An investigation into the introduction of process analytical technology, using near infrared analysis, to selected pharmaceutical processes
- Authors: Naicker, Krishnaveni
- Date: 2007
- Subjects: Near infrared spectroscopy , Pharmaceutical chemistry
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10153 , http://hdl.handle.net/10948/577 , http://hdl.handle.net/10948/d1011710 , Near infrared spectroscopy , Pharmaceutical chemistry
- Description: Introduction: Process analytical technologies are systems for the analysis and control of manufacturing processes to assure acceptable end-product quality. This is achieved by timely measurements of critical parameters and performance attributes of raw material and in-process material and processes. The introduction of process analytical technology using near infrared analysis was investigated in three areas, namely incoming raw material analysis, blend uniformity analysis and moisture determination in the fluid bed dryer. Methodology: Incoming raw material identification - The FOSS XDS rapid content analyzer was used for the development of a NIR method for the identification and material qualification of starch maize and lactose monohydrate. Blend uniformity analysis – The SP15 Laboratory Blender fitted with near infrared probe was utilized for the study. Two types of blend experiments were designed to monitor the distribution of magnesium stearate (lubricant) in the blend, namely, a powder blend utilizing lactose monohydrate and a granule blend utilizing Ridaq® granule. Software methods were developed to monitor the standard deviation of the absorbance at the wavelengths that were specific for lactose monohydrate, Ridaq® granule and magnesium stearate. To confirm the prediction of end-point using near infrared, results were verified using an atomic absorption method for magnesium stearate. The blends were sampled at the selected time intervals corresponding to three states of the blend, namely, before end-point, at end-point and after end-point using a sampling plan. An additional six blends were conducted for the granule blend and sampled when the standard deviation had reached a value below 3 x 10-6 at the magnesium stearate wavelength at four consecutive data points (standard deviation value extrapolated from blends carried out to predetermined time intervals). Moisture determination in the fluid bed dryer – Moisture values for two products (Product A and Product B) were retrospectively collected from past production batches. A process capability study was conducted on the moisture values to determine if the current process was in a state of control. Results and Discussion: Incoming raw material identification – The algorithms used for the spectral library were able to distinguish between the raw materials selected. The spectral library positively identified the starch maize and lactose monohydrate samples that were not present in the library. The negative challenge with pregelatinised starch and tablettose demonstrated that the spectral library was able to differentiate between closely related compounds. Blend uniformity analysis – Blends sampled at the predetermined time intervals demonstrated a homogeneous state when the standard deviation of the absorbance was low and a non-homogeneous state when the standard deviation of the absorbance was high, thus near infrared prediction on the state of the blend was confirmed by the standard analytical methods. The series of Ridaq® granule and magnesium stearate blends sampled when the standard deviation was below 3 x 10-6 were homogeneous with the exception of one blend that was marginally out of specification. Blend durations were significantly lower than the standard blend durations used in the facility and ranged from 112 to 198 seconds. Moisture determination in the fluid bed dryer – From the process capability study of the two products it was noted that Product A is stable but can still be optimized while Product B is at a desirable state. The statistical evaluation of the moisture values for Product A and Product B demonstrated that the use of the product temperature to monitor the moisture gave consistent results. The current process is stable and capable of producing repeatable results although near infrared provides a means for continuously monitoring the product moisture and allows one to take action to prevent over-drying or under-drying. Conclusion: From the investigations conducted, it can be seen that there is definitely a niche for process analytical technology at this pharmaceutical company. The implementation is a gradual process of change, which may take time, probably several years (Heinze & Hansen 2005).
- Full Text:
- Date Issued: 2007
- Authors: Naicker, Krishnaveni
- Date: 2007
- Subjects: Near infrared spectroscopy , Pharmaceutical chemistry
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10153 , http://hdl.handle.net/10948/577 , http://hdl.handle.net/10948/d1011710 , Near infrared spectroscopy , Pharmaceutical chemistry
- Description: Introduction: Process analytical technologies are systems for the analysis and control of manufacturing processes to assure acceptable end-product quality. This is achieved by timely measurements of critical parameters and performance attributes of raw material and in-process material and processes. The introduction of process analytical technology using near infrared analysis was investigated in three areas, namely incoming raw material analysis, blend uniformity analysis and moisture determination in the fluid bed dryer. Methodology: Incoming raw material identification - The FOSS XDS rapid content analyzer was used for the development of a NIR method for the identification and material qualification of starch maize and lactose monohydrate. Blend uniformity analysis – The SP15 Laboratory Blender fitted with near infrared probe was utilized for the study. Two types of blend experiments were designed to monitor the distribution of magnesium stearate (lubricant) in the blend, namely, a powder blend utilizing lactose monohydrate and a granule blend utilizing Ridaq® granule. Software methods were developed to monitor the standard deviation of the absorbance at the wavelengths that were specific for lactose monohydrate, Ridaq® granule and magnesium stearate. To confirm the prediction of end-point using near infrared, results were verified using an atomic absorption method for magnesium stearate. The blends were sampled at the selected time intervals corresponding to three states of the blend, namely, before end-point, at end-point and after end-point using a sampling plan. An additional six blends were conducted for the granule blend and sampled when the standard deviation had reached a value below 3 x 10-6 at the magnesium stearate wavelength at four consecutive data points (standard deviation value extrapolated from blends carried out to predetermined time intervals). Moisture determination in the fluid bed dryer – Moisture values for two products (Product A and Product B) were retrospectively collected from past production batches. A process capability study was conducted on the moisture values to determine if the current process was in a state of control. Results and Discussion: Incoming raw material identification – The algorithms used for the spectral library were able to distinguish between the raw materials selected. The spectral library positively identified the starch maize and lactose monohydrate samples that were not present in the library. The negative challenge with pregelatinised starch and tablettose demonstrated that the spectral library was able to differentiate between closely related compounds. Blend uniformity analysis – Blends sampled at the predetermined time intervals demonstrated a homogeneous state when the standard deviation of the absorbance was low and a non-homogeneous state when the standard deviation of the absorbance was high, thus near infrared prediction on the state of the blend was confirmed by the standard analytical methods. The series of Ridaq® granule and magnesium stearate blends sampled when the standard deviation was below 3 x 10-6 were homogeneous with the exception of one blend that was marginally out of specification. Blend durations were significantly lower than the standard blend durations used in the facility and ranged from 112 to 198 seconds. Moisture determination in the fluid bed dryer – From the process capability study of the two products it was noted that Product A is stable but can still be optimized while Product B is at a desirable state. The statistical evaluation of the moisture values for Product A and Product B demonstrated that the use of the product temperature to monitor the moisture gave consistent results. The current process is stable and capable of producing repeatable results although near infrared provides a means for continuously monitoring the product moisture and allows one to take action to prevent over-drying or under-drying. Conclusion: From the investigations conducted, it can be seen that there is definitely a niche for process analytical technology at this pharmaceutical company. The implementation is a gradual process of change, which may take time, probably several years (Heinze & Hansen 2005).
- Full Text:
- Date Issued: 2007
The medicinal chemistry of cyclo (Ser-Ser) and cyclo (Ser-Tyr)
- Authors: Kritzinger, André Louis
- Date: 2007
- Subjects: Cyclic peptides , Peptide drugs -- Therapeutic use , Haematostasis , Pharmaceutical chemistry
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10155 , http://hdl.handle.net/10948/537 , http://hdl.handle.net/10948/d1011712 , Cyclic peptides , Peptide drugs -- Therapeutic use , Haematostasis , Pharmaceutical chemistry
- Description: Cyclic dipeptides are widely used as models for larger peptides because of their simplicity and limited conformational freedom. Some cyclic dipeptides have been shown to produce antiviral, antibiotic and anti-tumour activity (Milne et al., 1998). In this study the cyclic dipeptides, cyclo(Ser-Ser) and cyclo(Ser-Tyr), were synthesised from their corresponding linear precursors using a modified phenolinduced cyclisation procedure. The phenol-induced cyclisation procedure resulted in good yields and purity of the cyclic dipeptides. Quantitative analysis and evaluation of the physicochemical properties of the cyclic dipeptides was achieved by using high-performance liquid chromatography, scanning electron microscopy, thermal analysis and X-ray powder diffraction. The structures of the synthesised cyclic dipeptides were elucidated using infrared spectroscopy, mass spectrometry, nuclear magnetic resonance spectroscopy and molecular modelling. The study aimed to determine the biological activity of cyclo(Ser-Ser) and cyclo(Ser-Tyr) with respect to their anticancer, antimicrobial, haematological and cardiac effects. Anticancer studies revealed that cyclo(Ser-Ser) and cyclo(Ser- Tyr) inhibited the growth of HeLa (cervical cancer), HT-29 (colon cancer) and MCF (breast cancer) cancer cell lines. Both cyclic dipeptides also inhibited the growth of certain selected Gram-positive, Gram-negative and fungal microorganisms in the antimicrobial study. Although the inhibition of growth in the anticancer and antimicrobial studies was statistically significant, the clinical relevance is questionable, since the inhibition produced by both cyclic dipeptides was very limited compared to other pre-existing anticancer and antimicrobial agents. Cyclo(Ser-Tyr) exhibited significant activity in the haematological studies, where it increased the rate of calcium induced-coagulation, and decreased the rate of streptokinase-induced fibrinolysis. Both cyclic dipeptides, however, failed to produce any significant effects on thrombin-substrate binding and ADPinduced platelet aggregation. Cardiac studies revealed that cyclo(Ser-Ser) and especially cyclo(Ser-Tyr) reduced the heart rate, coronary flow rate and ventricular pressure of isolated rat hearts.
- Full Text:
- Date Issued: 2007
- Authors: Kritzinger, André Louis
- Date: 2007
- Subjects: Cyclic peptides , Peptide drugs -- Therapeutic use , Haematostasis , Pharmaceutical chemistry
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10155 , http://hdl.handle.net/10948/537 , http://hdl.handle.net/10948/d1011712 , Cyclic peptides , Peptide drugs -- Therapeutic use , Haematostasis , Pharmaceutical chemistry
- Description: Cyclic dipeptides are widely used as models for larger peptides because of their simplicity and limited conformational freedom. Some cyclic dipeptides have been shown to produce antiviral, antibiotic and anti-tumour activity (Milne et al., 1998). In this study the cyclic dipeptides, cyclo(Ser-Ser) and cyclo(Ser-Tyr), were synthesised from their corresponding linear precursors using a modified phenolinduced cyclisation procedure. The phenol-induced cyclisation procedure resulted in good yields and purity of the cyclic dipeptides. Quantitative analysis and evaluation of the physicochemical properties of the cyclic dipeptides was achieved by using high-performance liquid chromatography, scanning electron microscopy, thermal analysis and X-ray powder diffraction. The structures of the synthesised cyclic dipeptides were elucidated using infrared spectroscopy, mass spectrometry, nuclear magnetic resonance spectroscopy and molecular modelling. The study aimed to determine the biological activity of cyclo(Ser-Ser) and cyclo(Ser-Tyr) with respect to their anticancer, antimicrobial, haematological and cardiac effects. Anticancer studies revealed that cyclo(Ser-Ser) and cyclo(Ser- Tyr) inhibited the growth of HeLa (cervical cancer), HT-29 (colon cancer) and MCF (breast cancer) cancer cell lines. Both cyclic dipeptides also inhibited the growth of certain selected Gram-positive, Gram-negative and fungal microorganisms in the antimicrobial study. Although the inhibition of growth in the anticancer and antimicrobial studies was statistically significant, the clinical relevance is questionable, since the inhibition produced by both cyclic dipeptides was very limited compared to other pre-existing anticancer and antimicrobial agents. Cyclo(Ser-Tyr) exhibited significant activity in the haematological studies, where it increased the rate of calcium induced-coagulation, and decreased the rate of streptokinase-induced fibrinolysis. Both cyclic dipeptides, however, failed to produce any significant effects on thrombin-substrate binding and ADPinduced platelet aggregation. Cardiac studies revealed that cyclo(Ser-Ser) and especially cyclo(Ser-Tyr) reduced the heart rate, coronary flow rate and ventricular pressure of isolated rat hearts.
- Full Text:
- Date Issued: 2007
Solid-phase extraction based sample preparation for the determination of drug and organic pollutant residue
- Authors: Pule, Bellah Oreeditse
- Date: 2011 , 2011-02-08
- Subjects: Food contamination , Drugs -- Analysis , Pharmaceutical chemistry , Extraction (Chemistry) , Sorbents
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4406 , http://hdl.handle.net/10962/d1006711 , Food contamination , Drugs -- Analysis , Pharmaceutical chemistry , Extraction (Chemistry) , Sorbents
- Description: This thesis presents solid phase extraction (SPE) methodologies based on mixed-mode polymeric sorbents; a mixed mode strong anion exchanger (Agilent SampliQ SAX) and a mixed mode strong cation exchanger (Agilent SampliQ SCX). Furthermore, dispersive-SPE based on a quick, easy, cheap, effective, rugged and safe (QuEChERS) method was assessed for applicability in the determination of drug residues. The mixed-mode polymeric sorbents were evaluated for the simultaneous fractionation of drugs that exhibit diverse polarities with acidic, basic and neutral functionalities in biological matrices (plasma and urine). The polymeric skeleton of these sorbents entails an exchanger group and therefore provides two retention mechanisms, strong cation or anion exchange retention mechanisms with hydrophobic interactions. It was demonstrated that with a sequential elution protocol for sample clean-up analytes were fractionated into acidic, basic and neutral classes. The SAX was employed for analysis of ketoprofen, naproxen (acidic drugs), nortriptyline (basic) and secobarbital (neutral) from urine sample. The SCX was used for fractionating phenobarbital, p-toluamide (acidic), amphetamine, m-toluidine (basic) and acetaminophen (neutral drug) from plasma sample. QuEChERS method was employed for quantitative determination of 16 polycyclic aromatic hydrocarbons (PAHs) from fish fillets and soil; 9 sulfonamides (SAs) from chicken muscles and acrylamide (AA) in cooking oil. The analyte recoveries ranged from 79.6 - 109% with RSDs ranging from 0.06 - 1.9% at three different fortification levels. Good linearity (r2 > 0.9990) was attained for most analytes. The limits of detection and quantification ranged from 0.03 - 0.84 μg/ml and 0.81 - 1.89 μg/ml respectively for analytes in biological samples. LODs and LOQs for analytes in food and environmental samples ranged from 0.02 to 0.39 and 0.25 to 1.30 ng/g respectively.
- Full Text:
- Date Issued: 2011
- Authors: Pule, Bellah Oreeditse
- Date: 2011 , 2011-02-08
- Subjects: Food contamination , Drugs -- Analysis , Pharmaceutical chemistry , Extraction (Chemistry) , Sorbents
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4406 , http://hdl.handle.net/10962/d1006711 , Food contamination , Drugs -- Analysis , Pharmaceutical chemistry , Extraction (Chemistry) , Sorbents
- Description: This thesis presents solid phase extraction (SPE) methodologies based on mixed-mode polymeric sorbents; a mixed mode strong anion exchanger (Agilent SampliQ SAX) and a mixed mode strong cation exchanger (Agilent SampliQ SCX). Furthermore, dispersive-SPE based on a quick, easy, cheap, effective, rugged and safe (QuEChERS) method was assessed for applicability in the determination of drug residues. The mixed-mode polymeric sorbents were evaluated for the simultaneous fractionation of drugs that exhibit diverse polarities with acidic, basic and neutral functionalities in biological matrices (plasma and urine). The polymeric skeleton of these sorbents entails an exchanger group and therefore provides two retention mechanisms, strong cation or anion exchange retention mechanisms with hydrophobic interactions. It was demonstrated that with a sequential elution protocol for sample clean-up analytes were fractionated into acidic, basic and neutral classes. The SAX was employed for analysis of ketoprofen, naproxen (acidic drugs), nortriptyline (basic) and secobarbital (neutral) from urine sample. The SCX was used for fractionating phenobarbital, p-toluamide (acidic), amphetamine, m-toluidine (basic) and acetaminophen (neutral drug) from plasma sample. QuEChERS method was employed for quantitative determination of 16 polycyclic aromatic hydrocarbons (PAHs) from fish fillets and soil; 9 sulfonamides (SAs) from chicken muscles and acrylamide (AA) in cooking oil. The analyte recoveries ranged from 79.6 - 109% with RSDs ranging from 0.06 - 1.9% at three different fortification levels. Good linearity (r2 > 0.9990) was attained for most analytes. The limits of detection and quantification ranged from 0.03 - 0.84 μg/ml and 0.81 - 1.89 μg/ml respectively for analytes in biological samples. LODs and LOQs for analytes in food and environmental samples ranged from 0.02 to 0.39 and 0.25 to 1.30 ng/g respectively.
- Full Text:
- Date Issued: 2011
The medicinal chemistry of cyclo(D-Phe-2Cl-Pro) and cyclo(Phe-4F-Pro)
- Authors: Ndung'u, Susan Wanjiru
- Date: 2011
- Subjects: Peptide drugs , Cyclic peptides , Pharmaceutical chemistry , Peptides -- Synthesis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/7083 , vital:21223
- Description: Although peptides and proteins are considered as lead compounds for the discovery and development of new therapeutic agents, poor metabolic and physical properties have limited their optimisation as drug candidates (Adessi & Soto, 2002). Research by medicinal chemists however, generated the discovery of structural similarities between some peptides and diketopiperazines and the common occurrence of such compounds in natural products. This discovery initiated the synthesis of diketopiperazines from amino acids in an attempt to bypass the previously mentioned limitations of using peptides as drug candidates (Dinsmore & Beshore, 2002). Diketopiperazines (DKPs) are the simplest form of cyclic dipeptides, and a class of unexplored bioactive peptides that have great potential for the future. The compounds are relatively simple to synthesise and are prevalent in nature (Prasad, 1995). The DKP backbone is rigid and therefore poses conformational constraint on the compounds. This rigidity allows for simple conformational analysis of the compounds and also gives insight into the conformational requirements for interaction with the targets involved in their biological activity. The reduced conformational freedom also increases the receptor specificity and thus the compounds are proposed to have less unfavourable effects (Anteunis, 1978). The aim of the study was to synthesise compounds that would exhibit metabolic stability, receptor specificity and enhanced lipophilicity which would increase the bioavailability of the compounds. This was to be achieved by the introduction of fluorine and chlorine elements into the DKPs. The structure of the DKPs would be altered which in turn would improve the physicochemical properties and the biological activity of the compounds (Naumann, 1999). Cyclo(D-Phe-2Cl-Pro) and cyclo(Phe-4F-Pro) were synthesised using the method of Milne et al. (1992) and by boiling the linear counterparts under reflux in sec-butanol-toluene. The structures of the synthesised DKPs were elucidated using mass spectrometry, nuclear magnetic resonance spectroscopy, infrared spectroscopy and molecular modeling. Qualitative analysis and evaluation of the physicochemical properties of the DKPs were performed using high-performance liquid chromatography, scanning electron microscopy, thermogravimetric analysis, differential scanning calorimetry and x-ray powder diffraction. The study aimed to determine the biological activity of cyclo(D-Phe-2Cl-Pro) and cyclo(Phe-4F-Pro) with respect to their anticancer, antimicrobial, haematological and antidiabetic effects. The anticancer results obtained indicated that the percentage inhibition produced by both DKPs were lower than those proposed by Graz et al. (2000) for proline-containing DKPs where, a greater than 50% inhibition was observed for cyclo(Phe-Pro). Antimicrobial studies revealed that both DKPs demonstrated marginal effects on Gram-positive and Gram-negative organisms but showed significant effects against C. albicans. The haematological studies revealed that cyclo(D-Phe-2Cl-Pro) at a screening concentration of 12.5 mM, significantly decreased the levels of D-dimer (P < 0.0001). The antidiabetics studies showed limited activity of the DKPs in inhibiting the activity of α-glucosidase and α-amylase enzymes.
- Full Text:
- Date Issued: 2011
- Authors: Ndung'u, Susan Wanjiru
- Date: 2011
- Subjects: Peptide drugs , Cyclic peptides , Pharmaceutical chemistry , Peptides -- Synthesis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/7083 , vital:21223
- Description: Although peptides and proteins are considered as lead compounds for the discovery and development of new therapeutic agents, poor metabolic and physical properties have limited their optimisation as drug candidates (Adessi & Soto, 2002). Research by medicinal chemists however, generated the discovery of structural similarities between some peptides and diketopiperazines and the common occurrence of such compounds in natural products. This discovery initiated the synthesis of diketopiperazines from amino acids in an attempt to bypass the previously mentioned limitations of using peptides as drug candidates (Dinsmore & Beshore, 2002). Diketopiperazines (DKPs) are the simplest form of cyclic dipeptides, and a class of unexplored bioactive peptides that have great potential for the future. The compounds are relatively simple to synthesise and are prevalent in nature (Prasad, 1995). The DKP backbone is rigid and therefore poses conformational constraint on the compounds. This rigidity allows for simple conformational analysis of the compounds and also gives insight into the conformational requirements for interaction with the targets involved in their biological activity. The reduced conformational freedom also increases the receptor specificity and thus the compounds are proposed to have less unfavourable effects (Anteunis, 1978). The aim of the study was to synthesise compounds that would exhibit metabolic stability, receptor specificity and enhanced lipophilicity which would increase the bioavailability of the compounds. This was to be achieved by the introduction of fluorine and chlorine elements into the DKPs. The structure of the DKPs would be altered which in turn would improve the physicochemical properties and the biological activity of the compounds (Naumann, 1999). Cyclo(D-Phe-2Cl-Pro) and cyclo(Phe-4F-Pro) were synthesised using the method of Milne et al. (1992) and by boiling the linear counterparts under reflux in sec-butanol-toluene. The structures of the synthesised DKPs were elucidated using mass spectrometry, nuclear magnetic resonance spectroscopy, infrared spectroscopy and molecular modeling. Qualitative analysis and evaluation of the physicochemical properties of the DKPs were performed using high-performance liquid chromatography, scanning electron microscopy, thermogravimetric analysis, differential scanning calorimetry and x-ray powder diffraction. The study aimed to determine the biological activity of cyclo(D-Phe-2Cl-Pro) and cyclo(Phe-4F-Pro) with respect to their anticancer, antimicrobial, haematological and antidiabetic effects. The anticancer results obtained indicated that the percentage inhibition produced by both DKPs were lower than those proposed by Graz et al. (2000) for proline-containing DKPs where, a greater than 50% inhibition was observed for cyclo(Phe-Pro). Antimicrobial studies revealed that both DKPs demonstrated marginal effects on Gram-positive and Gram-negative organisms but showed significant effects against C. albicans. The haematological studies revealed that cyclo(D-Phe-2Cl-Pro) at a screening concentration of 12.5 mM, significantly decreased the levels of D-dimer (P < 0.0001). The antidiabetics studies showed limited activity of the DKPs in inhibiting the activity of α-glucosidase and α-amylase enzymes.
- Full Text:
- Date Issued: 2011
The medicinal chemistry of Cyclo (D-PHE-4I-PRO) and Cyclo (L-PHE-4I-PRO)
- Authors: Qhola, Lipolelo
- Date: 2012
- Subjects: Cyclic peptides , Pharmaceutical chemistry , Peptide drugs
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10152 , http://hdl.handle.net/10948/d1011619 , Cyclic peptides , Pharmaceutical chemistry , Peptide drugs
- Description: Cyclic dipeptides have been widely used as pharmaceutical agents due to their favourable properties and the fact that they are more stable and membrane permeable than their linear analogues. These characteristics make cyclic dipeptides attractive to protein-based drug developers (Martins & Carvalho, 2007). In this research study, the method of Milne et al. (1992) was used to synthesize the protected linear dipeptide esters. This was followed by boiling the unprotected, linear dipeptide esters under reflux in an oil bath (Sec-butanol: toluene (4:1)). This method gave good yields and pure cyclic dipeptides. Scanning electron microscopy, thermal analysis, X-ray powder diffraction and differential scanning calorimetry were used for evaluation of the physiochemical properties of the cyclic dipeptides. High-performance liquid chromatography and thin layer chromatography were used to determine the purity of the cyclic dipeptides. The structures of the cyclic dipeptides were elucidated using infrared spectroscopy, mass spectrometry, nuclear magnetic resonance spectroscopy and molecular modeling and computational chemistry. The aim of the study was to determine the possible therapeutic activity of cyclo(D-Phe-4I-Pro) and cyclo(L-Phe-4I-Pro) with regard to antimicrobial, anticancer, antidiabetes and haematological effects. Both cyclic dipeptides showed a significant growth inhibition of Gram-positive, Gram-negative and fungal microorganisms in the antimicrobial study. Anticancer studies showed that both cyclic dipeptides caused growth inhibition of the MCF-7, HT-29 and HeLa cancer cell lines. Both cyclic dipeptides showed no antidiabetic activity. Haematological studies revealed that both cyclic dipeptides caused a significant effect on the clotting time and platelet aggregation. They caused an increase in clotting time and also inhibited platelet aggregation.
- Full Text:
- Date Issued: 2012
- Authors: Qhola, Lipolelo
- Date: 2012
- Subjects: Cyclic peptides , Pharmaceutical chemistry , Peptide drugs
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10152 , http://hdl.handle.net/10948/d1011619 , Cyclic peptides , Pharmaceutical chemistry , Peptide drugs
- Description: Cyclic dipeptides have been widely used as pharmaceutical agents due to their favourable properties and the fact that they are more stable and membrane permeable than their linear analogues. These characteristics make cyclic dipeptides attractive to protein-based drug developers (Martins & Carvalho, 2007). In this research study, the method of Milne et al. (1992) was used to synthesize the protected linear dipeptide esters. This was followed by boiling the unprotected, linear dipeptide esters under reflux in an oil bath (Sec-butanol: toluene (4:1)). This method gave good yields and pure cyclic dipeptides. Scanning electron microscopy, thermal analysis, X-ray powder diffraction and differential scanning calorimetry were used for evaluation of the physiochemical properties of the cyclic dipeptides. High-performance liquid chromatography and thin layer chromatography were used to determine the purity of the cyclic dipeptides. The structures of the cyclic dipeptides were elucidated using infrared spectroscopy, mass spectrometry, nuclear magnetic resonance spectroscopy and molecular modeling and computational chemistry. The aim of the study was to determine the possible therapeutic activity of cyclo(D-Phe-4I-Pro) and cyclo(L-Phe-4I-Pro) with regard to antimicrobial, anticancer, antidiabetes and haematological effects. Both cyclic dipeptides showed a significant growth inhibition of Gram-positive, Gram-negative and fungal microorganisms in the antimicrobial study. Anticancer studies showed that both cyclic dipeptides caused growth inhibition of the MCF-7, HT-29 and HeLa cancer cell lines. Both cyclic dipeptides showed no antidiabetic activity. Haematological studies revealed that both cyclic dipeptides caused a significant effect on the clotting time and platelet aggregation. They caused an increase in clotting time and also inhibited platelet aggregation.
- Full Text:
- Date Issued: 2012
The medicinal chemistry of cyclo(Phe-4CI-Pro) and Cyclo(D-Phe-4CI-Pro)
- Authors: Milne, Marnus
- Date: 2012
- Subjects: Cyclic peptides , Pharmaceutical chemistry , Peptide drugs
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10157 , http://hdl.handle.net/10948/d1011848 , Cyclic peptides , Pharmaceutical chemistry , Peptide drugs
- Description: Cyclic dipeptides have limited conformational freedom due to their diketopiperazine backbone and their small size. They are relatively simple to synthesise, making them ideal subjects for investigation into their biological effects. Cyclic dipeptides have also been known for their multitude of biological activities, including antimicrobial, anticancer and haematological properties. In this study the cyclic dipeptides, cyclo(Phe-4Cl-Pro) and cyclo(D-Phe-4Cl-Pro), were synthesised from their corresponding linear precursors using a modified phenol-induced cyclisation procedure. The phenol induced cyclisation procedure resulted in good yields and purity of the cyclic dipeptides. Quantitative analysis and evaluation of the physiochemical properties of the cyclic dipeptides was achieved using high-performance liquid chromatography, scanning electron microscopy, thermal analysis and X-ray powder diffraction. Structural elucidation of the cyclic dipeptides was done by means of infrared spectroscopy, mass spectroscopy, nuclear magnetic resonance spectroscopy and molecular modelling. The study‟s aim was to determine the biological activity of cyclo(Phe-4Cl-Pro) and cyclo(D-Phe-4Cl-Pro) with respect to their anticancer, antimicrobial, haematological and ant-diabetic studies. Anticancer studies revealed that cyclo(Phe-4Cl-Pro) and cyclo(D-Phe-4Cl-Pro) inhibited the growth of HeLa (cervical cancer), HT-29 (colon cancer) and MCF-7 (breast cancer) cancer cell lines. Both cyclic dipeptides also inhibited the growth of certain selected Gram-positive, Gram-negative and fungal microorganisms in the antimicrobial study. Although the inhibition of growth in the anticancer and antimicrobial studies was statistically significant, the clinical relevance is questionable, since the inhibition produced by both cyclic dipeptides was very limited compared to other pre-existing anticancer and antimicrobial agents. Both cyclic dipeptides caused a significant shortening of the APTT and PT clotting times and an increase in the fibrin and D-Dimer formation. Cyclo(D-Phe-4Cl-Pro) at a screening concentration of 12.5 mM and 3.125 mM, showed significant anti-platelet activity. Both cyclic dipeptides failed to produce any inhibition of the α-Glucosidase enzyme and very limited inhibition of the α-Amylase enzyme.
- Full Text:
- Date Issued: 2012
- Authors: Milne, Marnus
- Date: 2012
- Subjects: Cyclic peptides , Pharmaceutical chemistry , Peptide drugs
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:10157 , http://hdl.handle.net/10948/d1011848 , Cyclic peptides , Pharmaceutical chemistry , Peptide drugs
- Description: Cyclic dipeptides have limited conformational freedom due to their diketopiperazine backbone and their small size. They are relatively simple to synthesise, making them ideal subjects for investigation into their biological effects. Cyclic dipeptides have also been known for their multitude of biological activities, including antimicrobial, anticancer and haematological properties. In this study the cyclic dipeptides, cyclo(Phe-4Cl-Pro) and cyclo(D-Phe-4Cl-Pro), were synthesised from their corresponding linear precursors using a modified phenol-induced cyclisation procedure. The phenol induced cyclisation procedure resulted in good yields and purity of the cyclic dipeptides. Quantitative analysis and evaluation of the physiochemical properties of the cyclic dipeptides was achieved using high-performance liquid chromatography, scanning electron microscopy, thermal analysis and X-ray powder diffraction. Structural elucidation of the cyclic dipeptides was done by means of infrared spectroscopy, mass spectroscopy, nuclear magnetic resonance spectroscopy and molecular modelling. The study‟s aim was to determine the biological activity of cyclo(Phe-4Cl-Pro) and cyclo(D-Phe-4Cl-Pro) with respect to their anticancer, antimicrobial, haematological and ant-diabetic studies. Anticancer studies revealed that cyclo(Phe-4Cl-Pro) and cyclo(D-Phe-4Cl-Pro) inhibited the growth of HeLa (cervical cancer), HT-29 (colon cancer) and MCF-7 (breast cancer) cancer cell lines. Both cyclic dipeptides also inhibited the growth of certain selected Gram-positive, Gram-negative and fungal microorganisms in the antimicrobial study. Although the inhibition of growth in the anticancer and antimicrobial studies was statistically significant, the clinical relevance is questionable, since the inhibition produced by both cyclic dipeptides was very limited compared to other pre-existing anticancer and antimicrobial agents. Both cyclic dipeptides caused a significant shortening of the APTT and PT clotting times and an increase in the fibrin and D-Dimer formation. Cyclo(D-Phe-4Cl-Pro) at a screening concentration of 12.5 mM and 3.125 mM, showed significant anti-platelet activity. Both cyclic dipeptides failed to produce any inhibition of the α-Glucosidase enzyme and very limited inhibition of the α-Amylase enzyme.
- Full Text:
- Date Issued: 2012
Synthesis of chromium carbene scaffolds for use in medicinal chemistry
- Rafael, Christopher Carlos Ferreira
- Authors: Rafael, Christopher Carlos Ferreira
- Date: 2014
- Subjects: Carbenes (Methylene compounds) , Pharmaceutical chemistry
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4456 , http://hdl.handle.net/10962/d1010863 , Carbenes (Methylene compounds) , Pharmaceutical chemistry
- Description: This study involves using methyllithium to synthesize Fischer carbene complexes as precursors for metal templated α,β-unsaturated complexes with potential as acceptors in the Baylis Hillman reaction as well as in Dötz benzannulation. Fischer carbene complexes contain low oxidation state metal centers, are electrophilic in nature and are stabilized by π-donating substituents such as alkoxy and amino groups. The increased electron withdrawing nature of the metal carbonyl moiety was expected to improve the rates of reaction compared to organic carbonyls. Four Fischer carbenes were synthesized via nucleophilic addition of MeLi to chromium and tungsten hexacarbonyl at low temperatures followed by alkylation using either a Meerwein salt (Me₃OBF₄) to give the desired Fischer metal methyl methoxy carbenes or Et₄NBr/alkylhalide to make the corresponding ethoxy and allyloxy carbenes. Characterization was by means of ¹³C NMR, ¹H NMR, and IR. In silico studies were carried out looking at the effect of substituents on the carbene bond. Synthesis of α,β-unsaturated complexes was effected via the aldol condensation route and found to be unfavorable using enolizable aldehydes, although the use of two aryl aldehydes resulted in successful preparation of two α,β-unsaturated complexes. Difficulty in the purification of these complexes hindered their full characterization. Computational studies looked at the effect of substituents on the system as well as variation of the metal from Cr to Mo and W. Synthesis of Baylis Hillman adducts using α,β-unsaturated complexes as acceptors was unsuccessful due to the ease of product oxidization. One potential product was obtained in its crude form although purification was not possible due to oxidation. Computational studies suggested that the oxygen on the ligand negatively impacts the stability of these Fischer carbene derived Baylis Hillman adducts promoting intramolecular oxidation of the metal. The α,β-unsaturated complexes and Baylis Hillman adducts were considered to be candidates to undergo Dötz benzannulation methodology. The use of the α,β-unsaturated complexes in this reaction was generally unsuccessful, both in the microwave and in conventional reflux conditions. Computational studies of these compounds were carried out to facilitate understanding of their stability and configuration.
- Full Text:
- Date Issued: 2014
- Authors: Rafael, Christopher Carlos Ferreira
- Date: 2014
- Subjects: Carbenes (Methylene compounds) , Pharmaceutical chemistry
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4456 , http://hdl.handle.net/10962/d1010863 , Carbenes (Methylene compounds) , Pharmaceutical chemistry
- Description: This study involves using methyllithium to synthesize Fischer carbene complexes as precursors for metal templated α,β-unsaturated complexes with potential as acceptors in the Baylis Hillman reaction as well as in Dötz benzannulation. Fischer carbene complexes contain low oxidation state metal centers, are electrophilic in nature and are stabilized by π-donating substituents such as alkoxy and amino groups. The increased electron withdrawing nature of the metal carbonyl moiety was expected to improve the rates of reaction compared to organic carbonyls. Four Fischer carbenes were synthesized via nucleophilic addition of MeLi to chromium and tungsten hexacarbonyl at low temperatures followed by alkylation using either a Meerwein salt (Me₃OBF₄) to give the desired Fischer metal methyl methoxy carbenes or Et₄NBr/alkylhalide to make the corresponding ethoxy and allyloxy carbenes. Characterization was by means of ¹³C NMR, ¹H NMR, and IR. In silico studies were carried out looking at the effect of substituents on the carbene bond. Synthesis of α,β-unsaturated complexes was effected via the aldol condensation route and found to be unfavorable using enolizable aldehydes, although the use of two aryl aldehydes resulted in successful preparation of two α,β-unsaturated complexes. Difficulty in the purification of these complexes hindered their full characterization. Computational studies looked at the effect of substituents on the system as well as variation of the metal from Cr to Mo and W. Synthesis of Baylis Hillman adducts using α,β-unsaturated complexes as acceptors was unsuccessful due to the ease of product oxidization. One potential product was obtained in its crude form although purification was not possible due to oxidation. Computational studies suggested that the oxygen on the ligand negatively impacts the stability of these Fischer carbene derived Baylis Hillman adducts promoting intramolecular oxidation of the metal. The α,β-unsaturated complexes and Baylis Hillman adducts were considered to be candidates to undergo Dötz benzannulation methodology. The use of the α,β-unsaturated complexes in this reaction was generally unsuccessful, both in the microwave and in conventional reflux conditions. Computational studies of these compounds were carried out to facilitate understanding of their stability and configuration.
- Full Text:
- Date Issued: 2014
Formulation and process optimisation of ethionamide 250 MGtablets using quality by design principles
- Authors: Isaacs, Nasreen
- Date: 2015
- Subjects: Pharmaceutical chemistry , Drugs -- Design , Pharmaceutical technology
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/3979 , vital:20497
- Description: The traditional approach of Quality by Testing (QbT) limits the assurance of product quality to in-process and post-production testing. To overcome these limitations, a more proactive and systematic means to product development and optimisation is required. Quality by Design (QbD) is an example of such an approach which focuses on understanding the product and its manufacturing process and emphasises that quality should be built into the product and not merely tested. The study aims to optimise ethionamide tablets, an immediate release oral solid dosage form using QbD.
- Full Text:
- Date Issued: 2015
Formulation and process optimisation of ethionamide 250 MGtablets using quality by design principles
- Authors: Isaacs, Nasreen
- Date: 2015
- Subjects: Pharmaceutical chemistry , Drugs -- Design , Pharmaceutical technology
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/3979 , vital:20497
- Description: The traditional approach of Quality by Testing (QbT) limits the assurance of product quality to in-process and post-production testing. To overcome these limitations, a more proactive and systematic means to product development and optimisation is required. Quality by Design (QbD) is an example of such an approach which focuses on understanding the product and its manufacturing process and emphasises that quality should be built into the product and not merely tested. The study aims to optimise ethionamide tablets, an immediate release oral solid dosage form using QbD.
- Full Text:
- Date Issued: 2015
Synthesis of L-menthyl glyoxylate, an important intermediate in the manufacture of ARVS, using flow chemistry technology
- Authors: Moyo, McQuillan
- Date: 2017
- Subjects: Chemistry , Pharmaceutical chemistry , Organic compounds -- Synthesis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/12019 , vital:27018
- Description: Herein an alternative approach to the conventional batch synthesis of L-menthyl glyoxylate hydrate (MGH), an important intermediate in the synthesis of drugs of importance is reported, through flow chemistry technology. MGH was initially synthesized in batch and various reaction parameters optimized. It was found to proceed to completion after 6 hours of esterifying glyoxylic acid with excess alcohol (L-menthol) in the presence of a catalyst, ideally amberlyst-15 (an ion exchange resin) at 105 °C giving a yield of 72 %. The batch reaction conditions were adopted in a continuous flow synthesis setup, using the Labtrix Start system, in which reaction conditions were optimized. The optimization of glyoxylic acid conversion (92 %) in the Labtrix Start system gave reaction conditions that resulted in low MGH selectivity (25 %) whereas the optimization for MGH selectivity (100 %) gave a conversion a poor glyoxylic acid conversion (15 %). The FlowSyn system fitted with a column reactor gave the best results, in which the optimum conditions were an excess of L-menthol (1.5 M, 6.0 equiv.), temperature (80 °C) and a residence time of 2.5 minutes with a high selectivity (77 %) and average conversion (50 %). The optimized reaction conditions for conversion and selectivity on the different flow systems did not vary significantly and similar trends were observed for the systems. It was shown that an increase in temperature, mole equivalents and residence time led to an increase in MGH conversion in all flow systems. The scale up of the esterification reaction from the Labtrix Start system (19 μL microreactor) to the FlowSyn system fitted with a 2 mL reactor chip, showed that the reaction proceeds with a slight drop in selectivity from 100 % to 92 % while conversion dropped from 15 to 12 %. On the contrary, a significant drop in conversion and selectivity were observed when the FlowSyn column reactor was up-scaled to the Elite-tubular furnace, owing to the poor mixing in the larger channel size reactor.
- Full Text:
- Date Issued: 2017
- Authors: Moyo, McQuillan
- Date: 2017
- Subjects: Chemistry , Pharmaceutical chemistry , Organic compounds -- Synthesis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/12019 , vital:27018
- Description: Herein an alternative approach to the conventional batch synthesis of L-menthyl glyoxylate hydrate (MGH), an important intermediate in the synthesis of drugs of importance is reported, through flow chemistry technology. MGH was initially synthesized in batch and various reaction parameters optimized. It was found to proceed to completion after 6 hours of esterifying glyoxylic acid with excess alcohol (L-menthol) in the presence of a catalyst, ideally amberlyst-15 (an ion exchange resin) at 105 °C giving a yield of 72 %. The batch reaction conditions were adopted in a continuous flow synthesis setup, using the Labtrix Start system, in which reaction conditions were optimized. The optimization of glyoxylic acid conversion (92 %) in the Labtrix Start system gave reaction conditions that resulted in low MGH selectivity (25 %) whereas the optimization for MGH selectivity (100 %) gave a conversion a poor glyoxylic acid conversion (15 %). The FlowSyn system fitted with a column reactor gave the best results, in which the optimum conditions were an excess of L-menthol (1.5 M, 6.0 equiv.), temperature (80 °C) and a residence time of 2.5 minutes with a high selectivity (77 %) and average conversion (50 %). The optimized reaction conditions for conversion and selectivity on the different flow systems did not vary significantly and similar trends were observed for the systems. It was shown that an increase in temperature, mole equivalents and residence time led to an increase in MGH conversion in all flow systems. The scale up of the esterification reaction from the Labtrix Start system (19 μL microreactor) to the FlowSyn system fitted with a 2 mL reactor chip, showed that the reaction proceeds with a slight drop in selectivity from 100 % to 92 % while conversion dropped from 15 to 12 %. On the contrary, a significant drop in conversion and selectivity were observed when the FlowSyn column reactor was up-scaled to the Elite-tubular furnace, owing to the poor mixing in the larger channel size reactor.
- Full Text:
- Date Issued: 2017
New synergic biomaterials for anti-cancer therapy
- Authors: Swanepoel, Bresler
- Date: 2019
- Subjects: Pharmaceutical chemistry , Cancer -- Research , Biomedical materials
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/43957 , vital:37087
- Description: In the last two decades, anti-cancer therapy has grown considerably with the help of both natural and synthetic anti-cancer compounds but, the search for new and improved cancer treatment remains an ongoing and important issue. Some anti-cancer compounds such as cisplatin are limited by their toxicity in normal tissues and the development of drug resistance. Therefore, in order to address drug resistance and side-effects of anti-cancer agents, recent research has been focusing on finding novel combinations of anti-cancer agents that have non-overlapping mechanisms of action. The first objective of this study was to determine the mechanism of action of Anemone nemorosa, Artemisia afra, N-[[3-(4-bromophenyl)-1H-pyrazol-5-yl]-carbamothioyl]-4-chloro-benzamide (BC-7) and N-benzoyl-N’-(3-(4-bromophenyl)-1H-pyrazol-5-yl)-thiourea (BT-7) through cell cycle arrest, phosphatidylserine translocation (PS), caspase activation and mitochondrial membrane depolarization. This study has shown that A. nemorosa, BC-7 and A. afra are capable of inducing cell death within three cancer cell lines namely HeLa, MeWo and HepG2, at varying degrees. HeLa cells were the most susceptible to treatment with A. nemorosa and BC-7 with IC50 values of 20.33 ± 2.480 μg/ml and 65.58 ± 8.400 μM (28.58 ± 3.660 μg/ml), respectively. A. afra was the most active against HepG2 cells with an IC50 value of 37.55 μg/ml. BT-7 was not cytotoxic against any of the cancer cell lines. The effects on HeLa cells and their progression through the cell cycle indicated that cells were arrested in the early M phase for all treatments. The induction of apoptosis was confirmed by an increase in PS translocation and activation of caspase 3 and 8 as well as a decrease in the mitochondrial membrane potential. It was deduced that A. nemorosa, A. afra and BC-7 induce caspase-dependent apoptosis in a mitochondrial dependent manner. The second objective of this study was to investigate the potential of A. nemorosa, A. afra and BC-7 to target various mediators involved in the inflammatory response as an alternative method in which cell death may be induced. Most treatments indicated that a tumour-elicited inflammatory response is indeed induced in HeLa cells and that the significant activation of nuclear factor kappa B (NF-κB) favoured the production of nitric oxide (NO) over cyclo-oxygenase 2 (COX-2). However, treatments with A. nemorosa, BC-7 and A. afra at their IC10 showed the potential of inhibiting this response. ROS levels were increased by most treatments and support the idea of ROS-mediated apoptosis. The third objective was to investigate combination treatments of these extracts and compounds for their potential synergistic cytotoxic activity and thus formulating the combinations as potential anti-cancer agents. Thirty combination mixtures were prepared using the IC50 values of each extract or compound at ratios of 1:3, 1:2, 1:1, 2:1 and 3:1, respectively. The cytotoxic/anti-proliferative activity of each mixture was determined by the bisBenzamide H 33342 trihydrochloride/propidium iodide (Hoechst 33342/PI) dual staining method on HeLa cervical cancer cells. The combination index (CI) values, at inhibition of 50% of HeLa cell growth, for each combination mixture, were determined by means of the Chou and Talalay method. The combined effect can then be indicated as CI < 1, synergism; CI = 1, additive effect or CI > 1, antagonism, respectively. Most combination treatments showed to have an antagonistic effect except for cisplatin:BC-7 (1:3, 1:1, 2:1, 3:1) and cisplatin:A. afra (1:3, 1:2, 1:1, 3:1) combinations that showed synergism. The 1:2 ratio of cisplatin:BC-7 and the 2:1 ratio of cisplatin:A. afra were additive. CI values were also calculated at inhibition of 10, 25 and 75% of HeLa cell growth, for each combination mixture. Antagonistic effects were frequently observed at lower effect levels such as at 10 and 25% inhibition of growth. However, this was not seen for the cisplatin:BC-7 combinations as all the ratios indicated synergism. Some of these ratios, such as the 1:3 and 1:2, even led to a greater degree of synergism being obtained, with noticeable antagonistic effects seen at 50 and 75% inhibition of growth. The current finding is that BC-7 and A. afra could lower the dose of cisplatin in combination to achieve a similar anti-cancer efficacy compared to the higher cisplatin dose when used alone. The lower dosage in combination could result in reduced drug resistance as well as limit the toxicity on normal cells associated with cisplatin treatment. In conclusion, this study shows, for the first time, that A. nemorosa has the potential to induce apoptosis and also has some anti- and pro-inflammatory activity in HeLa cancer cells. This study also enhanced the knowledge of the mechanism of apoptosis induction of BC-7, in a more detailed manner, as well as investigated its inflammatory effects for the first time. Results obtained for A. afra correlated nicely to previously reported studies and confirmed that the methods used in this study, although different, leads to the same conclusions. Combination treatments also indicated, for the first time, that BC-7 and A. afra have the ability to function in a synergic manner with cisplatin and proves that, although extensive research may have been done on a plant or compound, more can be discovered. This new information can lead to identification of new compounds in the plants and the integration of signalling pathways that can be targeted for treatment of cancer.
- Full Text:
- Date Issued: 2019
- Authors: Swanepoel, Bresler
- Date: 2019
- Subjects: Pharmaceutical chemistry , Cancer -- Research , Biomedical materials
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10948/43957 , vital:37087
- Description: In the last two decades, anti-cancer therapy has grown considerably with the help of both natural and synthetic anti-cancer compounds but, the search for new and improved cancer treatment remains an ongoing and important issue. Some anti-cancer compounds such as cisplatin are limited by their toxicity in normal tissues and the development of drug resistance. Therefore, in order to address drug resistance and side-effects of anti-cancer agents, recent research has been focusing on finding novel combinations of anti-cancer agents that have non-overlapping mechanisms of action. The first objective of this study was to determine the mechanism of action of Anemone nemorosa, Artemisia afra, N-[[3-(4-bromophenyl)-1H-pyrazol-5-yl]-carbamothioyl]-4-chloro-benzamide (BC-7) and N-benzoyl-N’-(3-(4-bromophenyl)-1H-pyrazol-5-yl)-thiourea (BT-7) through cell cycle arrest, phosphatidylserine translocation (PS), caspase activation and mitochondrial membrane depolarization. This study has shown that A. nemorosa, BC-7 and A. afra are capable of inducing cell death within three cancer cell lines namely HeLa, MeWo and HepG2, at varying degrees. HeLa cells were the most susceptible to treatment with A. nemorosa and BC-7 with IC50 values of 20.33 ± 2.480 μg/ml and 65.58 ± 8.400 μM (28.58 ± 3.660 μg/ml), respectively. A. afra was the most active against HepG2 cells with an IC50 value of 37.55 μg/ml. BT-7 was not cytotoxic against any of the cancer cell lines. The effects on HeLa cells and their progression through the cell cycle indicated that cells were arrested in the early M phase for all treatments. The induction of apoptosis was confirmed by an increase in PS translocation and activation of caspase 3 and 8 as well as a decrease in the mitochondrial membrane potential. It was deduced that A. nemorosa, A. afra and BC-7 induce caspase-dependent apoptosis in a mitochondrial dependent manner. The second objective of this study was to investigate the potential of A. nemorosa, A. afra and BC-7 to target various mediators involved in the inflammatory response as an alternative method in which cell death may be induced. Most treatments indicated that a tumour-elicited inflammatory response is indeed induced in HeLa cells and that the significant activation of nuclear factor kappa B (NF-κB) favoured the production of nitric oxide (NO) over cyclo-oxygenase 2 (COX-2). However, treatments with A. nemorosa, BC-7 and A. afra at their IC10 showed the potential of inhibiting this response. ROS levels were increased by most treatments and support the idea of ROS-mediated apoptosis. The third objective was to investigate combination treatments of these extracts and compounds for their potential synergistic cytotoxic activity and thus formulating the combinations as potential anti-cancer agents. Thirty combination mixtures were prepared using the IC50 values of each extract or compound at ratios of 1:3, 1:2, 1:1, 2:1 and 3:1, respectively. The cytotoxic/anti-proliferative activity of each mixture was determined by the bisBenzamide H 33342 trihydrochloride/propidium iodide (Hoechst 33342/PI) dual staining method on HeLa cervical cancer cells. The combination index (CI) values, at inhibition of 50% of HeLa cell growth, for each combination mixture, were determined by means of the Chou and Talalay method. The combined effect can then be indicated as CI < 1, synergism; CI = 1, additive effect or CI > 1, antagonism, respectively. Most combination treatments showed to have an antagonistic effect except for cisplatin:BC-7 (1:3, 1:1, 2:1, 3:1) and cisplatin:A. afra (1:3, 1:2, 1:1, 3:1) combinations that showed synergism. The 1:2 ratio of cisplatin:BC-7 and the 2:1 ratio of cisplatin:A. afra were additive. CI values were also calculated at inhibition of 10, 25 and 75% of HeLa cell growth, for each combination mixture. Antagonistic effects were frequently observed at lower effect levels such as at 10 and 25% inhibition of growth. However, this was not seen for the cisplatin:BC-7 combinations as all the ratios indicated synergism. Some of these ratios, such as the 1:3 and 1:2, even led to a greater degree of synergism being obtained, with noticeable antagonistic effects seen at 50 and 75% inhibition of growth. The current finding is that BC-7 and A. afra could lower the dose of cisplatin in combination to achieve a similar anti-cancer efficacy compared to the higher cisplatin dose when used alone. The lower dosage in combination could result in reduced drug resistance as well as limit the toxicity on normal cells associated with cisplatin treatment. In conclusion, this study shows, for the first time, that A. nemorosa has the potential to induce apoptosis and also has some anti- and pro-inflammatory activity in HeLa cancer cells. This study also enhanced the knowledge of the mechanism of apoptosis induction of BC-7, in a more detailed manner, as well as investigated its inflammatory effects for the first time. Results obtained for A. afra correlated nicely to previously reported studies and confirmed that the methods used in this study, although different, leads to the same conclusions. Combination treatments also indicated, for the first time, that BC-7 and A. afra have the ability to function in a synergic manner with cisplatin and proves that, although extensive research may have been done on a plant or compound, more can be discovered. This new information can lead to identification of new compounds in the plants and the integration of signalling pathways that can be targeted for treatment of cancer.
- Full Text:
- Date Issued: 2019
- «
- ‹
- 1
- ›
- »