Mineralogy and geochemistry of permian black shales and carbonate concretions in the lower ECCA formations of the Steytlerville- Jansenville area, southern Karoo basin
- Authors: Maake, Laurentias Tebatso
- Date: 2019
- Subjects: Black shales -- South Africa -- Jansenville , Geochemistry Chemistry, Analytic Mineralogy -- Analysis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/40643 , vital:36206
- Description: The Lower Permian Ecca Group formations of the Karoo Basin of South Africa have recently been identified as a target for shale gas exploration. These units, named the Prince Albert, Whitehill and Collingham formations, comprise organic-rich shales with occasional associated carbonate deposits, and siliciclastic facies. Mineralogical and geochemical investigations were conducted into carbonaceous shales and associated sedimentary rocks in the Jansenville area of the southern Karoo Basin with the ultimate aim to decipher the paleoenvironment and post-depositional conditions of these shales and their associated features such as prominent intra-formational carbonate deposits. Sediments of the main Karoo Basin were deposited from ~350 Ma to ~182 Ma, the end of sedimentation being marked by eruption of basaltic lava. This period, which began with the Dwyka continental glaciation, included tectonism of the Cape Fold Belt, the end-Permian mass extinction at ~250 Ma, and major intrusion of dolerite associated with the lavas of the Karoo Large Igneous Province. Subsequent to this, the basin experienced faulting associated with Gondwana breakup, uplift and intrusion of small volume kimberlite and melilite magmas, and erosion resulting in formation of a major escarpment. Each episode was imprinted upon the Karoo rocks and to a greater or lesser extent erases the signature of older episodes. To decipher the depositional paleoenvironment and post-depositional conditions of the black shales and the dolomite concretions posed a challenge due to deformation, orogeny, metamorphism, and weathering and erosion. Therefore, deep borehole core-logging and sampling was generally preferred over surface fieldwork, and trace elements backed up by scanning electron microscopy-based petrography was the method most relied upon to decipher the redox conditions of the black shales and the intra-formational carbonates. Relevant sections from three SOEKOR boreholes SP1/69, AB1/65 and QU1/65 were logged and carbonate concretions localities studied in four field locations. Samples collected from the core and field localities were prepared for thin section optical, SEM petrographical analysis, mineral identification, modal estimation by XRD, major, and trace element analysis by XRF and Laser Ablation-ICPMS, and acid leaching of a sample subset to determine the degree of pyritization (DOP). Logging of the SOEKOR boreholes indicates that in the western part of the basin all three lower Ecca formations, namely the Prince Albert, Whitehill and Collingham, overlie the tillites of the Dwyka Group, whereas near East London only the Whitehill Formation is present. Dwyka diamictites occur in all the studied boreholes overlying the crystalline basement in AB 1/65 and QU 1/65 boreholes whereas in the SP 1/69 the tillites rest above the quartzite of Witteberg Group of the Cape Supergroup. The shale consists of discontinuous, wavy and straight parallel laminae. Parallel, discontinuous and elongate micro-lenses of very fine-grained quartz are diagnostic and suggest late-stage silicification. Thin laminae of black shale are interlaminated with grey clay. The black shales are composed of quartz and clay minerals (illite and chlorite) as the major crystalline minerals with minor quantities of sulphides and heavy minerals. Organic matter occurs as unstructured, anhedral patches of amorphous material. It contains abundant small (~10nm) and less common larger (~100 nm) pores of subsphaeroidal shape. Carbonates occur as cementation and concretions. Heavy minerals identified by SEM include detrital zircon, thorite, titanite, authigenic fluorite, galena, sphene, and sphalerite and apatite, monazite and epidote-group minerals that appear to be of later stage metamorphic origin, some a product of hydrothermal feldspar alteration. Zircon and monazite show evidence of partial corrosion and/or new overgrowth. Titanite occurs in greater abundance in the SP1/69 section than other boreholes, where it exhibits a porphyroblastic texture suggesting secondary growth. These features all suggest modification of detrital minerals by metamorphic fluids and therefore some possible modification of bulk geochemical composition. Pyrite is abundant, commonly occurring as framboidal and occasional euhedral grains. Pyrite-bearing, calcite veins are common in the Whitehill Formation. Some pyrite is metamorphosed to pyrrhotite in the shales adjacent to dolerite intrusions. The carbonate deposits in the lower Ecca occur mostly as large concretions of 0.5-2.5 m in diameter at intensely faulted areas, and as laterally continuous beds at less intensely faulted areas. They consist of dominant dolomite with calcite (differentiated by thin section staining) and minor associated quartz veins, and appear to have formed in an early diagenetic stage of the black shale. Five different dolomite-rock textures were identified indicating varying crystal growth conditions. Calcite cementation types accompany these dolomite textures. The major types include mosaic, sparry and bladed/prismatic calcite cement. Calcite occurs mainly as cement in pores and grain replacement, as well as crudely radial septerian veins. XRD indicates that the carbonate concretions are made up of more than 90% dolomite, especially within the intensely folded areas. The remaining 10% consist of post-depositional quartz veins and secondary calcite associated with the quartz veins. In one locality (VAAL) the carbonate samples are dominates by bladed/prismatic calcite. The black shales in this study have similar geochemical signature to previously analysed samples from the Karoo Basin and to black shales worldwide. The geochemical signature results from the combined input of detrital sedimentary materials as well as enrichment or depletions acquired from pore water, biological activity and during diagenesis. Positive correlation of K2O, Na2O with Al2O3 suggests control by the detrital contribution. CaO and P2O5, have a negative correlation with Al2O3 suggesting a biogenic source. Elemental ratios suggest that the sediments derive from felsic source rock, most likely Cape Supergroup and underlying crystalline basement. These shales exhibit different degrees of trace-element enrichment relative to global average shale, the approximate order being Pb> V> Zn> Cr> Cu> Co > Ni. Assessment of selected trace elements, V/(V+Ni), V/Cr, Ni/Co and EF Mn ratios describes the paleoenvironment of these sediments to have been partially oxygenated before sulphate reduction interface. The pyrite size distribution, DOP, Fe and S correlation points to an organic matter limited environment, where the main sulphur sink is pyrite rather than organic matter. The DOP and Fe/Al indicated that the sediments became anoxic at the sediment-water interface (early diagenetic stages). V/Cr assessment of the dolomite concretions suggested partially oxygenated environment corresponding to the black shale deposition. The occurrence of concretions at the base of the Whitehill Formation, which has the highest TOC content of 14% compared to other associated formations, is evidence that organic matter preservation was important to their origins. The parameters used here to assess the redox conditions of the black shales and the dolomite concretions in this region of the Karoo Basin suggest a normal marine redox environment, rather than the anoxic Black Sea-type environment. The conditions that affected the lower Ecca formations varied from semi-oxygenated to oxygen depletion environment. The oxygen depletion environment occurred during the deposition of the Whitehill Formation of which organic matter preservation was favoured..
- Full Text:
- Date Issued: 2019
Development of high capacity lithium-manganese-rich cathode materials xLi2MnO3•(1-x)LiMn0.5Ni0.5O2 for lithium ion batteries
- Authors: Rapulenyane, Nomasonto
- Date: 2018
- Subjects: Lithium ion batteries , Electrochemistry Lithium cells
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/34766 , vital:33442
- Description: In this study, a facile synthesis method was developed to produce layered-layered cathode materials with the formula xLi2MnO3•(1-x)LiMO2 (M= Ni and Mn) referred to as lithium-manganese-rich materials for lithium ion batteries. The prepared materials displayed high capacity ≥200 mAh/g at a current density of 20 mA/g in the voltage range of 2.0 V to 4.8 V. In particular the cathode material prepared at pH 10.0 delivered a high initial discharge capacity of 266 mAh/g at 20 mA/g current density and maintained a discharge capacity ≥220 mAh/g at 50 mA/g after 50 cycles. The synthesis method was used to further investigate the effect of lithium ratio in the layered-layered material. Li1+xMn0.6Ni0.2O2, x= 0.2, 0.25, 0.3 and 0.4 cathode materials were produced respectively. The BET surface area analysis results showed that Li1.3Mn0.6Ni0.2O2 material had comparatively higher surface area to the other cathode materials and also delivered good electrochemical results. XPS showed that the cation distribution is affected by the increase in lithium ratio, the Mn4+ percentages decreased significantly with an increase in lithium ratio. All materials peaks deconvoluted into two peaks namely Mn4+ and Mn3+, Li1.3Mn0.6Ni0.2O2 had the highest percentages of the stable Mn4+ 70.8%. Further investigation focused on the effect of the sintering temperature on the structure and the electrochemical performance of Li1+xMn0.6Ni0.2O2, x= 0.25, 0.3 and 0.4 cathode materials. X-ray diffraction showed the same patterns for all cathode materials sintered at 700˚C, 800˚C and 900˚C. Rietveld refined results however, showed that the increase in the sintering temperature, results in a decrease in the Li2MnO3 component percentage in the layered structures. Scanning electron microscopy images further proved that the particle size increases with increasing temperature. The charge–discharge tests of coin cells demonstrated that the materials sintered at 800˚C delivered higher discharge capacities above 200 mAh/g at 20 mA/g current density when compared to the materials made at the lower temperatures. Lastly the cathode material prepared at pH 10.0 was further evaluated in a cell using lithium titanate oxide Li4Ti5O12 as anode material. The cells delivered an initial discharge capacity of 213 mAh/g at 20 mA/g within a voltage range 3.3V-0.5V. The coin cells developed in this work delivered good cycling performance.
- Full Text:
- Date Issued: 2018
The specification and design of a prototype 2-D MPEG-4 authoring tool
- Authors: Viljoen, Deon Walter
- Date: 2003
- Subjects: MPEG (Video coding standard) , Digital video -- Standards , Multimedia systems
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:11092 , http://hdl.handle.net/10948/d1015741 , MPEG (Video coding standard) , Digital video -- Standards , Multimedia systems
- Description: The purpose of this project was the specification, design and implementation of a prototype 2-D MPEG-4 authoring tool. A literature study was conducted of the MPEG-4 standard and multimedia authoring tools to determine the specification and design of a prototype 2- D MPEG-4 authoring tool. The specification and design was used as a basis for the implementation of a prototype 2-D MPEG-4 authoring tool that complies with the Complete 2-D Scene Graph Profile. The need for research into MPEG-4 authoring tools arose from the reported lack of knowledge of the MPEG-4 standard and the limited implementations of MPEG-4 authoring tools available to content authors. In order for MPEG-4 to reach its full potential, it will require authoring tools and content players that satisfy the needs of its users. The theoretical component of this dissertation included a literature study of the MPEG-4 standard and an investigation of relevant multimedia authoring systems. MPEG-4 was introduced as a standard that allows for the creation and streaming of interactive multimedia content at variable bit rates over high and low bandwidth connections. The requirements for the prototype 2-D MPEG-4 authoring system were documented and a prototype system satisfying the requirements was designed, implemented and evaluated. The evaluation of the prototype system showed that the system successfully satisfied all its requirements and that it provides the user with an easy to use and intuitive authoring tool. MPEG-4 has the potential to satisfy the increasing demand for innovative multimedia content on low bandwidth networks, including the Internet and mobile networks, as well as the need expressed by users to interact with multimedia content. This dissertation makes an important contribution to the understanding of the MPEG-4 standard, its functionality and the design of a 2-D MPEG-4 Authoring tool. Keywords: MPEG-4; MPEG-4 authoring; Binary Format for Scenes.
- Full Text:
- Date Issued: 2003
Application of hidden Markov models and their extensions to animal movement data
- Authors: Van Niekerk, Bracken
- Date: 2018
- Subjects: Markov processes Animal locomotion Time-series analysis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/23835 , vital:30624
- Description: Hidden Markov Models (HMMs) have become increasingly popular in animal movement studies as they provide a flexible modelling approach and take the correlation between successive observations into account. They can segment the movement paths into latent states, which can be considered as rough proxies for the behaviours of the animals. This study comprises of two sections, both involving the application of HMMs to large terrestrial mammal movement data. Usually step lengths representing the displacement distances between successive observations, turning angles measuring the tortuosity, or a bivariate input of both variables are used as inputs in the models. It has been found in the literature that the turning angle is either included in the modelling process or it is excluded without much justification for doing so. The first part of this study investigates the nfluence of the turning angle on the model output and resultant interpretations of the HMMs when modelling the trajectories of large terrestrial mammals in southern Africa. Results revealed at different time scales, and for both predator and herbivore species in this study, that the turning angle does not influence the state allocation of the HMMs, which is the main output in terms of interpreting the behaviours of the animals. It is thought in most cases that the inclusion of the turning angle overcomplicates the models unnecessarily without contributing any additional information in terms of the behavioural interpretations or improving the overall fit of the models. This was found for the variety of movements of the species under observation in this study. The second part of this study attempts to validate the state allocation of the HMMs fitted to eland trajectories in the Greater Addo Elephant National Park in the Eastern Cape, with the use of camera trap data. This presented a unique opportunity as this type of data is mainly used for abundance or capture-recapture studies, and the HMMs are rarely validated as the true behaviours of the animals are seldom known. Results revealed that the same diel patterns were detected by the HMMs that were shown by the classified camera trap data. Direct comparisons of the observations where the dates and times matched for the telemetry and camera trap data could be done in several rare instances, which revealed many similarities. Although it was not an ideal comparison, the camera trap data provided a rough validation of the state allocation of the HMMs used in the study.
- Full Text:
- Date Issued: 2018
Reactivity of Rhenium (iii) and Rhenium (V) with multidentate NN-and no-donor ligands
- Authors: Yumata, Nonzaliseko Christine
- Date: 2010
- Subjects: Rhenium , Ligands
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10373 , http://hdl.handle.net/10948/1085 , Rhenium , Ligands
- Description: The reaction of the potentially tridentate Schiff-base chelate Hhaep [Haep = N’-(1- (2-hydroxyphenyl)ethylidene)benzohydrazide] with [ReCl3(benzil)(PPh3)] and trans-[ReOCl3(PPh3)2] produced the neutral oxorhenium(V) complexes cis- [ReOCl2(mep)] [Hmep = 2-(1-iminoethyl)phenol] and cis-[ReOCI2(meb)(PPh3)] [Hmeb = N’-(propan-2-ylidene)benzohydrazide] in ethanol and acetone respectively. In both reactions the Hhaep molecule cleaves to give different coordinated bidentate NO-donor chelates coordinated to the rhenium(V) centers. The X-ray studies reveal that mep is present as a bidentate, monoanionic Schiffbase coordinating through the neutral imino nitrogen and the deprotonated phenolate oxygen in cis-[ReOCl2(mep)]. The bond distances and angles in cis- [ReOCI2(meb)(PPh3)] confirm that meb coordinates to the metal in the enolate form. The distorted octahedral complex fac-[ReCl3(dpa)(PPh3)] was prepared by the reaction of trans-[ReCl3(MeCN)(PPh3)2] with a twofold molar excess of dpa in acetonitrile under a nitrogen atmosphere. The compound dpa.HCl.2H2O was obtained as a by-product in the reaction of dpa with trans-[ReCI3(MeCN)(PPh3)2] in acetonitrile. The reaction of trans-[ReCl3(MeCN)(PPh3)2] with a twofold molar excess of 6- amino-3-methyl-1-phenyl-4-azahept-2-ene-1-one (Hamp) in acetonitrile led to the isolation of cis-[ReCl2(bat)(PPh3)2]. On complexation to the metal center Hamp decomposed to give the coordinated benzoylacetone (bat). Bat is present as a monoanionic bidentate chelate. The complexes [ReVOCI(had)] and [ReIVCl(had)(PPh3)](ReO4) were prepared from the reaction of trans-[ReCl3(MeCN)(PPh3)2] with N,N-bis((2-hydroxybenzyl)-2- aminoethyl)dimethylamine (H2had) in ethanol under various reaction conditions. The treatment of [ReCl3(benzil)(PPh3)] with 2-[((2- pyridinylmethyl)amino)methyl]phenol (Hham) in a 2:1 molar ratio in acetonitrile led to the isolation of the hydrogen-bonded dimer [ReOCl2(ham)]2. The distorted octahedral complex [ReOCl(hap)] [H2hap = N,N-bis(2- hydroxybenzyl)aminomethylpyridine] was prepared from the reaction of trans- [ReCl3(MeCN)(PPh3)2] with a twofold molar excess of H2hap in acetonitrile. The X-ray crystal structure analysis shows that the chloride is coordinated trans to the tripodal tertiary amino nitrogen, with a phenolate oxygen trans to the oxo oxygen.
- Full Text:
- Date Issued: 2010
Formulation development and thermorheological properties of crumb rubber/eva modified bitumen
- Authors: Nare, Keith Dumisani
- Date: 2016
- Subjects: Crumb rubber Bitumen , Vinyl acetate
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/11974 , vital:27015
- Description: The study deals with the formulation development and thermorheological properties of crumb rubber/ethylene vinyl acetate (EVA) modified bitumen with the aim of optimizing the amount of crumb rubber and EVA loadings in bitumen based on thermorheological parameters complex shear modulus, phase angle and rutting parameter. In the modified binders EVA offers plastomer properties whereas the crumb rubber confers elasticity to the bitumen. 13.75% crumb rubber and 2.5% EVA loadings based on aging indices gave the best optimized mixture. The thermorheological behaviour of the best optimized mixture was compared to industrial grade EVA (AP-1) and crumb rubber (AR-1) modified bitumen. Improving aging behaviour of the bitumen was evaluated using four antioxidants: carbon black, hydrated lime, Irganox 1010 and Irgafos 168. The least aging indices at 58˚C and 64˚C were obtained from a 1:1:1 Irganox 1010/hydrated lime/carbon black mixture. SARA (saturates, aromatics, resins and asphaltene) analysis gave the chemical background for application of antioxidants to reduce the propensity of short term aging. To further improve the EVA/crumb rubber optimized mixture for workability FT wax (Sasobit®) was assayed at loadings from 0-2.5%. This was done to match the EVA content and maintain the original maximum loading of 2.5% in the optimized mixture. The phase change abilities of FT wax owing to the high latent heat enabled co-crystallization with the EVA with the elastomeric backbone of crumb rubber acting as support material. The energy-sustainability nexus was found to have worked at less than 1% loading of FT wax in the EVA/crumb rubber modified bitumen. Response surface methodology approach to all the sections of work was used to come up with the optimized mixtures based on rheological parameters complex shear modulus, phase angle and rutting parameter at test temperature 64˚C. The interaction chemistry of bitumen, crumb rubber, EVA and FT wax was found to be first and second order in all cases involving individual contributions and co-interaction amongst the factors. Project costing for each section of work (optimizing section, antioxidant section and FT wax section) was conducted involving the raw materials used, equipment used, labour involved and other costs incurred for all the project work.
- Full Text:
- Date Issued: 2016
The effects of vascular targeted bi-functionalized aunps on hepatic lipid metabolism of a diet-induced rats
- Authors: Singo, Dakalo Gladwell
- Date: 2020
- Subjects: Bile acids
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/47072 , vital:39780
- Description: Introduction: Obesity is a metabolic disease in which the accumulation of excessive fat in the adipose tissue may interfere with the normal maintenance of a healthy state. However, there is only a limited number of drugs approved for the treatment of obesity. For this purpose, target therapies are receiving more attention as a preferred treatment to reduce the burden of chronic diseases which are associated with the current strategies. Nanotechnology is a highly promising field that offers a nanotechnology-based drug delivery system as a novel means of solving issues associated with the toxicity of conventional anti-obesity drugs. Vascular targeted nanotherapy (targeted bi-functionalized nanoparticles) as a strategy that can overcome the current available anti-obesity drugs. Aim: This study sought to understand the effects of nanotherapy in the hepatic lipid metabolism and secretion of bile acids Research focus: The effects of gold nanotherapy on the bile acid biosynthetic enzymes, transporters and lipogenic enzymes of rats that were on a high fat diet. Conclusion: The study shows low expression in the majority of genes responsible for bile acid synthesis and a lipogenic pathway; therefore, the effects of nanotherapy exhibit low toxicity in the hepatic lipid metabolism.
- Full Text:
- Date Issued: 2020
Cytokine properties of CD23 on human Eosinophilic cells
- Authors: Ferreira, Lauren
- Date: 2007
- Subjects: Cytokines , CD23 antigen , Eosinophil
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10333 , http://hdl.handle.net/10948/503 , http://hdl.handle.net/10948/d1012001 , Cytokines , CD23 antigen , Eosinophil
- Description: CD23, the low affinity IgE receptor, is expressed by various cell types and has numerous functions depending on the form of the protein, its interaction with various ligands and the type of cell involved. CD23 is pivotal in the regulation of IgE, with the soluble form involved in up-regulation, while the membrane bound form is involved in the down-regulation. It is clear why it is believed to be a central molecule in allergic responses, and a therapeutic target for the treatment of allergic disease. In this study a recombinant form of the entire extracellular domain of the protein, exCD23, was produced by PCR cloning and expressed in E. coli. His•Tag™s were introduced onto the C-terminus and N-terminus, respectively, in order to simplify the purification procedure. After renaturation and purification, the recombinant exCD23 bound IgE, indicating its activity. From the IgE binding studies it was established that the position of the tag did not influence the binding. GST•Tagged™ exCD23 was also produced in an attempt to increase the solubility of the recombinant protein, but this proved unsuccessful. Butyrate differentiated EoL-1 cells were treated with the Nterminal His•Tagged™ exCD23, and the protein appeared to suppress the secretion of the constitutively expressed cytokines, especially IL-8 and IFN- , when compared to untreated cells. In addition, treatment of the EoL-1 cells with exCD23 had a significant proliferative effect, but could not induce differentiation of this cell line into mature eosinophilic-like cells.
- Full Text:
- Date Issued: 2007
Thermal degradation of diamond compacts: a TEM investigation
- Authors: Westraadt, Johan Ewald
- Date: 2011
- Subjects: Materials -- Thermal properties Chemical weathering
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10948/10829 , vital:26827
- Description: Diamond compacts consist of fine diamond grains bonded together by using high pressure and high temperature. In this study transmission electron microscopy (TEM)was used to study thermal degradation of diamond compacts. Three different types of diamond compacts – namely cobalt polycrystalline diamond (PCD), calcium carbonate PCD, and diamond-SiC composites – were investigated with TEM to understand the processes that occur during synthesis. These compacts were then heated in inert atmospheres and the chemical changes studied with TEM. It was found that PCD, using cobalt as a bonding agent, will degrade after exposure to temperatures above 750ºC. The cobalt pools contain tungsten in solid solution. During heat treatment above 700ºC the solid solution tungsten combines with cobalt and dissolved carbon to form η-phase particles at the cobalt/diamond interface. At higher temperatures or insufficient tungsten levels the rate of dissolved carbon, into the cobalt pool, is too high and the excess carbon will form as graphite in the cobalt pool. Increased levels of solid solution tungsten, in the cobalt, is expected to delay the onset of graphitization in the diamond compact, thereby increasing the thermal stability of the diamond compact. Non-metallic PCD using calcium carbonate as a bonding agent was successfully sintered in this study. TEM revealed similar micro-structural features as in cobalt based PCD. No signs of thermal degradation were found after exposure to 1200ºC in vacuum for this PCD. Contaminants introduced during processing prevented a detailed study of the binder in this system. The effect of substitutional metal atoms and plastic deformation of diamond on the thermal stability of diamond-SiC composites were investigated. A piston cylinder press was developed and used to synthesize diamond-SiC composites with different levels of plastically deformed diamond. It was concluded that substitutional metal atoms and plastic deformation of diamond grains play no role in the thermal degradation of diamond compacts at 750ºC. The thermal degradation of cobalt PCD is therefore completely determined by the cobalt/diamond interaction at 750ºC.
- Full Text:
- Date Issued: 2011
Quantification of greenhouse gas fluxes from soil in agricultural fields
- Authors: Nkongolo, Nsalambi Vakanda
- Date: 2010
- Subjects: Greenhouse gases -- Environmental aspects
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:10645 , http://hdl.handle.net/10948/1474 , Greenhouse gases -- Environmental aspects
- Description: Field studies were conducted at Lincoln University of Missouri (USA) and Hokkaido University (Japan) to: (i) study the relationships between greenhouse gases emissions and soil properties, (ii) assess the influence of agricultural practices on greenhouse gas fluxes and soil properties and (iii) improve the quantification of greenhouse gases from soil in agricultural fields using geospatial technologies. Results showed that besides soil temperature (T), soil thermal properties such as thermal conductivity (K), resistivity (R) and diffusivity (D) and soil pore spaces indices such as the pore tortuosity factor and the relative gas diffusion coefficient (Ds/Do) are controlling factors for greenhouse gases emissions. Soil thermal properties correlated with greenhouse gases emissions when soil temperature could not. The study has found that predicted Ds/Do and correlate with greenhouse gas fluxes even when the air-filled porosity and the total porosity from which they are predicted did not. We have also showed that Ds/Do and can be predicted quickly from routine measurements of soil water and air and existing diffusivity models found in the literature. Agricultural practices do seriously impact greenhouse gases emissions as showed by the effect of mechanized tillage operations on soil physical properties and greenhouse gas fluxes in a corn and soybean fields. In fact, our results showed that tractor compaction increased soil resistance to penetration, water, bulk density and pore tortuosity while reducing air-filled porosity, total pore space and the soil gas diffusion coefficient. Changes in soil properties resulted in increased CO2, NO and N2O emissions. Finally, our results also confirmed that greenhouse gas fluxes vary tremendously in space and time. As estimates of greenhouse gas emissions are influenced by the data processing approach, differences between the different calculation approaches leads to uncertainty. Thus, techniques for developing better estimates are needed. We have showed that Geographic Information Systems (GIS), Global Positioning System (GPS), computer mapping and geo-statistics are technologies that can be used to better understand systems containing large amounts of spatial and temporal variability. Our GIS-based approach for quantifying CO2, CH4 and N2O fluxes from soil in agricultural fields showed that estimating (extrapolating) total greenhouse gas fluxes using the “standard” approach – multiplying the average flux value by the total field area – results in biased predictions of field total greenhouse gases emissions. In contrast, the GIS-based approach we developed produces an interpolated map portraying the spatial distribution of gas fluxes across the field from point measurements and later process the interpolated map produced to determine flux zones. Furthermore, processing, classification and modeling enables the computation of field total fluxes as the sum of fluxes in different zones, therefore taking into account the spatial variability of greenhouse gas fluxes.
- Full Text:
- Date Issued: 2010
Site Fidelity of southern right (Eubalaena australis) and humpback whales (Megaptera novaeangliae) in Algoa Bay, South Africa
- Authors: Drost, Eduard F
- Date: 2016
- Subjects: Marine mammals -- South Africa -- Algoa Bay Southern right whale -- South Africa -- Algoa Bay Humpback whale -- South Africa -- Algoa Bay
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/21735 , vital:29742
- Description: Mysticetes, or baleen whales, make up one of two sub-orders of the Order Cetacea within the Class Mammalia (Drikamer et al, 2013). It contains three families, each characterized by baleen plates (Drikamer et al, 2013). These baleen plates consist of keratin that replaced the tooth structures for feeding in these mammals (Drikamer et al, 2013). Other biological characteristics of these animals include paired external nares (blowholes), a sternum consisting of a single bone, symmetrical skull and the most conspicuous of all, the body length of between ten to thirty metres (Drikamer et al, 2013). It is thought that the size characteristic was probably the main factor when categorising them as cetaceans, with the Latin word ‘Cetus’ referring to ‘sea monster’ (Carnaby, 2006). In this literature review, the focus will fall on two species of mysticetes from separate families, namely that of the southern right whale, Eubalaena australis of the Balaenidae family, and the humpback whale, Megaptera novaeangliae of the Balaenopteridae family. Emphasis in this review will fall on the aspect of site fidelity of the mother-calf pairs.
- Full Text:
- Date Issued: 2016
Sketch-based digital storyboards and floor plans for authoring computer-generated film pre-visuals
- Authors: Matthews, Timothy
- Date: 2012
- Subjects: Computer graphics , Computer vision
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10463 , http://hdl.handle.net/10948/d1008430 , Computer graphics , Computer vision
- Description: Pre-visualisation is an important tool for planning films during the pre-production phase of filmmaking. Existing pre-visualisation authoring tools do not effectively support the user in authoring pre-visualisations without impairing software usability. These tools require the user to either have programming skills, be experienced in modelling and animation, or use drag-and-drop style interfaces. These interaction methods do not intuitively fit with pre-production activities such as floor planning and storyboarding, and existing tools that apply a storyboarding metaphor do not automatically interpret user sketches. The goal of this research was to investigate how sketch-based user interfaces and methods from computer vision could be used for supporting pre-visualisation authoring using a storyboarding approach. The requirements for such a sketch-based storyboarding tool were determined from literature and an interview with Triggerfish Animation Studios. A framework was developed to support sketch-based pre-visualisation authoring using a storyboarding approach. Algorithms for describing user sketches, recognising objects and performing pose estimation were designed to automatically interpret user sketches. A proof of concept prototype implementation of this framework was evaluated in order to assess its usability benefit. It was found that the participants could author pre-visualisations effectively, efficiently and easily. The results of the usability evaluation also showed that the participants were satisfied with the overall design and usability of the prototype tool. The positive and negative findings of the evaluation were interpreted and combined with existing heuristics in order to create a set of guidelines for designing similar sketch-based pre-visualisation authoring tools that apply the storyboarding approach. The successful implementation of the proof of concept prototype tool provides practical evidence of the feasibility of sketch-based pre-visualisation authoring. The positive results from the usability evaluation established that sketch-based interfacing techniques can be used effectively with a storyboarding approach for authoring pre-visualisations without impairing software usability.
- Full Text:
- Date Issued: 2012
The development of a commercial production process for p-menthane-3,8-diol
- Authors: Rust, Nico
- Date: 2009
- Subjects: Insect pests -- Control , Repellents
- Language: English
- Type: Thesis , Doctoral , DTech
- Identifier: vital:10427 , http://hdl.handle.net/10948/d1018273
- Description: The synthesis of p-menthane-3,8-diol via the acid-catalyzed cyclization of citronellal in a dilute aqueous sulphuric acid medium was investigated using conventional batch and continuous systems in order to develop a commercial production process for said p-menthane-3,8-diol (PMD). The batch studies conducted during the first part of this study showed that the formation of PMD from citronellal occurs via an intra-molecular Prins reaction that results in the formation of both the desired PMD product, as well as the partially hydrated isopulegol. It was shown that the formationof the by- product, PMD-acetal, results from the reaction between an intermediate, 5-methyl-2- isopropylcyclohexanol, and the citronellal starting material, and not from the reaction between PMD and citronellal as previously reported. Kinetic studies confirmed the existence of a complicated kinetic model. The formation of PMD from citronellal displayed typical pseudo first order kinetics up to conversions of 70 after which the kinetic model becomes complicated as the result of the establishment of quasi equilibrium reactions between PMD and isopulegol (dehydration of PMD and hydration of isopulegol) and between PMD the PMD-acetal, both systems being acid catalysed. The PMD-acetal formation reaction appears to be second order with respect to PMD. Scale-up studies of the batch process to 30L and 50L scales showed that it would be extremely difficult to limit the level of PMD-acetal formation below the desired level of 1 percent, even if citronellal conversions are restricted to about 50 percent. During studies conducted on a commercially availablemicro-structured organic synthesis plant (OSP) it was shown that it is possible to perform the PMD reaction as a continuous process. The results obtained showed that the use of a micro-mixer such as the caterpillar micro-mixer did not provide enough residence time in order for desirable conversions (- 40 percent) to be obtained. By combining themicro-mixer with delay-loops of different thicknesses and lengths, and using increasing reaction temperatures, it was shown that the conversion of citronellal could be improved to some extent, but compared poorly to the expected conversions for a well-stirred batch reactor. By packing selected delay loops with inert SiC particles, improved mass transfer was observed between the organic and aqueous phases as reflected in the increased conversion of citronellal. Using the observations that were made during the use of the OSP, a continuous-flow, tubular reactor system was designed and constructed. Advanced statistical techniques were used to investigate the effect of variables such as temperature, acid concentration, reactor length, flow rate and the organic to aqueous ratio on the rate and selectivity of the reaction. Mathematical models were derived for citronellal conversion, yield of PMD and yield of PMD- acetals, and used to predict the concentrations of citronellal, PMD and PMD-acetals at set experimental conditions. The results obtained showed that it was possible to obtain a product which approached desired specifications.Downstream processing of the PMD reaction mixture as it exits the reactor requires phase separation and neutralization of the acid catalyst solution, followed by further work-up to recover unreacted starting material and intermediates for recycle back to the synthesis reactor, followed by purification of crude PMD to the desired specification. The study showed that neutralization, prior or after phase separation, does not affect the selectivity of the PMD to such a great extent, but does influence the relative conversion due to extended contact of the catalyst with the organic phase after the reaction is terminated. Recovery of unreacted citronellal and isopulegol could be achieved by a simple vacuum evaporation step, which may either be carried out in a batch manner using traditional distillation equipment, or in a continuous process using wiped-film (short path) techniques. It was also shown that selective crystallization of PMD from the crude product mixture by addition of a solvent, such as heptanes or hexane proved to be the best way of achieving the desired product specification.
- Full Text:
- Date Issued: 2009
Development and validation of in-process control test kits for biodiesel production
- Authors: Fibi, Pumza Oscarine
- Date: 2013
- Subjects: Biodiesel fuels -- South Africa , Biomass energy -- South Africa
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10416 , http://hdl.handle.net/10948/d1012645 , Biodiesel fuels -- South Africa , Biomass energy -- South Africa
- Description: The production of biodiesel from vegetable oils is not a new technology; it has been around since the 1950’s and both the research in terms of the different feedstock that can be used and the production of biodiesel has since been gaining momentum as there needs to be a new, sustainable and domestic alternative to petroleum fuels. These petroleum fuels pose enormous threats to the environment and therefore need to be replaced as they are mostly contributing to climate change and global warming not to mention the frequent price hikes which are crippling the South African economy. Biodiesel production using vegetable oils seems to be and is the future and a law has recently been passed which sanctions the production of biofuel locally.[1] South African fuel producers will instigate obligatory blending of fossil fuel with biofuel as the country moves to encourage investment in its biofuels sector. The production of biodiesel locally and the blending of biodiesel with other petroleum products will reduce the country’s dependence on imported fuel. The already established petrochemical companies like BP, Sasol and Engine are therefore mandated to purchase these biofuels if and when the biofuels meet the required South African National Standard (SANS) 1935 requirements. This is then where the challenge comes as most of these growing biofuel companies cannot afford to purchase testing equipment.The growing companiesthen discover upon completion of the biofuel manufacturing process that their product does not meet the required standard specification. The failure translates to a financial loss as the final product can possibly not be reworked. The aim of the project is then to assist these companies who are manufacturing biofuel, by providing them with in-house biofuel process methods which will allow for early detection, should there be a need to redo a step in the process and not wait until the completion of the production process. These in-house process-testing methods will range from pH determination, titration tests which will determine the soap content and the percentage free fatty acid content, water determination, density and visual testing. It is not cost-effective for these biodiesel manufacturers to send their samples for outsource testing as evidently the results obtained would be out of specification hence the need to provide these biodiesel manufacturers with in-house analytical testing techniques that will aid in monitoring of the biodiesel production.
- Full Text:
- Date Issued: 2013
Impacts of African elephant feeding on white rhinoceros foraging opportunities
- Authors: Prinsloo, Dominique
- Date: 2017
- Subjects: Herbivores -- Ecology -- South Africa , Grassland ecology -- South Africa Animal-plant relationships -- South Africa Ecology
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/13768 , vital:27306
- Description: In this study, I investigated the interaction between two megaherbivores, the African elephant and white rhinoceros, that has the potential to impact grazing lawns of which white rhino are the creators and maintainers and elephants are potentially the modifiers. I hypothesized that as elephants browse, they discard a variety of coarse woody debris onto the ground; should this woody debris (of varying amounts and sizes) fall onto grazing lawns, white rhino either move them, consume grass around the woody debris or abandon the lawn entirely. If high levels of woody debris are deposited here, grazing by white rhino is likely to be prevented, at which time I predicted that mesoherbivores would have a competitive advantage in accessing forage that white rhino cannot. I examined the mechanistic links between different levels of elephant-deposited woody debris and grass response at a point scale and feeding patch spatial scale of grazing lawns in an African savanna. In addition, I assessed the response of mesoherbivores in terms of vigilance behaviour with increasing levels of predation risk posed by increasing levels of woody debris. I present the first evidence of an indirect effect of elephant on white rhino foraging behaviour. I demonstrate how increasing levels of woody debris lead to a decreasing probability of foraging by white rhino. I also demonstrate how the probability of foraging by mesoherbivores increases as the amount of forage increases. However, since this study took place during a severe drought where resources are extremely limited, I was unable to properly separate the effects of elephant-deposited woody debris from the severe lack of rainfall on grass response and subsequently herbivore foraging behaviour. Due possibly to the drought, mesoherbivores responded less or not at all to risk factors such as woody debris therefore woody debris was not a predictor of vigilance behaviour in my study. This study contributes to our understanding of how the impacts of elephants, as ecosystem engineers, have cascading effects on savanna ecosystems. My study showed that elephant impact mediates the foraging behaviour of white rhino during a drought. However, under average rainfall periods, my original hypothesized effect of the indirect impacts of elephants on white rhino foraging and grazing lawn dynamics could still hold. This key hypothesis that I was unable to test under ‘normal’ conditions due to the drought is still valid and functionally important for understanding the ecosystem processes driving grazing lawn formation, persistence and composition in African savannas where elephants and white rhinos coexist.
- Full Text:
- Date Issued: 2017
Study of the skincalm filling process at Aspen Pharmacare applying some six sigma principles
- Authors: Marx, Johannes
- Date: 2005
- Subjects: Ointments -- Packaging , Six sigma (Quality control standard)
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10369 , http://hdl.handle.net/10948/184 , Ointments -- Packaging , Six sigma (Quality control standard)
- Description: Aspen Pharmacare is listed on the Johannesburg Securities Exchange South Africa (JSE) and is Africa’s largest pharmaceutical manufacturer. The company is a major supplier of branded pharmaceutical and healthcare products to the local and selected international markets. For decades, Aspen has manufactured a basket of affordable, quality, and effective products for the ethical, generic over-the-counter (OTC) and personal care markets. Aspen is also the leading supplier of generic medicines to the public sector, providing comprehensive coverage of the products on the Essential Drug List. Aspen continues to deliver on its commitment toward playing a role in social responsibility diseases such as HIV/AIDS, tuberculosis and malaria. In August 2003 Aspen developed Africa’s first generic anti-retroviral drug, namely Aspen-Stavudine. Aspen’s manufacturing facilities are based in Port Elizabeth (PE) and East London. Aspen has recently completed an Oral Solid Dosage (OSD) manufacturing facility worth approximately R150 million in PE. The Group manufactures approximately 20 tons of product daily and in excess of 400 tons of solid dosage pharmaceuticals, which equates to more than 2 billion tablets. In addition, more than 3 million litres of liquid pharmaceuticals and over 200 tons of pharmaceutical creams and ointments are produced per year [1]. Aspen excels at delivering quality products and services, exceeding customer expectations, complying with international standards in an environment that cultivates technical expertise and innovation. Following this philosophy through to the shop floor areas mean that there are always initiatives in continuous production improvement. One of these improvement projects introduced is called Six Sigma. 8 Ten members of the staff, selected from different expertise fields in the company were trained in Six Sigma. Knowledge gained from the two week training course were applied to different areas in the factory using Six Sigma principles. This dissertation focuses on the study undertaken in one of production areas, namely the filling process of the ointments and creams at the Aspen Port Elizabeth facility.
- Full Text:
- Date Issued: 2005
Synthesis and characterization of novel platinum complexes : their anticancer behaviour
- Authors: Myburgh, Jolanda
- Date: 2009
- Subjects: Complex compounds -- Synthesis , Platinum compounds , Antineoplastic agents
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10429 , http://hdl.handle.net/10948/d1018621
- Description: In this dissertation novel non-leaving groups were employed to synthesize platinum complexes which can contribute to the understanding or improvement of anticancer action. These complexes basically consist of (NS)-chelate and amineplatinum complexes. Bidentate (NS)-donor ligands were used as non-leaving ligands in the syntheses of platinum(II) complexes with iodide, chloride, bromide and oxalate anions as leaving groups. These complexes were synthesized and studied since many questions regarding the interaction of sulfur donors and platinum still exists. These relate to thermodynamic and kinetic factors and their influence on anticancer action. In this dissertation the properties of novel platinum(II) complexes of a bidentate ligand having an aromatic nitrogen-donor atom in combination with a thioethereal sulfur atom capable of forming a five membered ring with platinum(II) were studied. The general structure of the (NS) -ligands used were N-alkyl-2-methylthioalkyl imidazole. Alkyl groups used were methyl, ethyl and propyl. Although amine complexes of platinum have been extensively studied there are some new aspects of these that are worthwhile investigating. In this dissertation amines having planar attachments which will be at an angle with the coordination plane viz. benzylamine and amines having cyclic aliphatic groups namely cyclopropyl and cyclohexyl were investigated. Some of the (NS) - and amineplatinum(II) complexes were oxidised to their mononitroplatinum(IV) analogues . The motivation for the synthesis of these complexes was the greater kinetic stability of platinum(IV) and recent research has shown that a specific type of platinum(IV) compound shows suitable properties as an anticancer agent. These complexes were characterised by a variety of spectral means (IR, NMR, mass spectroscopy) as well as elemental analysis, solubility determinations, thermal analysis (TGA), ionization studies and finally their anticancer behaviour towards three different cell lines(Hela, MCF 7, Ht29) and in this process they were compared to the behaviour of cisplatin as a reference. A few have shown promising anticancer behaviour.
- Full Text:
- Date Issued: 2009
Ecological assessment and biogeography of coastal vegetation and flora in southern Mozambique
- Authors: Massingue, Alice Obed
- Date: 2019
- Subjects: Coastal plants -- Mozambique , Coastal plants Marine biodiversity -- Mozambique Coastal biodiversity -- Mozambique
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10948/40988 , vital:36280
- Description: This study considered aspects of the vegetation of the coastal zone of southern Mozambique, an area with a rich biodiversity. The vegetation and flora were assessed in their current state including the associated anthropogenic pressures. The environmental conditions that determined the distribution of the vegetation were evaluated. A hierarchical classification, description and ecological interpretation of the vegetation and flora of the coastal zone in southern Mozambique are presented. Analysis was based on 242 sample quadrats that were distributed in a stratified manner throughout the study area. The vegetation could be grouped into six distinct types of vegetation: Dune Forest, Coastal Forest, Coastal Grassland, Coastal Miombo, Coastal Savanna and Coastal Woodland. Species diversity was high for the all the vegetation types, particularly in the woody elements. A total of 673 species in 410 genera was recorded. They represented 104 families with Fabaceae and Rubiaceae being the most common. Of these, 6.6% were endemic or near-endemic to the coastal zone of southern Mozambique with Coastal Forest being the habitat with the greatest endemism. All soils from different vegetation types had poor agricultural potential. Soil properties were the strongest defining environmental feature separating the vegetation types: e.g. pH was high in Dune Forest compared to the others. Results from Maxent modelling suggest that the distribution of endemic species is influenced by a combination of climatic and non-climatic variables. Soil type, temperature annual range and precipitation of the driest month were the most important predictor variables. Overlaying the potential distributions of the seven selected species indicated two areas of abundance of endemic species – these should be given attention for conservation. Endemic species are not well protected in southern Mozambique – their sampled and potential habitats are largely outside protected areas. Hence, additional reserves should be created to improve their protection. Most endemic and near-endemics species were found in the south, from Ponta de Ouro (Matutuine, south of Maputo Province) to Manhica district (north of the Maputo Province) forming part of the Maputaland Centre of Endemism. A second concentration of endemism was found in the Inhambane Province, specifically the Inhassoro and Vilanculos districts. This is proposed to be an Important Plants Area (IPA). Because most endemics and near-endemics are found in the Coastal Forest, their main threat is harvesting for charcoal production, although none of the endemic species are specifically targeted for charcoal production. In Inhambane they are also threatened by the tourism industry, agriculture and settlements. The impact of the habitat destruction on endemic species is expected to cause severe declines in the near future. The tourism industry and harvesting of trees for charcoal production and over-frequent fires are the main drivers of vegetation loss in this region. Shifting agriculture, harvesting for firewood and construction materials, cattle grazing (at a minor scale) are also impacts, but these were only observed in a small area of Maputo Province. Although the study was done in coastal zone of southern Mozambique, effective management of whole coastal zone of the country will be required to maintain a functioning and diverse ecosystem. Priorities for management are to ensure that forests are protected, in particular, Dune Forest. Actions are required to minimise degradation of coastal vegetation. Further research on Coastal Forest restoration should be planned, as field observations in this study confirm that forest in the coastal zone of southern Mozambique has resilience.
- Full Text:
- Date Issued: 2019
Rehabilitation of the Orange River Mouth Salt Marsh : seed, wind and sediment characteristics
- Authors: Shaw, Gregory Alan
- Date: 2007
- Subjects: Salt marshes -- Orange River , Rivers -- South Africa -- Environmental aspects , Orange River -- Ecology
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10626 , http://hdl.handle.net/10948/603 , http://hdl.handle.net/10948/d1012010 , Salt marshes -- Orange River , Rivers -- South Africa -- Environmental aspects , Orange River -- Ecology
- Description: The Orange River is an important source of freshwater and like many other wetlands in semi-arid regions, supports various social (Spurgeon, 1998), economic (Spurgeon, 1998; Bornman et al., 2005) and ecological functions. The saltmarsh at the Orange River Mouth has become degraded over time following numerous anthropogenic impacts. As a result the Transboundary RAMSAR site was placed on the Montreux record emphasising the importance for rehabilitation. The potential of the marsh for natural rehabilitation was assessed through three physical factors which were considered to have the most influence on the saltmarsh i.e. 1) sediment 2) water 3) wind. Three sampling areas were chosen to investigate the sediment characteristics of the ORM saltmarsh and the suitability for seed germination and adult survival. Site A was representative of the general marsh area, Site B was thought to have favourable sediment conditions for saltmarsh growth because of the large numbers of seedlings and Site C was prone to inundation by wind blown sediment. The sites were sampled in 2005 (dry conditions) and in 2006 after high rainfall and river flooding. Electrical conductivity (EC) of the sediment throughout the marsh was hypersaline in many instances above the tolerance range for S. pillansii (> 80 mS.cm-1) The freshwater event in 2006 lowered salinity significantly in two of the three sites. Differences in sediment characteristics were also compared for three habitats i.e. driftlines, open sites and under vegetation. Driftlines (C. coronopifolia = 872 seedlings m-2; S. pillansii = 1296 seedlings m-2) and the microhabitat associated with adult plants (C. coronopifolia = 803 seedlings m-2; S. pillansii = 721 seedlings m-2) created favourable conditions for seedling growth, however open unvegetated (C. coronopifolia = 56 seedlings m-2; S. pillansii = 49 seedlings m-2) areas had significantly lower seedling density. Due to the marsh currently being in a desertified state this study aimed to establish whether the remaining vegetation could produce enough seed to revegetate the marsh. Laboratory studies indicated that seeds of both species germinated best in freshwater (0 psu). The germination of S. pillansii seeds was 40 percent at 0 psu compared to 5 percent at 35 psu. After storage under hypersaline conditions (35 psu) C. coronopifolia showed 100 percent seed germination when returned to freshwater whereas storage at 70 psu decreased the viability of S. pillansii seeds. The plants are producing adequate seed that will allow for regrowth and rehabilitation if sediment and groundwater characteristics are suitable for seed germination, seedling growth and adult survival. However the increase in bare areas at the Orange River mouth as a result of salt marsh dieback has increased the available sediment source. The wind blown sediment has covered large areas of the remaining adult salt marsh vegetation, particularly in the northern corner at Site C, causing further die-back.
- Full Text:
- Date Issued: 2007
Ecology of key cerithioidean gastropods in the mangroves of the iSimangaliso Wetland Park, KwaZulu-Natal South Africa
- Authors: Raw, Jacqueline Leoni
- Date: 2017
- Subjects: Gastropoda -- South Africa -- KwaZulu-Natal Mangrove ecology -- South Africa -- KwaZulu-Natal
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10948/11942 , vital:27009
- Description: Gastropods are one of the most diverse species groups in mangrove habitats, however, many of their specific roles in relation to ecological patterns and processes are currently largely unknown. The overall aim of this research project was to provide basic ecological information for key gastropod species from subtropical mangroves within a protected area. South African mangroves cover relatively small areas and are restricted to estuaries, these habitats therefore present unique opportunities and challenges to the species that occur in them. Three gastropod species, Terebralia palustris, Cerithidea decollata, and Melanoides tuberculata, all occur at their natural southernmost range limit within South Africa and were selected based on their prominence and occurrence in mangrove habitats of the iSimangaliso Wetland Park, a UNESCO World Heritage Site. Trophic linkages and resource partitioning, resource utilization rates, and ecological resilience were investigated respectively using: 1) a stable isotope (δ15N and δ13C) approach; 2) an experimental approach to quantify feeding dynamics (ingestion rate, consumption/digestion efficiency and grazing impact); and 3) a mixed-effects modelling approach to relate population responses to environmental variables. The diet of T. palustris was seasonally variable and a number of sources were incorporated by different sized snails, but their grazing impact on microphytobenthos was not significant. The results also indicated an ontogenetic shift in the dietary niche for T. palustris through robust partitioning of resources between different size classes. The diets of C. decollata and M. tuberculata were dominated by different primary resources as a function of where they occurred in the mangroves. Melanoides tuberculata consumed a wide variety of primary resources, a typical trait of an opportunistic generalist species. The ingestion rate of M. tuberculata was not dependent on the availability of microphytobenthos, and was highest when conditions were oligotrophic. The resilience of C. decollata was related to the tree-climbing behaviour of this species and its occurrence was best explained by sediment conductivity. These responses were considered in conjunction to what has previously been reported on the resilience of the mangrove trees. The results of this research project have provided new basic ecological information for all three gastropod species in this data-deficient subtropical region. This information can potentially be used in comparative studies for these species in other regions or in broader scale ecological studies. Terebralia palustris has recently experienced a range contraction along the South African coastline. This research project has shown that the diet of this species is highly variable and that food limitation and competition for resources should be considered as potential drivers of the local decline. Cerithidea decollata has in contrast expanded its distributional range in this region. This research project has shown that this species has a generalist diet and exhibits traits in relation to tolerance that are expected to have facilitated its expansion into temperate saltmarsh habitats that occur in dynamic estuaries. Melanoides tuberculata is a globally invasive species, and as South African populations are within its native range, ecological information from this region is valuable as it can be used to investigate the potential ecological effects following introduction into new habitats beyond the native range. Biological drivers have a significant impact on mangrove ecosystem functioning, particularly in relation to recycling and the retention of organic carbon generated through primary productivity. Understanding the ecological linkages that maintain ecological functioning and stability is therefore an important step towards conserving and sustainably managing threatened ecosystems such as mangrove forests.
- Full Text:
- Date Issued: 2017