- Title
- Development of a creep sample retrieval technique and friction weld site repair procedure
- Creator
- Wedderburn, Ian Norman
- Subject
- Friction welding
- Date Issued
- 2013
- Date
- 2013
- Type
- Thesis
- Type
- Doctoral
- Type
- DPhil
- Identifier
- vital:9635
- Identifier
- http://hdl.handle.net/10948/d1020116
- Description
- The remnant life monitoring of creep loaded high temperature and pressure components in power stations is critical to ensuring their safe and cost effective operation as failures can have severe consequences. Effective creep life condition monitoring allows for optimising component life predictions and subsequent plant maintenance decisions. In South Africa many power generation stations have been in operation well beyond their 30 year design service life, as such knowledge of the remnant creep life of high temperature and pressure components, such as steam pipelines, becomes of utmost importance. Techniques for the remnant creep life assessments of critical high temperature and pressure components must therefore be as effective as possible. The common and well accepted in-situ inspection technique for assessing creep damage in steam pipes is by the metallographic replication technique. The technique is however limited to the outer surface of the pipe, without information on damage within the wall. This research will illustrate a means of obtaining a sample for creep life analysis with depth through the wall of a pipe, as wells as an alternative technique for the repair of the sample retrieval site. A sample retrieval technique was developed that would retrieve a small diameter cylindrical sample from a cored blind hole for creep analysis by visual creep void assessment or by the small punch creep test. The small punch creep test requires only a small diameter thin disc of material for testing for which its results are comparable with conventional uniaxial creep testing which requires a much larger sample of material. The smaller sample requirement of the small punch creep test therefore allows for a vastly reduced invasive sample retrieval operation and consequently smaller repair size area. Also the fact that the sample is retrieved from a blind hole is advantageous since the pipe wall is not penetrated which would require full plant shutdown. A friction welding technique was identified as an alternative to traditional arc fusion welding for the repair of the sample retrieval site, this technique being the Friction Hydro Pillar Processing technique. Friction Hydro Pillar Processing is a solid-state welding technique and as such has a number of inherent benefits over arc fusion welding as the weld is performed below the melting temperature of the material. From a process point of view Friction Hydro Pillar Processing is ideally suited for automation, has virtually no fumes generated, minimal distortion is experienced and no spatter has to be removed afterwards. The technique has yet to see industrial application and as such development of suitable process parameters was undertaken. Finally, to apply the sample retrieval and repair operations in-situ to a steam pipe in a power plant suitable equipment was developed. Existing friction welding equipment is generally bulky workshop based equipment and is unsuitable for on-site work due to its size and weight. Therefore development of dedicated equipment was required to enable Friction Hydro Pillar Processing to be applied to steam pipes within a power plant environment.
- Format
- xxiii, 231 leaves
- Format
- Publisher
- Nelson Mandela Metropolitan University
- Publisher
- Faculty of Engineering, the Built Environment and Information Technology
- Language
- English
- Rights
- Nelson Mandela Metropolitan University
- Hits: 1109
- Visitors: 1104
- Downloads: 96
Collections
NMMU School of Engineering
| Thumbnail | File | Description | Size | Format | |||
|---|---|---|---|---|---|---|---|
| View Details Download | SOURCEPDF | 12 MB | Adobe Acrobat PDF | View Details Download |