Visit the COVID-19 Corona Virus South African Resource Portal on https://sacoronavirus.co.za/
Fabrication of dye-sensitized solar cells based on push-pull asymmetrical substituted zinc and copper phthalocyanines and reduced graphene oxide nanosheet:
- Chindeka, Francis, Mashazi, Philani N, Britton, Jonathan, Oluwole, David O, Mapukata, Sivuyisiwe, Nyokong, Tebello
- Authors: Chindeka, Francis , Mashazi, Philani N , Britton, Jonathan , Oluwole, David O , Mapukata, Sivuyisiwe , Nyokong, Tebello
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/149076 , vital:38802 , https://doi.org/10.1016/j.jphotochem.2020.112612
- Description: Dye sensitized solar cells (DSSCs) were fabricated by using 2(3,5-biscarboxyphenoxy), 9(10), 16(17), 23(24)-tri(tertbutyl) phthalocyaninato Cu (4) and Zn (5) complexes as dyes on the ITO-TiO2 photoanodes containing reduced graphene oxide nanosheets (rGONS) or nitrogen-doped rGONS (NrGONS). The evaluation of the assembled DSSCs revealed that using ITO-TiO2-NrGONS-CuPc photoanode had the highest fill factor (FF) and power conversion efficiency (ɳ) of 69% and 4.36% respectively. These results show that the asymmetrical phthalocyanine complexes (4) and (5) exhibit significant improvement on the performance of the DSSC compared to our previous work on symmetrical carboxylated phthalocyanines with ɳ = 3.19%.
- Full Text:
- Date Issued: 2020
- Authors: Chindeka, Francis , Mashazi, Philani N , Britton, Jonathan , Oluwole, David O , Mapukata, Sivuyisiwe , Nyokong, Tebello
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/149076 , vital:38802 , https://doi.org/10.1016/j.jphotochem.2020.112612
- Description: Dye sensitized solar cells (DSSCs) were fabricated by using 2(3,5-biscarboxyphenoxy), 9(10), 16(17), 23(24)-tri(tertbutyl) phthalocyaninato Cu (4) and Zn (5) complexes as dyes on the ITO-TiO2 photoanodes containing reduced graphene oxide nanosheets (rGONS) or nitrogen-doped rGONS (NrGONS). The evaluation of the assembled DSSCs revealed that using ITO-TiO2-NrGONS-CuPc photoanode had the highest fill factor (FF) and power conversion efficiency (ɳ) of 69% and 4.36% respectively. These results show that the asymmetrical phthalocyanine complexes (4) and (5) exhibit significant improvement on the performance of the DSSC compared to our previous work on symmetrical carboxylated phthalocyanines with ɳ = 3.19%.
- Full Text:
- Date Issued: 2020
Optimizing phthalocyanine based dye-sensitized solar cells: The role of reduced graphene oxide
- Chindeka, Francis, Mashazi, Philani N, Britton, Jonathan, Fomo, Gertrude, Oluwole, David O, Sindelo, Azole, Nyokong, Tebello
- Authors: Chindeka, Francis , Mashazi, Philani N , Britton, Jonathan , Fomo, Gertrude , Oluwole, David O , Sindelo, Azole , Nyokong, Tebello
- Date: 2018
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/187770 , vital:44695 , xlink:href="https://doi.org/10.1016/j.synthmet.2018.10.021"
- Description: Dye-sensitized solar cells (DSSC) were fabricated by incorporating graphene materials as catalysts at the counter electrode. Platinum was also used as a catalyst for comparison purposes. Different phthalocyanines: hydroxyl indium tetracarboxyphenoxy phthalocyanine (1), chloro indium octacarboxy phthalocyanine (2) and dibenzoic acid silicon phthalocyanine (3) were used as dyes. Complex 3 gave the highest power conversion efficiency (η) of 3.19% when using nitrogen doped reduced graphene oxide nanosheets (NrGONS) as a catalyst at the counter electrode, and TiO2 containing rGONS at the anode. The value is close to 3.8% obtained when using Pt catalyst instead of NrGONS at the cathode, thus confirming that NrGONS is a promising candidate to replace the more expensive Pt. The study also shows that placing rGONS on both the anode and cathode improves efficiency.
- Full Text:
- Date Issued: 2018
- Authors: Chindeka, Francis , Mashazi, Philani N , Britton, Jonathan , Fomo, Gertrude , Oluwole, David O , Sindelo, Azole , Nyokong, Tebello
- Date: 2018
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/187770 , vital:44695 , xlink:href="https://doi.org/10.1016/j.synthmet.2018.10.021"
- Description: Dye-sensitized solar cells (DSSC) were fabricated by incorporating graphene materials as catalysts at the counter electrode. Platinum was also used as a catalyst for comparison purposes. Different phthalocyanines: hydroxyl indium tetracarboxyphenoxy phthalocyanine (1), chloro indium octacarboxy phthalocyanine (2) and dibenzoic acid silicon phthalocyanine (3) were used as dyes. Complex 3 gave the highest power conversion efficiency (η) of 3.19% when using nitrogen doped reduced graphene oxide nanosheets (NrGONS) as a catalyst at the counter electrode, and TiO2 containing rGONS at the anode. The value is close to 3.8% obtained when using Pt catalyst instead of NrGONS at the cathode, thus confirming that NrGONS is a promising candidate to replace the more expensive Pt. The study also shows that placing rGONS on both the anode and cathode improves efficiency.
- Full Text:
- Date Issued: 2018
Effects of differently shaped silver nanoparticles on the photophysics of pyridylsulfanyl-substituted phthalocyanines
- D’Souza, Sarah, Mashazi, Philani N, Britton, Jonathan, Nyokong, Tebello
- Authors: D’Souza, Sarah , Mashazi, Philani N , Britton, Jonathan , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7290 , http://hdl.handle.net/10962/d1020353
- Description: This paper reports on the photophysical behavior of (2-pyridylsulfanyl)phthalocyaninato zinc(II) and 2,9(10),16(17),23(24)-tetra-(2-pyridylsulfanyl)phthalocyaninato zinc(II) in the presence of differently shaped silver nanoparticles (nanospheres, nanotriangles and nanoflowers). The presence of shaped nanoparticles increased both triplet quantum yields and lifetimes of the tetra-substituted mercaptopyridine zinc phthalocyanine in DMSO. It is apparent from this work that the shape of the silver nanoparticle used is of little consequence in influencing photophysical behavior of the phthalocyanines. , Original publication is available at http://dx.doi.org/10.1016/j.poly.2015.06.038
- Full Text: false
- Authors: D’Souza, Sarah , Mashazi, Philani N , Britton, Jonathan , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7290 , http://hdl.handle.net/10962/d1020353
- Description: This paper reports on the photophysical behavior of (2-pyridylsulfanyl)phthalocyaninato zinc(II) and 2,9(10),16(17),23(24)-tetra-(2-pyridylsulfanyl)phthalocyaninato zinc(II) in the presence of differently shaped silver nanoparticles (nanospheres, nanotriangles and nanoflowers). The presence of shaped nanoparticles increased both triplet quantum yields and lifetimes of the tetra-substituted mercaptopyridine zinc phthalocyanine in DMSO. It is apparent from this work that the shape of the silver nanoparticle used is of little consequence in influencing photophysical behavior of the phthalocyanines. , Original publication is available at http://dx.doi.org/10.1016/j.poly.2015.06.038
- Full Text: false
Synthesis and singlet oxygen production by a phthalocyanine when embedded in asymmetric polymer membranes
- Mafukidze, Donovan M, Mashazi, Philani N, Nyokong, Tebello
- Authors: Mafukidze, Donovan M , Mashazi, Philani N , Nyokong, Tebello
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/188563 , vital:44765 , xlink:href="https://doi.org/10.1016/j.polymer.2016.10.032"
- Description: 2(3), 9(10), 16(17), 23(24)-Tetrakis-(4-aminophenoxy) phthalocyaninato indium (III) chloride (ClInTAPPc, 3) was first conjugated to two different polymers: polystyrene (PS) and polyacrylonitrile (PAN) to form 3-PS and 3-PAN. The conjugates were cast into the corresponding polymers to form membranes represented as 3-PS-membrane and 3-PAN-membrane, respectively. The prepared membranes were characterized using various techniques including scanning electron microscopy and solid state UV/Vis spectroscopy. Singlet oxygen quantum yields were higher for the 3-PS-membrane at 0.51 compared to 3-PAN-membrane at 0.35. The larger singlet oxygen also applies to 3-PS (0.63) compared to 3-PAN (0.38) when in solution.
- Full Text:
- Date Issued: 2016
- Authors: Mafukidze, Donovan M , Mashazi, Philani N , Nyokong, Tebello
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/188563 , vital:44765 , xlink:href="https://doi.org/10.1016/j.polymer.2016.10.032"
- Description: 2(3), 9(10), 16(17), 23(24)-Tetrakis-(4-aminophenoxy) phthalocyaninato indium (III) chloride (ClInTAPPc, 3) was first conjugated to two different polymers: polystyrene (PS) and polyacrylonitrile (PAN) to form 3-PS and 3-PAN. The conjugates were cast into the corresponding polymers to form membranes represented as 3-PS-membrane and 3-PAN-membrane, respectively. The prepared membranes were characterized using various techniques including scanning electron microscopy and solid state UV/Vis spectroscopy. Singlet oxygen quantum yields were higher for the 3-PS-membrane at 0.51 compared to 3-PAN-membrane at 0.35. The larger singlet oxygen also applies to 3-PS (0.63) compared to 3-PAN (0.38) when in solution.
- Full Text:
- Date Issued: 2016
Electrocatalytic behaviour of surface confined pentanethio cobalt (II) binuclear phthalocyanines towards the oxidation of 4-chlorophenol
- Makinde, Zainab O, Louzada, Marcel, Mashazi, Philani N, Nyokong, Tebello, Khene, Samson M
- Authors: Makinde, Zainab O , Louzada, Marcel , Mashazi, Philani N , Nyokong, Tebello , Khene, Samson M
- Date: 2017
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/188138 , vital:44726 , xlink:href="https://doi.org/10.1016/j.apsusc.2017.06.271"
- Description: Cobalt binuclear phthalocyanine (CoBiPc) bearing pentanethio substituents at the peripheral positions were synthesized. The immobilization of the synthesized cobalt phthalocyanines on gold electrode was achieved using self-assembled monolayer method (SAM). X-ray photoelectron spectroscopy (XPS) and Kelvin Probe (KP) techniques were used to characterise the formation of monomeric and binuclear phthalocyanine SAMs on the gold surface. The phthalocyanine SAMs on gold electrodes were investigated for electrocatalytic oxidation of 4-chlorophenol. The electrocatalytic properties of tetra- and octa- pentanethio substituted cobalt binuclear phthalocyanine (CoBiPc) are compared with their tetra- and octa-pentanethio substituted phthalocyanine (CoPc). The SAMs modified gold electrode surfaces showed a peak current enhancement and stability and reduction in electrocatalytic potentials compared to the bare or unmodified electrodes towards the detection of the 4-chlorophenol. The SAMs of cobalt binuclear phthalocyanines exhibited more enhanced electrocatalytic properties in terms of stability, detection peak current and reduction of the electrocatalytic over potential.
- Full Text:
- Date Issued: 2017
- Authors: Makinde, Zainab O , Louzada, Marcel , Mashazi, Philani N , Nyokong, Tebello , Khene, Samson M
- Date: 2017
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/188138 , vital:44726 , xlink:href="https://doi.org/10.1016/j.apsusc.2017.06.271"
- Description: Cobalt binuclear phthalocyanine (CoBiPc) bearing pentanethio substituents at the peripheral positions were synthesized. The immobilization of the synthesized cobalt phthalocyanines on gold electrode was achieved using self-assembled monolayer method (SAM). X-ray photoelectron spectroscopy (XPS) and Kelvin Probe (KP) techniques were used to characterise the formation of monomeric and binuclear phthalocyanine SAMs on the gold surface. The phthalocyanine SAMs on gold electrodes were investigated for electrocatalytic oxidation of 4-chlorophenol. The electrocatalytic properties of tetra- and octa- pentanethio substituted cobalt binuclear phthalocyanine (CoBiPc) are compared with their tetra- and octa-pentanethio substituted phthalocyanine (CoPc). The SAMs modified gold electrode surfaces showed a peak current enhancement and stability and reduction in electrocatalytic potentials compared to the bare or unmodified electrodes towards the detection of the 4-chlorophenol. The SAMs of cobalt binuclear phthalocyanines exhibited more enhanced electrocatalytic properties in terms of stability, detection peak current and reduction of the electrocatalytic over potential.
- Full Text:
- Date Issued: 2017
Characterization of electrodes modified by one pot or step by step electro-click reaction and axial ligation of iron tetracarboxyphthalocyanine
- Maringa, Audacity, Mashazi, Philani N, Nyokong, Tebello
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7307 , http://hdl.handle.net/10962/d1020384
- Description: The modification of the glassy carbon electrode (GCE) was carried out using two methods. The first method is simultaneous electropolymerization and electro-click followed by immersion into a solution of dimethyl formamide (DMF) containing FeTCPc. The second method is step by step whereby electropolymerization is carried out first followed by electro-click and then immersion into a DMF solution containing FeTCPc. From the electrochemical characterization, it was observed that the second route (step by step method) was the best as indicated by the ferricyanide studies (cyclic voltammetry and scanning electrochemical microscopy). In the electrooxidation of hydrazine, we obtained a potential of 0.26 V. Of interest were the detection limit of 6.4 μM and the catalytic rate constant of 2.1 × 109 cm3 mol−1 s−1. This shows that the sensor can be used for the electrooxidation of hydrazine. , Original publication is available at http://dx.doi.org/10.1016/j.electacta.2014.09.011
- Full Text: false
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7307 , http://hdl.handle.net/10962/d1020384
- Description: The modification of the glassy carbon electrode (GCE) was carried out using two methods. The first method is simultaneous electropolymerization and electro-click followed by immersion into a solution of dimethyl formamide (DMF) containing FeTCPc. The second method is step by step whereby electropolymerization is carried out first followed by electro-click and then immersion into a DMF solution containing FeTCPc. From the electrochemical characterization, it was observed that the second route (step by step method) was the best as indicated by the ferricyanide studies (cyclic voltammetry and scanning electrochemical microscopy). In the electrooxidation of hydrazine, we obtained a potential of 0.26 V. Of interest were the detection limit of 6.4 μM and the catalytic rate constant of 2.1 × 109 cm3 mol−1 s−1. This shows that the sensor can be used for the electrooxidation of hydrazine. , Original publication is available at http://dx.doi.org/10.1016/j.electacta.2014.09.011
- Full Text: false
Electrocatalytic activity of bimetallic Au–Pd nanoparticles in the presence of cobalt tetraaminophthalocyanine
- Maringa, Audacity, Mashazi, Philani N, Nyokong, Tebello
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7245 , http://hdl.handle.net/10962/d1020250
- Description: Au and Pd nanoparticles were individually or together electrodeposited on top of polymerized cobalt tetraaminophthalocyanine (poly-CoTAPc). When Pd and Au nanoparticles are co-deposited together, the electrode is denoted as Au–Pd (co-deposited)/poly-CoTAPc-GCE. X-ray photoelectron spectroscopy (XPS) was used to show the successful deposition of AuNPs, PdNPs and Au–Pd (co-deposited). The scanning electrochemical microscopy showed that Au–Pd (co-deposited)/poly-CoTAPc-GCE (with current range of 9.5–13.5 μA) was more conducting than Au–Pd (co-deposited)-GCE (with current range of 8–12 μA). Electrochemical impedance spectroscopy (EIS) showed that there was less resistance to charge transfer for Au–Pd (co-deposited)/poly-CoTAPc-GCE compared to the rest of the electrodes. Au–Pd (co-deposited)/poly-CoTAPc-GCE showed the best activity for the electrooxidation of hydrazine in terms of limit of detection (0.5 μM), hence shows promise as an electrocatalyst for electrooxidation of hydrazine. , Original publication is available at http://dx.doi.org/10.1016/j.jcis.2014.10.056
- Full Text: false
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7245 , http://hdl.handle.net/10962/d1020250
- Description: Au and Pd nanoparticles were individually or together electrodeposited on top of polymerized cobalt tetraaminophthalocyanine (poly-CoTAPc). When Pd and Au nanoparticles are co-deposited together, the electrode is denoted as Au–Pd (co-deposited)/poly-CoTAPc-GCE. X-ray photoelectron spectroscopy (XPS) was used to show the successful deposition of AuNPs, PdNPs and Au–Pd (co-deposited). The scanning electrochemical microscopy showed that Au–Pd (co-deposited)/poly-CoTAPc-GCE (with current range of 9.5–13.5 μA) was more conducting than Au–Pd (co-deposited)-GCE (with current range of 8–12 μA). Electrochemical impedance spectroscopy (EIS) showed that there was less resistance to charge transfer for Au–Pd (co-deposited)/poly-CoTAPc-GCE compared to the rest of the electrodes. Au–Pd (co-deposited)/poly-CoTAPc-GCE showed the best activity for the electrooxidation of hydrazine in terms of limit of detection (0.5 μM), hence shows promise as an electrocatalyst for electrooxidation of hydrazine. , Original publication is available at http://dx.doi.org/10.1016/j.jcis.2014.10.056
- Full Text: false
Tetracarboxylic acid cobalt phthalocyanine SAM on gold: Potential applications as amperometric sensor for H2O2 and fabrication of glucose biosensor
- Mashazi, Philani N, Ozoemena, Kenneth I, Nyokong, Tebello
- Authors: Mashazi, Philani N , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6578 , http://hdl.handle.net/10962/d1004141
- Description: This report describes the applications of cobalt tetracarboxylic acid phthalocyanine (CoTCAPc) self-assembled monolayer (SAM) immobilized onto a preformed 2-mercaptoethanol (Au-ME) SAM on gold surface (Au-ME-CoTCAPc SAM) as a potential amperometric sensor for the detection of hydrogen peroxide (H[subscript 2]O[subscript 2]) at neutral pH conditions. The Au-ME-CoTCAPc SAM sensor showed a very fast amperometric response time of approximately 1 s, good linearity at the studied concentration range of up to 5 μM with a coefficient R² = 0.993 and a detection limit of 0.4 μM oxidatively. Also reductively, the sensor exhibited a very fast amperometric response time (~1 s), linearity up to 5 μM with a coefficient R² = 0.986 and a detection limit of 0.2 μM. The cobalt tetracarboxylic acid phthalocyanine self-assembled monolayer was then evaluated as a mediator for glucose oxidase (GOx)-based biosensor. The GOx (enzyme) was immobilized covalently onto Au-ME-CoTCAPc SAM using coupling agents: N-ethyl-N(3-dimethylaminopropyl) carbodiimide (EDC) and N-hydroxy succinimide (NHS), and the results demonstrated a good catalytic behavior. Kinetic parameters associated with the enzymatic and mediator reactions were estimated using electrochemical versions of Lineweaver–Burk and Hanes equation, and the stability of the sensor was tested. The biosensor (Au-ME-CoTCAPc-GOx SAM) electrode showed good sensitivity (7.5 nA/mM) with a good detection limit of 8.4 μM at 3σ, smaller Michaelis–Menten constant (4.8 mM from Hanes plot) and very fast response time of approximately 5 s.
- Full Text:
- Date Issued: 2006
- Authors: Mashazi, Philani N , Ozoemena, Kenneth I , Nyokong, Tebello
- Date: 2006
- Language: English
- Type: Article
- Identifier: vital:6578 , http://hdl.handle.net/10962/d1004141
- Description: This report describes the applications of cobalt tetracarboxylic acid phthalocyanine (CoTCAPc) self-assembled monolayer (SAM) immobilized onto a preformed 2-mercaptoethanol (Au-ME) SAM on gold surface (Au-ME-CoTCAPc SAM) as a potential amperometric sensor for the detection of hydrogen peroxide (H[subscript 2]O[subscript 2]) at neutral pH conditions. The Au-ME-CoTCAPc SAM sensor showed a very fast amperometric response time of approximately 1 s, good linearity at the studied concentration range of up to 5 μM with a coefficient R² = 0.993 and a detection limit of 0.4 μM oxidatively. Also reductively, the sensor exhibited a very fast amperometric response time (~1 s), linearity up to 5 μM with a coefficient R² = 0.986 and a detection limit of 0.2 μM. The cobalt tetracarboxylic acid phthalocyanine self-assembled monolayer was then evaluated as a mediator for glucose oxidase (GOx)-based biosensor. The GOx (enzyme) was immobilized covalently onto Au-ME-CoTCAPc SAM using coupling agents: N-ethyl-N(3-dimethylaminopropyl) carbodiimide (EDC) and N-hydroxy succinimide (NHS), and the results demonstrated a good catalytic behavior. Kinetic parameters associated with the enzymatic and mediator reactions were estimated using electrochemical versions of Lineweaver–Burk and Hanes equation, and the stability of the sensor was tested. The biosensor (Au-ME-CoTCAPc-GOx SAM) electrode showed good sensitivity (7.5 nA/mM) with a good detection limit of 8.4 μM at 3σ, smaller Michaelis–Menten constant (4.8 mM from Hanes plot) and very fast response time of approximately 5 s.
- Full Text:
- Date Issued: 2006
Electrochemical impedimetric immunosensor for the detection of measles-specific IgG antibodies after measles infections
- Mashazi, Philani N, Tetyana, Phumlani, Vilakazi, Sibulelo, Nyokong, Tebello
- Authors: Mashazi, Philani N , Tetyana, Phumlani , Vilakazi, Sibulelo , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7325 , http://hdl.handle.net/10962/d1020575
- Description: The detection of measles-specific primary antibodies (IgG) using electrochemical impedimetric immunosensors is reported. The optimum conditions for electrode saturation were reached after 40 min for 1 μg ml−1 antibody concentrations. Surface roughness using AFM increased with each immobilization or antigen-antibody reaction step clearly confirming the surface modification and recognition between antigen and antibody. The human serum (HS) and new-born calf serum (NCS) spiked with antigen-specific antibody were studied to mimic the real sample analysis. The HS and NCS sera containing antibodies due to measles exhibited correlation between the increasing antibody serum concentrations and the charge-transfer resistance (electrochemically measured). This work clearly showed the potential use of impedance as the preferred electrochemical method for detecting measles-antibodies in label-free manner. , Original publication is available at http://dx.doi.org/10.1016/j.bios.2013.04.028
- Full Text: false
- Authors: Mashazi, Philani N , Tetyana, Phumlani , Vilakazi, Sibulelo , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7325 , http://hdl.handle.net/10962/d1020575
- Description: The detection of measles-specific primary antibodies (IgG) using electrochemical impedimetric immunosensors is reported. The optimum conditions for electrode saturation were reached after 40 min for 1 μg ml−1 antibody concentrations. Surface roughness using AFM increased with each immobilization or antigen-antibody reaction step clearly confirming the surface modification and recognition between antigen and antibody. The human serum (HS) and new-born calf serum (NCS) spiked with antigen-specific antibody were studied to mimic the real sample analysis. The HS and NCS sera containing antibodies due to measles exhibited correlation between the increasing antibody serum concentrations and the charge-transfer resistance (electrochemically measured). This work clearly showed the potential use of impedance as the preferred electrochemical method for detecting measles-antibodies in label-free manner. , Original publication is available at http://dx.doi.org/10.1016/j.bios.2013.04.028
- Full Text: false
The effect of the cobalt and manganese central metal ions on the nonlinear optical properties of tetra (4-propargyloxyphenoxy) phthalocyanines
- Mwanza, Daniel, Louzada, Marcel, Britton, Jonathan, Sekhosana, Kutloano E, Khene, Samson M, Nyokong, Tebello, Mashazi, Philani N
- Authors: Mwanza, Daniel , Louzada, Marcel , Britton, Jonathan , Sekhosana, Kutloano E , Khene, Samson M , Nyokong, Tebello , Mashazi, Philani N
- Date: 2018
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/233357 , vital:50083 , xlink:href="https://doi.org/10.1039/C8NJ00748A"
- Description: The metal-free (H2TPrOPhOPc), cobalt (CoTPrOPhOPc) and manganese (Mn(OAc)TPrOPhOPc) tetra propargyloxyphenoxy phthalocyanines were evaluated for their potential as optical limiting materials. The effect of the substituents and the central metal ions on the nonlinear optical properties was evaluated. The metal-free phthalocyanine exhibited better nonlinear optical properties when compared to the cobalt and manganese complexes owing to the metal ions quenching the excited state due to their half-filled d-orbitals. The nonlinear absorption coefficient (βeff, ×10−5 m MW−1) followed the trend of H2TPrOPhOPc > CoTPrOPhOPc > Mn(OAc)TPrOPhOPc. The values βeff (×10−5 m MW−1) using 532 nm Nd:YAG (560 nm monochromatic Ekspla) laser sources were 23.5 > 14.3 > 9.20 (14.4). The second-order nonlinear coefficient obtained using density functional theory calculations, the theoretical hyper-Rayleigh scattering (βHRS, ×10−28 esu), showed the decreasing trend for H2TPrOPhOPc (2.28) > CoTPrOPhOPc (2.10) > Mn(OAc)TPrOPhOPc (1.86). The 4-(propargyloxy)phenoxy substituents enhanced the optical limiting properties of the synthesized phthalocyanines.
- Full Text:
- Date Issued: 2018
- Authors: Mwanza, Daniel , Louzada, Marcel , Britton, Jonathan , Sekhosana, Kutloano E , Khene, Samson M , Nyokong, Tebello , Mashazi, Philani N
- Date: 2018
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/233357 , vital:50083 , xlink:href="https://doi.org/10.1039/C8NJ00748A"
- Description: The metal-free (H2TPrOPhOPc), cobalt (CoTPrOPhOPc) and manganese (Mn(OAc)TPrOPhOPc) tetra propargyloxyphenoxy phthalocyanines were evaluated for their potential as optical limiting materials. The effect of the substituents and the central metal ions on the nonlinear optical properties was evaluated. The metal-free phthalocyanine exhibited better nonlinear optical properties when compared to the cobalt and manganese complexes owing to the metal ions quenching the excited state due to their half-filled d-orbitals. The nonlinear absorption coefficient (βeff, ×10−5 m MW−1) followed the trend of H2TPrOPhOPc > CoTPrOPhOPc > Mn(OAc)TPrOPhOPc. The values βeff (×10−5 m MW−1) using 532 nm Nd:YAG (560 nm monochromatic Ekspla) laser sources were 23.5 > 14.3 > 9.20 (14.4). The second-order nonlinear coefficient obtained using density functional theory calculations, the theoretical hyper-Rayleigh scattering (βHRS, ×10−28 esu), showed the decreasing trend for H2TPrOPhOPc (2.28) > CoTPrOPhOPc (2.10) > Mn(OAc)TPrOPhOPc (1.86). The 4-(propargyloxy)phenoxy substituents enhanced the optical limiting properties of the synthesized phthalocyanines.
- Full Text:
- Date Issued: 2018
Exploiting Click Chemistry for the Covalent Immobilization of Tetra (4-Propargyloxyphenoxy) Metallophthalocyanines onto Phenylazide-Grafted Gold Surfaces
- Mwanza, Daniel, Mvango, Sindisiwe, Khene, Samson M, Nyokong, Tebello, Mashazi, Philani N
- Authors: Mwanza, Daniel , Mvango, Sindisiwe , Khene, Samson M , Nyokong, Tebello , Mashazi, Philani N
- Date: 2017
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189177 , vital:44824 , xlink:href="https://doi.org/10.1016/j.electacta.2017.09.115"
- Description: In this study, tetra-(4-propargyloxy)phenoxy phthalocyanines (MTPrOPhOPc) were covalently immobilized as thin films onto gold surfaces via click reaction. The gold electrode surfaces were pre-functionalized with phenylazide (Au-PAz) thin film using in-situ diazonium generation followed by electrografting. Copper (I) catalyzed alkynyl-azide cycloaddition (CuCAAC) reaction was used to covalently immobilize the MTPrOPhOPcs onto the gold electrode surfaces to form Au-PAz-MTPrOPhOPc. The MTPrOPhOPcs were further studied for their electrocatalytic and electroanalytical properties towards the detection of hydrogen peroxide. Au-PAz-MTPrOPhOPc exhibited good reproducibility and stability in various electrolyte conditions. Electrochemical and spectroscopic surface characterization of the functionalized gold electrode surfaces confirmed the presence of the phenylazide and MTPrOPhOPc thin monolayer films. The excellent electroanalysis of hydrogen peroxide with the limit of detection (LoD) and limit of quantification (LoQ) in the μM range was obtained. The electrocatalytic reduction peaks for H2O2 were observed at −0.37 V for Au-PAz-Mn(OAc)TPrOPhOPc and −0.31 V for Au-PAz-CoTPrOPhOPc when Ag|AgCl pseudo-reference electrode was used. The Au-PAz-Mn(OAc)TPrOPhOPc and Au-PAz-CoTPrOPhOPc gold electrode surfaces showed good sensitivity and reproducibility towards the electrocatalytic reduction of hydrogen peroxide in pH 7.4 phosphate buffer solution.
- Full Text:
- Date Issued: 2017
- Authors: Mwanza, Daniel , Mvango, Sindisiwe , Khene, Samson M , Nyokong, Tebello , Mashazi, Philani N
- Date: 2017
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189177 , vital:44824 , xlink:href="https://doi.org/10.1016/j.electacta.2017.09.115"
- Description: In this study, tetra-(4-propargyloxy)phenoxy phthalocyanines (MTPrOPhOPc) were covalently immobilized as thin films onto gold surfaces via click reaction. The gold electrode surfaces were pre-functionalized with phenylazide (Au-PAz) thin film using in-situ diazonium generation followed by electrografting. Copper (I) catalyzed alkynyl-azide cycloaddition (CuCAAC) reaction was used to covalently immobilize the MTPrOPhOPcs onto the gold electrode surfaces to form Au-PAz-MTPrOPhOPc. The MTPrOPhOPcs were further studied for their electrocatalytic and electroanalytical properties towards the detection of hydrogen peroxide. Au-PAz-MTPrOPhOPc exhibited good reproducibility and stability in various electrolyte conditions. Electrochemical and spectroscopic surface characterization of the functionalized gold electrode surfaces confirmed the presence of the phenylazide and MTPrOPhOPc thin monolayer films. The excellent electroanalysis of hydrogen peroxide with the limit of detection (LoD) and limit of quantification (LoQ) in the μM range was obtained. The electrocatalytic reduction peaks for H2O2 were observed at −0.37 V for Au-PAz-Mn(OAc)TPrOPhOPc and −0.31 V for Au-PAz-CoTPrOPhOPc when Ag|AgCl pseudo-reference electrode was used. The Au-PAz-Mn(OAc)TPrOPhOPc and Au-PAz-CoTPrOPhOPc gold electrode surfaces showed good sensitivity and reproducibility towards the electrocatalytic reduction of hydrogen peroxide in pH 7.4 phosphate buffer solution.
- Full Text:
- Date Issued: 2017
Bioelectrocatalysis and surface analysis of gold coated with nickel oxide/hydroxide and glucose oxidase towards detection of glucose:
- Njoko, Nqobile, Louzada, Marcel, Britton, Jonathan, Khene, Samson M, Nyokong, Tebello, Mashazi, Philani N
- Authors: Njoko, Nqobile , Louzada, Marcel , Britton, Jonathan , Khene, Samson M , Nyokong, Tebello , Mashazi, Philani N
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/150071 , vital:38937 , https://doi.org/10.1016/j.colsurfb.2020.110981
- Description: The fabricating of metal oxide thin films onto conducting surfaces continues to grow and their potential applications as surfaces for biosensor applications is of paramount importance. The correct orientation of glucose oxidase redox enzymes yields very important biointerfaces capable of selectively detecting D-glucose as a measure of blood sugar for healthy and diabetic sick patients. The electrodeposition of redox enzymes, such as glucose oxidase enzymes, onto gold electrode surfaces pre-modified with nickel oxide was investigated in this work.
- Full Text:
- Date Issued: 2020
- Authors: Njoko, Nqobile , Louzada, Marcel , Britton, Jonathan , Khene, Samson M , Nyokong, Tebello , Mashazi, Philani N
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/150071 , vital:38937 , https://doi.org/10.1016/j.colsurfb.2020.110981
- Description: The fabricating of metal oxide thin films onto conducting surfaces continues to grow and their potential applications as surfaces for biosensor applications is of paramount importance. The correct orientation of glucose oxidase redox enzymes yields very important biointerfaces capable of selectively detecting D-glucose as a measure of blood sugar for healthy and diabetic sick patients. The electrodeposition of redox enzymes, such as glucose oxidase enzymes, onto gold electrode surfaces pre-modified with nickel oxide was investigated in this work.
- Full Text:
- Date Issued: 2020
Electrode Modification Using Alkynyl Substituted Fe(II) Phthalocyanine via Electrografting and Click Chemistry for Electrocatalysis
- Nxele, Siphesihle R, Mashazi, Philani N, Nyokong, Tebello
- Authors: Nxele, Siphesihle R , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7284 , http://hdl.handle.net/10962/d1020329
- Description: In this work, tetrakis(5-hexyn-oxy)Fe(II) phthalocyanine was synthesised in order to perform a click reaction between the terminal alkyne groups and an azide group on a glassy carbon electrode (GCE) surface. An azide group was formed on the electrode surface following electrografting using 4-azidobenzene diazonium tetrafluoroborate by electrochemical reduction. The Cu(I) catalyzed alkyne-azide Huisgen cycloaddition reaction was then employed in order to react the terminal alkyne groups on the phthalocyanine with the azide groups on the GCE surface. The modified electrode was employed to catalyse the oxidation of hydrazine. The electrode showed good electrocatalytic ability towards the detection of hydrazine with a sensitivity of 15.38 µA mM−1 and a limit of detection of 1.09 µM. , Original publication is available at http://dx.doi.org/10.1002/elan.201500212
- Full Text: false
- Authors: Nxele, Siphesihle R , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7284 , http://hdl.handle.net/10962/d1020329
- Description: In this work, tetrakis(5-hexyn-oxy)Fe(II) phthalocyanine was synthesised in order to perform a click reaction between the terminal alkyne groups and an azide group on a glassy carbon electrode (GCE) surface. An azide group was formed on the electrode surface following electrografting using 4-azidobenzene diazonium tetrafluoroborate by electrochemical reduction. The Cu(I) catalyzed alkyne-azide Huisgen cycloaddition reaction was then employed in order to react the terminal alkyne groups on the phthalocyanine with the azide groups on the GCE surface. The modified electrode was employed to catalyse the oxidation of hydrazine. The electrode showed good electrocatalytic ability towards the detection of hydrazine with a sensitivity of 15.38 µA mM−1 and a limit of detection of 1.09 µM. , Original publication is available at http://dx.doi.org/10.1002/elan.201500212
- Full Text: false
Electrode modification using nanocomposites of electropolymerised cobalt phthalocyanines supported on multiwalled carbon nanotubes
- Nyoni, Stephen, Mashazi, Philani N, Nyokong, Tebello
- Authors: Nyoni, Stephen , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7293 , http://hdl.handle.net/10962/d1020356
- Description: A polymer of tetra(4)-(4,6-diaminopyrimidin-2-ylthio) phthalocyaninatocobalt(II) (CoPyPc) has been deposited over a multiwalled carbon nanotube (MWCNT) platform and its electrocatalytic properties investigated side by side with polymerized cobalt tetraamino phthalocyanine (CoTAPc). X-ray photoelectron spectroscopy, scanning electron microscopy and cyclic voltammetry studies were used for characterization of the prepared polymers of cobalt phthalocyanine derivatives and their nanocomposites. l-Cysteine was used as a test analyte for the electrocatalytic activity of the nanocomposites of polymerized cobalt phthalocyanines and multiwalled carbon nanotubes. The electrocatalytic activity of both polymerized cobalt phthalocyanines was found to be superior when polymerization was done on top of MWCNTs compared to bare glassy carbon electrode. A higher sensitivity for l-cysteine detection was obtained on CoTAPc compared to CoPyPc. , Original publication is available at http://dx.doi.org/10.1007/s10008-015-2985-6
- Full Text: false
- Authors: Nyoni, Stephen , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7293 , http://hdl.handle.net/10962/d1020356
- Description: A polymer of tetra(4)-(4,6-diaminopyrimidin-2-ylthio) phthalocyaninatocobalt(II) (CoPyPc) has been deposited over a multiwalled carbon nanotube (MWCNT) platform and its electrocatalytic properties investigated side by side with polymerized cobalt tetraamino phthalocyanine (CoTAPc). X-ray photoelectron spectroscopy, scanning electron microscopy and cyclic voltammetry studies were used for characterization of the prepared polymers of cobalt phthalocyanine derivatives and their nanocomposites. l-Cysteine was used as a test analyte for the electrocatalytic activity of the nanocomposites of polymerized cobalt phthalocyanines and multiwalled carbon nanotubes. The electrocatalytic activity of both polymerized cobalt phthalocyanines was found to be superior when polymerization was done on top of MWCNTs compared to bare glassy carbon electrode. A higher sensitivity for l-cysteine detection was obtained on CoTAPc compared to CoPyPc. , Original publication is available at http://dx.doi.org/10.1007/s10008-015-2985-6
- Full Text: false
Iodine-Doped Cobalt Phthalocyanine Supported on Multiwalled Carbon Nanotubes for Electrocatalysis of Oxygen Reduction Reaction
- Nyoni, Stephen, Mashazi, Philani N, Nyokong, Tebello
- Authors: Nyoni, Stephen , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7242 , http://hdl.handle.net/10962/d1020246
- Description: 4-(4,6-Diaminopyrimidin-2-ylthio) phthalocyaninatocobalt(II) (CoPyPc) was iodine doped, and its electrocatalytic properties explored. Physical characterization techniques such as UV-vis, X-ray photoelectron, electron paramagnetic resonance and infra-red spectroscopy were used. Cyclic voltammetry, electrochemical impedance spectroscopy and rotating disk electrode were used for electrochemical characterization of electrodes modified with the prepared phthalocyanine and its nanocomposites. The electrocatalytic effect of a new iodine-doped cobalt phthalocyanine derivative supported on multiwalled carbon nanotubes was then investigated towards oxygen reduction reaction. The electrocatalytic activity of the iodine-doped cobalt phthalocyanine was found to be superior in terms of current over the undoped phthalocyanine nanocomposite. , Original publication is available at http://dx.doi.org/10.1002/elan.201400499
- Full Text: false
- Authors: Nyoni, Stephen , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7242 , http://hdl.handle.net/10962/d1020246
- Description: 4-(4,6-Diaminopyrimidin-2-ylthio) phthalocyaninatocobalt(II) (CoPyPc) was iodine doped, and its electrocatalytic properties explored. Physical characterization techniques such as UV-vis, X-ray photoelectron, electron paramagnetic resonance and infra-red spectroscopy were used. Cyclic voltammetry, electrochemical impedance spectroscopy and rotating disk electrode were used for electrochemical characterization of electrodes modified with the prepared phthalocyanine and its nanocomposites. The electrocatalytic effect of a new iodine-doped cobalt phthalocyanine derivative supported on multiwalled carbon nanotubes was then investigated towards oxygen reduction reaction. The electrocatalytic activity of the iodine-doped cobalt phthalocyanine was found to be superior in terms of current over the undoped phthalocyanine nanocomposite. , Original publication is available at http://dx.doi.org/10.1002/elan.201400499
- Full Text: false
Photophysical properties of zinc phthalocyanine–uridine single walled carbon nanotube – conjugates
- Ogbodu, Racheal O, Amuhaya, Edith, Mashazi, Philani N, Nyokong, Tebello
- Authors: Ogbodu, Racheal O , Amuhaya, Edith , Mashazi, Philani N , Nyokong, Tebello
- Date: 2015
- Language: English
- Type: Article
- Identifier: vital:7274 , http://hdl.handle.net/10962/d1020289 , http://dx.doi.org/10.1016/j.saa.2015.04.040
- Description: Original publication is available at http://dx.doi.org/10.1016/j.saa.2015.04.040
- Full Text: false
- Date Issued: 2015
- Authors: Ogbodu, Racheal O , Amuhaya, Edith , Mashazi, Philani N , Nyokong, Tebello
- Date: 2015
- Language: English
- Type: Article
- Identifier: vital:7274 , http://hdl.handle.net/10962/d1020289 , http://dx.doi.org/10.1016/j.saa.2015.04.040
- Description: Original publication is available at http://dx.doi.org/10.1016/j.saa.2015.04.040
- Full Text: false
- Date Issued: 2015
Synthesis and photophysical properties of nanocomposites of aluminum tetrasulfonated phthalocyanine covalently linked to glutathione capped CdTe/CdS/ZnS quantum dots
- Oluwole, David O, Britton, Jonathan, Mashazi, Philani N, Nyokong, Tebello
- Authors: Oluwole, David O , Britton, Jonathan , Mashazi, Philani N , Nyokong, Tebello
- Date: 2015
- Language: English
- Type: text , Article
- Identifier: vital:7276 , http://hdl.handle.net/10962/d1020291 , http://dx.doi.org/10.1016/j.synthmet.2015.04.015
- Description: Aluminum tetrasulfonated phthalocyanine (ClAlTSPc) was covalently linked with different sizes of glutathione capped CdTe/CdS/ZnS quantum dots (QDs). The photophysical and Förster resonance energy transfer (FRET) properties of the nanoconjugates were investigated. The CdTe/CdS/ZnS(6.3) nanocomposite showed the highest enhancement in its photophysical properties while (CdTe/CdS/ZnS(3.2) nanocomposite showed the least. Highest FRET efficiency was observed in the linked CdTe/CdS/ZnS(6.3) nanocomposites at 93%. Hence, the combination of CdTe/CdS/ZnS with ClAlTSPc exhibited excellent photophysical properties. , Original publication is available at http://dx.doi.org/10.1016/j.synthmet.2015.04.015
- Full Text: false
- Date Issued: 2015
- Authors: Oluwole, David O , Britton, Jonathan , Mashazi, Philani N , Nyokong, Tebello
- Date: 2015
- Language: English
- Type: text , Article
- Identifier: vital:7276 , http://hdl.handle.net/10962/d1020291 , http://dx.doi.org/10.1016/j.synthmet.2015.04.015
- Description: Aluminum tetrasulfonated phthalocyanine (ClAlTSPc) was covalently linked with different sizes of glutathione capped CdTe/CdS/ZnS quantum dots (QDs). The photophysical and Förster resonance energy transfer (FRET) properties of the nanoconjugates were investigated. The CdTe/CdS/ZnS(6.3) nanocomposite showed the highest enhancement in its photophysical properties while (CdTe/CdS/ZnS(3.2) nanocomposite showed the least. Highest FRET efficiency was observed in the linked CdTe/CdS/ZnS(6.3) nanocomposites at 93%. Hence, the combination of CdTe/CdS/ZnS with ClAlTSPc exhibited excellent photophysical properties. , Original publication is available at http://dx.doi.org/10.1016/j.synthmet.2015.04.015
- Full Text: false
- Date Issued: 2015
Physicochemical and antimicrobial photodynamic chemotherapy of unsymmetrical indium phthalocyanines alone or in the presence of magnetic nanoparticles
- Osifeko, Olawale L, Uddin, Imran, Mashazi, Philani N, Nyokong, Tebello
- Authors: Osifeko, Olawale L , Uddin, Imran , Mashazi, Philani N , Nyokong, Tebello
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189121 , vital:44818 , xlink:href="https://doi.org/10.1039/C5NJ01922B"
- Description: An AB3 type photosensitiser, consisting of 4-pyridylsulfanyl units (denoted as B3) and one aminophenoxy (denoted as A) group (complex 3) was synthesized. Complex 3 was then quaternized to form complex 4. The aminophenoxy substituent of complex 3 was used for the formation of the amide linkage with the carboxylic functionalised magnetic nanoparticles. Complexes 3 and 4 and their conjugates with magnetic nanoparticles were then used for photodynamic antimicrobial chemotherapy on E. coli. The cationic photosensitiser 4 showed a high efficiency for photodynamic antimicrobial chemotherapy at a very low concentration compared to its conjugate on E. coli.
- Full Text:
- Date Issued: 2016
- Authors: Osifeko, Olawale L , Uddin, Imran , Mashazi, Philani N , Nyokong, Tebello
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189121 , vital:44818 , xlink:href="https://doi.org/10.1039/C5NJ01922B"
- Description: An AB3 type photosensitiser, consisting of 4-pyridylsulfanyl units (denoted as B3) and one aminophenoxy (denoted as A) group (complex 3) was synthesized. Complex 3 was then quaternized to form complex 4. The aminophenoxy substituent of complex 3 was used for the formation of the amide linkage with the carboxylic functionalised magnetic nanoparticles. Complexes 3 and 4 and their conjugates with magnetic nanoparticles were then used for photodynamic antimicrobial chemotherapy on E. coli. The cationic photosensitiser 4 showed a high efficiency for photodynamic antimicrobial chemotherapy at a very low concentration compared to its conjugate on E. coli.
- Full Text:
- Date Issued: 2016
Synthesis, density functional theory, molecular dynamics and electrochemical studies of 3-thiopheneacetic acid-capped gold nanoparticles
- Sosibo, Ndabenhle M, Mdluli, Phumlane S, Mashazi, Philani N, Dyan, Busiswa, Revaprasadu, Neerish, Nyokong, Tebello, Tshikhudo, Robert T, Skepu, Amanda, Van Der Lingen, Elma
- Authors: Sosibo, Ndabenhle M , Mdluli, Phumlane S , Mashazi, Philani N , Dyan, Busiswa , Revaprasadu, Neerish , Nyokong, Tebello , Tshikhudo, Robert T , Skepu, Amanda , Van Der Lingen, Elma
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/246446 , vital:51477 , xlink:href="https://doi.org/10.1016/j.molstruc.2011.09.057"
- Description: Gold nanoparticles capped with a bifunctional ligand, 3-thiopheneacetic acid (3-TAA) were synthesised by borohydride reduction at room temperature. The transmission electron microscopy (TEM) analysis showed that the particle aggregates and had semi-linear partial linkages that could be attributed to multi-modal binding of the ligand with various gold nanoparticles through the terminal thiolether (–S–) group and oxygen of the carboxylic (–COOH) group. This bimodal interaction led to limited stability of the resultant nanoparticles when tested using highly electrolytic media. To investigate further, density functional theory (DFT) quantum chemical and molecular dynamic calculations were conducted. The energetically favorable binding modes of the ligand to gold nanoparticle surfaces using the Gaussian program were studied. The DFT results showed kinetic stability of Au–3-TAA–Au interactions leading to inter-particle coupling or aggregation. Electrochemical analysis of the resultant nature of the capping agent revealed that 3-thiopheneacetic acid did not form a polymer during the preparation of Au–3-TAA. The cyclic voltammograms of Au–3-TAA nanoparticles coated glassy carbon electrode showed a typical gold character with the oxidation and reduction peaks at 1.4 V and 0.9 V, respectively.
- Full Text:
- Date Issued: 2012
- Authors: Sosibo, Ndabenhle M , Mdluli, Phumlane S , Mashazi, Philani N , Dyan, Busiswa , Revaprasadu, Neerish , Nyokong, Tebello , Tshikhudo, Robert T , Skepu, Amanda , Van Der Lingen, Elma
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/246446 , vital:51477 , xlink:href="https://doi.org/10.1016/j.molstruc.2011.09.057"
- Description: Gold nanoparticles capped with a bifunctional ligand, 3-thiopheneacetic acid (3-TAA) were synthesised by borohydride reduction at room temperature. The transmission electron microscopy (TEM) analysis showed that the particle aggregates and had semi-linear partial linkages that could be attributed to multi-modal binding of the ligand with various gold nanoparticles through the terminal thiolether (–S–) group and oxygen of the carboxylic (–COOH) group. This bimodal interaction led to limited stability of the resultant nanoparticles when tested using highly electrolytic media. To investigate further, density functional theory (DFT) quantum chemical and molecular dynamic calculations were conducted. The energetically favorable binding modes of the ligand to gold nanoparticle surfaces using the Gaussian program were studied. The DFT results showed kinetic stability of Au–3-TAA–Au interactions leading to inter-particle coupling or aggregation. Electrochemical analysis of the resultant nature of the capping agent revealed that 3-thiopheneacetic acid did not form a polymer during the preparation of Au–3-TAA. The cyclic voltammograms of Au–3-TAA nanoparticles coated glassy carbon electrode showed a typical gold character with the oxidation and reduction peaks at 1.4 V and 0.9 V, respectively.
- Full Text:
- Date Issued: 2012
Covalent attachment of cobalt (II) tetra-(3-carboxyphenoxy) phthalocyanine onto pre-grafted gold electrode for the determination of catecholamine neurotransmitters:
- Tshenkeng, Keamogetse, Mashazi, Philani N
- Authors: Tshenkeng, Keamogetse , Mashazi, Philani N
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/163521 , vital:41045 , https://doi.org/10.1016/j.electacta.2020.137015
- Description: The fabrication of electroactive thin films onto gold electrode surfaces yields very interesting surfaces with excellent electrocatalytic activity. Cobalt (II) tetra-(3-carboxyphenoxy) phthalocyanine (CoTCPhOPc) was successfully synthesized and fully characterized using FT-IR spectroscopy, ultraviolet-visible (UV–Vis) spectroscopy, magnetic circular dichroism (MCD) spectroscopy, elemental analysis, and mass spectrometry. The CoTCPhOPc was immobilized onto phenylethylamino (PEA) pre-grafted gold electrode surface, Au-PEA, using amide coupling reaction to obtain Au-PEA-CoTCPhOPc.
- Full Text:
- Date Issued: 2020
- Authors: Tshenkeng, Keamogetse , Mashazi, Philani N
- Date: 2020
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/163521 , vital:41045 , https://doi.org/10.1016/j.electacta.2020.137015
- Description: The fabrication of electroactive thin films onto gold electrode surfaces yields very interesting surfaces with excellent electrocatalytic activity. Cobalt (II) tetra-(3-carboxyphenoxy) phthalocyanine (CoTCPhOPc) was successfully synthesized and fully characterized using FT-IR spectroscopy, ultraviolet-visible (UV–Vis) spectroscopy, magnetic circular dichroism (MCD) spectroscopy, elemental analysis, and mass spectrometry. The CoTCPhOPc was immobilized onto phenylethylamino (PEA) pre-grafted gold electrode surface, Au-PEA, using amide coupling reaction to obtain Au-PEA-CoTCPhOPc.
- Full Text:
- Date Issued: 2020
- «
- ‹
- 1
- ›
- »