Bluetooth audio and video streaming on the J2ME platform
- Authors: Sahd, Curtis Lee
- Date: 2011 , 2010-09-09
- Subjects: Bluetooth technology , Mobile communication systems , Communication -- Technological innovations , Communication -- Network analysis , Wireless communication systems , L2TP (Computer network protocol) , Computer network protocols , Streaming audio , Streaming video
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4633 , http://hdl.handle.net/10962/d1006521 , Bluetooth technology , Mobile communication systems , Communication -- Technological innovations , Communication -- Network analysis , Wireless communication systems , L2TP (Computer network protocol) , Computer network protocols , Streaming audio , Streaming video
- Description: With the increase in bandwidth, more widespread distribution of media, and increased capability of mobile devices, multimedia streaming has not only become feasible, but more economical in terms of space occupied by the media file and the costs involved in attaining it. Although much attention has been paid to peer to peer media streaming over the Internet using HTTP and RTSP, little research has focussed on the use of the Bluetooth protocol for streaming audio and video between mobile devices. This project investigates the feasibility of Bluetooth as a protocol for audio and video streaming between mobile phones using the J2ME platform, through the analysis of Bluetooth protocols, media formats, optimum packet sizes, and the effects of distance on transfer speed. A comparison was made between RFCOMM and L2CAP to determine which protocol could support the fastest transfer speed between two mobile devices. The L2CAP protocol proved to be the most suitable, providing average transfer rates of 136.17 KBps. Using this protocol a second experiment was undertaken to determine the most suitable media format for streaming in terms of: file size, bandwidth usage, quality, and ease of implementation. Out of the eight media formats investigated, the MP3 format provided the smallest file size, smallest bandwidth usage, best quality and highest ease of implementation. Another experiment was conducted to determine the optimum packet size for transfer between devices. A tradeoff was found between packet size and the quality of the sound file, with highest transfer rates being recorded with the MTU size of 668 bytes (136.58 KBps). The class of Bluetooth transmitter typically used in mobile devices (class 2) is considered a weak signal and is adversely affected by distance. As such, the final investigation that was undertaken was aimed at determining the effects of distance on audio streaming and playback. As can be expected, when devices were situated close to each other, the transfer speeds obtained were higher than when devices were far apart. Readings were taken at varying distances (1-15 metres), with erratic transfer speeds observed from 7 metres onwards. This research showed that audio streaming on the J2ME platform is feasible, however using the currently available class of Bluetooth transmitter, video streaming is not feasible. Video files were only playable once the entire media file had been transferred.
- Full Text:
- Date Issued: 2011
- Authors: Sahd, Curtis Lee
- Date: 2011 , 2010-09-09
- Subjects: Bluetooth technology , Mobile communication systems , Communication -- Technological innovations , Communication -- Network analysis , Wireless communication systems , L2TP (Computer network protocol) , Computer network protocols , Streaming audio , Streaming video
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4633 , http://hdl.handle.net/10962/d1006521 , Bluetooth technology , Mobile communication systems , Communication -- Technological innovations , Communication -- Network analysis , Wireless communication systems , L2TP (Computer network protocol) , Computer network protocols , Streaming audio , Streaming video
- Description: With the increase in bandwidth, more widespread distribution of media, and increased capability of mobile devices, multimedia streaming has not only become feasible, but more economical in terms of space occupied by the media file and the costs involved in attaining it. Although much attention has been paid to peer to peer media streaming over the Internet using HTTP and RTSP, little research has focussed on the use of the Bluetooth protocol for streaming audio and video between mobile devices. This project investigates the feasibility of Bluetooth as a protocol for audio and video streaming between mobile phones using the J2ME platform, through the analysis of Bluetooth protocols, media formats, optimum packet sizes, and the effects of distance on transfer speed. A comparison was made between RFCOMM and L2CAP to determine which protocol could support the fastest transfer speed between two mobile devices. The L2CAP protocol proved to be the most suitable, providing average transfer rates of 136.17 KBps. Using this protocol a second experiment was undertaken to determine the most suitable media format for streaming in terms of: file size, bandwidth usage, quality, and ease of implementation. Out of the eight media formats investigated, the MP3 format provided the smallest file size, smallest bandwidth usage, best quality and highest ease of implementation. Another experiment was conducted to determine the optimum packet size for transfer between devices. A tradeoff was found between packet size and the quality of the sound file, with highest transfer rates being recorded with the MTU size of 668 bytes (136.58 KBps). The class of Bluetooth transmitter typically used in mobile devices (class 2) is considered a weak signal and is adversely affected by distance. As such, the final investigation that was undertaken was aimed at determining the effects of distance on audio streaming and playback. As can be expected, when devices were situated close to each other, the transfer speeds obtained were higher than when devices were far apart. Readings were taken at varying distances (1-15 metres), with erratic transfer speeds observed from 7 metres onwards. This research showed that audio streaming on the J2ME platform is feasible, however using the currently available class of Bluetooth transmitter, video streaming is not feasible. Video files were only playable once the entire media file had been transferred.
- Full Text:
- Date Issued: 2011
User-interface evaluation metrics for a typical M-Learning application
- Authors: Kantore, Adelin
- Date: 2011
- Subjects: User interfaces (Computer systems) , Mobile communication systems
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:9749 , http://hdl.handle.net/10948/1452 , User interfaces (Computer systems) , Mobile communication systems
- Description: Usability is seen as an important aspect for the quality of an M-learning application. Yet very little research has been conducted in this area – particularly in South Africa. Even though the trials of M-learning projects have been witnessed in the country during the last five years, very little is known about the systems that were implemented as regards their usability. Additionally, metrics and measures used in evaluating usability have not been reported. A need exists for relevant metrics to M-learning usability. The primary objective of this work was to propose metrics and measures – for the purpose of evaluating the User-Interfacedesign usability of M-learning application. The research included a literature review of M-learning, as well as the development of metrics and measures based on the Goal Question Metric (GQM) Model. This model has helped provide a reference model and measurements for evaluating the User-InterfaceUsability. A case study was used as a research strategy. An application called Kontax was selected for evaluation by users and expert reviewers. Data-collection methods consisted of User Testing and Heuristics evaluations. Data-gathering instruments included the use of surveys and user- satisfaction questionnaires based on the proposed metrics, task scenarios and expert-reviewed questionnaires based on the proposed metrics; all these instruments were developed. It was found that, although the users thought the system was very interesting, and they wished to hear more about it in the future, the system nevertheless had usability flaws which made it difficult to use. All the users failed to register so that they could use the system; additionally, the system-error messages did not help the users recognize, and recover from an error – leaving the user to simply log out. Help was not adequate, thus making it difficult for first-time users to know what to do when they needed support. The system was also said to have a lot of information presented on its home page, which caused the user to be disoriented. The Kontax application has usability flaws which should be III attended to, in order to improve its usability. The proposed metrics proved to be very useful in evaluating the usability of the tool.
- Full Text:
- Date Issued: 2011
- Authors: Kantore, Adelin
- Date: 2011
- Subjects: User interfaces (Computer systems) , Mobile communication systems
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:9749 , http://hdl.handle.net/10948/1452 , User interfaces (Computer systems) , Mobile communication systems
- Description: Usability is seen as an important aspect for the quality of an M-learning application. Yet very little research has been conducted in this area – particularly in South Africa. Even though the trials of M-learning projects have been witnessed in the country during the last five years, very little is known about the systems that were implemented as regards their usability. Additionally, metrics and measures used in evaluating usability have not been reported. A need exists for relevant metrics to M-learning usability. The primary objective of this work was to propose metrics and measures – for the purpose of evaluating the User-Interfacedesign usability of M-learning application. The research included a literature review of M-learning, as well as the development of metrics and measures based on the Goal Question Metric (GQM) Model. This model has helped provide a reference model and measurements for evaluating the User-InterfaceUsability. A case study was used as a research strategy. An application called Kontax was selected for evaluation by users and expert reviewers. Data-collection methods consisted of User Testing and Heuristics evaluations. Data-gathering instruments included the use of surveys and user- satisfaction questionnaires based on the proposed metrics, task scenarios and expert-reviewed questionnaires based on the proposed metrics; all these instruments were developed. It was found that, although the users thought the system was very interesting, and they wished to hear more about it in the future, the system nevertheless had usability flaws which made it difficult to use. All the users failed to register so that they could use the system; additionally, the system-error messages did not help the users recognize, and recover from an error – leaving the user to simply log out. Help was not adequate, thus making it difficult for first-time users to know what to do when they needed support. The system was also said to have a lot of information presented on its home page, which caused the user to be disoriented. The Kontax application has usability flaws which should be III attended to, in order to improve its usability. The proposed metrics proved to be very useful in evaluating the usability of the tool.
- Full Text:
- Date Issued: 2011
- «
- ‹
- 1
- ›
- »