Removal and photocatalysis of 4-Nitrophenol using metallophthalocyanines
- Authors: Marais, Eloise Ann
- Date: 2008
- Subjects: Photocatalysis , Catalysis , Electrochemistry , Nitrophenols , Phthalocyanines
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4343 , http://hdl.handle.net/10962/d1005005 , Photocatalysis , Catalysis , Electrochemistry , Nitrophenols , Phthalocyanines
- Description: Photodegradation of 4-nitrophenol (4-Np) in the presence of water-soluble zinc phthalocyanines and water-insoluble metallophthalocyanines is reported. The water-soluble phthalocyanines employed include zinc tetrasulphophthalocyanine (ZnPcS[subscript 4]), zinc octacarboxyphthalocyanine (ZnPc(COOH)[subscript 8]) and a sulphonated ZnPc containing a mixture of differently sulphonated derivatives (ZnPcS[subscript mix]), while the water-insoluble phthalocyanines used include unsubstituted magnesium (MgPc), zinc (ZnPc) and chloroaluminium (ClAlPc) phthalocyanine complexes and the ring-substituted zinc tetranitro (ZnPc(NO[subscript 2])[subscript 4]), zinc tetraamino (ZnPc(NH[subscript 2])[subscript 4]), zinc hexadecafluoro (ZnPcF[subscript 16]) and zinc hexadecachloro (ZnPcCl[subscript 16]) phthalocyanines. The most effective water-soluble photocatalyst is ZnPcS[subscript mix] in terms of the high quantum yield obtained for 4-Np degradation (Φ[subscript 4-Np]) as well as its photostability. While ZnPc(COOH)[subscript 8] has the highest Φ[subscript 4-Np] value relative to the other water-soluble complexes, it degrades readily during photocatalysis. The Φ[subscript 4-Np] values were closely related to the singlet oxygen quantum yields Φ[subscript Δ] and hence aggregation. The rate constants for the reaction with 4-Np were kr = 0.67 x 10[superscript 6] mol[superscript -1] dm[superscript 3] s[superscript -1] for ZnPcS[subscript mix] and 7.7 x 10[superscript 6] mol[superscript -1] dm[superscript 3] s[superscript -1] for ZnPc(COOH)[subscript 8]. ClAlPc is the most effective photocatalyst relative to the other heterogeneous photocatalysts for the phototransformation of 4-Np, with 89 ± 8.4 % degradation of 4-Np achieved after 100 min. The least effective catalysts were ZnPcCl[subscript 16] and MgPc. The final products of the photocatalysis of 4-Np in the presence of the homogeneous photocatalysts include 4-nitrocatechol and hydroquinone, while degradation of 4-Np in the presence of the heterogeneous photocatalysts resulted in fumaric acid and 4-nitrocatechol. ClAlPc was employed for the heterogeneous photocatalysis of the non-systemic insecticide, methyl paraoxon. Complete degradation of the pesticide was confirmed by the disappearance of the HPLC trace for methyl paraoxon after 100 min of irradiation with visible light. The removal of 4-Np from an aqueous medium using commercially available Amberlite[superscript ®] IRA-900 modified with metal phthalocyanines was also investigated. The metallophthalocyanines immobilised onto the surface of Amberlite[superscript ®] IRA-900 include Fe (FePcS[subscript 4]), Co (CoPcS[subscript 4]) and Ni (NiPcS[subscript 4]) tetrasulphophthalocyanines, and differently sulphonated phthalocyanine mixtures of Fe (FePcS[subscript mix]), Co (CoPcS[subscript mix]) and Ni (NiPcS[subscript mix]). Adsorption rates were fastest for the modified adsorbents at pH 9. Using the Langmuir-Hinshelwood kinetic model, the complexes showed the following order of 4-Np adsorption: CoPcS[subscript mix] > NiPcS[subscript 4] > NiPcS[subscript mix] > FePcS[subscript 4] > FePcS[subscript mix] > CoPcS[subscript 4]. The adsorbents were regenerated using dilute HNO[subscript 3], with 76 % (7.6 x 10[superscript -5] mol) of 4-Np recovered within 150 min.
- Full Text:
- Date Issued: 2008
An intergrated continuous flow system for the manufacture of biodiesel from waste cooking oil using a heterogeneous acid catalyst and homogeneous base catalyst
- Authors: Mathe,Francis Matota
- Date: 2017
- Subjects: Biodiesel fuels industry , Catalysis , Vegetable oils as fuel
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/44460 , vital:37837
- Description: The continuous flow production of biodiesel from waste cooking oil (WCO) was investigated in this study. Two different methods of biodiesel production were investigated. The first method involved the acid esterification of free fatty acids (FFAs). In the biodiesel community, the esterification of FFAs in WCO is usually regarded as the pre-treatment stage of biodiesel production using low-quality feedstock.The second method involved the transesterification of triglycerides in WCO. Homogeneous catalysts (NaOH or H2SO4) and heterogeneous catalysts (NaOH/ZnO, Sn/ZnO, Amberlyst-15, Amberlite-IRA 904, Fe/Bentonite and Amberlite IRN 78) were evaluated in the transesterification reaction. Catalyst screening was done using a batch reactor. NaOH gave a high úME content of 96.7% and was chosen as the optimum catalyst for the reaction.The main aim of the project was to make an integrated system that incorporates the esterification and transesterification reaction in the flow production of biodiesel using WCO. The system was developed using the conditions obtained from optimum studies of the separate reactions. Slight adjustments based on further experimental work were made to create an efficient system. The effect of excess methanol from the first step on the concentration of NaOH in the second phase was investigated. It was shown that the excess methanol decreases the concentration of the NaOH and this decreases the úMEs in the final mixture of biodiesel.
- Full Text:
- Date Issued: 2017
Photocatalytic reduction of CO2 by cobalt doped TiO2 and ZnO micro/nanostructured materials
- Authors: Mgolombane, Mvano
- Date: 2020
- Subjects: Nanostructures , Catalysis , Nanotechnology , Chemistry
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/49171 , vital:41607
- Description: Large emissions of carbon dioxide (CO2) in the atmosphere have caused many harmful effects on humans and the environment. Carbon dioxide is a good source C and is used in a number of applications such as synthesis of fossil fuels. Redox reaction of CO2 and H2O with photocatalysts such as TiO2 and ZnO to produce solar fuels is a promising approach in reducing the environmental impacts of greenhouse gasses. This dissertation describes an in-depth synthesis of four photochemical catalysts and their photocatalytic conversion of CO2 to methanol, thereby addressing the above-mentioned problems by applying synthesised nano-based catalysts. Prior to photocatalytic reduction studies, catalysts such as TiO2, Co-doped TiO2, Co-doped TiO2/rGO, ZnO, Co-doped ZnO and Co-doped ZnO/rGO were synthesized and characterized using various spectroscopic and imaging techniques such as Powder X-Ray Diffraction (PXRD), Scanning Electron Microscopy (SEM), Transmission Electron Micrograph (TEM), X-ray Photoelectron Spectroscopy (XPS), Brunner- Emmet- Teller measurement (BET), Thermogravimetry Analysis (TGA) and UV-Vis Diffuse Reflectance Spectroscopy (UV-Vis-DRS). The conversion yield of CO2 to methanol on TiO2, Co-doped TiO2 and Co-doped TiO2/rGO reached 32.3 μmol/gcat, 730 μmol/gcat and 936 μmol/gcat, respectively, after 7 h of irradiation. Theoretical studies via Density functional theory (DFT) revealed that doping TiO2 with Co ions facilitated the formation of adsorbed carbonate or CO2•- species, as CO2 adsorbs onto Co-doped TiO2 surface with binding energy (BE) of -18.12 KJ/mol. The photocatalytic activities of ZnO-based nanomaterials found that Co-doped ZnO/rGO with high ratio of Co, reduced graphene (rGO) and large surface area (10.62 m2g-1) possessed higher CH3OH (30.1 μmol/g) in comparison with Co-doped ZnO (27.3 μmol/g) and ZnO (7.5 μmol/g). The research will deepen the understanding that TiO2 based photocatalyst show higher activity and the mole ratio (Ti/Zn:Co) influences nanocomposites performance and provide new ideas for designing efficient photocatalysts.
- Full Text:
- Date Issued: 2020
Studies towards the synthesis of novel tridentate ligands for use in ruthenium metathesis catalysts
- Authors: Millward, Tanya
- Date: 2009
- Subjects: Ligands , Catalysis , Metathesis (Chemistry) , Ruthenium , Complex compounds
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4360 , http://hdl.handle.net/10962/d1005025 , Ligands , Catalysis , Metathesis (Chemistry) , Ruthenium , Complex compounds
- Description: This work has focussed on the preparation of a variety of tridentate ligands, designed to form ruthenium complexes as potential metathesis catalysts. Various approaches to the tridentate, malonate-tethered imidazolidine system have been investigated, and a promising route to accessing ligands of this type is discussed. A tridentate malonate-tethered pyridine ligand has been successfully prepared and its dithallium salt has been accessed by hydrolysis with thallium carbonate; approaches to a longer-chain analogue have also been investigated. A thallium pyridine-2,6- dicarboxylate ligand has been has been successfully prepared, as have a range of pyridine diamine ligands, with various alkyl and aromatic substituents on the amine donor atoms. Preliminary investigations into the potential of these compounds as ligands for alkylidene ruthenium complexes are reported using molecular modelling techniques. The geometries and steric energies of the ligands and their corresponding complexes have been analysed, and results obtained from two different software packages are compared. Finally, some preliminary complexation studies have been undertaken.
- Full Text:
- Date Issued: 2009
The design and synthesis of multidentate N-heterocyclic carbenes as metathesis catalyst ligands
- Authors: Truscott, Byron John
- Date: 2011
- Subjects: Carbenes (Methylene compounds) , Heterocyclic compounds , Ligands , Ligands -- Design , Metathesis (Chemistry) , Catalysis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4304 , http://hdl.handle.net/10962/d1004962 , Carbenes (Methylene compounds) , Heterocyclic compounds , Ligands , Ligands -- Design , Metathesis (Chemistry) , Catalysis
- Description: This study has focused on the design and preparation of bi– and tridentate N–Heterocyclic Carbene (NHC) ligands in order to investigate the effect of a multidentate approach to the formation, stability and catalytic activity of coordination complexes. Chapters 1 – 3 provide background information of relevant catalysis, carbene and coordination chemistry, followed by previous work performed within our research group. In Chapter 4 attention is given to the synthetic aspects of the research conducted, comprising two distinct approaches to the preparation of unsymmetrical saturated and unsaturated NHCs. Firstly, an investigation of the saturated NHC ligands yielded three novel, unsymmetrical pro–ligands, viz., two halopropyl imidazolinium salts and a bidentate hydroxypropyl imidazolinium salt. Secondly, eight imidazolium salts have been generated, including a hydroxypropyl analogue and novel decyl and tridentate malonyl derivatives. These compounds were prepared using microwave–assisted methodology for the alkylation of N– mesitylimidazole – an approach that drastically reduced reaction times (from 8 hours – 7 days to ca. 0.5 – 2 hours) and facilitated isolation of the imidazolium salts. Many of the compounds prepared in this study are novel and were fully characterized using HRMS and 1– and 2–D NMR analysis. Coordination studies using a selection of the prepared pro–ligands afforded an alkoxy–NHC silver derivative and four novel Ru–complexes, viz., Grubbs II–type Ru–complexes containing:– chloropropyl imidazolinylidene; propenyl imidazolylidene; and bidentate alkoxypropyl imidazolylidene ligands. Furthermore, a well–defined benzyl mesitylimidazolylidene Ru–complex has been isolated, which exhibited good stability in air. DFT–level geometry–optimization studies, using the Accelrys DMol3 package have given valuable insights into the likely geometries of the prepared and putative catalysts.
- Full Text:
- Date Issued: 2011