The impact of HAART on sexuality and medicine taking behaviours among people living with HIV/AIDS in Grahamstown
- Authors: Chizanga, Tongai Aldridge
- Date: 2010
- Subjects: AIDS (Disease) -- Treatment -- South Africa -- Grahamstown HIV infections -- Treatment -- South Africa -- Grahamstown Antiretroviral agents -- South Africa -- Grahamstown Patient compliance -- South Africa -- Grahamstown AIDS (Disease) -- Social aspects -- South Africa -- Grahamstown HIV infections -- Social aspects -- South Africa -- Grahamstown AIDS (Disease) -- Patients -- South Africa -- Grahamstown -- Sexual behavior HIV-positive persons -- South Africa -- Grahamstown -- Sexual behavior Patient education -- South Africa -- Grahamstown
- Language: English
- Type: Thesis , Masters , MPharm
- Identifier: vital:3750 , http://hdl.handle.net/10962/d1003228
- Description: Introduction: Adherence to Highly Active Antiretroviral Therapy (HAART) is critical for optimal therapeutic outcomes. A possible factor in adherence is the impact of HAART on sexual functioning. Methods: A mixed methods approach was used. A cohort of 14 people living with HIV/AIDS (PLWHA) in Grahamstown was identified. Two semi-structured interviews and two structured questionnaires were administered. In-depth interviews were conducted with two HIV counsellors in so as to obtain a different perspective on the topics. The theoretical framework used three health behaviour models: the Health Belief Model, Leventhal‘s Common-Sense Model of self regulation and the Transtheoretical model. Results: The participants were between 27 and 49 years old and had been on HAART for between 9 months and 10 years. Six participants were support staff members from Rhodes University and eight from the Raphael Centre – a local NGO which assists PLWHA.In most of the participants HAART was associated with increased libido and improved sexual functioning (sexual activity and sexual enjoyment). The use of alcohol increased risky sexual behaviour. Issues of adherence were seemingly not directly affected by the effects of HAART on sexuality. PLWHA, especially women, face challenges related to their sexuality, some of which are not directly related to their illness and treatment. The fear of transmitting drug resistant HIV or getting re-infected, stigma, disclosure issues,difficulties negotiating for safe sex among women, HAART-related lipodystrophic changes that affect one‘s sense of self and unmet reproductive needs are some of the problems that were reported. The men‘s dislike for condoms was overt and blatant. Discussion: Being diagnosed with HIV and reaching a point where treatment is requiredare life-changing events. Making decisions about one‘s life (including adherence to HAART, alcohol use and knowingly partaking in risky sexual encounters) become all the more significant in the context of AIDS. Intentional non-adherence is informed by the individual‘s assessment of the costs and benefits of taking treatment. Cultural influences,gendered power relations and misconceptions strongly influence sexual behaviours. Conclusion: The general lack of attention among health care providers concerning issues related to PLWHA‘s sexuality and reproductive issues needs to be addressed. Insights fromthe theoretical models should be integrated with empirical findings in designing adherence interventions.
- Full Text:
- Date Issued: 2010
- Authors: Chizanga, Tongai Aldridge
- Date: 2010
- Subjects: AIDS (Disease) -- Treatment -- South Africa -- Grahamstown HIV infections -- Treatment -- South Africa -- Grahamstown Antiretroviral agents -- South Africa -- Grahamstown Patient compliance -- South Africa -- Grahamstown AIDS (Disease) -- Social aspects -- South Africa -- Grahamstown HIV infections -- Social aspects -- South Africa -- Grahamstown AIDS (Disease) -- Patients -- South Africa -- Grahamstown -- Sexual behavior HIV-positive persons -- South Africa -- Grahamstown -- Sexual behavior Patient education -- South Africa -- Grahamstown
- Language: English
- Type: Thesis , Masters , MPharm
- Identifier: vital:3750 , http://hdl.handle.net/10962/d1003228
- Description: Introduction: Adherence to Highly Active Antiretroviral Therapy (HAART) is critical for optimal therapeutic outcomes. A possible factor in adherence is the impact of HAART on sexual functioning. Methods: A mixed methods approach was used. A cohort of 14 people living with HIV/AIDS (PLWHA) in Grahamstown was identified. Two semi-structured interviews and two structured questionnaires were administered. In-depth interviews were conducted with two HIV counsellors in so as to obtain a different perspective on the topics. The theoretical framework used three health behaviour models: the Health Belief Model, Leventhal‘s Common-Sense Model of self regulation and the Transtheoretical model. Results: The participants were between 27 and 49 years old and had been on HAART for between 9 months and 10 years. Six participants were support staff members from Rhodes University and eight from the Raphael Centre – a local NGO which assists PLWHA.In most of the participants HAART was associated with increased libido and improved sexual functioning (sexual activity and sexual enjoyment). The use of alcohol increased risky sexual behaviour. Issues of adherence were seemingly not directly affected by the effects of HAART on sexuality. PLWHA, especially women, face challenges related to their sexuality, some of which are not directly related to their illness and treatment. The fear of transmitting drug resistant HIV or getting re-infected, stigma, disclosure issues,difficulties negotiating for safe sex among women, HAART-related lipodystrophic changes that affect one‘s sense of self and unmet reproductive needs are some of the problems that were reported. The men‘s dislike for condoms was overt and blatant. Discussion: Being diagnosed with HIV and reaching a point where treatment is requiredare life-changing events. Making decisions about one‘s life (including adherence to HAART, alcohol use and knowingly partaking in risky sexual encounters) become all the more significant in the context of AIDS. Intentional non-adherence is informed by the individual‘s assessment of the costs and benefits of taking treatment. Cultural influences,gendered power relations and misconceptions strongly influence sexual behaviours. Conclusion: The general lack of attention among health care providers concerning issues related to PLWHA‘s sexuality and reproductive issues needs to be addressed. Insights fromthe theoretical models should be integrated with empirical findings in designing adherence interventions.
- Full Text:
- Date Issued: 2010
An investigation into the feasibility of incorporating didanosine into innovative solid lipid nanocarriers
- Authors: Wa Kasongo, Kasongo
- Date: 2010
- Subjects: Antiretroviral agents HIV infections -- Drug testing Didanosine Nanoparticles Drug delivery systems Nanostructured materials Lipids -- Therapeutic use
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3800 , http://hdl.handle.net/10962/d1003278
- Description: The research undertaken in these studies aimed to investigate the feasibility of developing and manufacturing innovative solid lipid carriers, such as solid lipid nanoparticles (SLN) and/or nanostructured lipid carriers (NLC) using a hot high pressure homogenization method, for didanosine(DDI). In addition, studies using in vitro differential protein adsorption were undertaken to establish whether the SLN and/or NLC have the potential to deliver DDI to the central nervous system (CNS). Prior to initiating pre-formulation, formulation development and optimization studies of DDI-Ioaded SLN and/or NLC, it was necessary to develop and validate an analytical method for the in vitro quantitation and analysis of DDI. An accurate, precise and sensitive RP-HPLC method with UV detection set at 248 nm was developed, optimized and validated for the quantitative in vitro analysis of DDI in formulations. Pre-formulation studies were designed to evaluate the thermal stability of DDI and to select and characterize lipid excipients that may be used for the manufacture of the nanocarriers. It was established that DDI is thermostable at temperatures not exceeding 163°C and therefore a hot high pressure homogenization technique could be used to manufacture DDI-loaded SLN and/or NLC. Lipid screening studies revealed that DDI is poorly soluble in both solid and liquid lipids. A combination of Precirol® ATO 5 and Transcutol® HP was found to have the best solubilizing-potential for DDI of all lipids investigated. The inclusion of Transcutol® HP into Precirol® ATO 5 changed the polymorphic form of the solid lipid from the stable 13-modification to a material that exhibited the co-existence between α- and β-polymorphic forms. The relatively high solubility of DDI in Transcutol® HP compared to Precirol® ATO 5 was an indication that a solid lipid matrix prepared from a binary mixture of Precirol® ATO 5 and Transcutol® HP was likely to have a higher loading capacity and encapsulation efficiency for DDI than a matrix consisting of Precirol® ATO 5 alone. Furthermore, the potential for the solid lipid matrix to exist in the α- and/or β-modifications when Transcutol® HP was added to Precirol® ATO 5 suggested that expulsion of DDI from a solid lipid matrix during prolonged storage periods was likely to be minimal. Therefore it was considered logical to investigate the feasibility of incorporating DDI into NLC and not in SLN. However, due to the limited solubility of DDI in lipids, formulation development of DDI-loaded NLC commenced using small quantities of DDI. Formulation development and optimization studies of DDI-loaded NLC were initially aimed at selecting a surfactant system that was capable of stabilizing NLC in an aqueous environment. Solutol® HS alone or a ternary mixture consisting of Solutol® HS, Tween® 80 and Lutrol® F68 was found to stabilize the nanoparticles in terms of particle size and the polydispersity index. The use of the ternary mixture as the surfactant system was preferred to using Solutol® HS alone as Lutrol® F68 and especially Tween® 80 have been successfully used to target the delivery of API to the brain. Aqueous DDI-free and DDI-Ioaded NLC containing increasing amounts of DDI were manufactured using hot high pressure homogenization at 800 bar for three cycles. The NLC formulations were characterized in terms of particle size, polydispersity index, zeta potential, and polymorphism, degree of crystallinity, encapsulation efficiency (EE), shape and surface morphology. The mean particle size for all formulations was below 250 nm with narrow polydispersity indices, indicating that narrow particle size distribution had been achieved. The d99% values for all formulations tested, were generated using laser diffractometry, and were below 400 nm, with span values ranging from 0.84 - 1.19 also suggesting that a narrow particle size distribution had been achieved. The zeta potential values measured in double distilled water with the conductivity adjusted to 50 μS/cm ranged from -18.4 to -11.4 mV. In addition, all the formulations showed a decrease in the degree of crystallinity as compared to the bulk lipid material and WAXS shows that the formulations existed in a single β-modification form. Furthermore DDI that had been incorporated into the NLC appeared to be molecularly dispersed in the lipid matrices. These parameters remained unaffected for most formulations following storage for two months at 25°C. In addition these formulations contained a mixture of spherical and non-spherical particles irrespective of the amount of DDI that was added during the manufacture of the formulations. These studies showed that it was feasible to develop and incorporate small amounts of DDI into NLC. However in order to use these delivery systems for oral administration of DDI to paediatric patients, strategies to improve the amount of DDI that could be loaded into the particles and to achieve high encapsulation efficiencies had to be developed. The limited solubility of DDI in lipid media was identified as a major factor that affected the loading capacity and encapsulation efficiency of DDI in the NLC. Therefore, a novel strategy aimed at increasing the saturation solubility of DDI in the lipid by attempting to increase the dissolution velocity of the drug in the lipid using a particle size reduction approach, was designed and investigated. DDI was dispersed in Transcutol® HP and the particle size of DDI in the liquid lipid medium was reduced gradually using hot high pressure homogenization and the product obtained from these studies was used to manufacture DDI-loaded NLC using a cold high pressure homogenization procedure. Although the encapsulation efficiency and drug loading following use of this approach was relatively high, the particles were large and showed a tendency to grow in size leading to the formation of microparticles after storage for two months at 25°C. In addition, the degree of crystallinity of the nanoparticles increased rapidly over the same storage period which led to expulsion of DDI nanoparticles for the NLC, despite the DDI loading in NLC being unaffected. It was clearly evident that this new approach of manufacturing solid lipid nanocarriers could be used as a platform not only for enhancing the loading capacity of DDI in solid lipid nanocarriers but also for other hydrophilic drugs. Differential protein adsorption patterns of DDI-loaded NLC were generated in vitro using two-dimensional polyacrylamide gel electrophoresis (2-D PAGE) in order to establish the potential for these systems to deliver DDI to the CNS. NLC formulations containing small amounts of DDI were used as these formulations showed a better stability profile than the formulation with a higher encapsulation efficiency and drug loading capacity. Furthermore, the encapsulation efficiency and drug loading of DDI were considered sufficient for use in 2-D PAGE studies. Data obtained from 2-D PAGE analysis reveal that DDI-loaded NLC preferentially adsorb proteins in vitro that are responsible for specific brain targeting in vivo. More importantly, these studies reveal that in addition to Tween® 80 that has already been shown to have the potential to target CDDS to the brain, Solutol® HS 15 has the potential to achieve a similar objective. Consequently, DDI-loaded NLC have the potential to deliver DDI to the brain and these results may be used as a platform for conducting in vivo studies to establish whether DDI can cross the blood brain barrier and enter the CNS when administered in NLC which may in turn lead to a major breakthrough in the management of HIV/AIDS and Aids Dementia Complex (ADC).
- Full Text:
- Date Issued: 2010
- Authors: Wa Kasongo, Kasongo
- Date: 2010
- Subjects: Antiretroviral agents HIV infections -- Drug testing Didanosine Nanoparticles Drug delivery systems Nanostructured materials Lipids -- Therapeutic use
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3800 , http://hdl.handle.net/10962/d1003278
- Description: The research undertaken in these studies aimed to investigate the feasibility of developing and manufacturing innovative solid lipid carriers, such as solid lipid nanoparticles (SLN) and/or nanostructured lipid carriers (NLC) using a hot high pressure homogenization method, for didanosine(DDI). In addition, studies using in vitro differential protein adsorption were undertaken to establish whether the SLN and/or NLC have the potential to deliver DDI to the central nervous system (CNS). Prior to initiating pre-formulation, formulation development and optimization studies of DDI-Ioaded SLN and/or NLC, it was necessary to develop and validate an analytical method for the in vitro quantitation and analysis of DDI. An accurate, precise and sensitive RP-HPLC method with UV detection set at 248 nm was developed, optimized and validated for the quantitative in vitro analysis of DDI in formulations. Pre-formulation studies were designed to evaluate the thermal stability of DDI and to select and characterize lipid excipients that may be used for the manufacture of the nanocarriers. It was established that DDI is thermostable at temperatures not exceeding 163°C and therefore a hot high pressure homogenization technique could be used to manufacture DDI-loaded SLN and/or NLC. Lipid screening studies revealed that DDI is poorly soluble in both solid and liquid lipids. A combination of Precirol® ATO 5 and Transcutol® HP was found to have the best solubilizing-potential for DDI of all lipids investigated. The inclusion of Transcutol® HP into Precirol® ATO 5 changed the polymorphic form of the solid lipid from the stable 13-modification to a material that exhibited the co-existence between α- and β-polymorphic forms. The relatively high solubility of DDI in Transcutol® HP compared to Precirol® ATO 5 was an indication that a solid lipid matrix prepared from a binary mixture of Precirol® ATO 5 and Transcutol® HP was likely to have a higher loading capacity and encapsulation efficiency for DDI than a matrix consisting of Precirol® ATO 5 alone. Furthermore, the potential for the solid lipid matrix to exist in the α- and/or β-modifications when Transcutol® HP was added to Precirol® ATO 5 suggested that expulsion of DDI from a solid lipid matrix during prolonged storage periods was likely to be minimal. Therefore it was considered logical to investigate the feasibility of incorporating DDI into NLC and not in SLN. However, due to the limited solubility of DDI in lipids, formulation development of DDI-loaded NLC commenced using small quantities of DDI. Formulation development and optimization studies of DDI-loaded NLC were initially aimed at selecting a surfactant system that was capable of stabilizing NLC in an aqueous environment. Solutol® HS alone or a ternary mixture consisting of Solutol® HS, Tween® 80 and Lutrol® F68 was found to stabilize the nanoparticles in terms of particle size and the polydispersity index. The use of the ternary mixture as the surfactant system was preferred to using Solutol® HS alone as Lutrol® F68 and especially Tween® 80 have been successfully used to target the delivery of API to the brain. Aqueous DDI-free and DDI-Ioaded NLC containing increasing amounts of DDI were manufactured using hot high pressure homogenization at 800 bar for three cycles. The NLC formulations were characterized in terms of particle size, polydispersity index, zeta potential, and polymorphism, degree of crystallinity, encapsulation efficiency (EE), shape and surface morphology. The mean particle size for all formulations was below 250 nm with narrow polydispersity indices, indicating that narrow particle size distribution had been achieved. The d99% values for all formulations tested, were generated using laser diffractometry, and were below 400 nm, with span values ranging from 0.84 - 1.19 also suggesting that a narrow particle size distribution had been achieved. The zeta potential values measured in double distilled water with the conductivity adjusted to 50 μS/cm ranged from -18.4 to -11.4 mV. In addition, all the formulations showed a decrease in the degree of crystallinity as compared to the bulk lipid material and WAXS shows that the formulations existed in a single β-modification form. Furthermore DDI that had been incorporated into the NLC appeared to be molecularly dispersed in the lipid matrices. These parameters remained unaffected for most formulations following storage for two months at 25°C. In addition these formulations contained a mixture of spherical and non-spherical particles irrespective of the amount of DDI that was added during the manufacture of the formulations. These studies showed that it was feasible to develop and incorporate small amounts of DDI into NLC. However in order to use these delivery systems for oral administration of DDI to paediatric patients, strategies to improve the amount of DDI that could be loaded into the particles and to achieve high encapsulation efficiencies had to be developed. The limited solubility of DDI in lipid media was identified as a major factor that affected the loading capacity and encapsulation efficiency of DDI in the NLC. Therefore, a novel strategy aimed at increasing the saturation solubility of DDI in the lipid by attempting to increase the dissolution velocity of the drug in the lipid using a particle size reduction approach, was designed and investigated. DDI was dispersed in Transcutol® HP and the particle size of DDI in the liquid lipid medium was reduced gradually using hot high pressure homogenization and the product obtained from these studies was used to manufacture DDI-loaded NLC using a cold high pressure homogenization procedure. Although the encapsulation efficiency and drug loading following use of this approach was relatively high, the particles were large and showed a tendency to grow in size leading to the formation of microparticles after storage for two months at 25°C. In addition, the degree of crystallinity of the nanoparticles increased rapidly over the same storage period which led to expulsion of DDI nanoparticles for the NLC, despite the DDI loading in NLC being unaffected. It was clearly evident that this new approach of manufacturing solid lipid nanocarriers could be used as a platform not only for enhancing the loading capacity of DDI in solid lipid nanocarriers but also for other hydrophilic drugs. Differential protein adsorption patterns of DDI-loaded NLC were generated in vitro using two-dimensional polyacrylamide gel electrophoresis (2-D PAGE) in order to establish the potential for these systems to deliver DDI to the CNS. NLC formulations containing small amounts of DDI were used as these formulations showed a better stability profile than the formulation with a higher encapsulation efficiency and drug loading capacity. Furthermore, the encapsulation efficiency and drug loading of DDI were considered sufficient for use in 2-D PAGE studies. Data obtained from 2-D PAGE analysis reveal that DDI-loaded NLC preferentially adsorb proteins in vitro that are responsible for specific brain targeting in vivo. More importantly, these studies reveal that in addition to Tween® 80 that has already been shown to have the potential to target CDDS to the brain, Solutol® HS 15 has the potential to achieve a similar objective. Consequently, DDI-loaded NLC have the potential to deliver DDI to the brain and these results may be used as a platform for conducting in vivo studies to establish whether DDI can cross the blood brain barrier and enter the CNS when administered in NLC which may in turn lead to a major breakthrough in the management of HIV/AIDS and Aids Dementia Complex (ADC).
- Full Text:
- Date Issued: 2010
Formulation and evaluation of captopril loaded polymethacrylate and hydroxypropyl methycellulose microcapsules
- Khamanga, Sandile Maswazi Malungelo
- Authors: Khamanga, Sandile Maswazi Malungelo
- Date: 2010
- Subjects: Hypertension -- Treatment , Hypertension -- Chemotherapy , Angiotensin converting enzyme -- Inhibitors , Hypotensive agents -- Development , Pharmacokinetics
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3860 , http://hdl.handle.net/10962/d1013443
- Description: Angiotensin-converting enzyme (ACE) inhibitors are some of the most commonly prescribed medications for hypertension. They are cited in many papers as the treatment most often recommended by guidelines and favoured over other antihypertensive drugs as first-line agents especially when other high-risk conditions are present, such as diabetic nephropathy. The development of captopril (CPT) was amongst the earliest successes of the revolutionary concept of structure-based drug design. Due to its relatively poor pharmacokinetic profile or short half-life of about 1 hour, the formulation of sustained-release microcapsule dosage form is useful to improve patient compliance and to achieve predictable and optimized therapeutic plasma concentrations. Currently, CPT is mainly administered in tablet form. One of the difficulties of CPT formulation has been reported to be its instability in aqueous solutions. CPT is characterized by a lack of a strong chromophore and, therefore, not able to absorb at the more useful UV–Vis region of the spectrum. For this reason, an accurate, simple, reproducible, and sensitive HPLC-ECD method was developed and validated for the determination of CPT in dosage forms. The method was successfully applied for the determination of CPT in commercial and developed formulations. Possible drug-excipient and excipient-excipient interactions were investigated prior to formulating CPT microcapsules because successful formulation of a stable and effective solid dosage form depends on careful selection of excipients. Nuclear magnetic resonance spectroscopy, Fourier transform infra-red spectroscopy (FT-IR), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used for the identification and purity testing of CPT and excipients. The studies revealed no thermal changes during stress testing of binary and whole mixtures which indicate absence of solid state interactions. There were no shifts, appearance and disappearance in the endothermic or exothermic peaks and on the change of other associated enthalpy values on thermal curves obtained with DSC method. Characteristic peaks for common functional groups in the FT-IR were present in all the mixtures indicating the absence of incompatibility. The techniques used in this study can be said to have been efficient in the characterization and evaluation of the drug and excipients. The technique of microencapsulation by oil-in-oil was used to prepare CPT microcapsules. The effects of polymer molecular weight, homogenizing speed on the particle size, flow properties, morphology, surface properties and release characteristics of the prepared CPT microcapsules were examined. In order to decrease the complexity of the analysis and reduce cost response surface methodology using best polynomial equations was successfully used to quantify the effect of the formulation variables and develop an optimized formulation thereby minimizing the number of experimental trials. There was a burst effect during the first stage of dissolution. Scanning electron microscopy (SEM) results indicated that the initial burst effect observed in drug release could be attributed to dissolution of CPT crystals present at the surface or embedded in the superficial layer of the matrix. During the preparation of microcapsules, the drug might have been trapped near the surface of the microcapsules and or might have diffused quickly through the porous surface. The release kinetics of CPT from most formulations followed Fickian diffusion mechanism. SEM photographs showed that diffusion took place through pores at the surface of the microcapsules. The Kopcha model diffusion and erosion terms showed predominance of diffusion relative to swelling or erosion throughout the entire test period. Drug release mechanism was also confirmed by Makoid-Banakar and Korsmeyer-Peppas models exponents which further support diffusion release mechanism in most formulations. The models postulate that the total of drug release is a summation of a couple of mechanisms; burst release, relaxation induced controlled-release and diffusional release. Inspection of the 2D contour and 3D response surfaces allowed the determination of the geometrical nature of the surfaces and further providing results about the interaction of the different variables used in central composite design (CCD). The wide variation indicated that the factor combinations resulted in different drug release rates. Lagrange, canonical and mathematical modelling were used to determine the nature of the stationery point of the models. This represented the optimal variables or stationery points where there is interaction in the experimental space. It is difficult to understand the shape of a fitted response by mere inspection of the algebraic polynomial when there are many independent variables in the model. Canonical and Lagrange analyses facilitated the interpretation of the surface plots after a mathematical transformation of the original variables into new variables. In conclusion, these results suggest the potential application of Eudragit® / Methocel® microcapsules as suitable sustained-release drug delivery system for CPT.
- Full Text:
- Date Issued: 2010
- Authors: Khamanga, Sandile Maswazi Malungelo
- Date: 2010
- Subjects: Hypertension -- Treatment , Hypertension -- Chemotherapy , Angiotensin converting enzyme -- Inhibitors , Hypotensive agents -- Development , Pharmacokinetics
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3860 , http://hdl.handle.net/10962/d1013443
- Description: Angiotensin-converting enzyme (ACE) inhibitors are some of the most commonly prescribed medications for hypertension. They are cited in many papers as the treatment most often recommended by guidelines and favoured over other antihypertensive drugs as first-line agents especially when other high-risk conditions are present, such as diabetic nephropathy. The development of captopril (CPT) was amongst the earliest successes of the revolutionary concept of structure-based drug design. Due to its relatively poor pharmacokinetic profile or short half-life of about 1 hour, the formulation of sustained-release microcapsule dosage form is useful to improve patient compliance and to achieve predictable and optimized therapeutic plasma concentrations. Currently, CPT is mainly administered in tablet form. One of the difficulties of CPT formulation has been reported to be its instability in aqueous solutions. CPT is characterized by a lack of a strong chromophore and, therefore, not able to absorb at the more useful UV–Vis region of the spectrum. For this reason, an accurate, simple, reproducible, and sensitive HPLC-ECD method was developed and validated for the determination of CPT in dosage forms. The method was successfully applied for the determination of CPT in commercial and developed formulations. Possible drug-excipient and excipient-excipient interactions were investigated prior to formulating CPT microcapsules because successful formulation of a stable and effective solid dosage form depends on careful selection of excipients. Nuclear magnetic resonance spectroscopy, Fourier transform infra-red spectroscopy (FT-IR), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used for the identification and purity testing of CPT and excipients. The studies revealed no thermal changes during stress testing of binary and whole mixtures which indicate absence of solid state interactions. There were no shifts, appearance and disappearance in the endothermic or exothermic peaks and on the change of other associated enthalpy values on thermal curves obtained with DSC method. Characteristic peaks for common functional groups in the FT-IR were present in all the mixtures indicating the absence of incompatibility. The techniques used in this study can be said to have been efficient in the characterization and evaluation of the drug and excipients. The technique of microencapsulation by oil-in-oil was used to prepare CPT microcapsules. The effects of polymer molecular weight, homogenizing speed on the particle size, flow properties, morphology, surface properties and release characteristics of the prepared CPT microcapsules were examined. In order to decrease the complexity of the analysis and reduce cost response surface methodology using best polynomial equations was successfully used to quantify the effect of the formulation variables and develop an optimized formulation thereby minimizing the number of experimental trials. There was a burst effect during the first stage of dissolution. Scanning electron microscopy (SEM) results indicated that the initial burst effect observed in drug release could be attributed to dissolution of CPT crystals present at the surface or embedded in the superficial layer of the matrix. During the preparation of microcapsules, the drug might have been trapped near the surface of the microcapsules and or might have diffused quickly through the porous surface. The release kinetics of CPT from most formulations followed Fickian diffusion mechanism. SEM photographs showed that diffusion took place through pores at the surface of the microcapsules. The Kopcha model diffusion and erosion terms showed predominance of diffusion relative to swelling or erosion throughout the entire test period. Drug release mechanism was also confirmed by Makoid-Banakar and Korsmeyer-Peppas models exponents which further support diffusion release mechanism in most formulations. The models postulate that the total of drug release is a summation of a couple of mechanisms; burst release, relaxation induced controlled-release and diffusional release. Inspection of the 2D contour and 3D response surfaces allowed the determination of the geometrical nature of the surfaces and further providing results about the interaction of the different variables used in central composite design (CCD). The wide variation indicated that the factor combinations resulted in different drug release rates. Lagrange, canonical and mathematical modelling were used to determine the nature of the stationery point of the models. This represented the optimal variables or stationery points where there is interaction in the experimental space. It is difficult to understand the shape of a fitted response by mere inspection of the algebraic polynomial when there are many independent variables in the model. Canonical and Lagrange analyses facilitated the interpretation of the surface plots after a mathematical transformation of the original variables into new variables. In conclusion, these results suggest the potential application of Eudragit® / Methocel® microcapsules as suitable sustained-release drug delivery system for CPT.
- Full Text:
- Date Issued: 2010
Comparison of the neuroprotective potential of theanine and minocycline
- Authors: Mpofu, Tariro Ann-Maureen
- Date: 2010 , 2010-09-20
- Subjects: Nervous system -- Degeneration -- Treatment , Tetracyclines , Antibiotics -- Side effects , Theanine -- Evaluation , Drugs -- Administration , Cerebrovascular disease -- Prevention
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3775 , http://hdl.handle.net/10962/d1003253 , Nervous system -- Degeneration -- Treatment , Tetracyclines , Antibiotics -- Side effects , Theanine -- Evaluation , Drugs -- Administration , Cerebrovascular disease -- Prevention
- Description: Stroke is one of the most common causes of disability and death worldwide. The most commonly experienced stroke in the clinical setting is focal ischaemia in which the middle cerebral artery (MCA) is occluded and leads to a complex series of various pathophysiological pathways that ultimately lead to neuronal cell death. Several studies have been conducted on various therapeutic agents in the search for a neuroprotective drug and various animal models have been used to carry out this research. While theanine, a component of green tea and minocycline, a tetracycline antibiotic, have been shown to possess some neuroprotective properties, the mechanisms by which these two agents carry out these effects still remains unclear. The objectives of this study were to investigate the mechanisms by which these drugs carry out these neuroprotective effects and their neuroprotective ability in a MCA occlusion model of focal ischaemia. Ischaemia leads to oxidative stress due to the imbalance of free radicals and the endogenous antioxidant defence system. An antioxidant assay using the stable 2, 2-diphenyl-1-picrylhydrazyl (DPPH●) radical was used to assess the antiradical properties of each drug. It was found that minocycline showed superior antioxidant activity in vitro when compared to theanine. Further studies on the drugs‟ ability to attenuate the Fenton reaction (in which iron catalyses the formation of reactive species) were elucidated using electrochemical analysis, UV/VIS studies, ferrozine and ferritin assays. It was found that minocycline, in contrast to theanine, was able to bind to iron ions and thus potentially prevent the participation of iron in metal catalysed radical reaction. The antioxidant activity of both drugs was further investigated by assessing their effect on cyanide-induced superoxide generation and quinolinic acid (QA)-induced lipid peroxidation (LP). Experimental evidence shows that both drugs had no significant effect on the generation of superoxide in vitro and that there was a significant decrease in LP for minocycline in vitro and theanine in vivo. The metal binding and antioxidant properties were postulated to be a possible mechanism through which these agents reduced lipid peroxidation. A study was conducted to determine the effects of the drugs on the biosynthesis of the neurotoxin, QA and it was found that minocycline increases the levels of holoenzyme activity of tryptophan-2, 3-dioxygenase (TDO) in vitro and that theanine reduces the levels of the same enzyme in vivo after treatment for 10 days. TDO is the enzyme that converts tryptophan to other products that enable enzymatic activity to change it to QA. Minocycline was thought to bring about this effect as it has been shown from preceding experimental studies that it is an effective reducing agent. Theanine on the other hand is hypothesised to bring about a reduction in holoenzyme activity by changing the binding of tryptophan to the enzyme or affecting the radicals that participate in the enzymatic degradation of tryptophan. A focal ischaemic model of stroke was induced by occluding the MCA. Histological examination of the hippocampus post -ischaemia shows a reduction in the size of the infarct after pre-treatment with minocycline only. A further study into the effects of the drugs on the generation of superoxide and on the levels of the endogenous glutathione after a stroke was carried out. Pre-treatment of the animals with either theanine or minocycline showed no significant effects on the generation of the radical species or of the endogenous antioxidant which ruled out these as a mechanism of neuroprotection of both drugs, post-ischaemia.The findings of this study provide novel information on the possible mechanisms by which both theanine and minocycline act to bring about neuroprotection. In particular in this study, pre-treatment with minocycline has shown promise in the focal ischaemic model of stroke.
- Full Text:
- Date Issued: 2010
- Authors: Mpofu, Tariro Ann-Maureen
- Date: 2010 , 2010-09-20
- Subjects: Nervous system -- Degeneration -- Treatment , Tetracyclines , Antibiotics -- Side effects , Theanine -- Evaluation , Drugs -- Administration , Cerebrovascular disease -- Prevention
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3775 , http://hdl.handle.net/10962/d1003253 , Nervous system -- Degeneration -- Treatment , Tetracyclines , Antibiotics -- Side effects , Theanine -- Evaluation , Drugs -- Administration , Cerebrovascular disease -- Prevention
- Description: Stroke is one of the most common causes of disability and death worldwide. The most commonly experienced stroke in the clinical setting is focal ischaemia in which the middle cerebral artery (MCA) is occluded and leads to a complex series of various pathophysiological pathways that ultimately lead to neuronal cell death. Several studies have been conducted on various therapeutic agents in the search for a neuroprotective drug and various animal models have been used to carry out this research. While theanine, a component of green tea and minocycline, a tetracycline antibiotic, have been shown to possess some neuroprotective properties, the mechanisms by which these two agents carry out these effects still remains unclear. The objectives of this study were to investigate the mechanisms by which these drugs carry out these neuroprotective effects and their neuroprotective ability in a MCA occlusion model of focal ischaemia. Ischaemia leads to oxidative stress due to the imbalance of free radicals and the endogenous antioxidant defence system. An antioxidant assay using the stable 2, 2-diphenyl-1-picrylhydrazyl (DPPH●) radical was used to assess the antiradical properties of each drug. It was found that minocycline showed superior antioxidant activity in vitro when compared to theanine. Further studies on the drugs‟ ability to attenuate the Fenton reaction (in which iron catalyses the formation of reactive species) were elucidated using electrochemical analysis, UV/VIS studies, ferrozine and ferritin assays. It was found that minocycline, in contrast to theanine, was able to bind to iron ions and thus potentially prevent the participation of iron in metal catalysed radical reaction. The antioxidant activity of both drugs was further investigated by assessing their effect on cyanide-induced superoxide generation and quinolinic acid (QA)-induced lipid peroxidation (LP). Experimental evidence shows that both drugs had no significant effect on the generation of superoxide in vitro and that there was a significant decrease in LP for minocycline in vitro and theanine in vivo. The metal binding and antioxidant properties were postulated to be a possible mechanism through which these agents reduced lipid peroxidation. A study was conducted to determine the effects of the drugs on the biosynthesis of the neurotoxin, QA and it was found that minocycline increases the levels of holoenzyme activity of tryptophan-2, 3-dioxygenase (TDO) in vitro and that theanine reduces the levels of the same enzyme in vivo after treatment for 10 days. TDO is the enzyme that converts tryptophan to other products that enable enzymatic activity to change it to QA. Minocycline was thought to bring about this effect as it has been shown from preceding experimental studies that it is an effective reducing agent. Theanine on the other hand is hypothesised to bring about a reduction in holoenzyme activity by changing the binding of tryptophan to the enzyme or affecting the radicals that participate in the enzymatic degradation of tryptophan. A focal ischaemic model of stroke was induced by occluding the MCA. Histological examination of the hippocampus post -ischaemia shows a reduction in the size of the infarct after pre-treatment with minocycline only. A further study into the effects of the drugs on the generation of superoxide and on the levels of the endogenous glutathione after a stroke was carried out. Pre-treatment of the animals with either theanine or minocycline showed no significant effects on the generation of the radical species or of the endogenous antioxidant which ruled out these as a mechanism of neuroprotection of both drugs, post-ischaemia.The findings of this study provide novel information on the possible mechanisms by which both theanine and minocycline act to bring about neuroprotection. In particular in this study, pre-treatment with minocycline has shown promise in the focal ischaemic model of stroke.
- Full Text:
- Date Issued: 2010
Investigations of the bioavailability/bioequivalence of topical corticosteroid formulations containing clobetasol propionate using the human skin blanching assay, tape stripping and microdialysis
- Authors: Au, Wai Ling
- Date: 2010
- Subjects: Adrenocortical hormones -- Bioavailability , Drugs -- Therapeutic equivalency , Adrenocortical hormones -- Effectiveness , Adrenocortical hormones -- Testing , Adrenocortical hormones -- Side effects , Transdermal medication
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3743 , http://hdl.handle.net/10962/d1003221 , Adrenocortical hormones -- Bioavailability , Drugs -- Therapeutic equivalency , Adrenocortical hormones -- Effectiveness , Adrenocortical hormones -- Testing , Adrenocortical hormones -- Side effects , Transdermal medication
- Description: Currently, clinical trials in patients are required by most regulatory authorities for the assessment of bioequivalence of topical products where the drug is not intended for systemic absorption. Hence there is a dire need for suitable methods for the assessment of bioavailability and bioequivalence of such products since clinical safety and efficacy studies are expensive, time-consuming and require very large numbers of patients. Except for topical corticosteroid products where the human skin blanching assay/vasoconstrictor assay has been approved by the US FDA for bioequivalence assessment of those products, no other method has been “officially” approved for use in those investigations. However, a few alternative methods such as tape stripping and microdialysis have been pursued and considered to have the potential for use in ioequivalence/bioavailability studies. The human skin blanching assay was used to assess the bioequivalence of commercially available topical products containing 0.05% clobetasol propionate. Both visual and chromameter data were obtained and a commercially available topical corticosteroid product, Dermovate® cream was used as both the “Test” and the “Reference” product. The results indicated that both visual and chromametric assessments were comparable to each other and that either could be used for the assessment of the bioequivalence of topical products containing clobetasol propionate. The screening procedure was optimized to identify potential “detectors” for inclusion in the bioequivalence studies. This resulted in fewer subjects being required in a bioequivalence pivotal study, still having the necessary power to confirm bioequivalence using the human skin blanching assay. Another objective of this research was to re-visit tape stripping and other possible alternative methods such as dermal microdialysis and to optimize these procedures for bioequivalence assessment of topical formulations where the drug is not intended for systemic absorption. In the past few decades, tape stripping has been used to investigate bioavailability/bioequivalence of various topical formulations. This technique involves the removal of the stratum corneum to assess drug penetration through the skin. A draft FDA guidance for tape stripping was initially published but was subsequently withdrawn due to high variability and poor reproducibility. This research project used an optimized tape stripping procedure to determine bioavailability and establish bioequivalence between three commercially available formulations containing 0.05 % m/m clobetasol propionate. Furthermore, tape stripping was validated by undertaking a study to assess the bioequivalence of a 0.05% topical cream formulation (Dermovate® cream) using the same cream as both the “Test” and “Reference” product, in which bioequivalence was confirmed. The findings highlight the potential of tape stripping as an alternative method for the assessment of bioequivalence of clobetasol propionate formulations and may possibly be extended for use in other topical products. Microdialysis is another useful technique that can assess the penetration of topically applied substances which diffuses through the stratum corneum and into the dermis. Microdialysis has previously been successfully used for in vivo bioavailability and bioequivalence assessments of topical formulations. However, the drugs which were under investigation were all hydrophilic in nature. A major problem with the use of microdialysis for the assessment of lipophilic substances is the binding/adherence of the substance to the membrane and other components of the microdialysis system. As a result, this necessitates the development of a microdialysis system which can be used to assess lipophilic drugs. Intralipid® 20% was investigated and successfully utilized as a perfusate to recover a lipophilic topical corticosteroid, clobetasol propionate, in microdialysis studies. Hence, the bioavailability of clobetasol propionate from an extemporaneous preparation was determined in healthy human volunteers using microdialysis. These findings indicate that in vivo microdialysis can be used to assess lipophilic drug penetration through the skin. A novel approach to investigate drug release from topical formulations containing 0.05% clobetasol propionate using in vitro microdialysis was also undertaken. The in vitro findings were found to be in agreement with the results obtained using tape stripping to assess bioequivalence of the same commercially available products, namely Dermovate® cream, Dovate® Cream and Dermovate® ointment. These results indicate the potential to correlate in vitro with in vivo data for bioequivalence assessment of such topical dosage forms.
- Full Text:
- Date Issued: 2010
- Authors: Au, Wai Ling
- Date: 2010
- Subjects: Adrenocortical hormones -- Bioavailability , Drugs -- Therapeutic equivalency , Adrenocortical hormones -- Effectiveness , Adrenocortical hormones -- Testing , Adrenocortical hormones -- Side effects , Transdermal medication
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3743 , http://hdl.handle.net/10962/d1003221 , Adrenocortical hormones -- Bioavailability , Drugs -- Therapeutic equivalency , Adrenocortical hormones -- Effectiveness , Adrenocortical hormones -- Testing , Adrenocortical hormones -- Side effects , Transdermal medication
- Description: Currently, clinical trials in patients are required by most regulatory authorities for the assessment of bioequivalence of topical products where the drug is not intended for systemic absorption. Hence there is a dire need for suitable methods for the assessment of bioavailability and bioequivalence of such products since clinical safety and efficacy studies are expensive, time-consuming and require very large numbers of patients. Except for topical corticosteroid products where the human skin blanching assay/vasoconstrictor assay has been approved by the US FDA for bioequivalence assessment of those products, no other method has been “officially” approved for use in those investigations. However, a few alternative methods such as tape stripping and microdialysis have been pursued and considered to have the potential for use in ioequivalence/bioavailability studies. The human skin blanching assay was used to assess the bioequivalence of commercially available topical products containing 0.05% clobetasol propionate. Both visual and chromameter data were obtained and a commercially available topical corticosteroid product, Dermovate® cream was used as both the “Test” and the “Reference” product. The results indicated that both visual and chromametric assessments were comparable to each other and that either could be used for the assessment of the bioequivalence of topical products containing clobetasol propionate. The screening procedure was optimized to identify potential “detectors” for inclusion in the bioequivalence studies. This resulted in fewer subjects being required in a bioequivalence pivotal study, still having the necessary power to confirm bioequivalence using the human skin blanching assay. Another objective of this research was to re-visit tape stripping and other possible alternative methods such as dermal microdialysis and to optimize these procedures for bioequivalence assessment of topical formulations where the drug is not intended for systemic absorption. In the past few decades, tape stripping has been used to investigate bioavailability/bioequivalence of various topical formulations. This technique involves the removal of the stratum corneum to assess drug penetration through the skin. A draft FDA guidance for tape stripping was initially published but was subsequently withdrawn due to high variability and poor reproducibility. This research project used an optimized tape stripping procedure to determine bioavailability and establish bioequivalence between three commercially available formulations containing 0.05 % m/m clobetasol propionate. Furthermore, tape stripping was validated by undertaking a study to assess the bioequivalence of a 0.05% topical cream formulation (Dermovate® cream) using the same cream as both the “Test” and “Reference” product, in which bioequivalence was confirmed. The findings highlight the potential of tape stripping as an alternative method for the assessment of bioequivalence of clobetasol propionate formulations and may possibly be extended for use in other topical products. Microdialysis is another useful technique that can assess the penetration of topically applied substances which diffuses through the stratum corneum and into the dermis. Microdialysis has previously been successfully used for in vivo bioavailability and bioequivalence assessments of topical formulations. However, the drugs which were under investigation were all hydrophilic in nature. A major problem with the use of microdialysis for the assessment of lipophilic substances is the binding/adherence of the substance to the membrane and other components of the microdialysis system. As a result, this necessitates the development of a microdialysis system which can be used to assess lipophilic drugs. Intralipid® 20% was investigated and successfully utilized as a perfusate to recover a lipophilic topical corticosteroid, clobetasol propionate, in microdialysis studies. Hence, the bioavailability of clobetasol propionate from an extemporaneous preparation was determined in healthy human volunteers using microdialysis. These findings indicate that in vivo microdialysis can be used to assess lipophilic drug penetration through the skin. A novel approach to investigate drug release from topical formulations containing 0.05% clobetasol propionate using in vitro microdialysis was also undertaken. The in vitro findings were found to be in agreement with the results obtained using tape stripping to assess bioequivalence of the same commercially available products, namely Dermovate® cream, Dovate® Cream and Dermovate® ointment. These results indicate the potential to correlate in vitro with in vivo data for bioequivalence assessment of such topical dosage forms.
- Full Text:
- Date Issued: 2010
Bioethanol production from waste paper through fungal biotechnology
- Authors: Voigt, Paul George
- Date: 2010
- Subjects: Biomass energy , Cellulose -- Biodegradation , Waste paper -- Recycling , Biomass chemicals -- Economic aspects , Renewable energy sources , Fungi -- Biotechnology , Enzymes -- Biotechnology
- Language: English
- Type: Thesis , MSc , Masters
- Identifier: vital:3861 , http://hdl.handle.net/10962/d1013447
- Description: Bioethanol is likely to be a large contributor to the fuel sector of industry in the near future. Current research trends are geared towards utilizing food crops as substrate for bioethanol fermentation; however, this is the source of much controversy. Utilizing food crops for fuel purposes is anticipated to cause massive food shortages worldwide. Cellulose is the most abundant renewable resource on earth and is subject to a wide array of scientific study in order to utilize the glucose contained within it. Waste paper has a high degree of cellulose associated with it, which makes it an ideal target for cellulose biotechnology with the ultimate end goal of bioethanol production. This study focussed on producing the necessary enzymes to hydrolyse the cellulose found in waste paper and using the sugars produced to produce ethanol. The effects of various printing inks had on the production of sugars and the total envirorunental impact of the effluents produced during the production line were also examined. It was found that the fungus Trichoderma longibrachiatum DSM 769 grown in Mandel's medium with waste newspaper as the sole carbon source at 28 °C for 6 days produced extracellular cellulase enzymes with an activity of 0.203 ± 0.009 FPU.ml⁻¹, significantly higher activity as compared to other paper sources. This extracellular cellulase was used to hydrolyse waste newspaper and office paper, with office paper yielding the highest degree of sugar production with an end concentration of 5.80 ± 0.19 g/1 at 40 °C. Analysis by HPLC showed that although glucose was the major product at 4.35 ± 0.12 g/1, cellobiose was also produced in appreciable amounts (1.97 ± 0.71 g/1). The sugar solution was used as a substrate for Saccharomyces cerevisiae DSM 1333 and ethanol was produced at a level of 1.79 ± 0.26 g/1, the presence of which was confirmed by a 600 MHz NMR spectrum. It was found that cellobiose was not fermented by this strain of S. cerevisiae. Certain components of inks (the PAHs phenanthrene and naphthalene) were found to have a slight inhibitory effect (approximately 15% decrease) on the cellulase enzymes at very high concentrations (approximately 600 μg/1 in aqueous medium), while anthracene had no effect. Whole newsprint ink was shown not to sorb glucose. The environmental analysis of the effluents produced showed that in order for the effluents to be discharged into an aqueous ecosystem they would have to be diluted up to 200 times. They were also shown to have the potential to cause severe machinery damage if reused without proper treatment.
- Full Text:
- Date Issued: 2010
- Authors: Voigt, Paul George
- Date: 2010
- Subjects: Biomass energy , Cellulose -- Biodegradation , Waste paper -- Recycling , Biomass chemicals -- Economic aspects , Renewable energy sources , Fungi -- Biotechnology , Enzymes -- Biotechnology
- Language: English
- Type: Thesis , MSc , Masters
- Identifier: vital:3861 , http://hdl.handle.net/10962/d1013447
- Description: Bioethanol is likely to be a large contributor to the fuel sector of industry in the near future. Current research trends are geared towards utilizing food crops as substrate for bioethanol fermentation; however, this is the source of much controversy. Utilizing food crops for fuel purposes is anticipated to cause massive food shortages worldwide. Cellulose is the most abundant renewable resource on earth and is subject to a wide array of scientific study in order to utilize the glucose contained within it. Waste paper has a high degree of cellulose associated with it, which makes it an ideal target for cellulose biotechnology with the ultimate end goal of bioethanol production. This study focussed on producing the necessary enzymes to hydrolyse the cellulose found in waste paper and using the sugars produced to produce ethanol. The effects of various printing inks had on the production of sugars and the total envirorunental impact of the effluents produced during the production line were also examined. It was found that the fungus Trichoderma longibrachiatum DSM 769 grown in Mandel's medium with waste newspaper as the sole carbon source at 28 °C for 6 days produced extracellular cellulase enzymes with an activity of 0.203 ± 0.009 FPU.ml⁻¹, significantly higher activity as compared to other paper sources. This extracellular cellulase was used to hydrolyse waste newspaper and office paper, with office paper yielding the highest degree of sugar production with an end concentration of 5.80 ± 0.19 g/1 at 40 °C. Analysis by HPLC showed that although glucose was the major product at 4.35 ± 0.12 g/1, cellobiose was also produced in appreciable amounts (1.97 ± 0.71 g/1). The sugar solution was used as a substrate for Saccharomyces cerevisiae DSM 1333 and ethanol was produced at a level of 1.79 ± 0.26 g/1, the presence of which was confirmed by a 600 MHz NMR spectrum. It was found that cellobiose was not fermented by this strain of S. cerevisiae. Certain components of inks (the PAHs phenanthrene and naphthalene) were found to have a slight inhibitory effect (approximately 15% decrease) on the cellulase enzymes at very high concentrations (approximately 600 μg/1 in aqueous medium), while anthracene had no effect. Whole newsprint ink was shown not to sorb glucose. The environmental analysis of the effluents produced showed that in order for the effluents to be discharged into an aqueous ecosystem they would have to be diluted up to 200 times. They were also shown to have the potential to cause severe machinery damage if reused without proper treatment.
- Full Text:
- Date Issued: 2010
The use of response surface methodology and artificial neural networks for the establishment of a design space for a sustained release salbutamol sulphate formulation
- Authors: Chaibva, Faith Anesu
- Date: 2010
- Subjects: Salbutamol sulphate Artificial intelligence -- Medical applications Neural networks (Computer science) Response surfaces (Statistics) Pharmaceutical biotechnology -- Quality contro Drugs -- Design Pharmacokinetics Drugs -- Dosage forms Drugs -- Controlled release
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3845 , http://hdl.handle.net/10962/d1010432
- Description: Quality by Design (QbD) is a systematic approach that has been recommended as suitable for the development of quality pharmaceutical products. The QbD approach commences with the definition of a quality target drug profile and predetermined objectives that are then used to direct the formulation development process with an emphasis on understanding the pharmaceutical science and manufacturing principles that apply to a product. The design space is directly linked to the use of QbD for formulation development and is a multidimensional combination and interaction of input variables and process parameters that have been demonstrated to provide an assurance of quality. The objective of these studies was to apply the principles of QbD as a framework for the optimisation of a sustained release (SR) formulation of salbutamol sulphate (SBS), and for the establishment of a design space using Response Surface Methodology (RSM) and Artificial Neural Networks (ANN). SBS is a short-acting ♭₂ agonist that is used for the management of asthma and chronic obstructive pulmonary disease (COPD). The use of a SR formulation of SBS may provide clinical benefits in the management of these respiratory disorders. Ashtalin®8 ER (Cipla Ltd., Mumbai, Maharashtra, India) was selected as a reference formulation for use in these studies. An Ishikawa or Cause and Effect diagram was used to determine the impact of formulation and process factors that have the potential to affect product quality. Key areas of concern that must be monitored include the raw materials, the manufacturing equipment and processes, and the analytical and assessment methods employed. The conditions in the laboratory and manufacturing processes were carefully monitored and recorded for any deviation from protocol, and equipment for assessment of dosage form performance, including dissolution equipment, balances and hardness testers, underwent regular maintenance. Preliminary studies to assess the potential utility of Methocel® Kl OOM, alone and in combination with other matrix forming polymers, revealed that the combination of this polymer with xanthan gum and Carbopol® has the potential to modulate the release of SBS at a specific rate, for a period of 12 hr. A central composite design using Methocel® KlOOM, xanthan gum, Carbopol® 974P and Surelease® as the granulating fluid was constructed to fully evaluate the impact of these formulation variables on the rate and extent of SBS release from manufactured formulations. The results revealed that although Methocel® KlOOM and xanthan gum had the greatest retardant effect on drug release, interactions between the polymers used in the study were also important determinants of the measureable responses. An ANN model was trained for optimisation using the data generated from a central composite study. The efficiency of the network was optimised by assessing the impact of the number of nodes in the hidden layer using a three layer Multi Layer Perceptron (MLP). The results revealed that a network with nine nodes in the hidden layer had the best predictive ability, suitable for application to formulation optimisation studies. Pharmaceutical optimisation was conducted using both the RSM and the trained ANN models. The results from the two optimisation procedures yielded two different formulation compositions that were subjected to in vitro dissolution testing using USP Apparatus 3. The results revealed that, although the formulation compositions that were derived from the optimisation procedures were different, both solutions gave reproducible results for which the dissolution profiles were indeed similar to that of the reference formulation. RSM and ANN were further investigated as possible means of establishing a design space for formulation compositions that would result in dosage forms that have similar in vitro release test profiles comparable to the reference product. Constraint plots were used to determine the bounds of the formulation variables that would result in the manufacture of dosage forms with the desired release profile. ANN simulations with hypothetical formulations that were generated within a small region of the experimental domain were investigated as a means of understanding the impact of varying the composition of the formulation on resultant dissolution profiles. Although both methods were suitable for the establishment of a design space, the use of ANN may be better suited for this purpose because of the manner in which ANN handles data. As more information about the behaviour of a formulation and its processes is generated during the product Iifecycle, ANN may be used to evaluate the impact of formulation and process variables on measureable responses. It is recommended that ANN may be suitable for the optimisation of pharmaceutical formulations and establishment of a design space in line with ICH Pharmaceutical Development [1], Quality Risk Management [2] and Pharmaceutical Quality Systems [3]
- Full Text:
- Date Issued: 2010
- Authors: Chaibva, Faith Anesu
- Date: 2010
- Subjects: Salbutamol sulphate Artificial intelligence -- Medical applications Neural networks (Computer science) Response surfaces (Statistics) Pharmaceutical biotechnology -- Quality contro Drugs -- Design Pharmacokinetics Drugs -- Dosage forms Drugs -- Controlled release
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:3845 , http://hdl.handle.net/10962/d1010432
- Description: Quality by Design (QbD) is a systematic approach that has been recommended as suitable for the development of quality pharmaceutical products. The QbD approach commences with the definition of a quality target drug profile and predetermined objectives that are then used to direct the formulation development process with an emphasis on understanding the pharmaceutical science and manufacturing principles that apply to a product. The design space is directly linked to the use of QbD for formulation development and is a multidimensional combination and interaction of input variables and process parameters that have been demonstrated to provide an assurance of quality. The objective of these studies was to apply the principles of QbD as a framework for the optimisation of a sustained release (SR) formulation of salbutamol sulphate (SBS), and for the establishment of a design space using Response Surface Methodology (RSM) and Artificial Neural Networks (ANN). SBS is a short-acting ♭₂ agonist that is used for the management of asthma and chronic obstructive pulmonary disease (COPD). The use of a SR formulation of SBS may provide clinical benefits in the management of these respiratory disorders. Ashtalin®8 ER (Cipla Ltd., Mumbai, Maharashtra, India) was selected as a reference formulation for use in these studies. An Ishikawa or Cause and Effect diagram was used to determine the impact of formulation and process factors that have the potential to affect product quality. Key areas of concern that must be monitored include the raw materials, the manufacturing equipment and processes, and the analytical and assessment methods employed. The conditions in the laboratory and manufacturing processes were carefully monitored and recorded for any deviation from protocol, and equipment for assessment of dosage form performance, including dissolution equipment, balances and hardness testers, underwent regular maintenance. Preliminary studies to assess the potential utility of Methocel® Kl OOM, alone and in combination with other matrix forming polymers, revealed that the combination of this polymer with xanthan gum and Carbopol® has the potential to modulate the release of SBS at a specific rate, for a period of 12 hr. A central composite design using Methocel® KlOOM, xanthan gum, Carbopol® 974P and Surelease® as the granulating fluid was constructed to fully evaluate the impact of these formulation variables on the rate and extent of SBS release from manufactured formulations. The results revealed that although Methocel® KlOOM and xanthan gum had the greatest retardant effect on drug release, interactions between the polymers used in the study were also important determinants of the measureable responses. An ANN model was trained for optimisation using the data generated from a central composite study. The efficiency of the network was optimised by assessing the impact of the number of nodes in the hidden layer using a three layer Multi Layer Perceptron (MLP). The results revealed that a network with nine nodes in the hidden layer had the best predictive ability, suitable for application to formulation optimisation studies. Pharmaceutical optimisation was conducted using both the RSM and the trained ANN models. The results from the two optimisation procedures yielded two different formulation compositions that were subjected to in vitro dissolution testing using USP Apparatus 3. The results revealed that, although the formulation compositions that were derived from the optimisation procedures were different, both solutions gave reproducible results for which the dissolution profiles were indeed similar to that of the reference formulation. RSM and ANN were further investigated as possible means of establishing a design space for formulation compositions that would result in dosage forms that have similar in vitro release test profiles comparable to the reference product. Constraint plots were used to determine the bounds of the formulation variables that would result in the manufacture of dosage forms with the desired release profile. ANN simulations with hypothetical formulations that were generated within a small region of the experimental domain were investigated as a means of understanding the impact of varying the composition of the formulation on resultant dissolution profiles. Although both methods were suitable for the establishment of a design space, the use of ANN may be better suited for this purpose because of the manner in which ANN handles data. As more information about the behaviour of a formulation and its processes is generated during the product Iifecycle, ANN may be used to evaluate the impact of formulation and process variables on measureable responses. It is recommended that ANN may be suitable for the optimisation of pharmaceutical formulations and establishment of a design space in line with ICH Pharmaceutical Development [1], Quality Risk Management [2] and Pharmaceutical Quality Systems [3]
- Full Text:
- Date Issued: 2010
Development and assessment of minocycline sustained release capsule formulations
- Sachikonye, Tinotenda Chipo Victoria
- Authors: Sachikonye, Tinotenda Chipo Victoria
- Date: 2010
- Subjects: Drugs -- Controlled release , Drugs -- Dosage forms , Capsules (Pharmacy) , Drugs -- Administration , Acne -- Treatment , Tetracyclines , Antibiotics -- Side effects
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3854 , http://hdl.handle.net/10962/d1013127
- Description: The use of minocycline for the treatment of a broad range of systemic infections and for severe acne has been associated with vestibular side effects. The severity of side effects may lead to poor adherence to therapy by patients. The use of sustained release formulations of minocycline that display slow dissolution of minocycline following administration may be beneficial in reducing the incidence and severity of side effects. Therefore, sustained release capsule dosage forms containing 100 mg minocycline (base) were manufactured and assessed for use as sustained release oral dosage forms of minocycline. Minocycline sustained release capsules were manufactured based on matrix technologies using hydroxypropylmethyl cellulose (HPMC) and Compritol® as release retarding polymers. The rate and extent of minocycline release from the capsules was evaluated using USP Apparatus 1 and samples were analysed using a validated High Performance Liquid Chromatographic (HPLC) method with ultraviolet (UV) detection. Differences in the rate and extent of minocycline release from formulations manufactured using HPMC or Compritol® were influenced by the concentration of polymer used in the formulations. The rate and extent of minocycline release was faster and greater when low concentrations of polymer were used in formulations. The effect of different excipients on the release pattern(s) of minocycline and particularly their potential to optimise minocycline release from experimental formulations was investigated. The use of diluents such as lactose and microcrystalline cellulose (MCC) revealed that lactose facilitated minocycline release when HPMC was used as the polymer matrix. In contrast, the use of lactose as diluent resulted in slower release of minocycline from Compritol® based formulations. The addition of sodium starch glycolate to HPMC based formulations resulted in slower release of minocycline than when no sodium starch glycolate was used. Compritol® based formulations were observed to release minocycline faster following addition of sodium starch glycolate and Poloxamer 188 to experimental formulations. In vitro dissolution profiles were compared to a target or reference profile using the difference and similarity factors, ƒ1 and ƒ2 , and a one way analysis of variance (ANOVA). In addition, the mechanism of minocycline release was elucidated following fitting of dissolution data to the Korsmeyer-Peppas, Higuchi and Zero order models. Minocycline release kinetics were best described by the Korsmeyer-Peppas model and the values of the release exponent, n (italics), revealed that drug release was a result of the combined effects of minocycline diffusion through matrices and erosion of the matrices. These in vitro dissolution profiles were better fit to the Higuchi model than to the Zero order model. Two formulations that displayed a fit to the Zero order model were identified for further studies as potential dosage forms for sustained release minocycline.
- Full Text:
- Date Issued: 2010
- Authors: Sachikonye, Tinotenda Chipo Victoria
- Date: 2010
- Subjects: Drugs -- Controlled release , Drugs -- Dosage forms , Capsules (Pharmacy) , Drugs -- Administration , Acne -- Treatment , Tetracyclines , Antibiotics -- Side effects
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3854 , http://hdl.handle.net/10962/d1013127
- Description: The use of minocycline for the treatment of a broad range of systemic infections and for severe acne has been associated with vestibular side effects. The severity of side effects may lead to poor adherence to therapy by patients. The use of sustained release formulations of minocycline that display slow dissolution of minocycline following administration may be beneficial in reducing the incidence and severity of side effects. Therefore, sustained release capsule dosage forms containing 100 mg minocycline (base) were manufactured and assessed for use as sustained release oral dosage forms of minocycline. Minocycline sustained release capsules were manufactured based on matrix technologies using hydroxypropylmethyl cellulose (HPMC) and Compritol® as release retarding polymers. The rate and extent of minocycline release from the capsules was evaluated using USP Apparatus 1 and samples were analysed using a validated High Performance Liquid Chromatographic (HPLC) method with ultraviolet (UV) detection. Differences in the rate and extent of minocycline release from formulations manufactured using HPMC or Compritol® were influenced by the concentration of polymer used in the formulations. The rate and extent of minocycline release was faster and greater when low concentrations of polymer were used in formulations. The effect of different excipients on the release pattern(s) of minocycline and particularly their potential to optimise minocycline release from experimental formulations was investigated. The use of diluents such as lactose and microcrystalline cellulose (MCC) revealed that lactose facilitated minocycline release when HPMC was used as the polymer matrix. In contrast, the use of lactose as diluent resulted in slower release of minocycline from Compritol® based formulations. The addition of sodium starch glycolate to HPMC based formulations resulted in slower release of minocycline than when no sodium starch glycolate was used. Compritol® based formulations were observed to release minocycline faster following addition of sodium starch glycolate and Poloxamer 188 to experimental formulations. In vitro dissolution profiles were compared to a target or reference profile using the difference and similarity factors, ƒ1 and ƒ2 , and a one way analysis of variance (ANOVA). In addition, the mechanism of minocycline release was elucidated following fitting of dissolution data to the Korsmeyer-Peppas, Higuchi and Zero order models. Minocycline release kinetics were best described by the Korsmeyer-Peppas model and the values of the release exponent, n (italics), revealed that drug release was a result of the combined effects of minocycline diffusion through matrices and erosion of the matrices. These in vitro dissolution profiles were better fit to the Higuchi model than to the Zero order model. Two formulations that displayed a fit to the Zero order model were identified for further studies as potential dosage forms for sustained release minocycline.
- Full Text:
- Date Issued: 2010
- «
- ‹
- 1
- ›
- »