Development and validation of in-process control test kits for biodiesel production
- Authors: Fibi, Pumza Oscarine
- Date: 2013
- Subjects: Biodiesel fuels -- South Africa , Biomass energy -- South Africa
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10416 , http://hdl.handle.net/10948/d1012645 , Biodiesel fuels -- South Africa , Biomass energy -- South Africa
- Description: The production of biodiesel from vegetable oils is not a new technology; it has been around since the 1950’s and both the research in terms of the different feedstock that can be used and the production of biodiesel has since been gaining momentum as there needs to be a new, sustainable and domestic alternative to petroleum fuels. These petroleum fuels pose enormous threats to the environment and therefore need to be replaced as they are mostly contributing to climate change and global warming not to mention the frequent price hikes which are crippling the South African economy. Biodiesel production using vegetable oils seems to be and is the future and a law has recently been passed which sanctions the production of biofuel locally.[1] South African fuel producers will instigate obligatory blending of fossil fuel with biofuel as the country moves to encourage investment in its biofuels sector. The production of biodiesel locally and the blending of biodiesel with other petroleum products will reduce the country’s dependence on imported fuel. The already established petrochemical companies like BP, Sasol and Engine are therefore mandated to purchase these biofuels if and when the biofuels meet the required South African National Standard (SANS) 1935 requirements. This is then where the challenge comes as most of these growing biofuel companies cannot afford to purchase testing equipment.The growing companiesthen discover upon completion of the biofuel manufacturing process that their product does not meet the required standard specification. The failure translates to a financial loss as the final product can possibly not be reworked. The aim of the project is then to assist these companies who are manufacturing biofuel, by providing them with in-house biofuel process methods which will allow for early detection, should there be a need to redo a step in the process and not wait until the completion of the production process. These in-house process-testing methods will range from pH determination, titration tests which will determine the soap content and the percentage free fatty acid content, water determination, density and visual testing. It is not cost-effective for these biodiesel manufacturers to send their samples for outsource testing as evidently the results obtained would be out of specification hence the need to provide these biodiesel manufacturers with in-house analytical testing techniques that will aid in monitoring of the biodiesel production.
- Full Text:
- Date Issued: 2013
- Authors: Fibi, Pumza Oscarine
- Date: 2013
- Subjects: Biodiesel fuels -- South Africa , Biomass energy -- South Africa
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10416 , http://hdl.handle.net/10948/d1012645 , Biodiesel fuels -- South Africa , Biomass energy -- South Africa
- Description: The production of biodiesel from vegetable oils is not a new technology; it has been around since the 1950’s and both the research in terms of the different feedstock that can be used and the production of biodiesel has since been gaining momentum as there needs to be a new, sustainable and domestic alternative to petroleum fuels. These petroleum fuels pose enormous threats to the environment and therefore need to be replaced as they are mostly contributing to climate change and global warming not to mention the frequent price hikes which are crippling the South African economy. Biodiesel production using vegetable oils seems to be and is the future and a law has recently been passed which sanctions the production of biofuel locally.[1] South African fuel producers will instigate obligatory blending of fossil fuel with biofuel as the country moves to encourage investment in its biofuels sector. The production of biodiesel locally and the blending of biodiesel with other petroleum products will reduce the country’s dependence on imported fuel. The already established petrochemical companies like BP, Sasol and Engine are therefore mandated to purchase these biofuels if and when the biofuels meet the required South African National Standard (SANS) 1935 requirements. This is then where the challenge comes as most of these growing biofuel companies cannot afford to purchase testing equipment.The growing companiesthen discover upon completion of the biofuel manufacturing process that their product does not meet the required standard specification. The failure translates to a financial loss as the final product can possibly not be reworked. The aim of the project is then to assist these companies who are manufacturing biofuel, by providing them with in-house biofuel process methods which will allow for early detection, should there be a need to redo a step in the process and not wait until the completion of the production process. These in-house process-testing methods will range from pH determination, titration tests which will determine the soap content and the percentage free fatty acid content, water determination, density and visual testing. It is not cost-effective for these biodiesel manufacturers to send their samples for outsource testing as evidently the results obtained would be out of specification hence the need to provide these biodiesel manufacturers with in-house analytical testing techniques that will aid in monitoring of the biodiesel production.
- Full Text:
- Date Issued: 2013
Study of the skincalm filling process at Aspen Pharmacare applying some six sigma principles
- Authors: Marx, Johannes
- Date: 2005
- Subjects: Ointments -- Packaging , Six sigma (Quality control standard)
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10369 , http://hdl.handle.net/10948/184 , Ointments -- Packaging , Six sigma (Quality control standard)
- Description: Aspen Pharmacare is listed on the Johannesburg Securities Exchange South Africa (JSE) and is Africa’s largest pharmaceutical manufacturer. The company is a major supplier of branded pharmaceutical and healthcare products to the local and selected international markets. For decades, Aspen has manufactured a basket of affordable, quality, and effective products for the ethical, generic over-the-counter (OTC) and personal care markets. Aspen is also the leading supplier of generic medicines to the public sector, providing comprehensive coverage of the products on the Essential Drug List. Aspen continues to deliver on its commitment toward playing a role in social responsibility diseases such as HIV/AIDS, tuberculosis and malaria. In August 2003 Aspen developed Africa’s first generic anti-retroviral drug, namely Aspen-Stavudine. Aspen’s manufacturing facilities are based in Port Elizabeth (PE) and East London. Aspen has recently completed an Oral Solid Dosage (OSD) manufacturing facility worth approximately R150 million in PE. The Group manufactures approximately 20 tons of product daily and in excess of 400 tons of solid dosage pharmaceuticals, which equates to more than 2 billion tablets. In addition, more than 3 million litres of liquid pharmaceuticals and over 200 tons of pharmaceutical creams and ointments are produced per year [1]. Aspen excels at delivering quality products and services, exceeding customer expectations, complying with international standards in an environment that cultivates technical expertise and innovation. Following this philosophy through to the shop floor areas mean that there are always initiatives in continuous production improvement. One of these improvement projects introduced is called Six Sigma. 8 Ten members of the staff, selected from different expertise fields in the company were trained in Six Sigma. Knowledge gained from the two week training course were applied to different areas in the factory using Six Sigma principles. This dissertation focuses on the study undertaken in one of production areas, namely the filling process of the ointments and creams at the Aspen Port Elizabeth facility.
- Full Text:
- Date Issued: 2005
- Authors: Marx, Johannes
- Date: 2005
- Subjects: Ointments -- Packaging , Six sigma (Quality control standard)
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10369 , http://hdl.handle.net/10948/184 , Ointments -- Packaging , Six sigma (Quality control standard)
- Description: Aspen Pharmacare is listed on the Johannesburg Securities Exchange South Africa (JSE) and is Africa’s largest pharmaceutical manufacturer. The company is a major supplier of branded pharmaceutical and healthcare products to the local and selected international markets. For decades, Aspen has manufactured a basket of affordable, quality, and effective products for the ethical, generic over-the-counter (OTC) and personal care markets. Aspen is also the leading supplier of generic medicines to the public sector, providing comprehensive coverage of the products on the Essential Drug List. Aspen continues to deliver on its commitment toward playing a role in social responsibility diseases such as HIV/AIDS, tuberculosis and malaria. In August 2003 Aspen developed Africa’s first generic anti-retroviral drug, namely Aspen-Stavudine. Aspen’s manufacturing facilities are based in Port Elizabeth (PE) and East London. Aspen has recently completed an Oral Solid Dosage (OSD) manufacturing facility worth approximately R150 million in PE. The Group manufactures approximately 20 tons of product daily and in excess of 400 tons of solid dosage pharmaceuticals, which equates to more than 2 billion tablets. In addition, more than 3 million litres of liquid pharmaceuticals and over 200 tons of pharmaceutical creams and ointments are produced per year [1]. Aspen excels at delivering quality products and services, exceeding customer expectations, complying with international standards in an environment that cultivates technical expertise and innovation. Following this philosophy through to the shop floor areas mean that there are always initiatives in continuous production improvement. One of these improvement projects introduced is called Six Sigma. 8 Ten members of the staff, selected from different expertise fields in the company were trained in Six Sigma. Knowledge gained from the two week training course were applied to different areas in the factory using Six Sigma principles. This dissertation focuses on the study undertaken in one of production areas, namely the filling process of the ointments and creams at the Aspen Port Elizabeth facility.
- Full Text:
- Date Issued: 2005
Dispersal of sterile false codling moth, Thaumatotibia leucotreta (Meyrick) (Lepidoptera: Tortricidae), for a sterile insect technique programme on citrus
- Authors: Wagenaar, Gideon Daniel
- Date: 2015
- Subjects: Cryptophlebia leucotreta , Insect pests -- Control -- South Africa , Citrus -- Diseases and pests -- Control -- South Africa , Insect sterilization
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/4977 , vital:20774
- Description: The false codling moth (FCM), Thaumatotibia leucotreta (Meyrick) (Lepidoptera: Tortricidae), is an important pest of citrus in South Africa and challenging to manage due to its inconspicuous nature. An effective method currently being employed for the area-wide suppression of the FCM is the Sterile Insect Technique (SIT) and the effective dispersal of sterile moths is very important for success with SIT. This study was conducted in the Addo area of the Sundays River Valley (Eastern Cape) where the programme is commercially used. In this study, sterile male moths were released in different orchards on a citrus farm, and in nearby veld at different times of the year, and their dispersal was monitored through the use of pheromone traps. Various climatic factors were monitored. This provided insight into the local dispersal of sterile male FCM adults in response to abiotic cues (particularly climatic factors). The movement of the FCM in four citrus cultivars, namely lemons, navel and Valencia oranges and mandarins and in the nearby veld (open field), was determined at six different stages of the year. Results clearly indicated that sterile FCM movement is concentrated within citrus orchards, as very few moths were trapped beyond 30 m from the release point, particularly in navel and Valencia orchards. Of the climatic factors measured, minimum and maximum temperatures had the most significant influence on FCM dispersal, and based on the results, various recommendations are made for the releases of sterile FCM in an area-wide SIT management programmes on citrus. A better understanding of the dispersal capabilities of the FCM in an agricultural system, under different conditions and at different times of the year, is invaluable not only in improving release strategies in an SIT programme but in planning future control strategies against the FCM.
- Full Text:
- Date Issued: 2015
- Authors: Wagenaar, Gideon Daniel
- Date: 2015
- Subjects: Cryptophlebia leucotreta , Insect pests -- Control -- South Africa , Citrus -- Diseases and pests -- Control -- South Africa , Insect sterilization
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/4977 , vital:20774
- Description: The false codling moth (FCM), Thaumatotibia leucotreta (Meyrick) (Lepidoptera: Tortricidae), is an important pest of citrus in South Africa and challenging to manage due to its inconspicuous nature. An effective method currently being employed for the area-wide suppression of the FCM is the Sterile Insect Technique (SIT) and the effective dispersal of sterile moths is very important for success with SIT. This study was conducted in the Addo area of the Sundays River Valley (Eastern Cape) where the programme is commercially used. In this study, sterile male moths were released in different orchards on a citrus farm, and in nearby veld at different times of the year, and their dispersal was monitored through the use of pheromone traps. Various climatic factors were monitored. This provided insight into the local dispersal of sterile male FCM adults in response to abiotic cues (particularly climatic factors). The movement of the FCM in four citrus cultivars, namely lemons, navel and Valencia oranges and mandarins and in the nearby veld (open field), was determined at six different stages of the year. Results clearly indicated that sterile FCM movement is concentrated within citrus orchards, as very few moths were trapped beyond 30 m from the release point, particularly in navel and Valencia orchards. Of the climatic factors measured, minimum and maximum temperatures had the most significant influence on FCM dispersal, and based on the results, various recommendations are made for the releases of sterile FCM in an area-wide SIT management programmes on citrus. A better understanding of the dispersal capabilities of the FCM in an agricultural system, under different conditions and at different times of the year, is invaluable not only in improving release strategies in an SIT programme but in planning future control strategies against the FCM.
- Full Text:
- Date Issued: 2015
Process for the preparation of cis- AND trans-3,7-Dimethyl 2,6-Octadiene-1-OL from crude sulphated turpentine stream
- Sathikge, Ndavheleseni David
- Authors: Sathikge, Ndavheleseni David
- Date: 2008
- Subjects: Turpentine , Sulfate waste liquor , Wood-pulp industry -- By-products
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10398 , http://hdl.handle.net/10948/734 , Turpentine , Sulfate waste liquor , Wood-pulp industry -- By-products
- Description: As part of CSIR Biosciences’ interest in aroma chemicals, the processing of crude sulphated turpentine (CST) into high value aroma products was investigated. The primary target product, linalool, was obtained from a mixture of α- and β-pinene in four steps. It can be transformed into a wide range of high value added aroma chemicals. Isomerisation of linalool in the presence of a transition metal catalyst furnishes geraniol and nerol. The scientific work described in this report was part of a bigger project aimed at developing innovative processes to manufacture aroma, flavour & fragrance chemicals through beneficiation of industrial waste streams and other raw materials, available locally from the Forestry, Paper & Pulp industries. The evaluation of a process for the preparation of precursor aroma, flavour & fragrance compounds, in particular geraniol and nerol, from locally available raw materials and industrial waste streams, was investigated. Preparation of geraniol and nerol from linalool (ex α-pinene stream) was investigated using acids or organometallic complexes as catalysts for the corresponding isomerisation reaction. The investigation was conducted in an effort to find a less costly process utilising milder conditions than via the conventional cleavage of β-pinene to myrcene under extreme pyrolysis conditions (>650°C). The transformation of linalool to geraniol/nerol using mineral acids was found to be dominated by secondary reactions such as dehydration and cyclisation, resulting in poor product selectivities and yields. On the other hand, organometallic complexes, in particular vanadium-based complexes (e.g. (OV(OBu)3) produced satisfactory results in the preliminary assessment (conversion of 79.8 percent and selectivity of 98.3 percent). A set of statistically designed experiments was carried out on the (VO(BuO)3 + [(Bu)4N+]OH¯) catalyst system where three variables were tested, i.e. substrate concentration, temperature, and catalyst loading. The selected model for conversion was significant with the “Probability > F” being < 0.0001. The most important contributing variable to the model for conversion was temperature i.e. 83.9 percent. Temperature was still the most important variable for the selectivity response at 65.0 percent contribution level. The response surface generated for the selectivity response was flat indicating a robust method within the parameter range selected.
- Full Text:
- Date Issued: 2008
- Authors: Sathikge, Ndavheleseni David
- Date: 2008
- Subjects: Turpentine , Sulfate waste liquor , Wood-pulp industry -- By-products
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10398 , http://hdl.handle.net/10948/734 , Turpentine , Sulfate waste liquor , Wood-pulp industry -- By-products
- Description: As part of CSIR Biosciences’ interest in aroma chemicals, the processing of crude sulphated turpentine (CST) into high value aroma products was investigated. The primary target product, linalool, was obtained from a mixture of α- and β-pinene in four steps. It can be transformed into a wide range of high value added aroma chemicals. Isomerisation of linalool in the presence of a transition metal catalyst furnishes geraniol and nerol. The scientific work described in this report was part of a bigger project aimed at developing innovative processes to manufacture aroma, flavour & fragrance chemicals through beneficiation of industrial waste streams and other raw materials, available locally from the Forestry, Paper & Pulp industries. The evaluation of a process for the preparation of precursor aroma, flavour & fragrance compounds, in particular geraniol and nerol, from locally available raw materials and industrial waste streams, was investigated. Preparation of geraniol and nerol from linalool (ex α-pinene stream) was investigated using acids or organometallic complexes as catalysts for the corresponding isomerisation reaction. The investigation was conducted in an effort to find a less costly process utilising milder conditions than via the conventional cleavage of β-pinene to myrcene under extreme pyrolysis conditions (>650°C). The transformation of linalool to geraniol/nerol using mineral acids was found to be dominated by secondary reactions such as dehydration and cyclisation, resulting in poor product selectivities and yields. On the other hand, organometallic complexes, in particular vanadium-based complexes (e.g. (OV(OBu)3) produced satisfactory results in the preliminary assessment (conversion of 79.8 percent and selectivity of 98.3 percent). A set of statistically designed experiments was carried out on the (VO(BuO)3 + [(Bu)4N+]OH¯) catalyst system where three variables were tested, i.e. substrate concentration, temperature, and catalyst loading. The selected model for conversion was significant with the “Probability > F” being < 0.0001. The most important contributing variable to the model for conversion was temperature i.e. 83.9 percent. Temperature was still the most important variable for the selectivity response at 65.0 percent contribution level. The response surface generated for the selectivity response was flat indicating a robust method within the parameter range selected.
- Full Text:
- Date Issued: 2008
The effect of different management practices on the feed intake and growth rate of ostrich chicks
- Kruger, Anna Christina Magdalena
- Authors: Kruger, Anna Christina Magdalena
- Date: 2008
- Subjects: Ostriches -- South Africa -- Growth
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10589 , http://hdl.handle.net/10948/834 , Ostriches -- South Africa -- Growth
- Description: Different management techniques were studied, at the Kromme Rhee Experimental Farm near Stellenbosch, in order to stimulate feed intake of ostrich chicks and to determine the effect on their growth rate. A first experiment was conducted to determine the effect of different dietary flavourants on the feed intake of ostrich chicks. Ostrich chicks (1-28 days of age), with no previous exposure to flavourants showed a strong preference for salty feed. Another experiment determined the effect of different colourants on the feed intake of ostrich chicks. Exposure of chicks to feed coloured artificially in different colours (green, red, blue and yellow) had no impact on the feed intake of ostrich chicks (1-28 days of age). Throughout the study the dry matter intake was the highest for the control diet, indicating that the provision of coloured feed to ostriches, as practised in this study, will not stimulate feed intake. The effect of feed processing and restriction of water availability for ostrich chicks was also examined. Extrusion reduced microbial counts in feed by 99.7 percent. Feed intake as well as average daily gain of chicks were lowered by both the pelleting and the extrusion process practised in this study. Processing did not have a positive influence on the production of ostrich chicks 6-15 weeks of age. Dry matter intake for chicks subjected to water restriction were the same as for birds receiving water ad libitum. Similarly growth rate as well as feed conversion ratio was not effected by restriction of water, as practised in this study. Another technique studied was to determine the effect of 24h artificial light on feed intake, growth and the behaviour of ostrich chicks (1-28 days of age). A Timeactivity budget revealed that chicks subjected to 24 hours of light spent more time eating (14.7 percent) than those subjected to normal day and night cycles (11.4 percent). In spite of this, no significant difference in feed intake, growth rate and feed conversion ratio was observed for ostrich chicks subjected to different light regimes. The effect of different dietary salt levels on the production of ostrich chicks (8-12 weeks of age) was also determined. The performance of chicks was the best on a diet with a salt inclusion of 1.4 percent.
- Full Text:
- Date Issued: 2008
- Authors: Kruger, Anna Christina Magdalena
- Date: 2008
- Subjects: Ostriches -- South Africa -- Growth
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10589 , http://hdl.handle.net/10948/834 , Ostriches -- South Africa -- Growth
- Description: Different management techniques were studied, at the Kromme Rhee Experimental Farm near Stellenbosch, in order to stimulate feed intake of ostrich chicks and to determine the effect on their growth rate. A first experiment was conducted to determine the effect of different dietary flavourants on the feed intake of ostrich chicks. Ostrich chicks (1-28 days of age), with no previous exposure to flavourants showed a strong preference for salty feed. Another experiment determined the effect of different colourants on the feed intake of ostrich chicks. Exposure of chicks to feed coloured artificially in different colours (green, red, blue and yellow) had no impact on the feed intake of ostrich chicks (1-28 days of age). Throughout the study the dry matter intake was the highest for the control diet, indicating that the provision of coloured feed to ostriches, as practised in this study, will not stimulate feed intake. The effect of feed processing and restriction of water availability for ostrich chicks was also examined. Extrusion reduced microbial counts in feed by 99.7 percent. Feed intake as well as average daily gain of chicks were lowered by both the pelleting and the extrusion process practised in this study. Processing did not have a positive influence on the production of ostrich chicks 6-15 weeks of age. Dry matter intake for chicks subjected to water restriction were the same as for birds receiving water ad libitum. Similarly growth rate as well as feed conversion ratio was not effected by restriction of water, as practised in this study. Another technique studied was to determine the effect of 24h artificial light on feed intake, growth and the behaviour of ostrich chicks (1-28 days of age). A Timeactivity budget revealed that chicks subjected to 24 hours of light spent more time eating (14.7 percent) than those subjected to normal day and night cycles (11.4 percent). In spite of this, no significant difference in feed intake, growth rate and feed conversion ratio was observed for ostrich chicks subjected to different light regimes. The effect of different dietary salt levels on the production of ostrich chicks (8-12 weeks of age) was also determined. The performance of chicks was the best on a diet with a salt inclusion of 1.4 percent.
- Full Text:
- Date Issued: 2008
A study of lanthanide complexes with di-2-pyridyl ligands
- Authors: Coetzee, Louis-Charl Cloete
- Date: 2016
- Subjects: Rare earth metals
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/4731 , vital:20659
- Description: The ligands di(2-pyridyl) ketone (DPK) and cis-1,2 di(2-pyridyl) ethylene (DPE) are N,N,Odonor ligands that can undergo nucleophilic addition and become more flexible for coordination. The reaction between the lanthanide thiocyanate salt and DPK gave rise to seven novel complexes of the general formula [Ln(NCS)3(DPKOH)3], where Ln = La, Ce, Nd, Eu, Tb, Dy and Ho. 1H NMR spectroscopy verified that the ligand underwent nucleophilic addition upon coordination. This was further confirmed using UV-Vis spectroscopy which showed a shift in the absorption bands due to conjugation of electrons within the pyridyl ring upon coordination. UV-Vis spectroscopy was also utilised to test the covalent character of the neodymium and holmium complexes. X-ray diffraction and IR spectroscopy showed that three DPK ligands coordinated bidentately through a pyridinic nitrogen and a hydroxyl oxygen, while three isothiocyanato molecules completed the coordination environment around each metal. Furthermore, X-ray diffraction also revealed that these complexes are isostructural, ninecoordinate and the polyhedron which encloses each ion is of trigonal tricapped prismatic shape with D3h symmetry. Micro-analysis on all the complexes, except lanthanum and holmium confirmed the molecular formulae produced from the crystallographic data of each complex. The reaction between the lanthanide thiocyanate salt and DPE produced poor quality crystals which could not be detected by X-ray diffraction. The lanthanide salts used for this reaction were lanthanum, neodymium, europium, dysprosium and holmium. Upon coordination, conductivity measurements detected the presence of lanthanide ions in each solution. 1H NMR and IR spectroscopic studies showed that the ethylenic moiety of DPE underwent nucleophilic addition upon coordination. UV-Vis spectroscopy further confirmed nucleophilic addition upon coordination due to shifts in absorption bands. IR spectroscopy verified the possibility of a bidentate coordination to each metal through a pyridinic nitrogen and a hydroxyl oxygen as well as a monodentate coordination through isothiocyanato ligands. A micro-analysis on all the complexes provided the molecular formulae that can best fit each complex. The effect of the solvent molecules on the bonding parameters of the lanthanum complex was investigated. An analysis of the results produced from crystallographic data revealed the presence of intermolecular forces which interacted and stabilised the complex.
- Full Text:
- Date Issued: 2016
- Authors: Coetzee, Louis-Charl Cloete
- Date: 2016
- Subjects: Rare earth metals
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/4731 , vital:20659
- Description: The ligands di(2-pyridyl) ketone (DPK) and cis-1,2 di(2-pyridyl) ethylene (DPE) are N,N,Odonor ligands that can undergo nucleophilic addition and become more flexible for coordination. The reaction between the lanthanide thiocyanate salt and DPK gave rise to seven novel complexes of the general formula [Ln(NCS)3(DPKOH)3], where Ln = La, Ce, Nd, Eu, Tb, Dy and Ho. 1H NMR spectroscopy verified that the ligand underwent nucleophilic addition upon coordination. This was further confirmed using UV-Vis spectroscopy which showed a shift in the absorption bands due to conjugation of electrons within the pyridyl ring upon coordination. UV-Vis spectroscopy was also utilised to test the covalent character of the neodymium and holmium complexes. X-ray diffraction and IR spectroscopy showed that three DPK ligands coordinated bidentately through a pyridinic nitrogen and a hydroxyl oxygen, while three isothiocyanato molecules completed the coordination environment around each metal. Furthermore, X-ray diffraction also revealed that these complexes are isostructural, ninecoordinate and the polyhedron which encloses each ion is of trigonal tricapped prismatic shape with D3h symmetry. Micro-analysis on all the complexes, except lanthanum and holmium confirmed the molecular formulae produced from the crystallographic data of each complex. The reaction between the lanthanide thiocyanate salt and DPE produced poor quality crystals which could not be detected by X-ray diffraction. The lanthanide salts used for this reaction were lanthanum, neodymium, europium, dysprosium and holmium. Upon coordination, conductivity measurements detected the presence of lanthanide ions in each solution. 1H NMR and IR spectroscopic studies showed that the ethylenic moiety of DPE underwent nucleophilic addition upon coordination. UV-Vis spectroscopy further confirmed nucleophilic addition upon coordination due to shifts in absorption bands. IR spectroscopy verified the possibility of a bidentate coordination to each metal through a pyridinic nitrogen and a hydroxyl oxygen as well as a monodentate coordination through isothiocyanato ligands. A micro-analysis on all the complexes provided the molecular formulae that can best fit each complex. The effect of the solvent molecules on the bonding parameters of the lanthanum complex was investigated. An analysis of the results produced from crystallographic data revealed the presence of intermolecular forces which interacted and stabilised the complex.
- Full Text:
- Date Issued: 2016
The effect of top dressing treatments on stolon weaning and keeping quality on two potato cultivars in the Gamtoos river valley
- Authors: Murray, Roger Benjamin
- Date: 2020
- Subjects: Plants -- Effect of nitrates on
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/48522 , vital:40884
- Description: Potatoes are an important crop in the Eastern Cape, and in South Africa as a whole, as a nutritious staple food. For consumers, they provide a quality, relatively low-priced form of carbohydrate and, for farmers, they are a valuable cash crop. The nutritional requirements of Solanum tuberosum L., in particular its nitrogen (N) needs, during cultivation is an aspect warranting further research. The Eastern Cape is a prime potato-producing region and, as such, is an appropriate and logical choice in terms of a suitable location for the required study. Improper farming practices with regards to improper fertilizer application techniques can adversely affect yields, and excessive application of fertilizer is fundamentally economically unsound, adverse towards the environment and potentially detrimental to the crop. It is therefore imperative that nutrients – and nitrogen in particular – are available to the crop in the correct quantities at the correct time. The objective of this dissertation was to accurately identify the nitrogen fertilizer needs of potatoes – with specific emphasis on whether or not nitrogen affects stolon growth and development. The potato cultivar used in the research trial was Mondial, which is a cultivar well-established in the region. Nitrogen applications needed to be closely monitored with regards to the total seasonal amount of nitrogen applied, the timing of applications and the amount applied at each application. Meaningful data accumulated from this study will help farmers in the area to accurately assess the efficiency of their farming operations. Excessive or insufficient plant nutrition affects tuber bulking and quality. The objective was to accurately identify this “sweet spot” (i.e. the optimal measure and timing) with regards to fertilization, especially nitrogen, while also taking into account various other factors that affect healthy tuber development and stolon formation. The untested assertion that prompted this study was that too much nitrogen adversely affects the number of stolons – and therefore, the number of tubers, since tubers grow from the stolons. It is generally accepted that too little N will adversely affect yields and yield potential will not be achieved, and that too much N will adversely affect yields, incur unnecessary costs and potentially degrade the environment. Optimum nitrogen application quantities were therefore identified, along with points at which deviations from optimum yields occurred. There were 8 distinct treatment combinations – namely: a rate of 150kg/ha, 250kg/ha, 350kg/ha and 450kg/ha – of nitrogen (N) throughout the growing season, administered at 2 different timings (hereafter referred to as the Application Timings). The applications of nitrogen were administered as follows: Application Timing 1 (50% N at planting : 25% N as Topdressing 1 : 25% N as Topdressing 2) and Application Timing 2 (75% N at planting : 12.5% N as Topdressing 1 : 12.5% N as Topdressing 2). The findings suggest that while nitrogen played a role in increasing yield, there was no conclusive evidence to suggest that stolons were weaned by excessive amounts of nitrogen throughout the growing season. The results obtained from statistical analysis showed that, between Application Timing 1 (50%:25%:25%) and Application Timing 2 (75%:12.5%:12.5%), neither split application timing was superior to the other in terms of tuber yield or effect on the average number of stolons when data from all three plantings were combined. In some instances, high stolon numbers were observed in the high N application plots. The highest stolon count in a single data collection in Planting 1 was in the 450kg/ha App. 1 plots in the 3rd data collection. The highest stolon count in a single data collection in Planting 2 was in the 250kg/ha App. 2 plots in the 2nd data collection. The highest stolon count in a single data collection was in the 350kg/ha App. 2 plots in the 3rd data collection. The conjecture that excessive nitrogen causes stolon weaning in potatoes was not supported by the findings of the experiments conducted in the three trial plantings which constituted this research study.
- Full Text:
- Date Issued: 2020
- Authors: Murray, Roger Benjamin
- Date: 2020
- Subjects: Plants -- Effect of nitrates on
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/48522 , vital:40884
- Description: Potatoes are an important crop in the Eastern Cape, and in South Africa as a whole, as a nutritious staple food. For consumers, they provide a quality, relatively low-priced form of carbohydrate and, for farmers, they are a valuable cash crop. The nutritional requirements of Solanum tuberosum L., in particular its nitrogen (N) needs, during cultivation is an aspect warranting further research. The Eastern Cape is a prime potato-producing region and, as such, is an appropriate and logical choice in terms of a suitable location for the required study. Improper farming practices with regards to improper fertilizer application techniques can adversely affect yields, and excessive application of fertilizer is fundamentally economically unsound, adverse towards the environment and potentially detrimental to the crop. It is therefore imperative that nutrients – and nitrogen in particular – are available to the crop in the correct quantities at the correct time. The objective of this dissertation was to accurately identify the nitrogen fertilizer needs of potatoes – with specific emphasis on whether or not nitrogen affects stolon growth and development. The potato cultivar used in the research trial was Mondial, which is a cultivar well-established in the region. Nitrogen applications needed to be closely monitored with regards to the total seasonal amount of nitrogen applied, the timing of applications and the amount applied at each application. Meaningful data accumulated from this study will help farmers in the area to accurately assess the efficiency of their farming operations. Excessive or insufficient plant nutrition affects tuber bulking and quality. The objective was to accurately identify this “sweet spot” (i.e. the optimal measure and timing) with regards to fertilization, especially nitrogen, while also taking into account various other factors that affect healthy tuber development and stolon formation. The untested assertion that prompted this study was that too much nitrogen adversely affects the number of stolons – and therefore, the number of tubers, since tubers grow from the stolons. It is generally accepted that too little N will adversely affect yields and yield potential will not be achieved, and that too much N will adversely affect yields, incur unnecessary costs and potentially degrade the environment. Optimum nitrogen application quantities were therefore identified, along with points at which deviations from optimum yields occurred. There were 8 distinct treatment combinations – namely: a rate of 150kg/ha, 250kg/ha, 350kg/ha and 450kg/ha – of nitrogen (N) throughout the growing season, administered at 2 different timings (hereafter referred to as the Application Timings). The applications of nitrogen were administered as follows: Application Timing 1 (50% N at planting : 25% N as Topdressing 1 : 25% N as Topdressing 2) and Application Timing 2 (75% N at planting : 12.5% N as Topdressing 1 : 12.5% N as Topdressing 2). The findings suggest that while nitrogen played a role in increasing yield, there was no conclusive evidence to suggest that stolons were weaned by excessive amounts of nitrogen throughout the growing season. The results obtained from statistical analysis showed that, between Application Timing 1 (50%:25%:25%) and Application Timing 2 (75%:12.5%:12.5%), neither split application timing was superior to the other in terms of tuber yield or effect on the average number of stolons when data from all three plantings were combined. In some instances, high stolon numbers were observed in the high N application plots. The highest stolon count in a single data collection in Planting 1 was in the 450kg/ha App. 1 plots in the 3rd data collection. The highest stolon count in a single data collection in Planting 2 was in the 250kg/ha App. 2 plots in the 2nd data collection. The highest stolon count in a single data collection was in the 350kg/ha App. 2 plots in the 3rd data collection. The conjecture that excessive nitrogen causes stolon weaning in potatoes was not supported by the findings of the experiments conducted in the three trial plantings which constituted this research study.
- Full Text:
- Date Issued: 2020
A study of the application of clinoptilolite as an ion exchange agent for selected metals in aqueous solution
- Authors: Dyeshana, Vuyokazi
- Date: 2012
- Subjects: Ion exchange , Clinoptilolite
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10419 , http://hdl.handle.net/10948/d1013257
- Description: The aim of this study was to establish whether samples of South African-mined clinoptilolite could be used to remove selected metal cations from aqueous solution. The clinoptilolite samples supplied, (by Pratley SA) were in four different particle sizes. Batch study results revealed a decrease in the initial metal concentration in samples that were in contact with clinoptilolite. The finer particle size clinoptilolite had a greater capacity to remove metal cations from aqueous solution. However, ion-exchange results from atomic absorption analysis showed that the larger particle sizes, removed more magnesium ions. Magnesium was the only ion investigated in this study that was present as an exchangeable ion in the Pratley clinoptilolite chemical formula, (MgCaNa2K2)2.5(AlO2)7(SiO2)30.21H2O. Results from the ion-exchange studies showed that the decreasing order of percentage metal removal at pH 3.00 was as follows: Pb > Ni > Cu > Fe > Mg. The mass of metal ions that accumulated on one gram of clinoptilolite as determined from the isotherms was calculated to be 6.16 mg/g for lead and 0.74 mg/g for copper. Data from the lead equilibrium studies were fitted into Langmuir and Freundlich equations and linear regression was used to calculate linearity coefficients for the isotherms. The results showed that the removal of lead ions by clinoptilolite is complex as both monolayer and multilayer adsorption occurs on a heterogeneous surface.
- Full Text:
- Date Issued: 2012
- Authors: Dyeshana, Vuyokazi
- Date: 2012
- Subjects: Ion exchange , Clinoptilolite
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10419 , http://hdl.handle.net/10948/d1013257
- Description: The aim of this study was to establish whether samples of South African-mined clinoptilolite could be used to remove selected metal cations from aqueous solution. The clinoptilolite samples supplied, (by Pratley SA) were in four different particle sizes. Batch study results revealed a decrease in the initial metal concentration in samples that were in contact with clinoptilolite. The finer particle size clinoptilolite had a greater capacity to remove metal cations from aqueous solution. However, ion-exchange results from atomic absorption analysis showed that the larger particle sizes, removed more magnesium ions. Magnesium was the only ion investigated in this study that was present as an exchangeable ion in the Pratley clinoptilolite chemical formula, (MgCaNa2K2)2.5(AlO2)7(SiO2)30.21H2O. Results from the ion-exchange studies showed that the decreasing order of percentage metal removal at pH 3.00 was as follows: Pb > Ni > Cu > Fe > Mg. The mass of metal ions that accumulated on one gram of clinoptilolite as determined from the isotherms was calculated to be 6.16 mg/g for lead and 0.74 mg/g for copper. Data from the lead equilibrium studies were fitted into Langmuir and Freundlich equations and linear regression was used to calculate linearity coefficients for the isotherms. The results showed that the removal of lead ions by clinoptilolite is complex as both monolayer and multilayer adsorption occurs on a heterogeneous surface.
- Full Text:
- Date Issued: 2012
The analysis of trace gas emissions from landfills
- Authors: Rubidge, Gletwyn Robert
- Date: 2000
- Subjects: Gases, Asphyxiating and poisonnous , Gases -- Analysis , Sanitation -- Environmental engineering
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10983 , http://hdl.handle.net/10948/d1006341 , Gases, Asphyxiating and poisonnous , Gases -- Analysis , Sanitation -- Environmental engineering
- Description: Numerous informal houses have been built on and adjacent to a landfill in iBayi, Port Elizabeth, South Africa, which accepted domestic and industrial waste. Formal housing surrounds most of the site at a greater distance - some 60 m, or further, from the landfill. Both formal and informally housed residents complain of odours, burning eyes, sore throats and headaches - symptoms which they believed were caused by the landfill. The landfill gas and ambient air were analyzed to classify and quantify the VOCs (volatile organic compounds) emitted and then to compare the quantitative data with recognised standards to establish if the residents are at risk. Eighteen target (potentially hazardous) VOCs were quantified. A wide variety of compounds were detected in both the ambient air and landfill gas. The results of the VOC analyses were similar to those of other workers in both the qualitative and quantitative studies. The concentrations of the VOCs were mostly lower than the TLV (threshold limit values) values, but exceeded the MRLs (minimum recommended levels). The combined concentrations of the VOC’s in the ambient air either approached or exceeded the limit values for combined exposure thus indicating that a potential health hazard exists. One third of the VOCs were detected in both the ambient air and the subsurface gas, however, external pollution sources also appear to contribute to the VOC concentrations ambient air. Dangerously high methane concentrations were repeatedly detected in the landfill gas amongst the informal houses. There was a vast improvement in the aesthetic qualities of the landfill since the disposal restriction to accept only domestic refuse and building rubble in July 1997. The ambient air was less odorous and landfill site littered. Fewer informal recyclers were present and their concomitant squabbling over valuables had almost vanished. The management of the iBayi landfill holds much room for improvement. There is potential for serious injury or even death if no action is taken to remedy the problems at the iBayi landfill. A holistic solution will have to be found to make the landfill a safe neighbour. Some complementary analyses (such as pH, heavy metal concentrations in the water and sediments etc.) were performed on the leachate and water surrounding the landfill.
- Full Text:
- Date Issued: 2000
- Authors: Rubidge, Gletwyn Robert
- Date: 2000
- Subjects: Gases, Asphyxiating and poisonnous , Gases -- Analysis , Sanitation -- Environmental engineering
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10983 , http://hdl.handle.net/10948/d1006341 , Gases, Asphyxiating and poisonnous , Gases -- Analysis , Sanitation -- Environmental engineering
- Description: Numerous informal houses have been built on and adjacent to a landfill in iBayi, Port Elizabeth, South Africa, which accepted domestic and industrial waste. Formal housing surrounds most of the site at a greater distance - some 60 m, or further, from the landfill. Both formal and informally housed residents complain of odours, burning eyes, sore throats and headaches - symptoms which they believed were caused by the landfill. The landfill gas and ambient air were analyzed to classify and quantify the VOCs (volatile organic compounds) emitted and then to compare the quantitative data with recognised standards to establish if the residents are at risk. Eighteen target (potentially hazardous) VOCs were quantified. A wide variety of compounds were detected in both the ambient air and landfill gas. The results of the VOC analyses were similar to those of other workers in both the qualitative and quantitative studies. The concentrations of the VOCs were mostly lower than the TLV (threshold limit values) values, but exceeded the MRLs (minimum recommended levels). The combined concentrations of the VOC’s in the ambient air either approached or exceeded the limit values for combined exposure thus indicating that a potential health hazard exists. One third of the VOCs were detected in both the ambient air and the subsurface gas, however, external pollution sources also appear to contribute to the VOC concentrations ambient air. Dangerously high methane concentrations were repeatedly detected in the landfill gas amongst the informal houses. There was a vast improvement in the aesthetic qualities of the landfill since the disposal restriction to accept only domestic refuse and building rubble in July 1997. The ambient air was less odorous and landfill site littered. Fewer informal recyclers were present and their concomitant squabbling over valuables had almost vanished. The management of the iBayi landfill holds much room for improvement. There is potential for serious injury or even death if no action is taken to remedy the problems at the iBayi landfill. A holistic solution will have to be found to make the landfill a safe neighbour. Some complementary analyses (such as pH, heavy metal concentrations in the water and sediments etc.) were performed on the leachate and water surrounding the landfill.
- Full Text:
- Date Issued: 2000
Factors influencing species richness, cover and composition of vegetation on Namaqualand quartz fields
- Authors: Van Tonder, Carlo
- Date: 2006
- Subjects: Plant diversity -- South Africa -- Namaqualand , Soil biology -- South Africa -- Namaqualand
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10752 , http://hdl.handle.net/10948/630 , Plant diversity -- South Africa -- Namaqualand , Soil biology -- South Africa -- Namaqualand
- Description: Quartz fields contribute significantly to plant diversity in the Succulent Karoo biome. They are distinctly different from surrounding habitats and have high levels of plant endemism. Biological soil crusts are features of quartz field soils and fulfill a vital function in that they stabilize soils. It is important for managers of nature reserves and agricultural rangelands to know what factors influence quartz field soils and vegetation. Both stakeholders could benefit from new information that would allow for informed decision-making regarding land-use on quartz fields. The present study took place in the Namaqua National Park that contains a significant proportion of the Riethuis-Wallekraal quartz fields phytochorion. The first part of the study aimed to understand whether certain land-use activities potentially destabilize quartz field soils, which might have possible ramifications for associated biological soil crusts and vegetation. It was followed by relating variation in soil stability with species richness, cover and species composition of quartz field vegetation. Overall, positions assumed to be impacted by land-use activities had less stable soils compared to positions assumed not be impacted. Soil stability had a significant influence on species richness and cover but to a lesser degree on species composition. Quartz field vegetation was significantly influenced by soil physical and chemical properties as well as location in the quartz fields landscape. The second part of the study aimed at understanding how species richness of isolated quartz outcrops is related to their size compared to that of a mainland body of quartz outcrops. No clear species-area relationships emerged from the study. There were significant differences between isolated outcrops and mainland outcrops in substrate and vegetation composition. Findings are discussed in relation to Island Biogeography Theory.
- Full Text:
- Date Issued: 2006
- Authors: Van Tonder, Carlo
- Date: 2006
- Subjects: Plant diversity -- South Africa -- Namaqualand , Soil biology -- South Africa -- Namaqualand
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10752 , http://hdl.handle.net/10948/630 , Plant diversity -- South Africa -- Namaqualand , Soil biology -- South Africa -- Namaqualand
- Description: Quartz fields contribute significantly to plant diversity in the Succulent Karoo biome. They are distinctly different from surrounding habitats and have high levels of plant endemism. Biological soil crusts are features of quartz field soils and fulfill a vital function in that they stabilize soils. It is important for managers of nature reserves and agricultural rangelands to know what factors influence quartz field soils and vegetation. Both stakeholders could benefit from new information that would allow for informed decision-making regarding land-use on quartz fields. The present study took place in the Namaqua National Park that contains a significant proportion of the Riethuis-Wallekraal quartz fields phytochorion. The first part of the study aimed to understand whether certain land-use activities potentially destabilize quartz field soils, which might have possible ramifications for associated biological soil crusts and vegetation. It was followed by relating variation in soil stability with species richness, cover and species composition of quartz field vegetation. Overall, positions assumed to be impacted by land-use activities had less stable soils compared to positions assumed not be impacted. Soil stability had a significant influence on species richness and cover but to a lesser degree on species composition. Quartz field vegetation was significantly influenced by soil physical and chemical properties as well as location in the quartz fields landscape. The second part of the study aimed at understanding how species richness of isolated quartz outcrops is related to their size compared to that of a mainland body of quartz outcrops. No clear species-area relationships emerged from the study. There were significant differences between isolated outcrops and mainland outcrops in substrate and vegetation composition. Findings are discussed in relation to Island Biogeography Theory.
- Full Text:
- Date Issued: 2006
The investigation of chemical variation in the stems and rhizomes of cissampelos capensis l. f. (menispermaceae) the Eastern Cape medicinal plant
- Authors: Latolla, Nehemiah Solomon
- Date: 2017
- Subjects: Plants -- Composition Medicinal plants Endemic plants
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/13970 , vital:27362
- Description: Cissampelos capensis L. f. (Menispermaceae) commonly known as “Mayisake” (Xhosa) and “Dawidjieswortel” (Afrikaans) is the most commonly used medicinal plant of the Menispermaceae family in South Africa. The rhizomes of Cissampelos capensis are the most used part of the plant to treat illnesses. This poses a threat to the ongoing conservation of this valuable endemic species. Thus, we studied the chemical variation and subsequently the bioactivity in the stems and rhizomes of Cissampelos capensis, the Eastern Cape medicinal plant, to suggest the possible use of the stems for medicinal purposes. We studied the variation in the chemical composition in the stems and the rhizomes by employing four different extraction methods; the methanolic-, non-polar-, alkaloidal- and Total Tertiary Alkaloidal (TTA) to extract compounds from Cissampelos capensis. Employing various chromatographic techniques, HPLC, NMR and LC/MS to investigate the chemical variation and the in vitro assays for the crude materials of the stems and rhizomes of Cissampelos capensis. We successfully documented a library of the phytochemicals content in Cissampelos capensis from three different regions in the Eastern Cape. We could profile different extraction methods, with the TTA extraction delivering the best comparative profile. Employing LC/MS and HPLC we identified eleven known alkaloidal compounds in the stems and rhizomes. We also isolated a known alkaloid, pronuciferine, from the TTA extract and a crystal structure of proto-quericitol from the methanolic extract, which was isolated for the first time from Cissampelos capensis. Preliminary in vitro results suggested anti-inflammatory activity in the methanolic extracts of the stems and rhizomes, while the TTA extracts showed some cytotoxicity. Finally, through analytical HPLC analysis this study found as high as 31% similarity between the chemical variation of the stems and rhizomes, but key alkaloids were not always present, indicating more work is needed before the stems can be recommended as a replacement for the rhizomes.
- Full Text:
- Date Issued: 2017
- Authors: Latolla, Nehemiah Solomon
- Date: 2017
- Subjects: Plants -- Composition Medicinal plants Endemic plants
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/13970 , vital:27362
- Description: Cissampelos capensis L. f. (Menispermaceae) commonly known as “Mayisake” (Xhosa) and “Dawidjieswortel” (Afrikaans) is the most commonly used medicinal plant of the Menispermaceae family in South Africa. The rhizomes of Cissampelos capensis are the most used part of the plant to treat illnesses. This poses a threat to the ongoing conservation of this valuable endemic species. Thus, we studied the chemical variation and subsequently the bioactivity in the stems and rhizomes of Cissampelos capensis, the Eastern Cape medicinal plant, to suggest the possible use of the stems for medicinal purposes. We studied the variation in the chemical composition in the stems and the rhizomes by employing four different extraction methods; the methanolic-, non-polar-, alkaloidal- and Total Tertiary Alkaloidal (TTA) to extract compounds from Cissampelos capensis. Employing various chromatographic techniques, HPLC, NMR and LC/MS to investigate the chemical variation and the in vitro assays for the crude materials of the stems and rhizomes of Cissampelos capensis. We successfully documented a library of the phytochemicals content in Cissampelos capensis from three different regions in the Eastern Cape. We could profile different extraction methods, with the TTA extraction delivering the best comparative profile. Employing LC/MS and HPLC we identified eleven known alkaloidal compounds in the stems and rhizomes. We also isolated a known alkaloid, pronuciferine, from the TTA extract and a crystal structure of proto-quericitol from the methanolic extract, which was isolated for the first time from Cissampelos capensis. Preliminary in vitro results suggested anti-inflammatory activity in the methanolic extracts of the stems and rhizomes, while the TTA extracts showed some cytotoxicity. Finally, through analytical HPLC analysis this study found as high as 31% similarity between the chemical variation of the stems and rhizomes, but key alkaloids were not always present, indicating more work is needed before the stems can be recommended as a replacement for the rhizomes.
- Full Text:
- Date Issued: 2017
Perceptions and practices of small-scale piggery farmers towards animal welfare in the Nelson Mandela Bay Metropole
- Authors: Maqhajana, Mzwanele
- Date: 2016
- Subjects: Animal welfare -- South Africa -- Nelson Mandela Bay Municipality , Farms, Small -- South Africa -- Nelson Mandela Bay Municipality
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/8079 , vital:24719
- Description: There has been an increasing concern about animal welfare in small-scale farming as the farmers' agricultural practices shift towards intensive agriculture. It has become important to comprehend how small-scale farmers perceive and practice animal welfare relative to production and market integration. To solve the research problem, the research emphasis was on assessing the following practices; procedures adopted by the small-scale farmers, welfare levels verses industry equirements for market integration; determinants affecting small-scale perceptions and attitudes towards animal welfare and how has animal welfare affected farm development and production. The research focus for this study was to investigate the linkage between perceptions and this process. In order to achieve a more in-depth understanding of the study while also ensuring its validity and correctness a triangulation research method was applied, which consisted of a quantitative and qualitative method approach. The focus groups and structured research interview questions were used as the main data collections instruments. The study consisted of sixty-two piggery small-scale farmers from three areas of the Nelson Mandela Bay metropole. The study found that there was a disparity between the perceptions and practice of small-scale farmers. Farmers perceived their practices as acceptable. However, on most of the farms the pigs were farmed in an unhygienic environment, had limited handling facilities, the farmers had unconventional methods to handle the pigs; there was poor support from technical services, many of the farmers never administered animal welfare evaluations and applied questionable feeding practices. The study also indicated that less than 15% had suitable facilities to accommodate suitable reproduction and piglet care. The researcher recommended the following interventions to improve animal welfare approaches with small-scale farmers in the Nelson Mandela Bay metropole: Training and information campaigns to improve small-scale piggery farmers' perception and knowledge of animal welfare, as well as market standards and requirements. Strengthening the relationship between the small-scale piggery farmers and animal welfare stakeholders. Including active engagement between small scale piggery farmers and the Department of Rural Development, Agrarian Reform and Urban Agriculture Unit of the Nelson Mandela Bay Municipality. Encouraging farmers to strive for stronger markets to facilitate better income and care of animals.
- Full Text:
- Date Issued: 2016
- Authors: Maqhajana, Mzwanele
- Date: 2016
- Subjects: Animal welfare -- South Africa -- Nelson Mandela Bay Municipality , Farms, Small -- South Africa -- Nelson Mandela Bay Municipality
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/8079 , vital:24719
- Description: There has been an increasing concern about animal welfare in small-scale farming as the farmers' agricultural practices shift towards intensive agriculture. It has become important to comprehend how small-scale farmers perceive and practice animal welfare relative to production and market integration. To solve the research problem, the research emphasis was on assessing the following practices; procedures adopted by the small-scale farmers, welfare levels verses industry equirements for market integration; determinants affecting small-scale perceptions and attitudes towards animal welfare and how has animal welfare affected farm development and production. The research focus for this study was to investigate the linkage between perceptions and this process. In order to achieve a more in-depth understanding of the study while also ensuring its validity and correctness a triangulation research method was applied, which consisted of a quantitative and qualitative method approach. The focus groups and structured research interview questions were used as the main data collections instruments. The study consisted of sixty-two piggery small-scale farmers from three areas of the Nelson Mandela Bay metropole. The study found that there was a disparity between the perceptions and practice of small-scale farmers. Farmers perceived their practices as acceptable. However, on most of the farms the pigs were farmed in an unhygienic environment, had limited handling facilities, the farmers had unconventional methods to handle the pigs; there was poor support from technical services, many of the farmers never administered animal welfare evaluations and applied questionable feeding practices. The study also indicated that less than 15% had suitable facilities to accommodate suitable reproduction and piglet care. The researcher recommended the following interventions to improve animal welfare approaches with small-scale farmers in the Nelson Mandela Bay metropole: Training and information campaigns to improve small-scale piggery farmers' perception and knowledge of animal welfare, as well as market standards and requirements. Strengthening the relationship between the small-scale piggery farmers and animal welfare stakeholders. Including active engagement between small scale piggery farmers and the Department of Rural Development, Agrarian Reform and Urban Agriculture Unit of the Nelson Mandela Bay Municipality. Encouraging farmers to strive for stronger markets to facilitate better income and care of animals.
- Full Text:
- Date Issued: 2016
Development of polypropylene – waste tyre crumbs based tpe's with the aid of vistamaxxtm as a compatibiliser
- Authors: Masele, Siyamtanda
- Date: 2019
- Subjects: Polymers , Polymerization Crumb rubber Rubber
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/42589 , vital:36670
- Description: Polypropylene (PP) is a semi crystalline thermoplastic polymer and one of the most commonly used polyolefins. It is well known for its poor impact resistance; hence, for industries such as the automotive and packaging, reinforced PP is widely used. In general plastic waste disposal is a global crisis raising environmental and human health concerns, with PP being the highest consumed polymer globally; hence a push in the reuse and recycling of PP. Recycled polypropylene has limited uses for industrial applications due to its highly reduced properties owing to the recycling process which inhabits cutting of chains lengths, broadened molecular weight distributions and compromised crystallinity. Several studies have investigated the use of reinforcing fillers and modifiers in order to improve properties of PP. Inorganic materials and minerals such as CaCO3, Mica, Talc and glass fibre are used as fillers to improve mechanical properties (tensile and hardness), but still lacks in improving the impact resistance. Thermoplastic elastomers (TPE) are typically used where elastomer and thermoplastics fail as individual components. This is because they have the benefit of thermoplastic properties at hypo ambient condition and elastomer properties such as good impact and elongation at sub-zero conditions. The study took a route of using PP and waste tyre crumb rubber (CR) material to prepare potentially low-cost waste based TPE’s, which would then inherit both properties of PP and the rubber component. VistamaxxTM 6202 (EPR), a commercial name for ethylene-propylene monomer (EPR), was used as a compatibiliser to improve interaction between PP and CR and to contribute towards the overall improvement of various properties such as mechanical properties. VistamaxxTM has a low glass transition temperature (Tg, = -30 ºC), which is important for low temperature applications such as cold storage; it also has a very high elongation and as a result contributed significantly to the overall properties when used in TPE blends. The study highlighted differences between two TPE compounding formulation pathways; namely master-batch (MB) and design of experiments (DoE). The MB formulations were blends that were prepared by a conventional way of compounding; where a pre-mixed CR/EPR blend, in the ratio of 80(CR):20(EPR), was used to form a master-batch. Results showed that there are some similarities between TPEs prepared in different ways, which suggests that the ultimate properties such as thermal stability are in fact more PP matrix based. Thermal analyses results revealed that when high amount of CR was added to the TPE blends, there was a substantial amount of residue mainly due to inherent carbon black. The degree of crystallinity of the blends decreased with increased amounts of CR irrespective of whether it was the MB or DoE blends. The MB TPE blends demonstrated that hardness is not linked to the amount of the MB nor the crystallinity of blends. Meanwhile, tensile elongation and tensile stress were affected by crystallinity. On the other hand, the impact strength findings showed that the amount of MB in TPE blends reached a threshold at 30%. The DoE based TPE blends demonstrated that the optimum mechanical properties are observed when components of the blends are incorporated individually during compounding. This was observed for impact strength, tensile stress as well as elongation at break. The results showed that the incorporation of EPR should be at least 20% for good impact and elongation properties; however, for tensile and hardness, the PP matrix must be high. The study also showed that, for better mechanical properties it was more suitable to use the blends formulated with DoE, because the master-batch approach limited the improving of the mechanical properties by an addition of up to 30% of both the CR and EPR. The storage modulus as well as the tan delta for both MB and DoE decreased when the elastomeric phases were added on both methods, whereas tan delta Tg values decreased as more of the elastomeric phase was added. Evidence from morphology studies showed that the majority of TPE blends suffer from inadequate distribution and adhesion between PP and elastomer; resulting in poor mechanical properties. Furthermore, a threshold of matrix invasion is observed from 30% and above of CR in the blend, where lack of in capsulated lamps of CR were observed hindering the stress induced crystallization and relaxation of the PP phase. The latter was observed irrespective of the type of blend, which strongly suggests and highlights the limits of blending PP with elastomers. Study demonstrated the ability of VistamaxxTM to be utilized as a binding material for PP and CR and displaying the challenges that might arise when used as a master-batch with crumb rubber.
- Full Text:
- Date Issued: 2019
- Authors: Masele, Siyamtanda
- Date: 2019
- Subjects: Polymers , Polymerization Crumb rubber Rubber
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/42589 , vital:36670
- Description: Polypropylene (PP) is a semi crystalline thermoplastic polymer and one of the most commonly used polyolefins. It is well known for its poor impact resistance; hence, for industries such as the automotive and packaging, reinforced PP is widely used. In general plastic waste disposal is a global crisis raising environmental and human health concerns, with PP being the highest consumed polymer globally; hence a push in the reuse and recycling of PP. Recycled polypropylene has limited uses for industrial applications due to its highly reduced properties owing to the recycling process which inhabits cutting of chains lengths, broadened molecular weight distributions and compromised crystallinity. Several studies have investigated the use of reinforcing fillers and modifiers in order to improve properties of PP. Inorganic materials and minerals such as CaCO3, Mica, Talc and glass fibre are used as fillers to improve mechanical properties (tensile and hardness), but still lacks in improving the impact resistance. Thermoplastic elastomers (TPE) are typically used where elastomer and thermoplastics fail as individual components. This is because they have the benefit of thermoplastic properties at hypo ambient condition and elastomer properties such as good impact and elongation at sub-zero conditions. The study took a route of using PP and waste tyre crumb rubber (CR) material to prepare potentially low-cost waste based TPE’s, which would then inherit both properties of PP and the rubber component. VistamaxxTM 6202 (EPR), a commercial name for ethylene-propylene monomer (EPR), was used as a compatibiliser to improve interaction between PP and CR and to contribute towards the overall improvement of various properties such as mechanical properties. VistamaxxTM has a low glass transition temperature (Tg, = -30 ºC), which is important for low temperature applications such as cold storage; it also has a very high elongation and as a result contributed significantly to the overall properties when used in TPE blends. The study highlighted differences between two TPE compounding formulation pathways; namely master-batch (MB) and design of experiments (DoE). The MB formulations were blends that were prepared by a conventional way of compounding; where a pre-mixed CR/EPR blend, in the ratio of 80(CR):20(EPR), was used to form a master-batch. Results showed that there are some similarities between TPEs prepared in different ways, which suggests that the ultimate properties such as thermal stability are in fact more PP matrix based. Thermal analyses results revealed that when high amount of CR was added to the TPE blends, there was a substantial amount of residue mainly due to inherent carbon black. The degree of crystallinity of the blends decreased with increased amounts of CR irrespective of whether it was the MB or DoE blends. The MB TPE blends demonstrated that hardness is not linked to the amount of the MB nor the crystallinity of blends. Meanwhile, tensile elongation and tensile stress were affected by crystallinity. On the other hand, the impact strength findings showed that the amount of MB in TPE blends reached a threshold at 30%. The DoE based TPE blends demonstrated that the optimum mechanical properties are observed when components of the blends are incorporated individually during compounding. This was observed for impact strength, tensile stress as well as elongation at break. The results showed that the incorporation of EPR should be at least 20% for good impact and elongation properties; however, for tensile and hardness, the PP matrix must be high. The study also showed that, for better mechanical properties it was more suitable to use the blends formulated with DoE, because the master-batch approach limited the improving of the mechanical properties by an addition of up to 30% of both the CR and EPR. The storage modulus as well as the tan delta for both MB and DoE decreased when the elastomeric phases were added on both methods, whereas tan delta Tg values decreased as more of the elastomeric phase was added. Evidence from morphology studies showed that the majority of TPE blends suffer from inadequate distribution and adhesion between PP and elastomer; resulting in poor mechanical properties. Furthermore, a threshold of matrix invasion is observed from 30% and above of CR in the blend, where lack of in capsulated lamps of CR were observed hindering the stress induced crystallization and relaxation of the PP phase. The latter was observed irrespective of the type of blend, which strongly suggests and highlights the limits of blending PP with elastomers. Study demonstrated the ability of VistamaxxTM to be utilized as a binding material for PP and CR and displaying the challenges that might arise when used as a master-batch with crumb rubber.
- Full Text:
- Date Issued: 2019
Optimization of a manufacturing process for atrazine with a focus on waste minimization
- Authors: Mtyopo, Mteteleli Bethwell
- Date: 2004
- Subjects: Waste minimization , Atrazine -- Environmental aspects
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10976 , http://hdl.handle.net/10948/259 , Waste minimization , Atrazine -- Environmental aspects
- Description: Chemical synthesis is not complete without waste treatment. There is no chemical process that does not produce waste. The untreated effluent discharged by chemical industries poses a major environmental concern. This dissertation describes the results of an investigation carried out on the formation of by-products (impurities) during the synthesis of atrazine by neutralization of the reaction mixture during the actual synthesis procedure, and prior to disposal using carbon dioxide or hydrochloric acid. The main objectives for the said investigation were: {u100083} To optimise the reaction parameters to obtain a higher yield and purity of atrazine. {u100083} To evaluate the use of carbon dioxide and hydrochloric acid to neutralise the reaction mixture. {u100083} To study the solids present in the effluent. Synthetic reactions were carried out in the presence of an organic solvent, methyl isobutyl ketone (MIBK). The synthesis of atrazine was optimised in terms of addition sequence and rates of amine reagents and base (proton acceptor) additions by means of bench scale reactions. It was found that addition of a neutralising step (hydrochloric acid or carbon dioxide) to neutralise the basic reaction mixture prior to and after addition of the secondary amine and the base minimizes the formation of by-products. Of particular importance in ensuring high yields and selectivity to the atrazine product was temperature control, pH control, reagent ratios, addition rates and mixing. The latter was important in view of the rapid reaction of amine/NaOH with cyanuric chloride, as well as the possible reaction of mono-i, the reaction intermediate, with IPA in cases of excesses of reagent. Under optimum conditions, an atrazine composition of >97% was achieved where the resultant product was well within stipulated product specifications.
- Full Text:
- Date Issued: 2004
- Authors: Mtyopo, Mteteleli Bethwell
- Date: 2004
- Subjects: Waste minimization , Atrazine -- Environmental aspects
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10976 , http://hdl.handle.net/10948/259 , Waste minimization , Atrazine -- Environmental aspects
- Description: Chemical synthesis is not complete without waste treatment. There is no chemical process that does not produce waste. The untreated effluent discharged by chemical industries poses a major environmental concern. This dissertation describes the results of an investigation carried out on the formation of by-products (impurities) during the synthesis of atrazine by neutralization of the reaction mixture during the actual synthesis procedure, and prior to disposal using carbon dioxide or hydrochloric acid. The main objectives for the said investigation were: {u100083} To optimise the reaction parameters to obtain a higher yield and purity of atrazine. {u100083} To evaluate the use of carbon dioxide and hydrochloric acid to neutralise the reaction mixture. {u100083} To study the solids present in the effluent. Synthetic reactions were carried out in the presence of an organic solvent, methyl isobutyl ketone (MIBK). The synthesis of atrazine was optimised in terms of addition sequence and rates of amine reagents and base (proton acceptor) additions by means of bench scale reactions. It was found that addition of a neutralising step (hydrochloric acid or carbon dioxide) to neutralise the basic reaction mixture prior to and after addition of the secondary amine and the base minimizes the formation of by-products. Of particular importance in ensuring high yields and selectivity to the atrazine product was temperature control, pH control, reagent ratios, addition rates and mixing. The latter was important in view of the rapid reaction of amine/NaOH with cyanuric chloride, as well as the possible reaction of mono-i, the reaction intermediate, with IPA in cases of excesses of reagent. Under optimum conditions, an atrazine composition of >97% was achieved where the resultant product was well within stipulated product specifications.
- Full Text:
- Date Issued: 2004
A comparison between the game and hunting industries in KwaZulu-Natal and the Eastern Cape
- Authors: Kobus, Louann
- Date: 2007
- Subjects: Big game hunting -- South Africa -- KwaZulu-Natal , Big game hunting -- South Africa -- Eastern Cape , Hunting -- South Africa -- KwaZulu-Natal , Hunting -- South Africa -- Eastern Cape , Game farms -- South Africa -- KwaZulu-Natal , Game farms -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10590 , http://hdl.handle.net/10948/534 , http://hdl.handle.net/10948/d1011724 , Big game hunting -- South Africa -- KwaZulu-Natal , Big game hunting -- South Africa -- Eastern Cape , Hunting -- South Africa -- KwaZulu-Natal , Hunting -- South Africa -- Eastern Cape , Game farms -- South Africa -- KwaZulu-Natal , Game farms -- South Africa -- Eastern Cape
- Description: The objectives of this research, were to investigate the characteristics and develop a profile of the game and hunting industries of KwaZulu-Natal, and to undertake a comparison between the game and hunting industries in KwaZulu-Natal and the Eastern Cape. The comparative part of this study was completed using results obtained from a study done in 2002 in the Eastern Cape (van Niekerk, 2002). The main farming activities in KwaZulu-Natal are large livestock production and sugar cane production. In recent years, private landowners in KwaZulu-Natal have undergone a transition from livestock production to game ranching due to the problems faced and the cost implications of the HIV epidemic, stock theft, difficulties faced with changes in the labour laws and the increasing number of land claims against farmers. Although the game and hunting industries are relatively young industries in KwaZulu-Natal they contribute significantly to the economy of the province. Not only is greater conservation of the biodiversity more effective in game ranching but it is also proving to yield great economic returns. The increase in game ranching in recent years is namely due to the monetary value placed on wildlife, the increased value in ecotourism and its value as an earner of foreign exchange, less dependency on unskilled labour than that of livestock farming and lower rates of animal loss through theft compared to that of livestock farming. In KwaZulu-Natal game numbers indicate that impala have the greatest population amongst the respondents, followed by nyala, blesbok, common reedbuck, kudu and blue wildebeest, whilst other game species occur in smaller numbers. Respondents in KwaZulu-Natal indicate that nyala is the largest economic earner for them followed by buffalo, whereas in the Eastern Cape (2002), kudu and springbok provide the greatest income for the province. In KwaZulu-Natal income generated from hunting is second to that of live game sales compared to the Eastern Cape (2002) where hunting is the most important form of game utilisation in terms of income generated. At the time of this study, respondents in KwaZulu-Natal reported an income of R 15 382 397 generated from live sales and R 13 561 459 from hunting. These respondents also indicated that the total value of game utilised annually was in excess of R 30 million. Although game utilisation is occurring on a sustainable basis, there is room for greater utilisation of some game species which, if undertaken correctly, can increase the revenue for the province significantly and also contribute positively to further sustainability of the game populations. KwaZulu-Natal’s competitive advantage is derived from the fact that there is an abundance of game on the ranches, quality trophy animals are available, the number of game species available for hunting and quality of service rendered to hunters by the professional hunters and ranch owners. This study has clearly shown that there is a need for further investigation into the game and hunting industries in KwaZulu-Natal.
- Full Text:
- Date Issued: 2007
- Authors: Kobus, Louann
- Date: 2007
- Subjects: Big game hunting -- South Africa -- KwaZulu-Natal , Big game hunting -- South Africa -- Eastern Cape , Hunting -- South Africa -- KwaZulu-Natal , Hunting -- South Africa -- Eastern Cape , Game farms -- South Africa -- KwaZulu-Natal , Game farms -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10590 , http://hdl.handle.net/10948/534 , http://hdl.handle.net/10948/d1011724 , Big game hunting -- South Africa -- KwaZulu-Natal , Big game hunting -- South Africa -- Eastern Cape , Hunting -- South Africa -- KwaZulu-Natal , Hunting -- South Africa -- Eastern Cape , Game farms -- South Africa -- KwaZulu-Natal , Game farms -- South Africa -- Eastern Cape
- Description: The objectives of this research, were to investigate the characteristics and develop a profile of the game and hunting industries of KwaZulu-Natal, and to undertake a comparison between the game and hunting industries in KwaZulu-Natal and the Eastern Cape. The comparative part of this study was completed using results obtained from a study done in 2002 in the Eastern Cape (van Niekerk, 2002). The main farming activities in KwaZulu-Natal are large livestock production and sugar cane production. In recent years, private landowners in KwaZulu-Natal have undergone a transition from livestock production to game ranching due to the problems faced and the cost implications of the HIV epidemic, stock theft, difficulties faced with changes in the labour laws and the increasing number of land claims against farmers. Although the game and hunting industries are relatively young industries in KwaZulu-Natal they contribute significantly to the economy of the province. Not only is greater conservation of the biodiversity more effective in game ranching but it is also proving to yield great economic returns. The increase in game ranching in recent years is namely due to the monetary value placed on wildlife, the increased value in ecotourism and its value as an earner of foreign exchange, less dependency on unskilled labour than that of livestock farming and lower rates of animal loss through theft compared to that of livestock farming. In KwaZulu-Natal game numbers indicate that impala have the greatest population amongst the respondents, followed by nyala, blesbok, common reedbuck, kudu and blue wildebeest, whilst other game species occur in smaller numbers. Respondents in KwaZulu-Natal indicate that nyala is the largest economic earner for them followed by buffalo, whereas in the Eastern Cape (2002), kudu and springbok provide the greatest income for the province. In KwaZulu-Natal income generated from hunting is second to that of live game sales compared to the Eastern Cape (2002) where hunting is the most important form of game utilisation in terms of income generated. At the time of this study, respondents in KwaZulu-Natal reported an income of R 15 382 397 generated from live sales and R 13 561 459 from hunting. These respondents also indicated that the total value of game utilised annually was in excess of R 30 million. Although game utilisation is occurring on a sustainable basis, there is room for greater utilisation of some game species which, if undertaken correctly, can increase the revenue for the province significantly and also contribute positively to further sustainability of the game populations. KwaZulu-Natal’s competitive advantage is derived from the fact that there is an abundance of game on the ranches, quality trophy animals are available, the number of game species available for hunting and quality of service rendered to hunters by the professional hunters and ranch owners. This study has clearly shown that there is a need for further investigation into the game and hunting industries in KwaZulu-Natal.
- Full Text:
- Date Issued: 2007
An evaluation of UPLC technology for the simultaneous analysis of actives in a multi-active drug
- Authors: Bawjee, Janita
- Date: 2011
- Subjects: High performance liquid chromatography
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10384 , http://hdl.handle.net/10948/d1008407 , High performance liquid chromatography
- Description: The evaluation of the potential to use Ultra Performance Liquid Chromatography (UPLC) for the simultaneous quantification of all the actives in a multi-active tablet is described in this work. Part of the evaluation was to ensure that the necessary regulatory requirements were adhered to by ascertaining that an analytical method is suitable for a specific purpose through analytical method validation for the specific multi-active tablet. The UPLC method was also tested for the analysis of similar products, namely tablet formulations that contain similar active ingredients in the same proportions but with an additional active ingredient. A method for the simultaneous determination of paracetamol, caffeine and codeine phosphate was developed using UPLC technology. The UPLC developed method was more efficient than the existing in-house HPLC method. The UPLC method was then validated in accordance to ICH and USP guidelines. The application of this UPLC method for the analysis of similar products containing paracetamol, caffeine, codeine phosphate and one extra active ingredient was very challenging. The low concentration of the additional component, differences in sample matrix and differences in formulations added to the challenges. The direct application for the analysis of products Y and Z was not successful; however the method could be used as a platform for further research. A cost comparison between the UPLC and HPLC methods showed the UPLC method to be more cost effective. Thus, while maintenance costs are higher for the UPLC instrument, column costs are comparable to HPLC columns, but solvent and waste disposal charges decrease considerably due to lower solvent use. The reduction in instrument time dramatically improves the cost effectiveness of UPLC over HPLC due to a concurrent reduction in analyst time requirement. The results of this study show that the analytical costs associated with the analysis of multi-active drugs using HPLC procedures can be reduced substantially by the CONFIDENTIAL INTELLECTUAL PROPERTY OF ASPEN PHARMACARE implementation of UPLC technology. The hypothesis that the enhanced chromatographic power of UPLC can be leveraged to provide faster analysis times hence increased product throughput rates, and lower operating costs for the analysis of multi-active drugs was accepted. These advantages were achieved whilst meeting all regulatory requirements for analytical methods as required by regulatory bodies.
- Full Text:
- Date Issued: 2011
- Authors: Bawjee, Janita
- Date: 2011
- Subjects: High performance liquid chromatography
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10384 , http://hdl.handle.net/10948/d1008407 , High performance liquid chromatography
- Description: The evaluation of the potential to use Ultra Performance Liquid Chromatography (UPLC) for the simultaneous quantification of all the actives in a multi-active tablet is described in this work. Part of the evaluation was to ensure that the necessary regulatory requirements were adhered to by ascertaining that an analytical method is suitable for a specific purpose through analytical method validation for the specific multi-active tablet. The UPLC method was also tested for the analysis of similar products, namely tablet formulations that contain similar active ingredients in the same proportions but with an additional active ingredient. A method for the simultaneous determination of paracetamol, caffeine and codeine phosphate was developed using UPLC technology. The UPLC developed method was more efficient than the existing in-house HPLC method. The UPLC method was then validated in accordance to ICH and USP guidelines. The application of this UPLC method for the analysis of similar products containing paracetamol, caffeine, codeine phosphate and one extra active ingredient was very challenging. The low concentration of the additional component, differences in sample matrix and differences in formulations added to the challenges. The direct application for the analysis of products Y and Z was not successful; however the method could be used as a platform for further research. A cost comparison between the UPLC and HPLC methods showed the UPLC method to be more cost effective. Thus, while maintenance costs are higher for the UPLC instrument, column costs are comparable to HPLC columns, but solvent and waste disposal charges decrease considerably due to lower solvent use. The reduction in instrument time dramatically improves the cost effectiveness of UPLC over HPLC due to a concurrent reduction in analyst time requirement. The results of this study show that the analytical costs associated with the analysis of multi-active drugs using HPLC procedures can be reduced substantially by the CONFIDENTIAL INTELLECTUAL PROPERTY OF ASPEN PHARMACARE implementation of UPLC technology. The hypothesis that the enhanced chromatographic power of UPLC can be leveraged to provide faster analysis times hence increased product throughput rates, and lower operating costs for the analysis of multi-active drugs was accepted. These advantages were achieved whilst meeting all regulatory requirements for analytical methods as required by regulatory bodies.
- Full Text:
- Date Issued: 2011
Propagating some commonly-used South African medicinal plants with compost and vermitea
- Authors: Faulconbridge, Steven Craig
- Date: 2013
- Subjects: Medicinal plants -- Propagation -- South Africa , Compost -- South Africa
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10736 , http://hdl.handle.net/10948/d1020316
- Description: The use of many of South Africa’s medicinal plants has shown marked increase with over 27 million users in South Africa alone. Most plants are still being unsustainably wild-harvested, a major concern for biodiversity conservation. Commercial interest in certain more commonly-used species has increased, with potential to cultivate medicinal plants on a more sustainable basis. Focus has shifted from conventional use of synthetic fertilisers, pesticides and fungicides to more organic methods of plant propagation. Aqueous extract derived from earthworm composted food waste (vermitea) was used to study the germination and rooting success of selected species. Also survival and growth performance of selected plants grown in a medium amended with commercial NPK fertiliser was compared to those grown in the same medium amended with compost and to those grown in the same medium amended with compost with weekly applications of vermitea. No change in germination success was noted. Vermitea showed promising results on the rooting of cuttings. The application of NPK improved growth performance (biomass) significantly for all species tested. However, they had lower root:shoot ratios as well as lower survival rates compared to plants under the compost and compost/vermitea treatments. The improved survival of these plants highlights the potential of these organic treatments on the propagation of selected medicinal plants.
- Full Text:
- Date Issued: 2013
- Authors: Faulconbridge, Steven Craig
- Date: 2013
- Subjects: Medicinal plants -- Propagation -- South Africa , Compost -- South Africa
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10736 , http://hdl.handle.net/10948/d1020316
- Description: The use of many of South Africa’s medicinal plants has shown marked increase with over 27 million users in South Africa alone. Most plants are still being unsustainably wild-harvested, a major concern for biodiversity conservation. Commercial interest in certain more commonly-used species has increased, with potential to cultivate medicinal plants on a more sustainable basis. Focus has shifted from conventional use of synthetic fertilisers, pesticides and fungicides to more organic methods of plant propagation. Aqueous extract derived from earthworm composted food waste (vermitea) was used to study the germination and rooting success of selected species. Also survival and growth performance of selected plants grown in a medium amended with commercial NPK fertiliser was compared to those grown in the same medium amended with compost and to those grown in the same medium amended with compost with weekly applications of vermitea. No change in germination success was noted. Vermitea showed promising results on the rooting of cuttings. The application of NPK improved growth performance (biomass) significantly for all species tested. However, they had lower root:shoot ratios as well as lower survival rates compared to plants under the compost and compost/vermitea treatments. The improved survival of these plants highlights the potential of these organic treatments on the propagation of selected medicinal plants.
- Full Text:
- Date Issued: 2013
Reactions towards the synthesis of the uncommon P57 cymarose moiety
- Authors: Mahanjana, Lungelwa
- Date: 2013
- Subjects: Chemistry, Organic , Organic compounds -- Synthesis
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/6711 , vital:21136
- Description: The work described in this study aims to investigate methods that will improve a lengthy synthetic pathway in the synthesis of the P57 cymarose moiety, and to examine the conformational structure of certain glycosides in order to shed light on the problematic stereochemical issues surrounding the formation of the cymarose glycosyl donor. The cymarose moiety forms part of the trisaccharide derivative present in P57, an appetite suppressant molecule. Modification of reaction steps in the conversion of the stereochemistry at C-3 of a previously reported synthesis of the P57 cymarose moiety was carried out. The first step was the selective oxidation of D-glucal using Pd/C in the presence of acetonitrile. These reaction conditions are more appropriate for the oxidation step to avoid decomposition of the formed molecules. Successive protection of the free OH groups was followed by NaBH4 reduction under stereo-controlled conditions, influenced by CeCl3•7H2O. However, the reduced product could not be isolated from the starting material and this led to ambiguous results when attempting to confirm whether the conversion of the stereochemistry at C-3 had occurred or not. The effect of reaction conditions, such as change in reaction temperature, during the preparation of the cymarose glycosyl donor was studied in order to find suitable reaction conditions to produce α,β-allo derivatives with high stereoselectivity. Compared to the reported synthetic method, this set-up gave improved yields with, unfortunately, similar or slightly lower selectivity to the formation of α-altro:α,β-allo derivative. Examination of the conformational structure of the allal derivative, in order to understand the mechanism at work during the placement of the directing group at C-2, was carried out using molecular modelling. The mechanistic implications of this very short study are discussed and it provides some insights into the likely pathway of the iodination reaction and its selectivity in particular, to the D-allose system.
- Full Text:
- Date Issued: 2013
- Authors: Mahanjana, Lungelwa
- Date: 2013
- Subjects: Chemistry, Organic , Organic compounds -- Synthesis
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/6711 , vital:21136
- Description: The work described in this study aims to investigate methods that will improve a lengthy synthetic pathway in the synthesis of the P57 cymarose moiety, and to examine the conformational structure of certain glycosides in order to shed light on the problematic stereochemical issues surrounding the formation of the cymarose glycosyl donor. The cymarose moiety forms part of the trisaccharide derivative present in P57, an appetite suppressant molecule. Modification of reaction steps in the conversion of the stereochemistry at C-3 of a previously reported synthesis of the P57 cymarose moiety was carried out. The first step was the selective oxidation of D-glucal using Pd/C in the presence of acetonitrile. These reaction conditions are more appropriate for the oxidation step to avoid decomposition of the formed molecules. Successive protection of the free OH groups was followed by NaBH4 reduction under stereo-controlled conditions, influenced by CeCl3•7H2O. However, the reduced product could not be isolated from the starting material and this led to ambiguous results when attempting to confirm whether the conversion of the stereochemistry at C-3 had occurred or not. The effect of reaction conditions, such as change in reaction temperature, during the preparation of the cymarose glycosyl donor was studied in order to find suitable reaction conditions to produce α,β-allo derivatives with high stereoselectivity. Compared to the reported synthetic method, this set-up gave improved yields with, unfortunately, similar or slightly lower selectivity to the formation of α-altro:α,β-allo derivative. Examination of the conformational structure of the allal derivative, in order to understand the mechanism at work during the placement of the directing group at C-2, was carried out using molecular modelling. The mechanistic implications of this very short study are discussed and it provides some insights into the likely pathway of the iodination reaction and its selectivity in particular, to the D-allose system.
- Full Text:
- Date Issued: 2013
Hydrothermal co-liquefaction of microalgae biomass and coal
- Authors: Charlie, David
- Date: 2015
- Subjects: Microalgae -- Biotechnology Biomass chemicals , Biomass energy
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/50087 , vital:42035
- Description: In this research, the objective was to investigate under the chosen liquefaction conditions whether co-liquefaction of coal and microalgae biomass as agglomerates does possess a distinct advantage over the individual liquefaction of microalgae and coal. This was initially done by preparing dry micro algal biomass, followed by the preparation of coal fines and finally coal-algae as agglomerates. The agglomerates were prepared by continuously adsorbing wet concentrated microalgae slurry/solution onto the dry coal fines in order to prepare different ratios of coal-algae agglomerate(s). Ultimate analysis of the starting material (coal fines and the microalgae) as well the agglomerates then followed. According to research, wet microalgae biomass has the potential of acting as a hydrogen donor. By preparing the agglomerates, the rationale was to promote hydrogen supply from the micro algal biomass that has high hydrogen content to the coal with lower hydrogen content. The resulting product was then expected to have fairly higher hydrogen content. However, this was not observed or evident from the elemental analysis results. The results (elemental composition) showed no difference between the agglomerates and the coal. Based on the observed ultimate analysis results, liquefaction experiments were conducted to determine whether hydrogen transfer and the expected synergistic effect between micro algal biomass and coal would occur. The crude oil product was recovered and simulated distillation technique was used for the characterization of the crude oil product. The results we in agreement that higher yields can be achieved during co-liquefaction as compared to the individual liquefaction. A possible synergistic effect that was investigated in this research existed. Liquefaction results provided evidence of higher yields recovery from the agglomerates compared to those of coal fines and microalgae biomass. Although there was higher recovery on the agglomerates, there appears to be a downward trend (decrease) in product recovery with higher loadings of micro algal biomass on to the coal. This means that higher loading of micro algal biomass tend to suppress liquefaction of coal, thus resulting in lower product recovery. While lower loadings tend to effectively facilitate the liquefaction of coal, thus proving that the proposed synergistic effect between the two does exist. Overall product recovery (yields) of the agglomerates is higher compared to the individual recovery of coal fines and microalgae biomass. This was followed by mass balancing to determine the overall conversion. Higher conversions were achieved on the agglomerates compared to coal. This could mean that microalgae have the potential to facilitate the liquefaction of coal and improve its conversion. The observed trend results in improved conversion as well as higher oil yields (simulated distillation results). Overall, the mass balancing provided insightful information regarding the coal-microalgae interaction based on the conversion, and this further corresponds or supports the simulated distillation results. This research paper provides evidence of the synergistic effect that exists between micro algal biomass and coal.
- Full Text:
- Date Issued: 2015
- Authors: Charlie, David
- Date: 2015
- Subjects: Microalgae -- Biotechnology Biomass chemicals , Biomass energy
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/50087 , vital:42035
- Description: In this research, the objective was to investigate under the chosen liquefaction conditions whether co-liquefaction of coal and microalgae biomass as agglomerates does possess a distinct advantage over the individual liquefaction of microalgae and coal. This was initially done by preparing dry micro algal biomass, followed by the preparation of coal fines and finally coal-algae as agglomerates. The agglomerates were prepared by continuously adsorbing wet concentrated microalgae slurry/solution onto the dry coal fines in order to prepare different ratios of coal-algae agglomerate(s). Ultimate analysis of the starting material (coal fines and the microalgae) as well the agglomerates then followed. According to research, wet microalgae biomass has the potential of acting as a hydrogen donor. By preparing the agglomerates, the rationale was to promote hydrogen supply from the micro algal biomass that has high hydrogen content to the coal with lower hydrogen content. The resulting product was then expected to have fairly higher hydrogen content. However, this was not observed or evident from the elemental analysis results. The results (elemental composition) showed no difference between the agglomerates and the coal. Based on the observed ultimate analysis results, liquefaction experiments were conducted to determine whether hydrogen transfer and the expected synergistic effect between micro algal biomass and coal would occur. The crude oil product was recovered and simulated distillation technique was used for the characterization of the crude oil product. The results we in agreement that higher yields can be achieved during co-liquefaction as compared to the individual liquefaction. A possible synergistic effect that was investigated in this research existed. Liquefaction results provided evidence of higher yields recovery from the agglomerates compared to those of coal fines and microalgae biomass. Although there was higher recovery on the agglomerates, there appears to be a downward trend (decrease) in product recovery with higher loadings of micro algal biomass on to the coal. This means that higher loading of micro algal biomass tend to suppress liquefaction of coal, thus resulting in lower product recovery. While lower loadings tend to effectively facilitate the liquefaction of coal, thus proving that the proposed synergistic effect between the two does exist. Overall product recovery (yields) of the agglomerates is higher compared to the individual recovery of coal fines and microalgae biomass. This was followed by mass balancing to determine the overall conversion. Higher conversions were achieved on the agglomerates compared to coal. This could mean that microalgae have the potential to facilitate the liquefaction of coal and improve its conversion. The observed trend results in improved conversion as well as higher oil yields (simulated distillation results). Overall, the mass balancing provided insightful information regarding the coal-microalgae interaction based on the conversion, and this further corresponds or supports the simulated distillation results. This research paper provides evidence of the synergistic effect that exists between micro algal biomass and coal.
- Full Text:
- Date Issued: 2015
Replacing maize with barley in concetrates fed to jersey cows grazing on kikuyu/ryegrass pasture
- Authors: Lehmann, Maryna
- Date: 2004
- Subjects: Jersey cattle -- Feeding and feeds , Dairy cattle -- Feeding and feeds
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10732 , http://hdl.handle.net/10948/181 , Jersey cattle -- Feeding and feeds , Dairy cattle -- Feeding and feeds
- Description: The aim of the first study was to determine if barley could replace maize as an energy source in concentrates fed to dairy cows grazing on kikuyu/ryegrass pasture without affecting the milk production, milk composition, or cause metabolic disorders. Sixty Jersey cows, in early to mid lactation were randomly allocated to one of five treatments (n = 12) based on feeding concentrates with different ratios of maize to barley, ranging from 100:0, 75:25, 50:50, 25:75 and 0:100, respectively. Concentrates contained 12 MJ ME kg -1 and 130g CP kg-1 DM and cows were fed 3 kg (as-is) concentrate after each milking for a period of 42 days (14-day adaptation and 28-day measurement). Cows strip-grazed the irrigated kikuyu/ryegrass pastures (15.7 ± 1.8 percent DM; 20.2 ± 4.3 percent CP; 44.7 ± 3.5 percent NDF). Milk weights were recorded daily and milk samples collected weekly and analyzed for milk fat and protein content. Body condition score and live weight were recorded at the start and end of the experimental period. Data of all the studies were subjected to a one-way ANOVA. Daily milk yield, FCM, MUN, milk fat yield, milk fat percent, protein yield, protein percent, live weight change, or body condition score change were not affected by treatment and values were 15.8 kg, 17.2 kg, 14.9 mg dl-1, 0.72 kg, 4.56 percent, 0.59 kg, 3.77 percent, 6.67 kg, and 0.15 BCS; 15.6 kg, 17.4 kg, 15.2 mg dl-1, 0.73 kg, 4.3 percent, 0.57 kg, 3.71 percent, 1.33 kg and 0.04 BCS; 17.2 kg, 17.9 kg, 15.2 mg dl-1, 0.74 kg, 4.36 percent, 0.63 kg, 3.71 percent, 0.33 kg and 0.08 BCS; 15.6 kg, 16.4 kg, 15.5 mg dl-1, 0.67 kg, 4.33 percent, 0.60 kg, 3.83 percent, -1.46 kg and 0.11 BCS; and 15.0 kg, 16.0 kg, 15.5 mg dl-1, 0.67 kg, 4.57 percent, 0.57 kg, 3.85 percent, 8.86 kg, and 0.05 BCS, respectively for the cows fed 100:0, 75:25, 50:50, 25:75 and 0:100 maize to barley ratio concentrate. According to these results, barley can replace maize without significantly affecting the milk production or milk composition. None of the cows presented any visible symptoms of acidosis. As it was clear from the results in the first study that maize could replace barley the aim of study 2A was therefore focused on determining the effect of feeding different levels of such a barley-based (2.4, 4.8 or 7.2 kg cow-1day-1) concentrate, on milk production, milk composition and live weight change of Jersey cows on kikuyu/ryegrass pasture (23.1 ± 2.95 percent DM, 11.1 ± 0.11 percent CP, 60.8 ± 0.58 percent NDF). Forty-five Jersey cows (early- to mid lactation), were randomly allocated to one of three treatments (n = 15) involving different levels of concentrate (12 MJ ME and 130g CP kg-1 DM) feeding for a period of 42 days (14-day adaptation and 28-day measurement). Milk weights were also recorded daily, and milk samples collected weekly, and analyzed for milk fat and protein. Body condition score and live weight were recorded at the start and end of the experimental period. The results of this study indicated that increasing the concentrate level from 2.4 to 4.8 and 7.2kg cow-1day-1 did not increase the milk yield (14.0 kg, 15.2 kg, 14.4 kg; P = 0.19). The FCM production increased from 15.8 to 17.5kg (P = 0.04) as the concentrate level increased from 2.4 to 4.8kg cow-1day-1. Increasing the concentrate from 4.8 to 7.2kg cow-1day-1 did not result in a significant increase in FCM. The milk protein percent increased significantly from 3.4 - 3.6 percent when the concentrate feeding level was increased from 2.4 to 7.2kg cow-1day-1. The MUN levels were 17.09 mg dl-1, 16.03 5 mg dl-1, and 16.36 mg dl-1 for the 2.4, 4.8 and 7.2kg cow-1day-1 concentrate levels, respectively. This is well within the recommended MUN levels (12 – 18 mg dl-1) indicating that sufficient protein was fed to cows. Increasing the concentrate level from 4.8 to 7.2 kg cow-1day-1 did not increase production, probably due to a higher pasture substitution rate. Supplementing large quantities of rapidly fermentable grains, such as barley, can suppress rumen pH and may have a negative effect on the rate and extent of fibre digestion in the rumen. Therefore the aim of study 2B was not only to determine the effect of feeding different levels of a barley-based concentrate, on milk production, milk composition and live weight change, but was also to determine the effect of a low (4.8 kg cow-1day-1) versus a high (7.2 kg cow-1day-1) level of barley-based concentrate supplementation on ruminal DM and NDF degradability of Westerworld ryegrass sampled from the pastures that these cows were grazing on. Sixty Jersey cows (early- to mid lactation), were randomly allocated to one of three treatments (n = 20) involving different levels of concentrate feeding. Concentrate (12 MJ ME, 130g CP kg-1 DM) was fed at 2.4, 4.8 or 7.2 kg cow-1day-1 for a period of 74 days (14-day adaptation and 60-day measurement). These cows stripgrazed irrigated kikuyu/ryegrass pastures (14.7 ± 4.37 percent DM, 25.1 ± 1.53 percent CP, and 44.4 ± 2.58 percent NDF) at a daily pasture allocation of 10 kg DM cow-1. Milk weights were recorded daily and milk samples collected weekly and analyzed for milk fat and protein. Body condition score and live weight were recorded at the start and end of the experimental period. Twelve Jersey cows, fitted with ruminal cannulae, were randomly allocated to two of the three treatments in the production study and received either 2.4 or 7.2 kg cow-1 day-1, of the same barley-based concentrate, in a two-period crossover design. These cows strip-grazed the same irrigated kikuyu/ryegrass pastures as the sixty cows in the production study. Each period consisted of 21 days for adaptation and seven days for data collection. Rumen liquor samples were collected every 4 hours within a 24-hour cycle and repeated once. Rumen pH was measured immediately, recorded, and the supernatant fluid preserved and frozen, pending VFA analysis. The in situ nylon bag technique was used to determine DM and NDF degradation and dried samples of Westerworld ryegrass pasture were incubated for 0, 4, 8, 12, 20, 30, 48, 72 and 96 hours. The data were fitted in the non-linear model p = a + b (1-exp-ct) (Ørskov & McDonald, 1979). Daily milk production, fat corrected milk, milk fat yield and milk fat percent were not affected by treatment and values were 17.3 kg, 18.4 kg, 0.76 kg and 4.42 percent; 19.0 kg, 20.0 kg, 0.82 kg and 4.35 percent; and 18.1 kg, 19.1 kg, 0.79 kg and 4.37 percent for the 2.4, 4.8 and 7.2 kg cow-1 day-1 concentrate treatments, respectively. Milk protein percentage of cows on the 7.2 kg concentrate cow-1 day-1 was significantly higher than that of cows on 4.2 kg concentrate cow-1 day-1 feeding level. Live weight increased significantly as the level of concentrate feeding increased and values were 17.9 kg; and 28.9 kg on the 2.4 and 7.2kg concentrate treatment, respectively. There was a significant increase in the live weight of cows that were fed 7.2 kg cow-1 day-1 (as-is) in comparison to those cows that were fed 2.4 kg concentrate cow-1 day-1 (as-is). This may have resulted from more nutrients being partitioned to live weight gain rather than milk production. No further response in milk production was observed when concentrate daily feeding was increased from 4.8 to 7.2 kg cow-1 day-1. It is postulated that the higher concentrate allowance resulted in a higher substitution rate and lower DMI intake from pasture. 6 There was no significant decline in the rumen pH (6.2 ± 0.4 and 6.2 ± 0.5) when the concentrate level was increased from 2.4 to 7.2 kg cow-1 day-1 (as-is). The total VFA (118.1 ± 45.9 and 139.4 ± 45.6 mmol L-1) and isovalerate (0.009 ± 0.07 and 0.248 ± 0.52 mmol L-1) increased significantly when the concentrate was increased from 2.4 to 7.2 kg cow-1day-1. No other rumen parameters were affected by treatment. Ruminal DM and NDF degradability of the Kikuyu/ryegrass pature were not affected by the level of concentrate supplementation. An increase in the concentrate level from 2.4 to 7.2 kg cow-1day-1 did not reduce degradability of either DM (94.67 ± 5.97, 94.49 ± 5.09; P = 0.919) or NDF (92.15 ± 8.69, 94.4 ± 11.73; P = 0.451), respectively. Results of rumen parameters and PD values were within the range reported by Bargo et al., (2003), viz. pH 5.76 – 6.29, NH3-N concentration 8.7 – 32.2 mg dl-1, total VFA concentration 90.3 - 151.4 mmol L-1 and PD values 89.5 – 93.5 % reported by Bargo et al. (2003). According to these authors, there is no simple relationship between any amount of the concentrate supplemented, and the ruminal pH and concentrate feeding only affects the in situ ruminal digestion of pasture when it is fed, at quantities higher than 8 kg DM cow-1day-1 (Bargo et al., 2003).
- Full Text:
- Date Issued: 2004
- Authors: Lehmann, Maryna
- Date: 2004
- Subjects: Jersey cattle -- Feeding and feeds , Dairy cattle -- Feeding and feeds
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10732 , http://hdl.handle.net/10948/181 , Jersey cattle -- Feeding and feeds , Dairy cattle -- Feeding and feeds
- Description: The aim of the first study was to determine if barley could replace maize as an energy source in concentrates fed to dairy cows grazing on kikuyu/ryegrass pasture without affecting the milk production, milk composition, or cause metabolic disorders. Sixty Jersey cows, in early to mid lactation were randomly allocated to one of five treatments (n = 12) based on feeding concentrates with different ratios of maize to barley, ranging from 100:0, 75:25, 50:50, 25:75 and 0:100, respectively. Concentrates contained 12 MJ ME kg -1 and 130g CP kg-1 DM and cows were fed 3 kg (as-is) concentrate after each milking for a period of 42 days (14-day adaptation and 28-day measurement). Cows strip-grazed the irrigated kikuyu/ryegrass pastures (15.7 ± 1.8 percent DM; 20.2 ± 4.3 percent CP; 44.7 ± 3.5 percent NDF). Milk weights were recorded daily and milk samples collected weekly and analyzed for milk fat and protein content. Body condition score and live weight were recorded at the start and end of the experimental period. Data of all the studies were subjected to a one-way ANOVA. Daily milk yield, FCM, MUN, milk fat yield, milk fat percent, protein yield, protein percent, live weight change, or body condition score change were not affected by treatment and values were 15.8 kg, 17.2 kg, 14.9 mg dl-1, 0.72 kg, 4.56 percent, 0.59 kg, 3.77 percent, 6.67 kg, and 0.15 BCS; 15.6 kg, 17.4 kg, 15.2 mg dl-1, 0.73 kg, 4.3 percent, 0.57 kg, 3.71 percent, 1.33 kg and 0.04 BCS; 17.2 kg, 17.9 kg, 15.2 mg dl-1, 0.74 kg, 4.36 percent, 0.63 kg, 3.71 percent, 0.33 kg and 0.08 BCS; 15.6 kg, 16.4 kg, 15.5 mg dl-1, 0.67 kg, 4.33 percent, 0.60 kg, 3.83 percent, -1.46 kg and 0.11 BCS; and 15.0 kg, 16.0 kg, 15.5 mg dl-1, 0.67 kg, 4.57 percent, 0.57 kg, 3.85 percent, 8.86 kg, and 0.05 BCS, respectively for the cows fed 100:0, 75:25, 50:50, 25:75 and 0:100 maize to barley ratio concentrate. According to these results, barley can replace maize without significantly affecting the milk production or milk composition. None of the cows presented any visible symptoms of acidosis. As it was clear from the results in the first study that maize could replace barley the aim of study 2A was therefore focused on determining the effect of feeding different levels of such a barley-based (2.4, 4.8 or 7.2 kg cow-1day-1) concentrate, on milk production, milk composition and live weight change of Jersey cows on kikuyu/ryegrass pasture (23.1 ± 2.95 percent DM, 11.1 ± 0.11 percent CP, 60.8 ± 0.58 percent NDF). Forty-five Jersey cows (early- to mid lactation), were randomly allocated to one of three treatments (n = 15) involving different levels of concentrate (12 MJ ME and 130g CP kg-1 DM) feeding for a period of 42 days (14-day adaptation and 28-day measurement). Milk weights were also recorded daily, and milk samples collected weekly, and analyzed for milk fat and protein. Body condition score and live weight were recorded at the start and end of the experimental period. The results of this study indicated that increasing the concentrate level from 2.4 to 4.8 and 7.2kg cow-1day-1 did not increase the milk yield (14.0 kg, 15.2 kg, 14.4 kg; P = 0.19). The FCM production increased from 15.8 to 17.5kg (P = 0.04) as the concentrate level increased from 2.4 to 4.8kg cow-1day-1. Increasing the concentrate from 4.8 to 7.2kg cow-1day-1 did not result in a significant increase in FCM. The milk protein percent increased significantly from 3.4 - 3.6 percent when the concentrate feeding level was increased from 2.4 to 7.2kg cow-1day-1. The MUN levels were 17.09 mg dl-1, 16.03 5 mg dl-1, and 16.36 mg dl-1 for the 2.4, 4.8 and 7.2kg cow-1day-1 concentrate levels, respectively. This is well within the recommended MUN levels (12 – 18 mg dl-1) indicating that sufficient protein was fed to cows. Increasing the concentrate level from 4.8 to 7.2 kg cow-1day-1 did not increase production, probably due to a higher pasture substitution rate. Supplementing large quantities of rapidly fermentable grains, such as barley, can suppress rumen pH and may have a negative effect on the rate and extent of fibre digestion in the rumen. Therefore the aim of study 2B was not only to determine the effect of feeding different levels of a barley-based concentrate, on milk production, milk composition and live weight change, but was also to determine the effect of a low (4.8 kg cow-1day-1) versus a high (7.2 kg cow-1day-1) level of barley-based concentrate supplementation on ruminal DM and NDF degradability of Westerworld ryegrass sampled from the pastures that these cows were grazing on. Sixty Jersey cows (early- to mid lactation), were randomly allocated to one of three treatments (n = 20) involving different levels of concentrate feeding. Concentrate (12 MJ ME, 130g CP kg-1 DM) was fed at 2.4, 4.8 or 7.2 kg cow-1day-1 for a period of 74 days (14-day adaptation and 60-day measurement). These cows stripgrazed irrigated kikuyu/ryegrass pastures (14.7 ± 4.37 percent DM, 25.1 ± 1.53 percent CP, and 44.4 ± 2.58 percent NDF) at a daily pasture allocation of 10 kg DM cow-1. Milk weights were recorded daily and milk samples collected weekly and analyzed for milk fat and protein. Body condition score and live weight were recorded at the start and end of the experimental period. Twelve Jersey cows, fitted with ruminal cannulae, were randomly allocated to two of the three treatments in the production study and received either 2.4 or 7.2 kg cow-1 day-1, of the same barley-based concentrate, in a two-period crossover design. These cows strip-grazed the same irrigated kikuyu/ryegrass pastures as the sixty cows in the production study. Each period consisted of 21 days for adaptation and seven days for data collection. Rumen liquor samples were collected every 4 hours within a 24-hour cycle and repeated once. Rumen pH was measured immediately, recorded, and the supernatant fluid preserved and frozen, pending VFA analysis. The in situ nylon bag technique was used to determine DM and NDF degradation and dried samples of Westerworld ryegrass pasture were incubated for 0, 4, 8, 12, 20, 30, 48, 72 and 96 hours. The data were fitted in the non-linear model p = a + b (1-exp-ct) (Ørskov & McDonald, 1979). Daily milk production, fat corrected milk, milk fat yield and milk fat percent were not affected by treatment and values were 17.3 kg, 18.4 kg, 0.76 kg and 4.42 percent; 19.0 kg, 20.0 kg, 0.82 kg and 4.35 percent; and 18.1 kg, 19.1 kg, 0.79 kg and 4.37 percent for the 2.4, 4.8 and 7.2 kg cow-1 day-1 concentrate treatments, respectively. Milk protein percentage of cows on the 7.2 kg concentrate cow-1 day-1 was significantly higher than that of cows on 4.2 kg concentrate cow-1 day-1 feeding level. Live weight increased significantly as the level of concentrate feeding increased and values were 17.9 kg; and 28.9 kg on the 2.4 and 7.2kg concentrate treatment, respectively. There was a significant increase in the live weight of cows that were fed 7.2 kg cow-1 day-1 (as-is) in comparison to those cows that were fed 2.4 kg concentrate cow-1 day-1 (as-is). This may have resulted from more nutrients being partitioned to live weight gain rather than milk production. No further response in milk production was observed when concentrate daily feeding was increased from 4.8 to 7.2 kg cow-1 day-1. It is postulated that the higher concentrate allowance resulted in a higher substitution rate and lower DMI intake from pasture. 6 There was no significant decline in the rumen pH (6.2 ± 0.4 and 6.2 ± 0.5) when the concentrate level was increased from 2.4 to 7.2 kg cow-1 day-1 (as-is). The total VFA (118.1 ± 45.9 and 139.4 ± 45.6 mmol L-1) and isovalerate (0.009 ± 0.07 and 0.248 ± 0.52 mmol L-1) increased significantly when the concentrate was increased from 2.4 to 7.2 kg cow-1day-1. No other rumen parameters were affected by treatment. Ruminal DM and NDF degradability of the Kikuyu/ryegrass pature were not affected by the level of concentrate supplementation. An increase in the concentrate level from 2.4 to 7.2 kg cow-1day-1 did not reduce degradability of either DM (94.67 ± 5.97, 94.49 ± 5.09; P = 0.919) or NDF (92.15 ± 8.69, 94.4 ± 11.73; P = 0.451), respectively. Results of rumen parameters and PD values were within the range reported by Bargo et al., (2003), viz. pH 5.76 – 6.29, NH3-N concentration 8.7 – 32.2 mg dl-1, total VFA concentration 90.3 - 151.4 mmol L-1 and PD values 89.5 – 93.5 % reported by Bargo et al. (2003). According to these authors, there is no simple relationship between any amount of the concentrate supplemented, and the ruminal pH and concentrate feeding only affects the in situ ruminal digestion of pasture when it is fed, at quantities higher than 8 kg DM cow-1day-1 (Bargo et al., 2003).
- Full Text:
- Date Issued: 2004