specific extractions were performed via the adaptation of existing dissolution protocols using oxalic acid (iron-oxide fraction) followed by HF digestion (silicate-fraction). The analyses of the produced aliquots using ICP-MS techniques, focused mainly on the REE abundances of the separated ferrous and non-ferrous matrix fractions and their comparisons to bulk-rock REE signatures. The results lend further support to the suggestion that the ore samples contain a predominant shale-like signal which does not directly compare to published REE signatures for supergene or hydrothermal BIF-hosted iron-ore deposits alike. The data therefore collectively point to a post-unconformity epigenetic hydrothermal event/s of iron ore-formation that would have exploited not only BIF but also shale as suitable pre-ore protolith.
- Full Text:
- Date Issued: 2017