A bitcoin framework : an alternative payment system for marginalized areas of South Africa using low-end mobile phones
- Authors: Dlamini, Nelisiwe Peaceness
- Date: 2016
- Subjects: Electronic funds transfers -- South Africa Bitcoin -- South Africa Mobile commerce -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10353/11884 , vital:39115
- Description: The emergence of the cryptocurrency Bitcoin, has invoked the need for developing financial systems that can be used to transfer digital value. This would serve as a solution to developing countries especially the challenged ones, when it comes to accommodating the financial needs of the disadvantaged people. Moreover, it facilitates access to financial services to allow them to transact with ease. Numerous companies have taken advantage of the prevalence of mobile phones and introduced financial platforms to provide financial inclusion to disadvantaged people. Financial institutions and Mobile Network Operators (MNO) have developed platforms such as cell phone banking services, mobile money, mobile wallets, and electronic wallets that can be used to provide affordable financial services. Although this is the case, alternative platforms that are affordable and accessible through mobile phones are still required. Therefore, this study proposes a Bitcoin framework that can be used as an alternative platform through low-end mobile phones to provide access to financial services to the disadvantaged people in marginalized areas. To prove the concept of the proposed Bitcoin framework, a Mobile Bitcoin Wallet System (MBWS) prototype was developed, which allows a person using a low-end mobile phone with no intervening technology such as Internet or Bluetooth, to access a Bitcoin wallet by sending a Short Message Service (SMS). This enables Bitcoin to be accessed more easily and affordably by the people. Thus the developed prototype conceptualizes an alternative payment system or a payment method that can augment the existing payment methods. The MBWS is evaluated to assess if it can offer the services that other platforms offer by being compared to a cell-phone banking service. It was deployed on a computer connected to the Internet to enable a connection to the Bitcoin network and access to the blockchain which records all the transactions that take place in Bitcoin. Although this system provides access to the Bitcoin wallet, for it to be applied to areas where people require an alternative payment system, it still needs to be enhanced for such use. This includes scaling the system and adding more functions to it.
- Full Text:
- Date Issued: 2016
- Authors: Dlamini, Nelisiwe Peaceness
- Date: 2016
- Subjects: Electronic funds transfers -- South Africa Bitcoin -- South Africa Mobile commerce -- South Africa
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10353/11884 , vital:39115
- Description: The emergence of the cryptocurrency Bitcoin, has invoked the need for developing financial systems that can be used to transfer digital value. This would serve as a solution to developing countries especially the challenged ones, when it comes to accommodating the financial needs of the disadvantaged people. Moreover, it facilitates access to financial services to allow them to transact with ease. Numerous companies have taken advantage of the prevalence of mobile phones and introduced financial platforms to provide financial inclusion to disadvantaged people. Financial institutions and Mobile Network Operators (MNO) have developed platforms such as cell phone banking services, mobile money, mobile wallets, and electronic wallets that can be used to provide affordable financial services. Although this is the case, alternative platforms that are affordable and accessible through mobile phones are still required. Therefore, this study proposes a Bitcoin framework that can be used as an alternative platform through low-end mobile phones to provide access to financial services to the disadvantaged people in marginalized areas. To prove the concept of the proposed Bitcoin framework, a Mobile Bitcoin Wallet System (MBWS) prototype was developed, which allows a person using a low-end mobile phone with no intervening technology such as Internet or Bluetooth, to access a Bitcoin wallet by sending a Short Message Service (SMS). This enables Bitcoin to be accessed more easily and affordably by the people. Thus the developed prototype conceptualizes an alternative payment system or a payment method that can augment the existing payment methods. The MBWS is evaluated to assess if it can offer the services that other platforms offer by being compared to a cell-phone banking service. It was deployed on a computer connected to the Internet to enable a connection to the Bitcoin network and access to the blockchain which records all the transactions that take place in Bitcoin. Although this system provides access to the Bitcoin wallet, for it to be applied to areas where people require an alternative payment system, it still needs to be enhanced for such use. This includes scaling the system and adding more functions to it.
- Full Text:
- Date Issued: 2016
A comparative analysis of mobile application development frameworks: A case study of mobile application development for water usage management in Alice and Fort Beaufort communities
- Authors: Manu, Kwabena
- Date: 2019
- Subjects: Mobile communication systems Cell phones Cloud computing
- Language: English
- Type: Thesis , Masters , MSc. (Computer Science)
- Identifier: http://hdl.handle.net/10353/14130 , vital:39853
- Description: Mobile phones have become an integral part of standard of living. Users and customers expect sensible and very useful applications in less time. In this competitive market, it is an enormous challenge to develop high performance mobile applications that might meet the expectations of end users. Despite the fact that development of new applications for each mobile operating system in short time is fairly an issue, mobile operating systems vendors are giving their best available resources for creating applications in additional convenient ways. These days, there is a common tendency to look for less complex and quicker solutions that could be used in the process of software development. Developers of a new mobile application have to undertake variety of selections and decisions, including the target platform as well as the development technology to utilize. Mobile application development frameworks contribute in solving this problem. Several frameworks have emerged, which we classify and evaluate their appropriateness. In order to compare existing development frameworks solutions in this research, we compiled a set of criteria to assess mobile application development approaches. In view on these criteria, we evaluated five frameworks that is, PhoneGap, Xamarin, App Inventor, Sencha Touch and DragonRad. For proof of concepts, the chosen framework from the five evaluated mobile development frameworks was used to develop application for water usage management. The research will equip mobile application developers to gain more insight into mobile development frameworks available, therefore helping them to choose the most appropriate framework for their project.
- Full Text:
- Date Issued: 2019
- Authors: Manu, Kwabena
- Date: 2019
- Subjects: Mobile communication systems Cell phones Cloud computing
- Language: English
- Type: Thesis , Masters , MSc. (Computer Science)
- Identifier: http://hdl.handle.net/10353/14130 , vital:39853
- Description: Mobile phones have become an integral part of standard of living. Users and customers expect sensible and very useful applications in less time. In this competitive market, it is an enormous challenge to develop high performance mobile applications that might meet the expectations of end users. Despite the fact that development of new applications for each mobile operating system in short time is fairly an issue, mobile operating systems vendors are giving their best available resources for creating applications in additional convenient ways. These days, there is a common tendency to look for less complex and quicker solutions that could be used in the process of software development. Developers of a new mobile application have to undertake variety of selections and decisions, including the target platform as well as the development technology to utilize. Mobile application development frameworks contribute in solving this problem. Several frameworks have emerged, which we classify and evaluate their appropriateness. In order to compare existing development frameworks solutions in this research, we compiled a set of criteria to assess mobile application development approaches. In view on these criteria, we evaluated five frameworks that is, PhoneGap, Xamarin, App Inventor, Sencha Touch and DragonRad. For proof of concepts, the chosen framework from the five evaluated mobile development frameworks was used to develop application for water usage management. The research will equip mobile application developers to gain more insight into mobile development frameworks available, therefore helping them to choose the most appropriate framework for their project.
- Full Text:
- Date Issued: 2019
A comparative economic analysis of small scale tobacco production under contract and non-contract farming : the case of Marondera rural district, Mashonaland East province, Zimbabwe
- Authors: Ruzhani, Freddy
- Date: 2015
- Subjects: Farms, Small -- Zimbabwe Tobacco industry -- Zimbabwe Farmers -- Zimbabwe
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10353/12653 , vital:39296
- Description: Constitutionalism and separation of powers is the most dynamic topic worldwide. Montesquieu, the French philosopher is credited with the doctrine of separation of powers. Various countries adopted the doctrine and modified it, in order to fit their systems of governments. The reason behind is that there is no universally recognized model of separation of powers or one size fit all. Countries apply this doctrine differently in a fashion that fits their domestic laws and constitutional requirements. Montesquieu gave a classic exposition and the rationale for separation of powers in one of his well-celebrated work “The Spirit of Laws”. The concept of separation of powers emerged premised on the theory that the arms of state namely, the judiciary, the legislature and the executive, should operate within their providence without one interfering with the other. From the South African perspective, the Constitution of South Africa of 1996 requires separation of powers even though it is not explicitly so stated in the text. This research examines the unique South African model of separation of powers and how the courts have navigated through it from the time the Constitution was promulgated. It seeks to establish whether or not a South African model of separation of powers has come to the fore. The research further examines the problem of interference amongst the arms of state and mechanism of checks and balances which can be applied to prevent or minimise such interference. In doing so, the study pursued a desktop survey of primary and secondary materials, including scientific literature, legislation, courts’ jurisprudence, and official documents. A comparative perspective was also made in order to learn from the experiences of other jurisdictions where the doctrine is applied. The findings reveal that South Africa has a unique model of separation of powers. The model was learned and enriched from various foreign jurisdictions. The courts have contributed enormously to this model, which contrive to be fluid and living.
- Full Text:
- Date Issued: 2015
- Authors: Ruzhani, Freddy
- Date: 2015
- Subjects: Farms, Small -- Zimbabwe Tobacco industry -- Zimbabwe Farmers -- Zimbabwe
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10353/12653 , vital:39296
- Description: Constitutionalism and separation of powers is the most dynamic topic worldwide. Montesquieu, the French philosopher is credited with the doctrine of separation of powers. Various countries adopted the doctrine and modified it, in order to fit their systems of governments. The reason behind is that there is no universally recognized model of separation of powers or one size fit all. Countries apply this doctrine differently in a fashion that fits their domestic laws and constitutional requirements. Montesquieu gave a classic exposition and the rationale for separation of powers in one of his well-celebrated work “The Spirit of Laws”. The concept of separation of powers emerged premised on the theory that the arms of state namely, the judiciary, the legislature and the executive, should operate within their providence without one interfering with the other. From the South African perspective, the Constitution of South Africa of 1996 requires separation of powers even though it is not explicitly so stated in the text. This research examines the unique South African model of separation of powers and how the courts have navigated through it from the time the Constitution was promulgated. It seeks to establish whether or not a South African model of separation of powers has come to the fore. The research further examines the problem of interference amongst the arms of state and mechanism of checks and balances which can be applied to prevent or minimise such interference. In doing so, the study pursued a desktop survey of primary and secondary materials, including scientific literature, legislation, courts’ jurisprudence, and official documents. A comparative perspective was also made in order to learn from the experiences of other jurisdictions where the doctrine is applied. The findings reveal that South Africa has a unique model of separation of powers. The model was learned and enriched from various foreign jurisdictions. The courts have contributed enormously to this model, which contrive to be fluid and living.
- Full Text:
- Date Issued: 2015
A Cost-Efficient Energy Management Model for ICT4D Platforms in Low Resource Communities
- Authors: Mbotoloshi, Dumisani
- Date: 2018
- Subjects: Information technology Communication in community development|
- Language: English
- Type: Thesis , Masters , MSc (Computer Science )
- Identifier: http://hdl.handle.net/10353/14538 , vital:39999
- Description: A couple of Information and Communication Technology (ICT) researches have been conducted in the rural communities of South Africa (SA). This has encouraged the development of ICT services such as e-government, e-commerce, e-judiciary, e-health, e-agriculture and many others. Proper ICT implementation has led to societal development, economic empowerment and sustainable communities. However, this is achieved after intensive planning and stakeholders‟ involvement. It is clear that ICTs require energy to function. Most significantly is the fact that a bulk of ICTs in low resource communities (LRC) are mainly donations and less consideration if any is made on their energy consumption. LRC are regions with minimum access to energy, clean water, educational facilities, health facilities, government facilities, technology etc. There have been debates on whether in LRC ICTs are consuming energy. Most ICTs have been deployed without much consideration on the required energy consumption. On the other hand, less research has been done on the sustainability of ICTs, especially considering that all ICT devices and related platforms rely on the availability of energy. There are a lot of possible low cost energy solutions that are available, which could be used to support ICTs in LRC. However, there are so many ICT services, devices and platforms that are lying idle and not been fully utilized in such areas due to the energy related issues. In most cases, ICT solutions in LRC are introduced mainly with Computer Science and Information Systems researchers, without including other key stakeholders like energy experts. The research presents a Cost Effecient Energy Management Model that could be used to assist ICT for Development (ICT4D) platforms or projects in LRC. Both qualitative and quantitative research methods were used within the Siyakhula Living Lab (SLL) in Eastern Cape (EC) Province of SA. Design Science theory is considered for the designing of the model. The SLL is an ICT project which is undertaken within the Dwesa, Bulembu and Alice rural communities. In this dissertation, Dwesa rural community is the chosen case. The surrounding schools in the communities have been used as the ICT point of contact. Interviews, questionnaires, literature v review, action research, focus group, experiments, formulas and evaluation were the specific methods used to conduct this research. Results show that ICTs deployed in the SLLs are mainly donations which consume much energy. The main source of energy use within the SLLs is electricity. From the three schools that were selected where ICTs have been deployed it was found that the electricity bill has increased enormously. This has caused some schools not to open the computer laboratories, which are supposed to be used by the community members. It was also found that there is no energy management plan or solution in place for the SLL resources. The findings show that ICTs within the SLL are been affected by energy related subjects, though the community has been willing to pay for electricity. The Cost Efficient Energy Management Model is proposed at the end of the dissertation. The model is targeted for ICT service providers and has five (5) main pillars i.e stakeholders‟ engagement, energy and ICT infrastructure, new business models, monitoring and evaluation, and finally awareness and training. The dissertation identified all the ICT resources and services at three selected schools within the SLL and drew up the energy consumption for each school. All schools indicated that there has been an increase in the electricity bill after the introduction of the SLL project. There was a clear indication that no energy expert was involved in the establishment of the SLLs. The dissertation indicates that there is a need for renewable source of energy for ICTs to improve service delivery in LRC. ICT service providers should consider energy subjects when planning for development of such solutions in LRC. This research focuses on designing a low cost ICT energy model to inform on ICTs energy consumption in LRC. It further outlines the possible ICT energy solutions that could be used to benefit targeted communities.
- Full Text:
- Date Issued: 2018
- Authors: Mbotoloshi, Dumisani
- Date: 2018
- Subjects: Information technology Communication in community development|
- Language: English
- Type: Thesis , Masters , MSc (Computer Science )
- Identifier: http://hdl.handle.net/10353/14538 , vital:39999
- Description: A couple of Information and Communication Technology (ICT) researches have been conducted in the rural communities of South Africa (SA). This has encouraged the development of ICT services such as e-government, e-commerce, e-judiciary, e-health, e-agriculture and many others. Proper ICT implementation has led to societal development, economic empowerment and sustainable communities. However, this is achieved after intensive planning and stakeholders‟ involvement. It is clear that ICTs require energy to function. Most significantly is the fact that a bulk of ICTs in low resource communities (LRC) are mainly donations and less consideration if any is made on their energy consumption. LRC are regions with minimum access to energy, clean water, educational facilities, health facilities, government facilities, technology etc. There have been debates on whether in LRC ICTs are consuming energy. Most ICTs have been deployed without much consideration on the required energy consumption. On the other hand, less research has been done on the sustainability of ICTs, especially considering that all ICT devices and related platforms rely on the availability of energy. There are a lot of possible low cost energy solutions that are available, which could be used to support ICTs in LRC. However, there are so many ICT services, devices and platforms that are lying idle and not been fully utilized in such areas due to the energy related issues. In most cases, ICT solutions in LRC are introduced mainly with Computer Science and Information Systems researchers, without including other key stakeholders like energy experts. The research presents a Cost Effecient Energy Management Model that could be used to assist ICT for Development (ICT4D) platforms or projects in LRC. Both qualitative and quantitative research methods were used within the Siyakhula Living Lab (SLL) in Eastern Cape (EC) Province of SA. Design Science theory is considered for the designing of the model. The SLL is an ICT project which is undertaken within the Dwesa, Bulembu and Alice rural communities. In this dissertation, Dwesa rural community is the chosen case. The surrounding schools in the communities have been used as the ICT point of contact. Interviews, questionnaires, literature v review, action research, focus group, experiments, formulas and evaluation were the specific methods used to conduct this research. Results show that ICTs deployed in the SLLs are mainly donations which consume much energy. The main source of energy use within the SLLs is electricity. From the three schools that were selected where ICTs have been deployed it was found that the electricity bill has increased enormously. This has caused some schools not to open the computer laboratories, which are supposed to be used by the community members. It was also found that there is no energy management plan or solution in place for the SLL resources. The findings show that ICTs within the SLL are been affected by energy related subjects, though the community has been willing to pay for electricity. The Cost Efficient Energy Management Model is proposed at the end of the dissertation. The model is targeted for ICT service providers and has five (5) main pillars i.e stakeholders‟ engagement, energy and ICT infrastructure, new business models, monitoring and evaluation, and finally awareness and training. The dissertation identified all the ICT resources and services at three selected schools within the SLL and drew up the energy consumption for each school. All schools indicated that there has been an increase in the electricity bill after the introduction of the SLL project. There was a clear indication that no energy expert was involved in the establishment of the SLLs. The dissertation indicates that there is a need for renewable source of energy for ICTs to improve service delivery in LRC. ICT service providers should consider energy subjects when planning for development of such solutions in LRC. This research focuses on designing a low cost ICT energy model to inform on ICTs energy consumption in LRC. It further outlines the possible ICT energy solutions that could be used to benefit targeted communities.
- Full Text:
- Date Issued: 2018
A derivation of the the black-scholes equation using martingales
- Authors: Nyarko , Ebenezer Narh
- Date: 2018
- Subjects: Mathematical models
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10353/14572 , vital:40016
- Description: This work focuses on the application of stochastic differential equations, with martingales, in finance. The emphasis is on the derivation of the Black-Scholes model for the valuation of options. A theoretical framework in stochastic analysis, together with Itô calculus (Kiyoshi Itô), is explored. The Girsanov Theorem is applied in order to transform a modelled stochastic equation based, on predetermined stock and bond prices, into equivalent martingale measures. A replication strategy is then adopted to solve the two equations analytically, by finding the natural logarithm of the expectation of the solution to the stochastic models. We finally compute the resulting solution based on a standard, normal distribution to get the desired outcome of the Black-Scholes model.
- Full Text:
- Date Issued: 2018
- Authors: Nyarko , Ebenezer Narh
- Date: 2018
- Subjects: Mathematical models
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10353/14572 , vital:40016
- Description: This work focuses on the application of stochastic differential equations, with martingales, in finance. The emphasis is on the derivation of the Black-Scholes model for the valuation of options. A theoretical framework in stochastic analysis, together with Itô calculus (Kiyoshi Itô), is explored. The Girsanov Theorem is applied in order to transform a modelled stochastic equation based, on predetermined stock and bond prices, into equivalent martingale measures. A replication strategy is then adopted to solve the two equations analytically, by finding the natural logarithm of the expectation of the solution to the stochastic models. We finally compute the resulting solution based on a standard, normal distribution to get the desired outcome of the Black-Scholes model.
- Full Text:
- Date Issued: 2018
A framework for communicating climate information to rural small-scale farmers in the Eastern Cape Province, South Africa using systems thinking approach
- Pindura, Tineyi Herbert https://orcid.org/0000-0001-7233-6222
- Authors: Pindura, Tineyi Herbert https://orcid.org/0000-0001-7233-6222
- Date: 2022-02
- Subjects: Farms, Small , Agriculture -- Environmental aspects , Climatic changes
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/22809 , vital:52784
- Description: In the Eastern Cape of South Africa, rural small-scale farmers live in uncertain times characterized by climate change and variability, which intensify social, political and financial inequalities. Therefore, there is a need to increase the understanding and interpretation of climate information to minimize crop production risk, reduce rural small-scale farmers’ vulnerability to climate, and maximize opportunities. Increasing the resilience among rural small-scale farmers requires appropriate and viable practical approaches. By using systems thinking approach (and the Raymond Mhlaba Municipality in the Eastern Cape as a study area), this research disseminates the complex nature of current climate information frameworks. Through inputs from farmers (through a Farmers Research Group methodology) and climate data, this thesis developed a new framework for communicating climate information (herein referred as the climate information communication systems framework) to rural small-scale farmers. The proposed climate information communication systems framework successfully integrates scientific and traditional knowledge. The framework constitutes certain stages, where the farming system and crop identification is the first stage. The second stage is the requirements stage, which has two relationships: scientist to crop requirements and farmers to crop requirements. At the scientist to crop requirements level, users will examine crop requirements by combining climatic data and crop simulations, while at the farmers to crop requirement, rural small-scale farmers use the scientific information to plan for the farming season. The farmer then decides the planting and growing period as well as the harvest timing. The study suggests that building links between rural small-scale farmers, extension officers, and scientists makes sharing information easier. The proposed climate information framework design illustrates that stakeholders now have a personal relationship with climate information transmission and can influence the different actions to reduce the effect of climate change unpredictability. The study established that climate change and variability influence recent agricultural output trends. Recent temperature and rainfall trends could have resulted in low crop productivity in the study area. The study also reflected that women are a critical resource in agriculture and rural economy and that middle-aged men and youth are less interested in farming. The findings also showed that women are more receptive to climate information; hence, to promote access and use of climate information remains vital to consider gender-specific aspects for appropriate decision-making in the agriculture sector. The study also recommends enhancing the Farmers Research Group technique. In the past, the scope of this methodology has been narrowly focused, and it must be explored to incorporate additional types of climate information and more debate about how climate is related to the decisions farmers for implementation or consideration. , Thesis (PhD) -- Faculty of Science and Agriculture, 2022
- Full Text:
- Date Issued: 2022-02
- Authors: Pindura, Tineyi Herbert https://orcid.org/0000-0001-7233-6222
- Date: 2022-02
- Subjects: Farms, Small , Agriculture -- Environmental aspects , Climatic changes
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/22809 , vital:52784
- Description: In the Eastern Cape of South Africa, rural small-scale farmers live in uncertain times characterized by climate change and variability, which intensify social, political and financial inequalities. Therefore, there is a need to increase the understanding and interpretation of climate information to minimize crop production risk, reduce rural small-scale farmers’ vulnerability to climate, and maximize opportunities. Increasing the resilience among rural small-scale farmers requires appropriate and viable practical approaches. By using systems thinking approach (and the Raymond Mhlaba Municipality in the Eastern Cape as a study area), this research disseminates the complex nature of current climate information frameworks. Through inputs from farmers (through a Farmers Research Group methodology) and climate data, this thesis developed a new framework for communicating climate information (herein referred as the climate information communication systems framework) to rural small-scale farmers. The proposed climate information communication systems framework successfully integrates scientific and traditional knowledge. The framework constitutes certain stages, where the farming system and crop identification is the first stage. The second stage is the requirements stage, which has two relationships: scientist to crop requirements and farmers to crop requirements. At the scientist to crop requirements level, users will examine crop requirements by combining climatic data and crop simulations, while at the farmers to crop requirement, rural small-scale farmers use the scientific information to plan for the farming season. The farmer then decides the planting and growing period as well as the harvest timing. The study suggests that building links between rural small-scale farmers, extension officers, and scientists makes sharing information easier. The proposed climate information framework design illustrates that stakeholders now have a personal relationship with climate information transmission and can influence the different actions to reduce the effect of climate change unpredictability. The study established that climate change and variability influence recent agricultural output trends. Recent temperature and rainfall trends could have resulted in low crop productivity in the study area. The study also reflected that women are a critical resource in agriculture and rural economy and that middle-aged men and youth are less interested in farming. The findings also showed that women are more receptive to climate information; hence, to promote access and use of climate information remains vital to consider gender-specific aspects for appropriate decision-making in the agriculture sector. The study also recommends enhancing the Farmers Research Group technique. In the past, the scope of this methodology has been narrowly focused, and it must be explored to incorporate additional types of climate information and more debate about how climate is related to the decisions farmers for implementation or consideration. , Thesis (PhD) -- Faculty of Science and Agriculture, 2022
- Full Text:
- Date Issued: 2022-02
A mobile based control system for smart homes
- Authors: Tshimanga, Danny Kazadi
- Date: 2022-03
- Subjects: Smart power grids , Home automation
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10353/22632 , vital:52606
- Description: A Smart Home Control System can provide a secure home, convenience, comfort, and interactivity of life in a particular home. The system can enable the automatic controlling of a house via a Smart Phone. These systems are becoming vital and widely used in homes to improve conditions of life. Most commercial home automation systems are expensive and their maintenance would require experts who understand the underlying implementation of the systems. This study developed a mobile-based home automation system prototype. The system was developed using the waterfall model methodology. To evaluate the developed system, the study used a simulation method. Ten trials were conducted to determine the performance of the implemented system. The mean time to failure was used to evaluate the system’ reliability. The system’s performance analysis revealed that the developed system performed better than the two other approaches; the Bluetooth and ZigBee. The developed system showed a 0 percent error, while the Bluetooth had 8 percent error and ZigBee 6 percent error. The reliability results showed the average lifespan of assets in the system before they could fail. Knowing the lifespan of an asset before it fails can help in reducing downtime of the system by planning or scheduling maintenance and develop an improved maintenance strategy. , Thesis (MSc) -- Faculty of Science and Agriculture, 2021
- Full Text:
- Date Issued: 2022-03
- Authors: Tshimanga, Danny Kazadi
- Date: 2022-03
- Subjects: Smart power grids , Home automation
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10353/22632 , vital:52606
- Description: A Smart Home Control System can provide a secure home, convenience, comfort, and interactivity of life in a particular home. The system can enable the automatic controlling of a house via a Smart Phone. These systems are becoming vital and widely used in homes to improve conditions of life. Most commercial home automation systems are expensive and their maintenance would require experts who understand the underlying implementation of the systems. This study developed a mobile-based home automation system prototype. The system was developed using the waterfall model methodology. To evaluate the developed system, the study used a simulation method. Ten trials were conducted to determine the performance of the implemented system. The mean time to failure was used to evaluate the system’ reliability. The system’s performance analysis revealed that the developed system performed better than the two other approaches; the Bluetooth and ZigBee. The developed system showed a 0 percent error, while the Bluetooth had 8 percent error and ZigBee 6 percent error. The reliability results showed the average lifespan of assets in the system before they could fail. Knowing the lifespan of an asset before it fails can help in reducing downtime of the system by planning or scheduling maintenance and develop an improved maintenance strategy. , Thesis (MSc) -- Faculty of Science and Agriculture, 2021
- Full Text:
- Date Issued: 2022-03
A mobile based user centred integrated remote patient monitoring framework for low resource settings
- Authors: Ndlovu, Nkanyiso
- Date: 2017
- Subjects: Health services accessibility Medical telematics Patient monitoring -- Remote sensing
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10353/8563 , vital:33128
- Description: There is a gap in healthcare service delivery within low resource settings of South Africa. These areas are under-serviced because of poor health infrastructure and few available medical experts. This contributes immensely to poor health care delivery especially to chronically ill diabetic patients and increases mortality rates. However, innovative remote patient monitoring (RPM) systems have been developed to curb the above challenge in recent years. Unfortunately, most of these systems are standalone and are incompatible with one another. Most of them relay on Internet for connectivity which is imminent in low resource settings. This makes continuity of care of chronic ill patients a great challenge. Additional, the efficacy and feasibility of RPM using mobile phones in low resource settings of South Africa are still unknown. It was also noted that none of these systems have been developed for a clinical trial. The goal of this study was to provide a standard framework that allows optimal design of mobile RPM systems which are interoperable. The objectives were to investigate the RPM system efficacy and reliability in low resource settings and determine its effects on clinical management, self-care and health outcomes. The framework was validated with a clinical trial to remotely monitor diabetic adults in Limpopo province of South Africa. A prototype system was developed based on sound user centric design process and enterprise architectural principles to remotely monitor diabetic elderly patients using cellular technologies and existing hospital infrastructure. It was evaluated using a controlled, randomized clinical trial for 6 months. There were 120 patients who took part in the study and were categorized into two groups, the intervention Group X and the control Group Y. Each group comprised of 60 participants. Evidence from this study justified the feasibility and possibility of long term implementation of RPM system to cater for chronic ill patients in low resource settings worldwide. Results showed that the self-care and normal blood glucose levels improved for both groups whereas quality of life improved only for Group X. It was shown that extensive self-care knowledge with the help of RPM system improved self-care and helped normalize their glucose levels. The hospital admissions and mortality between the two groups did not differ much. However, the intervention group had more hospital visits than the control group because the participants were requested to visit the hospitals in case of emergency. The users perceived the RPM system as feasible and effective way of clinical management and self-care. Due to wide acceptance, some patients were even willing to continue using the system after the trial. Home measurements proved to be reliable and helped improve self-care. In future, a standardized and unified framework based on rule set would provide comprehensive remote healthcare allowing continuous patient monitoring at a reduced overall cost thereby decreasing mortality rates.
- Full Text:
- Date Issued: 2017
A mobile based user centred integrated remote patient monitoring framework for low resource settings
- Authors: Ndlovu, Nkanyiso
- Date: 2017
- Subjects: Health services accessibility Medical telematics Patient monitoring -- Remote sensing
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10353/8563 , vital:33128
- Description: There is a gap in healthcare service delivery within low resource settings of South Africa. These areas are under-serviced because of poor health infrastructure and few available medical experts. This contributes immensely to poor health care delivery especially to chronically ill diabetic patients and increases mortality rates. However, innovative remote patient monitoring (RPM) systems have been developed to curb the above challenge in recent years. Unfortunately, most of these systems are standalone and are incompatible with one another. Most of them relay on Internet for connectivity which is imminent in low resource settings. This makes continuity of care of chronic ill patients a great challenge. Additional, the efficacy and feasibility of RPM using mobile phones in low resource settings of South Africa are still unknown. It was also noted that none of these systems have been developed for a clinical trial. The goal of this study was to provide a standard framework that allows optimal design of mobile RPM systems which are interoperable. The objectives were to investigate the RPM system efficacy and reliability in low resource settings and determine its effects on clinical management, self-care and health outcomes. The framework was validated with a clinical trial to remotely monitor diabetic adults in Limpopo province of South Africa. A prototype system was developed based on sound user centric design process and enterprise architectural principles to remotely monitor diabetic elderly patients using cellular technologies and existing hospital infrastructure. It was evaluated using a controlled, randomized clinical trial for 6 months. There were 120 patients who took part in the study and were categorized into two groups, the intervention Group X and the control Group Y. Each group comprised of 60 participants. Evidence from this study justified the feasibility and possibility of long term implementation of RPM system to cater for chronic ill patients in low resource settings worldwide. Results showed that the self-care and normal blood glucose levels improved for both groups whereas quality of life improved only for Group X. It was shown that extensive self-care knowledge with the help of RPM system improved self-care and helped normalize their glucose levels. The hospital admissions and mortality between the two groups did not differ much. However, the intervention group had more hospital visits than the control group because the participants were requested to visit the hospitals in case of emergency. The users perceived the RPM system as feasible and effective way of clinical management and self-care. Due to wide acceptance, some patients were even willing to continue using the system after the trial. Home measurements proved to be reliable and helped improve self-care. In future, a standardized and unified framework based on rule set would provide comprehensive remote healthcare allowing continuous patient monitoring at a reduced overall cost thereby decreasing mortality rates.
- Full Text:
- Date Issued: 2017
A Model for Intrusion Detection in IoT using Machine Learning
- Authors: Nkala, Junior Ruddy
- Date: 2019
- Subjects: Internet of things
- Language: English
- Type: Thesis , Masters , MSc (Computer Science )
- Identifier: http://hdl.handle.net/10353/17180 , vital:40863
- Description: The Internet of Things is an open and comprehensive global network of intelligent objects that have the capacity to auto-organize, share information, data and resources. There are currently over a billion devices connected to the Internet, and this number increases by the day. While these devices make our life easier, safer and healthier, they are expanding the number of attack targets vulnerable to cyber-attacks from potential hackers and malicious software. Therefore, protecting these devices from adversaries and unauthorized access and modification is very important. The purpose of this study is to develop a secure lightweight intrusion and anomaly detection model for IoT to help detect threats in the environment. We propose the use of data mining and machine learning algorithms as a classification technique for detecting abnormal or malicious traffic transmitted between devices due to potential attacks such as DoS, Man-In-Middle and Flooding attacks at the application level. This study makes use of two robust machine learning algorithms, namely the C4.5 Decision Trees and K-means clustering to develop an anomaly detection model. MATLAB Math Simulator was used for implementation. The study conducts a series of experiments in detecting abnormal data and normal data in a dataset that contains gas concentration readings from a number of sensors deployed in an Italian city over a year. Thereafter we examined the classification performance in terms of accuracy of our proposed anomaly detection model. Results drawn from the experiments conducted indicate that the size of the training sample improves classification ability of the proposed model. Our findings noted that the choice of discretization algorithm does matter in the quest for optimal classification performance. The proposed model proved accurate in detecting anomalies in IoT, and classifying between normal and abnormal data. The proposed model has a classification accuracy of 96.51% which proved to be higher compared to other algorithms such as the Naïve Bayes. The model proved to be lightweight and efficient in-terms of being faster at training and testing as compared to Artificial Neural Networks. The conclusions drawn from this research are a perspective from a novice machine learning researcher with valuable recommendations that ensure optimal classification of normal and abnormal IoT data.
- Full Text:
- Date Issued: 2019
- Authors: Nkala, Junior Ruddy
- Date: 2019
- Subjects: Internet of things
- Language: English
- Type: Thesis , Masters , MSc (Computer Science )
- Identifier: http://hdl.handle.net/10353/17180 , vital:40863
- Description: The Internet of Things is an open and comprehensive global network of intelligent objects that have the capacity to auto-organize, share information, data and resources. There are currently over a billion devices connected to the Internet, and this number increases by the day. While these devices make our life easier, safer and healthier, they are expanding the number of attack targets vulnerable to cyber-attacks from potential hackers and malicious software. Therefore, protecting these devices from adversaries and unauthorized access and modification is very important. The purpose of this study is to develop a secure lightweight intrusion and anomaly detection model for IoT to help detect threats in the environment. We propose the use of data mining and machine learning algorithms as a classification technique for detecting abnormal or malicious traffic transmitted between devices due to potential attacks such as DoS, Man-In-Middle and Flooding attacks at the application level. This study makes use of two robust machine learning algorithms, namely the C4.5 Decision Trees and K-means clustering to develop an anomaly detection model. MATLAB Math Simulator was used for implementation. The study conducts a series of experiments in detecting abnormal data and normal data in a dataset that contains gas concentration readings from a number of sensors deployed in an Italian city over a year. Thereafter we examined the classification performance in terms of accuracy of our proposed anomaly detection model. Results drawn from the experiments conducted indicate that the size of the training sample improves classification ability of the proposed model. Our findings noted that the choice of discretization algorithm does matter in the quest for optimal classification performance. The proposed model proved accurate in detecting anomalies in IoT, and classifying between normal and abnormal data. The proposed model has a classification accuracy of 96.51% which proved to be higher compared to other algorithms such as the Naïve Bayes. The model proved to be lightweight and efficient in-terms of being faster at training and testing as compared to Artificial Neural Networks. The conclusions drawn from this research are a perspective from a novice machine learning researcher with valuable recommendations that ensure optimal classification of normal and abnormal IoT data.
- Full Text:
- Date Issued: 2019
A study of the geology of the Vaalbank and Lady Frere areas in the Karoo Basin of South Africa using gravity, magnetic and gamma-ray spectrometry data: implications of groundwater potential
- Khalimashe, Sinesihle, Gwavava, Oswald
- Authors: Khalimashe, Sinesihle , Gwavava, Oswald
- Date: 2020
- Subjects: Gamma ray astronomy
- Language: English
- Type: Thesis , Masters , MSc (Geology)
- Identifier: http://hdl.handle.net/10353/11983 , vital:39124
- Description: The Vaalbank and Lady Frere areas belong to the Elliot, Molteno and Burgersdorp Formations, that are part of the sedimentary succession of the Beaufort Group in the Karoo Basin of South Africa. There is Quaternary alluvium covering the mudstone, sandstone and shale rocks of the Beaufort Group. Dolerite and gabbro sills of the Karoo age have intruded the whole area. A number of investigations were carried out for the study namely field observations, petrographic, X-ray diffraction, airborne gamma-ray spectrometry, aeromagnetic and gravity analyses. Twenty four rock samples were collected in the field from fresh outcrops of the Karoo dolerites, Burgersdorp and Molteno formations. The measured densities and porosities show that the Karoo dolerite suite has the highest average dry density of 2.771 g/cm3 and the lowest average porosity of 3%. The Burgersdorp Formation has an intermediate average density of 2.458 g/cm3 and an intermediate average porosity of 5.4%. The Molteno Formation has the lowest average density of 2.190 g/cm3 and the highest average porosity of 14.5%. Petrographic and geochemical investigations were carried on 19 rocks samples collected in the field to determine the mineralogy character using microscopic and XRD analyses. Both petrographic and X-ray diffraction analyses revealed that the sandstones of the study area are composed of quartz as their primary mineral and feldspars as the secondary mineral. The dolerite consists of euhedral structured minerals such as magnetite, pyroxene, plagioclase and amphibole. The gamma ray maps show high spectrometric values are associated with the Burgersdorp Formation, alluvium cover and dolerite dykes. The low spectrometric values are associated with dolerite sills and ring complexes. The boundaries of the sill/ring complexes are clearly delineated by the K/U ratio and ternary maps. The magnetic maps show ring like patterns of magnetic high anomalies that are due to the sills/ring complexes whilst the numerous, narrow, linear magnetic highs are due to faults and dolerite dyke swarms. The majority of the dykes trend in a NW-SE direction and a few dykes are in a NE-SE direction. The magnetic power spectrum indicates four depths of the magnetic sources at average depths of 0.13 km, 1.60 km, 2.83 km and 12.40 km. The magnetic depth iii slices maps show that both the circular/ring like and linear anomalies extend from shallow to deeper depth of 12.4 km. The gravity map is dominated by a long wavelength gravity anomaly that increases from about -120 mGals in the northwestern corner of the study area to -110 mGals in the southeastern corner of the study area. Results from 2½D gravity modelling show that this long wavelength anomaly is due to a horizontal Moho at a depth of 47 km in the study area, which shallows outside the study area near the coast. Superimposed on it are short wavelength gravity anomalies due to low density sediments and high density dolerite intrusions. The simple 2½D models generated from five profiles traversing the study area reveal that the sediments of the Karoo Supergroup extend from the surface down to a depth 5 km below sea level attaining a maximum thickness of about 6½ km. These sediments are dykes, sills and ring complexes. The dykes and sills/ring complexes identified from gamma ray spectrometry, magnetic and gravity data results are likely to be associated with fractures, joints, cracks and fissures in the host rocks, which form preferential pathways for groundwater transmission. Hence, they could be suitable targets for groundwater.
- Full Text:
- Date Issued: 2020
- Authors: Khalimashe, Sinesihle , Gwavava, Oswald
- Date: 2020
- Subjects: Gamma ray astronomy
- Language: English
- Type: Thesis , Masters , MSc (Geology)
- Identifier: http://hdl.handle.net/10353/11983 , vital:39124
- Description: The Vaalbank and Lady Frere areas belong to the Elliot, Molteno and Burgersdorp Formations, that are part of the sedimentary succession of the Beaufort Group in the Karoo Basin of South Africa. There is Quaternary alluvium covering the mudstone, sandstone and shale rocks of the Beaufort Group. Dolerite and gabbro sills of the Karoo age have intruded the whole area. A number of investigations were carried out for the study namely field observations, petrographic, X-ray diffraction, airborne gamma-ray spectrometry, aeromagnetic and gravity analyses. Twenty four rock samples were collected in the field from fresh outcrops of the Karoo dolerites, Burgersdorp and Molteno formations. The measured densities and porosities show that the Karoo dolerite suite has the highest average dry density of 2.771 g/cm3 and the lowest average porosity of 3%. The Burgersdorp Formation has an intermediate average density of 2.458 g/cm3 and an intermediate average porosity of 5.4%. The Molteno Formation has the lowest average density of 2.190 g/cm3 and the highest average porosity of 14.5%. Petrographic and geochemical investigations were carried on 19 rocks samples collected in the field to determine the mineralogy character using microscopic and XRD analyses. Both petrographic and X-ray diffraction analyses revealed that the sandstones of the study area are composed of quartz as their primary mineral and feldspars as the secondary mineral. The dolerite consists of euhedral structured minerals such as magnetite, pyroxene, plagioclase and amphibole. The gamma ray maps show high spectrometric values are associated with the Burgersdorp Formation, alluvium cover and dolerite dykes. The low spectrometric values are associated with dolerite sills and ring complexes. The boundaries of the sill/ring complexes are clearly delineated by the K/U ratio and ternary maps. The magnetic maps show ring like patterns of magnetic high anomalies that are due to the sills/ring complexes whilst the numerous, narrow, linear magnetic highs are due to faults and dolerite dyke swarms. The majority of the dykes trend in a NW-SE direction and a few dykes are in a NE-SE direction. The magnetic power spectrum indicates four depths of the magnetic sources at average depths of 0.13 km, 1.60 km, 2.83 km and 12.40 km. The magnetic depth iii slices maps show that both the circular/ring like and linear anomalies extend from shallow to deeper depth of 12.4 km. The gravity map is dominated by a long wavelength gravity anomaly that increases from about -120 mGals in the northwestern corner of the study area to -110 mGals in the southeastern corner of the study area. Results from 2½D gravity modelling show that this long wavelength anomaly is due to a horizontal Moho at a depth of 47 km in the study area, which shallows outside the study area near the coast. Superimposed on it are short wavelength gravity anomalies due to low density sediments and high density dolerite intrusions. The simple 2½D models generated from five profiles traversing the study area reveal that the sediments of the Karoo Supergroup extend from the surface down to a depth 5 km below sea level attaining a maximum thickness of about 6½ km. These sediments are dykes, sills and ring complexes. The dykes and sills/ring complexes identified from gamma ray spectrometry, magnetic and gravity data results are likely to be associated with fractures, joints, cracks and fissures in the host rocks, which form preferential pathways for groundwater transmission. Hence, they could be suitable targets for groundwater.
- Full Text:
- Date Issued: 2020
A study of the selected wild edible plants utilized by indigenous people of the Amathole District in the Eastern Cape Province of South Africa
- Kwinana-Mandindi, Thozama Ndileka
- Authors: Kwinana-Mandindi, Thozama Ndileka
- Date: 2012
- Subjects: Wild plants, Edible http://id.loc.gov/authorities/subjects/sh85146686
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/19598 , vital:43147
- Description: Wild edible plants are an indispensible part of diets in some of the poor resourced rural societies. In many less resourced households a main meal comprises of a starch staple which is accompanied by a supplement of vegetables that provide the other nutritional elements as well as flavour to the meals. The vegetable relish (isishebo) thus, becomes an important component of the diet. The sustenance of many such resource poor indigenous societies over many generations has been as a result of their reliance on a readily available supply of their nutritional requirements, where edible wild plants formed the major food source. Wild edible plants provided the most important source of nutritional supply even during times of drought and famine. However, lifestyle changes have caused a serious reduction of the gathering and use of the wild edible vegetables, knowledge about them and the local culture are also lost with them. Unfortunately, others have come to regard their traditional food resource base as primitive and inferior and have come to rely on new exotic food plant whose supply is unstable and narrow compared to the wide variety of wild edible plants. Even when drought challenges play destruction with food availability, resulting in food shortages due to the reliance on cultivated crops that are poorly adapted to local conditions, communities cannot go back to the unknown food plants. However, detailed scientific investigations are needed to understand and preserve wild food uses. This study was undertaken to add to that body of knowledge. It started with an ethnobotanic survey of the use of wild food plants in 10 selected rural villages and peri-urban dwellings in the Amathole District of the Eastern Cape. These rural areas were chosen because of the belief that there are still individuals who possess the wealth of traditional knowledge within those remote areas in addition to that the villages are surrounded by indigenous vegetation from which they could be harvesting some indigenous food plants. Furthermore, the relationship between people and plants are often clearer in indigenous/traditional societies since the link between production and consumption is more direct. Besides the survey, this research employed various methods including Inductively Coupled Argon (ICP) analyses of minerals and vitamins, determination of phytochemicals and antioxidant/bio-activity that of, higher performance liquid chromatography (HPLC) determination of other vitamins, assessment of proximate and anti-nutrient compositions of raw and cooked samples of plants, scanning electron microscopy (SEM) and energy dispersive x-ray spectroscopy (EDXS) to look into the micro-morphology of leaves for details that might have a bearing in the nutrient composition of the wild edible vegetables. This was done with the aim to explore and highlight the wild-food-plant base of indigenous people, to investigate the nutritional value of the selected frequently consumed wild vegetables and to recommend ways of educating people on the value of such plants and the need to promote their continued sustainable use as well as preservation of them for the benefit of people who cannot afford a continuous nutritious meal particularly among rural communities. Twenty-five (25) indigenous wild food plants which included leafy vegetables, nuts and fruits species were identified as being arbitrarily gathered and utilised as food, of which seven wild leafy vegetable species were often mentioned as common among the 15 dwellings surveyed and most frequently consumed by the respondents. Two additional plants were also frequently used as flavoring and in their raw state respectively. Wild edible vegetables were mainly eaten boiled as ‘laxa’, mixed with maize meal as ‘imifino’, fried as relish ‘isishebo’ or raw for both snacking purposes and medicinal functions. Wild edible plant species in the Amathole District of the Eastern Cape-South Africa were documented with respect to their uses and knowledge or identification. Four indigenous wild vegetables (Chenopodium album, Solanum nigrum/nodiflorum, Amaranthus dubius and Urtica lobulata) frequently consumed by the indigenous communities in the study region were selected. All the plant species had a remarkably high content of pro-anthocyanidins (between 58.42 and 65.18 mg/g) and also exhibited high radical scavenging activity in vitro. S. nigrum and C. album were found to be rich sources of ascorbic acid, having 1.05mg/100g and 1.01mg/100g, respectively. The entire wild, traditionally edible plants contain reasonably good concentrations of riboflavin while U. lobulata was found to contain maximum amount of thiamine. All plant species were rich sources of minerals and vitamins (both water soluble and fat soluble). Appropriate cooking methods are to be used to enhance the bio-availability of vitamins and nutrients in general. Cooking generally improved the nutritive value in certain wild vegetables. However, some nutrients were drained away. For example micro-nutrient and anti-nutrient component in the ash were reduced in cooking. The EDXS analysis has shown that the indigenous, wild vegetables in the Amathole District of South Africa are excellent sources of minerals, while the mineral crystals present at the level of the mesophyll of the indigenous wild vegetables were probably mixtures of calcium oxalate, calcium sulphate and silica. Saponin, tannins, oxalates, phytates and alkaloids are present in all the indigenous wild vegetables, but in minimal safe quantities. Nutritional analysis of some wild food plants demonstrates that in many cases the nutritional quality of the plants is comparable and in some cases even superior to domesticated exotic varieties. Knowledge about gathering and use of some wild food species is common among the rural dwellers. However, most uses are known by few elderly informants only. Education, awareness campaigns and revival of use of wild edible plants directed at the youth particularly is essential and this can be done through all forms of media. , Thesis (PhD) (Ethnobotany) -- University of Fort Hare, 2012
- Full Text:
- Date Issued: 2012
- Authors: Kwinana-Mandindi, Thozama Ndileka
- Date: 2012
- Subjects: Wild plants, Edible http://id.loc.gov/authorities/subjects/sh85146686
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/19598 , vital:43147
- Description: Wild edible plants are an indispensible part of diets in some of the poor resourced rural societies. In many less resourced households a main meal comprises of a starch staple which is accompanied by a supplement of vegetables that provide the other nutritional elements as well as flavour to the meals. The vegetable relish (isishebo) thus, becomes an important component of the diet. The sustenance of many such resource poor indigenous societies over many generations has been as a result of their reliance on a readily available supply of their nutritional requirements, where edible wild plants formed the major food source. Wild edible plants provided the most important source of nutritional supply even during times of drought and famine. However, lifestyle changes have caused a serious reduction of the gathering and use of the wild edible vegetables, knowledge about them and the local culture are also lost with them. Unfortunately, others have come to regard their traditional food resource base as primitive and inferior and have come to rely on new exotic food plant whose supply is unstable and narrow compared to the wide variety of wild edible plants. Even when drought challenges play destruction with food availability, resulting in food shortages due to the reliance on cultivated crops that are poorly adapted to local conditions, communities cannot go back to the unknown food plants. However, detailed scientific investigations are needed to understand and preserve wild food uses. This study was undertaken to add to that body of knowledge. It started with an ethnobotanic survey of the use of wild food plants in 10 selected rural villages and peri-urban dwellings in the Amathole District of the Eastern Cape. These rural areas were chosen because of the belief that there are still individuals who possess the wealth of traditional knowledge within those remote areas in addition to that the villages are surrounded by indigenous vegetation from which they could be harvesting some indigenous food plants. Furthermore, the relationship between people and plants are often clearer in indigenous/traditional societies since the link between production and consumption is more direct. Besides the survey, this research employed various methods including Inductively Coupled Argon (ICP) analyses of minerals and vitamins, determination of phytochemicals and antioxidant/bio-activity that of, higher performance liquid chromatography (HPLC) determination of other vitamins, assessment of proximate and anti-nutrient compositions of raw and cooked samples of plants, scanning electron microscopy (SEM) and energy dispersive x-ray spectroscopy (EDXS) to look into the micro-morphology of leaves for details that might have a bearing in the nutrient composition of the wild edible vegetables. This was done with the aim to explore and highlight the wild-food-plant base of indigenous people, to investigate the nutritional value of the selected frequently consumed wild vegetables and to recommend ways of educating people on the value of such plants and the need to promote their continued sustainable use as well as preservation of them for the benefit of people who cannot afford a continuous nutritious meal particularly among rural communities. Twenty-five (25) indigenous wild food plants which included leafy vegetables, nuts and fruits species were identified as being arbitrarily gathered and utilised as food, of which seven wild leafy vegetable species were often mentioned as common among the 15 dwellings surveyed and most frequently consumed by the respondents. Two additional plants were also frequently used as flavoring and in their raw state respectively. Wild edible vegetables were mainly eaten boiled as ‘laxa’, mixed with maize meal as ‘imifino’, fried as relish ‘isishebo’ or raw for both snacking purposes and medicinal functions. Wild edible plant species in the Amathole District of the Eastern Cape-South Africa were documented with respect to their uses and knowledge or identification. Four indigenous wild vegetables (Chenopodium album, Solanum nigrum/nodiflorum, Amaranthus dubius and Urtica lobulata) frequently consumed by the indigenous communities in the study region were selected. All the plant species had a remarkably high content of pro-anthocyanidins (between 58.42 and 65.18 mg/g) and also exhibited high radical scavenging activity in vitro. S. nigrum and C. album were found to be rich sources of ascorbic acid, having 1.05mg/100g and 1.01mg/100g, respectively. The entire wild, traditionally edible plants contain reasonably good concentrations of riboflavin while U. lobulata was found to contain maximum amount of thiamine. All plant species were rich sources of minerals and vitamins (both water soluble and fat soluble). Appropriate cooking methods are to be used to enhance the bio-availability of vitamins and nutrients in general. Cooking generally improved the nutritive value in certain wild vegetables. However, some nutrients were drained away. For example micro-nutrient and anti-nutrient component in the ash were reduced in cooking. The EDXS analysis has shown that the indigenous, wild vegetables in the Amathole District of South Africa are excellent sources of minerals, while the mineral crystals present at the level of the mesophyll of the indigenous wild vegetables were probably mixtures of calcium oxalate, calcium sulphate and silica. Saponin, tannins, oxalates, phytates and alkaloids are present in all the indigenous wild vegetables, but in minimal safe quantities. Nutritional analysis of some wild food plants demonstrates that in many cases the nutritional quality of the plants is comparable and in some cases even superior to domesticated exotic varieties. Knowledge about gathering and use of some wild food species is common among the rural dwellers. However, most uses are known by few elderly informants only. Education, awareness campaigns and revival of use of wild edible plants directed at the youth particularly is essential and this can be done through all forms of media. , Thesis (PhD) (Ethnobotany) -- University of Fort Hare, 2012
- Full Text:
- Date Issued: 2012
A study of the southwestern Karoo basin in South Africa using magnetic and gravity data
- Authors: Nxantsiya, Zusakhe
- Date: 2017
- Subjects: Groundwater -- South Africa -- Karoo
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10353/14043 , vital:39800
- Description: The early efforts of Booth, Johnson, Rubidge, Catuneanu, de Wit, Chevallier, Stankiewicz, Weckmann and many other scientists in studying the Karoo Supergroup has led to comprehensive documentation of the geology on the main Karoo Basin with regards to understanding the age, sedimentology, sedimentary facies and depositional environments. In spite of these studies, the subsurface structure, variations in thickness of various formations in large parts of the basin, the location and orientation of subsurface dolerite intrusions, and the depth to magnetic and gravity sources remains poorly documented. A geological study with the aid of geophysical techniques, magnetic and gravity, was conducted in the southwestern part of the main Karoo Basin. The objectives of the study were to construct numerous models of the main basin that image the crust to a depth of 45 km, to determine thicknesses of various formations, to relate observed geophysical anomalies with geological bodies and lineaments, to estimate the depth of existing anomalous bodies, to determine densities and porosity of various formations, as well as to determine the mineralogy of various rocks in the Karoo Basin. In total, seventy one rock samples were collected in the main Karoo Basin for density and mineralogical studies. The density results showed that the Beaufort and Ecca Group rocks have the low mean density of 2.490 g/cm3 amongst the rocks while the dolerite intrusions have the highest mean density of 2.697 g/cm3. The porosities of various rocks determined from the measured rock densities revealed that the Ecca Group shales, particularly the Whitehill Formation has the highest porosity of 4.5percent, while the Collingham Formation has the least porosity of 1.4 percent amongst the Ecca Group shales. Mineralogical analysis of seventeen XRD samples and 26 thin sections indicate that quartz, kaolinite, and plagioclase occur as the major mineral in most sandstones and shales in the Karoo Basin, while the pyrophyllite, smectite, and talc occur as minor minerals. Other mineral constituents include, calcite, mica, and amphibole. The 2½ dimensional (2½ D) gravity modelling along seven selected profiles, across the Beattie Magnetic Anomaly (BMA), revealed that the Ecca Group sediments, a target for shale gas exploration in the Karoo, occurs within a depth range of 0 - 4000 m from the surface. The basin deepens to a depth of 4600 m in the southwestern region, near the front of the Cape Fold Belt. It was observed as well that the Karoo dolerite sills are connected at depths and are mostly concentrated at the centre, the deepest part of the basin with some having saucer shape - like structure. These observations correspond well with the borehole data from AB 1/65 and QU 1/65 presented in Linol and de Wit (2016). Thickness isochore maps that were extracted from the gravity models indicate that the Ecca Group, which is the main target for hydrocarbon exploration, thickens to the south away from the centre of the basin and reaches thicknesses of greater than 3680 m. The Beaufort Group proves to be the thickest succession in the Karoo Basin with an estimated thickness of up to 6046 m. Constructed geophysical maps with the geology overlain reveal that most magnetic anomalies are due to dolerite intrusions, while gravity lows are due to less dense shales of the Ecca Group. The depth slices of magnetic data indicate that near surface magnetic bodies occur within the depth of 42 m from the surface whereas deep seated ones occur as deep as 9488 m and possibly deeper. Gravity depth slices reveal signatures that are predominant at depth of 2403 m are of short wavelength and are mainly lineaments and circular structures. They ultimately disappear at depth of 7120 m. The depth slices further indicate that the intensity of both magnetic and gravity long wavelength signatures become stronger with increasing depths.
- Full Text:
- Date Issued: 2017
- Authors: Nxantsiya, Zusakhe
- Date: 2017
- Subjects: Groundwater -- South Africa -- Karoo
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10353/14043 , vital:39800
- Description: The early efforts of Booth, Johnson, Rubidge, Catuneanu, de Wit, Chevallier, Stankiewicz, Weckmann and many other scientists in studying the Karoo Supergroup has led to comprehensive documentation of the geology on the main Karoo Basin with regards to understanding the age, sedimentology, sedimentary facies and depositional environments. In spite of these studies, the subsurface structure, variations in thickness of various formations in large parts of the basin, the location and orientation of subsurface dolerite intrusions, and the depth to magnetic and gravity sources remains poorly documented. A geological study with the aid of geophysical techniques, magnetic and gravity, was conducted in the southwestern part of the main Karoo Basin. The objectives of the study were to construct numerous models of the main basin that image the crust to a depth of 45 km, to determine thicknesses of various formations, to relate observed geophysical anomalies with geological bodies and lineaments, to estimate the depth of existing anomalous bodies, to determine densities and porosity of various formations, as well as to determine the mineralogy of various rocks in the Karoo Basin. In total, seventy one rock samples were collected in the main Karoo Basin for density and mineralogical studies. The density results showed that the Beaufort and Ecca Group rocks have the low mean density of 2.490 g/cm3 amongst the rocks while the dolerite intrusions have the highest mean density of 2.697 g/cm3. The porosities of various rocks determined from the measured rock densities revealed that the Ecca Group shales, particularly the Whitehill Formation has the highest porosity of 4.5percent, while the Collingham Formation has the least porosity of 1.4 percent amongst the Ecca Group shales. Mineralogical analysis of seventeen XRD samples and 26 thin sections indicate that quartz, kaolinite, and plagioclase occur as the major mineral in most sandstones and shales in the Karoo Basin, while the pyrophyllite, smectite, and talc occur as minor minerals. Other mineral constituents include, calcite, mica, and amphibole. The 2½ dimensional (2½ D) gravity modelling along seven selected profiles, across the Beattie Magnetic Anomaly (BMA), revealed that the Ecca Group sediments, a target for shale gas exploration in the Karoo, occurs within a depth range of 0 - 4000 m from the surface. The basin deepens to a depth of 4600 m in the southwestern region, near the front of the Cape Fold Belt. It was observed as well that the Karoo dolerite sills are connected at depths and are mostly concentrated at the centre, the deepest part of the basin with some having saucer shape - like structure. These observations correspond well with the borehole data from AB 1/65 and QU 1/65 presented in Linol and de Wit (2016). Thickness isochore maps that were extracted from the gravity models indicate that the Ecca Group, which is the main target for hydrocarbon exploration, thickens to the south away from the centre of the basin and reaches thicknesses of greater than 3680 m. The Beaufort Group proves to be the thickest succession in the Karoo Basin with an estimated thickness of up to 6046 m. Constructed geophysical maps with the geology overlain reveal that most magnetic anomalies are due to dolerite intrusions, while gravity lows are due to less dense shales of the Ecca Group. The depth slices of magnetic data indicate that near surface magnetic bodies occur within the depth of 42 m from the surface whereas deep seated ones occur as deep as 9488 m and possibly deeper. Gravity depth slices reveal signatures that are predominant at depth of 2403 m are of short wavelength and are mainly lineaments and circular structures. They ultimately disappear at depth of 7120 m. The depth slices further indicate that the intensity of both magnetic and gravity long wavelength signatures become stronger with increasing depths.
- Full Text:
- Date Issued: 2017
Accessibility of agricultural information by smallholder farmers in Amatole District Municipality: Nexus between agricultural extension services and the library
- Authors: Sigigaba, Masimthembe
- Date: 2020
- Subjects: Farms, Small
- Language: English
- Type: Thesis , Masters , M Agric (Agric Extension)
- Identifier: http://hdl.handle.net/10353/18849 , vital:42870
- Description: Accessibility to relevant, accurate and timely information remains vital in farming. For farmers to improve their productivity they depend on access to pertinent agricultural information. Such information updated them about new agricultural technologies, climate change, new cultivars, access to market and access to financial assistance. These types of information help farmers in decision making regarding their farming. Agricultural extension officers remain a reliable source where farmers could obtain relevant agricultural information. Community libraries are also channels that could be used by agricultural extension officers to complement their work of providing farmers with information. Thus, the study sought to assess linkage between these two institutions to provide farmers with information. A positivism paradigm with quantitative research approach were adopted in the study. Smallholder farmers (169), agricultural extension officers (5) and librarians (15) were the unit of analysis. A semi-structured questionnaire was used for data collection and SPSS software for analysis. Findings revealed that, agricultural extension officers mostly utilise interpersonal channels that include demonstrations, group meetings and face-to-face interaction to provide farmers with information. Community libraries were found to be non-utilised by extension services and also by farmers. Farmers were of the perception that libraries are meant for educated people. It was also discovered that community libraries have information on agriculture that only targets learners who are taking agriculture in school as a subject. There was no existing linkage between agricultural extension services and community libraries working together to provide farmers with pertinent agricultural information that can help them improve productivity
- Full Text:
- Date Issued: 2020
- Authors: Sigigaba, Masimthembe
- Date: 2020
- Subjects: Farms, Small
- Language: English
- Type: Thesis , Masters , M Agric (Agric Extension)
- Identifier: http://hdl.handle.net/10353/18849 , vital:42870
- Description: Accessibility to relevant, accurate and timely information remains vital in farming. For farmers to improve their productivity they depend on access to pertinent agricultural information. Such information updated them about new agricultural technologies, climate change, new cultivars, access to market and access to financial assistance. These types of information help farmers in decision making regarding their farming. Agricultural extension officers remain a reliable source where farmers could obtain relevant agricultural information. Community libraries are also channels that could be used by agricultural extension officers to complement their work of providing farmers with information. Thus, the study sought to assess linkage between these two institutions to provide farmers with information. A positivism paradigm with quantitative research approach were adopted in the study. Smallholder farmers (169), agricultural extension officers (5) and librarians (15) were the unit of analysis. A semi-structured questionnaire was used for data collection and SPSS software for analysis. Findings revealed that, agricultural extension officers mostly utilise interpersonal channels that include demonstrations, group meetings and face-to-face interaction to provide farmers with information. Community libraries were found to be non-utilised by extension services and also by farmers. Farmers were of the perception that libraries are meant for educated people. It was also discovered that community libraries have information on agriculture that only targets learners who are taking agriculture in school as a subject. There was no existing linkage between agricultural extension services and community libraries working together to provide farmers with pertinent agricultural information that can help them improve productivity
- Full Text:
- Date Issued: 2020
Adaptive responses to heat stress, quality of hide and meat from indigenous Nguni and non-descript crossbred cattle
- Authors: Chikwanda, Denice
- Date: 2016
- Subjects: Cattle -- Effect of temperature on Nguni cattle Beef cattle breeds
- Language: English
- Type: Thesis , Doctoral , PhD (Agriculture)
- Identifier: http://hdl.handle.net/10353/10614 , vital:35635
- Description: The main objective of this study was to determine the adaptive responses of Nguni and non-descript crossbred cattle (NDCC) to heat stress, nutritionally-related blood metabolite profiles, fatty acid profiles, carcass and meat characteristics, physico-mechanical properties of automotive upholstery crust leather and the associated collagen fibre architecture of hides and crust leather. Forty steers (20 Nguni and 20 NDCC) which were approximately 14 months of age with live weights ranging between 153 kg and 203 kg at the beginning of the study were used. Environmental variables (ambient temperature, relative humidity, wind parameters, solar radiation) were collected from a weather station at the research farm. Temperature-humidity index (THI) values were computed. Rectal and skin temperature, skin traits and blood metabolites were determined at two-week intervals over 16 weeks. Hair coat scores ranged from extremely short (score 1) to very woolly (score 7). At slaughter, blood samples were collected after exsanguination. Meat samples were collected from the right muscularis longissimus thoracis et lumborum (LTL) and Triceps brachii (TB) muscles after 24 hours of chilling of carcasses for physico-chemical quality tests. Fatty acid profiles and physico-chemical quality of meat were determined on the LTL and TB. An additional fifty-four hides (27 Nguni and 27 NDCC) were obtained from a commercial abattoir at slaughter. The hides were tanned into automotive crust leather and tested for physico-mechanical quality. Results showed that week and environmental variables affected skin temperature; also, the rectal and skin temperatures were negatively correlated to body condition, skin pigment, coat score and skin thickness. Non-descript crossbred cattle had higher coat scores (2.1 ± 0.36 to 4.1 ± 4.20) than Nguni cattle (1.6 ± 0.36 to 4.1 ± 0.36). Body condition scores, blood creatinine, urea, total protein, albumin and globulin were affected by genotype and week of sampling. At the end of the trial, NDCC had higher slaughter and hide weights (285.9 ± 6.52 kg and 18.4 ± 0.54 kg, respectively) than Nguni cattle (232.6 ± 6.5 kg and 14.7 ± 0.54 kg, respectively). The majority of NDCC carcasses (73.7 percent) had a fatness level of 1 compared to Nguni carcasses (50 percent). Intramuscular fat was higher in Nguni (1.8 ± 0.09 percent) compared to NDCC (1.5 ± 0.09 percent) steers. Nguni steers had darker muscle colour (L*=33.6 ± 0.01) than NDCC (L*= 35.7 ± 0.54). Nguni and NDCC had similar thawing loss, cooking loss, WBSF tenderness, fat-free dry matter, moisture content, fatty acid profiles and health-related lipid indices. Ultimate muscle pH, meat colour and chroma were similar in the LTL and TB. Concerning the skin, Nguni and NDCC had similar physico-mechanical properties. However, breaking load and tensile strength were higher (1257.1 ± 70.72 N and 28.3 ± 1.23 MPa) in samples taken parallel to the backbone compared to that taken perpendicular to the backbone (979.5 ±70.72 N and 23.6 ±1.23MPa) across the two genotypes. Non-descript crossbred crust leather varied in physico-mechanical tests by direction of sampling. Collagen fibre orientation in hides and crust samples also varied between longitudinal and cross-sections. Collagen fibre diameters in the Nguni were similar in longitudinal and cross-sections (3.4 ± 0.12 μm and 3.2 ± 0.11 μm, respectively). From this study, it is concluded that THI, hair coat, skin traits and body condition affect skin temperature, but not rectal temperature, cortisol and CK activity in Nguni and NDCC reared extensively. The two genotypes differ in nutritionally-related blood metabolites, growth performance, hide weights and carcass traits. Beef from Nguni and NDCC differs in the IMF and meat lightness but is similar in the meat fatty acid composition and some physico-chemical quality parameters. Automotive crust leathers from the two genotypes were similar in some physico-mechanical properties. Collagen architecture varied among different regions of hides and crust leathers
- Full Text:
- Date Issued: 2016
- Authors: Chikwanda, Denice
- Date: 2016
- Subjects: Cattle -- Effect of temperature on Nguni cattle Beef cattle breeds
- Language: English
- Type: Thesis , Doctoral , PhD (Agriculture)
- Identifier: http://hdl.handle.net/10353/10614 , vital:35635
- Description: The main objective of this study was to determine the adaptive responses of Nguni and non-descript crossbred cattle (NDCC) to heat stress, nutritionally-related blood metabolite profiles, fatty acid profiles, carcass and meat characteristics, physico-mechanical properties of automotive upholstery crust leather and the associated collagen fibre architecture of hides and crust leather. Forty steers (20 Nguni and 20 NDCC) which were approximately 14 months of age with live weights ranging between 153 kg and 203 kg at the beginning of the study were used. Environmental variables (ambient temperature, relative humidity, wind parameters, solar radiation) were collected from a weather station at the research farm. Temperature-humidity index (THI) values were computed. Rectal and skin temperature, skin traits and blood metabolites were determined at two-week intervals over 16 weeks. Hair coat scores ranged from extremely short (score 1) to very woolly (score 7). At slaughter, blood samples were collected after exsanguination. Meat samples were collected from the right muscularis longissimus thoracis et lumborum (LTL) and Triceps brachii (TB) muscles after 24 hours of chilling of carcasses for physico-chemical quality tests. Fatty acid profiles and physico-chemical quality of meat were determined on the LTL and TB. An additional fifty-four hides (27 Nguni and 27 NDCC) were obtained from a commercial abattoir at slaughter. The hides were tanned into automotive crust leather and tested for physico-mechanical quality. Results showed that week and environmental variables affected skin temperature; also, the rectal and skin temperatures were negatively correlated to body condition, skin pigment, coat score and skin thickness. Non-descript crossbred cattle had higher coat scores (2.1 ± 0.36 to 4.1 ± 4.20) than Nguni cattle (1.6 ± 0.36 to 4.1 ± 0.36). Body condition scores, blood creatinine, urea, total protein, albumin and globulin were affected by genotype and week of sampling. At the end of the trial, NDCC had higher slaughter and hide weights (285.9 ± 6.52 kg and 18.4 ± 0.54 kg, respectively) than Nguni cattle (232.6 ± 6.5 kg and 14.7 ± 0.54 kg, respectively). The majority of NDCC carcasses (73.7 percent) had a fatness level of 1 compared to Nguni carcasses (50 percent). Intramuscular fat was higher in Nguni (1.8 ± 0.09 percent) compared to NDCC (1.5 ± 0.09 percent) steers. Nguni steers had darker muscle colour (L*=33.6 ± 0.01) than NDCC (L*= 35.7 ± 0.54). Nguni and NDCC had similar thawing loss, cooking loss, WBSF tenderness, fat-free dry matter, moisture content, fatty acid profiles and health-related lipid indices. Ultimate muscle pH, meat colour and chroma were similar in the LTL and TB. Concerning the skin, Nguni and NDCC had similar physico-mechanical properties. However, breaking load and tensile strength were higher (1257.1 ± 70.72 N and 28.3 ± 1.23 MPa) in samples taken parallel to the backbone compared to that taken perpendicular to the backbone (979.5 ±70.72 N and 23.6 ±1.23MPa) across the two genotypes. Non-descript crossbred crust leather varied in physico-mechanical tests by direction of sampling. Collagen fibre orientation in hides and crust samples also varied between longitudinal and cross-sections. Collagen fibre diameters in the Nguni were similar in longitudinal and cross-sections (3.4 ± 0.12 μm and 3.2 ± 0.11 μm, respectively). From this study, it is concluded that THI, hair coat, skin traits and body condition affect skin temperature, but not rectal temperature, cortisol and CK activity in Nguni and NDCC reared extensively. The two genotypes differ in nutritionally-related blood metabolites, growth performance, hide weights and carcass traits. Beef from Nguni and NDCC differs in the IMF and meat lightness but is similar in the meat fatty acid composition and some physico-chemical quality parameters. Automotive crust leathers from the two genotypes were similar in some physico-mechanical properties. Collagen architecture varied among different regions of hides and crust leathers
- Full Text:
- Date Issued: 2016
Adol-Safety: A Framework for Empowering Parents to be Aware of Social Network Threats Affecting Adolescents
- Mjoli, Phumelela, Shibeshi, Z
- Authors: Mjoli, Phumelela , Shibeshi, Z
- Date: 2020
- Subjects: Social networks Social media|
- Language: English
- Type: Thesis , Masters , MSc (Computer Science )
- Identifier: http://hdl.handle.net/10353/12016 , vital:39127
- Description: The use of social networks has grown so much that adolescents have become active members of various social networks such as Twitter, Facebook, and Instagram, etc. The gradual change in how people choose to communicate, socialize and share ideas today has influenced adolescents to an extent that they find themselves wanting to engage more on social networks than they really should due to peer pressure. Whenever a person joins social networks or browses the Internet, they by default are exposed and become vulnerable to many cyber threats. Cyber threats are driven by users that have negative intentions on the Internet or social networks. Adolescents are no exception to these cyber threats. The findings of this research reveal that threats such as cyberbullying, harassment, and online predators to name a few are often designed to abuse and affect adolescents). Therefore, this research aims to prevent such threats from prevailing by empowering parents to be aware of the threats that affect their adolescents in an online environment, which typically includes social networks. To achieve this, this research starts by investigating the cyber threats that affect adolescents and then explores ways that can be used to empower parents. A framework is developed to handle this. The framework includes strategies that parents can adopt and ways in which safety on social networks can be increased, as well as guidelines that can be followed in order to prevent cyber threats. The framework also aims to enhance a parent-child relationship that can help in preventing social network threats. Lastly, the framework is implemented as a knowledgesharing website that can be used by parents to receive and give an insight into social network threats that influence adolescents on social networks.
- Full Text:
- Date Issued: 2020
- Authors: Mjoli, Phumelela , Shibeshi, Z
- Date: 2020
- Subjects: Social networks Social media|
- Language: English
- Type: Thesis , Masters , MSc (Computer Science )
- Identifier: http://hdl.handle.net/10353/12016 , vital:39127
- Description: The use of social networks has grown so much that adolescents have become active members of various social networks such as Twitter, Facebook, and Instagram, etc. The gradual change in how people choose to communicate, socialize and share ideas today has influenced adolescents to an extent that they find themselves wanting to engage more on social networks than they really should due to peer pressure. Whenever a person joins social networks or browses the Internet, they by default are exposed and become vulnerable to many cyber threats. Cyber threats are driven by users that have negative intentions on the Internet or social networks. Adolescents are no exception to these cyber threats. The findings of this research reveal that threats such as cyberbullying, harassment, and online predators to name a few are often designed to abuse and affect adolescents). Therefore, this research aims to prevent such threats from prevailing by empowering parents to be aware of the threats that affect their adolescents in an online environment, which typically includes social networks. To achieve this, this research starts by investigating the cyber threats that affect adolescents and then explores ways that can be used to empower parents. A framework is developed to handle this. The framework includes strategies that parents can adopt and ways in which safety on social networks can be increased, as well as guidelines that can be followed in order to prevent cyber threats. The framework also aims to enhance a parent-child relationship that can help in preventing social network threats. Lastly, the framework is implemented as a knowledgesharing website that can be used by parents to receive and give an insight into social network threats that influence adolescents on social networks.
- Full Text:
- Date Issued: 2020
Adolescent sexual reproductive health and rights in the Alice area, Eastern Cape Province of South Africa
- Authors: Moko, Zukhanye
- Date: 2021-02
- Subjects: Reproductive health , Right to health , HIV infections
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10353/20676 , vital:46423
- Description: Sexual Reproductive Health (SRH) is a significant aspect of adolescent’s growth. Adolescents particularly girls face the risk of exposure to Human Immunodeficiency Virus (HIV), Sexually Transmitted Diseases (STDs), child marriages, high rates of unwanted pregnancy and the risk of those pregnancies can lead to unsafe abortion. In South Africa, considerable progress has been made in achieving improved access to Sexual Reproductive Health and Rights (SRHR) among the general population, however, some factors influencing SRHR of adolescents and young people have been slow to achieve. The study aims to investigate factors influencing Sexual Reproductive Health and Rights of adolescents in Alice, which is located in the Eastern Cape Province of South Africa. The Social-Ecological Model was considered appropriate for this study as it provides a comprehensive understanding of the multiple and interacting determinants of Sexual Reproductive Health and Rights. A qualitative methodology was adopted, involving focus groups with high school learners, in-depth interviews with institutional actors (Department of Health, Basic Education and Social Development), and participant observations. The study reveals that adolescents’ have access to Sexual Reproductive Health services from healthcare centres but only a few utilize or access them due to barriers such as the geographical location, denial and judgement about young people's sexuality limits their access to comprehensive knowledge to protect and promote their Sexual and Reproductive Health. The findings show that the adolescents who were most affected by Sexual Reproductive Health and Rights challenges were those from deep rural areas. They had minimal information/education compared to those residing in areas close to the town of Alice and major roads. Multi-sectoral interventions empowering adolescents and young people to exercise their rights to optimize SRHR service yield better results. , Thesis (MSc) -- Faculty of Science & Agriculture, 2021
- Full Text:
- Date Issued: 2021-02
- Authors: Moko, Zukhanye
- Date: 2021-02
- Subjects: Reproductive health , Right to health , HIV infections
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10353/20676 , vital:46423
- Description: Sexual Reproductive Health (SRH) is a significant aspect of adolescent’s growth. Adolescents particularly girls face the risk of exposure to Human Immunodeficiency Virus (HIV), Sexually Transmitted Diseases (STDs), child marriages, high rates of unwanted pregnancy and the risk of those pregnancies can lead to unsafe abortion. In South Africa, considerable progress has been made in achieving improved access to Sexual Reproductive Health and Rights (SRHR) among the general population, however, some factors influencing SRHR of adolescents and young people have been slow to achieve. The study aims to investigate factors influencing Sexual Reproductive Health and Rights of adolescents in Alice, which is located in the Eastern Cape Province of South Africa. The Social-Ecological Model was considered appropriate for this study as it provides a comprehensive understanding of the multiple and interacting determinants of Sexual Reproductive Health and Rights. A qualitative methodology was adopted, involving focus groups with high school learners, in-depth interviews with institutional actors (Department of Health, Basic Education and Social Development), and participant observations. The study reveals that adolescents’ have access to Sexual Reproductive Health services from healthcare centres but only a few utilize or access them due to barriers such as the geographical location, denial and judgement about young people's sexuality limits their access to comprehensive knowledge to protect and promote their Sexual and Reproductive Health. The findings show that the adolescents who were most affected by Sexual Reproductive Health and Rights challenges were those from deep rural areas. They had minimal information/education compared to those residing in areas close to the town of Alice and major roads. Multi-sectoral interventions empowering adolescents and young people to exercise their rights to optimize SRHR service yield better results. , Thesis (MSc) -- Faculty of Science & Agriculture, 2021
- Full Text:
- Date Issued: 2021-02
Adsorption of antibiotic-resistant bacteria and their cell-free deoxyribonucleic acid harbouring resistance genes in drinking water with metal oxides
- Authors: Tobechukwu, Anthony Eric
- Date: 2022
- Subjects: Metallic oxides , DNA -- Synthesis , Drinking water
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/27787 , vital:69494
- Description: Access to cleaner water is essential to human health. The incidence of Antibiotic Resistant Bacteria ARB in drinking water and subsequent proliferation of Antibiotic Resistance Genes ARGs in drinking water is a concern for public health. The free DNA cassette harboring antibiotic resistance gene in drinking water has been linked with impaired public health. The ARGs allows bacteria to develop resistance towards antibiotics while ARB render antibiotics ineffective. Existing drinking water treatment technologies eg adsorption, ozonation and chlorination, have shown different levels of potency in the removal of conventional water pollutant. These technologies, which operating principles is based on oxidation or mass transfer, have been explored to gained an insight into their efficiency in the removal of ARB ARGs in water treatment. In general, methods that functions by mass transfer of the ARB ARGs is more effectively than bacteria oxidation. Consequently, adsorption technology was chosen using common metal oxide adsorbents. The adsorbents ZnOAg CeO2 and Al2O3 were synthesized via the self propagation combustion method. This method was selected because of the purity of the final product and the energy requirement. One of the challenges in the removal of ARB in drinking water is the release of ARGs. To address this concern, five different ZnOAg heterostructures were synthesized for the removal of Enterococci faecium. ZnOAg was chosen because of the bactericidal and bacteriostatic characteristics. The study revealed that the concentration of the precursors influences the microstructures of the adsorbents; however, it did not significantly affect the adsorption efficiency. The maximum adsorption capacity q34.11 CFUg was obtained for Ag1Zn3.5. The kinetic studies revealed that Ag1Zn1 and Ag1Zn2 adsorbents agreed to the pseudofirst-order kinetic equation and adsorbents Ag2Zn1 Ag3.5Zn1 and Ag1Zn3.5 agreed to the pseudo-second-order kinetic equation. Initial tap-water pH range was beneficial for the adsorption and the pH of the treated tap-water was within the WHO tap water recommendation 6.5 – 8.5 whereas the effect of ionic strength, anionic and cationic interference was insignificant in the adsorption of MDREF onto the different heterostructure. Interestingly the MDREF could retain its cell membrane integrity and resistance genes, suggesting that surface adsorption was the primary mechanism for the removal. Cerium IV oxide CeO2 was selected because of high adsorption towards phosphate, backbone base for DNA. To prevent the problem of antibiotic resistance, we have synthesized a CeO2 adsorbent that exhibit highly positive character in a wide pH range, via the simple self-propagation combustion protocol, for the removal of free DNA harboring antibiotic resistance genes. Molecular characterization of the extracted genes showed that the sizes for E. coli and inherent gyrB genes are 147 and 460 bp with a purity between 19 2.0. The XRD SEM TEM, and PZC results of the as-synthesized CeO2 showed an agglomerate of pure cubic-faced centered material and highly crystalline, with a net charge at pH 6.2. Experimental results revealed that the reaction proceeded via pseudo first-order kinetic, and it is governed by electrostatic attraction. The free- DNA solution pH electrolyte, and competing ions impacted on the adsorption process. Further experimental results showed that the as-synthesized CeO2 adsorbent has the potential to be used for the removal of free DNA harboring ARGs from tap-water even under oxic conditions. Alumina Al2O3 is an abundant adsorbent that has also shown high removal capacity towards phosphate. The highly pure synthesized Al2O3 adsorbent exhibit fluid-like behaviour under Scanning Electron Microscope SEM. The XRD pattern corresponds to αAl2O3. The adsorption kinetics was described by pseudo second orderadsorption capacity 11.7 μgg implying chemisorption, which agrees with the electrostatic force of attraction caused by opposing ions. This result was evident by the effect of different ions in the tap water. The synthesized α-Al2O3 has the potential for the removal of cell free DNA harbouring multiply resistant genes. , Thesis (MSc) -- Faculty of Science and Agriculture, 2022
- Full Text:
- Date Issued: 2022
- Authors: Tobechukwu, Anthony Eric
- Date: 2022
- Subjects: Metallic oxides , DNA -- Synthesis , Drinking water
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/27787 , vital:69494
- Description: Access to cleaner water is essential to human health. The incidence of Antibiotic Resistant Bacteria ARB in drinking water and subsequent proliferation of Antibiotic Resistance Genes ARGs in drinking water is a concern for public health. The free DNA cassette harboring antibiotic resistance gene in drinking water has been linked with impaired public health. The ARGs allows bacteria to develop resistance towards antibiotics while ARB render antibiotics ineffective. Existing drinking water treatment technologies eg adsorption, ozonation and chlorination, have shown different levels of potency in the removal of conventional water pollutant. These technologies, which operating principles is based on oxidation or mass transfer, have been explored to gained an insight into their efficiency in the removal of ARB ARGs in water treatment. In general, methods that functions by mass transfer of the ARB ARGs is more effectively than bacteria oxidation. Consequently, adsorption technology was chosen using common metal oxide adsorbents. The adsorbents ZnOAg CeO2 and Al2O3 were synthesized via the self propagation combustion method. This method was selected because of the purity of the final product and the energy requirement. One of the challenges in the removal of ARB in drinking water is the release of ARGs. To address this concern, five different ZnOAg heterostructures were synthesized for the removal of Enterococci faecium. ZnOAg was chosen because of the bactericidal and bacteriostatic characteristics. The study revealed that the concentration of the precursors influences the microstructures of the adsorbents; however, it did not significantly affect the adsorption efficiency. The maximum adsorption capacity q34.11 CFUg was obtained for Ag1Zn3.5. The kinetic studies revealed that Ag1Zn1 and Ag1Zn2 adsorbents agreed to the pseudofirst-order kinetic equation and adsorbents Ag2Zn1 Ag3.5Zn1 and Ag1Zn3.5 agreed to the pseudo-second-order kinetic equation. Initial tap-water pH range was beneficial for the adsorption and the pH of the treated tap-water was within the WHO tap water recommendation 6.5 – 8.5 whereas the effect of ionic strength, anionic and cationic interference was insignificant in the adsorption of MDREF onto the different heterostructure. Interestingly the MDREF could retain its cell membrane integrity and resistance genes, suggesting that surface adsorption was the primary mechanism for the removal. Cerium IV oxide CeO2 was selected because of high adsorption towards phosphate, backbone base for DNA. To prevent the problem of antibiotic resistance, we have synthesized a CeO2 adsorbent that exhibit highly positive character in a wide pH range, via the simple self-propagation combustion protocol, for the removal of free DNA harboring antibiotic resistance genes. Molecular characterization of the extracted genes showed that the sizes for E. coli and inherent gyrB genes are 147 and 460 bp with a purity between 19 2.0. The XRD SEM TEM, and PZC results of the as-synthesized CeO2 showed an agglomerate of pure cubic-faced centered material and highly crystalline, with a net charge at pH 6.2. Experimental results revealed that the reaction proceeded via pseudo first-order kinetic, and it is governed by electrostatic attraction. The free- DNA solution pH electrolyte, and competing ions impacted on the adsorption process. Further experimental results showed that the as-synthesized CeO2 adsorbent has the potential to be used for the removal of free DNA harboring ARGs from tap-water even under oxic conditions. Alumina Al2O3 is an abundant adsorbent that has also shown high removal capacity towards phosphate. The highly pure synthesized Al2O3 adsorbent exhibit fluid-like behaviour under Scanning Electron Microscope SEM. The XRD pattern corresponds to αAl2O3. The adsorption kinetics was described by pseudo second orderadsorption capacity 11.7 μgg implying chemisorption, which agrees with the electrostatic force of attraction caused by opposing ions. This result was evident by the effect of different ions in the tap water. The synthesized α-Al2O3 has the potential for the removal of cell free DNA harbouring multiply resistant genes. , Thesis (MSc) -- Faculty of Science and Agriculture, 2022
- Full Text:
- Date Issued: 2022
Aeolian processes and landforms at Mesrug on sub-Antarctic Marion Island
- Authors: Nguna, Abuyiselwe Athandile
- Date: 2019
- Subjects: Eolian processes Sediments (Geology)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10353/17095 , vital:40848
- Description: Recent observations have recognised the increasing role of aeolian processes as a geomorphic agent on sub-Antarctic Marion Island. This study presents the first long-term data on aeolian processes and dynamics at Mesrug (46° 56’ 41”S; 37° 49’ 59”E) on subAntarctic Marion Island. An intensive and high-resolution (five-minute interval) environmental monitoring campaign was initiated using Pace Scientific XR5 data loggers while aeolian transported sediments were collected using Big Spring Number Eight (BSNE) sediment traps at four different heights above the ground. The aeolian features at Mesrug is identified as mega-ripples and is essentially an erosional feature, while annual sediment flux at 0.05 m height were calculated as 2.29 kg cm-2 y -1 . Spatial data based on a two-year survey showed that the entire surface of the study area have lowered by deflation while the ripples shifted slightly eastward (down-wind). Furthermore, the site lost 3.4 m3 of sediment between these two surveys with an average of 0.75 cm per 1 m2 across the site which has an area of 454 m2 . The study suggest that the relatively large particle size of surface sediments on Marion Island is a major contributor to the low annual aeolian sediment flux. From the AWS data it is clear that high wind speeds are frequent at Mesrug and the high wind speeds facilitating sediment movement. Sediment supply is the limiting factor of aeolian sediment transport, but even though the perennial wetness experienced on the island is not a major limiting factor to sediment flux, it may influence rate of movement. The predominant wind direction at the study site is from the south-west but maximum wind velocities are from the north-west. The data from the wind-aspirated BSNE sediment traps, indicate that sediment movement occurs closest to the surface and weight of sediment moved as well as size of particles decreases vertically in the air column. It seems that the upper limit of aeolian sediment transport at Mesrug is 0.8 m above the ground and saltation of particles is the dominant aeolian transport mechanism. Sediment movement occur in near gale to gale force winds and horizontal precipitation. This is mainly associated with strong north-westerly winds which are linked to a frontal system from a mid-latitudinal cyclone that has a strong meridional component or is a cut of low pressure. The data suggest that the climate change implication of a reduction in the westerly component of wind could reduce wind speeds and this could influence the magnitude and frequency of aeolian sediment transport on Marion Island in the future
- Full Text:
- Date Issued: 2019
- Authors: Nguna, Abuyiselwe Athandile
- Date: 2019
- Subjects: Eolian processes Sediments (Geology)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10353/17095 , vital:40848
- Description: Recent observations have recognised the increasing role of aeolian processes as a geomorphic agent on sub-Antarctic Marion Island. This study presents the first long-term data on aeolian processes and dynamics at Mesrug (46° 56’ 41”S; 37° 49’ 59”E) on subAntarctic Marion Island. An intensive and high-resolution (five-minute interval) environmental monitoring campaign was initiated using Pace Scientific XR5 data loggers while aeolian transported sediments were collected using Big Spring Number Eight (BSNE) sediment traps at four different heights above the ground. The aeolian features at Mesrug is identified as mega-ripples and is essentially an erosional feature, while annual sediment flux at 0.05 m height were calculated as 2.29 kg cm-2 y -1 . Spatial data based on a two-year survey showed that the entire surface of the study area have lowered by deflation while the ripples shifted slightly eastward (down-wind). Furthermore, the site lost 3.4 m3 of sediment between these two surveys with an average of 0.75 cm per 1 m2 across the site which has an area of 454 m2 . The study suggest that the relatively large particle size of surface sediments on Marion Island is a major contributor to the low annual aeolian sediment flux. From the AWS data it is clear that high wind speeds are frequent at Mesrug and the high wind speeds facilitating sediment movement. Sediment supply is the limiting factor of aeolian sediment transport, but even though the perennial wetness experienced on the island is not a major limiting factor to sediment flux, it may influence rate of movement. The predominant wind direction at the study site is from the south-west but maximum wind velocities are from the north-west. The data from the wind-aspirated BSNE sediment traps, indicate that sediment movement occurs closest to the surface and weight of sediment moved as well as size of particles decreases vertically in the air column. It seems that the upper limit of aeolian sediment transport at Mesrug is 0.8 m above the ground and saltation of particles is the dominant aeolian transport mechanism. Sediment movement occur in near gale to gale force winds and horizontal precipitation. This is mainly associated with strong north-westerly winds which are linked to a frontal system from a mid-latitudinal cyclone that has a strong meridional component or is a cut of low pressure. The data suggest that the climate change implication of a reduction in the westerly component of wind could reduce wind speeds and this could influence the magnitude and frequency of aeolian sediment transport on Marion Island in the future
- Full Text:
- Date Issued: 2019
Agricultural co-operative societies and challenges of sustainability: The case of vegetable cooperative societies in King Sabata Dalindyebo Local Municipality, Eastern Cape Province
- Sohuma, Anathi https://orcid.org/0000-0001-6260-6428
- Authors: Sohuma, Anathi https://orcid.org/0000-0001-6260-6428
- Date: 2020-06
- Subjects: Agriculture, Cooperative , Sustainable development
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10353/21422 , vital:48601
- Description: The government has initiated various support programmes to assist agricultural co-operative societies to remain viable; however, many cooperatives continue to flounder while some have collapsed. This dissertation assesses the challenges of sustainability facing agricultural co-operative societies gushing vegetable co-operative societies in King Sabata Dalindyebo Local Municipality, Eastern Cape Province as a point of departure. The study used the corporate sustainability theory to investigate the extent to which co-operative societies are able to operate sustainably. The data for this study were collected through document reviews and non-scheduled structured interviews which were conducted through a questionnaire. The board of directors were sampled purposively. The research adopted stratified sampling to select co-operative members that participated in the study. This research made use of the Statistical Package for the Social Sciences (SPSS) version 24 software to analyse data. The outcomes provide an understanding of the sustainability challenges that face vegetable co-operative societies. The results show that most of the co-operative societies rely on members for daily farm management. With regards to management, co-operative societies reveal that they keep sales, production and meeting record books. Furthermore, most co-operatives specified that they received training for financial and production record-keeping. It was found that some cooperatives have had training only once since their establishment. However, fewer co-operatives reported that keeping records is still challenging for them due to lack of training and little profit made from sales. The findings suggest that co-operative societies can function well and become sustainable when there is good management and cooperation amongst members. Based on the findings of this research, it is recommended that the government and co-operative stakeholders should play a greater part in ensuring co-operative societies are developed and managed in a way that will make them sustainable without relying solely on government support. For example, the government and stakeholders can establish and enforce policies that encourage co-operatives to invest in member capability programmes that would equip farmers understanding, adoption and use of co-operative values and principles. This would help in reducing challenges that occur within co-operatives and promote cohesion and commitment within co-operatives. The role of extension services towards the sustainability of the co-operatives is crucial. The majority of the co-operatives indicated that there is some level of interaction between the co-operatives and extension personnel albeit, there is a need to improve the frequency of extension visits, training and follow-up appointments. , Thesis (MSc) -- Faculty of Science and Agriculture, 2020
- Full Text:
- Date Issued: 2020-06
- Authors: Sohuma, Anathi https://orcid.org/0000-0001-6260-6428
- Date: 2020-06
- Subjects: Agriculture, Cooperative , Sustainable development
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10353/21422 , vital:48601
- Description: The government has initiated various support programmes to assist agricultural co-operative societies to remain viable; however, many cooperatives continue to flounder while some have collapsed. This dissertation assesses the challenges of sustainability facing agricultural co-operative societies gushing vegetable co-operative societies in King Sabata Dalindyebo Local Municipality, Eastern Cape Province as a point of departure. The study used the corporate sustainability theory to investigate the extent to which co-operative societies are able to operate sustainably. The data for this study were collected through document reviews and non-scheduled structured interviews which were conducted through a questionnaire. The board of directors were sampled purposively. The research adopted stratified sampling to select co-operative members that participated in the study. This research made use of the Statistical Package for the Social Sciences (SPSS) version 24 software to analyse data. The outcomes provide an understanding of the sustainability challenges that face vegetable co-operative societies. The results show that most of the co-operative societies rely on members for daily farm management. With regards to management, co-operative societies reveal that they keep sales, production and meeting record books. Furthermore, most co-operatives specified that they received training for financial and production record-keeping. It was found that some cooperatives have had training only once since their establishment. However, fewer co-operatives reported that keeping records is still challenging for them due to lack of training and little profit made from sales. The findings suggest that co-operative societies can function well and become sustainable when there is good management and cooperation amongst members. Based on the findings of this research, it is recommended that the government and co-operative stakeholders should play a greater part in ensuring co-operative societies are developed and managed in a way that will make them sustainable without relying solely on government support. For example, the government and stakeholders can establish and enforce policies that encourage co-operatives to invest in member capability programmes that would equip farmers understanding, adoption and use of co-operative values and principles. This would help in reducing challenges that occur within co-operatives and promote cohesion and commitment within co-operatives. The role of extension services towards the sustainability of the co-operatives is crucial. The majority of the co-operatives indicated that there is some level of interaction between the co-operatives and extension personnel albeit, there is a need to improve the frequency of extension visits, training and follow-up appointments. , Thesis (MSc) -- Faculty of Science and Agriculture, 2020
- Full Text:
- Date Issued: 2020-06
Agro-morphological characterisation, nitrogen use efficiency and combining ability of quality protein maize (zea mays l.) genotypes for low nitrogen tolerance
- AdeOluwa, Olusola Oluyinka https://orcid.org/ 0000-0003-2145-7141
- Authors: AdeOluwa, Olusola Oluyinka https://orcid.org/ 0000-0003-2145-7141
- Date: 2021-08
- Subjects: Corn -- Quality
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/21501 , vital:48855 , http://id.loc.gov/authorities/subjects/sh85032715
- Description: Low nitrogen stress tolerant Quality Protein Maize (QPM) genotypes will be of great benefit to farmers for increasing productivity in nitrogen depleted soils in the Eastern Cape (EC) Province, South Africa (SA). The current study evaluated: (i) QPM inbred lines for tolerance to low soil nitrogen, (ii) the Nitrogen Use Efficiency (NUE) of different QPM inbred lines, (iii) the combining ability of QPM genotypes for tolerance to low nitrogen, grain yield, and other agro-morphological traits, and (iv) the agro-morphological characteristics and adaptation of QPM hybrids to environments of different production potential in the Eastern Cape, South Africa. Thirty-two white-seeded QPM inbred lines obtained from CIMMYT-Zimbabwe and Quality Seeds (PTY) LTD were evaluated for tolerance to low soil nitrogen stress using two nitrogen (N) treatment levels: 0 kg N ha-1 and 30 kg N ha-1 under both glasshouse and field conditions at the Crop Research farm, University of Fort Hare, in two planting seasons. The study aimed at assessing the response of QPM inbred lines to low N, with a view to identifying low N tolerant types under both glasshouse and field conditions. Shoot length stress tolerance index (SHL STI) indicated lines L23, L29, L27, L13, L16, L17, L31, L14, L18 and L22 to be low soil N tolerant from the glasshouse study. From the field study, low N Stress Tolerance Index (STI) identified inbred lines L23, L31, L26, L28, L25, L29, L32, L4, L6, L3 and L2 as low soil N tolerant. These inbred lines also had high grain yields (GY) in the field under 0 kg N ha-1 (all ranked within the top ten except L2). They also had the potential for stable yields across environments considering their high Yield Stability Index (YSI), Mean Productivity (MP), Geometric Mean Productivity (GMP) and Stress Susceptibility Index (SSI) values. Both the glasshouse and field studies revealed inbred lines L22, L23, L26, L28, L25, L29 and L31 were common to both the glasshouse and field studies as being low soil N tolerant. These thirty-two parental QPM inbred lines were evaluated in the field for their nitrogen use efficiency (NUE) under five different nitrogen levels: 0, 30, 60, 90 and 120 kg N ha-1. The inbred lines studied under 0 kg N ha-1 and 30 kg N ha-1 indicated that N level expressed highly significant differences (P ≤ 0.001) for total nitrogen in biomass (Bio Total N), total nitrogen in grain (G Total N), grain yield (GY), nitrogen use efficiency (NUE) and almost all the indices estimated. The top six nutrient use efficient genotypes were L9, L14, L23, L25, L29 and L32 across N levels. However, the best and highest NUE was obtained from the lowest fertilizer dose, 30 kg N ha-1. Highly significant and positive correlation coefficients were found between Nitrogen Use Efficiency (NUE) and yield (+0.9), NUE and NUtE (+0.9), NUE and HI (Harvest Index) (+0.5), NUtE and yield (+0.99), HI and yield (+0.5) and NUtE and HI (+0.5). Thus, NUE, HI and NUtE could be good predictors of yield potential under low N soil conditions. Sixty-four testcross hybrids were generated from crossing these 32 QPM inbred lines with two QPM open pollinated varieties (OPVs) as testers in a line x tester design and were evaluated under 0 kg N ha-1 and 30 kg N ha-1 in the field. The objectives of the experiment were to: (i) identify high yielding hybrids with tolerance to low soil N in the EC; (ii) determine the combining abilities and mode of gene action for various traits under low and high nitrogen conditions; and (iii) group the inbred lines into heterotic groups for future use in the breeding program. Results revealed that under 30 kg N ha-1 (30N) condition, both additive and non-additive gene effects were observed with less importance of non-additive gene action for grain yield. Based on specific combining ability (SCA) effects, hybrids LNC22, LNC31, LOB22, LNC30, LNC29, LOB11, LNC18, LOB30, LOB19 and LNC24 showed outstanding performance under 0 kg N ha-1 (0N) condition with relatively acceptable SCA under 30N for yield. Inbred lines L6 (1.63), L22 (1.74), L29 (1.83) and L30 (1.24) showed positive and significant GCAs for grain yield under 0N. They were identified as the best combiners for grain yield as they were among the top ten performers for GCA under 0N. They can be very useful sources of low N tolerance genes. Two heterotic groups were formed under 0 kg N ha-1 and 30 kg N ha-1 conditions, and they will be useful for future hybrid development in the breeding program. Furthermore, these thirty-two QPM inbred lines were utilised as parental lines to generate seventy-six single cross hybrids. These single cross hybrids were evaluated across three environments of varying production potential in the Eastern Cape (EC), during the 2016/17 and 2017/18 summer seasons. Non-QPM hybrids namely PAN5Q649R and Phb31MO7BR, as well as QPM OPVs OBATANPA and Nelson's Choice were included in these preliminary variety trials (PVTs) as checks. Twenty-five hybrids expressing high values for the Smith – Hazel selection index were identified across sites over years. Among those hybrids were two checks, namely Q16 (PAN5Q649R) and Q33 (Phb31MO7BR). The top five high – yielding hybrids selected based on the selection index were considered to be the most productive, stable and adaptable based on the GGE biplot and AMMI stability values. None of these single cross hybrids over yielded the best hybrid check (Q16) in the current study. A high potential environment, Centane, was the ideal environments for evaluating genotypes in the present study. The studies showed inbred lines L22, L23, L26, L28, L25, L29 and L31 to be low N stress tolerant at 0 kg N ha-1 based on the low N stress tolerance indices under glasshouse and the field conditions; they were also among the top ten grain-yielders under field conditions at 0 kg N ha-1. Also, in the NUE study, they were found to be among the top ten most N-efficient inbred lines under low N soils, under 30 kg N ha-1, and were among the top twenty-four inbred lines with high NUE values across the N levels in the study. Inbred lines L29 and L22 also produced testcross hybrids that were among the top twenty based on GY under 0 kg N ha-1. The testcross hybrids produced from these inbred lines were also among the top twenty-five with outstanding SCA effects for GY. These inbred lines were also parental lines of some of the top twenty- five best hybrids selected based on the Smith – Hazel selection index in the PVT study. Inbred lines L22, L23, L26, L28, L25, L29 and L31 can therefore further be evaluated and used as sources of N-tolerance genes in QPM breeding programs. , Thesis (PhD) -- Faculty of Science and Agriculture, 2021
- Full Text:
- Date Issued: 2021-08
- Authors: AdeOluwa, Olusola Oluyinka https://orcid.org/ 0000-0003-2145-7141
- Date: 2021-08
- Subjects: Corn -- Quality
- Language: English
- Type: Doctoral theses , text
- Identifier: http://hdl.handle.net/10353/21501 , vital:48855 , http://id.loc.gov/authorities/subjects/sh85032715
- Description: Low nitrogen stress tolerant Quality Protein Maize (QPM) genotypes will be of great benefit to farmers for increasing productivity in nitrogen depleted soils in the Eastern Cape (EC) Province, South Africa (SA). The current study evaluated: (i) QPM inbred lines for tolerance to low soil nitrogen, (ii) the Nitrogen Use Efficiency (NUE) of different QPM inbred lines, (iii) the combining ability of QPM genotypes for tolerance to low nitrogen, grain yield, and other agro-morphological traits, and (iv) the agro-morphological characteristics and adaptation of QPM hybrids to environments of different production potential in the Eastern Cape, South Africa. Thirty-two white-seeded QPM inbred lines obtained from CIMMYT-Zimbabwe and Quality Seeds (PTY) LTD were evaluated for tolerance to low soil nitrogen stress using two nitrogen (N) treatment levels: 0 kg N ha-1 and 30 kg N ha-1 under both glasshouse and field conditions at the Crop Research farm, University of Fort Hare, in two planting seasons. The study aimed at assessing the response of QPM inbred lines to low N, with a view to identifying low N tolerant types under both glasshouse and field conditions. Shoot length stress tolerance index (SHL STI) indicated lines L23, L29, L27, L13, L16, L17, L31, L14, L18 and L22 to be low soil N tolerant from the glasshouse study. From the field study, low N Stress Tolerance Index (STI) identified inbred lines L23, L31, L26, L28, L25, L29, L32, L4, L6, L3 and L2 as low soil N tolerant. These inbred lines also had high grain yields (GY) in the field under 0 kg N ha-1 (all ranked within the top ten except L2). They also had the potential for stable yields across environments considering their high Yield Stability Index (YSI), Mean Productivity (MP), Geometric Mean Productivity (GMP) and Stress Susceptibility Index (SSI) values. Both the glasshouse and field studies revealed inbred lines L22, L23, L26, L28, L25, L29 and L31 were common to both the glasshouse and field studies as being low soil N tolerant. These thirty-two parental QPM inbred lines were evaluated in the field for their nitrogen use efficiency (NUE) under five different nitrogen levels: 0, 30, 60, 90 and 120 kg N ha-1. The inbred lines studied under 0 kg N ha-1 and 30 kg N ha-1 indicated that N level expressed highly significant differences (P ≤ 0.001) for total nitrogen in biomass (Bio Total N), total nitrogen in grain (G Total N), grain yield (GY), nitrogen use efficiency (NUE) and almost all the indices estimated. The top six nutrient use efficient genotypes were L9, L14, L23, L25, L29 and L32 across N levels. However, the best and highest NUE was obtained from the lowest fertilizer dose, 30 kg N ha-1. Highly significant and positive correlation coefficients were found between Nitrogen Use Efficiency (NUE) and yield (+0.9), NUE and NUtE (+0.9), NUE and HI (Harvest Index) (+0.5), NUtE and yield (+0.99), HI and yield (+0.5) and NUtE and HI (+0.5). Thus, NUE, HI and NUtE could be good predictors of yield potential under low N soil conditions. Sixty-four testcross hybrids were generated from crossing these 32 QPM inbred lines with two QPM open pollinated varieties (OPVs) as testers in a line x tester design and were evaluated under 0 kg N ha-1 and 30 kg N ha-1 in the field. The objectives of the experiment were to: (i) identify high yielding hybrids with tolerance to low soil N in the EC; (ii) determine the combining abilities and mode of gene action for various traits under low and high nitrogen conditions; and (iii) group the inbred lines into heterotic groups for future use in the breeding program. Results revealed that under 30 kg N ha-1 (30N) condition, both additive and non-additive gene effects were observed with less importance of non-additive gene action for grain yield. Based on specific combining ability (SCA) effects, hybrids LNC22, LNC31, LOB22, LNC30, LNC29, LOB11, LNC18, LOB30, LOB19 and LNC24 showed outstanding performance under 0 kg N ha-1 (0N) condition with relatively acceptable SCA under 30N for yield. Inbred lines L6 (1.63), L22 (1.74), L29 (1.83) and L30 (1.24) showed positive and significant GCAs for grain yield under 0N. They were identified as the best combiners for grain yield as they were among the top ten performers for GCA under 0N. They can be very useful sources of low N tolerance genes. Two heterotic groups were formed under 0 kg N ha-1 and 30 kg N ha-1 conditions, and they will be useful for future hybrid development in the breeding program. Furthermore, these thirty-two QPM inbred lines were utilised as parental lines to generate seventy-six single cross hybrids. These single cross hybrids were evaluated across three environments of varying production potential in the Eastern Cape (EC), during the 2016/17 and 2017/18 summer seasons. Non-QPM hybrids namely PAN5Q649R and Phb31MO7BR, as well as QPM OPVs OBATANPA and Nelson's Choice were included in these preliminary variety trials (PVTs) as checks. Twenty-five hybrids expressing high values for the Smith – Hazel selection index were identified across sites over years. Among those hybrids were two checks, namely Q16 (PAN5Q649R) and Q33 (Phb31MO7BR). The top five high – yielding hybrids selected based on the selection index were considered to be the most productive, stable and adaptable based on the GGE biplot and AMMI stability values. None of these single cross hybrids over yielded the best hybrid check (Q16) in the current study. A high potential environment, Centane, was the ideal environments for evaluating genotypes in the present study. The studies showed inbred lines L22, L23, L26, L28, L25, L29 and L31 to be low N stress tolerant at 0 kg N ha-1 based on the low N stress tolerance indices under glasshouse and the field conditions; they were also among the top ten grain-yielders under field conditions at 0 kg N ha-1. Also, in the NUE study, they were found to be among the top ten most N-efficient inbred lines under low N soils, under 30 kg N ha-1, and were among the top twenty-four inbred lines with high NUE values across the N levels in the study. Inbred lines L29 and L22 also produced testcross hybrids that were among the top twenty based on GY under 0 kg N ha-1. The testcross hybrids produced from these inbred lines were also among the top twenty-five with outstanding SCA effects for GY. These inbred lines were also parental lines of some of the top twenty- five best hybrids selected based on the Smith – Hazel selection index in the PVT study. Inbred lines L22, L23, L26, L28, L25, L29 and L31 can therefore further be evaluated and used as sources of N-tolerance genes in QPM breeding programs. , Thesis (PhD) -- Faculty of Science and Agriculture, 2021
- Full Text:
- Date Issued: 2021-08