Characterization of electrodes modified by one pot or step by step electro-click reaction and axial ligation of iron tetracarboxyphthalocyanine
- Maringa, Audacity, Mashazi, Philani N, Nyokong, Tebello
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/193892 , vital:45403 , xlink:href="https://doi.org/10.1016/j.electacta.2014.09.011"
- Description: The modification of the glassy carbon electrode (GCE) was carried out using two methods. The first method is simultaneous electropolymerization and electro-click followed by immersion into a solution of dimethyl formamide (DMF) containing FeTCPc. The second method is step by step whereby electropolymerization is carried out first followed by electro-click and then immersion into a DMF solution containing FeTCPc. From the electrochemical characterization, it was observed that the second route (step by step method) was the best as indicated by the ferricyanide studies (cyclic voltammetry and scanning electrochemical microscopy). In the electrooxidation of hydrazine, we obtained a potential of 0.26 V. Of interest were the detection limit of 6.4 μM and the catalytic rate constant of 2.1 × 109 cm3 mol−1 s−1. This shows that the sensor can be used for the electrooxidation of hydrazine.
- Full Text:
- Date Issued: 2014
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/193892 , vital:45403 , xlink:href="https://doi.org/10.1016/j.electacta.2014.09.011"
- Description: The modification of the glassy carbon electrode (GCE) was carried out using two methods. The first method is simultaneous electropolymerization and electro-click followed by immersion into a solution of dimethyl formamide (DMF) containing FeTCPc. The second method is step by step whereby electropolymerization is carried out first followed by electro-click and then immersion into a DMF solution containing FeTCPc. From the electrochemical characterization, it was observed that the second route (step by step method) was the best as indicated by the ferricyanide studies (cyclic voltammetry and scanning electrochemical microscopy). In the electrooxidation of hydrazine, we obtained a potential of 0.26 V. Of interest were the detection limit of 6.4 μM and the catalytic rate constant of 2.1 × 109 cm3 mol−1 s−1. This shows that the sensor can be used for the electrooxidation of hydrazine.
- Full Text:
- Date Issued: 2014
Characterization of electrodes modified by one pot or step by step electro-click reaction and axial ligation of iron tetracarboxyphthalocyanine
- Maringa, Audacity, Mashazi, Philani N, Nyokong, Tebello
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7307 , http://hdl.handle.net/10962/d1020384
- Description: The modification of the glassy carbon electrode (GCE) was carried out using two methods. The first method is simultaneous electropolymerization and electro-click followed by immersion into a solution of dimethyl formamide (DMF) containing FeTCPc. The second method is step by step whereby electropolymerization is carried out first followed by electro-click and then immersion into a DMF solution containing FeTCPc. From the electrochemical characterization, it was observed that the second route (step by step method) was the best as indicated by the ferricyanide studies (cyclic voltammetry and scanning electrochemical microscopy). In the electrooxidation of hydrazine, we obtained a potential of 0.26 V. Of interest were the detection limit of 6.4 μM and the catalytic rate constant of 2.1 × 109 cm3 mol−1 s−1. This shows that the sensor can be used for the electrooxidation of hydrazine. , Original publication is available at http://dx.doi.org/10.1016/j.electacta.2014.09.011
- Full Text: false
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7307 , http://hdl.handle.net/10962/d1020384
- Description: The modification of the glassy carbon electrode (GCE) was carried out using two methods. The first method is simultaneous electropolymerization and electro-click followed by immersion into a solution of dimethyl formamide (DMF) containing FeTCPc. The second method is step by step whereby electropolymerization is carried out first followed by electro-click and then immersion into a DMF solution containing FeTCPc. From the electrochemical characterization, it was observed that the second route (step by step method) was the best as indicated by the ferricyanide studies (cyclic voltammetry and scanning electrochemical microscopy). In the electrooxidation of hydrazine, we obtained a potential of 0.26 V. Of interest were the detection limit of 6.4 μM and the catalytic rate constant of 2.1 × 109 cm3 mol−1 s−1. This shows that the sensor can be used for the electrooxidation of hydrazine. , Original publication is available at http://dx.doi.org/10.1016/j.electacta.2014.09.011
- Full Text: false
Electrochemical behaviour of gold nanoparticles and Co tetraaminophthalocyanine on glassy carbon electrode
- Maringa, Audacity, Antunes, Edith M, Nyokong, Tebello
- Authors: Maringa, Audacity , Antunes, Edith M , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7306 , http://hdl.handle.net/10962/d1020383
- Description: We report on the electrodeposition of gold nanoparticles (AuNPs) onto the glassy carbon electrode (GCE) followed by polymerization of cobalt tetraamino phthalocyanine (CoPc(NH2)4) on top (represented as poly-CoPc(NH2)4-/AuNPs-GCE). The modified electrode where CoPc(NH2)4 is polymerized first followed by deposition of AuNPs is represented as AuNPs/poly-CoPc(NH2)4-GCE. In the absence of AuNPs, the electrode is represented as poly-CoPc(NH2)4-GCE or for AuNPs alone (AuNPs-GCE). The surface coverage was 1.5 × 10−9 mol cm−2 for AuNPs-GCE and 3.0 × 10−9 mol cm−2 for the rest of the modified electrodes. AuNPs/CoPc(NH2)4-GCE exhibited high electrocatalytic activity towards the oxidation of nitrite, with detection potential of 0.76 V. The catalytic rate constant of 3.96 × 107 cm3 mol−1 s−1 was obtained for nitrite oxidation. , Original publication is available at http://dx.doi.org/10.1016/j.electacta.2013.12.132
- Full Text: false
- Authors: Maringa, Audacity , Antunes, Edith M , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7306 , http://hdl.handle.net/10962/d1020383
- Description: We report on the electrodeposition of gold nanoparticles (AuNPs) onto the glassy carbon electrode (GCE) followed by polymerization of cobalt tetraamino phthalocyanine (CoPc(NH2)4) on top (represented as poly-CoPc(NH2)4-/AuNPs-GCE). The modified electrode where CoPc(NH2)4 is polymerized first followed by deposition of AuNPs is represented as AuNPs/poly-CoPc(NH2)4-GCE. In the absence of AuNPs, the electrode is represented as poly-CoPc(NH2)4-GCE or for AuNPs alone (AuNPs-GCE). The surface coverage was 1.5 × 10−9 mol cm−2 for AuNPs-GCE and 3.0 × 10−9 mol cm−2 for the rest of the modified electrodes. AuNPs/CoPc(NH2)4-GCE exhibited high electrocatalytic activity towards the oxidation of nitrite, with detection potential of 0.76 V. The catalytic rate constant of 3.96 × 107 cm3 mol−1 s−1 was obtained for nitrite oxidation. , Original publication is available at http://dx.doi.org/10.1016/j.electacta.2013.12.132
- Full Text: false
Electrochemical behaviour of gold nanoparticles and Co tetraaminophthalocyanine on glassy carbon electrode
- Maringa, Audacity, Antunes, Edith M, Nyokong, Tebello
- Authors: Maringa, Audacity , Antunes, Edith M , Nyokong, Tebello
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241573 , vital:50951 , xlink:href="https://doi.org/10.1016/j.electacta.2013.12.132"
- Description: We report on the electrodeposition of gold nanoparticles (AuNPs) onto the glassy carbon electrode (GCE) followed by polymerization of cobalt tetraamino phthalocyanine (CoPc(NH2)4) on top (represented as poly-CoPc(NH2)4-/AuNPs-GCE). The modified electrode where CoPc(NH2)4 is polymerized first followed by deposition of AuNPs is represented as AuNPs/poly-CoPc(NH2)4-GCE. In the absence of AuNPs, the electrode is represented as poly-CoPc(NH2)4-GCE or for AuNPs alone (AuNPs-GCE). The surface coverage was 1.5 × 10−9 mol cm−2 for AuNPs-GCE and 3.0 × 10−9 mol cm−2 for the rest of the modified electrodes. AuNPs/CoPc(NH2)4-GCE exhibited high electrocatalytic activity towards the oxidation of nitrite, with detection potential of 0.76 V. The catalytic rate constant of 3.96 × 107 cm3 mol−1 s−1 was obtained for nitrite oxidation.
- Full Text:
- Date Issued: 2014
- Authors: Maringa, Audacity , Antunes, Edith M , Nyokong, Tebello
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241573 , vital:50951 , xlink:href="https://doi.org/10.1016/j.electacta.2013.12.132"
- Description: We report on the electrodeposition of gold nanoparticles (AuNPs) onto the glassy carbon electrode (GCE) followed by polymerization of cobalt tetraamino phthalocyanine (CoPc(NH2)4) on top (represented as poly-CoPc(NH2)4-/AuNPs-GCE). The modified electrode where CoPc(NH2)4 is polymerized first followed by deposition of AuNPs is represented as AuNPs/poly-CoPc(NH2)4-GCE. In the absence of AuNPs, the electrode is represented as poly-CoPc(NH2)4-GCE or for AuNPs alone (AuNPs-GCE). The surface coverage was 1.5 × 10−9 mol cm−2 for AuNPs-GCE and 3.0 × 10−9 mol cm−2 for the rest of the modified electrodes. AuNPs/CoPc(NH2)4-GCE exhibited high electrocatalytic activity towards the oxidation of nitrite, with detection potential of 0.76 V. The catalytic rate constant of 3.96 × 107 cm3 mol−1 s−1 was obtained for nitrite oxidation.
- Full Text:
- Date Issued: 2014
- «
- ‹
- 1
- ›
- »