A best practice e-learning environment for software training
- Authors: Esterhuyse, Maxine Pier
- Date: 2017
- Subjects: Internet in education Computer-assisted instruction Web-based instruction -- Education
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/12165 , vital:27039
- Description: The incorporation of best practice in e-learning environments can increase the probability of success for companies and learners alike. By identifying and understanding the barriers that potential learners may face when interacting with e-learning products, the potential for e-learning failure may be alleviated. There are a variety of benefits that may be realised by companies incorporating e-learning opportunities into their management strategies. However, certain pedagogical principles, metrics and components need to be investigated and implemented in order for a corporate e-learning environment to be successful. The aim of this research is to prototype and evaluate a practical e-learning environment for software training (eLESTP) with e-learning components consisting of interactive learning objects that can guide the development and management of online training in the corporate context. The eLESTP is based on a theoretical contribution that is conceptualised in the form of an e-learning environment for software training (eLESTT). Hence, this study followed a research methodology that is appropriate for educational technologies, namely the Design-Based Research (DBR) methodology, which was applied in iterative cycles. Quantitative and qualitative data was collected by means of a case study, interviews, a focus group and survey. The proposed eLESTP underwent several iterations of feedback and improvement and the result is a real-world solution to the problem at hand. With the purpose of determining the success of corporate e-learning, the barriers and critical success factors for e-learning as well as evaluation criteria were explored. Interviews, a focus group and a survey were conducted in order to validate the investigated literature in a real-world context. Informal interviews enabled a better understanding of the organisational context of this study. The focus group was conducted with customers who were undergoing face-to-face training using conveyancing software developed by Korbitec. Many of the issues faced by learners identified in literature regarding e-learning in developing countries were identified by the participants from the case study. An e-learning survey was used to gather information regarding the intention of Korbitec’s customers to use e-learning as well as their satisfaction with using e-learning. From the survey, it was found that respondents were positive regarding intention to use and satisfaction toward e-learning usage. DBR Cycle 1: Problem Investigation and Proposal entailed the initial problem investigation by conducting a literature review, focus group and survey. DBR Cycle 2: Design Alternative 1 of this study involved a design alternative for eLESTP, namely Prototype 1. DBR Cycle 3: Design and Evaluate Alternative 2 involved the design and prototyping of Prototype 2 for eLESTP as well as the improvement of Prototype 2 through sub-cycles of testing and refinement. The suggestions for improvement were obtained from the relevant stakeholders at Korbitec who are content developers and subject-matter experts. The criteria used to evaluate the success of eLESTP, including its e-learning components, were synthesised and adapted from literature and a new set of evaluation criteria for e-learning environments in software training contexts was proposed. The evaluated eLESTP consists of the technology basis of the Modular Object Oriented Dynamic Learning Environment (Moodle), design guidelines for e-learning components, certification and competency-based training, pedagogical principles and best practice. Overall, eLESTP was positively received by various evaluator groups in formative and summative evaluations. The research results indicate that the use of an e-learning environment for software training purposes was useful and necessary. In support of this Masters dissertation, the following three conference papers have been published and presented at one local conference and two international conferences. In addition, an article has been published in an accredited journal: 1. IDIA 2015, Conference Paper – Zanzibar (Tanzania); 2. Conf-IRM 2016, Conference Paper – Cape Town (South Africa); 3. MCIS 2016, Conference Paper – Cyprus (Europe); and 4. IJIKM 2016, Journal Article.
- Full Text:
- Date Issued: 2017
- Authors: Esterhuyse, Maxine Pier
- Date: 2017
- Subjects: Internet in education Computer-assisted instruction Web-based instruction -- Education
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/12165 , vital:27039
- Description: The incorporation of best practice in e-learning environments can increase the probability of success for companies and learners alike. By identifying and understanding the barriers that potential learners may face when interacting with e-learning products, the potential for e-learning failure may be alleviated. There are a variety of benefits that may be realised by companies incorporating e-learning opportunities into their management strategies. However, certain pedagogical principles, metrics and components need to be investigated and implemented in order for a corporate e-learning environment to be successful. The aim of this research is to prototype and evaluate a practical e-learning environment for software training (eLESTP) with e-learning components consisting of interactive learning objects that can guide the development and management of online training in the corporate context. The eLESTP is based on a theoretical contribution that is conceptualised in the form of an e-learning environment for software training (eLESTT). Hence, this study followed a research methodology that is appropriate for educational technologies, namely the Design-Based Research (DBR) methodology, which was applied in iterative cycles. Quantitative and qualitative data was collected by means of a case study, interviews, a focus group and survey. The proposed eLESTP underwent several iterations of feedback and improvement and the result is a real-world solution to the problem at hand. With the purpose of determining the success of corporate e-learning, the barriers and critical success factors for e-learning as well as evaluation criteria were explored. Interviews, a focus group and a survey were conducted in order to validate the investigated literature in a real-world context. Informal interviews enabled a better understanding of the organisational context of this study. The focus group was conducted with customers who were undergoing face-to-face training using conveyancing software developed by Korbitec. Many of the issues faced by learners identified in literature regarding e-learning in developing countries were identified by the participants from the case study. An e-learning survey was used to gather information regarding the intention of Korbitec’s customers to use e-learning as well as their satisfaction with using e-learning. From the survey, it was found that respondents were positive regarding intention to use and satisfaction toward e-learning usage. DBR Cycle 1: Problem Investigation and Proposal entailed the initial problem investigation by conducting a literature review, focus group and survey. DBR Cycle 2: Design Alternative 1 of this study involved a design alternative for eLESTP, namely Prototype 1. DBR Cycle 3: Design and Evaluate Alternative 2 involved the design and prototyping of Prototype 2 for eLESTP as well as the improvement of Prototype 2 through sub-cycles of testing and refinement. The suggestions for improvement were obtained from the relevant stakeholders at Korbitec who are content developers and subject-matter experts. The criteria used to evaluate the success of eLESTP, including its e-learning components, were synthesised and adapted from literature and a new set of evaluation criteria for e-learning environments in software training contexts was proposed. The evaluated eLESTP consists of the technology basis of the Modular Object Oriented Dynamic Learning Environment (Moodle), design guidelines for e-learning components, certification and competency-based training, pedagogical principles and best practice. Overall, eLESTP was positively received by various evaluator groups in formative and summative evaluations. The research results indicate that the use of an e-learning environment for software training purposes was useful and necessary. In support of this Masters dissertation, the following three conference papers have been published and presented at one local conference and two international conferences. In addition, an article has been published in an accredited journal: 1. IDIA 2015, Conference Paper – Zanzibar (Tanzania); 2. Conf-IRM 2016, Conference Paper – Cape Town (South Africa); 3. MCIS 2016, Conference Paper – Cyprus (Europe); and 4. IJIKM 2016, Journal Article.
- Full Text:
- Date Issued: 2017
A biochemical study of the antidiabetic and anticogulant effects of Tulbaghia Violacea
- Authors: Davison, Candice
- Date: 2010
- Subjects: Medicinal plants -- South Africa , Diabetes -- Alternative treatment -- South Africa , Violaceae -- Therapeutic use -- South Africa , Anticoagulants (Medicine) , Plants -- Analysis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10311 , http://hdl.handle.net/10948/1523 , Medicinal plants -- South Africa , Diabetes -- Alternative treatment -- South Africa , Violaceae -- Therapeutic use -- South Africa , Anticoagulants (Medicine) , Plants -- Analysis
- Description: Secondary metabolites derived from plants, especially those used by traditional healers, are at the forefront of new drug development in combating diseases such as cancer and diabetes. Garlic is employed in indigenous medicine all over the world for the treatment of a variety of diseases. Dietary garlic has been recognized for its beneficial health effects. In particular, garlic consumption has been correlated with (i) reduction of risk factors for cardiovascular diseases and cancer, (ii) stimulation of immune function, (iii) enhanced detoxification of foreign compounds, (iv) hepatoprotection, (v) antimicrobial effects, (vi) antioxidant effects, and most importantly (vii) its hypoglycemic and anticoagulant properties. Due to these beneficial properties, garlic and its closely related genera which includes Tulbaghia violacea, may be useful as coadjuvant therapy in the treatment of type 2 diabetes and some of its physiological complications. The aim of this study was to determine if T. violacea has antidiabetic and anticoagulant properties. This was performed in vitro using both aqueous and organic extracts of the roots, leaves and bulbs. An organic extract was able to improve glucose-stimulated insulin secretion (GSIS) in INS-1 pancreatic β-cells and glucose uptake in Chang liver cells. The BO extract had no effect on the glucose uptake in 3T3-L1 an adipose cell line and reduced glucose utilisation in C2C12, a skeletal muscle cell line. Some of the properties displayed by T. violacea in this study are consistent with those found in similar studies with garlic extracts. It was observed that the BO extract increased the membrane potential and Glut-2 expression in INS-1 cells cultured at hyperglycemic levels, however, at normoglycemic levels a reduction was observed. The oxygen consumption increased at both glycemic levels due to treatment with the BO extract. Platelets were exposed to the extracts to determine their effects upon platelet aggregation, adhesion and protein secretion. Since the BO extract displayed the highest potential at inhibiting platelet aggregation and adhesion. A rat model was used in ex vivo studies to determine if the extract exhibited the same effect in a physiological model. It was noted that the BO extract exhibited a higher degree of inhibition on platelet aggregation and adhesion than the positive control, aspirin. The BO extract reduced clotting times in the prothrombin time (PT) test, but prolonged the clotting time in the actived partial thromboplastin time (APTT) assay in the ex vivo model; however, it had no affect on these clotting assays in the in vitro model using human blood. The BO extract increased the D-dimer and Fibrinogen-C levels in the in vitro model, but had no effect on the D-dimer concentrations and lowered the Fibrinogen-C levels in the ex vivo model. The active compounds in the extract remain to be elucidated.
- Full Text:
- Date Issued: 2010
- Authors: Davison, Candice
- Date: 2010
- Subjects: Medicinal plants -- South Africa , Diabetes -- Alternative treatment -- South Africa , Violaceae -- Therapeutic use -- South Africa , Anticoagulants (Medicine) , Plants -- Analysis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10311 , http://hdl.handle.net/10948/1523 , Medicinal plants -- South Africa , Diabetes -- Alternative treatment -- South Africa , Violaceae -- Therapeutic use -- South Africa , Anticoagulants (Medicine) , Plants -- Analysis
- Description: Secondary metabolites derived from plants, especially those used by traditional healers, are at the forefront of new drug development in combating diseases such as cancer and diabetes. Garlic is employed in indigenous medicine all over the world for the treatment of a variety of diseases. Dietary garlic has been recognized for its beneficial health effects. In particular, garlic consumption has been correlated with (i) reduction of risk factors for cardiovascular diseases and cancer, (ii) stimulation of immune function, (iii) enhanced detoxification of foreign compounds, (iv) hepatoprotection, (v) antimicrobial effects, (vi) antioxidant effects, and most importantly (vii) its hypoglycemic and anticoagulant properties. Due to these beneficial properties, garlic and its closely related genera which includes Tulbaghia violacea, may be useful as coadjuvant therapy in the treatment of type 2 diabetes and some of its physiological complications. The aim of this study was to determine if T. violacea has antidiabetic and anticoagulant properties. This was performed in vitro using both aqueous and organic extracts of the roots, leaves and bulbs. An organic extract was able to improve glucose-stimulated insulin secretion (GSIS) in INS-1 pancreatic β-cells and glucose uptake in Chang liver cells. The BO extract had no effect on the glucose uptake in 3T3-L1 an adipose cell line and reduced glucose utilisation in C2C12, a skeletal muscle cell line. Some of the properties displayed by T. violacea in this study are consistent with those found in similar studies with garlic extracts. It was observed that the BO extract increased the membrane potential and Glut-2 expression in INS-1 cells cultured at hyperglycemic levels, however, at normoglycemic levels a reduction was observed. The oxygen consumption increased at both glycemic levels due to treatment with the BO extract. Platelets were exposed to the extracts to determine their effects upon platelet aggregation, adhesion and protein secretion. Since the BO extract displayed the highest potential at inhibiting platelet aggregation and adhesion. A rat model was used in ex vivo studies to determine if the extract exhibited the same effect in a physiological model. It was noted that the BO extract exhibited a higher degree of inhibition on platelet aggregation and adhesion than the positive control, aspirin. The BO extract reduced clotting times in the prothrombin time (PT) test, but prolonged the clotting time in the actived partial thromboplastin time (APTT) assay in the ex vivo model; however, it had no affect on these clotting assays in the in vitro model using human blood. The BO extract increased the D-dimer and Fibrinogen-C levels in the in vitro model, but had no effect on the D-dimer concentrations and lowered the Fibrinogen-C levels in the ex vivo model. The active compounds in the extract remain to be elucidated.
- Full Text:
- Date Issued: 2010
A blended learning toolkit that accommodates multiple learning styles
- Authors: Mills, Steven Christopher
- Date: 2019
- Subjects: Blended learning , Learning strategies Learning
- Language: English
- Type: Thesis , Masters , MCom
- Identifier: http://hdl.handle.net/10948/30452 , vital:30945
- Description: The purpose of this study was to identify how blended learning can be designed and incorporated to accommodate multiple learning styles within modules in the Department of Computing Sciences. A design theory was created through an analysis of literature and exploration into the backgrounds of students and lecturers within the Department of Computing Sciences. The design theory is: Blended learning can be a useful approach to accommodate multiple learning styles. Guidelines, and by extension a toolkit, facilitate the development of blended learning and provide effective tools to enable lecturers to successfully incorporate blended learning into their modules. Design-Based Research (DBR) was followed in this study, using a mixed-methods and iterative approach to determine the accuracy of the design theory. For the first iteration, the toolkit was implemented in two modules within the Department of Computing Sciences and for the second iteration, four modules. DBR produces a theoretical contribution and a practical artefact. The most important theoretical contributions are the design theory and guidelines for incorporating blended learning that accommodates multiple learning styles. The practical artefacts are the toolkit and tools therein. The toolkit, which was accessed via a website, guides lecturers through the process of incorporating blended learning that accommodates multiple learning styles and provides them with the necessary tools to do so. The design theory was proven in the evaluation that used a questionnaire to understand the lecturers’ experiences regarding the toolkit and the design theory. Therefore, the guidelines for applying blended learning is a useful approach to address multiple learning styles.
- Full Text:
- Date Issued: 2019
- Authors: Mills, Steven Christopher
- Date: 2019
- Subjects: Blended learning , Learning strategies Learning
- Language: English
- Type: Thesis , Masters , MCom
- Identifier: http://hdl.handle.net/10948/30452 , vital:30945
- Description: The purpose of this study was to identify how blended learning can be designed and incorporated to accommodate multiple learning styles within modules in the Department of Computing Sciences. A design theory was created through an analysis of literature and exploration into the backgrounds of students and lecturers within the Department of Computing Sciences. The design theory is: Blended learning can be a useful approach to accommodate multiple learning styles. Guidelines, and by extension a toolkit, facilitate the development of blended learning and provide effective tools to enable lecturers to successfully incorporate blended learning into their modules. Design-Based Research (DBR) was followed in this study, using a mixed-methods and iterative approach to determine the accuracy of the design theory. For the first iteration, the toolkit was implemented in two modules within the Department of Computing Sciences and for the second iteration, four modules. DBR produces a theoretical contribution and a practical artefact. The most important theoretical contributions are the design theory and guidelines for incorporating blended learning that accommodates multiple learning styles. The practical artefacts are the toolkit and tools therein. The toolkit, which was accessed via a website, guides lecturers through the process of incorporating blended learning that accommodates multiple learning styles and provides them with the necessary tools to do so. The design theory was proven in the evaluation that used a questionnaire to understand the lecturers’ experiences regarding the toolkit and the design theory. Therefore, the guidelines for applying blended learning is a useful approach to address multiple learning styles.
- Full Text:
- Date Issued: 2019
A business intelligence framework for supporting strategic sustainability information management in higher education
- Authors: Haupt, Ross
- Date: 2016
- Subjects: Business intelligence , Strategic planning -- Management
- Language: English
- Type: Thesis , Masters , MCom
- Identifier: http://hdl.handle.net/10948/5319 , vital:20832
- Description: In the higher education sector, a number of Higher Education Institutions (HEIs) are playing a leading role in promoting sustainable initiatives. Effectively managing these initiatives however can be a complex task and requires data and information from multiple aspects of operations. In an HEI, operating sustainably means ensuring financial sustainability, social sustainability, environmental sustainability and educational sustainability. In order to manage sustainability effectively, HEIs require an integrated tool that can provide information on all areas of sustainability. HEIs face a number of challenges in effectively managing sustainability information, such as siloed data and information, and poor sharing and communication of information. Business Intelligence (BI) can assist in overcoming many of the challenges faced by organisations in effectively managing strategic sustainability information. This study investigates both the constraints to effective sustainability information management and the challenges of BI. A BI framework to support effective strategic sustainability information management is proposed. Nelson Mandela Metropolitan University (NMMU) is one such HEI, which is affected by the challenges of managing strategic sustainability information. NMMU is therefore used as a case study in this research. A BI solution, Sustainable BI, was developed based on the proposed framework. The main goal of sustainable BI is to provide strategic management at NMMU with a tool that can provide integrated sustainability information that can assist in overcoming the challenges in effectively managing strategic sustainability information. Sustainable BI was evaluated by strategic management at NMMU who are responsible for managing sustainability at NMMU. The evaluation took place through a usability study. The study revealed to what extent Sustainable BI could effectively manage strategic sustainability information at NMMU. The BI framework was iteratively improved on based on the results of the evaluations. The contributions from this study are a model for sustainability management, a BI Framework to support strategic sustainability information management and a BI solution, Sustainable BI.
- Full Text:
- Date Issued: 2016
- Authors: Haupt, Ross
- Date: 2016
- Subjects: Business intelligence , Strategic planning -- Management
- Language: English
- Type: Thesis , Masters , MCom
- Identifier: http://hdl.handle.net/10948/5319 , vital:20832
- Description: In the higher education sector, a number of Higher Education Institutions (HEIs) are playing a leading role in promoting sustainable initiatives. Effectively managing these initiatives however can be a complex task and requires data and information from multiple aspects of operations. In an HEI, operating sustainably means ensuring financial sustainability, social sustainability, environmental sustainability and educational sustainability. In order to manage sustainability effectively, HEIs require an integrated tool that can provide information on all areas of sustainability. HEIs face a number of challenges in effectively managing sustainability information, such as siloed data and information, and poor sharing and communication of information. Business Intelligence (BI) can assist in overcoming many of the challenges faced by organisations in effectively managing strategic sustainability information. This study investigates both the constraints to effective sustainability information management and the challenges of BI. A BI framework to support effective strategic sustainability information management is proposed. Nelson Mandela Metropolitan University (NMMU) is one such HEI, which is affected by the challenges of managing strategic sustainability information. NMMU is therefore used as a case study in this research. A BI solution, Sustainable BI, was developed based on the proposed framework. The main goal of sustainable BI is to provide strategic management at NMMU with a tool that can provide integrated sustainability information that can assist in overcoming the challenges in effectively managing strategic sustainability information. Sustainable BI was evaluated by strategic management at NMMU who are responsible for managing sustainability at NMMU. The evaluation took place through a usability study. The study revealed to what extent Sustainable BI could effectively manage strategic sustainability information at NMMU. The BI framework was iteratively improved on based on the results of the evaluations. The contributions from this study are a model for sustainability management, a BI Framework to support strategic sustainability information management and a BI solution, Sustainable BI.
- Full Text:
- Date Issued: 2016
A case study : exploring a DVD driven approach for teaching and learning mathematics, at secondary school level, with a framework of blended learning
- Authors: Padayachee, Pragashni
- Date: 2010
- Subjects: Matehmatics -- Study and Teaching (Secondary) -- Audio-visual aids , Matehmatics -- Study and Teaching (Secondary) -- South Africa -- Port Elizabeth
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:10504 , http://hdl.handle.net/10948/1384 , Matehmatics -- Study and Teaching (Secondary) -- Audio-visual aids , Matehmatics -- Study and Teaching (Secondary) -- South Africa -- Port Elizabeth
- Description: Post-apartheid South Africa is witnessing an education crisis of significant proportions. The new outcomes-based education system has failed to deliver and universities are suffering the consequences of under-preparation of learners for tertiary studies especially in mathematics. The educator corps is lacking and it has become common practice for universities to deploy augmented programmes in mathematics for secondary school learners in the surrounding areas. This thesis describes a particular approach of blended learning, devised for the Incubator School Project (ISP), an initiative of the Nelson Mandela Metropolitan University (NMMU) in the Eastern Cape of South Africa. The defining feature of this blended approach is that it incorporates DVD technology, which offers an affordable and accessible option for the particular group of learners and the schools they attend. The thesis poses the research question: How did the use of the DVD approach within a blended learning environment support the learning of mathematics? This case study explores the particular blended approach and reports six fold on the approach – qualitatively based firstly on a questionnaire completed by learners and secondly on interviews of learners, thirdly on the facilitators reports, fourthly quantitatively on learner performance before and after the intervention. Fifthly six schools are used as a case study where the mathematics performance of the learners who participated in the ISP is compared to those who did not participate in the ISP. Finally the scope of blending of this model is evaluated by means of a radar chart, adapted from an existing radar measure. This research revealed that using the DVD approach within a blended learning environment did lead to an improvement in learners perceptions about mathematics, an improvement in the manner in which they learned mathematics, an extension in their mathematics knowledge and provided learners with a supportive environment in which to learn mathematics. The elements which supported learning in this approach are presented. The findings of the study suggest that this approach impacted favourably on the mathematics learning and enhanced the mathematics learning and performance of these learners. Recommendations are offered for practice, teachers and schools and for further research possibilities.
- Full Text:
- Date Issued: 2010
- Authors: Padayachee, Pragashni
- Date: 2010
- Subjects: Matehmatics -- Study and Teaching (Secondary) -- Audio-visual aids , Matehmatics -- Study and Teaching (Secondary) -- South Africa -- Port Elizabeth
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:10504 , http://hdl.handle.net/10948/1384 , Matehmatics -- Study and Teaching (Secondary) -- Audio-visual aids , Matehmatics -- Study and Teaching (Secondary) -- South Africa -- Port Elizabeth
- Description: Post-apartheid South Africa is witnessing an education crisis of significant proportions. The new outcomes-based education system has failed to deliver and universities are suffering the consequences of under-preparation of learners for tertiary studies especially in mathematics. The educator corps is lacking and it has become common practice for universities to deploy augmented programmes in mathematics for secondary school learners in the surrounding areas. This thesis describes a particular approach of blended learning, devised for the Incubator School Project (ISP), an initiative of the Nelson Mandela Metropolitan University (NMMU) in the Eastern Cape of South Africa. The defining feature of this blended approach is that it incorporates DVD technology, which offers an affordable and accessible option for the particular group of learners and the schools they attend. The thesis poses the research question: How did the use of the DVD approach within a blended learning environment support the learning of mathematics? This case study explores the particular blended approach and reports six fold on the approach – qualitatively based firstly on a questionnaire completed by learners and secondly on interviews of learners, thirdly on the facilitators reports, fourthly quantitatively on learner performance before and after the intervention. Fifthly six schools are used as a case study where the mathematics performance of the learners who participated in the ISP is compared to those who did not participate in the ISP. Finally the scope of blending of this model is evaluated by means of a radar chart, adapted from an existing radar measure. This research revealed that using the DVD approach within a blended learning environment did lead to an improvement in learners perceptions about mathematics, an improvement in the manner in which they learned mathematics, an extension in their mathematics knowledge and provided learners with a supportive environment in which to learn mathematics. The elements which supported learning in this approach are presented. The findings of the study suggest that this approach impacted favourably on the mathematics learning and enhanced the mathematics learning and performance of these learners. Recommendations are offered for practice, teachers and schools and for further research possibilities.
- Full Text:
- Date Issued: 2010
A characterization of landslide occurrence in the Kigezi Highlands of South Western Uganda
- Authors: Nseka, Denis
- Date: 2018
- Subjects: Landslides -- Uganda , Land degradation -- Uganda Earth movements
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/33791 , vital:33029
- Description: The frequency and magnitude of landslide occurrence in the Kigezi highlands of South Western Uganda has increased, but the key underpinnings of the occurrences are yet to be understood. The overall aim of this study was to characterize the parameters underpinning landslide occurrence in the Kigezi highlands. This information is important for predicting or identifying actual and potential landslide sites. This should inform policy, particularly in terms of developing early warning systems to landslide hazards in these highlands. The present study analysed the area’s topography, soil properties as well as land use and cover changes underpinning the spatialtemporal distribution of landslide occurrence in the region. The present study focussed on selected topographic parameters including slope gradient, profile curvature, Topographic Wetness Index (TWI), Stream Power Index (SPI), and Topographic Position Index (TPI). These factors were parameterized in the field and GIS environment using a 10 m Digital Elevation Model. Sixty five landslide features were surveyed and mapped. Soil properties were characterised in relation to slope position. Onsite soil property analysis was conducted within the landslide scars, auger holes and full profile representative sites. Furthermore, soil infiltration and strength tests, as well as clay mineralogy analyses were also conducted. An analysis of the spatial-temporal land use and cover changes was undertaken using satellite imagery spanning the period between 1985 and 2015. Landslides were noted to concentrate along topographic hollows in the landscape. The occurrence is dominant where slope gradient is between 25˚ and 35˚, profile curvature between 0.1 and 5, TWI between 8 and 18, SPI >10 and TPI between -1 and 1. Landslides are less pronounced on slope zones where slope gradient is <15˚ and >45˚, profile curvature <0, TWI <8 and >18, SPI <10 and TPI >1. Deep soil profiles ranging between 2.5 and 7 meters are a major characteristic of the study area. Soils are characterized by clay pans at a depth ranging between 0.75 and 3 meters within the profiles. The study area is dominated by clay texture, except for the uppermost surface horizons, which are loamy sand. All surface horizons analysed had the percentage of sand, silt and clay ranging from 33 to 55%, 22 to 40% and 10 to 30% respectively. In the deeper horizons, sand was observed to reduce drastically to less than 23%, while clay increased to greater than 50%. The clay content is very high in the deeper horizons exceeding 35%. By implication, such soils with a very high clay content and plasticity index are considered as Vertisols, with a profound influence in the occurrence of landslides. The top soil predominantly contains more quartz, while subsurface horizons have considerable amounts of illite/muscovite as the dominant clay minerals, ranging from 43% to 47 %. The liquid limit, plasticity index, computed weighted plasticity index (PIw), expansiveness (ɛex) and dispersion ranging from 50, 22, 17, 10 and 23 to 66, 44,34,54 and 64, respectively also have strong implications for landslide occurrence. Landslides are not normally experienced during or immediately after extreme rainfall events but occur later in the rainfall season. By implication, this time lag in landslide occurrence and rainfall distribution, is due to the initial infiltration through quartz dominated upper soil layers, before illite/muscovite clays in the lower soil horizons get saturated. Whereas forest cover reduced from 40 % in 1985 to 8% in 2015, cultivated land and settlements increased from 16% and 11% to 52% and 25% respectively during the same period. The distribution of cultivated land decreased in lower slope sections within gradient group < 15˚ by 59%. It however increased in upper sections within gradient cluster 25˚ to 35˚ by over 85% during the study period. There is a shift of cultivated land to the steeper sensitive upper slope elements associated with landslides in the study area. More than 50% of the landslides are occurring on cultivated land, 20% on settlements while less than 15 % and 10% are occurring on grassland and forests with degraded areas respectively. Landslides in Kigezi highlands are triggered by a complex interaction of multiple- factors, including dynamic triggers and ground condition variables. Topographic hollows are convergence zones within the landscape where all the parameters interact to cause landslides. Topographic hollows are therefore potential and actual landslide sites in the study area. Characterized by deep soil horizons with high clay content dominated by illite/muscovite minerals in the sub soils and profile concave forms with moderately steep slopes, topographic hollows are the most vulnerable slope elements to landslide occurrence. The spatial temporal patterns of landslide occurrence in the study area has changed due to increased cultivation of steep middle and upper slopes. Characterized by deep soil horizons with high clay content dominated by illite/muscovite minerals in the sub soils and profile concave forms with moderately steep slopes, topographic hollows are the most vulnerable slope elements to landslide occurrence. The spatial-temporal patterns of landslide occurrence in the study area has changed due to increased cultivation of steep middle and upper slopes. A close spatial and temporal correlation between land use/cover changes and landslide occurrence is discernible. The understanding of these topographical, pedological and land use/cover parameters and their influence on landslide occurrence is important in land management. It is now possible to identify and predict actual and potential landslide zones, and also demarcate safer zones for community activities. The information generated about the area’s topographic, pedological and land cover characteristics should help in vulnerability mitigation and enhance community resilience to landslide hazards in this fragile highland ecosystem. This can be done through designating zones for community activities while avoiding potential landslide zones. It is also recommended that, tree cover restoration be done in the highlands and the farmers encouraged to re-establish terrace farming while avoiding cultivation of sensitive steep middle and upper slope sections.
- Full Text:
- Date Issued: 2018
- Authors: Nseka, Denis
- Date: 2018
- Subjects: Landslides -- Uganda , Land degradation -- Uganda Earth movements
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/33791 , vital:33029
- Description: The frequency and magnitude of landslide occurrence in the Kigezi highlands of South Western Uganda has increased, but the key underpinnings of the occurrences are yet to be understood. The overall aim of this study was to characterize the parameters underpinning landslide occurrence in the Kigezi highlands. This information is important for predicting or identifying actual and potential landslide sites. This should inform policy, particularly in terms of developing early warning systems to landslide hazards in these highlands. The present study analysed the area’s topography, soil properties as well as land use and cover changes underpinning the spatialtemporal distribution of landslide occurrence in the region. The present study focussed on selected topographic parameters including slope gradient, profile curvature, Topographic Wetness Index (TWI), Stream Power Index (SPI), and Topographic Position Index (TPI). These factors were parameterized in the field and GIS environment using a 10 m Digital Elevation Model. Sixty five landslide features were surveyed and mapped. Soil properties were characterised in relation to slope position. Onsite soil property analysis was conducted within the landslide scars, auger holes and full profile representative sites. Furthermore, soil infiltration and strength tests, as well as clay mineralogy analyses were also conducted. An analysis of the spatial-temporal land use and cover changes was undertaken using satellite imagery spanning the period between 1985 and 2015. Landslides were noted to concentrate along topographic hollows in the landscape. The occurrence is dominant where slope gradient is between 25˚ and 35˚, profile curvature between 0.1 and 5, TWI between 8 and 18, SPI >10 and TPI between -1 and 1. Landslides are less pronounced on slope zones where slope gradient is <15˚ and >45˚, profile curvature <0, TWI <8 and >18, SPI <10 and TPI >1. Deep soil profiles ranging between 2.5 and 7 meters are a major characteristic of the study area. Soils are characterized by clay pans at a depth ranging between 0.75 and 3 meters within the profiles. The study area is dominated by clay texture, except for the uppermost surface horizons, which are loamy sand. All surface horizons analysed had the percentage of sand, silt and clay ranging from 33 to 55%, 22 to 40% and 10 to 30% respectively. In the deeper horizons, sand was observed to reduce drastically to less than 23%, while clay increased to greater than 50%. The clay content is very high in the deeper horizons exceeding 35%. By implication, such soils with a very high clay content and plasticity index are considered as Vertisols, with a profound influence in the occurrence of landslides. The top soil predominantly contains more quartz, while subsurface horizons have considerable amounts of illite/muscovite as the dominant clay minerals, ranging from 43% to 47 %. The liquid limit, plasticity index, computed weighted plasticity index (PIw), expansiveness (ɛex) and dispersion ranging from 50, 22, 17, 10 and 23 to 66, 44,34,54 and 64, respectively also have strong implications for landslide occurrence. Landslides are not normally experienced during or immediately after extreme rainfall events but occur later in the rainfall season. By implication, this time lag in landslide occurrence and rainfall distribution, is due to the initial infiltration through quartz dominated upper soil layers, before illite/muscovite clays in the lower soil horizons get saturated. Whereas forest cover reduced from 40 % in 1985 to 8% in 2015, cultivated land and settlements increased from 16% and 11% to 52% and 25% respectively during the same period. The distribution of cultivated land decreased in lower slope sections within gradient group < 15˚ by 59%. It however increased in upper sections within gradient cluster 25˚ to 35˚ by over 85% during the study period. There is a shift of cultivated land to the steeper sensitive upper slope elements associated with landslides in the study area. More than 50% of the landslides are occurring on cultivated land, 20% on settlements while less than 15 % and 10% are occurring on grassland and forests with degraded areas respectively. Landslides in Kigezi highlands are triggered by a complex interaction of multiple- factors, including dynamic triggers and ground condition variables. Topographic hollows are convergence zones within the landscape where all the parameters interact to cause landslides. Topographic hollows are therefore potential and actual landslide sites in the study area. Characterized by deep soil horizons with high clay content dominated by illite/muscovite minerals in the sub soils and profile concave forms with moderately steep slopes, topographic hollows are the most vulnerable slope elements to landslide occurrence. The spatial temporal patterns of landslide occurrence in the study area has changed due to increased cultivation of steep middle and upper slopes. Characterized by deep soil horizons with high clay content dominated by illite/muscovite minerals in the sub soils and profile concave forms with moderately steep slopes, topographic hollows are the most vulnerable slope elements to landslide occurrence. The spatial-temporal patterns of landslide occurrence in the study area has changed due to increased cultivation of steep middle and upper slopes. A close spatial and temporal correlation between land use/cover changes and landslide occurrence is discernible. The understanding of these topographical, pedological and land use/cover parameters and their influence on landslide occurrence is important in land management. It is now possible to identify and predict actual and potential landslide zones, and also demarcate safer zones for community activities. The information generated about the area’s topographic, pedological and land cover characteristics should help in vulnerability mitigation and enhance community resilience to landslide hazards in this fragile highland ecosystem. This can be done through designating zones for community activities while avoiding potential landslide zones. It is also recommended that, tree cover restoration be done in the highlands and the farmers encouraged to re-establish terrace farming while avoiding cultivation of sensitive steep middle and upper slope sections.
- Full Text:
- Date Issued: 2018
A chemo-enzymatic process for the production of beta-thymidine, a key intermediate in antiretrovirol manufacture
- Gordon, Gregory Ernest Robert
- Authors: Gordon, Gregory Ernest Robert
- Date: 2010
- Subjects: HIV infections -- Treatment -- South Africa , HIV infections -- South Africa -- Prevention , Antiretroviral agents
- Language: English
- Type: Thesis , Doctoral , DTech
- Identifier: vital:10423 , http://hdl.handle.net/10948/d1016217
- Description: The socio-economic impact of HIV/AIDS on South Africa has resulted in lower gross domestic product, loss of skills in key sectors such as education, and increased health-care costs in providing access to treatment. Currently active pharmaceutical ingredients (API’s) such as stavudine (d4T) and azidothymidine (AZT) are imported from India and China, while formulation is conducted locally. A strategy was initiated between CSIR Biosciences and LIFElab under the auspices of Arvir Technologies to investigate the feasibility of local antiretroviral manufacture (d4T and AZT) or the manufacture of a key intermediate such as β- thymidine (dT). Several advantages associated with successful implementation of this strategy include ensuring a local supply of API’s, thus reducing reliance on procurement from foreign sources and reducing the effect of foreign exchange rate fluctuations on providing cost effective access to treatment. A local supply source would also reduce the imports and thus aid the balance of payments deficit, and in addition to this, provide stimulus in the local pharmaceutical manufacturing industry (which has been in decline for several decades), resulting in increased skills and employment opportunities. This thesis describes the development of a superior chemo-enzymatic process for the production of β-thymidine (72 percent yield, prior to isolation), a key intermediate in the preparation of anti-retrovirals. Alternative processes based purely on chemical or bioprocess transformations to prepare either 5-methyluridine (5-MU) or dT suffer from several disadvantages: lengthy transformations due to protection/deprotection strategies, low selectivties and product yields (30 percent in the chemical process) and isolation of the product from dilute process streams requiring the use of large uneconomical reactors (bioprocesss). This contributes significantly to the cost of d4T and AZT manufacture. Our novel chemoenzymatic process comprises of a biocatalytic reaction for the production of 5-MU, with subsequent chemical transformation into dT (3 steps) negating and circumventing the limitations of the chemical or bioprocess routes. During the course of this project development, the β-thymidine selling price declined from 175 $/kg (2005) to 100 $/kg (2008). However, the process described in this work is still competitive based on the current β- thymidine selling price of 100 $/kg. The process economics show that with further optimization and increasing the isolated dT yield from 70 percent to 90 percent, the variable cost decreases from 136 $/kg to 110 $/kg. The increase in isolated yield is highly probable, based on solubility data of β-thymidine. The decrease in β-thymidine selling price and technological improvement in dT manufacture should translate into lower API manufacture costs and more cost effective access to treatment. Our novel biocatalytic process producing 5-MU uses a coupled enzyme system employing PNP, Purine Nucleoside Phosphorylase and PyNP, Pyrimidine Nucleoside Phosphorylase. The overall transglycosylation reaction may be decoupled into the phosphorolysis reaction (PNP) and synthesis reaction (PyNP). During the phosphorolysis reaction, guanosine is converted into guanine and ribose-1-phosphate (R-1-P) in the presence of PNP enzyme. The reaction intermediate R-1-P is then coupled to thymine in the presence of PyNP enzyme during the synthesis reaction, producing 5-MU. The process was scaled up from lab-scale to bench-scale (10 - 20 L) and demonstrated to be robust and reproducible. This is evident from the average guanosine conversion (94.7 percent ± 2.03) and 5-MU yield (88.2 percent ± 6.21) and mole balance (104 percent ± 7.61) which were obtained at bench-scale (3 replicates, 10 L). The reaction was carried out at reactor productivities of between 7 – 11 g.L-1.h-1. The integration of the biocatalytic process and chemical processes was successfully carried out, showing that 5-MU produced using our novel biocatalytic process behaved similarly to commercially available 5- MU (ex. Dayang Chemicals, China). A PCT patent application (Ref. No. P44422PC01) on this chemo-enzymatic process has been filed and currently public private partnerships are being explored through Arvir Technologies to evaluate and validate this technology at one ton scale.
- Full Text:
- Date Issued: 2010
- Authors: Gordon, Gregory Ernest Robert
- Date: 2010
- Subjects: HIV infections -- Treatment -- South Africa , HIV infections -- South Africa -- Prevention , Antiretroviral agents
- Language: English
- Type: Thesis , Doctoral , DTech
- Identifier: vital:10423 , http://hdl.handle.net/10948/d1016217
- Description: The socio-economic impact of HIV/AIDS on South Africa has resulted in lower gross domestic product, loss of skills in key sectors such as education, and increased health-care costs in providing access to treatment. Currently active pharmaceutical ingredients (API’s) such as stavudine (d4T) and azidothymidine (AZT) are imported from India and China, while formulation is conducted locally. A strategy was initiated between CSIR Biosciences and LIFElab under the auspices of Arvir Technologies to investigate the feasibility of local antiretroviral manufacture (d4T and AZT) or the manufacture of a key intermediate such as β- thymidine (dT). Several advantages associated with successful implementation of this strategy include ensuring a local supply of API’s, thus reducing reliance on procurement from foreign sources and reducing the effect of foreign exchange rate fluctuations on providing cost effective access to treatment. A local supply source would also reduce the imports and thus aid the balance of payments deficit, and in addition to this, provide stimulus in the local pharmaceutical manufacturing industry (which has been in decline for several decades), resulting in increased skills and employment opportunities. This thesis describes the development of a superior chemo-enzymatic process for the production of β-thymidine (72 percent yield, prior to isolation), a key intermediate in the preparation of anti-retrovirals. Alternative processes based purely on chemical or bioprocess transformations to prepare either 5-methyluridine (5-MU) or dT suffer from several disadvantages: lengthy transformations due to protection/deprotection strategies, low selectivties and product yields (30 percent in the chemical process) and isolation of the product from dilute process streams requiring the use of large uneconomical reactors (bioprocesss). This contributes significantly to the cost of d4T and AZT manufacture. Our novel chemoenzymatic process comprises of a biocatalytic reaction for the production of 5-MU, with subsequent chemical transformation into dT (3 steps) negating and circumventing the limitations of the chemical or bioprocess routes. During the course of this project development, the β-thymidine selling price declined from 175 $/kg (2005) to 100 $/kg (2008). However, the process described in this work is still competitive based on the current β- thymidine selling price of 100 $/kg. The process economics show that with further optimization and increasing the isolated dT yield from 70 percent to 90 percent, the variable cost decreases from 136 $/kg to 110 $/kg. The increase in isolated yield is highly probable, based on solubility data of β-thymidine. The decrease in β-thymidine selling price and technological improvement in dT manufacture should translate into lower API manufacture costs and more cost effective access to treatment. Our novel biocatalytic process producing 5-MU uses a coupled enzyme system employing PNP, Purine Nucleoside Phosphorylase and PyNP, Pyrimidine Nucleoside Phosphorylase. The overall transglycosylation reaction may be decoupled into the phosphorolysis reaction (PNP) and synthesis reaction (PyNP). During the phosphorolysis reaction, guanosine is converted into guanine and ribose-1-phosphate (R-1-P) in the presence of PNP enzyme. The reaction intermediate R-1-P is then coupled to thymine in the presence of PyNP enzyme during the synthesis reaction, producing 5-MU. The process was scaled up from lab-scale to bench-scale (10 - 20 L) and demonstrated to be robust and reproducible. This is evident from the average guanosine conversion (94.7 percent ± 2.03) and 5-MU yield (88.2 percent ± 6.21) and mole balance (104 percent ± 7.61) which were obtained at bench-scale (3 replicates, 10 L). The reaction was carried out at reactor productivities of between 7 – 11 g.L-1.h-1. The integration of the biocatalytic process and chemical processes was successfully carried out, showing that 5-MU produced using our novel biocatalytic process behaved similarly to commercially available 5- MU (ex. Dayang Chemicals, China). A PCT patent application (Ref. No. P44422PC01) on this chemo-enzymatic process has been filed and currently public private partnerships are being explored through Arvir Technologies to evaluate and validate this technology at one ton scale.
- Full Text:
- Date Issued: 2010
A clip composition case study of communal wool production in the Eastern Cape, South Africa
- Authors: Dreyer, Susanna Maria
- Date: 2019
- Subjects: Wool industry -- South Africa -- Eastern Cape , Wool -- South Africa -- Eastern Cape Sheep industry -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/39480 , vital:35265
- Description: Previous studies conducted on wool production in the communal areas of the Eastern Cape have concluded future research should focus on whether the observed differences in average wool price received between shearing sheds are due to differences in clip preparation (i.e. classing) or differences in the quality of the wool being produced (i.e. genetics).The objective of this study was to establish whether there are indeed geographical differences in the average wool price received by communal wool producers in the Eastern Cape and, if so, whether this difference in earnings is attributable to differences in the quality of wool produced and/or clip preparation. The current research explored eight years of wool production records of communal wool farmers (2009/10 to 2016/17) obtained from BKB, the largest wool broker in South Africa. Statistical analyses included descriptive statistics, analysis of variance, parametric tests (i.e. t-test) and multiple regression analysis. The conclusions drawn from this study are: that there are indeed statistically significant differences in the average wool price received between the different geographic areas of the Eastern Cape communal regions, and that the primary determining factor is wool quality, while clip preparation also plays an important but secondary role. The study identified specific geographic areas where developmental interventions are most critical, with specific emphasis on improving the genetic composition of the wool sheep flocks. Specific strategies are recommended, namely:Removing inferior-quality rams and replacing them with superior-quality rams to prevent any inferior nondescript rams from breeding and producing progeny; Replacing the inferior-quality nondescript ewes in specific areas with superior-quality ewes, and Improving the survival rate of lambs and thereby contributing towards expediting the rate of genetic improvement of the communal wool sheep flocks.
- Full Text:
- Date Issued: 2019
- Authors: Dreyer, Susanna Maria
- Date: 2019
- Subjects: Wool industry -- South Africa -- Eastern Cape , Wool -- South Africa -- Eastern Cape Sheep industry -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/39480 , vital:35265
- Description: Previous studies conducted on wool production in the communal areas of the Eastern Cape have concluded future research should focus on whether the observed differences in average wool price received between shearing sheds are due to differences in clip preparation (i.e. classing) or differences in the quality of the wool being produced (i.e. genetics).The objective of this study was to establish whether there are indeed geographical differences in the average wool price received by communal wool producers in the Eastern Cape and, if so, whether this difference in earnings is attributable to differences in the quality of wool produced and/or clip preparation. The current research explored eight years of wool production records of communal wool farmers (2009/10 to 2016/17) obtained from BKB, the largest wool broker in South Africa. Statistical analyses included descriptive statistics, analysis of variance, parametric tests (i.e. t-test) and multiple regression analysis. The conclusions drawn from this study are: that there are indeed statistically significant differences in the average wool price received between the different geographic areas of the Eastern Cape communal regions, and that the primary determining factor is wool quality, while clip preparation also plays an important but secondary role. The study identified specific geographic areas where developmental interventions are most critical, with specific emphasis on improving the genetic composition of the wool sheep flocks. Specific strategies are recommended, namely:Removing inferior-quality rams and replacing them with superior-quality rams to prevent any inferior nondescript rams from breeding and producing progeny; Replacing the inferior-quality nondescript ewes in specific areas with superior-quality ewes, and Improving the survival rate of lambs and thereby contributing towards expediting the rate of genetic improvement of the communal wool sheep flocks.
- Full Text:
- Date Issued: 2019
A combination of platinum anticancer drugs and mangiferin causes increased efficacy in cancer cell lines
- Authors: Du Plessis-Stoman, Debbie
- Date: 2010
- Subjects: Cancer -- Chemotherapy , Antineoplastic agents , Platinum compounds -- Therapeutic use , Cancer cells
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:10338 , http://hdl.handle.net/10948/d1016160
- Description: This thesis mainly deals with some biochemical aspects regarding the efficacy of novel platinum anticancer compounds alone and in combination with mangiferin, as part of a broader study in which both chemistry and biochemistry are involved. Various novel diamine and N-S donor chelate compounds of platinum II and IV have been developed in which factors such as stereochemistry, ligand exchange rate and biocompatibility were considered as additional parameters. In the first order testing, each of these compounds was tested with reference to their “killing” potential by comparing their rate of killing, over a period of 48 hours with those of cisplatin and oxaliplatin. Numerous novel compounds were tested in this way, using the MTT cell viability assay and the three cancer cell lines MCF7, HT29 and HeLa. Although only a few could be regarded as equal to or even better than cisplatin, CPA7 and oxaliplatin, the testing of these compounds on cancer cells provided useful knowledge for the further development of novel compounds. Three of the better compounds, namely Yol 25, Yol 29.1 and Mar 4.1.4 were selected for further studies, together with oxaliplatin and CPA7 as positive controls, to obtain more detailed knowledge of their anticancer action, both alone and when applied in combination with mangiferin. In addition to the above, resistant cells were produced for each of the three different cell lines tested and all the selected compounds, both in the presence and absence of mangiferin. The effects of these treatments on the activation of NFĸB when applied to normal and resistant cell lines were also investigated. All the compounds induced apoptosis in the cell lines tested as well as alter the DNA cycle at one or more phase. Additionally, combination of these compounds with mangiferin enhanced the above-mentioned effects. Mangiferin decreases the IC50 values of the platinum drugs by up to 3.4 times and, although mangiferin alone did not induce cell cycle arrest, the presence of mangiferin in combination with oxaliplatin and Yol 25 shows an earlier and greatly enhanced delay in the S-phase, while cells treated with CPA7, Yol 29.1 and Mar 4.1.4 in combination with mangiferin showed a later, but greatly enhanced delay in the S-phase. It was also found that mangiferin acts as an NFĸB inhibitor when applied in combination with these drugs, which, in turn, reduces the occurrence of resistance in the cell lines. Resistance to oxaliplatin was counteracted by the combination with mangiferin in HeLa and HT29, but not in MCF7 cells, while resistance to CPA7 was only counteracted in the MCF7 cell line. Yol 25 and Mar 4.1.4 did not seem to induce resistance in HeLa and MCF7 cells, but did in HT29 cells, whereas Yol 29.1 caused resistance in HeLa and HT29 cells, but not in MCF7 cells. Finally, an effort was made to evaluate the different compounds by comparing them with respect to their properties relating to anticancer action with and without the addition of mangiferin.
- Full Text:
- Date Issued: 2010
- Authors: Du Plessis-Stoman, Debbie
- Date: 2010
- Subjects: Cancer -- Chemotherapy , Antineoplastic agents , Platinum compounds -- Therapeutic use , Cancer cells
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:10338 , http://hdl.handle.net/10948/d1016160
- Description: This thesis mainly deals with some biochemical aspects regarding the efficacy of novel platinum anticancer compounds alone and in combination with mangiferin, as part of a broader study in which both chemistry and biochemistry are involved. Various novel diamine and N-S donor chelate compounds of platinum II and IV have been developed in which factors such as stereochemistry, ligand exchange rate and biocompatibility were considered as additional parameters. In the first order testing, each of these compounds was tested with reference to their “killing” potential by comparing their rate of killing, over a period of 48 hours with those of cisplatin and oxaliplatin. Numerous novel compounds were tested in this way, using the MTT cell viability assay and the three cancer cell lines MCF7, HT29 and HeLa. Although only a few could be regarded as equal to or even better than cisplatin, CPA7 and oxaliplatin, the testing of these compounds on cancer cells provided useful knowledge for the further development of novel compounds. Three of the better compounds, namely Yol 25, Yol 29.1 and Mar 4.1.4 were selected for further studies, together with oxaliplatin and CPA7 as positive controls, to obtain more detailed knowledge of their anticancer action, both alone and when applied in combination with mangiferin. In addition to the above, resistant cells were produced for each of the three different cell lines tested and all the selected compounds, both in the presence and absence of mangiferin. The effects of these treatments on the activation of NFĸB when applied to normal and resistant cell lines were also investigated. All the compounds induced apoptosis in the cell lines tested as well as alter the DNA cycle at one or more phase. Additionally, combination of these compounds with mangiferin enhanced the above-mentioned effects. Mangiferin decreases the IC50 values of the platinum drugs by up to 3.4 times and, although mangiferin alone did not induce cell cycle arrest, the presence of mangiferin in combination with oxaliplatin and Yol 25 shows an earlier and greatly enhanced delay in the S-phase, while cells treated with CPA7, Yol 29.1 and Mar 4.1.4 in combination with mangiferin showed a later, but greatly enhanced delay in the S-phase. It was also found that mangiferin acts as an NFĸB inhibitor when applied in combination with these drugs, which, in turn, reduces the occurrence of resistance in the cell lines. Resistance to oxaliplatin was counteracted by the combination with mangiferin in HeLa and HT29, but not in MCF7 cells, while resistance to CPA7 was only counteracted in the MCF7 cell line. Yol 25 and Mar 4.1.4 did not seem to induce resistance in HeLa and MCF7 cells, but did in HT29 cells, whereas Yol 29.1 caused resistance in HeLa and HT29 cells, but not in MCF7 cells. Finally, an effort was made to evaluate the different compounds by comparing them with respect to their properties relating to anticancer action with and without the addition of mangiferin.
- Full Text:
- Date Issued: 2010
A commercial process development for plant food formulation using polyprotic acids from natural extracts as chelating agents
- Authors: Ndibewu, Peter Papoh
- Date: 2005
- Subjects: Chelates , Lemon juice , Liquid fertilizers
- Language: English
- Type: Thesis , Doctoral , DTech (Chemistry)
- Identifier: vital:10368 , http://hdl.handle.net/10948/153 , Chelates , Lemon juice , Liquid fertilizers
- Description: The citrus industry is one of South Africa's largest agricultural sectors in terms of export earnings with lemon fruits and juice as a trendsetter due to their high grade quality. According to growers, the Eastern Cape Province of South Africa alone produces an excess of about 10-14,000 tons of lemon juice which is presently of no economic value due to the sour taste and “bitterness”. As a result of this excess and in order to make use of the polyprotic acids naturally occurring in the lemon juice, four fertilizer nutrient mixtures are formulated, using lemon juice as base. From a conceptual scientific approach, characterization (physico-chemical and functional properties determinations) of Eureka Lemon fruit juices were undertaken, followed by smaller scale batch formulation experiments. On the basis that these lemon juice-based fertilizer mixtures are prepared following standard liquid fertilizer formulation guidelines, a field test was conducted to evaluate their potential effectiveness to influence plant growth. A growth chamber testing on tomato plants revealed high growth response (> 99.9 % certainty) potential in two of the semi-organic mixtures formulated while the organic mixture showed a relatively good growth rate as compared to the control (pure tap water). According to statistical analysis (ANOVA) comparison, two of the semi-organic mixtures performed considerably better than the two commercial samples evaluated. Potential benefits profoundly associated with these nutrient mixtures as compared to similar liquid fertilizer products on the market is that most nutrients are chelated and dissolved in solution. Also, the mixtures contain all necessary nutrients including plant growth substances required for healthier plant growth. The most important socioeconomic impact is the value addition to the technology chain in the citrus industry. The use of fluid fertilizers in significant quantities is less than twenty years old. Nevertheless, growth has been so rapid that in South Africa demand for mixed liquid fertilizer has greatly increased from 90 000 tons NPK & blended micronutrients in 1955 to more than 600 000 per annum tons today (Report 41/2003, Department of Minerals and Energy). The liquid fertilizers market is sparsely specialized with major competitors like Omnia, Kynoch and Foskor supplying more than 50 % of the market demand. Amongst the nutrient mixtures formulated, mixture one is an NPK (1-1-2) based nutrient mixture containing both secondary nutrients (0.5 % Mg & 1.0 % Ca) and seven micronutrients (0.1 % Fe, 0.05 % Cu, 0.05 % Zn, 0.05 % Mn, 0.02 % B, 0.0005 % Mo and 0.0005 % Co). The composition of this mixture offers the formula a potential to be used as a general purpose (all stages of plant growth) fertilization mixture in view of its balanced composition (containing all essential plant nutrients). Mixture two contains essentially the micronutrients and in higher concentrations (0.3 % Fe, 0.3 % Cu, 0.1 % Zn, 0.2 % Mn, 0.02 % B, 0.0005 % Mo and 0.0005 % Co) as compared to mixture one except for boron, molybdenum and cobalt. The concentration of the micronutrients contained in this mixture is adequately high which offers a potential for it to be used in supplementing nutrition in plants with critical micronutrient-deficient symptoms. Mixture three is very similar to mixture two (1.0 % Fe, 0.05 % Cu, 0.05 % Zn, 0.05 Mn, 0.05 % B, 0.0005 % Mo and 0.0005 % Co) except that the concentrations of all seven micronutrients are considerably less than those of contained in mixture two. However, the concentration of iron in this mixture is as high as 1.0 %. The mixture has a potential to be used in high iron-deficient situations. Mixture four is an organic formula with relatively low nutrient concentrations (NPK-0.02-0.02-1, 0.27 % Mg, 0.02 % Ca, 0.008 % Fe, 0.26 % Cu, 0.012 % Zn, 0.009 % Mn). Nevertheless, this mixture is appealing for organically grown crops where the use of chemicals is prohibited by standards. These lemon juice-based nutrient mixtures were further characterized and tested for stability and storability over a period of eight weeks. This study revealed no major change in the physical quality (colour, pH and “salt out” effect). The basic formulation methodology is a two-step procedure that involves filtration of the lemon juice to remove membranous materials, mixing at ambient temperature and stabilization of the nutrient mixtures. However, for the organic nutrient formula mix, filtration follows after extraction of nutrients from plant materials using the lemon juice.
- Full Text:
- Date Issued: 2005
- Authors: Ndibewu, Peter Papoh
- Date: 2005
- Subjects: Chelates , Lemon juice , Liquid fertilizers
- Language: English
- Type: Thesis , Doctoral , DTech (Chemistry)
- Identifier: vital:10368 , http://hdl.handle.net/10948/153 , Chelates , Lemon juice , Liquid fertilizers
- Description: The citrus industry is one of South Africa's largest agricultural sectors in terms of export earnings with lemon fruits and juice as a trendsetter due to their high grade quality. According to growers, the Eastern Cape Province of South Africa alone produces an excess of about 10-14,000 tons of lemon juice which is presently of no economic value due to the sour taste and “bitterness”. As a result of this excess and in order to make use of the polyprotic acids naturally occurring in the lemon juice, four fertilizer nutrient mixtures are formulated, using lemon juice as base. From a conceptual scientific approach, characterization (physico-chemical and functional properties determinations) of Eureka Lemon fruit juices were undertaken, followed by smaller scale batch formulation experiments. On the basis that these lemon juice-based fertilizer mixtures are prepared following standard liquid fertilizer formulation guidelines, a field test was conducted to evaluate their potential effectiveness to influence plant growth. A growth chamber testing on tomato plants revealed high growth response (> 99.9 % certainty) potential in two of the semi-organic mixtures formulated while the organic mixture showed a relatively good growth rate as compared to the control (pure tap water). According to statistical analysis (ANOVA) comparison, two of the semi-organic mixtures performed considerably better than the two commercial samples evaluated. Potential benefits profoundly associated with these nutrient mixtures as compared to similar liquid fertilizer products on the market is that most nutrients are chelated and dissolved in solution. Also, the mixtures contain all necessary nutrients including plant growth substances required for healthier plant growth. The most important socioeconomic impact is the value addition to the technology chain in the citrus industry. The use of fluid fertilizers in significant quantities is less than twenty years old. Nevertheless, growth has been so rapid that in South Africa demand for mixed liquid fertilizer has greatly increased from 90 000 tons NPK & blended micronutrients in 1955 to more than 600 000 per annum tons today (Report 41/2003, Department of Minerals and Energy). The liquid fertilizers market is sparsely specialized with major competitors like Omnia, Kynoch and Foskor supplying more than 50 % of the market demand. Amongst the nutrient mixtures formulated, mixture one is an NPK (1-1-2) based nutrient mixture containing both secondary nutrients (0.5 % Mg & 1.0 % Ca) and seven micronutrients (0.1 % Fe, 0.05 % Cu, 0.05 % Zn, 0.05 % Mn, 0.02 % B, 0.0005 % Mo and 0.0005 % Co). The composition of this mixture offers the formula a potential to be used as a general purpose (all stages of plant growth) fertilization mixture in view of its balanced composition (containing all essential plant nutrients). Mixture two contains essentially the micronutrients and in higher concentrations (0.3 % Fe, 0.3 % Cu, 0.1 % Zn, 0.2 % Mn, 0.02 % B, 0.0005 % Mo and 0.0005 % Co) as compared to mixture one except for boron, molybdenum and cobalt. The concentration of the micronutrients contained in this mixture is adequately high which offers a potential for it to be used in supplementing nutrition in plants with critical micronutrient-deficient symptoms. Mixture three is very similar to mixture two (1.0 % Fe, 0.05 % Cu, 0.05 % Zn, 0.05 Mn, 0.05 % B, 0.0005 % Mo and 0.0005 % Co) except that the concentrations of all seven micronutrients are considerably less than those of contained in mixture two. However, the concentration of iron in this mixture is as high as 1.0 %. The mixture has a potential to be used in high iron-deficient situations. Mixture four is an organic formula with relatively low nutrient concentrations (NPK-0.02-0.02-1, 0.27 % Mg, 0.02 % Ca, 0.008 % Fe, 0.26 % Cu, 0.012 % Zn, 0.009 % Mn). Nevertheless, this mixture is appealing for organically grown crops where the use of chemicals is prohibited by standards. These lemon juice-based nutrient mixtures were further characterized and tested for stability and storability over a period of eight weeks. This study revealed no major change in the physical quality (colour, pH and “salt out” effect). The basic formulation methodology is a two-step procedure that involves filtration of the lemon juice to remove membranous materials, mixing at ambient temperature and stabilization of the nutrient mixtures. However, for the organic nutrient formula mix, filtration follows after extraction of nutrients from plant materials using the lemon juice.
- Full Text:
- Date Issued: 2005
A comparative assessment of dairy calf feeding management systems at Fernwood Dairy Farm, Alexandria, Eastern Cape
- Phakwago, Potego Steward Kgaditsi
- Authors: Phakwago, Potego Steward Kgaditsi
- Date: 2014
- Subjects: Dairy cattle -- Nutrition -- Requirements , Dairy cattle -- Feeding and feeds , Cattle -- Feed utilization efficiency
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/48069 , vital:40468
- Description: The study compared fresh milk as group control to three different milk replacers (Blossom® Easymix, Denkavit® Milk-Bar and Surromel® Calf) and two milk supplements (Byboost Calf® and SupaCalf®) mixed with fresh milk at Fernwood Dairy Farm in Alexandria, Eastern Cape. The objectives of the study were to compare the growth rate of the calves in a trial from day two to 49 at weaning and to calculate average daily gain with the aim of comparison of the cost/weight gain ratio of each liquid feed fed. Sixty Holstein (60) heifer calves were used in a completely randomised design to calculate average daily body weight gains in the six calf groups fed six different milk feeds. Calves were fed four litres liquid feeds every day. Water and solid feeds (Olifantskop® calf starter pellets and lucerne hay) were available. Results comprise of details regarding weather conditions, weight gain results, and body stature measurements, including body weight, wither height, hip height and heart girth. Statistical analysis of the weight gain and body stature measurements was essential to determine the usefulness and reliability of the research data. Results of the statistical calculations indicated that the body weight gain data provided very useful results with statistical significant differences between the six groups (F=5.09; P=0.0008). Body stature measurements are not as reliable. Results are summarised as follows: Liquid feed Cost/kg weight gain Average daily gain • Fresh milk R 34.29 0.50 kg/day • Blossom®Easymix R39.25 0.35 kg/day • Denkavit® Milk-Bar R22.57 0.42 kg/day • Surromel® Calf R23.48 0.39 kg/day • Fresh milk + Byboost Calf® R37.46 0.47 kg/day • Fresh milk +SupaCalf® R29.76 0.62 kg/day Comparison of the cost/weight gain ratio of milk replacers and fresh milk draws the following conclusions: The cost of feeding a calf was significantly lower when milk replacers Denkavit® and Surromel® were used; however this yielded a lower average daily gain when compared with that of fresh milk. Denkavit® milk replacer had a lower cost than fresh milk in terms of the average daily gain. The cost of the Denkavit was the lowest of all the products (R22.56/kg) and was in the fourth position in weight gain (0.42kg/day). Surromel® lay in the fifth place for both cost (R23.48/kg) and weight gain (0.39 kg/day). Blossom® Easymix milk replacer had a higher cost than fresh milk. Blossom was the most costly of all the feeds (R39.25/kg) but had the lowest average daily gain (0.35 kg/day). Comparison of fresh milk plus additives to fresh milk alone: The use of SupaCalf® additive to fresh milk resulted in the highest average daily gain of 0.62 kg/day at a cost of R29.76/kg which was more cost effective than the control fresh milk group (0.50 kg/day, R34.29/kg), When using Byboost® additive the average daily gain of 0.47 kg/day at a cost of R37.46, less cost effective than fresh milk (0.50 kg/day, R34.29). Statistical analysis of body stature measurements yielded one significant result(F=3.20; p=0.0140) confirming that use of SupaCalf® additive resulted in the biggest heart girth increase at 16.90 cm and the smallest being Blossom® Easymix at 11.88 cm. Figure for the control fresh milk group was 12.86 cm. Dairy calves all over the world are fed different feeds depending on the farm owner or manager’s preference and budget. For those who have been in the industry for a while as well as the newcomers, this study can help when weighing options and deciding on which feeds to use.
- Full Text:
- Date Issued: 2014
- Authors: Phakwago, Potego Steward Kgaditsi
- Date: 2014
- Subjects: Dairy cattle -- Nutrition -- Requirements , Dairy cattle -- Feeding and feeds , Cattle -- Feed utilization efficiency
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/48069 , vital:40468
- Description: The study compared fresh milk as group control to three different milk replacers (Blossom® Easymix, Denkavit® Milk-Bar and Surromel® Calf) and two milk supplements (Byboost Calf® and SupaCalf®) mixed with fresh milk at Fernwood Dairy Farm in Alexandria, Eastern Cape. The objectives of the study were to compare the growth rate of the calves in a trial from day two to 49 at weaning and to calculate average daily gain with the aim of comparison of the cost/weight gain ratio of each liquid feed fed. Sixty Holstein (60) heifer calves were used in a completely randomised design to calculate average daily body weight gains in the six calf groups fed six different milk feeds. Calves were fed four litres liquid feeds every day. Water and solid feeds (Olifantskop® calf starter pellets and lucerne hay) were available. Results comprise of details regarding weather conditions, weight gain results, and body stature measurements, including body weight, wither height, hip height and heart girth. Statistical analysis of the weight gain and body stature measurements was essential to determine the usefulness and reliability of the research data. Results of the statistical calculations indicated that the body weight gain data provided very useful results with statistical significant differences between the six groups (F=5.09; P=0.0008). Body stature measurements are not as reliable. Results are summarised as follows: Liquid feed Cost/kg weight gain Average daily gain • Fresh milk R 34.29 0.50 kg/day • Blossom®Easymix R39.25 0.35 kg/day • Denkavit® Milk-Bar R22.57 0.42 kg/day • Surromel® Calf R23.48 0.39 kg/day • Fresh milk + Byboost Calf® R37.46 0.47 kg/day • Fresh milk +SupaCalf® R29.76 0.62 kg/day Comparison of the cost/weight gain ratio of milk replacers and fresh milk draws the following conclusions: The cost of feeding a calf was significantly lower when milk replacers Denkavit® and Surromel® were used; however this yielded a lower average daily gain when compared with that of fresh milk. Denkavit® milk replacer had a lower cost than fresh milk in terms of the average daily gain. The cost of the Denkavit was the lowest of all the products (R22.56/kg) and was in the fourth position in weight gain (0.42kg/day). Surromel® lay in the fifth place for both cost (R23.48/kg) and weight gain (0.39 kg/day). Blossom® Easymix milk replacer had a higher cost than fresh milk. Blossom was the most costly of all the feeds (R39.25/kg) but had the lowest average daily gain (0.35 kg/day). Comparison of fresh milk plus additives to fresh milk alone: The use of SupaCalf® additive to fresh milk resulted in the highest average daily gain of 0.62 kg/day at a cost of R29.76/kg which was more cost effective than the control fresh milk group (0.50 kg/day, R34.29/kg), When using Byboost® additive the average daily gain of 0.47 kg/day at a cost of R37.46, less cost effective than fresh milk (0.50 kg/day, R34.29). Statistical analysis of body stature measurements yielded one significant result(F=3.20; p=0.0140) confirming that use of SupaCalf® additive resulted in the biggest heart girth increase at 16.90 cm and the smallest being Blossom® Easymix at 11.88 cm. Figure for the control fresh milk group was 12.86 cm. Dairy calves all over the world are fed different feeds depending on the farm owner or manager’s preference and budget. For those who have been in the industry for a while as well as the newcomers, this study can help when weighing options and deciding on which feeds to use.
- Full Text:
- Date Issued: 2014
A comparative study of artificial neural networks and physics models as simulators in evolutionary robotics
- Pretorius, Christiaan Johannes
- Authors: Pretorius, Christiaan Johannes
- Date: 2019
- Subjects: Neural networks (Computer science)
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10948/30789 , vital:31131
- Description: The Evolutionary Robotics (ER) process is a technique that applies evolutionary optimization algorithms to the task of automatically developing, or evolving, robotic control programs. These control programs, or simply controllers, are evolved in order to allow a robot to perform a required task. During the ER process, use is often made of robotic simulators to evaluate the performance of candidate controllers that are produced in the course of the controller evolution process. Such simulators accelerate and otherwise simplify the controller evolution process, as opposed to the more arduous process of evaluating controllers in the real world without use of simulation. To date, the vast majority of simulators that have been applied in ER are physics- based models which are constructed by taking into account the underlying physics governing the operation of the robotic system in question. An alternative approach to simulator implementation in ER is the usage of Artificial Neural Networks (ANNs) as simulators in the ER process. Such simulators are referred to as Simulator Neural Networks (SNNs). Previous studies have indicated that SNNs can successfully be used as an alter- native to physics-based simulators in the ER process on various robotic platforms. At the commencement of the current study it was not, however, known how this relatively new method of simulation would compare to traditional physics-based simulation approaches in ER. The study presented in this thesis thus endeavoured to quantitatively compare SNNs and physics-based models as simulators in the ER process. In order to con- duct this comparative study, both SNNs and physics simulators were constructed for the modelling of three different robotic platforms: a differentially-steered robot, a wheeled inverted pendulum robot and a hexapod robot. Each of these two types of simulation was then used in simulation-based evolution processes to evolve con- trollers for each robotic platform. During these controller evolution processes, the SNNs and physics models were compared in terms of their accuracy in making pre- dictions of robotic behaviour, their computational efficiency in arriving at these predictions, the human effort required to construct each simulator and, most im- portantly, the real-world performance of controllers evolved by making use of each simulator. The results obtained in this study illustrated experimentally that SNNs were, in the majority of cases, able to make more accurate predictions than the physics- based models and these SNNs were arguably simpler to construct than the physics simulators. Additionally, SNNs were also shown to be a computationally efficient alternative to physics-based simulators in ER and, again in the majority of cases, these SNNs were able to produce controllers which outperformed those evolved in the physics-based simulators, when these controllers were uploaded to the real-world robots. The results of this thesis thus suggest that SNNs are a viable alternative to more commonly-used physics simulators in ER and further investigation of the potential of this simulation technique appears warranted.
- Full Text:
- Date Issued: 2019
- Authors: Pretorius, Christiaan Johannes
- Date: 2019
- Subjects: Neural networks (Computer science)
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10948/30789 , vital:31131
- Description: The Evolutionary Robotics (ER) process is a technique that applies evolutionary optimization algorithms to the task of automatically developing, or evolving, robotic control programs. These control programs, or simply controllers, are evolved in order to allow a robot to perform a required task. During the ER process, use is often made of robotic simulators to evaluate the performance of candidate controllers that are produced in the course of the controller evolution process. Such simulators accelerate and otherwise simplify the controller evolution process, as opposed to the more arduous process of evaluating controllers in the real world without use of simulation. To date, the vast majority of simulators that have been applied in ER are physics- based models which are constructed by taking into account the underlying physics governing the operation of the robotic system in question. An alternative approach to simulator implementation in ER is the usage of Artificial Neural Networks (ANNs) as simulators in the ER process. Such simulators are referred to as Simulator Neural Networks (SNNs). Previous studies have indicated that SNNs can successfully be used as an alter- native to physics-based simulators in the ER process on various robotic platforms. At the commencement of the current study it was not, however, known how this relatively new method of simulation would compare to traditional physics-based simulation approaches in ER. The study presented in this thesis thus endeavoured to quantitatively compare SNNs and physics-based models as simulators in the ER process. In order to con- duct this comparative study, both SNNs and physics simulators were constructed for the modelling of three different robotic platforms: a differentially-steered robot, a wheeled inverted pendulum robot and a hexapod robot. Each of these two types of simulation was then used in simulation-based evolution processes to evolve con- trollers for each robotic platform. During these controller evolution processes, the SNNs and physics models were compared in terms of their accuracy in making pre- dictions of robotic behaviour, their computational efficiency in arriving at these predictions, the human effort required to construct each simulator and, most im- portantly, the real-world performance of controllers evolved by making use of each simulator. The results obtained in this study illustrated experimentally that SNNs were, in the majority of cases, able to make more accurate predictions than the physics- based models and these SNNs were arguably simpler to construct than the physics simulators. Additionally, SNNs were also shown to be a computationally efficient alternative to physics-based simulators in ER and, again in the majority of cases, these SNNs were able to produce controllers which outperformed those evolved in the physics-based simulators, when these controllers were uploaded to the real-world robots. The results of this thesis thus suggest that SNNs are a viable alternative to more commonly-used physics simulators in ER and further investigation of the potential of this simulation technique appears warranted.
- Full Text:
- Date Issued: 2019
A Comparative Study of Bootstrapping Techniques for Inventory Control
- Authors: Frederick, Lauren
- Date: 2020
- Subjects: Computer bootstrapping -- Inventory control
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/48335 , vital:40849
- Description: Setting correct inventory levels is an important business consideration in order to minimise inventory investment while at the same time ensuring sufficient inventory levels to meet customer demand. Inventory management has a significant impact on both financial and customer service aspects of a business. Selecting appropriate inventory levels requires that products’ lead time demand be accurately estimated in order to calculate the reorder point. The purpose of this study was to empirically determine whether bootstrapping methods used to estimate the lead time demand distribution and reorder point calculation could match or even outperform a standard parametric approach. The two bootstrapping methods compared in this research included variations of those presented by Bookbinder and Lordahl [1989] and do Rego and de Mesquita [2015]. These were compared to the standard parametric approach common in practice which makes use of the Normal distribution for modelling lead time demand. The three reorder point calculation methods were each incorporated into the inventory policy simulations using data supplied by a South African automotive spare parts business. The simulations covered a period of twelve months and were repeated for multiple service levels ranging from 70 to 99 percent. Results of the simulations were compared at a high level as well as for groups of items identified using segmentation techniques which considered different item demand and lead time characteristics. Key findings were that the Normal approximation method was far superior in terms of the service level metric, while the variation of the Bookbinder and Lordahl [1989] method adopted in this study presented possible cost benefits at lower service levels.
- Full Text:
- Date Issued: 2020
- Authors: Frederick, Lauren
- Date: 2020
- Subjects: Computer bootstrapping -- Inventory control
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/48335 , vital:40849
- Description: Setting correct inventory levels is an important business consideration in order to minimise inventory investment while at the same time ensuring sufficient inventory levels to meet customer demand. Inventory management has a significant impact on both financial and customer service aspects of a business. Selecting appropriate inventory levels requires that products’ lead time demand be accurately estimated in order to calculate the reorder point. The purpose of this study was to empirically determine whether bootstrapping methods used to estimate the lead time demand distribution and reorder point calculation could match or even outperform a standard parametric approach. The two bootstrapping methods compared in this research included variations of those presented by Bookbinder and Lordahl [1989] and do Rego and de Mesquita [2015]. These were compared to the standard parametric approach common in practice which makes use of the Normal distribution for modelling lead time demand. The three reorder point calculation methods were each incorporated into the inventory policy simulations using data supplied by a South African automotive spare parts business. The simulations covered a period of twelve months and were repeated for multiple service levels ranging from 70 to 99 percent. Results of the simulations were compared at a high level as well as for groups of items identified using segmentation techniques which considered different item demand and lead time characteristics. Key findings were that the Normal approximation method was far superior in terms of the service level metric, while the variation of the Bookbinder and Lordahl [1989] method adopted in this study presented possible cost benefits at lower service levels.
- Full Text:
- Date Issued: 2020
A comparative study of the comfort related properties of commercial apparel fabrics containing natural and man-made fibres
- Authors: Stoffberg, Marguerite Ester
- Date: 2013
- Subjects: Textile fabrics , Materials -- Thermal properties
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10455 , http://hdl.handle.net/10948/d1020931
- Description: The relationship between the fabric parameters, as independent variables, and the comfort related properties, as dependent variables, of commercial suiting fabrics, containing both natural and man-made fibres, have been studied. The fabric parameters measured in the study were mass, thickness, density, and air permeability. The comfort related properties, tested on a Permetest instrument, included water vapour permeability, water vapour resistance, and thermal resistance, with the moisture permeability index being derived. A total of 26 commercial suiting fabrics, covering a wide range of mass, as well as different fibre types and blends and fabric structures, was tested. The fibres covered, included wool, polyester, viscose, and cotton, while the fabric structures covered were 1x1 plain weave, 2x1 twill and 2x2 twill weave. The objectives of this study were to determine the empirical relationships between the measured fabric properties and the measured comfort related properties, and to determine the role, if any, of fibre type and fabric structure, since many claims are made in practice concerning the relative advantages, in terms of comfort, of a specific fibre type or blend, or fabric structure, over others, some of which being supported by research results. Since the fabrics covered, were commercial and were not engineered so that the different fabric parameters (independent variables) and fibre type and blend, as well as fabric structure could be varied independently of each other, the effects of the various fabric parameters on the fabric comfort related properties were determined and quantified by multiple regression analyses (multi-linear and multi-quadratic), and the best fit regression equations, and contribution of each parameter to the overall fit established. It was found that fabric thickness and fabric mass had the largest effect on the comfort related properties as measured here, fabric mass determining, to a large extent, water vapour permeability, and fabric thickness, thermal resistance. The rest of the fabric parameters included in the study had only a relatively small effect on the measured comfort related properties. The influence of fabric parameters, with particular reference to mass and thickness, on the measured comfort related properties, were much greater than that of fibre type or blend, or fabric structure. It was, therefore, concluded from this study, that the fabric parameters, as opposed to the intrinsic characteristics of a particular fibre, whether natural or man-made, largely determined those fabric comfort related properties measured here.
- Full Text:
- Date Issued: 2013
- Authors: Stoffberg, Marguerite Ester
- Date: 2013
- Subjects: Textile fabrics , Materials -- Thermal properties
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10455 , http://hdl.handle.net/10948/d1020931
- Description: The relationship between the fabric parameters, as independent variables, and the comfort related properties, as dependent variables, of commercial suiting fabrics, containing both natural and man-made fibres, have been studied. The fabric parameters measured in the study were mass, thickness, density, and air permeability. The comfort related properties, tested on a Permetest instrument, included water vapour permeability, water vapour resistance, and thermal resistance, with the moisture permeability index being derived. A total of 26 commercial suiting fabrics, covering a wide range of mass, as well as different fibre types and blends and fabric structures, was tested. The fibres covered, included wool, polyester, viscose, and cotton, while the fabric structures covered were 1x1 plain weave, 2x1 twill and 2x2 twill weave. The objectives of this study were to determine the empirical relationships between the measured fabric properties and the measured comfort related properties, and to determine the role, if any, of fibre type and fabric structure, since many claims are made in practice concerning the relative advantages, in terms of comfort, of a specific fibre type or blend, or fabric structure, over others, some of which being supported by research results. Since the fabrics covered, were commercial and were not engineered so that the different fabric parameters (independent variables) and fibre type and blend, as well as fabric structure could be varied independently of each other, the effects of the various fabric parameters on the fabric comfort related properties were determined and quantified by multiple regression analyses (multi-linear and multi-quadratic), and the best fit regression equations, and contribution of each parameter to the overall fit established. It was found that fabric thickness and fabric mass had the largest effect on the comfort related properties as measured here, fabric mass determining, to a large extent, water vapour permeability, and fabric thickness, thermal resistance. The rest of the fabric parameters included in the study had only a relatively small effect on the measured comfort related properties. The influence of fabric parameters, with particular reference to mass and thickness, on the measured comfort related properties, were much greater than that of fibre type or blend, or fabric structure. It was, therefore, concluded from this study, that the fabric parameters, as opposed to the intrinsic characteristics of a particular fibre, whether natural or man-made, largely determined those fabric comfort related properties measured here.
- Full Text:
- Date Issued: 2013
A comparison between the game and hunting industries in KwaZulu-Natal and the Eastern Cape
- Authors: Kobus, Louann
- Date: 2007
- Subjects: Big game hunting -- South Africa -- KwaZulu-Natal , Big game hunting -- South Africa -- Eastern Cape , Hunting -- South Africa -- KwaZulu-Natal , Hunting -- South Africa -- Eastern Cape , Game farms -- South Africa -- KwaZulu-Natal , Game farms -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10590 , http://hdl.handle.net/10948/534 , http://hdl.handle.net/10948/d1011724 , Big game hunting -- South Africa -- KwaZulu-Natal , Big game hunting -- South Africa -- Eastern Cape , Hunting -- South Africa -- KwaZulu-Natal , Hunting -- South Africa -- Eastern Cape , Game farms -- South Africa -- KwaZulu-Natal , Game farms -- South Africa -- Eastern Cape
- Description: The objectives of this research, were to investigate the characteristics and develop a profile of the game and hunting industries of KwaZulu-Natal, and to undertake a comparison between the game and hunting industries in KwaZulu-Natal and the Eastern Cape. The comparative part of this study was completed using results obtained from a study done in 2002 in the Eastern Cape (van Niekerk, 2002). The main farming activities in KwaZulu-Natal are large livestock production and sugar cane production. In recent years, private landowners in KwaZulu-Natal have undergone a transition from livestock production to game ranching due to the problems faced and the cost implications of the HIV epidemic, stock theft, difficulties faced with changes in the labour laws and the increasing number of land claims against farmers. Although the game and hunting industries are relatively young industries in KwaZulu-Natal they contribute significantly to the economy of the province. Not only is greater conservation of the biodiversity more effective in game ranching but it is also proving to yield great economic returns. The increase in game ranching in recent years is namely due to the monetary value placed on wildlife, the increased value in ecotourism and its value as an earner of foreign exchange, less dependency on unskilled labour than that of livestock farming and lower rates of animal loss through theft compared to that of livestock farming. In KwaZulu-Natal game numbers indicate that impala have the greatest population amongst the respondents, followed by nyala, blesbok, common reedbuck, kudu and blue wildebeest, whilst other game species occur in smaller numbers. Respondents in KwaZulu-Natal indicate that nyala is the largest economic earner for them followed by buffalo, whereas in the Eastern Cape (2002), kudu and springbok provide the greatest income for the province. In KwaZulu-Natal income generated from hunting is second to that of live game sales compared to the Eastern Cape (2002) where hunting is the most important form of game utilisation in terms of income generated. At the time of this study, respondents in KwaZulu-Natal reported an income of R 15 382 397 generated from live sales and R 13 561 459 from hunting. These respondents also indicated that the total value of game utilised annually was in excess of R 30 million. Although game utilisation is occurring on a sustainable basis, there is room for greater utilisation of some game species which, if undertaken correctly, can increase the revenue for the province significantly and also contribute positively to further sustainability of the game populations. KwaZulu-Natal’s competitive advantage is derived from the fact that there is an abundance of game on the ranches, quality trophy animals are available, the number of game species available for hunting and quality of service rendered to hunters by the professional hunters and ranch owners. This study has clearly shown that there is a need for further investigation into the game and hunting industries in KwaZulu-Natal.
- Full Text:
- Date Issued: 2007
- Authors: Kobus, Louann
- Date: 2007
- Subjects: Big game hunting -- South Africa -- KwaZulu-Natal , Big game hunting -- South Africa -- Eastern Cape , Hunting -- South Africa -- KwaZulu-Natal , Hunting -- South Africa -- Eastern Cape , Game farms -- South Africa -- KwaZulu-Natal , Game farms -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10590 , http://hdl.handle.net/10948/534 , http://hdl.handle.net/10948/d1011724 , Big game hunting -- South Africa -- KwaZulu-Natal , Big game hunting -- South Africa -- Eastern Cape , Hunting -- South Africa -- KwaZulu-Natal , Hunting -- South Africa -- Eastern Cape , Game farms -- South Africa -- KwaZulu-Natal , Game farms -- South Africa -- Eastern Cape
- Description: The objectives of this research, were to investigate the characteristics and develop a profile of the game and hunting industries of KwaZulu-Natal, and to undertake a comparison between the game and hunting industries in KwaZulu-Natal and the Eastern Cape. The comparative part of this study was completed using results obtained from a study done in 2002 in the Eastern Cape (van Niekerk, 2002). The main farming activities in KwaZulu-Natal are large livestock production and sugar cane production. In recent years, private landowners in KwaZulu-Natal have undergone a transition from livestock production to game ranching due to the problems faced and the cost implications of the HIV epidemic, stock theft, difficulties faced with changes in the labour laws and the increasing number of land claims against farmers. Although the game and hunting industries are relatively young industries in KwaZulu-Natal they contribute significantly to the economy of the province. Not only is greater conservation of the biodiversity more effective in game ranching but it is also proving to yield great economic returns. The increase in game ranching in recent years is namely due to the monetary value placed on wildlife, the increased value in ecotourism and its value as an earner of foreign exchange, less dependency on unskilled labour than that of livestock farming and lower rates of animal loss through theft compared to that of livestock farming. In KwaZulu-Natal game numbers indicate that impala have the greatest population amongst the respondents, followed by nyala, blesbok, common reedbuck, kudu and blue wildebeest, whilst other game species occur in smaller numbers. Respondents in KwaZulu-Natal indicate that nyala is the largest economic earner for them followed by buffalo, whereas in the Eastern Cape (2002), kudu and springbok provide the greatest income for the province. In KwaZulu-Natal income generated from hunting is second to that of live game sales compared to the Eastern Cape (2002) where hunting is the most important form of game utilisation in terms of income generated. At the time of this study, respondents in KwaZulu-Natal reported an income of R 15 382 397 generated from live sales and R 13 561 459 from hunting. These respondents also indicated that the total value of game utilised annually was in excess of R 30 million. Although game utilisation is occurring on a sustainable basis, there is room for greater utilisation of some game species which, if undertaken correctly, can increase the revenue for the province significantly and also contribute positively to further sustainability of the game populations. KwaZulu-Natal’s competitive advantage is derived from the fact that there is an abundance of game on the ranches, quality trophy animals are available, the number of game species available for hunting and quality of service rendered to hunters by the professional hunters and ranch owners. This study has clearly shown that there is a need for further investigation into the game and hunting industries in KwaZulu-Natal.
- Full Text:
- Date Issued: 2007
A comparison framework for server virtualisation systems a case study
- Authors: Van Tonder, Martin Stephen
- Date: 2006
- Subjects: Virtual computer systems -- South Africa Case studies , Virtual storage (Computer science) -- South Africa Case studies
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10481 , http://hdl.handle.net/10948/439 , http://hdl.handle.net/10948/d1012009 , Virtual computer systems -- South Africa Case studies , Virtual storage (Computer science) -- South Africa Case studies
- Description: Recent years have seen a revival of interest in virtualisation research. Although this term has been used to refer to various systems, the focus of this research is on systems which partition a single physical server into multiple virtual servers. It is difficult for researchers and practitioners to get a clear picture of the state of the art in server virtualisation. This is due in part to the large number of systems available. Another reason is that information about virtualisation systems lacks structure, and is dispersed among multiple sources. Practitioners, such as data centre managers and systems administrators, may be familiar with virtualisation systems from a specific vendor, but generally lack a broader view of the field. This makes it difficult to make informed decisions when selecting these systems. Researchers and vendors who are developing virtualisation systems also lack a standard framework for identifying the strengths and weaknesses of their systems, compared to competing systems. It is also time-consuming for researchers who are new to the field to learn about current virtualisation systems. The purpose of this research was to develop a framework to solve these problems. The objectives of the research correspond to the applications of the framework. These include conducting comparative evaluations of server virtualisation systems, identifying strengths and weaknesses of particular virtualisation systems, specifying virtualisation system requirements to facilitate system selection, and gathering information about current virtualisation systems in a structured form. These four objectives were satisfied. The design of this framework was also guided by six framework design principles. These principles, or secondary objectives, were also met. The framework was developed based on an extensive literature study of data centres, virtualisation and current virtualisation systems. Criteria were selected through an inductive process. The feasibility of conducting evaluations using the framework was demonstrated by means of literature-based evaluations, and a practical case study. The use of the framework to facilitate virtualisation system selection was also demonstrated by means of a case study featuring the NMMU Telkom CoE data centre. This framework has a number of practical applications, ranging from the facilitation of decision-making to identifying areas for improvement in current virtualisation systems. The information resulting from evaluations using the framework is also a valuable resource for researchers who are new to the field. The literature study which forms the theoretical foundation of this work is particularly useful in this regard. A future extension to this work would be to develop a decision support system based on the framework. Another possibility is to make the framework, and evaluations, available on-line as a resource for data center managers, vendors and researchers. This would also enable other researchers to provide additional feedback, enabling the framework to be further refined
- Full Text:
- Date Issued: 2006
- Authors: Van Tonder, Martin Stephen
- Date: 2006
- Subjects: Virtual computer systems -- South Africa Case studies , Virtual storage (Computer science) -- South Africa Case studies
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10481 , http://hdl.handle.net/10948/439 , http://hdl.handle.net/10948/d1012009 , Virtual computer systems -- South Africa Case studies , Virtual storage (Computer science) -- South Africa Case studies
- Description: Recent years have seen a revival of interest in virtualisation research. Although this term has been used to refer to various systems, the focus of this research is on systems which partition a single physical server into multiple virtual servers. It is difficult for researchers and practitioners to get a clear picture of the state of the art in server virtualisation. This is due in part to the large number of systems available. Another reason is that information about virtualisation systems lacks structure, and is dispersed among multiple sources. Practitioners, such as data centre managers and systems administrators, may be familiar with virtualisation systems from a specific vendor, but generally lack a broader view of the field. This makes it difficult to make informed decisions when selecting these systems. Researchers and vendors who are developing virtualisation systems also lack a standard framework for identifying the strengths and weaknesses of their systems, compared to competing systems. It is also time-consuming for researchers who are new to the field to learn about current virtualisation systems. The purpose of this research was to develop a framework to solve these problems. The objectives of the research correspond to the applications of the framework. These include conducting comparative evaluations of server virtualisation systems, identifying strengths and weaknesses of particular virtualisation systems, specifying virtualisation system requirements to facilitate system selection, and gathering information about current virtualisation systems in a structured form. These four objectives were satisfied. The design of this framework was also guided by six framework design principles. These principles, or secondary objectives, were also met. The framework was developed based on an extensive literature study of data centres, virtualisation and current virtualisation systems. Criteria were selected through an inductive process. The feasibility of conducting evaluations using the framework was demonstrated by means of literature-based evaluations, and a practical case study. The use of the framework to facilitate virtualisation system selection was also demonstrated by means of a case study featuring the NMMU Telkom CoE data centre. This framework has a number of practical applications, ranging from the facilitation of decision-making to identifying areas for improvement in current virtualisation systems. The information resulting from evaluations using the framework is also a valuable resource for researchers who are new to the field. The literature study which forms the theoretical foundation of this work is particularly useful in this regard. A future extension to this work would be to develop a decision support system based on the framework. Another possibility is to make the framework, and evaluations, available on-line as a resource for data center managers, vendors and researchers. This would also enable other researchers to provide additional feedback, enabling the framework to be further refined
- Full Text:
- Date Issued: 2006
A comparison of conventional and ultrasonic seams in swimwear
- Authors: Tyalana, Nommiselo
- Date: 2018
- Subjects: Textile finishing , Textile finishing agents Seams (Sewing) Textile fabrics Textile fibers Textile design
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/36727 , vital:34048
- Description: Ultrasonic welding technology is a relatively new technology in apparel construction, this research forms part of a study to assess its effectiveness as a joining technology that can be used in ladies swimwear. The ultimate aim was to determine whether the ultrasonic welding joining technique could be successfully used in assembling ladies swimwear garments, comprising only synthetic fibres, namely polyester/Lycra, polyamide/Lycra, polyamide/Lycra power-net and polyamide/Lycra mesh warp knitted fabrics. These specific swimwear fabrics were selected since they comprise 100% thermoplastic synthetic fibres, considered ideal for ultrasonic welding. This study essentially compares and contrasts the performance of two seam joining techniques: namely conventional sewing and ultrasonic welding, in terms of seam strength, when used in the above mentioned four fabrics. Conventionally sewn and ultrasonically welded seams were produced, straight and curved, in both the wale and course directions of the fabrics. The conventionally sewn seams were produced using two sewing machines; namely an overlocker, also known as a mock safety sewing machine, and a cover seam machines. All conventionally sewn seams were stitched and tested under similar conditions. The ultrasonic welded seams were produced using three different wheels, a Medium Male Knurled pattern wheel, a Staggered Triple Stitch pattern wheel and a Single Stitch pattern wheel. The amplitude and speed of the welding machine, during the ultrasonic seaming, were kept constant, except when welding the polyamide/Lycra power-net and the polyamide/Lycra mesh fabrics when the pressure had to be drastically reduced in order to avoid excessively softened seams. The results of the study are presented in the form of line charts, scatter charts and tables. The ultrasonic welded seams, joined with the Medium Male Knurled wheel, exhibited surface waviness, as opposed to those joined with the Staggered Triple Stitch wheel which were smooth. It was found that, in terms of seam strength, the ultrasonic seams produced with the Single Stitch and Medium Male Knurled pattern wheels out performed those produced with the Staggered Triple Stitch wheels. The polyester/Lycra fabric was found easier to handle during the ultrasonic seaming process than the polyamide/Lycra fabric, although the strength of the ultrasonic seams in the polyester/Lycra fabric did not differ consistently from those of the polyamide/Lycra fabric. It was found that the conventional sewn seams were consistently stronger, and had a better appearance, than the ultrasonic welded seams. Although some promising results were obtained, in terms of the strength of the ultrasonic welded seams, the results overall were far too variable, inconsistent and unsatisfactory for this technique of seaming to be recommended at this stage for any of the swimwear fabrics covered. Further, more in depth, studies are required in order to gain a better understating of the effect of the various ultrasonic seaming parameters, as well as fabric parameters on ultrasonic seam strength and consistency.
- Full Text:
- Date Issued: 2018
- Authors: Tyalana, Nommiselo
- Date: 2018
- Subjects: Textile finishing , Textile finishing agents Seams (Sewing) Textile fabrics Textile fibers Textile design
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/36727 , vital:34048
- Description: Ultrasonic welding technology is a relatively new technology in apparel construction, this research forms part of a study to assess its effectiveness as a joining technology that can be used in ladies swimwear. The ultimate aim was to determine whether the ultrasonic welding joining technique could be successfully used in assembling ladies swimwear garments, comprising only synthetic fibres, namely polyester/Lycra, polyamide/Lycra, polyamide/Lycra power-net and polyamide/Lycra mesh warp knitted fabrics. These specific swimwear fabrics were selected since they comprise 100% thermoplastic synthetic fibres, considered ideal for ultrasonic welding. This study essentially compares and contrasts the performance of two seam joining techniques: namely conventional sewing and ultrasonic welding, in terms of seam strength, when used in the above mentioned four fabrics. Conventionally sewn and ultrasonically welded seams were produced, straight and curved, in both the wale and course directions of the fabrics. The conventionally sewn seams were produced using two sewing machines; namely an overlocker, also known as a mock safety sewing machine, and a cover seam machines. All conventionally sewn seams were stitched and tested under similar conditions. The ultrasonic welded seams were produced using three different wheels, a Medium Male Knurled pattern wheel, a Staggered Triple Stitch pattern wheel and a Single Stitch pattern wheel. The amplitude and speed of the welding machine, during the ultrasonic seaming, were kept constant, except when welding the polyamide/Lycra power-net and the polyamide/Lycra mesh fabrics when the pressure had to be drastically reduced in order to avoid excessively softened seams. The results of the study are presented in the form of line charts, scatter charts and tables. The ultrasonic welded seams, joined with the Medium Male Knurled wheel, exhibited surface waviness, as opposed to those joined with the Staggered Triple Stitch wheel which were smooth. It was found that, in terms of seam strength, the ultrasonic seams produced with the Single Stitch and Medium Male Knurled pattern wheels out performed those produced with the Staggered Triple Stitch wheels. The polyester/Lycra fabric was found easier to handle during the ultrasonic seaming process than the polyamide/Lycra fabric, although the strength of the ultrasonic seams in the polyester/Lycra fabric did not differ consistently from those of the polyamide/Lycra fabric. It was found that the conventional sewn seams were consistently stronger, and had a better appearance, than the ultrasonic welded seams. Although some promising results were obtained, in terms of the strength of the ultrasonic welded seams, the results overall were far too variable, inconsistent and unsatisfactory for this technique of seaming to be recommended at this stage for any of the swimwear fabrics covered. Further, more in depth, studies are required in order to gain a better understating of the effect of the various ultrasonic seaming parameters, as well as fabric parameters on ultrasonic seam strength and consistency.
- Full Text:
- Date Issued: 2018
A comparison of different strategies to control pests and diseases in Brassica spp. production in the Western Cape
- Van Niekerk, Abraham Johannes
- Authors: Van Niekerk, Abraham Johannes
- Date: 2019
- Subjects: Pesticides , Pests -- Control Agricultural pests , Plant diseases
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/44122 , vital:37113
- Description: Brassica spp. are cultivated all over the world, commercial species include: cabbage, broccoli, kale, kohlrabi and turnip. In this study the focus was on broccoli (Brassica oleracea) production in the Western Cape province of South Africa and its economically important pests and diseases: sugar beet cyst nematode (Heterodera schachtii), diamondback moth (Plutella xylostella), white blister (Albugo candida) and clubroot (Plasmodiophora brassicae), and the different methods to control these pests and diseases. The control methods focused on in this study included a commercial chemical control programme, a biological control programme and a holistic approach. Other factors were bio-fumigation and chemical fumigation and different crop rotation practices including rotation crops versus no rotation crops. The experimental design was a strip split plot design, with different pest and disease management strategies as the main plot treatment and fumigation and rotation treatment combinations arranged in strips across the main plot treatments. The main plot design was a randomized complete block with four programmes (Control, Holistic, Chemical and Biological) replicated four times and laid out in a Randomised Complete Block Design (RCBD). The treatment design of the strip plot factors was a 2x2 factorial with two fumigations (fumigated chemically and fumigated biologically) and two rotations (crop rotated and monoculture) randomly allocated across main plot treatments. Each experimental unit consisted of 40 plants. Plants were evaluated weekly for the incidence of white blister and diamondback moth. Incidences of clubroot and white blister infection of heads of broccoli were recorded 78 days after planting. Baseline soil samples were analysed to establish the soil chemical properties. Post-trial soil samples were also analysed to investigate the effect of the different practices and programmes on the soil chemical properties. Nematodes were extracted pre-trial and post-trial, and the effect of fumigation and crop rotation on plant parasitic nematodes and the nematode population diversity investigated. In the post-trial soil chemical analysis, a significantly higher concentration of Na was recorded for the biological programme when crop rotation was included compared to the no rotation treatment. The concentration of K was also significantly higher in the no rotation compared to the rotation treatment. The nematode results showed very high numbers of bacterial feeders in all the samples. Overall nematode diversity was lacking and showed very few fungal feeders, omnivores and predators. The nematode indices for all of the samples showed that nematodes were highly enriched and unstructured. Of the plant parasitic nematodes, only Heterodera spp. were obtained in the pre-trial analysis, and incidences of these nematodes were lower at the end of the trial. Low numbers of other plant parasitic nematodes viz. Pratylenchus, Paratrichodorus and Tylenchorhynchus were reported for the post-trial analysis of the soil. Because of the low numbers of plant parasitic nematodes, it was not possible to analyse the data statistically. With regard to diamondback moth and the fungal diseases, crop rotation and fumigation did not significantly affect the incidence of white blister and diamondback moth. A significant “days after planting by control programme” interaction was reported for the incidence of white blister on foliage and the incidence of diamondback moth. All three control programmes significantly reduced the incidence of diamondback moth with the chemical programme being significantly more effective than the other two programmes. All three programmes also significantly reduced the incidence of white blister on foliage and the holistic and biological programmes significantly reduced the incidence of white blister on broccoli heads with the holistic programme being significantly more effective than the biological programme. There was no clubroot infection in the trial for any of the treatments. Results of this study showed that it is possible to manage diseases and pests of broccoli using a holistic approach. However, long term trials are needed to confirm the results obtained in this study.
- Full Text:
- Date Issued: 2019
- Authors: Van Niekerk, Abraham Johannes
- Date: 2019
- Subjects: Pesticides , Pests -- Control Agricultural pests , Plant diseases
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/44122 , vital:37113
- Description: Brassica spp. are cultivated all over the world, commercial species include: cabbage, broccoli, kale, kohlrabi and turnip. In this study the focus was on broccoli (Brassica oleracea) production in the Western Cape province of South Africa and its economically important pests and diseases: sugar beet cyst nematode (Heterodera schachtii), diamondback moth (Plutella xylostella), white blister (Albugo candida) and clubroot (Plasmodiophora brassicae), and the different methods to control these pests and diseases. The control methods focused on in this study included a commercial chemical control programme, a biological control programme and a holistic approach. Other factors were bio-fumigation and chemical fumigation and different crop rotation practices including rotation crops versus no rotation crops. The experimental design was a strip split plot design, with different pest and disease management strategies as the main plot treatment and fumigation and rotation treatment combinations arranged in strips across the main plot treatments. The main plot design was a randomized complete block with four programmes (Control, Holistic, Chemical and Biological) replicated four times and laid out in a Randomised Complete Block Design (RCBD). The treatment design of the strip plot factors was a 2x2 factorial with two fumigations (fumigated chemically and fumigated biologically) and two rotations (crop rotated and monoculture) randomly allocated across main plot treatments. Each experimental unit consisted of 40 plants. Plants were evaluated weekly for the incidence of white blister and diamondback moth. Incidences of clubroot and white blister infection of heads of broccoli were recorded 78 days after planting. Baseline soil samples were analysed to establish the soil chemical properties. Post-trial soil samples were also analysed to investigate the effect of the different practices and programmes on the soil chemical properties. Nematodes were extracted pre-trial and post-trial, and the effect of fumigation and crop rotation on plant parasitic nematodes and the nematode population diversity investigated. In the post-trial soil chemical analysis, a significantly higher concentration of Na was recorded for the biological programme when crop rotation was included compared to the no rotation treatment. The concentration of K was also significantly higher in the no rotation compared to the rotation treatment. The nematode results showed very high numbers of bacterial feeders in all the samples. Overall nematode diversity was lacking and showed very few fungal feeders, omnivores and predators. The nematode indices for all of the samples showed that nematodes were highly enriched and unstructured. Of the plant parasitic nematodes, only Heterodera spp. were obtained in the pre-trial analysis, and incidences of these nematodes were lower at the end of the trial. Low numbers of other plant parasitic nematodes viz. Pratylenchus, Paratrichodorus and Tylenchorhynchus were reported for the post-trial analysis of the soil. Because of the low numbers of plant parasitic nematodes, it was not possible to analyse the data statistically. With regard to diamondback moth and the fungal diseases, crop rotation and fumigation did not significantly affect the incidence of white blister and diamondback moth. A significant “days after planting by control programme” interaction was reported for the incidence of white blister on foliage and the incidence of diamondback moth. All three control programmes significantly reduced the incidence of diamondback moth with the chemical programme being significantly more effective than the other two programmes. All three programmes also significantly reduced the incidence of white blister on foliage and the holistic and biological programmes significantly reduced the incidence of white blister on broccoli heads with the holistic programme being significantly more effective than the biological programme. There was no clubroot infection in the trial for any of the treatments. Results of this study showed that it is possible to manage diseases and pests of broccoli using a holistic approach. However, long term trials are needed to confirm the results obtained in this study.
- Full Text:
- Date Issued: 2019
A comparison of harvester productivity and stump volume waste in coppiced and planted eucalyptus grandis pulpwood compartments in the KwaZulu-Natal forestry region of South Africa
- Ramantswana, Mufhumudzi Muedanyi
- Authors: Ramantswana, Mufhumudzi Muedanyi
- Date: 2012
- Subjects: Forest productivity , Forest management
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10744 , http://hdl.handle.net/10948/d1019844
- Description: Over the past decade the South African forestry industry has gradually experienced the ramifications of labour scarcity, increases in labour costs, the effect of HIV and AIDS and increasing timber demand. Consequently, this has led to an increase in the mechanisation rate, especially in timber harvesting operations. Due to the labour challenges in South Africa, mechanised forestry equipment has increasingly been required to operate in complex forest conditions, such as coppiced compartments, where they have not operated before. It therefore occurs that harvesters are either used in certain coppiced compartments with uncertain productivity expectations, or the harvesters are not used in these compartments due to a lack of productivity knowledge. The influence that certain factors have on harvester productivity and stump volume loss – factors such as coppice regeneration practices and stem form – is poorly understood and has not been quantified. No scientific research exists regarding the effects of coppice compartments on the productivity of a harvester and the amount of stump volume waste. This research aimed at determining the influence of tree volume, tree form, stem felled first and distance between stems on the productivity of an excavator based harvester in coppiced double, coppiced single and planted Eucalyptus grandis pulpwood compartments. Furthermore, the research determined whether there was any stump volume waste, and quantified how much of it was due to excessive stump heights by the harvester. Through regression analysis, productivity equations were derived to make productivity predictions in both coppiced and planted compartments. All stumps were evaluated for waste and the average stump volume waste in coppiced double, coppiced single and planted trees was determined. The research results showed that planted trees had the highest productivity across all tree sizes, followed by coppiced single trees and then coppiced double stems. When harvesting a 0.2 m3 tree, the mean harvester productivity was 8.7 m3 per PMH in coppiced double trees, 13.8 m3 per PMH in coppiced single trees and 16.1 m3 per PMH in planted trees. In coppiced double stems the productivity was not significantly influence by the distance between stems. However, the productivity was significantly influenced by the stem felled first. The regression results showed that if the smaller stem was felled first, the productivity would increase if the larger stem’s volume was less than 0.18 m3; however where the larger stem was greater than 0.18 m3, the relationship was reversed. In addition, the productivity for both coppiced single trees and coppiced double stems were significantly influenced by stem form. The poorly formed trees had low productivity compared to the trees with good form. The stump volume findings showed that coppiced double stems had the highest average stump volume waste per stump, with 0.00307 m3 waste, followed by coppiced single trees (0.001954 m3) and planted trees (0.001650 m3). The average stump volume waste per stump with waste for the planted trees was negligible. This research provides forestry companies and harvesting contractors with information on the effect of tree volume, tree form and stem felled first on harvester productivity in E. grandis coppiced double, coppiced single and planted compartments. This information will assist in making equipment and system selection decisions and improve operational management and control. In addition, they will also be aware of stump volume losses that will occur in the three scenarios.
- Full Text:
- Date Issued: 2012
- Authors: Ramantswana, Mufhumudzi Muedanyi
- Date: 2012
- Subjects: Forest productivity , Forest management
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10744 , http://hdl.handle.net/10948/d1019844
- Description: Over the past decade the South African forestry industry has gradually experienced the ramifications of labour scarcity, increases in labour costs, the effect of HIV and AIDS and increasing timber demand. Consequently, this has led to an increase in the mechanisation rate, especially in timber harvesting operations. Due to the labour challenges in South Africa, mechanised forestry equipment has increasingly been required to operate in complex forest conditions, such as coppiced compartments, where they have not operated before. It therefore occurs that harvesters are either used in certain coppiced compartments with uncertain productivity expectations, or the harvesters are not used in these compartments due to a lack of productivity knowledge. The influence that certain factors have on harvester productivity and stump volume loss – factors such as coppice regeneration practices and stem form – is poorly understood and has not been quantified. No scientific research exists regarding the effects of coppice compartments on the productivity of a harvester and the amount of stump volume waste. This research aimed at determining the influence of tree volume, tree form, stem felled first and distance between stems on the productivity of an excavator based harvester in coppiced double, coppiced single and planted Eucalyptus grandis pulpwood compartments. Furthermore, the research determined whether there was any stump volume waste, and quantified how much of it was due to excessive stump heights by the harvester. Through regression analysis, productivity equations were derived to make productivity predictions in both coppiced and planted compartments. All stumps were evaluated for waste and the average stump volume waste in coppiced double, coppiced single and planted trees was determined. The research results showed that planted trees had the highest productivity across all tree sizes, followed by coppiced single trees and then coppiced double stems. When harvesting a 0.2 m3 tree, the mean harvester productivity was 8.7 m3 per PMH in coppiced double trees, 13.8 m3 per PMH in coppiced single trees and 16.1 m3 per PMH in planted trees. In coppiced double stems the productivity was not significantly influence by the distance between stems. However, the productivity was significantly influenced by the stem felled first. The regression results showed that if the smaller stem was felled first, the productivity would increase if the larger stem’s volume was less than 0.18 m3; however where the larger stem was greater than 0.18 m3, the relationship was reversed. In addition, the productivity for both coppiced single trees and coppiced double stems were significantly influenced by stem form. The poorly formed trees had low productivity compared to the trees with good form. The stump volume findings showed that coppiced double stems had the highest average stump volume waste per stump, with 0.00307 m3 waste, followed by coppiced single trees (0.001954 m3) and planted trees (0.001650 m3). The average stump volume waste per stump with waste for the planted trees was negligible. This research provides forestry companies and harvesting contractors with information on the effect of tree volume, tree form and stem felled first on harvester productivity in E. grandis coppiced double, coppiced single and planted compartments. This information will assist in making equipment and system selection decisions and improve operational management and control. In addition, they will also be aware of stump volume losses that will occur in the three scenarios.
- Full Text:
- Date Issued: 2012
A comparison of programming notations for a tertiary level introductory programming course
- Authors: Cilliers, Charmain Barbara
- Date: 2004
- Subjects: Computer programming -- Study and teaching (Higher) -- South Africa , Computer programmers -- South Africa
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:11093 , http://hdl.handle.net/10948/d1019679
- Description: Increasing pressure from national government to improve throughput at South African tertiary education institutions presents challenges to educators of introductory programming courses. In response, educators must adopt effective methods and strategies that encourage novice programmers to be successful in such courses. An approach that seeks to increase and maintain satisfactory throughput is the modification of the teaching model in these courses by adjusting presentation techniques. This thesis investigates the effect of integrating an experimental iconic programming notation and associated development environment with existing conventional textual technological support in the teaching model of a tertiary level introductory programming course. The investigation compares the performance achievement of novice programmers using only conventional textual technological support with that of novice programmers using the integrated iconic and conventional textual technological support. In preparation for the investigation, interpretation of existing knowledge on the behaviour of novice programmers while learning to program results in a novel framework of eight novice programmer requirements for technological support in an introductory programming course. This framework is applied in the examination of existing categories of technological support as well as in the design of new technological support for novice programmers learning to program. It thus provides information for the selection of existing and the design of new introductory programming technological support. The findings of the investigation suggest strong evidence that performance achievement of novice programmers in a tertiary level introductory programming course improves significantly with the inclusion of iconic technological support in the teaching model. The benefits are particularly evident in the portion of the novice programmer population who have been identified as being at risk of being successful in the course. Novice programmers identified as being at risk perform substantially better when using iconic technological support concurrently with conventional textual technological support than their equals who use only the latter form. Considerably more at risk novice programmers using the integrated form of technological support are in fact successful in the introductory programming course when compared with their counterparts who use conventional textual technological support only. The contributions of this thesis address deficiencies existing in current documented research. These contributions are primarily apparent in a number of distinct areas, namely: • formalisation of a novel framework of novice programmer requirements for technological support in an introductory programming course; • application of the framework as a formal evaluation technique; • application of the framework in the design of a visual iconic programming notation and development environment; • enhancement of existing empirical evidence and experimental research methodology typically applied to studies in programming; as well as • a proposal for a modified introductory programming course teaching model. The thesis has effectively applied substantial existing research on the cognitive model of the novice programmer as well as that on experimental technological support. The increase of throughput to a recommended rate of 75 percent in the tertiary level introductory programming course at the University of Port Elizabeth is attributed solely to the incorporation of iconic technological support in the teaching model of the course.
- Full Text:
- Date Issued: 2004
- Authors: Cilliers, Charmain Barbara
- Date: 2004
- Subjects: Computer programming -- Study and teaching (Higher) -- South Africa , Computer programmers -- South Africa
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:11093 , http://hdl.handle.net/10948/d1019679
- Description: Increasing pressure from national government to improve throughput at South African tertiary education institutions presents challenges to educators of introductory programming courses. In response, educators must adopt effective methods and strategies that encourage novice programmers to be successful in such courses. An approach that seeks to increase and maintain satisfactory throughput is the modification of the teaching model in these courses by adjusting presentation techniques. This thesis investigates the effect of integrating an experimental iconic programming notation and associated development environment with existing conventional textual technological support in the teaching model of a tertiary level introductory programming course. The investigation compares the performance achievement of novice programmers using only conventional textual technological support with that of novice programmers using the integrated iconic and conventional textual technological support. In preparation for the investigation, interpretation of existing knowledge on the behaviour of novice programmers while learning to program results in a novel framework of eight novice programmer requirements for technological support in an introductory programming course. This framework is applied in the examination of existing categories of technological support as well as in the design of new technological support for novice programmers learning to program. It thus provides information for the selection of existing and the design of new introductory programming technological support. The findings of the investigation suggest strong evidence that performance achievement of novice programmers in a tertiary level introductory programming course improves significantly with the inclusion of iconic technological support in the teaching model. The benefits are particularly evident in the portion of the novice programmer population who have been identified as being at risk of being successful in the course. Novice programmers identified as being at risk perform substantially better when using iconic technological support concurrently with conventional textual technological support than their equals who use only the latter form. Considerably more at risk novice programmers using the integrated form of technological support are in fact successful in the introductory programming course when compared with their counterparts who use conventional textual technological support only. The contributions of this thesis address deficiencies existing in current documented research. These contributions are primarily apparent in a number of distinct areas, namely: • formalisation of a novel framework of novice programmer requirements for technological support in an introductory programming course; • application of the framework as a formal evaluation technique; • application of the framework in the design of a visual iconic programming notation and development environment; • enhancement of existing empirical evidence and experimental research methodology typically applied to studies in programming; as well as • a proposal for a modified introductory programming course teaching model. The thesis has effectively applied substantial existing research on the cognitive model of the novice programmer as well as that on experimental technological support. The increase of throughput to a recommended rate of 75 percent in the tertiary level introductory programming course at the University of Port Elizabeth is attributed solely to the incorporation of iconic technological support in the teaching model of the course.
- Full Text:
- Date Issued: 2004