Pre-concentration of toxic metals using electrospun amino-functionalized nylon-6 nanofibre sorbent
- Darko, G, Sobola, A, Adewuyi, Sheriff, Okonkwo, J O, Torto, N
- Authors: Darko, G , Sobola, A , Adewuyi, Sheriff , Okonkwo, J O , Torto, N
- Date: 2012
- Language: English
- Type: Article
- Identifier: vital:6571 , http://hdl.handle.net/10962/d1004134
- Description: This paper presents a new approach for pre-concentrating toxic metals (As, Cd, Ni and Pb) in aqueous environments using an amino-functionalized electrospun nanofibre sorbent. The sorbent, composed of nanofibres of average diameter 80 ± 10 nm and specific surface area of 58m2 g–1, exhibited fast adsorption kinetics (<20 min) for As, Cd, Ni and Pb. The optimalpHfor the uptake of As, Cd, Ni and Pb were 5.5, 6.0, 6.5 and 11, respectively. The adsorption process best fitted the Freundlich isothermand followed the first-order kinetics. The highest pre-concentration achieved using the sorbent was 41.99 (Ni in treated wastewater). The capacity of the sorbent to pre-concentrate the toxic metals was compared with those of aqua regia and HNO3+H2O2 digestions. The pre-concentration factors achieved for Cd in river water samples can be ranked as aqua regia digestion (0.73) > adsorption (0.34)>HNO3+H2O2 (0.23) digestion.Asimilar trend was observed for Ni in river water as well as Ni andCdin tap water samples. Pb ions in the river water samples were pre-concentrated slightly better using the two digestion methods pre-concentration factors ~22) compared to adsorption method (pre-concentration factor ~21). The use of the electrospun amino-functionalized nanofibre sorbent presentsanefficientand cost-effective alternative for pre-concentration of toxic metals inaqueousenvironments.
- Full Text:
- Date Issued: 2012
- Authors: Darko, G , Sobola, A , Adewuyi, Sheriff , Okonkwo, J O , Torto, N
- Date: 2012
- Language: English
- Type: Article
- Identifier: vital:6571 , http://hdl.handle.net/10962/d1004134
- Description: This paper presents a new approach for pre-concentrating toxic metals (As, Cd, Ni and Pb) in aqueous environments using an amino-functionalized electrospun nanofibre sorbent. The sorbent, composed of nanofibres of average diameter 80 ± 10 nm and specific surface area of 58m2 g–1, exhibited fast adsorption kinetics (<20 min) for As, Cd, Ni and Pb. The optimalpHfor the uptake of As, Cd, Ni and Pb were 5.5, 6.0, 6.5 and 11, respectively. The adsorption process best fitted the Freundlich isothermand followed the first-order kinetics. The highest pre-concentration achieved using the sorbent was 41.99 (Ni in treated wastewater). The capacity of the sorbent to pre-concentrate the toxic metals was compared with those of aqua regia and HNO3+H2O2 digestions. The pre-concentration factors achieved for Cd in river water samples can be ranked as aqua regia digestion (0.73) > adsorption (0.34)>HNO3+H2O2 (0.23) digestion.Asimilar trend was observed for Ni in river water as well as Ni andCdin tap water samples. Pb ions in the river water samples were pre-concentrated slightly better using the two digestion methods pre-concentration factors ~22) compared to adsorption method (pre-concentration factor ~21). The use of the electrospun amino-functionalized nanofibre sorbent presentsanefficientand cost-effective alternative for pre-concentration of toxic metals inaqueousenvironments.
- Full Text:
- Date Issued: 2012
The use of response surface methodology to evaluate the impact of level 2 SUPAC–IR changes on the in vitro release of metronidazole and ranitidine from a fixed-dose combination tablet
- King’ori, Loti D, Walker, Roderick B
- Authors: King’ori, Loti D , Walker, Roderick B
- Date: 2012
- Language: English
- Type: text , Article
- Identifier: vital:6391 , http://hdl.handle.net/10962/d1006313
- Description: The purpose of this study was to evaluate the effect of different levels of disintegrant (croscarmellose sodium, CCS), binder (polyvinylprrolidone K30, PVP–K30), and lubricant (magnesium stearate) on the in vitro release of metronidazole (MTZ) and rantidine (RTD) from a solid oral fixed-dose combination tablet. The excipient levels investigated were Level 2 changes in component and composition described in the Scale-Up and Post Approval Changes for Immediate Release (SUPAC–IR) guidance (1). Batches of tablets (1000 units) were manufactured by wet granulation using a Saral high-shear mixer granulator and a Manesty B3B rotary tablet press. Weight uniformity, friability, and disintegration of all tablets were assessed, and all batches complied with compendial specifications. The amount of drug released (Q) at ten minutes was dependent on the levels of CCS in the formulation, and the effect of PVP–K30 and magnesium stearate was dependent on the levels of CCS. Synergistic interactions between independent variables were observed for the Q10 value for RTD, whereas PVP–K30 and magnesium stearate exhibited an antagonistic effect on the Q10 values for MTZ and RTD. The use of response surface methodology facilitated an investigation into the effect of Level 2 component and composition changes, as described in SUPAC–IR, on the in vitro release of MTZ and RTD from a fixed-dose combination (FDC) solid oral dosage form (SODF).
- Full Text:
- Date Issued: 2012
- Authors: King’ori, Loti D , Walker, Roderick B
- Date: 2012
- Language: English
- Type: text , Article
- Identifier: vital:6391 , http://hdl.handle.net/10962/d1006313
- Description: The purpose of this study was to evaluate the effect of different levels of disintegrant (croscarmellose sodium, CCS), binder (polyvinylprrolidone K30, PVP–K30), and lubricant (magnesium stearate) on the in vitro release of metronidazole (MTZ) and rantidine (RTD) from a solid oral fixed-dose combination tablet. The excipient levels investigated were Level 2 changes in component and composition described in the Scale-Up and Post Approval Changes for Immediate Release (SUPAC–IR) guidance (1). Batches of tablets (1000 units) were manufactured by wet granulation using a Saral high-shear mixer granulator and a Manesty B3B rotary tablet press. Weight uniformity, friability, and disintegration of all tablets were assessed, and all batches complied with compendial specifications. The amount of drug released (Q) at ten minutes was dependent on the levels of CCS in the formulation, and the effect of PVP–K30 and magnesium stearate was dependent on the levels of CCS. Synergistic interactions between independent variables were observed for the Q10 value for RTD, whereas PVP–K30 and magnesium stearate exhibited an antagonistic effect on the Q10 values for MTZ and RTD. The use of response surface methodology facilitated an investigation into the effect of Level 2 component and composition changes, as described in SUPAC–IR, on the in vitro release of MTZ and RTD from a fixed-dose combination (FDC) solid oral dosage form (SODF).
- Full Text:
- Date Issued: 2012
- «
- ‹
- 1
- ›
- »