Fluorescence properties of alloyed ZnSeS quantum dots overcoated with ZnTe and ZnTe/ZnS shells
- Adegoke, Oluwasesan, Mashazi, Philani N, Nyokong, Tebello, Forbes, Patricia B C
- Authors: Adegoke, Oluwasesan , Mashazi, Philani N , Nyokong, Tebello , Forbes, Patricia B C
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/240754 , vital:50868 , xlink:href="https://doi.org/10.1016/j.optmat.2016.02.024"
- Description: Fluorescent alloyed ternary ZnSeS quantum dots (QDs) have been synthesized via the pyrolysis of organometallic precursors. The effects of passivation of ZnTe and ZnTe/ZnS shells on the optical properties of the ternary alloyed ZnSeS core have been studied. A ligand exchange reaction using L-cysteine as a capping ligand was used to obtain water-soluble nanocrystals. The nanocrystals were each characterized by UV/vis absorption and fluorescence spectroscopy, transmission electron microscopy, X-ray diffractometry (XRD) and X-ray photoelectron spectroscopy (XPS). The photoluminescence (PL) quantum yield (QY) of alloyed ZnSeS QDs was 14% and this value increased to 27% when ZnTe was overcoated around the surface but further coating with a ZnS shell decreased the PL QY slightly to 24%. This implies that ZnTe shell suppressed non-radiative recombination exciton states in the alloyed core while further layering with a ZnS shell offered no further improvement in suppressing the defect states. XPS analysis confirmed the presence of the first shell layering but showed a weakened intensity signal of S (2p) and Se (3d) for the ZnSeS/ZnTe/ZnS QDs. Our work demonstrates for the first time that shell passivation of alloyed Zn-based QDs can offer improved optical properties. We hope the optical information presented in this work will be useful in the selection of alloyed Zn-based QDs appropriate for the intended application.
- Full Text:
- Date Issued: 2016
- Authors: Adegoke, Oluwasesan , Mashazi, Philani N , Nyokong, Tebello , Forbes, Patricia B C
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/240754 , vital:50868 , xlink:href="https://doi.org/10.1016/j.optmat.2016.02.024"
- Description: Fluorescent alloyed ternary ZnSeS quantum dots (QDs) have been synthesized via the pyrolysis of organometallic precursors. The effects of passivation of ZnTe and ZnTe/ZnS shells on the optical properties of the ternary alloyed ZnSeS core have been studied. A ligand exchange reaction using L-cysteine as a capping ligand was used to obtain water-soluble nanocrystals. The nanocrystals were each characterized by UV/vis absorption and fluorescence spectroscopy, transmission electron microscopy, X-ray diffractometry (XRD) and X-ray photoelectron spectroscopy (XPS). The photoluminescence (PL) quantum yield (QY) of alloyed ZnSeS QDs was 14% and this value increased to 27% when ZnTe was overcoated around the surface but further coating with a ZnS shell decreased the PL QY slightly to 24%. This implies that ZnTe shell suppressed non-radiative recombination exciton states in the alloyed core while further layering with a ZnS shell offered no further improvement in suppressing the defect states. XPS analysis confirmed the presence of the first shell layering but showed a weakened intensity signal of S (2p) and Se (3d) for the ZnSeS/ZnTe/ZnS QDs. Our work demonstrates for the first time that shell passivation of alloyed Zn-based QDs can offer improved optical properties. We hope the optical information presented in this work will be useful in the selection of alloyed Zn-based QDs appropriate for the intended application.
- Full Text:
- Date Issued: 2016
Nanohybrid electrocatalyst based on cobalt phthalocyanine-carbon nanotube-reduced graphene oxide for ultrasensitive detection of glucose in human saliva
- Adeniyi, Omotayo, Nwahara, Nnamdi, Mwanza, Daniel, Nyokong, Tebello, Mashazi, Philani N
- Authors: Adeniyi, Omotayo , Nwahara, Nnamdi , Mwanza, Daniel , Nyokong, Tebello , Mashazi, Philani N
- Date: 2021
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/231356 , vital:49880 , xlink:href="https://doi.org/10.1016/j.snb.2021.130723"
- Description: The current diabetes management systems require collecting blood samples via an invasive and painful finger pricking leading to the formation of callus, scarring and loss of sensibility to patients due to continuous monitoring. Therefore, a non-invasive and painless method of determining glucose levels would be desirable to diabetes patients who need constant monitoring. Saliva glucose measurement is a non-invasive alternative for diabetes management. A highly sensitive, stable, and selective non-enzymatic electrochemical sensor that can accurately quantify saliva glucose is required. A single-walled carbon nanotube/reduced graphene oxide/cobalt phthalocyanines nanohybrid modified glassy carbon electrode (GCE-SWCNT/rGO/CoPc) has been fabricated for the non-enzymatic determination of glucose in human saliva. The SWCNT/rGO/CoPc was characterized using various spectroscopic, microscopic, and electrochemical techniques. The synergistic effect between SWCNT, rGO, and CoPc facilitated excellent electron transfer process that improved the sensor sensitivity. The GCE-SWCNT/rGO/CoPc sensor exhibited two linear responses in the 0.30 μM to 0.50 mM and 0.50–5.0 mM glucose concentration ranges, and the detection limit was 0.12 μM. The sensor had an excellent saliva glucose detection sensitivity of 992.4 μA·mM−1·cm−2 and high specificity for glucose in the presence of other coexisting analytes. In addition, it showed good storage stability, reusability, and a fast response time of about 1.2 s. The GCE-SWCNT/rGO/CoPc nanohybrid electrode showed excellent potential for developing accurate, non-invasive, and painless glucose sensing.
- Full Text:
- Date Issued: 2021
- Authors: Adeniyi, Omotayo , Nwahara, Nnamdi , Mwanza, Daniel , Nyokong, Tebello , Mashazi, Philani N
- Date: 2021
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/231356 , vital:49880 , xlink:href="https://doi.org/10.1016/j.snb.2021.130723"
- Description: The current diabetes management systems require collecting blood samples via an invasive and painful finger pricking leading to the formation of callus, scarring and loss of sensibility to patients due to continuous monitoring. Therefore, a non-invasive and painless method of determining glucose levels would be desirable to diabetes patients who need constant monitoring. Saliva glucose measurement is a non-invasive alternative for diabetes management. A highly sensitive, stable, and selective non-enzymatic electrochemical sensor that can accurately quantify saliva glucose is required. A single-walled carbon nanotube/reduced graphene oxide/cobalt phthalocyanines nanohybrid modified glassy carbon electrode (GCE-SWCNT/rGO/CoPc) has been fabricated for the non-enzymatic determination of glucose in human saliva. The SWCNT/rGO/CoPc was characterized using various spectroscopic, microscopic, and electrochemical techniques. The synergistic effect between SWCNT, rGO, and CoPc facilitated excellent electron transfer process that improved the sensor sensitivity. The GCE-SWCNT/rGO/CoPc sensor exhibited two linear responses in the 0.30 μM to 0.50 mM and 0.50–5.0 mM glucose concentration ranges, and the detection limit was 0.12 μM. The sensor had an excellent saliva glucose detection sensitivity of 992.4 μA·mM−1·cm−2 and high specificity for glucose in the presence of other coexisting analytes. In addition, it showed good storage stability, reusability, and a fast response time of about 1.2 s. The GCE-SWCNT/rGO/CoPc nanohybrid electrode showed excellent potential for developing accurate, non-invasive, and painless glucose sensing.
- Full Text:
- Date Issued: 2021
Fabrication of dye-sensitized solar cells based on push-pull asymmetrical substituted zinc and copper phthalocyanines and reduced graphene oxide nanosheet:
- Chindeka, Francis, Mashazi, Philani N, Britton, Jonathan, Oluwole, David O, Mapukata, Sivuyisiwe, Nyokong, Tebello
- Authors: Chindeka, Francis , Mashazi, Philani N , Britton, Jonathan , Oluwole, David O , Mapukata, Sivuyisiwe , Nyokong, Tebello
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/149076 , vital:38802 , https://doi.org/10.1016/j.jphotochem.2020.112612
- Description: Dye sensitized solar cells (DSSCs) were fabricated by using 2(3,5-biscarboxyphenoxy), 9(10), 16(17), 23(24)-tri(tertbutyl) phthalocyaninato Cu (4) and Zn (5) complexes as dyes on the ITO-TiO2 photoanodes containing reduced graphene oxide nanosheets (rGONS) or nitrogen-doped rGONS (NrGONS). The evaluation of the assembled DSSCs revealed that using ITO-TiO2-NrGONS-CuPc photoanode had the highest fill factor (FF) and power conversion efficiency (ɳ) of 69% and 4.36% respectively. These results show that the asymmetrical phthalocyanine complexes (4) and (5) exhibit significant improvement on the performance of the DSSC compared to our previous work on symmetrical carboxylated phthalocyanines with ɳ = 3.19%.
- Full Text:
- Date Issued: 2020
- Authors: Chindeka, Francis , Mashazi, Philani N , Britton, Jonathan , Oluwole, David O , Mapukata, Sivuyisiwe , Nyokong, Tebello
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/149076 , vital:38802 , https://doi.org/10.1016/j.jphotochem.2020.112612
- Description: Dye sensitized solar cells (DSSCs) were fabricated by using 2(3,5-biscarboxyphenoxy), 9(10), 16(17), 23(24)-tri(tertbutyl) phthalocyaninato Cu (4) and Zn (5) complexes as dyes on the ITO-TiO2 photoanodes containing reduced graphene oxide nanosheets (rGONS) or nitrogen-doped rGONS (NrGONS). The evaluation of the assembled DSSCs revealed that using ITO-TiO2-NrGONS-CuPc photoanode had the highest fill factor (FF) and power conversion efficiency (ɳ) of 69% and 4.36% respectively. These results show that the asymmetrical phthalocyanine complexes (4) and (5) exhibit significant improvement on the performance of the DSSC compared to our previous work on symmetrical carboxylated phthalocyanines with ɳ = 3.19%.
- Full Text:
- Date Issued: 2020
Optimizing phthalocyanine based dye-sensitized solar cells: The role of reduced graphene oxide
- Chindeka, Francis, Mashazi, Philani N, Britton, Jonathan, Fomo, Gertrude, Oluwole, David O, Sindelo, Azole, Nyokong, Tebello
- Authors: Chindeka, Francis , Mashazi, Philani N , Britton, Jonathan , Fomo, Gertrude , Oluwole, David O , Sindelo, Azole , Nyokong, Tebello
- Date: 2018
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/187770 , vital:44695 , xlink:href="https://doi.org/10.1016/j.synthmet.2018.10.021"
- Description: Dye-sensitized solar cells (DSSC) were fabricated by incorporating graphene materials as catalysts at the counter electrode. Platinum was also used as a catalyst for comparison purposes. Different phthalocyanines: hydroxyl indium tetracarboxyphenoxy phthalocyanine (1), chloro indium octacarboxy phthalocyanine (2) and dibenzoic acid silicon phthalocyanine (3) were used as dyes. Complex 3 gave the highest power conversion efficiency (η) of 3.19% when using nitrogen doped reduced graphene oxide nanosheets (NrGONS) as a catalyst at the counter electrode, and TiO2 containing rGONS at the anode. The value is close to 3.8% obtained when using Pt catalyst instead of NrGONS at the cathode, thus confirming that NrGONS is a promising candidate to replace the more expensive Pt. The study also shows that placing rGONS on both the anode and cathode improves efficiency.
- Full Text:
- Date Issued: 2018
- Authors: Chindeka, Francis , Mashazi, Philani N , Britton, Jonathan , Fomo, Gertrude , Oluwole, David O , Sindelo, Azole , Nyokong, Tebello
- Date: 2018
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/187770 , vital:44695 , xlink:href="https://doi.org/10.1016/j.synthmet.2018.10.021"
- Description: Dye-sensitized solar cells (DSSC) were fabricated by incorporating graphene materials as catalysts at the counter electrode. Platinum was also used as a catalyst for comparison purposes. Different phthalocyanines: hydroxyl indium tetracarboxyphenoxy phthalocyanine (1), chloro indium octacarboxy phthalocyanine (2) and dibenzoic acid silicon phthalocyanine (3) were used as dyes. Complex 3 gave the highest power conversion efficiency (η) of 3.19% when using nitrogen doped reduced graphene oxide nanosheets (NrGONS) as a catalyst at the counter electrode, and TiO2 containing rGONS at the anode. The value is close to 3.8% obtained when using Pt catalyst instead of NrGONS at the cathode, thus confirming that NrGONS is a promising candidate to replace the more expensive Pt. The study also shows that placing rGONS on both the anode and cathode improves efficiency.
- Full Text:
- Date Issued: 2018
Effects of differently shaped silver nanoparticles on the photophysics of pyridylsulfanyl-substituted phthalocyanines
- D'Souza, Sarah, Mashazi, Philani N, Britton, Jonathan, Nyokong, Tebello
- Authors: D'Souza, Sarah , Mashazi, Philani N , Britton, Jonathan , Nyokong, Tebello
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/193564 , vital:45348 , xlink:href="https://doi.org/10.1016/j.poly.2015.06.038"
- Description: This paper reports on the photophysical behavior of (2-pyridylsulfanyl)phthalocyaninato zinc(II) and 2,9(10),16(17),23(24)-tetra-(2-pyridylsulfanyl)phthalocyaninato zinc(II) in the presence of differently shaped silver nanoparticles (nanospheres, nanotriangles and nanoflowers). The presence of shaped nanoparticles increased both triplet quantum yields and lifetimes of the tetra-substituted mercaptopyridine zinc phthalocyanine in DMSO. It is apparent from this work that the shape of the silver nanoparticle used is of little consequence in influencing photophysical behavior of the phthalocyanines.
- Full Text:
- Date Issued: 2015
- Authors: D'Souza, Sarah , Mashazi, Philani N , Britton, Jonathan , Nyokong, Tebello
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/193564 , vital:45348 , xlink:href="https://doi.org/10.1016/j.poly.2015.06.038"
- Description: This paper reports on the photophysical behavior of (2-pyridylsulfanyl)phthalocyaninato zinc(II) and 2,9(10),16(17),23(24)-tetra-(2-pyridylsulfanyl)phthalocyaninato zinc(II) in the presence of differently shaped silver nanoparticles (nanospheres, nanotriangles and nanoflowers). The presence of shaped nanoparticles increased both triplet quantum yields and lifetimes of the tetra-substituted mercaptopyridine zinc phthalocyanine in DMSO. It is apparent from this work that the shape of the silver nanoparticle used is of little consequence in influencing photophysical behavior of the phthalocyanines.
- Full Text:
- Date Issued: 2015
Effects of differently shaped silver nanoparticles on the photophysics of pyridylsulfanyl-substituted phthalocyanines
- D’Souza, Sarah, Mashazi, Philani N, Britton, Jonathan, Nyokong, Tebello
- Authors: D’Souza, Sarah , Mashazi, Philani N , Britton, Jonathan , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7290 , http://hdl.handle.net/10962/d1020353
- Description: This paper reports on the photophysical behavior of (2-pyridylsulfanyl)phthalocyaninato zinc(II) and 2,9(10),16(17),23(24)-tetra-(2-pyridylsulfanyl)phthalocyaninato zinc(II) in the presence of differently shaped silver nanoparticles (nanospheres, nanotriangles and nanoflowers). The presence of shaped nanoparticles increased both triplet quantum yields and lifetimes of the tetra-substituted mercaptopyridine zinc phthalocyanine in DMSO. It is apparent from this work that the shape of the silver nanoparticle used is of little consequence in influencing photophysical behavior of the phthalocyanines. , Original publication is available at http://dx.doi.org/10.1016/j.poly.2015.06.038
- Full Text: false
- Authors: D’Souza, Sarah , Mashazi, Philani N , Britton, Jonathan , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7290 , http://hdl.handle.net/10962/d1020353
- Description: This paper reports on the photophysical behavior of (2-pyridylsulfanyl)phthalocyaninato zinc(II) and 2,9(10),16(17),23(24)-tetra-(2-pyridylsulfanyl)phthalocyaninato zinc(II) in the presence of differently shaped silver nanoparticles (nanospheres, nanotriangles and nanoflowers). The presence of shaped nanoparticles increased both triplet quantum yields and lifetimes of the tetra-substituted mercaptopyridine zinc phthalocyanine in DMSO. It is apparent from this work that the shape of the silver nanoparticle used is of little consequence in influencing photophysical behavior of the phthalocyanines. , Original publication is available at http://dx.doi.org/10.1016/j.poly.2015.06.038
- Full Text: false
Critical assessment of the quartz crystal microbalance with dissipation as an analytical tool for biosensor development and fundamental studies
- Fogel, Ronen, Mashazi, Philani N, Nyokong, Tebello, Limson, Janice
- Authors: Fogel, Ronen , Mashazi, Philani N , Nyokong, Tebello , Limson, Janice
- Date: 2007
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/271204 , vital:54521 , xlink:href="https://doi.org/10.1016/j.bios.2007.03.012"
- Description: One of the challenges in electrochemical biosensor design is gaining a fundamental knowledge of the processes underlying immobilisation of the molecules onto the electrode surface. This is of particular importance in biocomposite sensors where concerns have arisen as to the nature of the interaction between the biological and synthetic molecules immobilised. We examined the use of the Quartz Crystal Microbalance with Dissipation (QCM-D) as a tool for fundamental analyses of a model sensor constructed by the immobilisation of cobalt(II) phthalocyanine (TCACoPc) and glucose oxidase (GOx) onto a gold-quartz electrode (electrode surface) for the enhanced detection of glucose. The model sensor was constructed in aqueous phase and covalently linked the gold surface to the TCACoPc, and the TCACoPc to the GOx, using the QCM-D. The aqueous metallophthalocyanine (MPc) formed a multi-layer over the surface of the electrode, which could be removed to leave a monolayer with a mass loading that compared favourably to the theoretical value expected. Analysis of frequency and dissipation plots indicated covalent attachment of glucose oxidase onto the metallophthalocyanine layer. The amount of GOx bound using the model system compared favourably to calculations derived from the maximal amperometric functioning of the electrochemical sensor (examined in previously-published literature, Mashazi, P.N., Ozoemena, K.I., Nyokong, T., 2006. Electrochim. Acta 52, 177–186), but not to theoretical values derived from dimensions of GOx as established by crystallography. The strength of the binding of the GOx film with the TCACoPc layer was tested by using 2% SDS as a denaturant/surfactant, and the GOx film was not found to be significantly affected by exposure to this. This paper thus showed that QCM-D can be used in order to model essential processes and interactions that dictate the functional parameters of a biosensor.
- Full Text:
- Date Issued: 2007
- Authors: Fogel, Ronen , Mashazi, Philani N , Nyokong, Tebello , Limson, Janice
- Date: 2007
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/271204 , vital:54521 , xlink:href="https://doi.org/10.1016/j.bios.2007.03.012"
- Description: One of the challenges in electrochemical biosensor design is gaining a fundamental knowledge of the processes underlying immobilisation of the molecules onto the electrode surface. This is of particular importance in biocomposite sensors where concerns have arisen as to the nature of the interaction between the biological and synthetic molecules immobilised. We examined the use of the Quartz Crystal Microbalance with Dissipation (QCM-D) as a tool for fundamental analyses of a model sensor constructed by the immobilisation of cobalt(II) phthalocyanine (TCACoPc) and glucose oxidase (GOx) onto a gold-quartz electrode (electrode surface) for the enhanced detection of glucose. The model sensor was constructed in aqueous phase and covalently linked the gold surface to the TCACoPc, and the TCACoPc to the GOx, using the QCM-D. The aqueous metallophthalocyanine (MPc) formed a multi-layer over the surface of the electrode, which could be removed to leave a monolayer with a mass loading that compared favourably to the theoretical value expected. Analysis of frequency and dissipation plots indicated covalent attachment of glucose oxidase onto the metallophthalocyanine layer. The amount of GOx bound using the model system compared favourably to calculations derived from the maximal amperometric functioning of the electrochemical sensor (examined in previously-published literature, Mashazi, P.N., Ozoemena, K.I., Nyokong, T., 2006. Electrochim. Acta 52, 177–186), but not to theoretical values derived from dimensions of GOx as established by crystallography. The strength of the binding of the GOx film with the TCACoPc layer was tested by using 2% SDS as a denaturant/surfactant, and the GOx film was not found to be significantly affected by exposure to this. This paper thus showed that QCM-D can be used in order to model essential processes and interactions that dictate the functional parameters of a biosensor.
- Full Text:
- Date Issued: 2007
Synthesis and singlet oxygen production by a phthalocyanine when embedded in asymmetric polymer membranes
- Mafukidze, Donovan M, Mashazi, Philani N, Nyokong, Tebello
- Authors: Mafukidze, Donovan M , Mashazi, Philani N , Nyokong, Tebello
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/188563 , vital:44765 , xlink:href="https://doi.org/10.1016/j.polymer.2016.10.032"
- Description: 2(3), 9(10), 16(17), 23(24)-Tetrakis-(4-aminophenoxy) phthalocyaninato indium (III) chloride (ClInTAPPc, 3) was first conjugated to two different polymers: polystyrene (PS) and polyacrylonitrile (PAN) to form 3-PS and 3-PAN. The conjugates were cast into the corresponding polymers to form membranes represented as 3-PS-membrane and 3-PAN-membrane, respectively. The prepared membranes were characterized using various techniques including scanning electron microscopy and solid state UV/Vis spectroscopy. Singlet oxygen quantum yields were higher for the 3-PS-membrane at 0.51 compared to 3-PAN-membrane at 0.35. The larger singlet oxygen also applies to 3-PS (0.63) compared to 3-PAN (0.38) when in solution.
- Full Text:
- Date Issued: 2016
- Authors: Mafukidze, Donovan M , Mashazi, Philani N , Nyokong, Tebello
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/188563 , vital:44765 , xlink:href="https://doi.org/10.1016/j.polymer.2016.10.032"
- Description: 2(3), 9(10), 16(17), 23(24)-Tetrakis-(4-aminophenoxy) phthalocyaninato indium (III) chloride (ClInTAPPc, 3) was first conjugated to two different polymers: polystyrene (PS) and polyacrylonitrile (PAN) to form 3-PS and 3-PAN. The conjugates were cast into the corresponding polymers to form membranes represented as 3-PS-membrane and 3-PAN-membrane, respectively. The prepared membranes were characterized using various techniques including scanning electron microscopy and solid state UV/Vis spectroscopy. Singlet oxygen quantum yields were higher for the 3-PS-membrane at 0.51 compared to 3-PAN-membrane at 0.35. The larger singlet oxygen also applies to 3-PS (0.63) compared to 3-PAN (0.38) when in solution.
- Full Text:
- Date Issued: 2016
Electrocatalytic behaviour of surface confined pentanethio cobalt (II) binuclear phthalocyanines towards the oxidation of 4-chlorophenol
- Makinde, Zainab O, Louzada, Marcel, Mashazi, Philani N, Nyokong, Tebello, Khene, Samson M
- Authors: Makinde, Zainab O , Louzada, Marcel , Mashazi, Philani N , Nyokong, Tebello , Khene, Samson M
- Date: 2017
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/188138 , vital:44726 , xlink:href="https://doi.org/10.1016/j.apsusc.2017.06.271"
- Description: Cobalt binuclear phthalocyanine (CoBiPc) bearing pentanethio substituents at the peripheral positions were synthesized. The immobilization of the synthesized cobalt phthalocyanines on gold electrode was achieved using self-assembled monolayer method (SAM). X-ray photoelectron spectroscopy (XPS) and Kelvin Probe (KP) techniques were used to characterise the formation of monomeric and binuclear phthalocyanine SAMs on the gold surface. The phthalocyanine SAMs on gold electrodes were investigated for electrocatalytic oxidation of 4-chlorophenol. The electrocatalytic properties of tetra- and octa- pentanethio substituted cobalt binuclear phthalocyanine (CoBiPc) are compared with their tetra- and octa-pentanethio substituted phthalocyanine (CoPc). The SAMs modified gold electrode surfaces showed a peak current enhancement and stability and reduction in electrocatalytic potentials compared to the bare or unmodified electrodes towards the detection of the 4-chlorophenol. The SAMs of cobalt binuclear phthalocyanines exhibited more enhanced electrocatalytic properties in terms of stability, detection peak current and reduction of the electrocatalytic over potential.
- Full Text:
- Date Issued: 2017
- Authors: Makinde, Zainab O , Louzada, Marcel , Mashazi, Philani N , Nyokong, Tebello , Khene, Samson M
- Date: 2017
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/188138 , vital:44726 , xlink:href="https://doi.org/10.1016/j.apsusc.2017.06.271"
- Description: Cobalt binuclear phthalocyanine (CoBiPc) bearing pentanethio substituents at the peripheral positions were synthesized. The immobilization of the synthesized cobalt phthalocyanines on gold electrode was achieved using self-assembled monolayer method (SAM). X-ray photoelectron spectroscopy (XPS) and Kelvin Probe (KP) techniques were used to characterise the formation of monomeric and binuclear phthalocyanine SAMs on the gold surface. The phthalocyanine SAMs on gold electrodes were investigated for electrocatalytic oxidation of 4-chlorophenol. The electrocatalytic properties of tetra- and octa- pentanethio substituted cobalt binuclear phthalocyanine (CoBiPc) are compared with their tetra- and octa-pentanethio substituted phthalocyanine (CoPc). The SAMs modified gold electrode surfaces showed a peak current enhancement and stability and reduction in electrocatalytic potentials compared to the bare or unmodified electrodes towards the detection of the 4-chlorophenol. The SAMs of cobalt binuclear phthalocyanines exhibited more enhanced electrocatalytic properties in terms of stability, detection peak current and reduction of the electrocatalytic over potential.
- Full Text:
- Date Issued: 2017
Characterization of electrodes modified by one pot or step by step electro-click reaction and axial ligation of iron tetracarboxyphthalocyanine
- Maringa, Audacity, Mashazi, Philani N, Nyokong, Tebello
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/193892 , vital:45403 , xlink:href="https://doi.org/10.1016/j.electacta.2014.09.011"
- Description: The modification of the glassy carbon electrode (GCE) was carried out using two methods. The first method is simultaneous electropolymerization and electro-click followed by immersion into a solution of dimethyl formamide (DMF) containing FeTCPc. The second method is step by step whereby electropolymerization is carried out first followed by electro-click and then immersion into a DMF solution containing FeTCPc. From the electrochemical characterization, it was observed that the second route (step by step method) was the best as indicated by the ferricyanide studies (cyclic voltammetry and scanning electrochemical microscopy). In the electrooxidation of hydrazine, we obtained a potential of 0.26 V. Of interest were the detection limit of 6.4 μM and the catalytic rate constant of 2.1 × 109 cm3 mol−1 s−1. This shows that the sensor can be used for the electrooxidation of hydrazine.
- Full Text:
- Date Issued: 2014
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/193892 , vital:45403 , xlink:href="https://doi.org/10.1016/j.electacta.2014.09.011"
- Description: The modification of the glassy carbon electrode (GCE) was carried out using two methods. The first method is simultaneous electropolymerization and electro-click followed by immersion into a solution of dimethyl formamide (DMF) containing FeTCPc. The second method is step by step whereby electropolymerization is carried out first followed by electro-click and then immersion into a DMF solution containing FeTCPc. From the electrochemical characterization, it was observed that the second route (step by step method) was the best as indicated by the ferricyanide studies (cyclic voltammetry and scanning electrochemical microscopy). In the electrooxidation of hydrazine, we obtained a potential of 0.26 V. Of interest were the detection limit of 6.4 μM and the catalytic rate constant of 2.1 × 109 cm3 mol−1 s−1. This shows that the sensor can be used for the electrooxidation of hydrazine.
- Full Text:
- Date Issued: 2014
Electrocatalytic activity of bimetallic Au–Pd nanoparticles in the presence of cobalt tetraaminophthalocyanine
- Maringa, Audacity, Mashazi, Philani N, Nyokong, Tebello
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189719 , vital:44925 , xlink:href="https://doi.org/10.1016/j.jcis.2014.10.056"
- Description: Au and Pd nanoparticles were individually or together electrodeposited on top of polymerized cobalt tetraaminophthalocyanine (poly-CoTAPc). When Pd and Au nanoparticles are co-deposited together, the electrode is denoted as Au–Pd (co-deposited)/poly-CoTAPc-GCE. X-ray photoelectron spectroscopy (XPS) was used to show the successful deposition of AuNPs, PdNPs and Au–Pd (co-deposited). The scanning electrochemical microscopy showed that Au–Pd (co-deposited)/poly-CoTAPc-GCE (with current range of 9.5–13.5 lA) was more conducting than Au–Pd (co-deposited)-GCE (with current range of 8–12 lA). Electrochemical impedance spectroscopy (EIS) showed that there was less resistance to charge transfer for Au–Pd (co-deposited)/poly-CoTAPc-GCE compared to the rest of the electrodes. Au–Pd (co-deposited)/poly-CoTAPc-GCE showed the best activity for the electrooxidation of hydrazine in terms of limit of detection (0.5 lM), hence shows promise as an electrocatalyst for electrooxidation of hydrazine.
- Full Text:
- Date Issued: 2015
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189719 , vital:44925 , xlink:href="https://doi.org/10.1016/j.jcis.2014.10.056"
- Description: Au and Pd nanoparticles were individually or together electrodeposited on top of polymerized cobalt tetraaminophthalocyanine (poly-CoTAPc). When Pd and Au nanoparticles are co-deposited together, the electrode is denoted as Au–Pd (co-deposited)/poly-CoTAPc-GCE. X-ray photoelectron spectroscopy (XPS) was used to show the successful deposition of AuNPs, PdNPs and Au–Pd (co-deposited). The scanning electrochemical microscopy showed that Au–Pd (co-deposited)/poly-CoTAPc-GCE (with current range of 9.5–13.5 lA) was more conducting than Au–Pd (co-deposited)-GCE (with current range of 8–12 lA). Electrochemical impedance spectroscopy (EIS) showed that there was less resistance to charge transfer for Au–Pd (co-deposited)/poly-CoTAPc-GCE compared to the rest of the electrodes. Au–Pd (co-deposited)/poly-CoTAPc-GCE showed the best activity for the electrooxidation of hydrazine in terms of limit of detection (0.5 lM), hence shows promise as an electrocatalyst for electrooxidation of hydrazine.
- Full Text:
- Date Issued: 2015
Characterization of electrodes modified by one pot or step by step electro-click reaction and axial ligation of iron tetracarboxyphthalocyanine
- Maringa, Audacity, Mashazi, Philani N, Nyokong, Tebello
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7307 , http://hdl.handle.net/10962/d1020384
- Description: The modification of the glassy carbon electrode (GCE) was carried out using two methods. The first method is simultaneous electropolymerization and electro-click followed by immersion into a solution of dimethyl formamide (DMF) containing FeTCPc. The second method is step by step whereby electropolymerization is carried out first followed by electro-click and then immersion into a DMF solution containing FeTCPc. From the electrochemical characterization, it was observed that the second route (step by step method) was the best as indicated by the ferricyanide studies (cyclic voltammetry and scanning electrochemical microscopy). In the electrooxidation of hydrazine, we obtained a potential of 0.26 V. Of interest were the detection limit of 6.4 μM and the catalytic rate constant of 2.1 × 109 cm3 mol−1 s−1. This shows that the sensor can be used for the electrooxidation of hydrazine. , Original publication is available at http://dx.doi.org/10.1016/j.electacta.2014.09.011
- Full Text: false
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7307 , http://hdl.handle.net/10962/d1020384
- Description: The modification of the glassy carbon electrode (GCE) was carried out using two methods. The first method is simultaneous electropolymerization and electro-click followed by immersion into a solution of dimethyl formamide (DMF) containing FeTCPc. The second method is step by step whereby electropolymerization is carried out first followed by electro-click and then immersion into a DMF solution containing FeTCPc. From the electrochemical characterization, it was observed that the second route (step by step method) was the best as indicated by the ferricyanide studies (cyclic voltammetry and scanning electrochemical microscopy). In the electrooxidation of hydrazine, we obtained a potential of 0.26 V. Of interest were the detection limit of 6.4 μM and the catalytic rate constant of 2.1 × 109 cm3 mol−1 s−1. This shows that the sensor can be used for the electrooxidation of hydrazine. , Original publication is available at http://dx.doi.org/10.1016/j.electacta.2014.09.011
- Full Text: false
Electrocatalytic activity of bimetallic Au–Pd nanoparticles in the presence of cobalt tetraaminophthalocyanine
- Maringa, Audacity, Mashazi, Philani N, Nyokong, Tebello
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7245 , http://hdl.handle.net/10962/d1020250
- Description: Au and Pd nanoparticles were individually or together electrodeposited on top of polymerized cobalt tetraaminophthalocyanine (poly-CoTAPc). When Pd and Au nanoparticles are co-deposited together, the electrode is denoted as Au–Pd (co-deposited)/poly-CoTAPc-GCE. X-ray photoelectron spectroscopy (XPS) was used to show the successful deposition of AuNPs, PdNPs and Au–Pd (co-deposited). The scanning electrochemical microscopy showed that Au–Pd (co-deposited)/poly-CoTAPc-GCE (with current range of 9.5–13.5 μA) was more conducting than Au–Pd (co-deposited)-GCE (with current range of 8–12 μA). Electrochemical impedance spectroscopy (EIS) showed that there was less resistance to charge transfer for Au–Pd (co-deposited)/poly-CoTAPc-GCE compared to the rest of the electrodes. Au–Pd (co-deposited)/poly-CoTAPc-GCE showed the best activity for the electrooxidation of hydrazine in terms of limit of detection (0.5 μM), hence shows promise as an electrocatalyst for electrooxidation of hydrazine. , Original publication is available at http://dx.doi.org/10.1016/j.jcis.2014.10.056
- Full Text: false
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7245 , http://hdl.handle.net/10962/d1020250
- Description: Au and Pd nanoparticles were individually or together electrodeposited on top of polymerized cobalt tetraaminophthalocyanine (poly-CoTAPc). When Pd and Au nanoparticles are co-deposited together, the electrode is denoted as Au–Pd (co-deposited)/poly-CoTAPc-GCE. X-ray photoelectron spectroscopy (XPS) was used to show the successful deposition of AuNPs, PdNPs and Au–Pd (co-deposited). The scanning electrochemical microscopy showed that Au–Pd (co-deposited)/poly-CoTAPc-GCE (with current range of 9.5–13.5 μA) was more conducting than Au–Pd (co-deposited)-GCE (with current range of 8–12 μA). Electrochemical impedance spectroscopy (EIS) showed that there was less resistance to charge transfer for Au–Pd (co-deposited)/poly-CoTAPc-GCE compared to the rest of the electrodes. Au–Pd (co-deposited)/poly-CoTAPc-GCE showed the best activity for the electrooxidation of hydrazine in terms of limit of detection (0.5 μM), hence shows promise as an electrocatalyst for electrooxidation of hydrazine. , Original publication is available at http://dx.doi.org/10.1016/j.jcis.2014.10.056
- Full Text: false
Applications of polymerized metal tetra-amino phthalocyanines towards hydrogen peroxide detection
- Mashazi, Philani N, Togo, Chumunorwa, Limson, Janice, Nyokong, Tebello
- Authors: Mashazi, Philani N , Togo, Chumunorwa , Limson, Janice , Nyokong, Tebello
- Date: 2010
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/261840 , vital:53451 , xlink:href="https://doi.org/10.1142/S1088424610001994"
- Description: This work reports the use of metallo tetra-amino phthalocyanines (MTAPc, M = Co and Mn) polymer thin films on gold and glassy carbon electrode surfaces for the detection and monitoring of hydrogen peroxide (H2O2). The polymer-modified electrodes were characterized using electrochemical and microscopic-based methods. Atomic force microscopy (AFM) was used to study the bare and polymer-modified ITO surfaces. The electrocatalytic reduction of H2O2 with glassy carbon polymer-modified electrodes gave higher current densities compared to their gold counterparts. The electroanalytical properties of H2O2 were obtained using a real-time calibration curve of the amperometric determination in pH 7.4 aqueous solution. The limits of detection (LoD) of the polymer-modified electrodes towards electroreduction of H2O2 were of the order of 10–7 M, with high sensitivity ranging from 6.0–15.4 mA.mM-1.cm-2.
- Full Text:
- Date Issued: 2010
- Authors: Mashazi, Philani N , Togo, Chumunorwa , Limson, Janice , Nyokong, Tebello
- Date: 2010
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/261840 , vital:53451 , xlink:href="https://doi.org/10.1142/S1088424610001994"
- Description: This work reports the use of metallo tetra-amino phthalocyanines (MTAPc, M = Co and Mn) polymer thin films on gold and glassy carbon electrode surfaces for the detection and monitoring of hydrogen peroxide (H2O2). The polymer-modified electrodes were characterized using electrochemical and microscopic-based methods. Atomic force microscopy (AFM) was used to study the bare and polymer-modified ITO surfaces. The electrocatalytic reduction of H2O2 with glassy carbon polymer-modified electrodes gave higher current densities compared to their gold counterparts. The electroanalytical properties of H2O2 were obtained using a real-time calibration curve of the amperometric determination in pH 7.4 aqueous solution. The limits of detection (LoD) of the polymer-modified electrodes towards electroreduction of H2O2 were of the order of 10–7 M, with high sensitivity ranging from 6.0–15.4 mA.mM-1.cm-2.
- Full Text:
- Date Issued: 2010
Design and evaluation of an electrochemical immunosensor for measles serodiagnosis using measles-specific Immunoglobulin G antibodies
- Mashazi, Philani N, Vilakazi, Sibulelo, Nyokong, Tebello
- Authors: Mashazi, Philani N , Vilakazi, Sibulelo , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241705 , vital:50962 , xlink:href="https://doi.org/10.1016/j.talanta.2013.06.036"
- Description: The design of electrochemical immunosensors for the detection of measles-specific antibodies is reported. The measles-antigen modified surface was used as an antibody capture surface. The detection of measles-specific IgG antibodies was accomplished using the voltammetric method and horse-radish peroxidase (HRP) labeled secondary antibody (anti-IgG) as a detecting antibody. The potential applications of the designed immunosensor were evaluated in buffer and serum solutions. The immunosensor exhibited good linearity at concentrations less than 100 ng mL−1 with R2=0.997 and the limit of detection of 6.60 ng mL−1 at 3σ. The potential application of the immunosensor was evaluated in the deliberately infected human and newborn calf serum samples with measles-IgG antibody mimicking real-life samples. The designed electrochemical immunosensor could differentiate between infected and un-infected serum samples as higher catalytic currents were obtained for infected serum samples.
- Full Text:
- Date Issued: 2013
- Authors: Mashazi, Philani N , Vilakazi, Sibulelo , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241705 , vital:50962 , xlink:href="https://doi.org/10.1016/j.talanta.2013.06.036"
- Description: The design of electrochemical immunosensors for the detection of measles-specific antibodies is reported. The measles-antigen modified surface was used as an antibody capture surface. The detection of measles-specific IgG antibodies was accomplished using the voltammetric method and horse-radish peroxidase (HRP) labeled secondary antibody (anti-IgG) as a detecting antibody. The potential applications of the designed immunosensor were evaluated in buffer and serum solutions. The immunosensor exhibited good linearity at concentrations less than 100 ng mL−1 with R2=0.997 and the limit of detection of 6.60 ng mL−1 at 3σ. The potential application of the immunosensor was evaluated in the deliberately infected human and newborn calf serum samples with measles-IgG antibody mimicking real-life samples. The designed electrochemical immunosensor could differentiate between infected and un-infected serum samples as higher catalytic currents were obtained for infected serum samples.
- Full Text:
- Date Issued: 2013
The effects of carbon nanotubes on the electrocatalysis of hydrogen peroxide by metallo-phthalocyanines
- Mashazi, Philani N, Mugadza, Tawanda, Sosibo, Ndabenhle, Mdluli, Phumlani, Vilakazi, Sibulelo, Nyokong, Tebello
- Authors: Mashazi, Philani N , Mugadza, Tawanda , Sosibo, Ndabenhle , Mdluli, Phumlani , Vilakazi, Sibulelo , Nyokong, Tebello
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247174 , vital:51553 , xlink:href="https://doi.org/10.1016/j.talanta.2011.07.069"
- Description: The pre-grafted screen-printed gold electrode modified with phenyl-amino monolayer was investigated for covalent immobilization of phenyl-amine functionalized single-walled carbon nanotubes (PA-SWCNT) and metal tetra-amino phthalocyanine (MTAPc) using Schiff-base reactions with benzene-1,4-dicarbaldehyde (BDCA) as cross-linker. The PA-SWCNT and MTAPc modified electrodes were applied as hybrids for electrochemical sensing of H2O2. The step-by-step fabrication of the electrode was followed using electrochemistry, impedance spectroscopy, scanning electron microscopy and Raman spectroscopy and all these techniques confirmed the fabrication and the immobilization of PA-SWCNT, MnTAPc and CoTAPc onto gold surfaces. The apparent electron transfer constant (kapp) showed that the carbon nanotubes and metallo-phthalocyanines hybrids possess good electron transfer properties compared to the bare, pre-grafted and the MTAPc modified gold electrode surfaces without PA-SWCNT. The electrochemical sensing of hydrogen peroxide was successful with PA-SWCNT–MTAPc hybrid systems showing higher electrocatalytic currents compared to the other electrodes. The analytical parameters obtained using chronoamperometry gave good linearity at H2O2 concentrations ranging from 1.0 to 30.0 μmol L−1. The values for the limit of detection (LoD) were found to be of the orders of 10−7 M using the 3δ for all the electrodes. The PA-SWCNT–MTAPc modified SPAuEs were much more sensitive compared to PA–MTAPc modified SPAuEs.
- Full Text:
- Date Issued: 2011
- Authors: Mashazi, Philani N , Mugadza, Tawanda , Sosibo, Ndabenhle , Mdluli, Phumlani , Vilakazi, Sibulelo , Nyokong, Tebello
- Date: 2011
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/247174 , vital:51553 , xlink:href="https://doi.org/10.1016/j.talanta.2011.07.069"
- Description: The pre-grafted screen-printed gold electrode modified with phenyl-amino monolayer was investigated for covalent immobilization of phenyl-amine functionalized single-walled carbon nanotubes (PA-SWCNT) and metal tetra-amino phthalocyanine (MTAPc) using Schiff-base reactions with benzene-1,4-dicarbaldehyde (BDCA) as cross-linker. The PA-SWCNT and MTAPc modified electrodes were applied as hybrids for electrochemical sensing of H2O2. The step-by-step fabrication of the electrode was followed using electrochemistry, impedance spectroscopy, scanning electron microscopy and Raman spectroscopy and all these techniques confirmed the fabrication and the immobilization of PA-SWCNT, MnTAPc and CoTAPc onto gold surfaces. The apparent electron transfer constant (kapp) showed that the carbon nanotubes and metallo-phthalocyanines hybrids possess good electron transfer properties compared to the bare, pre-grafted and the MTAPc modified gold electrode surfaces without PA-SWCNT. The electrochemical sensing of hydrogen peroxide was successful with PA-SWCNT–MTAPc hybrid systems showing higher electrocatalytic currents compared to the other electrodes. The analytical parameters obtained using chronoamperometry gave good linearity at H2O2 concentrations ranging from 1.0 to 30.0 μmol L−1. The values for the limit of detection (LoD) were found to be of the orders of 10−7 M using the 3δ for all the electrodes. The PA-SWCNT–MTAPc modified SPAuEs were much more sensitive compared to PA–MTAPc modified SPAuEs.
- Full Text:
- Date Issued: 2011
Probing electrochemical and electrocatalytic properties of cobalt (II) and manganese (III) octakis (hexylthio) phthalocyanine as self-assembled monolayers
- Mashazi, Philani N, Antunes, Edith M, Nyokong, Tebello
- Authors: Mashazi, Philani N , Antunes, Edith M , Nyokong, Tebello
- Date: 2010
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/249115 , vital:51779 , xlink:href="https://doi.org/10.1142/S108842461000277X"
- Description: New peripherally (β) and non-peripherally (α) substituted metal octakis(hexylthio)phthalocyanines (β- and α-MOcHexTPc) containing cobalt and manganese as metal centers were synthesized. Their characterization using electrochemical methods showed that these complexes exhibit several redox processes at E1/2 (mV vs. Ag∣AgCl) = 380 (212) (I), 1140 (864) (II), -450 (-460) (III) and -1170 (-1304) (IV) for β- (α-) CoOcHexTPc. These redox processes were assigned to CoIIIPc-2/CoIIPc-2 (I), CoIIIPc-1/CoIIIPc-2 (II), CoIIPc-2/CoIPc-2 (III) and CoIPc-2/CoIPc-3 (IV) using spectroelectrochemistry. For the β- (α-) MnOcHexTPc complex the redox processes were observed at E1/2 (mV vs. Ag∣AgCl) = -20 (5) (I), -530 (-640) (II) and -1270 (-1380) (III) and were assigned to MnIIIPc-2/MnIIPc-2 (I), MnIIPc-2/MnIIPc-3 (II) and MnIIPc-3/MnIIPc-4 (III). Electrochemical and microscopic characterization using AFM showed that the self-assembled monolayers (SAMs) are formed on the gold surface using these complexes. The electrochemical characterization showed the blocking of the Faradaic processes at SAMs modified electrodes and these reactions are well-known to easily occur at unmodified gold electrodes. The AFM characterization showed an increase in surface roughness upon modifying the gold surface with MOcHexTPc SAMs, further confirming the presence of the monolayers on the gold surface. The MOcHexTPc SAMs were investigated for their electrocatalytic application towards H2O2 detection. The MOcHexTPc SAMs modified gold electrodes gave excellent currents for H2O2 detection. The observed H2O2 electrocatalytic reduction peaks were close to where the metal redox processes from the MOcHexTPc occurred, showing the involvement of the metal redox processes in the electrocatalytic mediation reactions.
- Full Text:
- Date Issued: 2010
- Authors: Mashazi, Philani N , Antunes, Edith M , Nyokong, Tebello
- Date: 2010
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/249115 , vital:51779 , xlink:href="https://doi.org/10.1142/S108842461000277X"
- Description: New peripherally (β) and non-peripherally (α) substituted metal octakis(hexylthio)phthalocyanines (β- and α-MOcHexTPc) containing cobalt and manganese as metal centers were synthesized. Their characterization using electrochemical methods showed that these complexes exhibit several redox processes at E1/2 (mV vs. Ag∣AgCl) = 380 (212) (I), 1140 (864) (II), -450 (-460) (III) and -1170 (-1304) (IV) for β- (α-) CoOcHexTPc. These redox processes were assigned to CoIIIPc-2/CoIIPc-2 (I), CoIIIPc-1/CoIIIPc-2 (II), CoIIPc-2/CoIPc-2 (III) and CoIPc-2/CoIPc-3 (IV) using spectroelectrochemistry. For the β- (α-) MnOcHexTPc complex the redox processes were observed at E1/2 (mV vs. Ag∣AgCl) = -20 (5) (I), -530 (-640) (II) and -1270 (-1380) (III) and were assigned to MnIIIPc-2/MnIIPc-2 (I), MnIIPc-2/MnIIPc-3 (II) and MnIIPc-3/MnIIPc-4 (III). Electrochemical and microscopic characterization using AFM showed that the self-assembled monolayers (SAMs) are formed on the gold surface using these complexes. The electrochemical characterization showed the blocking of the Faradaic processes at SAMs modified electrodes and these reactions are well-known to easily occur at unmodified gold electrodes. The AFM characterization showed an increase in surface roughness upon modifying the gold surface with MOcHexTPc SAMs, further confirming the presence of the monolayers on the gold surface. The MOcHexTPc SAMs were investigated for their electrocatalytic application towards H2O2 detection. The MOcHexTPc SAMs modified gold electrodes gave excellent currents for H2O2 detection. The observed H2O2 electrocatalytic reduction peaks were close to where the metal redox processes from the MOcHexTPc occurred, showing the involvement of the metal redox processes in the electrocatalytic mediation reactions.
- Full Text:
- Date Issued: 2010
Electrochemical impedimetric immunosensor for the detection of measles-specific IgG antibodies after measles infections
- Mashazi, Philani N, Tetyana, Phumlani, Vilakazi, Sibulelo, Nyokong, Tebello
- Authors: Mashazi, Philani N , Tetyana, Phumlani , Vilakazi, Sibulelo , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241677 , vital:50960 , xlink:href="https://doi.org/10.1016/j.bios.2013.04.028"
- Description: The detection of measles-specific primary antibodies (IgG) using electrochemical impedimetric immunosensors is reported. The optimum conditions for electrode saturation were reached after 40 min for 1 μg ml−1 antibody concentrations. Surface roughness using AFM increased with each immobilization or antigen-antibody reaction step clearly confirming the surface modification and recognition between antigen and antibody. The human serum (HS) and new-born calf serum (NCS) spiked with antigen-specific antibody were studied to mimic the real sample analysis. The HS and NCS sera containing antibodies due to measles exhibited correlation between the increasing antibody serum concentrations and the charge-transfer resistance (electrochemically measured). This work clearly showed the potential use of impedance as the preferred electrochemical method for detecting measles-antibodies in label-free manner.
- Full Text:
- Date Issued: 2013
- Authors: Mashazi, Philani N , Tetyana, Phumlani , Vilakazi, Sibulelo , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241677 , vital:50960 , xlink:href="https://doi.org/10.1016/j.bios.2013.04.028"
- Description: The detection of measles-specific primary antibodies (IgG) using electrochemical impedimetric immunosensors is reported. The optimum conditions for electrode saturation were reached after 40 min for 1 μg ml−1 antibody concentrations. Surface roughness using AFM increased with each immobilization or antigen-antibody reaction step clearly confirming the surface modification and recognition between antigen and antibody. The human serum (HS) and new-born calf serum (NCS) spiked with antigen-specific antibody were studied to mimic the real sample analysis. The HS and NCS sera containing antibodies due to measles exhibited correlation between the increasing antibody serum concentrations and the charge-transfer resistance (electrochemically measured). This work clearly showed the potential use of impedance as the preferred electrochemical method for detecting measles-antibodies in label-free manner.
- Full Text:
- Date Issued: 2013
Surface chemistry and electrocatalytic behaviour of tetra-carboxy substituted iron, cobalt and manganese phthalocyanine monolayers on gold electrode
- Mashazi, Philani N, Westbroek, Philippe, Ozoemena, Kenneth I, Nyokong, Tebello
- Authors: Mashazi, Philani N , Westbroek, Philippe , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2007
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/268806 , vital:54233 , xlink:href="https://doi.org/10.1016/j.electacta.2007.08.044"
- Description: Surface chemistry and electrocatalytic properties of self-assembled monolayers of metal tetra-carboxylic acid phthalocyanine complexes with cobalt (Co), iron (Fe) and manganese (Mn) as central metal ions have been studied. These phthalocyanine molecules are immobilized on gold electrode via the coupling reaction between the ring substituents and pre-formed mercaptoethanol self-assembled monolayer (Au-ME SAM). X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed chemisorption of mercaptoethanol via sulfur group on gold electrode and also coupling reaction between phthalocyanines and Au-ME SAM. Electrochemical parameters of the immobilized molecules show that these molecules are densely packed with a perpendicular orientation. The potential applications of the gold modified electrodes were investigated towards L-cysteine detection and the analysis at phthalocyanine SAMs. Cobalt and iron tetra-carboxylic acid phthalocyanine monolayers showed good oxidation peak for L-cysteine at potentials where metal oxidation (MIII/MII) takes place and this metal oxidation mediates the catalytic oxidation of L-cysteine. Manganese tetra-carboxylic acid phthalocyanine monolayer also exhibited a good catalytic oxidation peak towards L-cysteine at potentials where MnIV/MnIII redox peak occurs and this redox peak mediates L-cysteine oxidation. The analysis of cysteine at phthalocyanine monolayers displayed good analytical parameters with good detection limits of the orders of 10−7 mol L−1 and good linearity for a studied concentration range up to 60 μmol L−1.
- Full Text:
- Date Issued: 2007
- Authors: Mashazi, Philani N , Westbroek, Philippe , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2007
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/268806 , vital:54233 , xlink:href="https://doi.org/10.1016/j.electacta.2007.08.044"
- Description: Surface chemistry and electrocatalytic properties of self-assembled monolayers of metal tetra-carboxylic acid phthalocyanine complexes with cobalt (Co), iron (Fe) and manganese (Mn) as central metal ions have been studied. These phthalocyanine molecules are immobilized on gold electrode via the coupling reaction between the ring substituents and pre-formed mercaptoethanol self-assembled monolayer (Au-ME SAM). X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed chemisorption of mercaptoethanol via sulfur group on gold electrode and also coupling reaction between phthalocyanines and Au-ME SAM. Electrochemical parameters of the immobilized molecules show that these molecules are densely packed with a perpendicular orientation. The potential applications of the gold modified electrodes were investigated towards L-cysteine detection and the analysis at phthalocyanine SAMs. Cobalt and iron tetra-carboxylic acid phthalocyanine monolayers showed good oxidation peak for L-cysteine at potentials where metal oxidation (MIII/MII) takes place and this metal oxidation mediates the catalytic oxidation of L-cysteine. Manganese tetra-carboxylic acid phthalocyanine monolayer also exhibited a good catalytic oxidation peak towards L-cysteine at potentials where MnIV/MnIII redox peak occurs and this redox peak mediates L-cysteine oxidation. The analysis of cysteine at phthalocyanine monolayers displayed good analytical parameters with good detection limits of the orders of 10−7 mol L−1 and good linearity for a studied concentration range up to 60 μmol L−1.
- Full Text:
- Date Issued: 2007
Self-assembled monolayers (SAMs) of cobalt tetracarboxylic acidchloride phthalocyanine covalently attached onto a preformed mercaptoethanol SAM
- Mashazi, Philani N, Ozoemena, Kenneth I, Maree, David M, Nyokong, Tebello
- Authors: Mashazi, Philani N , Ozoemena, Kenneth I , Maree, David M , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/283792 , vital:55989 , xlink:href="https://doi.org/10.1016/j.electacta.2005.10.004"
- Description: A feasible method of fabricating phthalocyanine sensor was developed by covalent attachment of cobalt tetracarboxylic acidchloride phthalocyanine (CoTCACIPc) onto a preformed 2-mercaptoethanol (2-ME) self-assembled monolayer (SAM) modified gold electrode (designated as CoTCACIPc-2-ME-SAM). The surface concentration of the CoTCACIPc was found to be 4.58 × 10−10 mol/cm2. The sensor gave a linear response to L-cysteine over the concentration range 0.28–20 μM with a detection limit of 5 × 10−7 M and best response time of 2 s.
- Full Text:
- Date Issued: 2006
- Authors: Mashazi, Philani N , Ozoemena, Kenneth I , Maree, David M , Nyokong, Tebello
- Date: 2006
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/283792 , vital:55989 , xlink:href="https://doi.org/10.1016/j.electacta.2005.10.004"
- Description: A feasible method of fabricating phthalocyanine sensor was developed by covalent attachment of cobalt tetracarboxylic acidchloride phthalocyanine (CoTCACIPc) onto a preformed 2-mercaptoethanol (2-ME) self-assembled monolayer (SAM) modified gold electrode (designated as CoTCACIPc-2-ME-SAM). The surface concentration of the CoTCACIPc was found to be 4.58 × 10−10 mol/cm2. The sensor gave a linear response to L-cysteine over the concentration range 0.28–20 μM with a detection limit of 5 × 10−7 M and best response time of 2 s.
- Full Text:
- Date Issued: 2006