Nonlinear optical properties of metal free thio alkyl and tert-butyl phenoxy phthalocyanine
- Authors: Joseph, Otto
- Date: 2021-10
- Subjects: Nonlinear optics , Phthalocyanines , Time-dependent density functional theory , Magnetic circular dichroism , Reverse saturable absorption (RSA) , Real Time Dependent Density Functional Theory (RT-TDDFT)
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/190712 , vital:45021
- Description: This work reports on the nonlinear optical properties of tetra - and octa substituted phthalocyanines (Pcs) utilising pentane thiol and 4-tertbutyl phenol as substituents. Their nonlinear absorption coefficient (𝛽) and absorption cross sections were determined using the Z-scan technique with a 10 ns pulse laser at 532 nm. The molecular second order hyperpolarizability Im[γ] was observed and the following Im[γ] trend was obtained for 𝛼-H2Pc(SC5H11)4 isomers, 5.93 ×10−31 (Cs) 2.24×10−32(D2h) > 1.21×10−32(C4h) > 1.05×10−32 (C2v) esu, respectively, in chloroform. Symmetry was seen to have an effect on the observed reverse saturable absorption (RSA) response. Based on the five level model rate equation nonlinear fit of the RSA response curves and Real Time Time Dependant Density Functional Theory (RT-TDDFT) results, the singlet excited state population dynamics was found to play a significant role in producing the observed Im[γ] trend. , Thesis (MSc) -- Faculty of Science, Chemistry, 2021
- Full Text:
- Date Issued: 2021-10
- Authors: Joseph, Otto
- Date: 2021-10
- Subjects: Nonlinear optics , Phthalocyanines , Time-dependent density functional theory , Magnetic circular dichroism , Reverse saturable absorption (RSA) , Real Time Dependent Density Functional Theory (RT-TDDFT)
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/190712 , vital:45021
- Description: This work reports on the nonlinear optical properties of tetra - and octa substituted phthalocyanines (Pcs) utilising pentane thiol and 4-tertbutyl phenol as substituents. Their nonlinear absorption coefficient (𝛽) and absorption cross sections were determined using the Z-scan technique with a 10 ns pulse laser at 532 nm. The molecular second order hyperpolarizability Im[γ] was observed and the following Im[γ] trend was obtained for 𝛼-H2Pc(SC5H11)4 isomers, 5.93 ×10−31 (Cs) 2.24×10−32(D2h) > 1.21×10−32(C4h) > 1.05×10−32 (C2v) esu, respectively, in chloroform. Symmetry was seen to have an effect on the observed reverse saturable absorption (RSA) response. Based on the five level model rate equation nonlinear fit of the RSA response curves and Real Time Time Dependant Density Functional Theory (RT-TDDFT) results, the singlet excited state population dynamics was found to play a significant role in producing the observed Im[γ] trend. , Thesis (MSc) -- Faculty of Science, Chemistry, 2021
- Full Text:
- Date Issued: 2021-10
Electrocatalytic activity of symmetric and asymmetric Co(II) and Mn(III) porphyrins in the presence of graphene quantum dots towards the oxidation of hydrazine
- Authors: Jokazi, Mbulelo
- Date: 2022-10-14
- Subjects: Electrocatalysis , Hydrazine , Quantum dots , Graphene , Porphyrins
- Language: English
- Type: Academic theses , Master's theses , text
- Identifier: http://hdl.handle.net/10962/362894 , vital:65372
- Description: The influence of metal porphyrins in electro-oxidation of hydrazine is explored. A series of symmetric and asymmetric porphyrins alone and in the presence of graphene quantum dots (GQDs) are employed in this work. Tetra 4-aminophenyl porphyrin, manganese tetra 4-aminophenyl porphyrin, manganese tetra 4-aminophenyl porphyrin--GQDs, and manganese tetra 4-aminophenyl porphyrin@GQDs are the symmetric porphyrins. The asymmetric porphyrin and composites are 5, 10, 15-tris(aminophenyl)-20-(4-carboxyphenyl) porphyrins, manganese 5, 10, 15-tris(aminophenyl)-20-(4-carboxyphenyl) porphyrins, cobalt 5, 10, 15-tris(aminophenyl)-20-(4-carboxyphenyl) porphyrins, manganese 5, 10, 15-tris(aminophenyl)-20-(4-carboxyphenyl) porphyrins--GQDs, and cobalt 5, 10, 15-tris(aminophenyl)-20-(4-carboxyphenyl) porphyrins--GQDs. These complexes were synthesized and characterized accordingly and applied for electrocatalysis. The electrocatalytic experiments were carried out using glassy carbon electrode and the modification was through drop-dry method. The porphyrin and GQDs synthesized were characterized using UV-Vis spectroscopy, Mass spectrometry, X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy and energy dispersive x-ray spectroscopy. The modified electrodes were characterized using cyclic voltammetry and electrochemical Impedance spectroscopy. The introduction of metal ion in the center of the porphyrin improved electrocatalysis. The presence of push-pull substituents in the porphyrin lowered the oxidation potential and improved the catalysis. The presence of GQDs improved catalysis in both symmetric and asymmetric porphyrin compared to individual components. Cobalt porphyrins showed better activity than manganese porphyrin. , Thesis (MSc) -- Faculty of Science, Chemistry, 2022
- Full Text:
- Date Issued: 2022-10-14
- Authors: Jokazi, Mbulelo
- Date: 2022-10-14
- Subjects: Electrocatalysis , Hydrazine , Quantum dots , Graphene , Porphyrins
- Language: English
- Type: Academic theses , Master's theses , text
- Identifier: http://hdl.handle.net/10962/362894 , vital:65372
- Description: The influence of metal porphyrins in electro-oxidation of hydrazine is explored. A series of symmetric and asymmetric porphyrins alone and in the presence of graphene quantum dots (GQDs) are employed in this work. Tetra 4-aminophenyl porphyrin, manganese tetra 4-aminophenyl porphyrin, manganese tetra 4-aminophenyl porphyrin--GQDs, and manganese tetra 4-aminophenyl porphyrin@GQDs are the symmetric porphyrins. The asymmetric porphyrin and composites are 5, 10, 15-tris(aminophenyl)-20-(4-carboxyphenyl) porphyrins, manganese 5, 10, 15-tris(aminophenyl)-20-(4-carboxyphenyl) porphyrins, cobalt 5, 10, 15-tris(aminophenyl)-20-(4-carboxyphenyl) porphyrins, manganese 5, 10, 15-tris(aminophenyl)-20-(4-carboxyphenyl) porphyrins--GQDs, and cobalt 5, 10, 15-tris(aminophenyl)-20-(4-carboxyphenyl) porphyrins--GQDs. These complexes were synthesized and characterized accordingly and applied for electrocatalysis. The electrocatalytic experiments were carried out using glassy carbon electrode and the modification was through drop-dry method. The porphyrin and GQDs synthesized were characterized using UV-Vis spectroscopy, Mass spectrometry, X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy and energy dispersive x-ray spectroscopy. The modified electrodes were characterized using cyclic voltammetry and electrochemical Impedance spectroscopy. The introduction of metal ion in the center of the porphyrin improved electrocatalysis. The presence of push-pull substituents in the porphyrin lowered the oxidation potential and improved the catalysis. The presence of GQDs improved catalysis in both symmetric and asymmetric porphyrin compared to individual components. Cobalt porphyrins showed better activity than manganese porphyrin. , Thesis (MSc) -- Faculty of Science, Chemistry, 2022
- Full Text:
- Date Issued: 2022-10-14
Synthesis and evaluation of the medicinal potential of novel 4-hydroxycoumarin derivatives
- Authors: Manyeruke, Meloddy Hlatini
- Date: 2022-04-08
- Subjects: Uncatalogued
- Language: English
- Type: Academic theses , Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/164458 , vital:41120 , doi:10.21504/10962/164458
- Description: This research has focused on the synthesis and biological evaluation of a broad range of compounds characterised by the presence of the pharmacologically significant 4-hydroxycoumalin scaffold. The compounds were designed to contain additional pharmachophoric centres to enhance bioactivity and generate lead compounds with dualaction potential. The use of 4-hydroxycoumarin as the primary synthon enabled access to various series of 4-hydroxycoumarin conjugates, the reactive 3-position on the 4-hydroxycoumarin moiety being exploited for regioselective construction of the targeted compounds in several steps. Some of the reactants required in the construction of these compounds were specially synthesised and included propargyloxy benzaldehydes, benzyloxy benzaldehydes and 2,3-dihydroxysuccino-dihydride. Overall, eight different families of novel compounds were accessed, comprising conjugates of 4-hydroxycoumarin with bisethylidenesuccinohyrazide, trifluoroacetamide, amino, benzyloxyphenyl-iminoethyl, benzylidenehyrazinyl-thiazoyl, benzylidenehydrazonoethyl, propargyloxybenzylidenehydrazonoethyl and phenylacryloyl moieties using protocols that required minimal work-up and purification. The eighty novel compounds synthesised in the study were fully characterised using HMRS and advanced NMR techniques. Cytotoxicity, HIV-1 IN and PR inhibitory, and antitrypanosomal, antimalarial and anti-Mtb assays were conducted on the synthesised coumarin derivatives. Several compounds exhibited activity against HIV-1 IN, the most potent being a bis-ethylidenesuccinohyrazide with an IC50 value of 3.5 μM. Various compounds exhibited anti-malarial activity (% pLDH viability in the range 62-77%), anti-trypanosomal activity (the most potent with an IC50 = 0.9 μM against T.b. brucei) and a measure of anti-Mtb activity. Apart from two chalconyl derivatives, none of the synthesised compounds exhibited significant cytotoxicity. Conflicting results were obtained from the in silico docking studies; in some cases supporting the observed in vitro assay data while, in others, exhibiting no correlation. , Thesis (PhD) -- Faculty of Science, Chemistry, 2020
- Full Text:
- Date Issued: 2022-04-08
- Authors: Manyeruke, Meloddy Hlatini
- Date: 2022-04-08
- Subjects: Uncatalogued
- Language: English
- Type: Academic theses , Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/164458 , vital:41120 , doi:10.21504/10962/164458
- Description: This research has focused on the synthesis and biological evaluation of a broad range of compounds characterised by the presence of the pharmacologically significant 4-hydroxycoumalin scaffold. The compounds were designed to contain additional pharmachophoric centres to enhance bioactivity and generate lead compounds with dualaction potential. The use of 4-hydroxycoumarin as the primary synthon enabled access to various series of 4-hydroxycoumarin conjugates, the reactive 3-position on the 4-hydroxycoumarin moiety being exploited for regioselective construction of the targeted compounds in several steps. Some of the reactants required in the construction of these compounds were specially synthesised and included propargyloxy benzaldehydes, benzyloxy benzaldehydes and 2,3-dihydroxysuccino-dihydride. Overall, eight different families of novel compounds were accessed, comprising conjugates of 4-hydroxycoumarin with bisethylidenesuccinohyrazide, trifluoroacetamide, amino, benzyloxyphenyl-iminoethyl, benzylidenehyrazinyl-thiazoyl, benzylidenehydrazonoethyl, propargyloxybenzylidenehydrazonoethyl and phenylacryloyl moieties using protocols that required minimal work-up and purification. The eighty novel compounds synthesised in the study were fully characterised using HMRS and advanced NMR techniques. Cytotoxicity, HIV-1 IN and PR inhibitory, and antitrypanosomal, antimalarial and anti-Mtb assays were conducted on the synthesised coumarin derivatives. Several compounds exhibited activity against HIV-1 IN, the most potent being a bis-ethylidenesuccinohyrazide with an IC50 value of 3.5 μM. Various compounds exhibited anti-malarial activity (% pLDH viability in the range 62-77%), anti-trypanosomal activity (the most potent with an IC50 = 0.9 μM against T.b. brucei) and a measure of anti-Mtb activity. Apart from two chalconyl derivatives, none of the synthesised compounds exhibited significant cytotoxicity. Conflicting results were obtained from the in silico docking studies; in some cases supporting the observed in vitro assay data while, in others, exhibiting no correlation. , Thesis (PhD) -- Faculty of Science, Chemistry, 2020
- Full Text:
- Date Issued: 2022-04-08
Formulation and evaluation of liposomal films for buccal delivery of antiretroviral drug
- Authors: Okafor, Nnamdi Ikemefuna
- Date: 2020
- Subjects: Liposomes , Highly active antiretroviral therapy , Antiretroviral agents , HIV infections -- Prevention
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/117161 , vital:34485
- Description: The human immune deficiency virus (HIV) infection has been ranked as one of the most devastating microbial infections in the world. This status is a result of the HIV rapid genetic variation, which limits discovery of a vaccine. Use application of antiretroviral therapy (ARVT) in treatment of the disease caused by the HIV infection (known as acquired immunodeficiency syndrome, HIV-AIDS) is frequently compromised by several factors such as the low bioavailability and severe adverse effects associated with the existing antiretroviral drugs (ARVDs). This underlines the need for controlling the pharmacokinetics profiles of ARVD using effective vehicles that can modify drug biodistribution. The same is true for many other conditions, where delivery systems can determine the success or failure of treatment by controlling pharmacokinetic and dynamic properties. The mucosal linings of the oral cavities in addition offer adorable route of administration for systematic drug delivery, improving drug therapeutic performance and often preferred by clinicians and patients. Liposomes are tiny spherical sacs of phospholipid molecules enclosing water droplets, formed (artificially) to carry drugs or other substances into the tissues by crossing and targeting to specific organelles. This work therefore focused on preparation of liposomes and liposomal buccal films (BFs) for potential buccal delivery of efavirenz, an ARVD model endowed with poor solubility and several side effects. The liposomes were prepared by thin film hydration method using crude soybean lecithin (CL) and cholesterol. Efavirenz loaded liposomes were evaluated for particle size, Zeta potential (ZP), morphology, encapsulation efficiency (EE%) and release kinetics studies. The physiochemical properties of the liposomes were also evaluated using Differential Scanning Calorimetry (DSC), X-ray diffraction (XRD), energy dispersity spectroscopy (EDS), and Fourier transform infrared (FTIR), while the formulation with the best encapsulation efficiency was used as the solvent medium for the buccal film formation. The buccal films were prepared using solvent casting method, where the liposomal suspension was used as the dispersing medium. The films were optimized for physical properties (thickness, weight variation and folding endurance) using digital Vernier calliper and digital weighing balance. The physiochemical properties of the selected BFs films made of Carbopol (CP) and its combination with Pluronic F127 (PF127) were further characterized using XRD, DSC, FTIR, Transmission Electron Microscopy (TEM), EDS and Scanning Electron Microscopy (SEM). The permeation study of the selected BFs was investigated using Franz diffusion cell. The BFs composed of CP alone or its combination with PF127 demonstrated much better bio-adhesive properties than the films made of other polymers (like Hydroxyl propyl methyl cellulose, HPMC) alone or in combination with PF127. The developed liposome formulation showed high encapsulation 98.8 ± 0.01 % in CL to cholesterol mass ratio of 1:1 and total lipid to drug mass ratio of 2:1. The average particle size 104.82 ± 2.29 nm and Zeta potential -50.33 ± 0.95 mV of these liposomes were found to be attractive for targeted delivery to the HIV infected cells. The CP based BFs (without and with PF127) exhibited good film thickness 0.88 ± 0.10 and 0.76 ± 0.14 mm, with weight uniformity 68.22 ± 1.04 and 86.28 ± 2. 16 mg, satisfactory flexibility values 258 and 321, and slightly acidic pH 6.43 ± 0.76 and 6.32 ± 0.01. The swelling percentage was found to be 50 % for CP film alone and 78 % for CP film with PF127. The cumulative amount of drug that permeated through the buccal epithelium over 24 hours was about 66 % from CP film alone and 75 % from CP film with PF127. Since no evidence of the liposomal encapsulation of EFV have been reported to our knowledge, we find the insights from the present study valuable as a set of preliminary data to encourage further investigations of the encapsulation and delivery of EFV like antiretrovirals for enhanced solubility, site targeting and prolonged release using crude soybean lecithin and mucoadhesive polymers, which holds some added economical values as naturally occurring lipid and polymeric mixtures as a promising delivery systems for buccal delivery of ARVDs.
- Full Text:
- Date Issued: 2020
- Authors: Okafor, Nnamdi Ikemefuna
- Date: 2020
- Subjects: Liposomes , Highly active antiretroviral therapy , Antiretroviral agents , HIV infections -- Prevention
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/117161 , vital:34485
- Description: The human immune deficiency virus (HIV) infection has been ranked as one of the most devastating microbial infections in the world. This status is a result of the HIV rapid genetic variation, which limits discovery of a vaccine. Use application of antiretroviral therapy (ARVT) in treatment of the disease caused by the HIV infection (known as acquired immunodeficiency syndrome, HIV-AIDS) is frequently compromised by several factors such as the low bioavailability and severe adverse effects associated with the existing antiretroviral drugs (ARVDs). This underlines the need for controlling the pharmacokinetics profiles of ARVD using effective vehicles that can modify drug biodistribution. The same is true for many other conditions, where delivery systems can determine the success or failure of treatment by controlling pharmacokinetic and dynamic properties. The mucosal linings of the oral cavities in addition offer adorable route of administration for systematic drug delivery, improving drug therapeutic performance and often preferred by clinicians and patients. Liposomes are tiny spherical sacs of phospholipid molecules enclosing water droplets, formed (artificially) to carry drugs or other substances into the tissues by crossing and targeting to specific organelles. This work therefore focused on preparation of liposomes and liposomal buccal films (BFs) for potential buccal delivery of efavirenz, an ARVD model endowed with poor solubility and several side effects. The liposomes were prepared by thin film hydration method using crude soybean lecithin (CL) and cholesterol. Efavirenz loaded liposomes were evaluated for particle size, Zeta potential (ZP), morphology, encapsulation efficiency (EE%) and release kinetics studies. The physiochemical properties of the liposomes were also evaluated using Differential Scanning Calorimetry (DSC), X-ray diffraction (XRD), energy dispersity spectroscopy (EDS), and Fourier transform infrared (FTIR), while the formulation with the best encapsulation efficiency was used as the solvent medium for the buccal film formation. The buccal films were prepared using solvent casting method, where the liposomal suspension was used as the dispersing medium. The films were optimized for physical properties (thickness, weight variation and folding endurance) using digital Vernier calliper and digital weighing balance. The physiochemical properties of the selected BFs films made of Carbopol (CP) and its combination with Pluronic F127 (PF127) were further characterized using XRD, DSC, FTIR, Transmission Electron Microscopy (TEM), EDS and Scanning Electron Microscopy (SEM). The permeation study of the selected BFs was investigated using Franz diffusion cell. The BFs composed of CP alone or its combination with PF127 demonstrated much better bio-adhesive properties than the films made of other polymers (like Hydroxyl propyl methyl cellulose, HPMC) alone or in combination with PF127. The developed liposome formulation showed high encapsulation 98.8 ± 0.01 % in CL to cholesterol mass ratio of 1:1 and total lipid to drug mass ratio of 2:1. The average particle size 104.82 ± 2.29 nm and Zeta potential -50.33 ± 0.95 mV of these liposomes were found to be attractive for targeted delivery to the HIV infected cells. The CP based BFs (without and with PF127) exhibited good film thickness 0.88 ± 0.10 and 0.76 ± 0.14 mm, with weight uniformity 68.22 ± 1.04 and 86.28 ± 2. 16 mg, satisfactory flexibility values 258 and 321, and slightly acidic pH 6.43 ± 0.76 and 6.32 ± 0.01. The swelling percentage was found to be 50 % for CP film alone and 78 % for CP film with PF127. The cumulative amount of drug that permeated through the buccal epithelium over 24 hours was about 66 % from CP film alone and 75 % from CP film with PF127. Since no evidence of the liposomal encapsulation of EFV have been reported to our knowledge, we find the insights from the present study valuable as a set of preliminary data to encourage further investigations of the encapsulation and delivery of EFV like antiretrovirals for enhanced solubility, site targeting and prolonged release using crude soybean lecithin and mucoadhesive polymers, which holds some added economical values as naturally occurring lipid and polymeric mixtures as a promising delivery systems for buccal delivery of ARVDs.
- Full Text:
- Date Issued: 2020
BODIPY and porphyrin dyes for direct glucose sensing and optical limiting applications
- Authors: Ndebele, Nobuhle
- Date: 2019
- Subjects: Boron compounds , Boric acid , Porphyrins , Dyes and dying -- Chemistry
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/97221 , vital:31412
- Description: A series of BODIPY dyes functionalised with boronic acid in the 3,5-positions were successfully synthesised and characterised by using various analytical techniques. The dyes were prepared through a slight modification of the conventional acid catalysed condensation method. Phenylboronic acid moieties were added as styryl groups at the 3,5-positions of the 1,3,5,7-tetrametylBODIPY cores using a modified Knoevengal condensation method. The addition of the styryls resulted in the main absorption band of the dyes red-shifting to the 630−650 nm region. The photophysical and electrochemical properties of these dyes were studied to determine whether the dyes are suitable for use in the fluorescent, colourimetric and electrochemical detection of glucose. Boronic acid moieties were added as bioreceptor recognition elements because they have an affinity for carbohydrates and therefore would be able to bind and “detect” glucose. The series of BODIPY dyes did not show a “turn-on” fluorescence effect upon addition with glucose at the physiological pH. This was attributed on the basis of molecular modelling to the absence of an MO localised on the boronic-acid-substituted styryl moieties that lie close in energy to the HOMO and LUMO that facilitates the formation of an intramolecular charge transfer state. However, colourimetric changes that are visible to the naked eye are observed at basic pH when glucose was added to the dye solutions. The dyes exhibited favourable electrochemical behaviour and were able to detect glucose directly in this context when glassy carbon electrodes are modified through the drop dry method. A series of Sn(IV) porphyrins with thienyl and phenyl groups at the meso-positions were successfully synthesised and characterised. Pyridine and tetrabutyl axial ligands were added to the porphyrins to limit aggregation. The optical limiting properties of these porphyrins and three styrylated BODIPY dyes were studied in benzene and dichloromethane. Dyes were also embedded in polystyrene and studied as thin films to further gauge their suitability for use in optical limiting applications. Second-order hyperpolarizability, third-order susceptibly, non-linear absorption with reversible saturable absorption and the optical limiting threshold, were the parameters studied. Three of the four porphyrins and the three styrylated BODIPY dyes showed favourable optical limiting behaviour, which was further enhanced when the dyes are embedded in polymer thin films.
- Full Text:
- Date Issued: 2019
- Authors: Ndebele, Nobuhle
- Date: 2019
- Subjects: Boron compounds , Boric acid , Porphyrins , Dyes and dying -- Chemistry
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/97221 , vital:31412
- Description: A series of BODIPY dyes functionalised with boronic acid in the 3,5-positions were successfully synthesised and characterised by using various analytical techniques. The dyes were prepared through a slight modification of the conventional acid catalysed condensation method. Phenylboronic acid moieties were added as styryl groups at the 3,5-positions of the 1,3,5,7-tetrametylBODIPY cores using a modified Knoevengal condensation method. The addition of the styryls resulted in the main absorption band of the dyes red-shifting to the 630−650 nm region. The photophysical and electrochemical properties of these dyes were studied to determine whether the dyes are suitable for use in the fluorescent, colourimetric and electrochemical detection of glucose. Boronic acid moieties were added as bioreceptor recognition elements because they have an affinity for carbohydrates and therefore would be able to bind and “detect” glucose. The series of BODIPY dyes did not show a “turn-on” fluorescence effect upon addition with glucose at the physiological pH. This was attributed on the basis of molecular modelling to the absence of an MO localised on the boronic-acid-substituted styryl moieties that lie close in energy to the HOMO and LUMO that facilitates the formation of an intramolecular charge transfer state. However, colourimetric changes that are visible to the naked eye are observed at basic pH when glucose was added to the dye solutions. The dyes exhibited favourable electrochemical behaviour and were able to detect glucose directly in this context when glassy carbon electrodes are modified through the drop dry method. A series of Sn(IV) porphyrins with thienyl and phenyl groups at the meso-positions were successfully synthesised and characterised. Pyridine and tetrabutyl axial ligands were added to the porphyrins to limit aggregation. The optical limiting properties of these porphyrins and three styrylated BODIPY dyes were studied in benzene and dichloromethane. Dyes were also embedded in polystyrene and studied as thin films to further gauge their suitability for use in optical limiting applications. Second-order hyperpolarizability, third-order susceptibly, non-linear absorption with reversible saturable absorption and the optical limiting threshold, were the parameters studied. Three of the four porphyrins and the three styrylated BODIPY dyes showed favourable optical limiting behaviour, which was further enhanced when the dyes are embedded in polymer thin films.
- Full Text:
- Date Issued: 2019
Symmetry and asymmetry in electrocatalysis: enhancing the electrocatalytic activity of phthalocyanines through synergy with doped graphene quantum dots
- Nkhahle, Reitumetse Precious
- Authors: Nkhahle, Reitumetse Precious
- Date: 2020
- Subjects: Phthalocyanines , Quantum dots , Graphene
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/117585 , vital:34529
- Description: An exploration on the enhancement of the electrocatalytic activity of phthalocyanines (Pcs) through coupling with a series of graphene quantum dots (GQDs) is undertaken. The preliminary studies using symmetrical Pcs, a cobalt and an iron chloride tetra substituted diethylaminophenoxy Pc (complexes 1 and 2), for the electro-oxidation of nitrite revealed through the various sequential modifications that doped GQDs fare better than their pristine counterparts with respect to improving the electrocatalytic behaviour of Pcs, in particular, the nitrogen-doped GQDs (NGQDs). Following up on this, a series of asymmetric Pc complexes; 2,9,16-tris-(4-tert-butylphenoxy) mono carboxyphenoxy phthalocyanato cobalt (II) (3), 2,9,16-tris-(4-tert-butylphenoxy) mono aminophenoxy phthalocyanato cobalt (II) (4), 2,9,16-tris-(3-diethylamino)phenoxy) mono carboxyphenoxy phthalocyanato cobalt (II) (5) and 2,9,16-tris-(3-diethylamino)phenoxy) mono aminophenoxy phthalocyanato cobalt (II) (6) was prepared in which push-pull systems were compared to other asymmetric complexes that lack this effect towards the electrocatalytic sensing of hydrazine. All asymmetric complexes (3-6) were π-stacked to the NGQDs while those with an NH2 group (4 and 6), were also covalently linked to the NGQDs. These complexes and their corresponding conjugates were characterized accordingly and applied as electrocatalysts in the oxidation of hydrazine. The electrochemical studies revealed that π π stacking yields better responses (higher sensitivities and lower limits of detection) than covalent linking because there are less forces acting on the graphene network. Covalent linking introduces both tensile and compressive forces which in turn results in an increase in the ID/IG ratio and that is unfavourable for electrocatalysis. In comparing the electrodes composed of the π-stacked conjugates to those altered through sequential modifications, despite the conditions not being the same, it can be inferred that the magnitude of the electrostatic forces between the Pcs and the GQDs also plays a significant role in electrocatalysis. The π-stacked conjugates, owing to the manner in which they were prepared, have stronger electrostatic forces acting between the Pc and GQDs hence they were able to elicit a better electrochemical response than the sequentially modified electrodes. In addition to that, it appears that asymmetric Pcs are better electrocatalysts in comparison to the symmetric Pcs.
- Full Text:
- Date Issued: 2020
- Authors: Nkhahle, Reitumetse Precious
- Date: 2020
- Subjects: Phthalocyanines , Quantum dots , Graphene
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/117585 , vital:34529
- Description: An exploration on the enhancement of the electrocatalytic activity of phthalocyanines (Pcs) through coupling with a series of graphene quantum dots (GQDs) is undertaken. The preliminary studies using symmetrical Pcs, a cobalt and an iron chloride tetra substituted diethylaminophenoxy Pc (complexes 1 and 2), for the electro-oxidation of nitrite revealed through the various sequential modifications that doped GQDs fare better than their pristine counterparts with respect to improving the electrocatalytic behaviour of Pcs, in particular, the nitrogen-doped GQDs (NGQDs). Following up on this, a series of asymmetric Pc complexes; 2,9,16-tris-(4-tert-butylphenoxy) mono carboxyphenoxy phthalocyanato cobalt (II) (3), 2,9,16-tris-(4-tert-butylphenoxy) mono aminophenoxy phthalocyanato cobalt (II) (4), 2,9,16-tris-(3-diethylamino)phenoxy) mono carboxyphenoxy phthalocyanato cobalt (II) (5) and 2,9,16-tris-(3-diethylamino)phenoxy) mono aminophenoxy phthalocyanato cobalt (II) (6) was prepared in which push-pull systems were compared to other asymmetric complexes that lack this effect towards the electrocatalytic sensing of hydrazine. All asymmetric complexes (3-6) were π-stacked to the NGQDs while those with an NH2 group (4 and 6), were also covalently linked to the NGQDs. These complexes and their corresponding conjugates were characterized accordingly and applied as electrocatalysts in the oxidation of hydrazine. The electrochemical studies revealed that π π stacking yields better responses (higher sensitivities and lower limits of detection) than covalent linking because there are less forces acting on the graphene network. Covalent linking introduces both tensile and compressive forces which in turn results in an increase in the ID/IG ratio and that is unfavourable for electrocatalysis. In comparing the electrodes composed of the π-stacked conjugates to those altered through sequential modifications, despite the conditions not being the same, it can be inferred that the magnitude of the electrostatic forces between the Pcs and the GQDs also plays a significant role in electrocatalysis. The π-stacked conjugates, owing to the manner in which they were prepared, have stronger electrostatic forces acting between the Pc and GQDs hence they were able to elicit a better electrochemical response than the sequentially modified electrodes. In addition to that, it appears that asymmetric Pcs are better electrocatalysts in comparison to the symmetric Pcs.
- Full Text:
- Date Issued: 2020
Nonlinear optical responses of targeted phthalocyanines when conjugated with nanomaterials or fabricated into polymer thin films
- Authors: Nwaji, Njemuwa Njoku
- Date: 2019
- Subjects: Electrochemistry , Phthalocyanines , Nanoparticles , Bioconjugates , Thin films , Polymers , Nonlinear optics , Nonlinear optical spectroscopy , Nanostructured materials , Raman effect
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/71625 , vital:29926
- Description: A number of zinc, gallium and indium metallophthalocyanines (MPcs) with diverse substituents have been synthesized and characterized using various characterization tools such as proton nuclear magnetic resonance (1HNMR), matrix assisted laser desorption time of flight (MALDI-TOF) mass spectrometry, Fourier-transformed infra-red (FT-IR), Ultraviolet-visible (Uv-vis) spectrophotometry, magnetic circular dichroism and CHNS elemental analysis. The time dependent density functional theory was employed to probe the origin of spectroscopic information in these complexes. Complexes with gallium and indium as central metal showed higher triplet quantum yield compared to the zinc derivatives. Some of the MPcs were covalently linked to nanomaterials such as CdTe, CdTeSe, CdTeSe/ZnO, graphene quantum dots (GQDs) as well as metallic gold (AuNPs) and silver (AgNPs) nanoparticles. Others were either surface assembled onto AuNPs and AgNPs or embedded into polystyrene as polymer source. The phthalocyanine-nanomaterial composites (Pc-NMCs) were characterized with FT-IR, UV-visible spectrophotometry, transmission electron microscopy (TEM), dynamic light scattering (DLS), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS) and X-ray diffractometry (XRD). The thickness of the thin films was determined by utilization of the knife edge attachment of the A Bruker D8 Discover X-ray diffraction. The optical limiting properties (using the open-aperture Z-scan technique) of the MPcs and the Pc-NMCs were investigated. The investigated MPcs complexes generally showed good optical limiting properties. The nonlinear optical response of the MPcs were improved in the presence of nanomaterials such as the semiconductor quantum dots (SQDs), graphene quantum dots (GQDs) as well as metallic AuNPs and AgNPs with MPc-QDs showing the best optical limiting behavior. The optical limiting properties of the MPcs were greatly enhanced in the presence of polymer thin films.
- Full Text:
- Date Issued: 2019
- Authors: Nwaji, Njemuwa Njoku
- Date: 2019
- Subjects: Electrochemistry , Phthalocyanines , Nanoparticles , Bioconjugates , Thin films , Polymers , Nonlinear optics , Nonlinear optical spectroscopy , Nanostructured materials , Raman effect
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/71625 , vital:29926
- Description: A number of zinc, gallium and indium metallophthalocyanines (MPcs) with diverse substituents have been synthesized and characterized using various characterization tools such as proton nuclear magnetic resonance (1HNMR), matrix assisted laser desorption time of flight (MALDI-TOF) mass spectrometry, Fourier-transformed infra-red (FT-IR), Ultraviolet-visible (Uv-vis) spectrophotometry, magnetic circular dichroism and CHNS elemental analysis. The time dependent density functional theory was employed to probe the origin of spectroscopic information in these complexes. Complexes with gallium and indium as central metal showed higher triplet quantum yield compared to the zinc derivatives. Some of the MPcs were covalently linked to nanomaterials such as CdTe, CdTeSe, CdTeSe/ZnO, graphene quantum dots (GQDs) as well as metallic gold (AuNPs) and silver (AgNPs) nanoparticles. Others were either surface assembled onto AuNPs and AgNPs or embedded into polystyrene as polymer source. The phthalocyanine-nanomaterial composites (Pc-NMCs) were characterized with FT-IR, UV-visible spectrophotometry, transmission electron microscopy (TEM), dynamic light scattering (DLS), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS) and X-ray diffractometry (XRD). The thickness of the thin films was determined by utilization of the knife edge attachment of the A Bruker D8 Discover X-ray diffraction. The optical limiting properties (using the open-aperture Z-scan technique) of the MPcs and the Pc-NMCs were investigated. The investigated MPcs complexes generally showed good optical limiting properties. The nonlinear optical response of the MPcs were improved in the presence of nanomaterials such as the semiconductor quantum dots (SQDs), graphene quantum dots (GQDs) as well as metallic AuNPs and AgNPs with MPc-QDs showing the best optical limiting behavior. The optical limiting properties of the MPcs were greatly enhanced in the presence of polymer thin films.
- Full Text:
- Date Issued: 2019
Application of computational methods in elucidating the isomerization step in the biosynthesis of coumarins
- Authors: Tshiwawa, Tendamudzimu
- Date: 2019
- Subjects: Coumarins , Isomerization , Biosynthesis , Organic compounds -- Synthesis , Cinnamic acid
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/67646 , vital:29124
- Description: The identity of the enzyme(s) responsible for the biosynthetic transformation of cinnamic acid derivatives to important, naturally occurring coumarins has yet to be established. This study constitutes a high-level theoretical analysis of the possibility that a recently reported molecular mechanism of the synthesis of coumarins from Baylis-Hillman adducts, may provide a viable model for three critical phases in the biosynthetic pathway Particular attention has been given to the first of these phases: i) E→Z isomerisation of the cinnamic acid precursor; ii) Cyclisation (lactonisation) to the hemi-acetal intermediate; and ii) Dehydration to afford the coumarin derivative. In order to accomplish this analysis, an enzyme capable, theoretically, of effecting this E→Z isomerisation required identification, and its potential involvement in the transformation mechanism explored. Combined Molecular Mechanics and high-level Quantum Mechanical/DFT calculations were used to access complementary models of appropriate complexes and relevant processes within the enzyme active sites of a range of eleven Chalcone Isomerase (CHI) enzyme candidates, the structures of which were downloaded from the Protein Data Bank. Detailed B3LYP/6-31+G(d,p) calculations have provided pictures of the relative populations of conformations within the ensemble of conformations available at normal temperatures. Conformations of several protonation states of cinnamic acid derivatives have been studied in this way, and the results obtained showed that coupled protonation and deprotonation of (E)-o-coumaric acid provides a viable approach to achieve the E→Z isomerization. In silico docking of the B3LYP/6-31+G(d,p) optimized (E)-o-coumaric acid derivatives in the active sites of each of the candidate CHI enzymes (CHI) revealed that (E)-o-coumaric acid fits well within the active sites of Medicago Sativa CHI crystallographic structures with 1FM8 showing best potential for not only accommodating (E)-o-coumaric acid , but also providing appropriate protein active site residues to effect the simultaneous protonation and deprotonation of the substrate , two residues being optimally placed to facilitate these critical processes. Further exploration of the chemical properties and qualities of selected CHI enzymes, undertaken using High Throughput Virtual Screening (HTVS), confirmed 1FM8 as a viable choice for further studies of the enzyme-catalysed E→Z isomerization of (E)-o-coumaric acid. A molecular dynamics study, performed to further evaluate the evolution of (E)-o-coumaric acid in the CHI active site over time, showed that the ligand in the 1FM8 active site is not only stable, but also that the desired protein-ligand interactions persist throughout the simulation period to facilitate the E→Z isomerization. An integrated molecular orbital and molecular mechanics (ONIOM) study of the 1FM8-(E)-o-coumaric acid complex, involving the direct protonation and deprotonation of the ligand by protein residues; has provided a plausible mechanism for the E → Z isomerization of (E)-o-coumaric acid within the 1FM8 active site; a transition state complex (with an activation energy of ca. 50 kCal.mol-1) has been located and its connection with both the (E)- and (Z)-o-coumaric acid isomer has been confirmed by Intrinsic Reaction Coordinate (IRC) calculations. More realistic models of the 1FM8-(E)-o-coumaric acid complex, with the inclusion of water solvent molecules, have been obtained at both the QM/MM and adaptive QM/MM levels which simulate the dynamic active site at the QM level. The results indicate that the simultaneous protonation and deprotonation of (E)-o-coumaric acid within the CHI enzyme is a water-mediated process – a conclusion consistent with similar reported processes. Visual inspection of the 1FM8-(Z)-o-coumaric acid complex reveals both the necessary orientation of the phenolic and carboxylic acid moieties of the (Z)-o-coumaric acid and the presence of appropriate, proximal active site residues with the potential to permit catalysis of the subsequent lactonisation and dehydration steps required to generate coumarin.
- Full Text:
- Date Issued: 2019
- Authors: Tshiwawa, Tendamudzimu
- Date: 2019
- Subjects: Coumarins , Isomerization , Biosynthesis , Organic compounds -- Synthesis , Cinnamic acid
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/67646 , vital:29124
- Description: The identity of the enzyme(s) responsible for the biosynthetic transformation of cinnamic acid derivatives to important, naturally occurring coumarins has yet to be established. This study constitutes a high-level theoretical analysis of the possibility that a recently reported molecular mechanism of the synthesis of coumarins from Baylis-Hillman adducts, may provide a viable model for three critical phases in the biosynthetic pathway Particular attention has been given to the first of these phases: i) E→Z isomerisation of the cinnamic acid precursor; ii) Cyclisation (lactonisation) to the hemi-acetal intermediate; and ii) Dehydration to afford the coumarin derivative. In order to accomplish this analysis, an enzyme capable, theoretically, of effecting this E→Z isomerisation required identification, and its potential involvement in the transformation mechanism explored. Combined Molecular Mechanics and high-level Quantum Mechanical/DFT calculations were used to access complementary models of appropriate complexes and relevant processes within the enzyme active sites of a range of eleven Chalcone Isomerase (CHI) enzyme candidates, the structures of which were downloaded from the Protein Data Bank. Detailed B3LYP/6-31+G(d,p) calculations have provided pictures of the relative populations of conformations within the ensemble of conformations available at normal temperatures. Conformations of several protonation states of cinnamic acid derivatives have been studied in this way, and the results obtained showed that coupled protonation and deprotonation of (E)-o-coumaric acid provides a viable approach to achieve the E→Z isomerization. In silico docking of the B3LYP/6-31+G(d,p) optimized (E)-o-coumaric acid derivatives in the active sites of each of the candidate CHI enzymes (CHI) revealed that (E)-o-coumaric acid fits well within the active sites of Medicago Sativa CHI crystallographic structures with 1FM8 showing best potential for not only accommodating (E)-o-coumaric acid , but also providing appropriate protein active site residues to effect the simultaneous protonation and deprotonation of the substrate , two residues being optimally placed to facilitate these critical processes. Further exploration of the chemical properties and qualities of selected CHI enzymes, undertaken using High Throughput Virtual Screening (HTVS), confirmed 1FM8 as a viable choice for further studies of the enzyme-catalysed E→Z isomerization of (E)-o-coumaric acid. A molecular dynamics study, performed to further evaluate the evolution of (E)-o-coumaric acid in the CHI active site over time, showed that the ligand in the 1FM8 active site is not only stable, but also that the desired protein-ligand interactions persist throughout the simulation period to facilitate the E→Z isomerization. An integrated molecular orbital and molecular mechanics (ONIOM) study of the 1FM8-(E)-o-coumaric acid complex, involving the direct protonation and deprotonation of the ligand by protein residues; has provided a plausible mechanism for the E → Z isomerization of (E)-o-coumaric acid within the 1FM8 active site; a transition state complex (with an activation energy of ca. 50 kCal.mol-1) has been located and its connection with both the (E)- and (Z)-o-coumaric acid isomer has been confirmed by Intrinsic Reaction Coordinate (IRC) calculations. More realistic models of the 1FM8-(E)-o-coumaric acid complex, with the inclusion of water solvent molecules, have been obtained at both the QM/MM and adaptive QM/MM levels which simulate the dynamic active site at the QM level. The results indicate that the simultaneous protonation and deprotonation of (E)-o-coumaric acid within the CHI enzyme is a water-mediated process – a conclusion consistent with similar reported processes. Visual inspection of the 1FM8-(Z)-o-coumaric acid complex reveals both the necessary orientation of the phenolic and carboxylic acid moieties of the (Z)-o-coumaric acid and the presence of appropriate, proximal active site residues with the potential to permit catalysis of the subsequent lactonisation and dehydration steps required to generate coumarin.
- Full Text:
- Date Issued: 2019
Tetra 4-(propargyloxy)phenoxy phthalocyanines: synthesis, spectroscopic, nonlinear optical and electrocatalytic properties
- Authors: Mwanza, Daniel
- Date: 2017
- Subjects: Phthalocyanines , Nonlinear optics , Electrocatalysis , Spectrum analysis , Thermogravimetry , Phthalocyanines Spectra
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/65144 , vital:28695
- Description: This study presents the synthesis, spectroscopic, photophysical and theoretical characterisation of metal-free (H2TPrOPhOPc), cobalt (CoTPrOPhOPc) and manganese (MnTPrOPhOPc) tetra 4-(4-propargyloxy) phenoxy phthalocyanines. Thermal analysis using thermogravimetric analysis (TGA) confirmed the excellent thermal stability of synthesized tetra 4-(4- propargyloxy) phenoxy phthalocyanines. The metal complexes, CoTPrOPhOPc and MnTPrOPhOPc, exhibited better thermal stability when compared to H2TPrOPhOPc. The residual percentage weight remaining was approximately 70% for CoTPrOPhOPc and MnTPrOPhOPc and 45% for H2TPrOPhOPc after 600°C, clearly confirming the stability of the metal complexes. The MTPrOPhOPcs (where M = H2, Co and Mn) complexes exhibited excellent nonlinear optical properties with strong reverse saturable absorption (RSA), especially when 560 nm excitation laser was used. Their nonlinear optical properties followed this trend: H2TPrOPhOPc > CoTPrOPhOPc > MnTPrOPhOPc. According to the trend observed, the H2TPrOPhOPc was an excellent nonlinear optical limiter when compared to the CoTPrOPhOPc and MnTPrOPhOPc. All the investigated complexes exhibited optical limiting properties comparable to the phthalocyanine complexes reported in the literature. The MTPrOPhOPc complexes were further studied for their electrocatalytic and electroanalytical properties towards the detection of hydrogen peroxide. For the electrocatalytic studies, the synthesized complexes were immobilized onto gold electrode surfaces pre-functionalized with phenylazide (Au-PAz) monolayer. Copper (I) catalyzed alkynyl-azide cycloaddition reaction was used to covalently immobilize the MTPrOPhOPcs onto the gold electrode surfaces to form Au-PAz-MTPrOPhOPc. The MTPrOPhOPcs modified gold surfaces (Au-PAz-MTPrOPhOPc) exhibited good reproducibility and stability in various electrolyte conditions. Electrochemical and surface characterisation of the functionalised gold electrode surfaces confirmed the presence of the MTPrOPhOPcs and their electroanalysis was excellent towards electrocatalytic reduction of H2O2, with the limit of detection (LoD) and limit of quantification (LoQ) in the ^M range. The electrocatalytic reduction peaks for H2O2 were observed at -0.37 V for Au-PAz-MnTPrOPhOPc and -0.31 V for Au-PAz-CoTPrOPhOPc when Ag|AgCl pseudo-reference electrode was used. The Au-PAz-MnTPrOPhOPc and Au- PAz-CoTPrOPhOPc gold electrode surfaces showed good sensitivity and reproducibility towards the electrocatalytic reduction of hydrogen peroxide in pH 7.4 phosphate buffer solution. , Thesis (MSc) -- Faculty of Science, Chemistry, 2017
- Full Text:
- Date Issued: 2017
- Authors: Mwanza, Daniel
- Date: 2017
- Subjects: Phthalocyanines , Nonlinear optics , Electrocatalysis , Spectrum analysis , Thermogravimetry , Phthalocyanines Spectra
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/65144 , vital:28695
- Description: This study presents the synthesis, spectroscopic, photophysical and theoretical characterisation of metal-free (H2TPrOPhOPc), cobalt (CoTPrOPhOPc) and manganese (MnTPrOPhOPc) tetra 4-(4-propargyloxy) phenoxy phthalocyanines. Thermal analysis using thermogravimetric analysis (TGA) confirmed the excellent thermal stability of synthesized tetra 4-(4- propargyloxy) phenoxy phthalocyanines. The metal complexes, CoTPrOPhOPc and MnTPrOPhOPc, exhibited better thermal stability when compared to H2TPrOPhOPc. The residual percentage weight remaining was approximately 70% for CoTPrOPhOPc and MnTPrOPhOPc and 45% for H2TPrOPhOPc after 600°C, clearly confirming the stability of the metal complexes. The MTPrOPhOPcs (where M = H2, Co and Mn) complexes exhibited excellent nonlinear optical properties with strong reverse saturable absorption (RSA), especially when 560 nm excitation laser was used. Their nonlinear optical properties followed this trend: H2TPrOPhOPc > CoTPrOPhOPc > MnTPrOPhOPc. According to the trend observed, the H2TPrOPhOPc was an excellent nonlinear optical limiter when compared to the CoTPrOPhOPc and MnTPrOPhOPc. All the investigated complexes exhibited optical limiting properties comparable to the phthalocyanine complexes reported in the literature. The MTPrOPhOPc complexes were further studied for their electrocatalytic and electroanalytical properties towards the detection of hydrogen peroxide. For the electrocatalytic studies, the synthesized complexes were immobilized onto gold electrode surfaces pre-functionalized with phenylazide (Au-PAz) monolayer. Copper (I) catalyzed alkynyl-azide cycloaddition reaction was used to covalently immobilize the MTPrOPhOPcs onto the gold electrode surfaces to form Au-PAz-MTPrOPhOPc. The MTPrOPhOPcs modified gold surfaces (Au-PAz-MTPrOPhOPc) exhibited good reproducibility and stability in various electrolyte conditions. Electrochemical and surface characterisation of the functionalised gold electrode surfaces confirmed the presence of the MTPrOPhOPcs and their electroanalysis was excellent towards electrocatalytic reduction of H2O2, with the limit of detection (LoD) and limit of quantification (LoQ) in the ^M range. The electrocatalytic reduction peaks for H2O2 were observed at -0.37 V for Au-PAz-MnTPrOPhOPc and -0.31 V for Au-PAz-CoTPrOPhOPc when Ag|AgCl pseudo-reference electrode was used. The Au-PAz-MnTPrOPhOPc and Au- PAz-CoTPrOPhOPc gold electrode surfaces showed good sensitivity and reproducibility towards the electrocatalytic reduction of hydrogen peroxide in pH 7.4 phosphate buffer solution. , Thesis (MSc) -- Faculty of Science, Chemistry, 2017
- Full Text:
- Date Issued: 2017
Graphene quantum dots and their metallophthalocyanines nanoconjugates as novel photoluminescent nanosensors
- Authors: Achadu, Ojodomo John
- Date: 2018
- Subjects: Quantum dots , Graphene , Phthalocyanines , Nanoconjugates , Novel photoluminescent nanosensors , Metallophthalocyanines
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/60719 , vital:27821
- Description: The fabrication and application of graphene quantum dots (GQDs)-based photoluminescent probes for the detection of analytes is presented. GQDs were functionalized with complexes such as metallophthalocyanines (MPcs), metal nanoparticles (Au@Ag NPs), 2,2,6,6-tetramethyl(piperidin-1-yl)oxyl (TEMPO), maleimide and thymine for the sensing of target analytes such as ascorbic acid (AA), biothiols (cysteine, homocysteine and glutathione) and mercury ion (Hg²+). The design strategy and approach was based on the quenching of the fluorescence of the GQDs upon functionalization with the above-mentioned complexes, which could be restored in the presence of the target analytes (due to their specific interaction affinity with the complexes). For the detection of AA, GQDs were covalently and/or non-covalently conjugated to TEMPO-bearing complexes to form GQDs-4A-TEMPO and GQDs-TEMPO-MPc systems with nanomolar limits of detection. For the detection of biothiols, Au@Ag NPs and maleimide-bearing complexes (MPc), which have specific affinity to interact with biothiols, were deployed. Hg²+ detection involved the use of GQDs and/or MPcs with thiol and thymine groups, respectively. In addition, a smart sensing platform was designed for the dual detection of biothiols and Hg²+ using supramolecular hybrid of polyethyleneimine functionalized-GQDs and MPc-Au@Ag conjugate. The probe could detect, in a sequential manner, Hg²+ and biothiols with high sensitivity. Results obtained from the LODs of the probes showed that GQDs sensing performances could be enhanced in the presence of MPcs. The probes designed in this work were successfully deployed in the assays of the target analytes in real samples and the recoveries obtained confirmed the analytical applicability of the probes.
- Full Text:
- Date Issued: 2018
- Authors: Achadu, Ojodomo John
- Date: 2018
- Subjects: Quantum dots , Graphene , Phthalocyanines , Nanoconjugates , Novel photoluminescent nanosensors , Metallophthalocyanines
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/60719 , vital:27821
- Description: The fabrication and application of graphene quantum dots (GQDs)-based photoluminescent probes for the detection of analytes is presented. GQDs were functionalized with complexes such as metallophthalocyanines (MPcs), metal nanoparticles (Au@Ag NPs), 2,2,6,6-tetramethyl(piperidin-1-yl)oxyl (TEMPO), maleimide and thymine for the sensing of target analytes such as ascorbic acid (AA), biothiols (cysteine, homocysteine and glutathione) and mercury ion (Hg²+). The design strategy and approach was based on the quenching of the fluorescence of the GQDs upon functionalization with the above-mentioned complexes, which could be restored in the presence of the target analytes (due to their specific interaction affinity with the complexes). For the detection of AA, GQDs were covalently and/or non-covalently conjugated to TEMPO-bearing complexes to form GQDs-4A-TEMPO and GQDs-TEMPO-MPc systems with nanomolar limits of detection. For the detection of biothiols, Au@Ag NPs and maleimide-bearing complexes (MPc), which have specific affinity to interact with biothiols, were deployed. Hg²+ detection involved the use of GQDs and/or MPcs with thiol and thymine groups, respectively. In addition, a smart sensing platform was designed for the dual detection of biothiols and Hg²+ using supramolecular hybrid of polyethyleneimine functionalized-GQDs and MPc-Au@Ag conjugate. The probe could detect, in a sequential manner, Hg²+ and biothiols with high sensitivity. Results obtained from the LODs of the probes showed that GQDs sensing performances could be enhanced in the presence of MPcs. The probes designed in this work were successfully deployed in the assays of the target analytes in real samples and the recoveries obtained confirmed the analytical applicability of the probes.
- Full Text:
- Date Issued: 2018
Development of graphene materials and phthalocyanines for application in dye-sensitized solar cells
- Authors: Chindeka, Francis
- Date: 2020
- Subjects: Dye-sensitized solar cells , Graphene , Phthalocyanines , Molecular orbitals , Impedance spectroscopy
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/166092 , vital:41328
- Description: Two sets of dye-sensitized solar cells (DSSCs) were fabricated. In the first set, dye-sensitized solar cells (DSSC) were fabricated by incorporating graphene materials as catalysts at the counter electrode. Platinum was also used as a catalyst for comparative purposes. Different phthalocyanines: hydroxyl indium tetracarboxyphenoxy phthalocyanine (1), chloro indium octacarboxy phthalocyanine (2) and dibenzoic acid silicon phthalocyanine (3) were used as dyes. Complex 3 gave the highest power conversion efficiency (η) of 3.19% when using nitrogen doped reduced graphene oxide nanosheets (NrGONS) as a catalyst at the counter electrode, and TiO2 containing rGONS at the anode. The value obtained is close to 3.8% obtained when using Pt catalyst instead of NrGONS at the cathode, thus confirming that NrGONS is a promising candidate to replace the more expensive Pt. The study also shows that placing rGONS on both the anode and cathode improves efficiency. In the second set, DSSCs were fabricated by using 2(3,5-biscarboxyphenoxy), 9(10), 16(17), 23(24)-tri(tertbutyl) phthalocyaninato Cu (4) and Zn (5) complexes as dyes on the ITO-TiO2 photoanodes containing reduced graphene oxide nanosheets (rGONS) or nitrogen-doped rGONS (NrGONS). The evaluation of the assembled DSSCs revealed that using ITO-TiO2-NrGONS-CuPc (4) photoanode had the highest fill factor (FF) and power conversion efficiency (ɳ) of 69 % and 4.36 % respectively. These results show that the asymmetrical phthalocyanine complexes (4) and (5) showed significant improvement on the performance of the DSSC compared to previous work on symmetrical carboxylated phthalocyanines with ɳ = 3.19%.
- Full Text:
- Date Issued: 2020
- Authors: Chindeka, Francis
- Date: 2020
- Subjects: Dye-sensitized solar cells , Graphene , Phthalocyanines , Molecular orbitals , Impedance spectroscopy
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/166092 , vital:41328
- Description: Two sets of dye-sensitized solar cells (DSSCs) were fabricated. In the first set, dye-sensitized solar cells (DSSC) were fabricated by incorporating graphene materials as catalysts at the counter electrode. Platinum was also used as a catalyst for comparative purposes. Different phthalocyanines: hydroxyl indium tetracarboxyphenoxy phthalocyanine (1), chloro indium octacarboxy phthalocyanine (2) and dibenzoic acid silicon phthalocyanine (3) were used as dyes. Complex 3 gave the highest power conversion efficiency (η) of 3.19% when using nitrogen doped reduced graphene oxide nanosheets (NrGONS) as a catalyst at the counter electrode, and TiO2 containing rGONS at the anode. The value obtained is close to 3.8% obtained when using Pt catalyst instead of NrGONS at the cathode, thus confirming that NrGONS is a promising candidate to replace the more expensive Pt. The study also shows that placing rGONS on both the anode and cathode improves efficiency. In the second set, DSSCs were fabricated by using 2(3,5-biscarboxyphenoxy), 9(10), 16(17), 23(24)-tri(tertbutyl) phthalocyaninato Cu (4) and Zn (5) complexes as dyes on the ITO-TiO2 photoanodes containing reduced graphene oxide nanosheets (rGONS) or nitrogen-doped rGONS (NrGONS). The evaluation of the assembled DSSCs revealed that using ITO-TiO2-NrGONS-CuPc (4) photoanode had the highest fill factor (FF) and power conversion efficiency (ɳ) of 69 % and 4.36 % respectively. These results show that the asymmetrical phthalocyanine complexes (4) and (5) showed significant improvement on the performance of the DSSC compared to previous work on symmetrical carboxylated phthalocyanines with ɳ = 3.19%.
- Full Text:
- Date Issued: 2020
BODIPY dyes for singlet oxygen and optical limiting applications
- Authors: Harris, Jessica
- Date: 2018
- Subjects: Photosensitizing compounds , Active oxygen -- Physiological effect , Photochemotherapy , Cancer -- Treatment , Nonlinear optics , BODIPY (Boron-dipyrromethene)
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/58002 , vital:27014
- Description: A series of structurally related BODIPY dyes were synthesised and characterised. Their photophysical properties were studied in order to determine whether they would be suitable candidates for use as photosensitisers in the photodynamic therapy (PDT) treatment of cancer. The synthesis of two highly fluorescent BODIPY cores was achieved via the acid-catalysed condensation of a pyrrole and a functionalised aldehyde. In order to promote intersystem crossing, and hence improve the singlet oxygen generation of these dyes, bromine atoms were added at the 2,6-positions of the BODIPY core. These dibrominated analogues showed good singlet oxygen quantum yields, and excellent photostability in ethanol. In order to red-shift the main spectral bands of the BODIPY dyes towards the therapeutic window, vinyl/ styryl groups were introduced at the 3-, 5-, and 7-positions via a modified Knoevengal condensation reaction. The addition of vinyl/ styryl groups to the BODIPY core caused an increase in fluorescence quantum yield as well as a decrease in singlet oxygen quantum yield with respect to the dibrominated analogues. However, two of the red-shifted BODIPY dyes still showed moderate singlet oxygen quantum yields. The use of BODIPY dyes in nonlinear optics (NLO) was explored. The nonlinear optical characterisations and optical limiting properties of a series of 3,5-dithienylenevinylene BODIPY dyes were studied, both in dimethylformamide (DMF) solution and when embedded in poly(bisphenol A carbonate) (PBC) as thin films. The 3,5-dithienylenevinylene BODIPY dyes showed typical nonlinear absorption behaviour, with reverse saturable absorption (RSA) profiles, indicating that they have potential as optical limiters. The second-order hyperpolarizability (Y), and third-order nonlinear susceptibility (/m[/(3)]) values are also reported for these dyes. The optical limiting values of one of the BODIPY dyes in solution, and two of the BODIPY-embedded PBC films, were below the maximum threshold of 0.95 J-cm-2. The effect of addition of substituents on the electronic structure of the BODIPY dyes was investigated using TD-DFT calculations. The calculated trends closely followed those determined experimentally.
- Full Text:
- Date Issued: 2018
- Authors: Harris, Jessica
- Date: 2018
- Subjects: Photosensitizing compounds , Active oxygen -- Physiological effect , Photochemotherapy , Cancer -- Treatment , Nonlinear optics , BODIPY (Boron-dipyrromethene)
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/58002 , vital:27014
- Description: A series of structurally related BODIPY dyes were synthesised and characterised. Their photophysical properties were studied in order to determine whether they would be suitable candidates for use as photosensitisers in the photodynamic therapy (PDT) treatment of cancer. The synthesis of two highly fluorescent BODIPY cores was achieved via the acid-catalysed condensation of a pyrrole and a functionalised aldehyde. In order to promote intersystem crossing, and hence improve the singlet oxygen generation of these dyes, bromine atoms were added at the 2,6-positions of the BODIPY core. These dibrominated analogues showed good singlet oxygen quantum yields, and excellent photostability in ethanol. In order to red-shift the main spectral bands of the BODIPY dyes towards the therapeutic window, vinyl/ styryl groups were introduced at the 3-, 5-, and 7-positions via a modified Knoevengal condensation reaction. The addition of vinyl/ styryl groups to the BODIPY core caused an increase in fluorescence quantum yield as well as a decrease in singlet oxygen quantum yield with respect to the dibrominated analogues. However, two of the red-shifted BODIPY dyes still showed moderate singlet oxygen quantum yields. The use of BODIPY dyes in nonlinear optics (NLO) was explored. The nonlinear optical characterisations and optical limiting properties of a series of 3,5-dithienylenevinylene BODIPY dyes were studied, both in dimethylformamide (DMF) solution and when embedded in poly(bisphenol A carbonate) (PBC) as thin films. The 3,5-dithienylenevinylene BODIPY dyes showed typical nonlinear absorption behaviour, with reverse saturable absorption (RSA) profiles, indicating that they have potential as optical limiters. The second-order hyperpolarizability (Y), and third-order nonlinear susceptibility (/m[/(3)]) values are also reported for these dyes. The optical limiting values of one of the BODIPY dyes in solution, and two of the BODIPY-embedded PBC films, were below the maximum threshold of 0.95 J-cm-2. The effect of addition of substituents on the electronic structure of the BODIPY dyes was investigated using TD-DFT calculations. The calculated trends closely followed those determined experimentally.
- Full Text:
- Date Issued: 2018
Repurposing a polymer precursor scaffold for medicinal application: Synthesis, characterization and biological evaluation of ferrocenyl 1,3-benzoxazine derivatives as potential antiprotozoal and anticancer agents
- Authors: Mbaba, Mziyanda
- Date: 2020
- Subjects: Uncatalogued
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/164502 , vital:41124 , DOI 10.21504/10962/164502
- Description: The benzoxazines are a prominent class of heterocyclic compounds that possess a multitude of properties. To this end, benzoxazine derivatives have been used as versatile compounds for various utilities ranging from biological applications to the fabrication of polymers. Particularly, the 1,3-benzoxazine scaffold has featured in several bioactive compounds showing antimalarial, anticancer and antibacterial activities. Traditionally, it has been employed as a substrate in the synthesis of polymers with appealing physical and chemical properties. Due to the increasing interest in the polymer application of 1,3-benzoxazines, research of the 1,3-benzoxazine motif for polymer synthesis has been prioritized over other applications including its medicinal potential. The continuous development of resistance to clinical anticancer and antimalarial drugs has necessitated the need for the search of innovative bioactive compounds as potential alternative medicinal agents. To address this, the field of medicinal chemistry is adapting new approaches to counter resistance by incorporating nonconventional chemical moieties such as organometallic complexes, like ferrocene, into bioactive chemical motifs to serve as novel compounds with medicinal benefits. Incorporation of ferrocene into known bioactive chemical moieties has been shown to impart beneficial biological effects into the resultant compounds, which include the introduction of novel, and sometimes varied, mechanistic modalities and enhanced potency. Presented with the benefits of this strategy, the current work aims to design and evaluate the pharmaceutical capacity of novel derivatives containing 1,3-benzoxazine scaffold (traditionally applied in polymer synthesis) hybridized with the organometallic ferrocene unit as bioactive agents. Using a combination of expedient synthetic procedures such as the Burke three-component Mannich-type condensation, Vilsmeier-Haack formylation and reductive amination, four series of ferrocenyl 1,3-benzoxazine derivatives were synthesized and their structures confirmed by common spectroscopic techniques: nuclear magnetic resonance (NMR), infrared spectroscopy (IR) and high-resolution mass spectrometry (HRMS). The target compounds were evaluated in vitro for potential antimalarial and anticancer activities against strains of the malaria parasite (Plasmodium falciparum 3D7 and Dd2) and the triple-negative breast cancer cell line HCC70. Compounds exhibited higher potency towards the Plasmodium falciparum strains with IC50 values in the low and sub-micromolar range in comparison to the breast cancer cell line against for which mid-molar activities were observed. To gain insight into the possible mode of action of ferrocenyl 1,3-benzoxazines, representative compounds showing most efficacy from each series were assessed for DNA binding affinity by employing UV-Vis and fluorescence DNA titration experiments. The selected compounds were found to interact with the DNA by binding to the minor groove, and these findings were confirmed by in silico ligand docking studies using a B-DNA structure as the receptor. Compound 3.16c (IC50: 0.261 μM [3D7], 0.599 μM [Dd2], 11.0 μM [HCC70]), which emerged as the most promising compound, was found to induce DNA damage in HCC70 cancer cells when investigated for effects of DNA interaction. Additionally, compound 3.16c displayed a higher binding constant (Kb) against DNA isolated from 3D7 Plasmodium falciparum trophozoites (Kb = 1.88×106 M-1) than the mammalian DNA (Kb = 6.33×104 M-1) from calf thymus, thus explaining the preferred selectivity of the compounds for the malaria parasite. Moreover, the investigated compounds demonstrated binding affinity for synthetic hemozoin, β-hematin. Collectively, these data suggest that the compounds possess a dual mode of action for antimalarial activity involving DNA interaction and hemozoin inhibition. , Thesis (PhD) -- Faculty of Science, Chemistry, 2020
- Full Text:
- Date Issued: 2020
- Authors: Mbaba, Mziyanda
- Date: 2020
- Subjects: Uncatalogued
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/164502 , vital:41124 , DOI 10.21504/10962/164502
- Description: The benzoxazines are a prominent class of heterocyclic compounds that possess a multitude of properties. To this end, benzoxazine derivatives have been used as versatile compounds for various utilities ranging from biological applications to the fabrication of polymers. Particularly, the 1,3-benzoxazine scaffold has featured in several bioactive compounds showing antimalarial, anticancer and antibacterial activities. Traditionally, it has been employed as a substrate in the synthesis of polymers with appealing physical and chemical properties. Due to the increasing interest in the polymer application of 1,3-benzoxazines, research of the 1,3-benzoxazine motif for polymer synthesis has been prioritized over other applications including its medicinal potential. The continuous development of resistance to clinical anticancer and antimalarial drugs has necessitated the need for the search of innovative bioactive compounds as potential alternative medicinal agents. To address this, the field of medicinal chemistry is adapting new approaches to counter resistance by incorporating nonconventional chemical moieties such as organometallic complexes, like ferrocene, into bioactive chemical motifs to serve as novel compounds with medicinal benefits. Incorporation of ferrocene into known bioactive chemical moieties has been shown to impart beneficial biological effects into the resultant compounds, which include the introduction of novel, and sometimes varied, mechanistic modalities and enhanced potency. Presented with the benefits of this strategy, the current work aims to design and evaluate the pharmaceutical capacity of novel derivatives containing 1,3-benzoxazine scaffold (traditionally applied in polymer synthesis) hybridized with the organometallic ferrocene unit as bioactive agents. Using a combination of expedient synthetic procedures such as the Burke three-component Mannich-type condensation, Vilsmeier-Haack formylation and reductive amination, four series of ferrocenyl 1,3-benzoxazine derivatives were synthesized and their structures confirmed by common spectroscopic techniques: nuclear magnetic resonance (NMR), infrared spectroscopy (IR) and high-resolution mass spectrometry (HRMS). The target compounds were evaluated in vitro for potential antimalarial and anticancer activities against strains of the malaria parasite (Plasmodium falciparum 3D7 and Dd2) and the triple-negative breast cancer cell line HCC70. Compounds exhibited higher potency towards the Plasmodium falciparum strains with IC50 values in the low and sub-micromolar range in comparison to the breast cancer cell line against for which mid-molar activities were observed. To gain insight into the possible mode of action of ferrocenyl 1,3-benzoxazines, representative compounds showing most efficacy from each series were assessed for DNA binding affinity by employing UV-Vis and fluorescence DNA titration experiments. The selected compounds were found to interact with the DNA by binding to the minor groove, and these findings were confirmed by in silico ligand docking studies using a B-DNA structure as the receptor. Compound 3.16c (IC50: 0.261 μM [3D7], 0.599 μM [Dd2], 11.0 μM [HCC70]), which emerged as the most promising compound, was found to induce DNA damage in HCC70 cancer cells when investigated for effects of DNA interaction. Additionally, compound 3.16c displayed a higher binding constant (Kb) against DNA isolated from 3D7 Plasmodium falciparum trophozoites (Kb = 1.88×106 M-1) than the mammalian DNA (Kb = 6.33×104 M-1) from calf thymus, thus explaining the preferred selectivity of the compounds for the malaria parasite. Moreover, the investigated compounds demonstrated binding affinity for synthetic hemozoin, β-hematin. Collectively, these data suggest that the compounds possess a dual mode of action for antimalarial activity involving DNA interaction and hemozoin inhibition. , Thesis (PhD) -- Faculty of Science, Chemistry, 2020
- Full Text:
- Date Issued: 2020
Synthesis, characterization and host-guest complexes of supramolecular assemblies based on calixarenes and cucurbiturils
- Authors: Baa, Ebenezer
- Date: 2022-10-14
- Subjects: Supramolecular chemistry , Calixarenes , Cucurbiturils , Metal-organic frameworks , Macrocyclic compounds , Drug delivery systems
- Language: English
- Type: Academic theses , Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/365621 , vital:65765 , DOI https://doi.org/10.21504/10962/365621
- Description: The field of supramolecular chemistry has grown large and wide in both deepness of understanding, range of topics covered and scope and applications. Supramolecular self-assemblies are facilitated by a wide range of non-covalent intra and inter molecular interactions that range from hydrogen bonding to π-interaction and van der Waals. Macrocyclic compounds such as cucurbiturils and calixarenes have emerged as important classes of compounds with excellent potential of forming supramolecular assemblies. The porous nature of these compounds enables them to form host-guest supramolecular complexes stabilized by diverse range of non-covalent interactions. Furthermore, these compounds contain donor atoms capable of forming bonds with metal ions to yield metal complexes with interesting porous characteristics that deviate from their traditional hydrophobic cavity. The versatile nature of the resulting pores imply that they can accommodate diverse types of guests. This work explores the synthesis and characterization of a host of calixarenes and cucurbiturils. Self-assembly of these macrocycles with various metal ions results to the formation of porous metal organic framework (MOF) complexes. Four new calixarene typed compounds obtained from aromatic aldehydes and twenty-six cucurbituril metal complexes are reported. These macrocylces and their metal complexes also form supramolecular complexes with DMSO, methanol, isoniazid hydrochloride and ciprofloxacin hydrochlorides through either self-assembly, mechanochemistry and exposure to solvent vapors. The bulk materials have been characterized using nuclear magnetic resonance spectroscopy (NMR), Fourier transformed infrared spectroscopy (FTIR), powder and single crystal diffraction techniques and thermal studies thermogravimetric analysis (TGA) and differential thermal calorimetry (DSC). Data obtained from this study reveals that calixarenes can form supramolecular complexes with a frequently used laboratory solvents with BN22 showing appreciable selectivity for DMSO sorption from a solvent mixture. These compounds also form supramolecular complexes with drug molecules such as isoniazid and ciprofloxacin. Furthermore, the data reveals that choice of synthetic route of supramolecular ensembles dictates if the guest drug molecule will occupy the intrinsic or extrinsic pores of cucurbituril complexes. Biological studies on the obtained complexes reveal that the cucurbituril complexes are non-cytotoxic while the calixarenes show antibacterial activity against Escherichia coli and Staphylococcus aureus. Additionally, the study showed that ciprofloxacin can be successfully released from a calixarene host in a simulated body fluid although the host was also found to cross the dialysis membrane. The results of this study are important in that; - they can be exploited and developed in the selective sorption of certain guests and - that they can be used in the development of drug delivery systems that play a dual role of delivery and therapeutic activity. , Thesis (PhD) -- Faculty of Science, Chemistry, 2022
- Full Text:
- Date Issued: 2022-10-14
- Authors: Baa, Ebenezer
- Date: 2022-10-14
- Subjects: Supramolecular chemistry , Calixarenes , Cucurbiturils , Metal-organic frameworks , Macrocyclic compounds , Drug delivery systems
- Language: English
- Type: Academic theses , Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/365621 , vital:65765 , DOI https://doi.org/10.21504/10962/365621
- Description: The field of supramolecular chemistry has grown large and wide in both deepness of understanding, range of topics covered and scope and applications. Supramolecular self-assemblies are facilitated by a wide range of non-covalent intra and inter molecular interactions that range from hydrogen bonding to π-interaction and van der Waals. Macrocyclic compounds such as cucurbiturils and calixarenes have emerged as important classes of compounds with excellent potential of forming supramolecular assemblies. The porous nature of these compounds enables them to form host-guest supramolecular complexes stabilized by diverse range of non-covalent interactions. Furthermore, these compounds contain donor atoms capable of forming bonds with metal ions to yield metal complexes with interesting porous characteristics that deviate from their traditional hydrophobic cavity. The versatile nature of the resulting pores imply that they can accommodate diverse types of guests. This work explores the synthesis and characterization of a host of calixarenes and cucurbiturils. Self-assembly of these macrocycles with various metal ions results to the formation of porous metal organic framework (MOF) complexes. Four new calixarene typed compounds obtained from aromatic aldehydes and twenty-six cucurbituril metal complexes are reported. These macrocylces and their metal complexes also form supramolecular complexes with DMSO, methanol, isoniazid hydrochloride and ciprofloxacin hydrochlorides through either self-assembly, mechanochemistry and exposure to solvent vapors. The bulk materials have been characterized using nuclear magnetic resonance spectroscopy (NMR), Fourier transformed infrared spectroscopy (FTIR), powder and single crystal diffraction techniques and thermal studies thermogravimetric analysis (TGA) and differential thermal calorimetry (DSC). Data obtained from this study reveals that calixarenes can form supramolecular complexes with a frequently used laboratory solvents with BN22 showing appreciable selectivity for DMSO sorption from a solvent mixture. These compounds also form supramolecular complexes with drug molecules such as isoniazid and ciprofloxacin. Furthermore, the data reveals that choice of synthetic route of supramolecular ensembles dictates if the guest drug molecule will occupy the intrinsic or extrinsic pores of cucurbituril complexes. Biological studies on the obtained complexes reveal that the cucurbituril complexes are non-cytotoxic while the calixarenes show antibacterial activity against Escherichia coli and Staphylococcus aureus. Additionally, the study showed that ciprofloxacin can be successfully released from a calixarene host in a simulated body fluid although the host was also found to cross the dialysis membrane. The results of this study are important in that; - they can be exploited and developed in the selective sorption of certain guests and - that they can be used in the development of drug delivery systems that play a dual role of delivery and therapeutic activity. , Thesis (PhD) -- Faculty of Science, Chemistry, 2022
- Full Text:
- Date Issued: 2022-10-14
Design, synthesis, characterization and evaluation of Chitosan-based hydrogel for controlled drug delivery system
- Authors: Safari, Justin Bazibuhe
- Date: 2022-04
- Subjects: Chitosan , Drug delivery systems , Drugs Controlled release , Tenofovir , Colloids , Hepatitis B Chemotherapy , Hydrogel
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/232182 , vital:49969
- Description: Hepatitis B infection is a deadly infectious disease caused by the hepatitis B virus and is responsible for many deaths every year worldwide. Despite medication and vaccines against hepatitis B infection, it still presents high morbidity and mortality among populations. This is partly due to factors such as a long medication period of the existing treatments, resulting in poor patient compliance and leading to treatment failure. In addition, this situation can be responsible for the observed emerging drug resistance. Hence, novel drugs and drug delivery systems are needed to tackle this matter. Many strategies have been used to develop long-acting drug delivery systems treatment for several infectious diseases. Hydrogel drug delivery systems have shown interesting results as controlled drug delivery systems for several drugs. Therefore, the present study aimed to develop chitosan grafted poly (acrylamide-co-acrylic acid) hydrogel and apply it as a pH-sensitive controlled delivery system of tenofovir disoproxil fumarate (TDF). TDF is a nucleoside reverse transcriptase inhibitor used as first-line treatment of hepatitis B chronic infection and in the treatment of other viral infections. The free-radical polymerization method was utilized to modify chitosan by grafting acrylamide and acrylic acid and using N, N’-methylene bisacrylamide as the crosslinking agent to prepare the hydrogel, followed by an optimization of parameters that could affect the swelling capacity. The prepared chitosan-g-poly(acrylamide-co-acrylic acid) hydrogel was characterized using Fourier Transmission Infra-red spectroscopy (FTIR), X-Ray Diffraction (XRD), Thermal Gravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), Energy-dispersive X-ray spectroscopy (EDS), Scanning Electron Microscopy (SEM), and was evaluated for cytotoxicity using a HeLa cell assay. TDF was used as a drug model, it was loaded by the swelling equilibrium method, following by the investigation of the release profile of TDF-loaded hydrogel at pH 1.2 and 7.4. A successful synthesis of chitosan grafted poly(acrylamide-co-acrylic acid) hydrogel was confirmed by Fourier Transmission Infra-red spectroscopy (FTIR), X-Ray Diffraction Spectroscopy (XRD), Thermal Gravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), Energy-dispersive X-ray spectroscopy (EDS) and Scanning Electron Microscopy (SEM). Optimization results showed that the ratio of monomers impacted the swelling ratio of the hydrogel and both the concentration of the crosslinking agent, and the reaction initiator also affected the swelling ratio. The synthesized hydrogels were sensitive to pH and ionic strength. Hydrogel swelling was lower in acidic solutions and higher in neutral and basic solutions and decreased with the increasing ionic strength. Furthermore, SEM results revealed that hydrogel have a rough and fibrous surface structure with numerous pores. Cytotoxicity studies demonstrated that the hydrogel was non-cytotoxic at 50 μg/ml against HeLa cells which suggested a good biocompatibility of the material. TDF was loaded and released from the hydrogels and showed an encapsulation efficiency and drug loading percentage ranging from 81-96% and 8-10%, respectively. TDF release profile was found to be low in buffer solution of pH 1.2 (in the range of 5-10%) and much higher (38-53%) at pH 7.4 within 96 hours. TDF maintained its chemical integrity after release and the hydrogels can therefore be proposed as a new controlled-release drug delivery system for hepatitis B treatment. , Thesis (MSc) -- Faculty of Science, Chemistry, 2022
- Full Text:
- Date Issued: 2022-04
- Authors: Safari, Justin Bazibuhe
- Date: 2022-04
- Subjects: Chitosan , Drug delivery systems , Drugs Controlled release , Tenofovir , Colloids , Hepatitis B Chemotherapy , Hydrogel
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/232182 , vital:49969
- Description: Hepatitis B infection is a deadly infectious disease caused by the hepatitis B virus and is responsible for many deaths every year worldwide. Despite medication and vaccines against hepatitis B infection, it still presents high morbidity and mortality among populations. This is partly due to factors such as a long medication period of the existing treatments, resulting in poor patient compliance and leading to treatment failure. In addition, this situation can be responsible for the observed emerging drug resistance. Hence, novel drugs and drug delivery systems are needed to tackle this matter. Many strategies have been used to develop long-acting drug delivery systems treatment for several infectious diseases. Hydrogel drug delivery systems have shown interesting results as controlled drug delivery systems for several drugs. Therefore, the present study aimed to develop chitosan grafted poly (acrylamide-co-acrylic acid) hydrogel and apply it as a pH-sensitive controlled delivery system of tenofovir disoproxil fumarate (TDF). TDF is a nucleoside reverse transcriptase inhibitor used as first-line treatment of hepatitis B chronic infection and in the treatment of other viral infections. The free-radical polymerization method was utilized to modify chitosan by grafting acrylamide and acrylic acid and using N, N’-methylene bisacrylamide as the crosslinking agent to prepare the hydrogel, followed by an optimization of parameters that could affect the swelling capacity. The prepared chitosan-g-poly(acrylamide-co-acrylic acid) hydrogel was characterized using Fourier Transmission Infra-red spectroscopy (FTIR), X-Ray Diffraction (XRD), Thermal Gravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), Energy-dispersive X-ray spectroscopy (EDS), Scanning Electron Microscopy (SEM), and was evaluated for cytotoxicity using a HeLa cell assay. TDF was used as a drug model, it was loaded by the swelling equilibrium method, following by the investigation of the release profile of TDF-loaded hydrogel at pH 1.2 and 7.4. A successful synthesis of chitosan grafted poly(acrylamide-co-acrylic acid) hydrogel was confirmed by Fourier Transmission Infra-red spectroscopy (FTIR), X-Ray Diffraction Spectroscopy (XRD), Thermal Gravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), Energy-dispersive X-ray spectroscopy (EDS) and Scanning Electron Microscopy (SEM). Optimization results showed that the ratio of monomers impacted the swelling ratio of the hydrogel and both the concentration of the crosslinking agent, and the reaction initiator also affected the swelling ratio. The synthesized hydrogels were sensitive to pH and ionic strength. Hydrogel swelling was lower in acidic solutions and higher in neutral and basic solutions and decreased with the increasing ionic strength. Furthermore, SEM results revealed that hydrogel have a rough and fibrous surface structure with numerous pores. Cytotoxicity studies demonstrated that the hydrogel was non-cytotoxic at 50 μg/ml against HeLa cells which suggested a good biocompatibility of the material. TDF was loaded and released from the hydrogels and showed an encapsulation efficiency and drug loading percentage ranging from 81-96% and 8-10%, respectively. TDF release profile was found to be low in buffer solution of pH 1.2 (in the range of 5-10%) and much higher (38-53%) at pH 7.4 within 96 hours. TDF maintained its chemical integrity after release and the hydrogels can therefore be proposed as a new controlled-release drug delivery system for hepatitis B treatment. , Thesis (MSc) -- Faculty of Science, Chemistry, 2022
- Full Text:
- Date Issued: 2022-04
Synthesis, characterisation and electrocatalytic behaviour of three series of Metal Organic Frameworks
- Authors: Murinzi, Tafadzwa Wendy
- Date: 2020
- Subjects: Electrochemistry , Metal-organic frameworks , Polyoxometalates , Fourier transform infrared spectroscopy , Electrocatalysis , Cysteine
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/167598 , vital:41495
- Description: Metal organic frameworks (MOFs) have received a lot of attention over the past few years due to their vast range of interesting properties and applications, such as catalysis, environmental sensing and storage. This wide range of potential applications is afforded by careful selection and manipulation of the components chosen in assembling of MOFs. In this study, three series of MOFs were synthesized from Co(II), Cu(II) and Mo(VI) polyoxometallates with either 1,3,5-benzenetricarboxylic acid, 1,2,4,5-benzenetetracarboxylic acid or 2,6- pyridinedicarboxylic acid as the ligands. In series 1, the common 1,3,5- benzenetricarboxylic acid MOF, HKUST-1, and POM modified HKUST-1 compounds involving encapsulation and encorporation of the POM were utilised. In series 2, flexible cobalt(II) benzenepolycarboxylate MOFs which investigated the effect of varying the degree of carboxylate substituent were utilised. In series 3, flexibly reduced heterocyclic polycarboxylate MOFs using 2,6-pyridine dicarboxylate were utilised. Solvothermal and slow evaporation synthesis conditions were employed. Where single crystals of good quality were produced, single crystal X-ray diffraction (SC-XRD) was employed for structural elucidation. In the absence of such crystals, a combination of elemental analysis, inductively coupled plasma optical emission spectrometry (ICP-OES) and powder X-ray diffraction (PXRD) was used. Characterization of the MOFs was done by Fourier transform infrared spectrometry (FTIR) and thermal methods, namely thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The electrocatalytic potential of the compounds in the oxidation of L-cysteine was then investigated using a variety of techniques. Cyclic voltammetry was used for L-cysteine detection whilst chronoamperometry and differential pulse voltammetry were used to determine the nanoprobes’ sensitivity, rate constants and detection limits. Electrochemical impedence spectroscopy was used to investigate the charge transfer resistance (RCT) and electron transfer kinetics. Of the three, series 3 gave the best signals and sensitivities for electrocatalysis of L-cysteine followed by series 2 and lastly series 1. Series 2 showed the highest stability and series 1 required the least overpotential. The results highlight the effects of different metal centres and ligands on electrocatalysis. The application of MOFs in electrochemistry is a relatively new field making the findings of this study a significant addition to the body of knowledge.
- Full Text:
- Date Issued: 2020
- Authors: Murinzi, Tafadzwa Wendy
- Date: 2020
- Subjects: Electrochemistry , Metal-organic frameworks , Polyoxometalates , Fourier transform infrared spectroscopy , Electrocatalysis , Cysteine
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/167598 , vital:41495
- Description: Metal organic frameworks (MOFs) have received a lot of attention over the past few years due to their vast range of interesting properties and applications, such as catalysis, environmental sensing and storage. This wide range of potential applications is afforded by careful selection and manipulation of the components chosen in assembling of MOFs. In this study, three series of MOFs were synthesized from Co(II), Cu(II) and Mo(VI) polyoxometallates with either 1,3,5-benzenetricarboxylic acid, 1,2,4,5-benzenetetracarboxylic acid or 2,6- pyridinedicarboxylic acid as the ligands. In series 1, the common 1,3,5- benzenetricarboxylic acid MOF, HKUST-1, and POM modified HKUST-1 compounds involving encapsulation and encorporation of the POM were utilised. In series 2, flexible cobalt(II) benzenepolycarboxylate MOFs which investigated the effect of varying the degree of carboxylate substituent were utilised. In series 3, flexibly reduced heterocyclic polycarboxylate MOFs using 2,6-pyridine dicarboxylate were utilised. Solvothermal and slow evaporation synthesis conditions were employed. Where single crystals of good quality were produced, single crystal X-ray diffraction (SC-XRD) was employed for structural elucidation. In the absence of such crystals, a combination of elemental analysis, inductively coupled plasma optical emission spectrometry (ICP-OES) and powder X-ray diffraction (PXRD) was used. Characterization of the MOFs was done by Fourier transform infrared spectrometry (FTIR) and thermal methods, namely thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The electrocatalytic potential of the compounds in the oxidation of L-cysteine was then investigated using a variety of techniques. Cyclic voltammetry was used for L-cysteine detection whilst chronoamperometry and differential pulse voltammetry were used to determine the nanoprobes’ sensitivity, rate constants and detection limits. Electrochemical impedence spectroscopy was used to investigate the charge transfer resistance (RCT) and electron transfer kinetics. Of the three, series 3 gave the best signals and sensitivities for electrocatalysis of L-cysteine followed by series 2 and lastly series 1. Series 2 showed the highest stability and series 1 required the least overpotential. The results highlight the effects of different metal centres and ligands on electrocatalysis. The application of MOFs in electrochemistry is a relatively new field making the findings of this study a significant addition to the body of knowledge.
- Full Text:
- Date Issued: 2020
The construction of phthalocyanine- carbon nanoparticle conjugates for applications in photodynamic therapy and non-linear optics
- Matshitse, Refilwe Manyama Stephina
- Authors: Matshitse, Refilwe Manyama Stephina
- Date: 2021-10-29
- Subjects: Phthalocyanines , Nanodiamonds , Photochemotherapy , Nonlinear optics , Quantum dots
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/188397 , vital:44750 , 10.21504/10962/188397
- Description: The syntheses and characterization of symmetric and asymmetric Pcs functionalized at the peripheral position and sometimes positively charged are reported. The Pcs had either H2, zinc or silicon as central metals and have pyridyloxy, benzothiozole phenoxy, and respective cationic analogues as ring substituents. The Pcs were linked to carbon based nanoparticles such as graphene quantum dots, carbon dots, and detonation nanodiamonds (DNDs) via an ester, amide bond and/or π - π stacking. The physicochemical characteristics of the Pcs were assessed when alone and when in a conjugated system. Both symmetrically and asymmetrically substituted benzothiozole Pcs when quaternised displayed higher triplet and singlet oxygen quantum yields than their unquaternised counterparts. Linkage to carbon nanoparticles (especially to detonation nanodiamonds) had an increasing effect on triplet and singlet oxygen quantum yield. However, a general decrease in singlet oxygen quantum yield on linkage to doped detonation nanodiamonds was associated with the screening effect of DNDs. Heteroatom doped DNDs-Pc nanohybrids have less singlet oxygen than Pcs alone due to molecular structural stability associated with strain that is relatively reduced upon linking Pcs. The In vitro dark cytotoxicity and photodynamic therapy of selected Pc complexes and conjugates against MCF-7 cells was tested. All studied Pc complexes and conjugates showed minimum dark toxicity making them applicable for PDT. When Pc complexes are alone, there is less phototoxicity with >22% cell viability at concentrations ≤ 50 μg/mL relative to conjugates with <22% cell viability at concentrations ≤ 50 μg/mL. There was no direct relationship between PDT and singlet oxygen quantum yields. Nonlinear optical characteristics of complexes was improved upon conjugation of DNDs. Absorbance, input energy, percentage loading, central metal, substituent of Pc and nature of interaction (covalent, noncovalent) are amongst some of the factors that influence nonlinear absorption properties of materials used in this study. All materials followed reverse saturable absorption through two photon absorption mechanism at the excitation wavelength of 532 nm. Aggregates reduce excited state lifetime and Beff under high concentrations/absorbance. A direct relationship between absorbance and Beff of DNDs nanoconjugated systems at low concentrations result in increased optical limiting characteristics of materials. The findings from this work show the importance of linking (nonlinear optics and photodynamic therapy) and doping (photodynamic therapy) photosensitisers such as phthalocyanines and sometimes boron dipyrromethenes onto carbon based nanoparticles for the enhanced characteristics in variable applications. , Thesis (PhD) -- Faculty of Science, Chemistry, 2021
- Full Text:
- Date Issued: 2021-10-29
- Authors: Matshitse, Refilwe Manyama Stephina
- Date: 2021-10-29
- Subjects: Phthalocyanines , Nanodiamonds , Photochemotherapy , Nonlinear optics , Quantum dots
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/188397 , vital:44750 , 10.21504/10962/188397
- Description: The syntheses and characterization of symmetric and asymmetric Pcs functionalized at the peripheral position and sometimes positively charged are reported. The Pcs had either H2, zinc or silicon as central metals and have pyridyloxy, benzothiozole phenoxy, and respective cationic analogues as ring substituents. The Pcs were linked to carbon based nanoparticles such as graphene quantum dots, carbon dots, and detonation nanodiamonds (DNDs) via an ester, amide bond and/or π - π stacking. The physicochemical characteristics of the Pcs were assessed when alone and when in a conjugated system. Both symmetrically and asymmetrically substituted benzothiozole Pcs when quaternised displayed higher triplet and singlet oxygen quantum yields than their unquaternised counterparts. Linkage to carbon nanoparticles (especially to detonation nanodiamonds) had an increasing effect on triplet and singlet oxygen quantum yield. However, a general decrease in singlet oxygen quantum yield on linkage to doped detonation nanodiamonds was associated with the screening effect of DNDs. Heteroatom doped DNDs-Pc nanohybrids have less singlet oxygen than Pcs alone due to molecular structural stability associated with strain that is relatively reduced upon linking Pcs. The In vitro dark cytotoxicity and photodynamic therapy of selected Pc complexes and conjugates against MCF-7 cells was tested. All studied Pc complexes and conjugates showed minimum dark toxicity making them applicable for PDT. When Pc complexes are alone, there is less phototoxicity with >22% cell viability at concentrations ≤ 50 μg/mL relative to conjugates with <22% cell viability at concentrations ≤ 50 μg/mL. There was no direct relationship between PDT and singlet oxygen quantum yields. Nonlinear optical characteristics of complexes was improved upon conjugation of DNDs. Absorbance, input energy, percentage loading, central metal, substituent of Pc and nature of interaction (covalent, noncovalent) are amongst some of the factors that influence nonlinear absorption properties of materials used in this study. All materials followed reverse saturable absorption through two photon absorption mechanism at the excitation wavelength of 532 nm. Aggregates reduce excited state lifetime and Beff under high concentrations/absorbance. A direct relationship between absorbance and Beff of DNDs nanoconjugated systems at low concentrations result in increased optical limiting characteristics of materials. The findings from this work show the importance of linking (nonlinear optics and photodynamic therapy) and doping (photodynamic therapy) photosensitisers such as phthalocyanines and sometimes boron dipyrromethenes onto carbon based nanoparticles for the enhanced characteristics in variable applications. , Thesis (PhD) -- Faculty of Science, Chemistry, 2021
- Full Text:
- Date Issued: 2021-10-29
Metallophthalocyanines linked to metal nanoparticles and folic acid for use in photodynamic therapy of cancer and photoinactivation of bacterial microorganisms.
- Authors: Matlou, Gauta Gold
- Date: 2020
- Subjects: Cancer -- Photochemotherapy , Nanoparticles , Phthalocyanines , Anti-infective agents -- Therapeutic use , Photochemotherapy , Photochemistry
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/166540 , vital:41377
- Description: This thesis presents on the synthesis and characterization of novel asymmetric and symmetrical metallophthalocyanines (MPcs) substituted with carboxylic acid functional groups and centrally metallated with zinc and indium. The MPcs are further covalently linked to cysteine capped silver nanoparticles (cys-AgNPs), amino functionalized magnetic nanoparticles (AMNPs) and folic acid (FA) through an amide bond between the carboxylic group of MPcs and the amino group of FA, cys-AgNPs or AMNPs. The covalent linkage of MPcs to FA improved the water solubility of MPcs and allowed for singlet oxygen quantum yield determination in water. Asymmetric MPcs and their conjugates were found to have improved photochemical and photophysical properties compared to symmetrical MPcs and their conjugates. The heavy atom effect of AMNPs and AgNPs improved the triplet and singlet oxygen quantum yields of MPcs. MPcs and their conjugates (MPc-FA, MPc-AMNPs, MPc-AgNPs) were found to have lower in vitro dark cytotoxicity and higher photodynamic therapy (PDT) activity on MCF-7 breast cancer cells. The water soluble MPc-FA had better PDT activity when compared to MPc-AMNPs due to the active targeting of folic acid-folate binding on cancer cell surface. MPcs and MPc-AgNPs conjugates also showed excellent in vitro cytotoxicity on S. aureus under light irradiation compared to dark cytotoxicity. The photosensitizing properties of MPcs and their conjugates are demonstrated for the first time in this thesis, both on breast cancer cells (MCF-7) through photodynamic therapy and on microorganisms (S. aureus) through photodynamic antimicrobial chemotherapy.
- Full Text:
- Date Issued: 2020
- Authors: Matlou, Gauta Gold
- Date: 2020
- Subjects: Cancer -- Photochemotherapy , Nanoparticles , Phthalocyanines , Anti-infective agents -- Therapeutic use , Photochemotherapy , Photochemistry
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/166540 , vital:41377
- Description: This thesis presents on the synthesis and characterization of novel asymmetric and symmetrical metallophthalocyanines (MPcs) substituted with carboxylic acid functional groups and centrally metallated with zinc and indium. The MPcs are further covalently linked to cysteine capped silver nanoparticles (cys-AgNPs), amino functionalized magnetic nanoparticles (AMNPs) and folic acid (FA) through an amide bond between the carboxylic group of MPcs and the amino group of FA, cys-AgNPs or AMNPs. The covalent linkage of MPcs to FA improved the water solubility of MPcs and allowed for singlet oxygen quantum yield determination in water. Asymmetric MPcs and their conjugates were found to have improved photochemical and photophysical properties compared to symmetrical MPcs and their conjugates. The heavy atom effect of AMNPs and AgNPs improved the triplet and singlet oxygen quantum yields of MPcs. MPcs and their conjugates (MPc-FA, MPc-AMNPs, MPc-AgNPs) were found to have lower in vitro dark cytotoxicity and higher photodynamic therapy (PDT) activity on MCF-7 breast cancer cells. The water soluble MPc-FA had better PDT activity when compared to MPc-AMNPs due to the active targeting of folic acid-folate binding on cancer cell surface. MPcs and MPc-AgNPs conjugates also showed excellent in vitro cytotoxicity on S. aureus under light irradiation compared to dark cytotoxicity. The photosensitizing properties of MPcs and their conjugates are demonstrated for the first time in this thesis, both on breast cancer cells (MCF-7) through photodynamic therapy and on microorganisms (S. aureus) through photodynamic antimicrobial chemotherapy.
- Full Text:
- Date Issued: 2020
Photosensitizer, pH sensing and optical limiting properties of BODIPY dyes
- Authors: May, Aviwe Khanya
- Date: 2018
- Subjects: Dyes and dyeing -- Chemistry , Halogenation , Photochemotherapy , Bromination , Photosensitizing compounds , Nonlinear optics , BODIPY dyes
- Language: English
- Type: text , Thesis , Masters , MA
- Identifier: http://hdl.handle.net/10962/63964 , vital:28515
- Description: A series of BODIPY dyes have been successfully synthesised and structurally characterised to examine the effect of halogenation at the 2,6-positions and the introduction of styryl and vinylene groups at the 3,5-positions. The photophysical properties were studied, to assess the effect of the enhancement of the rate of intersystem crossing through halogenation on the fluorescence properties and the generation of reactive oxygen species. This is important in the assessment of the suitability of applying these molecules as photosensitizer dyes for photodynamic therapy and photodynamic antimicrobial chemotherapy. Upon bromination, the dyes showed moderately high singlet oxygen quantum yields. The inclusion of BODIPY dyes into cyclodextrins was explored since it makes them water soluble and hence suitable for biomedical applications, but no singlet oxygen was detected in aqueous media for the inclusion complexes. In order to red-shift the main spectral band of the BODIPY dyes into the therapeutic window, styryl groups were introduced at the 3,5-positions via a modified Knoevenagel condensation reaction. Since the main spectral band lies well above 532 nm, the second harmonic of the Nd:YAG laser, there is relatively weak absorbance at this wavelength. The 3,5-distyryl and 3,5-divinylene BODIPY dyes were assessed for their potential utility for application in nonlinear optics (NLO), and they demonstrated typical nonlinear absorption behaviour characterised by reverse saturable absorption (RSA) in z-scan measurements. Furthermore, the dyes possess excellent optical limiting parameters, such as their third-order suspectibility and hyperpolarizability values, in a wide range of solvents. One dye containing dimethylamino moieties on styryl groups attached at the 3,5-positions was assessed for potential application as an on/off fluorescence sensor. The dye proved to be successful, since intramolecular charge transfer in the S1 state was eliminated in the presence of acid and this results in a fluorescence “turn on” effect. This process was found to be reversible with the addition of a base.
- Full Text:
- Date Issued: 2018
- Authors: May, Aviwe Khanya
- Date: 2018
- Subjects: Dyes and dyeing -- Chemistry , Halogenation , Photochemotherapy , Bromination , Photosensitizing compounds , Nonlinear optics , BODIPY dyes
- Language: English
- Type: text , Thesis , Masters , MA
- Identifier: http://hdl.handle.net/10962/63964 , vital:28515
- Description: A series of BODIPY dyes have been successfully synthesised and structurally characterised to examine the effect of halogenation at the 2,6-positions and the introduction of styryl and vinylene groups at the 3,5-positions. The photophysical properties were studied, to assess the effect of the enhancement of the rate of intersystem crossing through halogenation on the fluorescence properties and the generation of reactive oxygen species. This is important in the assessment of the suitability of applying these molecules as photosensitizer dyes for photodynamic therapy and photodynamic antimicrobial chemotherapy. Upon bromination, the dyes showed moderately high singlet oxygen quantum yields. The inclusion of BODIPY dyes into cyclodextrins was explored since it makes them water soluble and hence suitable for biomedical applications, but no singlet oxygen was detected in aqueous media for the inclusion complexes. In order to red-shift the main spectral band of the BODIPY dyes into the therapeutic window, styryl groups were introduced at the 3,5-positions via a modified Knoevenagel condensation reaction. Since the main spectral band lies well above 532 nm, the second harmonic of the Nd:YAG laser, there is relatively weak absorbance at this wavelength. The 3,5-distyryl and 3,5-divinylene BODIPY dyes were assessed for their potential utility for application in nonlinear optics (NLO), and they demonstrated typical nonlinear absorption behaviour characterised by reverse saturable absorption (RSA) in z-scan measurements. Furthermore, the dyes possess excellent optical limiting parameters, such as their third-order suspectibility and hyperpolarizability values, in a wide range of solvents. One dye containing dimethylamino moieties on styryl groups attached at the 3,5-positions was assessed for potential application as an on/off fluorescence sensor. The dye proved to be successful, since intramolecular charge transfer in the S1 state was eliminated in the presence of acid and this results in a fluorescence “turn on” effect. This process was found to be reversible with the addition of a base.
- Full Text:
- Date Issued: 2018
Photocatalysis of 4-chloro and 4-nonylphenols using novel symmetric phthalocyanines and asymmetric porphyrin supported on polyacrylonitrite nanofibres
- Authors: Jones, Benjamin Martin
- Date: 2020
- Subjects: Nanoparticles , Phthalocyanines , Electrospinning , Porphyrins , Nanofibers , Photocatalysis , Photocatalysis -- Environmental aspects
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/164770 , vital:41163
- Description: This work explores the synthesis and characterisation of novel symmetrical phthalocyanines and novel asymmetric porphyrins that have been embedded or linked respectively,and electrospun into fibres for application in the photocatalysis of environmental pollutants. The phthalocyanines contain pyrrole moieties without hetero atom linkers to maintain a rigid structure. The porphyrin contains a carboxy moiety utilized to construct an amide bond between the complex and the polymer prior to the spinning process. The new compounds were characterized by elemental analyses, proton nuclear magnetic resonance (HNMR)Fourier-transform infrared spectroscopy (FTIR), MALDI-TOF and UV-vis spectroscopy. The general trends of fluorescence, triplet and singlet oxygen quantum yields are described as well as their appropriate lifetimes. The photocatalytic activity of phthalocyanine embedded fibres were compared against those that had been dyed. Unfortunately, during the degradation process, the dyed fibres leeched compound and the studies could not be continued. It was seen that the porphyrin fibres linked to the polymer showed the most efficient photocatalytic activity against 4-cholorphenol and 4-nonylphenol due to irradiation at lower wavelengths consequently having higher frequencies and transferring more energy.
- Full Text:
- Date Issued: 2020
- Authors: Jones, Benjamin Martin
- Date: 2020
- Subjects: Nanoparticles , Phthalocyanines , Electrospinning , Porphyrins , Nanofibers , Photocatalysis , Photocatalysis -- Environmental aspects
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/164770 , vital:41163
- Description: This work explores the synthesis and characterisation of novel symmetrical phthalocyanines and novel asymmetric porphyrins that have been embedded or linked respectively,and electrospun into fibres for application in the photocatalysis of environmental pollutants. The phthalocyanines contain pyrrole moieties without hetero atom linkers to maintain a rigid structure. The porphyrin contains a carboxy moiety utilized to construct an amide bond between the complex and the polymer prior to the spinning process. The new compounds were characterized by elemental analyses, proton nuclear magnetic resonance (HNMR)Fourier-transform infrared spectroscopy (FTIR), MALDI-TOF and UV-vis spectroscopy. The general trends of fluorescence, triplet and singlet oxygen quantum yields are described as well as their appropriate lifetimes. The photocatalytic activity of phthalocyanine embedded fibres were compared against those that had been dyed. Unfortunately, during the degradation process, the dyed fibres leeched compound and the studies could not be continued. It was seen that the porphyrin fibres linked to the polymer showed the most efficient photocatalytic activity against 4-cholorphenol and 4-nonylphenol due to irradiation at lower wavelengths consequently having higher frequencies and transferring more energy.
- Full Text:
- Date Issued: 2020