Towards measuring corporate sustainability in the Nelson Mandela Bay automotive manufacturing sector
- Authors: Adams, Abulele
- Date: 2015
- Subjects: Sustainability -- South Africa -- Port Elizabeth Sustainable development -- South Africa -- Port Elizabeth
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/18465 , vital:28648
- Description: This study explored the methods available for measuring corporate sustainability and created an instrument to measure corporate sustainability in the Nelson Mandela Bay (NMB) automotive manufacturing sector. The instrument was created based on three components of sustainability which are environment, society and economy. The study went a step further and added a fourth dimension, current trends to design a measuring instrument. The instrument was then applied on participating companies and further refined to improve it. A total of 16 multi-dimensional indicators to measure corporate sustainability were created and applied to 12 companies in the automotive manufacturing sector. The indicators were used to create a composite corporate sustainability index which can be used to compare the corporate sustainability performance of companies. These indicators were created based on theoretical research and fist hand experience observing the automotive manufacturing sector in the NMB. The indicators were applied to companies as a pilot to test whether they are feasible. Following this, the indicators were refined, improved and applied to more companies to measure corporate sustainability performance. The results of the study were the measuring instrument created, the creation of a composite index as well as the application of the instrument on 12 companies to determine whether the instrument was refined enough to detect differences in the corporate sustainability performance of companies. The results are discussed and further recommendations are made for improvements in the creation and application of the instrument to measure corporate sustainability in the NMB automotive manufacturing sector.
- Full Text:
- Date Issued: 2015
Towards measuring corporate sustainability in the Nelson Mandela Bay automotive manufacturing sector
- Authors: Adams, Abulele
- Date: 2015
- Subjects: Sustainability -- South Africa -- Port Elizabeth Sustainable development -- South Africa -- Port Elizabeth
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/18465 , vital:28648
- Description: This study explored the methods available for measuring corporate sustainability and created an instrument to measure corporate sustainability in the Nelson Mandela Bay (NMB) automotive manufacturing sector. The instrument was created based on three components of sustainability which are environment, society and economy. The study went a step further and added a fourth dimension, current trends to design a measuring instrument. The instrument was then applied on participating companies and further refined to improve it. A total of 16 multi-dimensional indicators to measure corporate sustainability were created and applied to 12 companies in the automotive manufacturing sector. The indicators were used to create a composite corporate sustainability index which can be used to compare the corporate sustainability performance of companies. These indicators were created based on theoretical research and fist hand experience observing the automotive manufacturing sector in the NMB. The indicators were applied to companies as a pilot to test whether they are feasible. Following this, the indicators were refined, improved and applied to more companies to measure corporate sustainability performance. The results of the study were the measuring instrument created, the creation of a composite index as well as the application of the instrument on 12 companies to determine whether the instrument was refined enough to detect differences in the corporate sustainability performance of companies. The results are discussed and further recommendations are made for improvements in the creation and application of the instrument to measure corporate sustainability in the NMB automotive manufacturing sector.
- Full Text:
- Date Issued: 2015
Investigating long-term host-parasite dynamics in odontocetes in Southern Africa
- Authors: Adams, Inge Alison
- Date: 2018
- Subjects: Biological invasions -- Environmental aspects , Cetacea -- Indian Ocean , Ecological disturbances
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/23437 , vital:30543
- Description: Cetaceans are a very diverse family and globally, various aspects about their biology have been studied, including infection by parasites. Twenty-five dolphin species can be found in the South African subregion and very little information is available detailing which parasites are infecting them. Parasite samples have been collected opportunistically since the 1970’s from dolphins incidentally caught in shark nets off the KwaZulu-Natal coastline as well as from dolphins stranded along the Eastern Cape coastline. These samples have been stored in the Graham Ross Marine Mammal Collection at the Port Elizabeth Museum and samples belonging to eight odontocete species have been used in the present analysis. These eight species are: the Indian Ocean Humpback Dolphin (Sousa plumbea), the Indo-Pacific Bottlenose Dolphin (Tursiops aduncus), the Long-beaked Common Dolphin (Delphinus capensis), the Risso’s Dolphin (Grampus griseus), the Pantropical Spotted Dolphin (Stenella attenuata), the Striped Dolphin (Stenella coeruleoalba), the Pygmy Sperm Whale (Kogia breviceps) and the Dwarf Sperm Whale (Kogia breviceps). This study aims to investigate which parasites are infecting odontocetes in Southern Africa. Secondly, this study aims to investigate whether any trends in infection exist between sexes, age groups, cause of death and over time. Eighteen parasite species were found to infect odontocetes in Southern Africa. Two could only be identified to family level, seven to genus level and eight to species level. Only one parasite, a trematode, could not be identified and several parasite species were new host records for the subregion. Results showed that the prevalence of parasitic infection has increased over the last four decades, prompting questions regarding the health of our oceans. This study is the first to comprehensively investigate which parasite species are found in these eight odontocete species in Southern Africa. This baseline data will contribute greatly to other types of research involving parasites and provides us with information regarding the health of our ocean.
- Full Text:
- Date Issued: 2018
- Authors: Adams, Inge Alison
- Date: 2018
- Subjects: Biological invasions -- Environmental aspects , Cetacea -- Indian Ocean , Ecological disturbances
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/23437 , vital:30543
- Description: Cetaceans are a very diverse family and globally, various aspects about their biology have been studied, including infection by parasites. Twenty-five dolphin species can be found in the South African subregion and very little information is available detailing which parasites are infecting them. Parasite samples have been collected opportunistically since the 1970’s from dolphins incidentally caught in shark nets off the KwaZulu-Natal coastline as well as from dolphins stranded along the Eastern Cape coastline. These samples have been stored in the Graham Ross Marine Mammal Collection at the Port Elizabeth Museum and samples belonging to eight odontocete species have been used in the present analysis. These eight species are: the Indian Ocean Humpback Dolphin (Sousa plumbea), the Indo-Pacific Bottlenose Dolphin (Tursiops aduncus), the Long-beaked Common Dolphin (Delphinus capensis), the Risso’s Dolphin (Grampus griseus), the Pantropical Spotted Dolphin (Stenella attenuata), the Striped Dolphin (Stenella coeruleoalba), the Pygmy Sperm Whale (Kogia breviceps) and the Dwarf Sperm Whale (Kogia breviceps). This study aims to investigate which parasites are infecting odontocetes in Southern Africa. Secondly, this study aims to investigate whether any trends in infection exist between sexes, age groups, cause of death and over time. Eighteen parasite species were found to infect odontocetes in Southern Africa. Two could only be identified to family level, seven to genus level and eight to species level. Only one parasite, a trematode, could not be identified and several parasite species were new host records for the subregion. Results showed that the prevalence of parasitic infection has increased over the last four decades, prompting questions regarding the health of our oceans. This study is the first to comprehensively investigate which parasite species are found in these eight odontocete species in Southern Africa. This baseline data will contribute greatly to other types of research involving parasites and provides us with information regarding the health of our ocean.
- Full Text:
- Date Issued: 2018
Potential use of carbon nanotubes as a nanofiller for natural rubber latex condoms
- Authors: Agbakoba, Victor Chike
- Date: 2018
- Subjects: Nanotubes , Rubber chemistry Nanocomposites (Materials) Nanostructured materials
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/23393 , vital:30538
- Description: The recent advancement in the field of nano-technology has raised much interest in the area of natural rubber latex (NRL) processing. This interest stems from the exceptional properties of nano-material and the promising results obtained by several researchers. Studies have shown that very low loadings of inorganic nanomaterials such as carbon nanotube (CNT) in NRL matrix leads to enhanced tensile strength, tensile modulus, tear resistance and aberration resistance. Thus providing a great prospect for reinforcement of thin film NRL articles such as condom. In this research, prevulcanised natural rubber latex (PvNRL) composite blends containing single walled carbon nanotubes (SWCNTs) were prepared via direct mixing. A progressive discolouration of PvNRL was observed with increased loadings of CNTs. Thermal analysis revealed faster drying rates for the composite blends containing SWCNT. Results from equilibrium swelling experiments also suggested a slight increase in crosslink density in the presence of SWCNT. There was a significant influence on flow behaviour of PvNRL as a result of varying loadings of SWCNT suspension. This was reflected as a change in pseudoplasticity and apparent viscosity. For Instance, apparent viscosity at a shear rate of 1 s-1 at 25°C for PvNRL with ~0.08% SWCNT was 2.5 Pa.s, compared to 0.49 Pa.s for the blends with 0.02% SWCNT. Condoms were moulded via the straight dipping technique using custom made glass formers. A series of dilutions was performed to correct the viscosity differences. This also ensured good consistency and promoted uniform deposition of PvNRL on the glass former. The average dimensions of the condoms produced in terms of length and width were ~191.17 ± 5.17 mm and 52.67 ± 5.17 mm respectively. Thickness measurement varied slightly according to the method of determination. The water leakage test suggested the absence of holes in the condoms produced. However, results from electrical leakage test contradicted those from water leak test. The results from infrared spectroscopy (FTIR) did not confirm the presence of chemical interactions between the SWCNT and PvNRL matrix. Glass transition temperature (Tg) was also unaffected across the blends. The stiffness (or modulus) was unaffected in all the condoms, as revealed by results from indentation hardness analysis. The SWCNT showed no significant influence on thermal decomposition temperatures of the condoms. Nonetheless, images from optical microscopy revealed increased surface roughness corresponding to higher loadings of SWCNT. Results from stress relaxation studies revealed improved retention of modulus under constant strain for condom samples containing SWCNT.
- Full Text:
- Date Issued: 2018
- Authors: Agbakoba, Victor Chike
- Date: 2018
- Subjects: Nanotubes , Rubber chemistry Nanocomposites (Materials) Nanostructured materials
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/23393 , vital:30538
- Description: The recent advancement in the field of nano-technology has raised much interest in the area of natural rubber latex (NRL) processing. This interest stems from the exceptional properties of nano-material and the promising results obtained by several researchers. Studies have shown that very low loadings of inorganic nanomaterials such as carbon nanotube (CNT) in NRL matrix leads to enhanced tensile strength, tensile modulus, tear resistance and aberration resistance. Thus providing a great prospect for reinforcement of thin film NRL articles such as condom. In this research, prevulcanised natural rubber latex (PvNRL) composite blends containing single walled carbon nanotubes (SWCNTs) were prepared via direct mixing. A progressive discolouration of PvNRL was observed with increased loadings of CNTs. Thermal analysis revealed faster drying rates for the composite blends containing SWCNT. Results from equilibrium swelling experiments also suggested a slight increase in crosslink density in the presence of SWCNT. There was a significant influence on flow behaviour of PvNRL as a result of varying loadings of SWCNT suspension. This was reflected as a change in pseudoplasticity and apparent viscosity. For Instance, apparent viscosity at a shear rate of 1 s-1 at 25°C for PvNRL with ~0.08% SWCNT was 2.5 Pa.s, compared to 0.49 Pa.s for the blends with 0.02% SWCNT. Condoms were moulded via the straight dipping technique using custom made glass formers. A series of dilutions was performed to correct the viscosity differences. This also ensured good consistency and promoted uniform deposition of PvNRL on the glass former. The average dimensions of the condoms produced in terms of length and width were ~191.17 ± 5.17 mm and 52.67 ± 5.17 mm respectively. Thickness measurement varied slightly according to the method of determination. The water leakage test suggested the absence of holes in the condoms produced. However, results from electrical leakage test contradicted those from water leak test. The results from infrared spectroscopy (FTIR) did not confirm the presence of chemical interactions between the SWCNT and PvNRL matrix. Glass transition temperature (Tg) was also unaffected across the blends. The stiffness (or modulus) was unaffected in all the condoms, as revealed by results from indentation hardness analysis. The SWCNT showed no significant influence on thermal decomposition temperatures of the condoms. Nonetheless, images from optical microscopy revealed increased surface roughness corresponding to higher loadings of SWCNT. Results from stress relaxation studies revealed improved retention of modulus under constant strain for condom samples containing SWCNT.
- Full Text:
- Date Issued: 2018
The contribution of the trade in medicinal plants to urban livelihoods: a case study of the informal markets in Nelson Mandela Bay Municipality, Eastern Cape
- Ah Goo, Delia Felecia Stephanie
- Authors: Ah Goo, Delia Felecia Stephanie
- Date: 2012
- Subjects: Medicinal plants -- South Africa -- Port Elizabeth , Informal sector (Economics) -- South Africa -- Eastern Cape , Traditional medicine -- South Africa -- Port Elizabeth -- Markets
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10654 , http://hdl.handle.net/10948/d1011601 , Medicinal plants -- South Africa -- Port Elizabeth , Informal sector (Economics) -- South Africa -- Eastern Cape , Traditional medicine -- South Africa -- Port Elizabeth -- Markets
- Description: The commercialisation of natural resources such as medicinal plants is a strategy that is increasingly being employed by poor people in developing countries such as South Africa, as a means of generating an income. Increasing economic hardship and a lack of employment opportunities in the formal sector of the economy has led to many urban dwellers seeking alternative means of meeting their everyday livelihood needs. Although the contribution of natural resources to subsistence economies is widely recognised, there are few studies that have examined the significance of the trade in medicinal plants to the livelihoods of poor and marginalised people. Thirty informal street traders were interviewed to investigate the role of the medicinal plant trade in sustaining the livelihoods of the traders who operate in the informal sector of the Nelson Mandela Bay Municipality, South Africa. The findings of the research indicate that the sale and collection of medicinal plants is an activity which is exploited by people with limited resources, few skills, little or no education and often without any other source of household income. Middle-aged women from impoverished, single income households dominated the trade. Although income from the trade is modest, it contributed substantially to the total household cash income of the traders. Other benefits of the trade included independence and having a sense of purpose in life, as the traders felt that they were not only helping their families but also the wider community. However, without the income from the trade, many of the traders and their families would be destitute and thus the medicinal plant trade is vital to the wellbeing of these people.
- Full Text:
- Date Issued: 2012
- Authors: Ah Goo, Delia Felecia Stephanie
- Date: 2012
- Subjects: Medicinal plants -- South Africa -- Port Elizabeth , Informal sector (Economics) -- South Africa -- Eastern Cape , Traditional medicine -- South Africa -- Port Elizabeth -- Markets
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10654 , http://hdl.handle.net/10948/d1011601 , Medicinal plants -- South Africa -- Port Elizabeth , Informal sector (Economics) -- South Africa -- Eastern Cape , Traditional medicine -- South Africa -- Port Elizabeth -- Markets
- Description: The commercialisation of natural resources such as medicinal plants is a strategy that is increasingly being employed by poor people in developing countries such as South Africa, as a means of generating an income. Increasing economic hardship and a lack of employment opportunities in the formal sector of the economy has led to many urban dwellers seeking alternative means of meeting their everyday livelihood needs. Although the contribution of natural resources to subsistence economies is widely recognised, there are few studies that have examined the significance of the trade in medicinal plants to the livelihoods of poor and marginalised people. Thirty informal street traders were interviewed to investigate the role of the medicinal plant trade in sustaining the livelihoods of the traders who operate in the informal sector of the Nelson Mandela Bay Municipality, South Africa. The findings of the research indicate that the sale and collection of medicinal plants is an activity which is exploited by people with limited resources, few skills, little or no education and often without any other source of household income. Middle-aged women from impoverished, single income households dominated the trade. Although income from the trade is modest, it contributed substantially to the total household cash income of the traders. Other benefits of the trade included independence and having a sense of purpose in life, as the traders felt that they were not only helping their families but also the wider community. However, without the income from the trade, many of the traders and their families would be destitute and thus the medicinal plant trade is vital to the wellbeing of these people.
- Full Text:
- Date Issued: 2012
Statistical model for risk diversification in renewable energy
- Authors: Ahame, Edmund
- Date: 2013
- Subjects: Renewable energy sources -- Statistics , Diversification in industry
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10564 , http://hdl.handle.net/10948/d1008399 , Renewable energy sources -- Statistics , Diversification in industry
- Description: The growth of the industry and population of South Africa urges to seek new sources of electric power, hence the need to look at alternative power sources. Power output from some renewable energy sources is highly volatile. For instance power output from wind turbines or photovoltaic solar panels fluctuates between zero and the maximum rated power out. To optimize the overall power output a model was designed to determine the best trade-off between production from two or more renewable energy sources putting emphasis on wind and solar. Different measures of risk, such as coefficient of variation (CV) and value at risk (VAR), were used to determine the best hybrid renewable energy system (HRES) configuration. Depending on the investors’ expected returns (demand) and risk averseness, they will be able to use the model to choose the best configuration that suites their needs. In general it was found that investing in a diversified HRES is better than investing in individual power sources.
- Full Text:
- Date Issued: 2013
- Authors: Ahame, Edmund
- Date: 2013
- Subjects: Renewable energy sources -- Statistics , Diversification in industry
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10564 , http://hdl.handle.net/10948/d1008399 , Renewable energy sources -- Statistics , Diversification in industry
- Description: The growth of the industry and population of South Africa urges to seek new sources of electric power, hence the need to look at alternative power sources. Power output from some renewable energy sources is highly volatile. For instance power output from wind turbines or photovoltaic solar panels fluctuates between zero and the maximum rated power out. To optimize the overall power output a model was designed to determine the best trade-off between production from two or more renewable energy sources putting emphasis on wind and solar. Different measures of risk, such as coefficient of variation (CV) and value at risk (VAR), were used to determine the best hybrid renewable energy system (HRES) configuration. Depending on the investors’ expected returns (demand) and risk averseness, they will be able to use the model to choose the best configuration that suites their needs. In general it was found that investing in a diversified HRES is better than investing in individual power sources.
- Full Text:
- Date Issued: 2013
Creation of clay flameless burner for vaporizing an insect repellent containing pmd as an active ingredient
- Authors: Akwi, Faith Mary
- Date: 2012
- Subjects: Insect baits and repellents , Montmorillonite
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10383 , http://hdl.handle.net/10948/d1008406 , Insect baits and repellents , Montmorillonite
- Description: Insecticide treated mosquito bed nets, insecticide aerosol sprays, repellent lotions and creams, repellent candles, vaporizable repellent essential oils, mosquito mats and coils are some of the many malaria personal protection tools that are in use. The latter of these measures are the most accessible and affordable options for the rural population in sub-Saharan Africa. It is therefore important to determine how effective these personal protection measures are by determining their ability to efficiently disperse an active ingredient when the protection measure is in use. In this study, a copper II oxide montmorillonite clay burner (CuOMontmorillonite clay burner) was created to vaporize repellent formulations containing various concentrations of p-menthane-3,8-diol (PMD) as the active ingredient with the aim of determining the percentage of the active ingredient that is released into the air and the rate of release. The performance of the CuO-Montmorillonite clay burner was also compared to that of the Lampe Berger fragrance burner (LBFB). In addition to this, the percentage of PMD released from 6 percentage wt PMD candles of diameters 40mm, 69mm and 83mm was determined and compared to that released when the CuO-Montmorillonite clay burner and Lampe Berger Fragrance burner where used to vaporize PMD repellent formulations. It was found that the rate of vaporization of the various PMD repellent formulations vaporized using the Lampe Berger fragrance burner is affected by the mass of PMD present in the repellent formulations. The 6 percentage wt PMD repellent candles released the least percentage of PMD as compared to that released when the CuO-Montmorillonite clay burner and the Lampe Berger fragrance burner were used to vaporize the PMD repellent formulations.
- Full Text:
- Date Issued: 2012
- Authors: Akwi, Faith Mary
- Date: 2012
- Subjects: Insect baits and repellents , Montmorillonite
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10383 , http://hdl.handle.net/10948/d1008406 , Insect baits and repellents , Montmorillonite
- Description: Insecticide treated mosquito bed nets, insecticide aerosol sprays, repellent lotions and creams, repellent candles, vaporizable repellent essential oils, mosquito mats and coils are some of the many malaria personal protection tools that are in use. The latter of these measures are the most accessible and affordable options for the rural population in sub-Saharan Africa. It is therefore important to determine how effective these personal protection measures are by determining their ability to efficiently disperse an active ingredient when the protection measure is in use. In this study, a copper II oxide montmorillonite clay burner (CuOMontmorillonite clay burner) was created to vaporize repellent formulations containing various concentrations of p-menthane-3,8-diol (PMD) as the active ingredient with the aim of determining the percentage of the active ingredient that is released into the air and the rate of release. The performance of the CuO-Montmorillonite clay burner was also compared to that of the Lampe Berger fragrance burner (LBFB). In addition to this, the percentage of PMD released from 6 percentage wt PMD candles of diameters 40mm, 69mm and 83mm was determined and compared to that released when the CuO-Montmorillonite clay burner and Lampe Berger Fragrance burner where used to vaporize PMD repellent formulations. It was found that the rate of vaporization of the various PMD repellent formulations vaporized using the Lampe Berger fragrance burner is affected by the mass of PMD present in the repellent formulations. The 6 percentage wt PMD repellent candles released the least percentage of PMD as compared to that released when the CuO-Montmorillonite clay burner and the Lampe Berger fragrance burner were used to vaporize the PMD repellent formulations.
- Full Text:
- Date Issued: 2012
Investigation of the performance of photovoltaic systems
- Authors: Alistoun, Warren James
- Date: 2012
- Subjects: Photovoltaic power systems -- South Africa , Photovoltaic power generation -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10517 , http://hdl.handle.net/10948/d1008396 , Photovoltaic power systems -- South Africa , Photovoltaic power generation -- South Africa
- Description: The main objective of this study was to investigate the performance of grid integrated PV systems. A data acquisition (DAQ) system was developed to monitor the performance of an existing grid integrated PV system with battery storage. This system is referred to as a grid assisted PV system. A data logger was used together with the inverters built in data logger to monitor environmental and electrical data on a grid tie PV system which was deployed during this study. To investigate the performance of these grid integrated PV systems PV and BOS device characterization was performed. This was achieved by using current voltage curve tracers and the DAQ system developed. Energy yield estimations were calculated referring to the literature review and a meteorological reference for comparison with measured energy yields from the grid tie PV system.
- Full Text:
- Date Issued: 2012
- Authors: Alistoun, Warren James
- Date: 2012
- Subjects: Photovoltaic power systems -- South Africa , Photovoltaic power generation -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10517 , http://hdl.handle.net/10948/d1008396 , Photovoltaic power systems -- South Africa , Photovoltaic power generation -- South Africa
- Description: The main objective of this study was to investigate the performance of grid integrated PV systems. A data acquisition (DAQ) system was developed to monitor the performance of an existing grid integrated PV system with battery storage. This system is referred to as a grid assisted PV system. A data logger was used together with the inverters built in data logger to monitor environmental and electrical data on a grid tie PV system which was deployed during this study. To investigate the performance of these grid integrated PV systems PV and BOS device characterization was performed. This was achieved by using current voltage curve tracers and the DAQ system developed. Energy yield estimations were calculated referring to the literature review and a meteorological reference for comparison with measured energy yields from the grid tie PV system.
- Full Text:
- Date Issued: 2012
Gypsum deposits associated with the Whitehill Formation (Ecca Group) in the Steytlerville-Jansenville Area, Southern Karoo, South Africa
- Authors: Almanza, Roberto Daniel
- Date: 2017
- Subjects: Gypsum -- South Africa Concretions -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/15292 , vital:28215
- Description: The Steyterville-Jansenville gypsum field is one of South Africa’s smaller deposits, yet plays host to several gypsum mines, both past and present. This study aims to deconstruct the processes involved in the precipitation of various quantities and grades of gypsum in the lower Ecca Group of the Karoo Supergroup. The calcium and sulphate ions required to form the gypsum mineral (CaSO4•2H2O) are derived from the mid- to lower-shale of the Whitehill Formation, which is carbonate- and pyrite-rich. Gypsum formation is dependent on the availability of pyrite as opposed to calcite, which is in abundance throughout the 30m thick, Early Ufimian (late Permian) Whitehill Formation. Weathered shale, which has been folded and faulted, forms the host environment in which gypsum has precipitated. Folding of the shale occurs as a series of large- and medium-scale anticlines and synclines that strike east to west. These structures, which formed during the Cape Orogeny indicate that stresses were exerted from the south-southwest towards the north-northeast. Folded calcite veins surrounded by amorphous pyrite, observed in thin section suggest that pyrite and calcite were precipitated together prior to a deformation event. Oxidation of pyrite following these deformation events results in the concentration of sulphides within the hinge zones of the folds (weakest zone) and this is where the larger gypsum deposits are found at the surface. Carbonate concretions in the Whitehill Formation up to 5m in length and 3m in width are common in the study area, and suggest a relationship with the deposition of the shale whereby calcium-rich nuclei grew in a concentric fashion during a non-depositional hiatus period. This period is also associated with a higher concentration of pyrite and could explain the occurrence of concretions together with adjacent gypsum-rich shale. Pyrite framboids observed under the Scanning Electron Microscope (SEM) provide evidence to suggest concentric growth of initially deposited microcrystals including nucleation and growth of nodules and concretions observed within the Whitehill Formation. Prerequisites for gypsum formation also include restricted drainage such as a pan, a clay layer in the drainage area and an arid climate where evaporation exceeds precipitation. The preferred surface conditions for gypsum formation would be low-lying areas which are surrounded by gently-sloping topography promoting the concentration of aqueous solutions in a calcite- and pyrite-rich area. Groundwater solution would initially dissolve the calcite and clay minerals, and pyrite and the quartz minerals would remain in the host rock. Areas with greater calcite and clay pores would accommodate more groundwater and thus promote a greater surface area for chemical reactions. This enhances the potential for the oxidation of pyrite to form sulphate ions, which can later combine with calcium ions to precipitate gypsum crystals. Alternatively, the oxidation of pyrite, which produces acidity, dissolves the carbonate host and the calcium- and sulphate-rich solution then precipitates gypsum. The combination of the structural and geomorphological processes is key to the formation of economic gypsum deposits. The potential for extensive gypsum reserves within the Steytlerville-Jansenville field remains valid, provided the target is located over a predominantly weathered Whitehill Formation outcrop, preferably in an area which has undergone extensive deformation (such as a fold hinge zone), and is favourable for the concentration of ground and surface water within a low-lying area.
- Full Text:
- Date Issued: 2017
- Authors: Almanza, Roberto Daniel
- Date: 2017
- Subjects: Gypsum -- South Africa Concretions -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/15292 , vital:28215
- Description: The Steyterville-Jansenville gypsum field is one of South Africa’s smaller deposits, yet plays host to several gypsum mines, both past and present. This study aims to deconstruct the processes involved in the precipitation of various quantities and grades of gypsum in the lower Ecca Group of the Karoo Supergroup. The calcium and sulphate ions required to form the gypsum mineral (CaSO4•2H2O) are derived from the mid- to lower-shale of the Whitehill Formation, which is carbonate- and pyrite-rich. Gypsum formation is dependent on the availability of pyrite as opposed to calcite, which is in abundance throughout the 30m thick, Early Ufimian (late Permian) Whitehill Formation. Weathered shale, which has been folded and faulted, forms the host environment in which gypsum has precipitated. Folding of the shale occurs as a series of large- and medium-scale anticlines and synclines that strike east to west. These structures, which formed during the Cape Orogeny indicate that stresses were exerted from the south-southwest towards the north-northeast. Folded calcite veins surrounded by amorphous pyrite, observed in thin section suggest that pyrite and calcite were precipitated together prior to a deformation event. Oxidation of pyrite following these deformation events results in the concentration of sulphides within the hinge zones of the folds (weakest zone) and this is where the larger gypsum deposits are found at the surface. Carbonate concretions in the Whitehill Formation up to 5m in length and 3m in width are common in the study area, and suggest a relationship with the deposition of the shale whereby calcium-rich nuclei grew in a concentric fashion during a non-depositional hiatus period. This period is also associated with a higher concentration of pyrite and could explain the occurrence of concretions together with adjacent gypsum-rich shale. Pyrite framboids observed under the Scanning Electron Microscope (SEM) provide evidence to suggest concentric growth of initially deposited microcrystals including nucleation and growth of nodules and concretions observed within the Whitehill Formation. Prerequisites for gypsum formation also include restricted drainage such as a pan, a clay layer in the drainage area and an arid climate where evaporation exceeds precipitation. The preferred surface conditions for gypsum formation would be low-lying areas which are surrounded by gently-sloping topography promoting the concentration of aqueous solutions in a calcite- and pyrite-rich area. Groundwater solution would initially dissolve the calcite and clay minerals, and pyrite and the quartz minerals would remain in the host rock. Areas with greater calcite and clay pores would accommodate more groundwater and thus promote a greater surface area for chemical reactions. This enhances the potential for the oxidation of pyrite to form sulphate ions, which can later combine with calcium ions to precipitate gypsum crystals. Alternatively, the oxidation of pyrite, which produces acidity, dissolves the carbonate host and the calcium- and sulphate-rich solution then precipitates gypsum. The combination of the structural and geomorphological processes is key to the formation of economic gypsum deposits. The potential for extensive gypsum reserves within the Steytlerville-Jansenville field remains valid, provided the target is located over a predominantly weathered Whitehill Formation outcrop, preferably in an area which has undergone extensive deformation (such as a fold hinge zone), and is favourable for the concentration of ground and surface water within a low-lying area.
- Full Text:
- Date Issued: 2017
An architecutre for the effective use of mobile devices in supporting contact learning
- Authors: Alnseerat, Nemr
- Date: 2014
- Subjects: Mobile communication systems in education , Educational technology
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10490 , http://hdl.handle.net/10948/d1020079
- Description: The features and capacities of mobile devices offer a wide range of significant opportunities for providing learning content in workplaces and educational institutions. This new approach of teaching, called mobile learning, allows for the delivery of learning content on the move at any time. Mobile learning supports learning by producing learning content to learners in a modern and acceptable way. The number of mobile learning applications has increased rapidly in educational environments. There are, however, limited mobile learning applications that take advantage of mobile devices to support contact learning in the classroom environment. The aim of this research was to design a mobile learning architecture to effectively support contact learning in the classroom. The researcher investigated the historical and theoretical background of mobile learning and reported these findings. This included an overview of existing mobile learning architectures. After identifying their limitations, the researcher designed the Contact Instruction Mobile Learning Architecture (CIMLA) to facilitate the use of mobile devices in the classroom. The researcher developed the LiveLearning prototype based on the proposed architecture as a proof of concept. He conducted a usability evaluation in order to determine the usability of LiveLearning. The results indicated that the LiveLearning prototype is effective in supporting contact learning in the classroom.
- Full Text:
- Date Issued: 2014
- Authors: Alnseerat, Nemr
- Date: 2014
- Subjects: Mobile communication systems in education , Educational technology
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10490 , http://hdl.handle.net/10948/d1020079
- Description: The features and capacities of mobile devices offer a wide range of significant opportunities for providing learning content in workplaces and educational institutions. This new approach of teaching, called mobile learning, allows for the delivery of learning content on the move at any time. Mobile learning supports learning by producing learning content to learners in a modern and acceptable way. The number of mobile learning applications has increased rapidly in educational environments. There are, however, limited mobile learning applications that take advantage of mobile devices to support contact learning in the classroom environment. The aim of this research was to design a mobile learning architecture to effectively support contact learning in the classroom. The researcher investigated the historical and theoretical background of mobile learning and reported these findings. This included an overview of existing mobile learning architectures. After identifying their limitations, the researcher designed the Contact Instruction Mobile Learning Architecture (CIMLA) to facilitate the use of mobile devices in the classroom. The researcher developed the LiveLearning prototype based on the proposed architecture as a proof of concept. He conducted a usability evaluation in order to determine the usability of LiveLearning. The results indicated that the LiveLearning prototype is effective in supporting contact learning in the classroom.
- Full Text:
- Date Issued: 2014
A natural user interface architecture using gestures to facilitate the detection of fundamental movement skills
- Authors: Amanzi, Richard
- Date: 2015
- Subjects: Human activity recognition , Human-computer interaction
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/6204 , vital:21055
- Description: Fundamental movement skills (FMSs) are considered to be one of the essential phases of motor skill development. The proper development of FMSs allows children to participate in more advanced forms of movements and sports. To be able to perform an FMS correctly, children need to learn the right way of performing it. By making use of technology, a system can be developed that can help facilitate the learning of FMSs. The objective of the research was to propose an effective natural user interface (NUI) architecture for detecting FMSs using the Kinect. In order to achieve the stated objective, an investigation into FMSs and the challenges faced when teaching them was presented. An investigation into NUIs was also presented including the merits of the Kinect as the most appropriate device to be used to facilitate the detection of an FMS. An NUI architecture was proposed that uses the Kinect to facilitate the detection of an FMS. A framework was implemented from the design of the architecture. The successful implementation of the framework provides evidence that the design of the proposed architecture is feasible. An instance of the framework incorporating the jump FMS was used as a case study in the development of a prototype that detects the correct and incorrect performance of a jump. The evaluation of the prototype proved the following: - The developed prototype was effective in detecting the correct and incorrect performance of the jump FMS; and - The implemented framework was robust for the incorporation of an FMS. The successful implementation of the prototype shows that an effective NUI architecture using the Kinect can be used to facilitate the detection of FMSs. The proposed architecture provides a structured way of developing a system using the Kinect to facilitate the detection of FMSs. This allows developers to add future FMSs to the system. This dissertation therefore makes the following contributions: - An experimental design to evaluate the effectiveness of a prototype that detects FMSs - A robust framework that incorporates FMSs; and - An effective NUI architecture to facilitate the detection of fundamental movement skills using the Kinect.
- Full Text:
- Date Issued: 2015
- Authors: Amanzi, Richard
- Date: 2015
- Subjects: Human activity recognition , Human-computer interaction
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/6204 , vital:21055
- Description: Fundamental movement skills (FMSs) are considered to be one of the essential phases of motor skill development. The proper development of FMSs allows children to participate in more advanced forms of movements and sports. To be able to perform an FMS correctly, children need to learn the right way of performing it. By making use of technology, a system can be developed that can help facilitate the learning of FMSs. The objective of the research was to propose an effective natural user interface (NUI) architecture for detecting FMSs using the Kinect. In order to achieve the stated objective, an investigation into FMSs and the challenges faced when teaching them was presented. An investigation into NUIs was also presented including the merits of the Kinect as the most appropriate device to be used to facilitate the detection of an FMS. An NUI architecture was proposed that uses the Kinect to facilitate the detection of an FMS. A framework was implemented from the design of the architecture. The successful implementation of the framework provides evidence that the design of the proposed architecture is feasible. An instance of the framework incorporating the jump FMS was used as a case study in the development of a prototype that detects the correct and incorrect performance of a jump. The evaluation of the prototype proved the following: - The developed prototype was effective in detecting the correct and incorrect performance of the jump FMS; and - The implemented framework was robust for the incorporation of an FMS. The successful implementation of the prototype shows that an effective NUI architecture using the Kinect can be used to facilitate the detection of FMSs. The proposed architecture provides a structured way of developing a system using the Kinect to facilitate the detection of FMSs. This allows developers to add future FMSs to the system. This dissertation therefore makes the following contributions: - An experimental design to evaluate the effectiveness of a prototype that detects FMSs - A robust framework that incorporates FMSs; and - An effective NUI architecture to facilitate the detection of fundamental movement skills using the Kinect.
- Full Text:
- Date Issued: 2015
The effect of ozone on the production of broiler
- Authors: Amwele, Hilma Rantilla
- Date: 2004
- Subjects: Broilers (Chickens) , Ozone
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10585 , http://hdl.handle.net/10948/226 , Broilers (Chickens) , Ozone
- Description: The aim of the study was to evaluate the effect of ozone (O3) on mature body weight (MBW), feed conversion rate (FCR), mortality rate (MR) and ammonia (NH3) production of broiler chickens (referred to as “broilers” in this thesis) under controlled conditions. Ozone was used for the purifying of air and water in order to eliminate harmful microorganisms. Two trials were conducted over a twelve week production period. In experiment 1, day old broiler chicks were randomly allocated to a control (n=130) and treatment (n=130) group. The treatment groups were exposed to ozone continuously for the entire period of the trial. Both air and water were ozonated on a 24 hours daily basis, while the control group was reared under normal commercial conditions. In experiment 2: day old broiler chicks were randomly allocated to a control (n=123) and a treatment (n=123) group. The treatment group was exposed to ozone for 3 hours per day for the entire period of the trial. Both air and water were ozonated, where the air was treated for 3 hours/day and the water for 1 hour/day during the entire production period. The control group was reared under normal commercial conditions. The results indicate that broilers exposed to continuous O3 (0.1 ppm) conditions had significantly higher (P< 0.001) mortality rates than the control group. The treatment group had a mortality rate of 55.38% compared to the 5.38% for the control group. No significant difference (P= 0. 2468) for MBW was found between the broilers that were reared in the O3 environment compared to the control iii group. Although the control group were on average 200g heavier at the end of the trial. No significant difference (p = 0. 6143) was recorded in FCR between the O3 and control groups. However the FCR of the broilers treated with O3 was lower by 100g than that of the control group. The O3 significantly (P< 0. 0001) reduced the NH3 in the treatment group. When the trial was repeated with limited exposure to an O3 environment there was no significant difference in MBW (P = 0. 0979), FCR (P = 0. 8913) and MR (P = 0. 1108) between the treatment and control groups. However, ammonia levels were lower in the treatment group compared to the control group. When the data was further analyzed comparing the two trials, the results indicated that there was no significant difference (P = 0. 4112) in the MBW for the broilers reared under normal conditions (control group) from experiment 1 and experiment 2, while a significant difference (P = 0. 0002) was recorded between the broilers reared under continuous O3 and regulated O3 conditions from experiment 1 and experiment 2 respectively. When the FCR data was analyzed using the Gompertz equation a significant difference (P = 0.0403) in the FCR of broilers reared in the control group between experiment 1 and experiment 2 was recorded (Table 8). No significant difference (P = 0.3226) in the FCR of broilers raised under O3 conditions of continuous and regulated O3 production were reported between experiment 1 and experiment 2. A highly significant difference (P = 0. 0001) in the MR of broilers reared under ozone conditions was recorded between experiment 1 and experiment 2. In experiment 1, the MR was 55.38% while in experiment 2 the MR was only 8.78%. A significant difference (P = 0.0355) was also recorded in the MR of broilers that iv were raised in the control groups between experiment 1 and experiment 2. The MR for broilers in the control group was 5.38% in experiment 1 and for experiment 2 it was 9.74%. The mortality rate of broilers raised in the control groups conditions increased by approximately 4% points or 81% between experiment 1 and experiment 2. The level (0.1 ppm) of ozone production had a limited effect on the MBW and FCR of broilers, however it is evident that ozone is toxic to broilers when they are exposed to a continuous ozonated environment. Ozone was however effective in controlling ammonia levels.
- Full Text:
- Date Issued: 2004
- Authors: Amwele, Hilma Rantilla
- Date: 2004
- Subjects: Broilers (Chickens) , Ozone
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10585 , http://hdl.handle.net/10948/226 , Broilers (Chickens) , Ozone
- Description: The aim of the study was to evaluate the effect of ozone (O3) on mature body weight (MBW), feed conversion rate (FCR), mortality rate (MR) and ammonia (NH3) production of broiler chickens (referred to as “broilers” in this thesis) under controlled conditions. Ozone was used for the purifying of air and water in order to eliminate harmful microorganisms. Two trials were conducted over a twelve week production period. In experiment 1, day old broiler chicks were randomly allocated to a control (n=130) and treatment (n=130) group. The treatment groups were exposed to ozone continuously for the entire period of the trial. Both air and water were ozonated on a 24 hours daily basis, while the control group was reared under normal commercial conditions. In experiment 2: day old broiler chicks were randomly allocated to a control (n=123) and a treatment (n=123) group. The treatment group was exposed to ozone for 3 hours per day for the entire period of the trial. Both air and water were ozonated, where the air was treated for 3 hours/day and the water for 1 hour/day during the entire production period. The control group was reared under normal commercial conditions. The results indicate that broilers exposed to continuous O3 (0.1 ppm) conditions had significantly higher (P< 0.001) mortality rates than the control group. The treatment group had a mortality rate of 55.38% compared to the 5.38% for the control group. No significant difference (P= 0. 2468) for MBW was found between the broilers that were reared in the O3 environment compared to the control iii group. Although the control group were on average 200g heavier at the end of the trial. No significant difference (p = 0. 6143) was recorded in FCR between the O3 and control groups. However the FCR of the broilers treated with O3 was lower by 100g than that of the control group. The O3 significantly (P< 0. 0001) reduced the NH3 in the treatment group. When the trial was repeated with limited exposure to an O3 environment there was no significant difference in MBW (P = 0. 0979), FCR (P = 0. 8913) and MR (P = 0. 1108) between the treatment and control groups. However, ammonia levels were lower in the treatment group compared to the control group. When the data was further analyzed comparing the two trials, the results indicated that there was no significant difference (P = 0. 4112) in the MBW for the broilers reared under normal conditions (control group) from experiment 1 and experiment 2, while a significant difference (P = 0. 0002) was recorded between the broilers reared under continuous O3 and regulated O3 conditions from experiment 1 and experiment 2 respectively. When the FCR data was analyzed using the Gompertz equation a significant difference (P = 0.0403) in the FCR of broilers reared in the control group between experiment 1 and experiment 2 was recorded (Table 8). No significant difference (P = 0.3226) in the FCR of broilers raised under O3 conditions of continuous and regulated O3 production were reported between experiment 1 and experiment 2. A highly significant difference (P = 0. 0001) in the MR of broilers reared under ozone conditions was recorded between experiment 1 and experiment 2. In experiment 1, the MR was 55.38% while in experiment 2 the MR was only 8.78%. A significant difference (P = 0.0355) was also recorded in the MR of broilers that iv were raised in the control groups between experiment 1 and experiment 2. The MR for broilers in the control group was 5.38% in experiment 1 and for experiment 2 it was 9.74%. The mortality rate of broilers raised in the control groups conditions increased by approximately 4% points or 81% between experiment 1 and experiment 2. The level (0.1 ppm) of ozone production had a limited effect on the MBW and FCR of broilers, however it is evident that ozone is toxic to broilers when they are exposed to a continuous ozonated environment. Ozone was however effective in controlling ammonia levels.
- Full Text:
- Date Issued: 2004
A hybrid approach to beach erosion mitigation and amenity enhancement, St Francis Bay, South Africa
- Authors: Anderson, Dylan Rory
- Date: 2008
- Subjects: Beach erosion -- South Africa -- St Francis Bay , Shore protection -- South Africa -- St Francis Bay , Restoration ecology
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10611 , http://hdl.handle.net/10948/d1008192 , Beach erosion -- South Africa -- St Francis Bay , Shore protection -- South Africa -- St Francis Bay , Restoration ecology
- Description: The St Francis Bay beach has experienced chronic erosion over the past three decades. This erosion can largely be attributed to the stabilisation of a large coastal dunefield which contributed +/- 80 percent of the sand supply to St Francis Bay. Stabilisation began in 1975 initially using plant cuttings and followed by the development of the Santareme holiday suburb resulting in complete stabilisation by 1985. Effects were felt from the late 1970‟s and since then the beach has retreated at between 0.5 - 3 m.yr-1. Erosion has encroached on beachfront properties since the early 1990‟s, leading to the placement of 3-4 m high unsightly rock revetments along much of the beach. Where properly maintained these structures have proved successful in protecting the properties behind, however exacerbated erosion of areas in front and adjacent to these structures is evident. Currently no dry beach is present at high tide for most of the year, leading to a significant reduction in beach amenity value. Several technical studies to investigate remediation of this beach erosion problem have been conducted since the early 1990‟s. This study includes investigations into the processes and dynamics of the existing environment and evaluation of the effectiveness and impacts of several elements of a hybrid approach to coastal protection and amenity enhancement for St Francis Bay beach. This proposal incorporated: Multi-Purpose Reefs (MPR‟s) offshore, for coastal protection and amenity enhancement in terms of surfing; beach nourishment with sand from the Kromme Estuary and dune rehabilitation with appropriate native sand binding species. Extensive fieldwork and data collection were conducted, this included: a series of bathymetric surveys; diving surveys and a helicopter flight; sediment sampling; beach profiling and deployment of a wave/current meter. Analysis of these data provided a greater understanding of the existing environment and dynamics of St Francis Bay and provided reliable inputs for numerical modelling. Numerical and physical modelling was conducted to assess the existing processes and conduct MPR design testing. In addition calibrated hydrodynamic modelling of the Kromme Estuary was conducted in order to assess the impacts of sand extraction from the large sand banks within the mouth of the Kromme Estuary for use as beach nourishment. Comparison of bathymetric survey data collected by the author in 2005/06 with survey data collected by the South African Navy Hydrographic Office (SANHO) in 1952 suggest a major loss of sand from the bay, with a volume difference of some 8.8 X 106 m3 calculated. Greater losses were measured between 10-15 m water depths, with shallow areas of +/- 5 m water depth, remaining more stable. This can be attributed to the presence of shallow reef and rocky substrate through much of the bay at this depth range. Monthly RTK GPS survey data from September 2006 to September 2007 indicates a total loss of 40 000 m3 over this period with the greatest losses measured along the northern part of the beach. The greatest losses were measured after large long period waves from a southerly to south-easterly direction occurred in conjunction with equinox tides in mid March 2007. Sediment sampling at over 100 locations within the bay indicated a high percentage of reef (26 percent) and fairly consistent grain size in the fine to medium size class throughout much of the beach, bay and large sand bank within the estuary. While the majority of the South African Coast is exposed to the predominant south westerly winds and waves, St Francis Bay‟s orientation means that waves from a south easterly to easterly direction dominate. The results of the detailed numerical modelling of the hydrodynamics agree with previous calculations and modelling results which concluded that strong unidirectional longshore currents occur along the headland due to the oblique angle of wave incidence and the close to parallel angle of wave incidence along the beach leads to weak longshore currents of variable direction. Erosion along St Francis Bay beach is a result of cross-shore erosion due to large waves from a southerly to easterly direction. Detached breakwaters are the most effective form of coastal protection in these environments and MPR‟s offer additional benefits over traditional breakwater structures. Results of empirical calculations and numerical modelling indicate that the MPR‟s will provide effective coastal protection through the processes of wave dissipation, wave rotation, salient formation and alteration of nearshore circulation. Physical modelling results allowed the MPR design to be assessed and refined in terms of surfing amenity enhancement and construction constraints. In addition numerical modelling results indicate that impacts due to the extraction of up to 600 000 m3 of sand from the lower Kromme Estuary result in highly localised velocity reduction, mainly limited to the extraction areas. The calculated rate of sediment influx into the lower Kromme Estuary indicates that limited extraction, in the order of 20 000 – 40 000 m3 per year, should be sustainable in the long term. Sedimentation of the lower estuary over recent years has had negative recreational and ecological impacts, through reduced navigability and water exchange respectively. Therefore both the estuary and beach systems prove to benefit from this approach. Although not investigated in detail as part of this study, evidence from numerous projects worldwide indicates that foredunes help to trap wind-blown sand on the beach and form a buffer to storm erosion, therefore dune rehabilitation with native sand-binding plant species was recommended as the third element of the proposed remediation of St Francis Bay beach.
- Full Text:
- Date Issued: 2008
- Authors: Anderson, Dylan Rory
- Date: 2008
- Subjects: Beach erosion -- South Africa -- St Francis Bay , Shore protection -- South Africa -- St Francis Bay , Restoration ecology
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10611 , http://hdl.handle.net/10948/d1008192 , Beach erosion -- South Africa -- St Francis Bay , Shore protection -- South Africa -- St Francis Bay , Restoration ecology
- Description: The St Francis Bay beach has experienced chronic erosion over the past three decades. This erosion can largely be attributed to the stabilisation of a large coastal dunefield which contributed +/- 80 percent of the sand supply to St Francis Bay. Stabilisation began in 1975 initially using plant cuttings and followed by the development of the Santareme holiday suburb resulting in complete stabilisation by 1985. Effects were felt from the late 1970‟s and since then the beach has retreated at between 0.5 - 3 m.yr-1. Erosion has encroached on beachfront properties since the early 1990‟s, leading to the placement of 3-4 m high unsightly rock revetments along much of the beach. Where properly maintained these structures have proved successful in protecting the properties behind, however exacerbated erosion of areas in front and adjacent to these structures is evident. Currently no dry beach is present at high tide for most of the year, leading to a significant reduction in beach amenity value. Several technical studies to investigate remediation of this beach erosion problem have been conducted since the early 1990‟s. This study includes investigations into the processes and dynamics of the existing environment and evaluation of the effectiveness and impacts of several elements of a hybrid approach to coastal protection and amenity enhancement for St Francis Bay beach. This proposal incorporated: Multi-Purpose Reefs (MPR‟s) offshore, for coastal protection and amenity enhancement in terms of surfing; beach nourishment with sand from the Kromme Estuary and dune rehabilitation with appropriate native sand binding species. Extensive fieldwork and data collection were conducted, this included: a series of bathymetric surveys; diving surveys and a helicopter flight; sediment sampling; beach profiling and deployment of a wave/current meter. Analysis of these data provided a greater understanding of the existing environment and dynamics of St Francis Bay and provided reliable inputs for numerical modelling. Numerical and physical modelling was conducted to assess the existing processes and conduct MPR design testing. In addition calibrated hydrodynamic modelling of the Kromme Estuary was conducted in order to assess the impacts of sand extraction from the large sand banks within the mouth of the Kromme Estuary for use as beach nourishment. Comparison of bathymetric survey data collected by the author in 2005/06 with survey data collected by the South African Navy Hydrographic Office (SANHO) in 1952 suggest a major loss of sand from the bay, with a volume difference of some 8.8 X 106 m3 calculated. Greater losses were measured between 10-15 m water depths, with shallow areas of +/- 5 m water depth, remaining more stable. This can be attributed to the presence of shallow reef and rocky substrate through much of the bay at this depth range. Monthly RTK GPS survey data from September 2006 to September 2007 indicates a total loss of 40 000 m3 over this period with the greatest losses measured along the northern part of the beach. The greatest losses were measured after large long period waves from a southerly to south-easterly direction occurred in conjunction with equinox tides in mid March 2007. Sediment sampling at over 100 locations within the bay indicated a high percentage of reef (26 percent) and fairly consistent grain size in the fine to medium size class throughout much of the beach, bay and large sand bank within the estuary. While the majority of the South African Coast is exposed to the predominant south westerly winds and waves, St Francis Bay‟s orientation means that waves from a south easterly to easterly direction dominate. The results of the detailed numerical modelling of the hydrodynamics agree with previous calculations and modelling results which concluded that strong unidirectional longshore currents occur along the headland due to the oblique angle of wave incidence and the close to parallel angle of wave incidence along the beach leads to weak longshore currents of variable direction. Erosion along St Francis Bay beach is a result of cross-shore erosion due to large waves from a southerly to easterly direction. Detached breakwaters are the most effective form of coastal protection in these environments and MPR‟s offer additional benefits over traditional breakwater structures. Results of empirical calculations and numerical modelling indicate that the MPR‟s will provide effective coastal protection through the processes of wave dissipation, wave rotation, salient formation and alteration of nearshore circulation. Physical modelling results allowed the MPR design to be assessed and refined in terms of surfing amenity enhancement and construction constraints. In addition numerical modelling results indicate that impacts due to the extraction of up to 600 000 m3 of sand from the lower Kromme Estuary result in highly localised velocity reduction, mainly limited to the extraction areas. The calculated rate of sediment influx into the lower Kromme Estuary indicates that limited extraction, in the order of 20 000 – 40 000 m3 per year, should be sustainable in the long term. Sedimentation of the lower estuary over recent years has had negative recreational and ecological impacts, through reduced navigability and water exchange respectively. Therefore both the estuary and beach systems prove to benefit from this approach. Although not investigated in detail as part of this study, evidence from numerous projects worldwide indicates that foredunes help to trap wind-blown sand on the beach and form a buffer to storm erosion, therefore dune rehabilitation with native sand-binding plant species was recommended as the third element of the proposed remediation of St Francis Bay beach.
- Full Text:
- Date Issued: 2008
Incidence of bacterial infections and colonisation in patients admitted to a tuberculosis hospital
- Authors: Annear, Dale John
- Date: 2018
- Subjects: Medical microbiology , Microbiology Bacteriology Tuberculosis -- Hospitals -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/21482 , vital:29526
- Description: Patients with drug resistant tuberculosis (TB) are treated with multiple antibiotics including moxifloxacin, linezolid, and meropenem, which puts them at greater risk for colonisation by multi-drug resistant (MDR) bacteria. The objectives of this study were to: (i) assess the antimicrobial prescribing patterns practiced within the hospital by retrospective patient file review; (ii) determine the spectrum of bacterial colonisation in TB patients upon admission and during hospitalisation; (iii) identify bacterial isolates and evaluate antimicrobial susceptibility profiles; (iv) detect antimicrobial resistance genes in the bacterial isolates by PCR and DNA sequencing; and (v) investigate genetic relatedness of Klebsiella pneumoniae isolates using Multi Locus Sequence Typing. Nasal, groin and rectal swabs [for the detection of extended spectrum beta lactamases (EBSLs), carbapenem-resistant Enterobacteriaceae (CRE), vancomycin-resistant enterococci (VRE) and methicillin-resistant Staphylococcus aureus (MRSA)] were analysed from a cohort of patients (n=37) admitted either from the community (n = 28) or from other healthcare facilities (n=9) to a TB hospital. Swab samples were collected at admission and at four week intervals thereafter during hospitalization. Identification and antimicrobial susceptibility testing of bacterial isolates (n=62) were determined at the National Health Laboratory Services (NHLS) by the VITEK-MS and Vitek 2 systems respectively. Additional antimicrobial susceptibility testing was conducted by Sensititre Gram Negative Xtra (GNFX2) MIC plates. PCR and DNA sequencing were used for detection of resistance genes. Patients (n=13/37; 35%) were colonized by MDR bacteria (ESBLs [n=11], MRSA [n=2]) on admission. Colonization rates were lower in patients admitted from the community (9/28; 32%) compared to those transferred from other healthcare facilities (4/9; 44%). All admitted patients who did not exhibit colonization at baseline and who were resident within the hospital for longer than 4 weeks (17/37; 46% of total patients) became colonised by an ESBL-producing Enterobacteriaceae species. No patients acquired MRSA during hospitalisation. Among ESBL Enterobacteriaceae, Escherichia coli (41/62; 66%) and K. pneumoniae [14/62; 23%]) predominated. Nineteen percent (7/37) of patients demised during their hospitalization. Both the Vitek system and Sensititre Gram Negative Xtra (GNFX2) MIC plates susceptibilities were similar for most antimicrobials, however there were discrepancies for tigecycline susceptibility profiles. A high number of isolates exhibited resistance to aminoglycosides and fluoroquinolones. Genes encoding for ESBLs (CTX-M-14, CTX-M-15, SHV-28, OXA-1, and OXY-2-9) were detected among ESBL Enterobacteriaceae. Two Enterobacteriaceae isolates with reduced carbapenem susceptibility did not contain carbapenemase-encoding genes. MLST revealed unique sequence types and genetic diversity among the K. pneumoniae isolates from hospitalised patients. However, the source and colonization routes of these isolates could not be determined, which requires further investigation. This study provides insight into the spectrum of bacterial pathogen colonisation in hospitalised TB patients and suggests a review of infection control programs and practices at the TB hospital.
- Full Text:
- Date Issued: 2018
- Authors: Annear, Dale John
- Date: 2018
- Subjects: Medical microbiology , Microbiology Bacteriology Tuberculosis -- Hospitals -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/21482 , vital:29526
- Description: Patients with drug resistant tuberculosis (TB) are treated with multiple antibiotics including moxifloxacin, linezolid, and meropenem, which puts them at greater risk for colonisation by multi-drug resistant (MDR) bacteria. The objectives of this study were to: (i) assess the antimicrobial prescribing patterns practiced within the hospital by retrospective patient file review; (ii) determine the spectrum of bacterial colonisation in TB patients upon admission and during hospitalisation; (iii) identify bacterial isolates and evaluate antimicrobial susceptibility profiles; (iv) detect antimicrobial resistance genes in the bacterial isolates by PCR and DNA sequencing; and (v) investigate genetic relatedness of Klebsiella pneumoniae isolates using Multi Locus Sequence Typing. Nasal, groin and rectal swabs [for the detection of extended spectrum beta lactamases (EBSLs), carbapenem-resistant Enterobacteriaceae (CRE), vancomycin-resistant enterococci (VRE) and methicillin-resistant Staphylococcus aureus (MRSA)] were analysed from a cohort of patients (n=37) admitted either from the community (n = 28) or from other healthcare facilities (n=9) to a TB hospital. Swab samples were collected at admission and at four week intervals thereafter during hospitalization. Identification and antimicrobial susceptibility testing of bacterial isolates (n=62) were determined at the National Health Laboratory Services (NHLS) by the VITEK-MS and Vitek 2 systems respectively. Additional antimicrobial susceptibility testing was conducted by Sensititre Gram Negative Xtra (GNFX2) MIC plates. PCR and DNA sequencing were used for detection of resistance genes. Patients (n=13/37; 35%) were colonized by MDR bacteria (ESBLs [n=11], MRSA [n=2]) on admission. Colonization rates were lower in patients admitted from the community (9/28; 32%) compared to those transferred from other healthcare facilities (4/9; 44%). All admitted patients who did not exhibit colonization at baseline and who were resident within the hospital for longer than 4 weeks (17/37; 46% of total patients) became colonised by an ESBL-producing Enterobacteriaceae species. No patients acquired MRSA during hospitalisation. Among ESBL Enterobacteriaceae, Escherichia coli (41/62; 66%) and K. pneumoniae [14/62; 23%]) predominated. Nineteen percent (7/37) of patients demised during their hospitalization. Both the Vitek system and Sensititre Gram Negative Xtra (GNFX2) MIC plates susceptibilities were similar for most antimicrobials, however there were discrepancies for tigecycline susceptibility profiles. A high number of isolates exhibited resistance to aminoglycosides and fluoroquinolones. Genes encoding for ESBLs (CTX-M-14, CTX-M-15, SHV-28, OXA-1, and OXY-2-9) were detected among ESBL Enterobacteriaceae. Two Enterobacteriaceae isolates with reduced carbapenem susceptibility did not contain carbapenemase-encoding genes. MLST revealed unique sequence types and genetic diversity among the K. pneumoniae isolates from hospitalised patients. However, the source and colonization routes of these isolates could not be determined, which requires further investigation. This study provides insight into the spectrum of bacterial pathogen colonisation in hospitalised TB patients and suggests a review of infection control programs and practices at the TB hospital.
- Full Text:
- Date Issued: 2018
Cytokine signalling functions of human soluble IgE receptors in peripheral blood mononuclear cells from normal and hyper-allergic individuals and in B-lymphoblastoid and monocytic cell lines
- Authors: Askew, Sandra Lyn
- Date: 2006
- Subjects: Ligands , Cell receptors , Cellular signal transduction
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10305 , http://hdl.handle.net/10948/455 , Ligands , Cell receptors , Cellular signal transduction
- Description: CD23 is a multifunctional receptor/ligand, found in a variety of cell types, such as human peripheral blood mononuclear cells (PBMCs), B-lymphoblastoid cell lines, mast cells and basophils. It is also found on a variety of haematopoietic cell lines. As the low-affinity receptor for immunoglobulin E (IgE), CD23 plays a role in antigen-presentation and macrophage activation. As a surface molecule cleaved from the cell membrane, soluble CD23 (sCD23) can act as an adhesion molecule and a cytokine. Perturbances of such molecular interactions may lead to various diseases such as allergies and other inflammatory diseases. It has been speculated that elevated levels of sCD23 may be used to bind secreted IgE, thus preventing it from binding to membrane CD23 on haematopoietic cells, preventing B cells from being activated into IgE producing cells. Signal transduction by sCD23 is dependent on cell subsets, ligands and co-factors required for its function. sCD23 plays a direct role in inducing tumour necrosis factor alpha (TNFα), interleukin-1 alpha (IL-1α) and interleukin-1 beta (IL-1β) and soluble IL-1 receptor from activated human monocytes and PBMCs in vitro. Recombinant forms of 25 and 37 kDa human sCD23 were produced by polymerase chain reaction (PCR)-cloning into pET23a, a bacterial expression vector. The proteins were expressed and refolded, followed by purification by gel filtration chromatography. The purified proteins were biochemically characterized to ensure purity and biological activity, by observing the binding to human IgE both in enzyme-linked immunosorbant assay (ELISA) and surface plasmon resonance (SPR) spectroscopy. ELISA showed KD values of 7.23 x 10-9M and 8.12 x 10-9M for the 25 and 37 kDa proteins, respectively. These values were significantly lower than that of Hibbert et al., (2005). SPR data obtained for the 25 kDa CD23 was not of reliable quality but SPR for the 33kDa sCD23 showed a KD of 1.18 x 10-7M, close to that of Hibbert et al., (2005), J. Exp. Med, 202: 751-760. To test the therapeutic potential of the recombinant molecule, a B-lymphoblastoid cell line (Raji), a pre-monocytic cell line (U937), and PBMCs from normal and hyper-allergic individuals were used. All cells showed no change in production of cytokines. It is essential to investigate further cytokine functions and production implicated by recombinant forms of sCD23, as well as binding of sCD23 to CD21 and CD11b/c, and in vivo IgE regulation before a conclusion can be drawn as to whether recombinant sCD23 is a potential therapeutic target against allergic disease.
- Full Text:
- Date Issued: 2006
- Authors: Askew, Sandra Lyn
- Date: 2006
- Subjects: Ligands , Cell receptors , Cellular signal transduction
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10305 , http://hdl.handle.net/10948/455 , Ligands , Cell receptors , Cellular signal transduction
- Description: CD23 is a multifunctional receptor/ligand, found in a variety of cell types, such as human peripheral blood mononuclear cells (PBMCs), B-lymphoblastoid cell lines, mast cells and basophils. It is also found on a variety of haematopoietic cell lines. As the low-affinity receptor for immunoglobulin E (IgE), CD23 plays a role in antigen-presentation and macrophage activation. As a surface molecule cleaved from the cell membrane, soluble CD23 (sCD23) can act as an adhesion molecule and a cytokine. Perturbances of such molecular interactions may lead to various diseases such as allergies and other inflammatory diseases. It has been speculated that elevated levels of sCD23 may be used to bind secreted IgE, thus preventing it from binding to membrane CD23 on haematopoietic cells, preventing B cells from being activated into IgE producing cells. Signal transduction by sCD23 is dependent on cell subsets, ligands and co-factors required for its function. sCD23 plays a direct role in inducing tumour necrosis factor alpha (TNFα), interleukin-1 alpha (IL-1α) and interleukin-1 beta (IL-1β) and soluble IL-1 receptor from activated human monocytes and PBMCs in vitro. Recombinant forms of 25 and 37 kDa human sCD23 were produced by polymerase chain reaction (PCR)-cloning into pET23a, a bacterial expression vector. The proteins were expressed and refolded, followed by purification by gel filtration chromatography. The purified proteins were biochemically characterized to ensure purity and biological activity, by observing the binding to human IgE both in enzyme-linked immunosorbant assay (ELISA) and surface plasmon resonance (SPR) spectroscopy. ELISA showed KD values of 7.23 x 10-9M and 8.12 x 10-9M for the 25 and 37 kDa proteins, respectively. These values were significantly lower than that of Hibbert et al., (2005). SPR data obtained for the 25 kDa CD23 was not of reliable quality but SPR for the 33kDa sCD23 showed a KD of 1.18 x 10-7M, close to that of Hibbert et al., (2005), J. Exp. Med, 202: 751-760. To test the therapeutic potential of the recombinant molecule, a B-lymphoblastoid cell line (Raji), a pre-monocytic cell line (U937), and PBMCs from normal and hyper-allergic individuals were used. All cells showed no change in production of cytokines. It is essential to investigate further cytokine functions and production implicated by recombinant forms of sCD23, as well as binding of sCD23 to CD21 and CD11b/c, and in vivo IgE regulation before a conclusion can be drawn as to whether recombinant sCD23 is a potential therapeutic target against allergic disease.
- Full Text:
- Date Issued: 2006
A statistical evaluation and analysis of mosquito repellent combination
- Authors: Asquith, Ilse Bernadette
- Date: 2004
- Subjects: Mosquitoes -- Control , Insect baits and repellents
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10422 , http://hdl.handle.net/10948/d1015732
- Description: The present product development project was aimed at studying the synergism and/or antagonism amongst various known insect repellent actives with the view to formulating a multi-active repellent product with improved properties when compared to current single-active commercial products. Advanced statistical methods were used to identify synergism between individual active substances and to define a formulation as close as possible to the “ideal” formulation. Several mosquito repellent samples were prepared and sent to the South African Bureau of Standards (SABS) in Pretoria to test for their efficiency in repelling mosquitoes. From the results of the repellency tests of the various active combinations, three actives were identified that showed promising signs of synergism. These actives were then studied in further detail to determine their optimum combination. In addition, it was shown that when using a natural flavourant as promoter and incorporating a slow-release agent into formulations for aerosols and lotions, a product is obtained that gives comparable levels of efficiency to current commercial products, but at much reduced levels of active loading. Accelerated stability tests performed on the final combination of the three actives used in the final formulation showed no adverse reactions over a three-week study. These tests shall be repeated once the final application form (lotion, aerosol, etc) and product packing have been decided.
- Full Text:
- Date Issued: 2004
- Authors: Asquith, Ilse Bernadette
- Date: 2004
- Subjects: Mosquitoes -- Control , Insect baits and repellents
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10422 , http://hdl.handle.net/10948/d1015732
- Description: The present product development project was aimed at studying the synergism and/or antagonism amongst various known insect repellent actives with the view to formulating a multi-active repellent product with improved properties when compared to current single-active commercial products. Advanced statistical methods were used to identify synergism between individual active substances and to define a formulation as close as possible to the “ideal” formulation. Several mosquito repellent samples were prepared and sent to the South African Bureau of Standards (SABS) in Pretoria to test for their efficiency in repelling mosquitoes. From the results of the repellency tests of the various active combinations, three actives were identified that showed promising signs of synergism. These actives were then studied in further detail to determine their optimum combination. In addition, it was shown that when using a natural flavourant as promoter and incorporating a slow-release agent into formulations for aerosols and lotions, a product is obtained that gives comparable levels of efficiency to current commercial products, but at much reduced levels of active loading. Accelerated stability tests performed on the final combination of the three actives used in the final formulation showed no adverse reactions over a three-week study. These tests shall be repeated once the final application form (lotion, aerosol, etc) and product packing have been decided.
- Full Text:
- Date Issued: 2004
Investigating the use of social networking via mobile phone as an extension tool in small-scale (emerging) agriculture in selected farming communities in the Cacadu District
- Authors: Atinuke, Jimoh Rashidat
- Date: 2015
- Subjects: Farms, Small -- Technological innovations -- South Africa -- Eastern Cape Communication in economic development -- South Africa -- Eastern Cape , Information technology -- Social aspects -- South Africa -- Eastern Cape Digital media -- South Africa -- Eastern Cape Social media -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/18398 , vital:28633
- Description: We live in the era in which the internet is now available on the majority of mobile phones at a very cheaper rate. This advancement in technology has created a boom in the use of mobile phone social networking as a primary communication tool - not only for individuals but also commonly used by professionals in most fields. The trends and growing usage of social networking via mobile phone indicate a potentially effective new platform for increasing production especially in agricultural sectors. In this age of information technology, farming communities can be empowered with the latest information and knowledge through mobile phone social networking to enhance agricultural development. The study investigates the use of mobile phone social networking as an extension tool in small-scale (emerging) farmers in selected farming communities in the Cacadu District Municipality of the Eastern Cape of South Africa. Specifically, the study investigates the use of available mobile phone social networks; what they are used for; and the importance and benefits of social networking both generally and to the farming communities. The study further identifies problems inhibiting the use of mobile phone social networking. Other channels through which the small-scale (emerging) farmers acquire agricultural information, aside from via mobile phone, and the type of agricultural information these farmers acquire, are also investigated. This study focuses on the use - and not the testing or adoption of - mobile phone social networking in small-scale (emerging) agriculture. In the exercise to investigate the use of social networking apps via mobile phone, data was collected from 40 small-scale (emerging) farmers using a purposive sampling method. This study used a survey design, exploratory and descriptive research methodologies. Data was captured by administering a questionnaire through personal face-to-face interviews. Descriptive statistics such as simple frequency tables, percentages and bar graphs were used. From the Chi-square testing, it was found that agricultural knowledge levels, internet access and size of production farm land influence the use of social networking by the small-scale (emerging) farmers. However, the result of this study showed that gender, age, other income and educational level of the small-scale (emerging) farmers are not statistically significant determinants of social networking use. Cronbach’s alpha coefficient was found to be 0.95. To establish the strength of associations of the variables, Cramer’s V ranging between 0.04 and 0.9 (signifying relationships from negligible to very strong association) was used. The findings showed that different social networks are used by the farming communities, such as WhatsApp, Facebook, and Blackberry messenger, MXit, Twitter and YouTube. The various uses of these social networks by the farmers are discussed. The benefits and problems inhibiting their use are also outlined. Other sources of acquiring agricultural information by the farmers aside from social networking via mobile phone are examined. The result of the study shows that [agricultural extension officers, other farmers, farmers’ discussion groups, friends and family,] are major sources of agricultural information to the small-scale (emerging) farmers while other sources are television, radio, print media and result demonstrations. The study suggests that to enhance mobile phone social networking to ensure that timely and effective agricultural information is readily accessible to the small-scale (emerging) farmers. These include agricultural extension officers making optimal use of social networking via mobile phone, due to the strong interaction and trust between them and the farmers. This interaction can be instrumental in the effective use of this technology as a resourceful medium for accessing agricultural information to enhance productivity. Proper awareness and understanding of the potential and benefits of mobile social networking by the farmers will motivate the small-scale (emerging) farmers to use the technology for effective agricultural purposes. Also, ensuring the availability of agricultural information to small-scale (emerging) farmers by setting up on-line pages or websites to discuss matters of interest and educate and update farmers on agricultural issues should be encouraged. This may attract the younger generation and the youth to participate fully in agricultural activities - thereby enhancing agricultural development.
- Full Text:
- Date Issued: 2015
- Authors: Atinuke, Jimoh Rashidat
- Date: 2015
- Subjects: Farms, Small -- Technological innovations -- South Africa -- Eastern Cape Communication in economic development -- South Africa -- Eastern Cape , Information technology -- Social aspects -- South Africa -- Eastern Cape Digital media -- South Africa -- Eastern Cape Social media -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/18398 , vital:28633
- Description: We live in the era in which the internet is now available on the majority of mobile phones at a very cheaper rate. This advancement in technology has created a boom in the use of mobile phone social networking as a primary communication tool - not only for individuals but also commonly used by professionals in most fields. The trends and growing usage of social networking via mobile phone indicate a potentially effective new platform for increasing production especially in agricultural sectors. In this age of information technology, farming communities can be empowered with the latest information and knowledge through mobile phone social networking to enhance agricultural development. The study investigates the use of mobile phone social networking as an extension tool in small-scale (emerging) farmers in selected farming communities in the Cacadu District Municipality of the Eastern Cape of South Africa. Specifically, the study investigates the use of available mobile phone social networks; what they are used for; and the importance and benefits of social networking both generally and to the farming communities. The study further identifies problems inhibiting the use of mobile phone social networking. Other channels through which the small-scale (emerging) farmers acquire agricultural information, aside from via mobile phone, and the type of agricultural information these farmers acquire, are also investigated. This study focuses on the use - and not the testing or adoption of - mobile phone social networking in small-scale (emerging) agriculture. In the exercise to investigate the use of social networking apps via mobile phone, data was collected from 40 small-scale (emerging) farmers using a purposive sampling method. This study used a survey design, exploratory and descriptive research methodologies. Data was captured by administering a questionnaire through personal face-to-face interviews. Descriptive statistics such as simple frequency tables, percentages and bar graphs were used. From the Chi-square testing, it was found that agricultural knowledge levels, internet access and size of production farm land influence the use of social networking by the small-scale (emerging) farmers. However, the result of this study showed that gender, age, other income and educational level of the small-scale (emerging) farmers are not statistically significant determinants of social networking use. Cronbach’s alpha coefficient was found to be 0.95. To establish the strength of associations of the variables, Cramer’s V ranging between 0.04 and 0.9 (signifying relationships from negligible to very strong association) was used. The findings showed that different social networks are used by the farming communities, such as WhatsApp, Facebook, and Blackberry messenger, MXit, Twitter and YouTube. The various uses of these social networks by the farmers are discussed. The benefits and problems inhibiting their use are also outlined. Other sources of acquiring agricultural information by the farmers aside from social networking via mobile phone are examined. The result of the study shows that [agricultural extension officers, other farmers, farmers’ discussion groups, friends and family,] are major sources of agricultural information to the small-scale (emerging) farmers while other sources are television, radio, print media and result demonstrations. The study suggests that to enhance mobile phone social networking to ensure that timely and effective agricultural information is readily accessible to the small-scale (emerging) farmers. These include agricultural extension officers making optimal use of social networking via mobile phone, due to the strong interaction and trust between them and the farmers. This interaction can be instrumental in the effective use of this technology as a resourceful medium for accessing agricultural information to enhance productivity. Proper awareness and understanding of the potential and benefits of mobile social networking by the farmers will motivate the small-scale (emerging) farmers to use the technology for effective agricultural purposes. Also, ensuring the availability of agricultural information to small-scale (emerging) farmers by setting up on-line pages or websites to discuss matters of interest and educate and update farmers on agricultural issues should be encouraged. This may attract the younger generation and the youth to participate fully in agricultural activities - thereby enhancing agricultural development.
- Full Text:
- Date Issued: 2015
In vitro cytotoxic effects of selected Nigerian medicinal plant extracts on cancer cell lines
- Authors: Baatjies, Lucinda
- Date: 2012
- Subjects: Cancer -- Treatment , Cancer cells , Medicinal plants , Plant extracts , Traditional medicine , Public health
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10316 , http://hdl.handle.net/10948/d1008191 , Cancer -- Treatment , Cancer cells , Medicinal plants , Plant extracts , Traditional medicine , Public health
- Description: Cancer is a disease that imposes a heavy burden on public health and poses a challenge to science. The World Health Organization estimates that 80 percent of people in developing countries of the world rely on traditional medicine for their primary health needs, and about 85 percent of traditional medicine involves the use of plant extracts. This is particularly true in Africa where a large percentage of the population depends upon medicinal plants for health care. Therefore, detailed screening and evaluation of bioactive substances for chemotherapeutic purposes of African plants are urgently warranted. Furthermore, this will serve to validate the efficacy and safety of African traditional medicine. The current study investigated the in vitro cytotoxic effects of 17 ethanolic extracts of the following 16 plants used in traditional anticancer medicine in Nigeria: Sapium ellipticum leaves, Sapium ellipticum stembark, Combretum paniculatum, Celosia trigyna, Pupalia lappacea, Justica extensa, Hedranthera barteri leaves, Alternanthera sessilis, Ethulia conyzoides leaves, Lannea nigritana stembark, Combretum zenkeri root, Combretum molle leaves, Adenanthera parvoniana, Lannea acida, Cyathula achyranthoides, Drymaria cordata, Cyathula prostrata, against HeLa cancer cells. Five of the most promising extracts (Sapium ellipticum leaves, Combretum paniculatum, Celosia trigyna, Drymaria cordata, Cyathula prostrata) were selected for further screening against HT29 and MCF-7 cancer cells. Of the five, the first two were investigated further based on their activities in the screening phase. The S. ellipticum leaf extract yielded IC50 values of 88.60 ± 0.03 and 93.03 ± 0.03 μg/ml against HeLa and MCF-7, respectively. The toxicity was also evaluated on normal cells and an IC50 of 77.66 μg/ml was obtained for peripheral blood mononuclear cells (PBMCs). The IC50 values for proliferating and confluent Chang liver cells were both >125 μg/ml. These results suggest that the extract may be selective for specific cell types. Bio-assay guided fractionation of the S. ellipticum ethanolic extract yielded two active fractions; chloroform and ethyl acetate. Two compounds isolated from the chloroform extract were screened against the three cancer cell lines and found to be inactive. Three compounds were isolated from the ethyl acetate fraction and revealed IC50 values < 62.5 and < 31 μg/ml against MCF-7. Unfortunately these two compounds soon lost activity before any further work could be done on them and work was continued with the crude extract.
- Full Text:
- Date Issued: 2012
- Authors: Baatjies, Lucinda
- Date: 2012
- Subjects: Cancer -- Treatment , Cancer cells , Medicinal plants , Plant extracts , Traditional medicine , Public health
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10316 , http://hdl.handle.net/10948/d1008191 , Cancer -- Treatment , Cancer cells , Medicinal plants , Plant extracts , Traditional medicine , Public health
- Description: Cancer is a disease that imposes a heavy burden on public health and poses a challenge to science. The World Health Organization estimates that 80 percent of people in developing countries of the world rely on traditional medicine for their primary health needs, and about 85 percent of traditional medicine involves the use of plant extracts. This is particularly true in Africa where a large percentage of the population depends upon medicinal plants for health care. Therefore, detailed screening and evaluation of bioactive substances for chemotherapeutic purposes of African plants are urgently warranted. Furthermore, this will serve to validate the efficacy and safety of African traditional medicine. The current study investigated the in vitro cytotoxic effects of 17 ethanolic extracts of the following 16 plants used in traditional anticancer medicine in Nigeria: Sapium ellipticum leaves, Sapium ellipticum stembark, Combretum paniculatum, Celosia trigyna, Pupalia lappacea, Justica extensa, Hedranthera barteri leaves, Alternanthera sessilis, Ethulia conyzoides leaves, Lannea nigritana stembark, Combretum zenkeri root, Combretum molle leaves, Adenanthera parvoniana, Lannea acida, Cyathula achyranthoides, Drymaria cordata, Cyathula prostrata, against HeLa cancer cells. Five of the most promising extracts (Sapium ellipticum leaves, Combretum paniculatum, Celosia trigyna, Drymaria cordata, Cyathula prostrata) were selected for further screening against HT29 and MCF-7 cancer cells. Of the five, the first two were investigated further based on their activities in the screening phase. The S. ellipticum leaf extract yielded IC50 values of 88.60 ± 0.03 and 93.03 ± 0.03 μg/ml against HeLa and MCF-7, respectively. The toxicity was also evaluated on normal cells and an IC50 of 77.66 μg/ml was obtained for peripheral blood mononuclear cells (PBMCs). The IC50 values for proliferating and confluent Chang liver cells were both >125 μg/ml. These results suggest that the extract may be selective for specific cell types. Bio-assay guided fractionation of the S. ellipticum ethanolic extract yielded two active fractions; chloroform and ethyl acetate. Two compounds isolated from the chloroform extract were screened against the three cancer cell lines and found to be inactive. Three compounds were isolated from the ethyl acetate fraction and revealed IC50 values < 62.5 and < 31 μg/ml against MCF-7. Unfortunately these two compounds soon lost activity before any further work could be done on them and work was continued with the crude extract.
- Full Text:
- Date Issued: 2012
Oorsaaipraktyke en vestiging van eenjarige raaigras in lusernweiding
- Authors: Badenhorst, Daniël
- Date: 2011
- Subjects: Alfalfa Alfalfa -- Irrigation
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/11792 , vital:26969
- Description: Die Eden- en Overbergdistrik in die Suid-Kaap vorm die mees suidelike substreke van die winterreëngebied. Dit is geleë tussen 33° 45‟ en 34° 50‟ suiderbreedte en tussen 19° 0‟ en 23° 45‟ oosterlengte. Die westelike grens van die substreek word gevorm deur die Villiersdorp-Botrivier-gebied. Aan die noordekant word die substreek begrens deur die Sonderend-, Lange- en Outeniquabergreekse. Die oostelike grens word gevorm deur die Bloukransrivier. Die Indiese Oseaankuslyn vanaf Nature‟s Valley in die ooste tot by Kleinmond in die weste vorm die suidelike grens. In die Suidkusstreek word 54.5% van die Wes-Kaapse melkproduksie en 24% van Suid-Afrika se melkproduksie deur 1900 melkprodusente geproduseer (Dowrey 2005). Ses en dertig persent van die bruto jaarlikse veeproduk is afkomstig vanaf suiwelprodukte wat hoofsaaklik vanaf aangeplante weiding geproduseer word. Aangeplante weiding beslaan 37.7% van die totale oppervlakte van die vee- en saaigebiede van die Suidkusstreek (Botha 2003). Weens beperkte, skaars besproeiingswater in groot dele van die Suid-Kaap, word heelwat weiding slegs aanvullend besproei (Protopapas 2004). Voervloeiprogramme vir melkproduksie onder aanvullende besproeiing bestaan hoofsaaklik uit kikoejoe (Pennisetum clandestinum) en lusern (Medicago sativa) (Botha 2003). Die droëmateriaalproduksie en weikapasiteit van lusern volg, soos kikoejoe, „n baie sterk seisoenale tendens met „n piek in die somer / herfs en „n laagtepunt in die winter (Durand 1993; Botha 1998; Botha 2003). Voervloeiprogramme met lusern of kikoejoe as hoofkomponente het gewoonlik voertekorte gedurende die winter tot gevolg. Hoofsaaklik om dié rede het boere uit die lusernproduserende gebiede van Heidelberg, Riversdal, Herbertsdale en Mosselbaai, deur hul onderskeie boereverenigings, „n versoek aan Outeniqua Navorsingsplaas gerig om ondersoek in te stel na moontlike oorsaaipraktyke wat die droëmateriaalproduksie van lusernstelsels gedurende die winter kan verhoog. Kikoejoeweiding word reeds die afgelope aantal jare suksesvol met Westerworldsraaigrasse oorgesaai vir beter herfs-, winter- en lenteproduksie. Anders as by kikoejoeweidings bestaan daar huidiglik geen beproefde oorsaaipraktyke wat die produksiepotensiaal van lusern in die winter en vroeë lente kan verhoog nie (Anoniem 2002).
- Full Text:
- Date Issued: 2011
- Authors: Badenhorst, Daniël
- Date: 2011
- Subjects: Alfalfa Alfalfa -- Irrigation
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/11792 , vital:26969
- Description: Die Eden- en Overbergdistrik in die Suid-Kaap vorm die mees suidelike substreke van die winterreëngebied. Dit is geleë tussen 33° 45‟ en 34° 50‟ suiderbreedte en tussen 19° 0‟ en 23° 45‟ oosterlengte. Die westelike grens van die substreek word gevorm deur die Villiersdorp-Botrivier-gebied. Aan die noordekant word die substreek begrens deur die Sonderend-, Lange- en Outeniquabergreekse. Die oostelike grens word gevorm deur die Bloukransrivier. Die Indiese Oseaankuslyn vanaf Nature‟s Valley in die ooste tot by Kleinmond in die weste vorm die suidelike grens. In die Suidkusstreek word 54.5% van die Wes-Kaapse melkproduksie en 24% van Suid-Afrika se melkproduksie deur 1900 melkprodusente geproduseer (Dowrey 2005). Ses en dertig persent van die bruto jaarlikse veeproduk is afkomstig vanaf suiwelprodukte wat hoofsaaklik vanaf aangeplante weiding geproduseer word. Aangeplante weiding beslaan 37.7% van die totale oppervlakte van die vee- en saaigebiede van die Suidkusstreek (Botha 2003). Weens beperkte, skaars besproeiingswater in groot dele van die Suid-Kaap, word heelwat weiding slegs aanvullend besproei (Protopapas 2004). Voervloeiprogramme vir melkproduksie onder aanvullende besproeiing bestaan hoofsaaklik uit kikoejoe (Pennisetum clandestinum) en lusern (Medicago sativa) (Botha 2003). Die droëmateriaalproduksie en weikapasiteit van lusern volg, soos kikoejoe, „n baie sterk seisoenale tendens met „n piek in die somer / herfs en „n laagtepunt in die winter (Durand 1993; Botha 1998; Botha 2003). Voervloeiprogramme met lusern of kikoejoe as hoofkomponente het gewoonlik voertekorte gedurende die winter tot gevolg. Hoofsaaklik om dié rede het boere uit die lusernproduserende gebiede van Heidelberg, Riversdal, Herbertsdale en Mosselbaai, deur hul onderskeie boereverenigings, „n versoek aan Outeniqua Navorsingsplaas gerig om ondersoek in te stel na moontlike oorsaaipraktyke wat die droëmateriaalproduksie van lusernstelsels gedurende die winter kan verhoog. Kikoejoeweiding word reeds die afgelope aantal jare suksesvol met Westerworldsraaigrasse oorgesaai vir beter herfs-, winter- en lenteproduksie. Anders as by kikoejoeweidings bestaan daar huidiglik geen beproefde oorsaaipraktyke wat die produksiepotensiaal van lusern in die winter en vroeë lente kan verhoog nie (Anoniem 2002).
- Full Text:
- Date Issued: 2011
The use of thermal modelling in improving rural subsistence aquaculture
- Authors: Bailey, Dylan Francis
- Date: 2007
- Subjects: Sustainable aquaculture -- South Africa , Aquaculture industry -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10715 , http://hdl.handle.net/10948/473 , Sustainable aquaculture -- South Africa , Aquaculture industry -- South Africa
- Description: There has been a long history of attempts to promote subsistence rural aquaculture within South Africa. Many of these attempts have failed due to inadequate support from government and support agencies. There has been a recent revived interest in promoting rural aquaculture development. Presented in this project are six scenarios demonstrating the potential application of thermal modelling techniques to improving subsistence rural aquaculture. These scenarios were based on a model validated against a real life system, and run with environmental data for the year 2005. Bovine manure, grass thatch, cereal straw and Typha spp. water reeds were tested for thermal performance. These results were then applied to the scenarios. The open and kraal enclosed pond scenarios yielded the widest deviation in temperatures throughout the year, with an average temperature of 3.8oC and 6.0oC above ambient and a temperature range of 10.6oC and 12.4oC for the year respectively. Eliminating solar radiation and reducing wind speed resulted in an average difference of 1.5oC below ambient and a temperature range of 7.5oC for the year. When completely enclosed in a well-sealed traditional Xhosa style hut, the pond had an average difference of 5.6oC below outside ambient temperature, with a range of 7.8oC for the year. A passive solar heating scenario added to the sealed hut scenario, which when run continuously maintained an average difference of 34.7oC above outside ambient temperatures, with a range of 56oC for the year. When a hypothetical 25oC temperature control was included in the model, the system maintained an average of 7.1oC above ambient outside temperatures, with a temperature range of 0.8oC throughout the year. The wider range of temperatures made available through the use of thermal modelling approaches provides a more diverse range of species available for subsistence rural aquaculture at any site, significantly improving its potential.
- Full Text:
- Date Issued: 2007
- Authors: Bailey, Dylan Francis
- Date: 2007
- Subjects: Sustainable aquaculture -- South Africa , Aquaculture industry -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10715 , http://hdl.handle.net/10948/473 , Sustainable aquaculture -- South Africa , Aquaculture industry -- South Africa
- Description: There has been a long history of attempts to promote subsistence rural aquaculture within South Africa. Many of these attempts have failed due to inadequate support from government and support agencies. There has been a recent revived interest in promoting rural aquaculture development. Presented in this project are six scenarios demonstrating the potential application of thermal modelling techniques to improving subsistence rural aquaculture. These scenarios were based on a model validated against a real life system, and run with environmental data for the year 2005. Bovine manure, grass thatch, cereal straw and Typha spp. water reeds were tested for thermal performance. These results were then applied to the scenarios. The open and kraal enclosed pond scenarios yielded the widest deviation in temperatures throughout the year, with an average temperature of 3.8oC and 6.0oC above ambient and a temperature range of 10.6oC and 12.4oC for the year respectively. Eliminating solar radiation and reducing wind speed resulted in an average difference of 1.5oC below ambient and a temperature range of 7.5oC for the year. When completely enclosed in a well-sealed traditional Xhosa style hut, the pond had an average difference of 5.6oC below outside ambient temperature, with a range of 7.8oC for the year. A passive solar heating scenario added to the sealed hut scenario, which when run continuously maintained an average difference of 34.7oC above outside ambient temperatures, with a range of 56oC for the year. When a hypothetical 25oC temperature control was included in the model, the system maintained an average of 7.1oC above ambient outside temperatures, with a temperature range of 0.8oC throughout the year. The wider range of temperatures made available through the use of thermal modelling approaches provides a more diverse range of species available for subsistence rural aquaculture at any site, significantly improving its potential.
- Full Text:
- Date Issued: 2007
Characterisation of InAs-based epilayers by FTIR spectroscopy
- Authors: Baisitse, Tshepiso Revonia
- Date: 2007
- Subjects: Fourier transform infrared spectroscopy , Gallium arsenide semiconductors
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10534 , http://hdl.handle.net/10948/474 , Fourier transform infrared spectroscopy , Gallium arsenide semiconductors
- Description: This study focuses on the characterization of InAs and InAs1-xSbx epitaxial layers by infrared reflectance and transmittance spectroscopy and Hall measurements. Reflectance measurements were performed in order to obtain the dielectric parameters and to extract from these information about the electrical properties (mobility and carrier concentration) of this important III-V material system. The transmittance measurements were used to determine the bandgap of InAsSb. Infrared reflectivity and transmittance measurements were performed in the wavelength range 200 – 2000 cm-1 on InAs and InAsSb layers grown on three types of substrates. A classical two oscillator model that takes into account both the free carriers and the lattice, was used to analyse the reflectance data using the BMDP® computer curve fitting software. The dielectric parameters and the electrical properties (carrier concentration and mobility) were extracted from the simulations. Due to the low free carrier concentration in the epitaxial structures, the plasma resonance frequency (ωp) values obtained from the simulations of reflectance spectra measured above 200 cm-1, were in the order of 20-30 cm-1. These low values were confirmed by direct measurements of ωp in reflectance spectra obtained in the range 15-200 cm-1. The simulated carrier concentration and mobility values determined optically were compared to the values determined by Hall measurements at room temperature and previously reported values by other researchers. The simulated values obtained were in reasonable agreement with the Hall values. The simulated and measured carrier concentrations obtained for InAs layers were significantly higher than the intrinsic carrier concentration for InAs at room temperature, indicating notable concentrations of donors resulting from the growth process.
- Full Text:
- Date Issued: 2007
- Authors: Baisitse, Tshepiso Revonia
- Date: 2007
- Subjects: Fourier transform infrared spectroscopy , Gallium arsenide semiconductors
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10534 , http://hdl.handle.net/10948/474 , Fourier transform infrared spectroscopy , Gallium arsenide semiconductors
- Description: This study focuses on the characterization of InAs and InAs1-xSbx epitaxial layers by infrared reflectance and transmittance spectroscopy and Hall measurements. Reflectance measurements were performed in order to obtain the dielectric parameters and to extract from these information about the electrical properties (mobility and carrier concentration) of this important III-V material system. The transmittance measurements were used to determine the bandgap of InAsSb. Infrared reflectivity and transmittance measurements were performed in the wavelength range 200 – 2000 cm-1 on InAs and InAsSb layers grown on three types of substrates. A classical two oscillator model that takes into account both the free carriers and the lattice, was used to analyse the reflectance data using the BMDP® computer curve fitting software. The dielectric parameters and the electrical properties (carrier concentration and mobility) were extracted from the simulations. Due to the low free carrier concentration in the epitaxial structures, the plasma resonance frequency (ωp) values obtained from the simulations of reflectance spectra measured above 200 cm-1, were in the order of 20-30 cm-1. These low values were confirmed by direct measurements of ωp in reflectance spectra obtained in the range 15-200 cm-1. The simulated carrier concentration and mobility values determined optically were compared to the values determined by Hall measurements at room temperature and previously reported values by other researchers. The simulated values obtained were in reasonable agreement with the Hall values. The simulated and measured carrier concentrations obtained for InAs layers were significantly higher than the intrinsic carrier concentration for InAs at room temperature, indicating notable concentrations of donors resulting from the growth process.
- Full Text:
- Date Issued: 2007