Photophysicochemical properties and in vitro photodynamic therapy activities of zinc phthalocyanine conjugates with biomolecules and single-walled carbon nanotubes
- Authors: Ogbodu, Racheal O
- Date: 2015
- Subjects: Photochemotherapy , Phthalocyanines , Biomolecules
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4544 , http://hdl.handle.net/10962/d1017924
- Description: The synthesis, photophysicochemcial properties, in vitro dark toxicity and photodynamic therapy (PDT) activities of different derivatives of zinc phthalocyanine (ZnPc) conjugates with biomolecules (folic acid, bovine serum albumin (BSA), ascorbic acid, uridine or spermine) and single-walled carbon nanotubes (SWCNTs) are presented in this work. The fluorescence quantum yields (ΦF) (Subscript F) of the ZnPc derivatives or ZnPc-biomolecule conjugates remained relatively the same as compared to the precursor Pcs. Slight increases were observed in the ΦF (Subscript F) values of conjugates containing substituents such as pyrene, folic acid or BSA with intrinsic fluorescence properties. The triplet quantum yield (ΦT ) (Subscript T) values for some ZnPc conjugates increases compared to the precursor ZnPcs due to extended π conjugation (for the conjugate with pyrene) and the presence of phenyl ring that support spin-orbit charge transfer intersystem crossing to triplet state. While some conjugates showed decreases in the ΦT (Subscript T) values compared to precursor ZnPcs due to the presence of substituents that could quench photo-excited state properties. The singlet oxygen quantum yield (ΦΔ ) values follow the trends of the triplet quantum yield values. The conjugates containing BSA also show increases in the ΦΔ values without corresponding increases in ΦT (Subscript T) values due to the ability of BSA to generate free radicals including singlet oxygen. The presence of SWCNTs decreases the photophysicochemcial properties of some ZnPc-SWCNT conjugates compared to the precursor ZnPcs due to photo-induced electron transfer from an excited Pc complex (electron donor) to SWCNTs (electron acceptor). However, increases were observed in some ZnPc-SWCNT conjugates as a result of fast charge recombination process due to highly short-lived radical ion pair produced. These phenomena affected the ΦF (Suscript F) values, ΦT (Suscript T) values, and the ΦΔ values. Increases or decreases in ΦT (Suscript T) values resulted in corresponding increases or decreases in ΦΔ values
- Full Text:
- Date Issued: 2015
- Authors: Ogbodu, Racheal O
- Date: 2015
- Subjects: Photochemotherapy , Phthalocyanines , Biomolecules
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4544 , http://hdl.handle.net/10962/d1017924
- Description: The synthesis, photophysicochemcial properties, in vitro dark toxicity and photodynamic therapy (PDT) activities of different derivatives of zinc phthalocyanine (ZnPc) conjugates with biomolecules (folic acid, bovine serum albumin (BSA), ascorbic acid, uridine or spermine) and single-walled carbon nanotubes (SWCNTs) are presented in this work. The fluorescence quantum yields (ΦF) (Subscript F) of the ZnPc derivatives or ZnPc-biomolecule conjugates remained relatively the same as compared to the precursor Pcs. Slight increases were observed in the ΦF (Subscript F) values of conjugates containing substituents such as pyrene, folic acid or BSA with intrinsic fluorescence properties. The triplet quantum yield (ΦT ) (Subscript T) values for some ZnPc conjugates increases compared to the precursor ZnPcs due to extended π conjugation (for the conjugate with pyrene) and the presence of phenyl ring that support spin-orbit charge transfer intersystem crossing to triplet state. While some conjugates showed decreases in the ΦT (Subscript T) values compared to precursor ZnPcs due to the presence of substituents that could quench photo-excited state properties. The singlet oxygen quantum yield (ΦΔ ) values follow the trends of the triplet quantum yield values. The conjugates containing BSA also show increases in the ΦΔ values without corresponding increases in ΦT (Subscript T) values due to the ability of BSA to generate free radicals including singlet oxygen. The presence of SWCNTs decreases the photophysicochemcial properties of some ZnPc-SWCNT conjugates compared to the precursor ZnPcs due to photo-induced electron transfer from an excited Pc complex (electron donor) to SWCNTs (electron acceptor). However, increases were observed in some ZnPc-SWCNT conjugates as a result of fast charge recombination process due to highly short-lived radical ion pair produced. These phenomena affected the ΦF (Suscript F) values, ΦT (Suscript T) values, and the ΦΔ values. Increases or decreases in ΦT (Suscript T) values resulted in corresponding increases or decreases in ΦΔ values
- Full Text:
- Date Issued: 2015
Ultra-high precision machining of contact lens polymers
- Authors: Olufayo, Oluwole Ayodeji
- Date: 2015
- Subjects: Contact lenses , Polymers
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/3001 , vital:20385
- Description: Contact lens manufacture requires a high level of accuracy and surface integrity in the range of a few nanometres. Amidst numerous optical manufacturing techniques, single-point diamond turning is widely employed in the making of contact lenses due to its capability of producing optical surfaces of complex shapes and nanometric accuracy. For process optimisation, it is ideal to assess the effects of various conditions and also establish their relationships with the surface finish. Presently, there is little information available on the performance of single point diamond turning when machining contact lens polymers. Therefore, the research work undertaken herewith is aimed at testing known facts in contact lens diamond turning and investigating the performance of ultra-high precision manufacturing of contact lens polymers. Experimental tests were conducted on Roflufocon E, which is a commercially available contact lens polymer and on Precitech Nanoform Ultra-grind 250 precision machining. Tests were performed at varying cutting feeds, speed and depth of cut. Initial experimental tests investigated the influence of process factors affecting surface finish in the UHPM of lenses. The acquired data were statistically analysed using Response Surface Method (RSM) to create a model of the process. Subsequently, a model which uses Runge-Kutta’s fourth order non-linear finite series scheme was developed and adapted to deduce the force occurring at the tool tip. These forces were also statistically analysed and modelled to also predict the effects process factors have on cutting force. Further experimental tests were aimed at establishing the presence of the triboelectric wear phenomena occurring during polymer machining and identifying the most influential process factors. Results indicate that feed rate is a significant factor in the generation of high optical surface quality. In addition, the depth of cut was identified as a significant factor in the generation of low surface roughness in lenses. The influence some of these process factors had was notably linked to triboelectric effects. This tribological effect was generated from the continuous rubbing action of magnetised chips on the cutting tool. This further stresses the presence of high static charging during cutting. Moderately humid cutting conditions presented an adequate means for static charge control and displayed improved surface finishes. In all experimental tests, the feed rate was identified as the most significant factor within the range of cutting parameters employed. Hence, the results validated the fact that feed rate had a high influence in polymer machining. The work also established the relationship on how surface roughness of an optical lens responded to monitoring signals and parameters such as force, feed, speed and depth of cut during machining and it generated models for prediction of surface finishes and appropriate selection of parameters. Furthermore, the study provides a molecular simulation analysis for validating observed conditions occurring at the nanometric scale in polymer machining. This is novel in molecular polymer modelling. The outcome of this research has contributed significantly to the body of knowledge and has provided basic information in the area of precision manufacturing of optical components of high surface integrity such as contact lenses. The application of the research findings presented here cuts across various fields such as medicine, semi-conductors, aerospace, defence, telecom, lasers, instrumentation and life sciences.
- Full Text:
- Date Issued: 2015
- Authors: Olufayo, Oluwole Ayodeji
- Date: 2015
- Subjects: Contact lenses , Polymers
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/3001 , vital:20385
- Description: Contact lens manufacture requires a high level of accuracy and surface integrity in the range of a few nanometres. Amidst numerous optical manufacturing techniques, single-point diamond turning is widely employed in the making of contact lenses due to its capability of producing optical surfaces of complex shapes and nanometric accuracy. For process optimisation, it is ideal to assess the effects of various conditions and also establish their relationships with the surface finish. Presently, there is little information available on the performance of single point diamond turning when machining contact lens polymers. Therefore, the research work undertaken herewith is aimed at testing known facts in contact lens diamond turning and investigating the performance of ultra-high precision manufacturing of contact lens polymers. Experimental tests were conducted on Roflufocon E, which is a commercially available contact lens polymer and on Precitech Nanoform Ultra-grind 250 precision machining. Tests were performed at varying cutting feeds, speed and depth of cut. Initial experimental tests investigated the influence of process factors affecting surface finish in the UHPM of lenses. The acquired data were statistically analysed using Response Surface Method (RSM) to create a model of the process. Subsequently, a model which uses Runge-Kutta’s fourth order non-linear finite series scheme was developed and adapted to deduce the force occurring at the tool tip. These forces were also statistically analysed and modelled to also predict the effects process factors have on cutting force. Further experimental tests were aimed at establishing the presence of the triboelectric wear phenomena occurring during polymer machining and identifying the most influential process factors. Results indicate that feed rate is a significant factor in the generation of high optical surface quality. In addition, the depth of cut was identified as a significant factor in the generation of low surface roughness in lenses. The influence some of these process factors had was notably linked to triboelectric effects. This tribological effect was generated from the continuous rubbing action of magnetised chips on the cutting tool. This further stresses the presence of high static charging during cutting. Moderately humid cutting conditions presented an adequate means for static charge control and displayed improved surface finishes. In all experimental tests, the feed rate was identified as the most significant factor within the range of cutting parameters employed. Hence, the results validated the fact that feed rate had a high influence in polymer machining. The work also established the relationship on how surface roughness of an optical lens responded to monitoring signals and parameters such as force, feed, speed and depth of cut during machining and it generated models for prediction of surface finishes and appropriate selection of parameters. Furthermore, the study provides a molecular simulation analysis for validating observed conditions occurring at the nanometric scale in polymer machining. This is novel in molecular polymer modelling. The outcome of this research has contributed significantly to the body of knowledge and has provided basic information in the area of precision manufacturing of optical components of high surface integrity such as contact lenses. The application of the research findings presented here cuts across various fields such as medicine, semi-conductors, aerospace, defence, telecom, lasers, instrumentation and life sciences.
- Full Text:
- Date Issued: 2015
Evaluation of the quality indices of the final effluents of two wastewater treatment plants in buffalo City Metropolitan Municipality in the Eastern Cape Province
- Authors: Osuolale, Olayinka O
- Date: 2015
- Language: English
- Type: Thesis , Doctoral , PhD (Microbiology)
- Identifier: vital:11292 , http://hdl.handle.net/10353/d1021079
- Description: Waste waters can be sources of pollution to surface water and the environment with severe implications for public health. Most treatment plants in the Buffalo City Municipality in the Eastern Cape Province discharge their treated effluent into the surface waters which directly and indirectly impacts on the quality of surface waters in the region. The objective of this study was to determine the microbiological and physicochemical qualities of the final effluents of two wastewater treatment plants in the Buffalo City Municipality in the Eastern Cape Province of South Africa over a period of 12 months (September 2012 to August 2013). The qualities of the final effluents of WW-Ama Wastewater Treatment Plant with respect to phosphate (3.9 mg/l - 20.6 mg/l), free chlorine (0.05 mg/l - 0.71 mg/l), chemical oxygen demand (COD) (4.7 mg/l - 211 mg/l), and faecal coliform (0 - 2.92 × 104 CFU/100 ml) were not in compliance with the permissible limits set for effluent discharged to surface water by South Africa guidelines for effluent discharge. Other physicochemical parameters like biological oxygen demand (BOD) (2.2 mg/l - 9.0 mg/l), total dissolve solid (TDS) (253 mg/l - 336.3 mg/l) and turbidity (4.8 NTU - 43.20 NTU) with no SA regulatory set limits were compared to other regulatory standards and they do not comply with the limits. Also, at the second WWTP’s, the WW-Dim Treatment Plant effluent quality for free chlorine (0.06 mg/l - 7.2 mg/l), BOD (0.1 mg/l - 7.4 mg/l), and turbidity (4.02 NTU - 24.3 NTU) also did not comply. For microbiological qualities, counts of presumptive E. coli and Vibrio ranged between 0 - 2.92 × PROFESSOR ANTHONY I. OKOHAntibiogram of the bacterial isolates were determined using the disk diffusion method. A total of 107 confirmed E. coli and 100 confirmed Vibrio spp. were used for this assay. Results of antibiotic sensitivity test revealed that 63.6% of the E. coli isolates were resistance to ampicillin while 49.5% were resistant to tetracycline and cephalothin. The least resistances were observed against gentamicin (3.7%) and cefotaxime (1.9%). No resistance was observed against meropenem. For the Vibrio spp, resistance was most frequently observed against tetracycline (38%) ampicillin (26%), chloramphenicol (16%), cefotaxime (14%), trimethoprim-sulfamethoxazole (13%) and the least resistance observed was against ciprofloxacin (1%). This study demonstrates that poorly treated wastewater effluent can be a source of eutrophic water with high nutrient levels and pathogenic bacteria and enteric viruses as well as antibiotic resistance determinants that could impact negatively on human health. The finding of this study also suggests that WWTPs have to be properly monitored and controlled to ensure compliance to set guidelines. This could be attained through the application of appropriate treatment processes, which will help to minimize possible dangers to public environment health.
- Full Text:
- Date Issued: 2015
- Authors: Osuolale, Olayinka O
- Date: 2015
- Language: English
- Type: Thesis , Doctoral , PhD (Microbiology)
- Identifier: vital:11292 , http://hdl.handle.net/10353/d1021079
- Description: Waste waters can be sources of pollution to surface water and the environment with severe implications for public health. Most treatment plants in the Buffalo City Municipality in the Eastern Cape Province discharge their treated effluent into the surface waters which directly and indirectly impacts on the quality of surface waters in the region. The objective of this study was to determine the microbiological and physicochemical qualities of the final effluents of two wastewater treatment plants in the Buffalo City Municipality in the Eastern Cape Province of South Africa over a period of 12 months (September 2012 to August 2013). The qualities of the final effluents of WW-Ama Wastewater Treatment Plant with respect to phosphate (3.9 mg/l - 20.6 mg/l), free chlorine (0.05 mg/l - 0.71 mg/l), chemical oxygen demand (COD) (4.7 mg/l - 211 mg/l), and faecal coliform (0 - 2.92 × 104 CFU/100 ml) were not in compliance with the permissible limits set for effluent discharged to surface water by South Africa guidelines for effluent discharge. Other physicochemical parameters like biological oxygen demand (BOD) (2.2 mg/l - 9.0 mg/l), total dissolve solid (TDS) (253 mg/l - 336.3 mg/l) and turbidity (4.8 NTU - 43.20 NTU) with no SA regulatory set limits were compared to other regulatory standards and they do not comply with the limits. Also, at the second WWTP’s, the WW-Dim Treatment Plant effluent quality for free chlorine (0.06 mg/l - 7.2 mg/l), BOD (0.1 mg/l - 7.4 mg/l), and turbidity (4.02 NTU - 24.3 NTU) also did not comply. For microbiological qualities, counts of presumptive E. coli and Vibrio ranged between 0 - 2.92 × PROFESSOR ANTHONY I. OKOHAntibiogram of the bacterial isolates were determined using the disk diffusion method. A total of 107 confirmed E. coli and 100 confirmed Vibrio spp. were used for this assay. Results of antibiotic sensitivity test revealed that 63.6% of the E. coli isolates were resistance to ampicillin while 49.5% were resistant to tetracycline and cephalothin. The least resistances were observed against gentamicin (3.7%) and cefotaxime (1.9%). No resistance was observed against meropenem. For the Vibrio spp, resistance was most frequently observed against tetracycline (38%) ampicillin (26%), chloramphenicol (16%), cefotaxime (14%), trimethoprim-sulfamethoxazole (13%) and the least resistance observed was against ciprofloxacin (1%). This study demonstrates that poorly treated wastewater effluent can be a source of eutrophic water with high nutrient levels and pathogenic bacteria and enteric viruses as well as antibiotic resistance determinants that could impact negatively on human health. The finding of this study also suggests that WWTPs have to be properly monitored and controlled to ensure compliance to set guidelines. This could be attained through the application of appropriate treatment processes, which will help to minimize possible dangers to public environment health.
- Full Text:
- Date Issued: 2015
Network simulation for professional audio networks
- Authors: Otten, Fred
- Date: 2015
- Subjects: Sound engineers , Ethernet (Local area network system) , Computer networks , Computer simulation
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4713 , http://hdl.handle.net/10962/d1017935
- Description: Audio Engineers are required to design and deploy large multi-channel sound systems which meet a set of requirements and use networking technologies such as Firewire and Ethernet AVB. Bandwidth utilisation and parameter groupings are among the factors which need to be considered in these designs. An implementation of an extensible, generic simulation framework would allow audio engineers to easily compare protocols and networking technologies and get near real time responses with regards to bandwidth utilisation. Our hypothesis is that an application-level capability can be developed which uses a network simulation framework to enable this process and enhances the audio engineer’s experience of designing and configuring a network. This thesis presents a new, extensible simulation framework which can be utilised to simulate professional audio networks. This framework is utilised to develop an application - AudioNetSim - based on the requirements of an audio engineer. The thesis describes the AudioNetSim models and implementations for Ethernet AVB, Firewire and the AES- 64 control protocol. AudioNetSim enables bandwidth usage determination for any network configuration and connection scenario and is used to compare Firewire and Ethernet AVB bandwidth utilisation. It also applies graph theory to the circular join problem and provides a solution to detect circular joins.
- Full Text:
- Date Issued: 2015
- Authors: Otten, Fred
- Date: 2015
- Subjects: Sound engineers , Ethernet (Local area network system) , Computer networks , Computer simulation
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4713 , http://hdl.handle.net/10962/d1017935
- Description: Audio Engineers are required to design and deploy large multi-channel sound systems which meet a set of requirements and use networking technologies such as Firewire and Ethernet AVB. Bandwidth utilisation and parameter groupings are among the factors which need to be considered in these designs. An implementation of an extensible, generic simulation framework would allow audio engineers to easily compare protocols and networking technologies and get near real time responses with regards to bandwidth utilisation. Our hypothesis is that an application-level capability can be developed which uses a network simulation framework to enable this process and enhances the audio engineer’s experience of designing and configuring a network. This thesis presents a new, extensible simulation framework which can be utilised to simulate professional audio networks. This framework is utilised to develop an application - AudioNetSim - based on the requirements of an audio engineer. The thesis describes the AudioNetSim models and implementations for Ethernet AVB, Firewire and the AES- 64 control protocol. AudioNetSim enables bandwidth usage determination for any network configuration and connection scenario and is used to compare Firewire and Ethernet AVB bandwidth utilisation. It also applies graph theory to the circular join problem and provides a solution to detect circular joins.
- Full Text:
- Date Issued: 2015
An enabling environment for independent power producers in renewable electricity
- Authors: Palmer, Vivian Julian
- Date: 2015
- Subjects: Renewable energy sources -- South Africa , Independent power producers -- South Africa
- Language: English
- Type: Thesis , Doctoral , DBA
- Identifier: http://hdl.handle.net/10948/5868 , vital:21007
- Description: The increasing demand for electricity, the rising price of energy from conventional sources and limited electricity supply are a global concern. The demand on electricity generation could be alleviated by diversifying the sources from which electricity is obtained to achieve the goals of long-term electricity supply. Diversification implies finding alternative sources of energy such as renewable energy for the production of electricity. The South African electricity system is under increased pressure to provide and maintain electricity supply to its users. Electricity production may be regarded as a key contributor to the social and economic development of South Africa. The challenges are so serious that it will gradually become increasingly difficult to extract sufficient resources to satisfy increasing electricity demand. Growth in the electricity and industrial sectors signifies profound changes in the entire energy industry. The South African power utility Eskom, supplies 94% of South Africa’s electricity but the risk of inadequate supply because of increasing electricity demand is mitigated through the employment of Independent Power Producers (IPPs) which supply to the grid. However, although a limited number of IPP entrepreneurs sell electricity to the Eskom grid, there is no enabling entrepreneurial environment in which they can thrive. There is no positive movement to inaugurate policies and processes. This has created an opportunity for Smart Grid access as a viable option to accommodate IPP entrepreneurs into the grid. Investing in renewable electricity sources may provide feasible alternatives for the electricity industry, it would alleviate pressure on current supply whilst creating an enabling entrepreneurial environment for IPP entrepreneurs and increase entrepreneurial activity. This study investigates a proposed model for an enabling entrepreneurial environment for IPPs in the RE sector that can be utilised to ensure increased entrepreneurial activity within the electricity industry. Establishing such an enabling environment would contribute positively to the alleviation of the electricity demand crisis, result in lower carbon emissions and create a sustainable, more diverse electricity generation mix. This proposed IPP industry model for an enabling entrepreneurial environment is presented to address the problems experienced at the different levels of the electricity industry. The model can be utilised to increase entrepreneurial activity while eradicating major electricity challenges at different levels in the South African electricity industry. The results indicate that that RE, in the form of solar and wind, has the potential to expand the South African electricity industry significantly. Therefore, in order to reform the South African electricity industry, stakeholders need to embrace entrepreneurship as IPP entrepreneurs. This can be done effectively by the incorporation of IPP entrepreneurs into the electricity network. However, an enabling entrepreneurial environment in which to operate must be ensured. In this study, five important variables support the establishment of an enabling entrepreneurial environment for IPP entrepreneurs. These have been identified as; Smart Grids, Entrepreneurship, Renewable electricity environment, SA policy and Stakeholder theory. An important contribution has been made towards Stakeholder Theory. This has proven to be instrumental within the RE sector of the electricity industry in South Africa, as the mentioned role players have a reciprocal role to play. Three surveys were conducted at three levels of the electricity industry, namely, at organisational, legislative and entrepreneurial levels and included Eskom Management, National Energy Regulator (NERSA) Management and Approved and Non-approved IPPs. Both qualitative and quantitative research methods were utilised in this research study. The results indicate that SA Policy is instrumental in assisting stakeholders to facilitate the IPP process and feed the power from RE generation into the network. Most respondents were positive about the role of Smart Grids in future electricity generation and their contribution towards creating an enabling entrepreneurial environment for IPP entrepreneurs. Respondents indicated that by policy decisions, greater emphasis can be placed on the results of climate change and environmental challenges. Emphasis on the incorporation of stakeholders proved imperative to this group (IPPs). The results indicated that stakeholder management is a key factor contributing to the establishment of an enabling entrepreneurial environment. The major contribution of this study is a proposed entrepreneurial model that can improve future sustainability of the electricity supply.
- Full Text:
- Date Issued: 2015
- Authors: Palmer, Vivian Julian
- Date: 2015
- Subjects: Renewable energy sources -- South Africa , Independent power producers -- South Africa
- Language: English
- Type: Thesis , Doctoral , DBA
- Identifier: http://hdl.handle.net/10948/5868 , vital:21007
- Description: The increasing demand for electricity, the rising price of energy from conventional sources and limited electricity supply are a global concern. The demand on electricity generation could be alleviated by diversifying the sources from which electricity is obtained to achieve the goals of long-term electricity supply. Diversification implies finding alternative sources of energy such as renewable energy for the production of electricity. The South African electricity system is under increased pressure to provide and maintain electricity supply to its users. Electricity production may be regarded as a key contributor to the social and economic development of South Africa. The challenges are so serious that it will gradually become increasingly difficult to extract sufficient resources to satisfy increasing electricity demand. Growth in the electricity and industrial sectors signifies profound changes in the entire energy industry. The South African power utility Eskom, supplies 94% of South Africa’s electricity but the risk of inadequate supply because of increasing electricity demand is mitigated through the employment of Independent Power Producers (IPPs) which supply to the grid. However, although a limited number of IPP entrepreneurs sell electricity to the Eskom grid, there is no enabling entrepreneurial environment in which they can thrive. There is no positive movement to inaugurate policies and processes. This has created an opportunity for Smart Grid access as a viable option to accommodate IPP entrepreneurs into the grid. Investing in renewable electricity sources may provide feasible alternatives for the electricity industry, it would alleviate pressure on current supply whilst creating an enabling entrepreneurial environment for IPP entrepreneurs and increase entrepreneurial activity. This study investigates a proposed model for an enabling entrepreneurial environment for IPPs in the RE sector that can be utilised to ensure increased entrepreneurial activity within the electricity industry. Establishing such an enabling environment would contribute positively to the alleviation of the electricity demand crisis, result in lower carbon emissions and create a sustainable, more diverse electricity generation mix. This proposed IPP industry model for an enabling entrepreneurial environment is presented to address the problems experienced at the different levels of the electricity industry. The model can be utilised to increase entrepreneurial activity while eradicating major electricity challenges at different levels in the South African electricity industry. The results indicate that that RE, in the form of solar and wind, has the potential to expand the South African electricity industry significantly. Therefore, in order to reform the South African electricity industry, stakeholders need to embrace entrepreneurship as IPP entrepreneurs. This can be done effectively by the incorporation of IPP entrepreneurs into the electricity network. However, an enabling entrepreneurial environment in which to operate must be ensured. In this study, five important variables support the establishment of an enabling entrepreneurial environment for IPP entrepreneurs. These have been identified as; Smart Grids, Entrepreneurship, Renewable electricity environment, SA policy and Stakeholder theory. An important contribution has been made towards Stakeholder Theory. This has proven to be instrumental within the RE sector of the electricity industry in South Africa, as the mentioned role players have a reciprocal role to play. Three surveys were conducted at three levels of the electricity industry, namely, at organisational, legislative and entrepreneurial levels and included Eskom Management, National Energy Regulator (NERSA) Management and Approved and Non-approved IPPs. Both qualitative and quantitative research methods were utilised in this research study. The results indicate that SA Policy is instrumental in assisting stakeholders to facilitate the IPP process and feed the power from RE generation into the network. Most respondents were positive about the role of Smart Grids in future electricity generation and their contribution towards creating an enabling entrepreneurial environment for IPP entrepreneurs. Respondents indicated that by policy decisions, greater emphasis can be placed on the results of climate change and environmental challenges. Emphasis on the incorporation of stakeholders proved imperative to this group (IPPs). The results indicated that stakeholder management is a key factor contributing to the establishment of an enabling entrepreneurial environment. The major contribution of this study is a proposed entrepreneurial model that can improve future sustainability of the electricity supply.
- Full Text:
- Date Issued: 2015
Control and vulnerability : reflections on the nature of human agency and personhood
- Authors: Paphitis, Sharli Anne
- Date: 2015
- Subjects: Self-control , Vulnerability (Personality trait) , Self (Philosophy) , Social psychology , Cognitive science , Frankfurt, Harry G., 1929- -- Criticism and interpretation , Watson, Gary, 1943- -- Criticism and interpretation , Mele, Alfred R., 1951- -- Criticism and interpretation , Nietzsche, Friedrich Wilhelm, 1844-1900 -- Criticism and interpretation
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:2750 , http://hdl.handle.net/10962/d1018671
- Description: Following the writings of philosophers such as Harry Frankfurt, Gary Watson, and Alfred Mele, in this thesis I defend some central claims of the self-control view of human agency. However, I not only defend, but also supplement this view in the following two ways. First, drawing on work by Mary Midgley and Sigmund Freud I advance the claim that self-control requires the experience of internal conflict between an agent’s motivations and intentions. Second, drawing on insights from Simone de Beauvoir and Friedrich Nietzsche, as well as recent research in social psychology and cognitive science, I will argue in this thesis that self-control and vulnerability are inextricably intertwined with one another, and that as a result both are to be seen as constitutive of human agency. While it is the capacity for self-control that marks us out as human agents, I argue that it is also our uniquely human vulnerability which distinguishes our agency from the kind of agency which we might attribute to other potential or actual forms of sentience. Further, while the concepts of human agency and personhood are typically conflated in the analytic tradition of philosophy, in this thesis I will show that there are good reasons for understanding these two concepts as subtly distinct from one another. The term personhood, I will argue, can fruitfully be understood in substantive rather than purely formal terms. A person, in the superlative sense, is to be understood as someone who exercises their agency well; and, as such, persons are answerable to a number of normative prescriptions. Following Midgley, Nietzsche and Martha Nussbaum, I argue against Frankfurt’s normative prescription for personhood in the form of what he calls ‘wholeheartedness’, and offer four normative prescriptions for personhood of my own.
- Full Text:
- Date Issued: 2015
- Authors: Paphitis, Sharli Anne
- Date: 2015
- Subjects: Self-control , Vulnerability (Personality trait) , Self (Philosophy) , Social psychology , Cognitive science , Frankfurt, Harry G., 1929- -- Criticism and interpretation , Watson, Gary, 1943- -- Criticism and interpretation , Mele, Alfred R., 1951- -- Criticism and interpretation , Nietzsche, Friedrich Wilhelm, 1844-1900 -- Criticism and interpretation
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:2750 , http://hdl.handle.net/10962/d1018671
- Description: Following the writings of philosophers such as Harry Frankfurt, Gary Watson, and Alfred Mele, in this thesis I defend some central claims of the self-control view of human agency. However, I not only defend, but also supplement this view in the following two ways. First, drawing on work by Mary Midgley and Sigmund Freud I advance the claim that self-control requires the experience of internal conflict between an agent’s motivations and intentions. Second, drawing on insights from Simone de Beauvoir and Friedrich Nietzsche, as well as recent research in social psychology and cognitive science, I will argue in this thesis that self-control and vulnerability are inextricably intertwined with one another, and that as a result both are to be seen as constitutive of human agency. While it is the capacity for self-control that marks us out as human agents, I argue that it is also our uniquely human vulnerability which distinguishes our agency from the kind of agency which we might attribute to other potential or actual forms of sentience. Further, while the concepts of human agency and personhood are typically conflated in the analytic tradition of philosophy, in this thesis I will show that there are good reasons for understanding these two concepts as subtly distinct from one another. The term personhood, I will argue, can fruitfully be understood in substantive rather than purely formal terms. A person, in the superlative sense, is to be understood as someone who exercises their agency well; and, as such, persons are answerable to a number of normative prescriptions. Following Midgley, Nietzsche and Martha Nussbaum, I argue against Frankfurt’s normative prescription for personhood in the form of what he calls ‘wholeheartedness’, and offer four normative prescriptions for personhood of my own.
- Full Text:
- Date Issued: 2015
Primary maths teacher learning and identity within a numeracy in-service community of practice
- Authors: Pausigere, Peter
- Date: 2015
- Subjects: Mathematics -- Study and teaching (Elementary) -- South Africa , Teachers -- In-service training -- South Africa , Student-centered learning -- South Africa , Communities of practice -- South Africa , Educational change -- South Africa
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:2019 , http://hdl.handle.net/10962/d1017183
- Description: This study focuses on the processes of primary maths teacher learning and how their identities and practices evolve in relation to participation in a primary maths focused in-service teacher education programme, called the Numeracy Inquiry Community of Leader Educators (NICLE).Additionally it investigates activities, relations and forms of participation within the Community of Practice (CoP) which enable or constrain evolving primary maths identities and practices and how these relate to the broader context. The study draws from the situative-participationists (Lave, 1996; Wenger, 1998; Sfard & Prusak, 2005; Wenger et al, 2002) theoretical framework supplemented by Bernstein’s (2000) pedagogic identity model. Using a qualitative educational interpretive approach I sampled 8 primary teachers drawn from NICLE and gathered data through participant observations, interactive interviews, document analysis and reflective journals. Analysing the key data themes that emerged from teacher learning stories, which I have called stelos, the study explains the nature of the primary maths teachers’ learning, transformation and participation experiences in NICLE using the synonyms reinvigoration and remediation and activation and relating these semantics to the teachers’ mathematical identities and histories. The study also explains the processes through which primary maths teacher identities evolve in relation to participation in an in-service CoP as ‘insiding’ and ‘outcropping’. Interpreting qualitative data from the empirical field indicates that teachers participating in NICLE mostly took-up into their maths classrooms key numeracy-domain concepts, resources and issues presented by primary maths experts which are informed by research and theory that link to practices. Teachers collaboratively and actively engaged in a range of activities that relate to classroom practices. Teacher learning was also enabled when teachers engaged in maths overlapping communities of practice, shared classroom experiences in friendly ways with fellow NICLE teachers and engaged with NICLE presenters who mutually respected and regarded them as professionals. Such affordances were said to enable teachers to engage learners in maths classes and improve their understanding of specific primary maths concepts. On the other hand teachers felt challenged by the travelling distance, limited time and also raised the tension of how to scale-up maths professional development initiatives to include schools from their community. The study makes a theoretical contribution by illustrating how Bernstein’s pedagogic identity model and its elaboration by Tyler (1999) provides analytical tools to interrogate macro educational changes and connect these to the micro processes and teacher identities.
- Full Text:
- Date Issued: 2015
- Authors: Pausigere, Peter
- Date: 2015
- Subjects: Mathematics -- Study and teaching (Elementary) -- South Africa , Teachers -- In-service training -- South Africa , Student-centered learning -- South Africa , Communities of practice -- South Africa , Educational change -- South Africa
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:2019 , http://hdl.handle.net/10962/d1017183
- Description: This study focuses on the processes of primary maths teacher learning and how their identities and practices evolve in relation to participation in a primary maths focused in-service teacher education programme, called the Numeracy Inquiry Community of Leader Educators (NICLE).Additionally it investigates activities, relations and forms of participation within the Community of Practice (CoP) which enable or constrain evolving primary maths identities and practices and how these relate to the broader context. The study draws from the situative-participationists (Lave, 1996; Wenger, 1998; Sfard & Prusak, 2005; Wenger et al, 2002) theoretical framework supplemented by Bernstein’s (2000) pedagogic identity model. Using a qualitative educational interpretive approach I sampled 8 primary teachers drawn from NICLE and gathered data through participant observations, interactive interviews, document analysis and reflective journals. Analysing the key data themes that emerged from teacher learning stories, which I have called stelos, the study explains the nature of the primary maths teachers’ learning, transformation and participation experiences in NICLE using the synonyms reinvigoration and remediation and activation and relating these semantics to the teachers’ mathematical identities and histories. The study also explains the processes through which primary maths teacher identities evolve in relation to participation in an in-service CoP as ‘insiding’ and ‘outcropping’. Interpreting qualitative data from the empirical field indicates that teachers participating in NICLE mostly took-up into their maths classrooms key numeracy-domain concepts, resources and issues presented by primary maths experts which are informed by research and theory that link to practices. Teachers collaboratively and actively engaged in a range of activities that relate to classroom practices. Teacher learning was also enabled when teachers engaged in maths overlapping communities of practice, shared classroom experiences in friendly ways with fellow NICLE teachers and engaged with NICLE presenters who mutually respected and regarded them as professionals. Such affordances were said to enable teachers to engage learners in maths classes and improve their understanding of specific primary maths concepts. On the other hand teachers felt challenged by the travelling distance, limited time and also raised the tension of how to scale-up maths professional development initiatives to include schools from their community. The study makes a theoretical contribution by illustrating how Bernstein’s pedagogic identity model and its elaboration by Tyler (1999) provides analytical tools to interrogate macro educational changes and connect these to the micro processes and teacher identities.
- Full Text:
- Date Issued: 2015
Implication of tillage, texture and mineralogy on the sieving efficiency, physical-based soil organic matter and aggregate stability of some soils in the Eastern Cape
- Authors: Peter, Prince Chinedu
- Date: 2015
- Subjects: Tillage Soil management -- South Africa -- Eastern Cape Soil physics -- South Africa -- Eastern Cape , Soil structure -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10353/2710 , vital:28058
- Description: Soil structure and its associated physical properties are essential soil components. Soil texture and mineralogy are inherent soil properties that influence soil management. This study assessed the implication of tillage, texture and mineralogy on soil sieving, aggregate stability indices and physical fractions of organic matter in soils of Eastern Cape Province of South Africa. An Iris FTLVH – 0200 digital electromagnetic sieve shaker (Filtra Vibraciόn SL Spain), was used to determine settings for sieving efficiency. Mean weight diameter (MWD), water stable aggregate (WSA), state of aggregation (SA), dispersion ratio (DR), water dispersible clay (WDC), clay dispersion ratio (CDR), clay flocculation index (CFI), and potential structural deformation index (PSDI) were aggregate stability indices evaluated to check for sensitivity in evaluating aggregate stability of soils under two tillage systems and physical fractions of carbon and nitrogen in soils of Eastern Cape Province. The T4I3P2 and T4I4P3 settings were sensitive under tillage and T4I1P4, T3I4P3 and T4I4P3 were sensitive under mineralogical considerations for sieving efficiency. The total carbon in soils under conventional tillage (CT) was 17.7 g/kg and in soils under no tillage (NT) it was 15.8 g/kg. The total carbon content in the clay fraction of soils under CT was 24.1 percent higher than the total carbon content in the clay fraction of soils under NT. The total nitrogen content in the clay fraction of soils under CT was 5.4 percent higher than the total nitrogen content in the soils under NT. The total carbon in the sandy loam (SL) textured soils was 17.4 g/kg and in the sandy clay loam (SCL) textured soils it was 17.1 g/kg. The total nitrogen in SL soils was 3.7 g/kg and in SCL soils it was 3.7 g/kg. The clay fraction had higher total carbon than other fractions in Sl and SCL soils. The higher values of nitrogen were observed in the silt fraction for SL soils and clay fraction for SCL soils. The total carbon in the soils dominated with kaolinite was 17.3 g/kg and in quartz dominated soils the value was 16.9 g/kg. The total nitrogen in the soils dominated with kaolinite was 3.7 g/kg and in the soils dominated with quartz the value was 3.7 g/kg. For soils under NT the WDC was 135.8 g/kg and for soils under CT it was 139.7 g/kg. The ASC was 72.5 for soils under NT and 92.0for soils under CT. The DR was 0.9 for soils under NT and 0.8 for soils under CT. The CFI was 0.5 for soils under NT and 0.5 for soils under CT. The CDR was 0.5 for soils under NT and 0.5 for soils under CT. The MWDw was 1.6 mm for soils under NT and 1.4 mm for soils under CT. The MWDd was 4.0 mm for soils under NT and 4.0 for soils under CT. The percent WSA > 0.25 mm was 61.7 percent for soils under NT and 56.2 percent for soils under CT. The PSDI was 55.2 percent for soils under NT and 61.15 percent for soils under CT. The SA was 43.2 percent for soils under NT and 37.89 percent for soils under CT. The WDC was 125.7 g/kg for SCL soils and 151.4 g/kg for SL soils. The CDR was 0.5 for both SCL and SL soils. The DR was 0.9 for SCL soils and 0.8 for SL soils. The CFI was 0.5 for both SCL and SL soils. The ASC was 56.2 g/kg for SCL soils and 115 g/kg for SL soils. The MWDw was 1.5 mm for SCL soils and 1.4 mm for SL soils. The MWDd was 3.6 mm for SCL soils and 3.6 mm for SL soils. The percent WSA > 0.25 mm was 53.0 percent for SCL soils and 62.5 percent for SL soils. The PSDI was 59.2 percent for SCL soils and 59.7 percent for SL soils. The SA was 33.6 percent for SCL soils and 45.2 percent for SL soils. The WDC was 313.3 g/kg for kaolinitic soils and 120.7 g/kg for quartz dominated soils. The CDR was 0.5 for kaolinitic soils and 0.5 for quartz dominated soils. The DR was 0.9 for kaolinitic soils and 0.8 for quartz dominated soils. The CFI was 0.5 for kaolinitic soils and 0.5 for quartz dominated soils. The ASC was 110.0 g/kg for kaolinitic soils and 101.7 g/kg for quartz dominated soils. The WSA > 0.25 mm was 57.3 percent for quartz dominated soils and 68.4 percent for kaolinitic soils. The MWDw was 1.6 mm for quartz dominated soils and 0.8 mm for kaolinitic soils. The MWDd was 3.6 mm for quartz dominated soils and 3.4 mm for kaolinitic soils. The PSDI was 56.3 for quartz dominated soils and 76.0 for kaolinitic soils.
- Full Text:
- Date Issued: 2015
- Authors: Peter, Prince Chinedu
- Date: 2015
- Subjects: Tillage Soil management -- South Africa -- Eastern Cape Soil physics -- South Africa -- Eastern Cape , Soil structure -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10353/2710 , vital:28058
- Description: Soil structure and its associated physical properties are essential soil components. Soil texture and mineralogy are inherent soil properties that influence soil management. This study assessed the implication of tillage, texture and mineralogy on soil sieving, aggregate stability indices and physical fractions of organic matter in soils of Eastern Cape Province of South Africa. An Iris FTLVH – 0200 digital electromagnetic sieve shaker (Filtra Vibraciόn SL Spain), was used to determine settings for sieving efficiency. Mean weight diameter (MWD), water stable aggregate (WSA), state of aggregation (SA), dispersion ratio (DR), water dispersible clay (WDC), clay dispersion ratio (CDR), clay flocculation index (CFI), and potential structural deformation index (PSDI) were aggregate stability indices evaluated to check for sensitivity in evaluating aggregate stability of soils under two tillage systems and physical fractions of carbon and nitrogen in soils of Eastern Cape Province. The T4I3P2 and T4I4P3 settings were sensitive under tillage and T4I1P4, T3I4P3 and T4I4P3 were sensitive under mineralogical considerations for sieving efficiency. The total carbon in soils under conventional tillage (CT) was 17.7 g/kg and in soils under no tillage (NT) it was 15.8 g/kg. The total carbon content in the clay fraction of soils under CT was 24.1 percent higher than the total carbon content in the clay fraction of soils under NT. The total nitrogen content in the clay fraction of soils under CT was 5.4 percent higher than the total nitrogen content in the soils under NT. The total carbon in the sandy loam (SL) textured soils was 17.4 g/kg and in the sandy clay loam (SCL) textured soils it was 17.1 g/kg. The total nitrogen in SL soils was 3.7 g/kg and in SCL soils it was 3.7 g/kg. The clay fraction had higher total carbon than other fractions in Sl and SCL soils. The higher values of nitrogen were observed in the silt fraction for SL soils and clay fraction for SCL soils. The total carbon in the soils dominated with kaolinite was 17.3 g/kg and in quartz dominated soils the value was 16.9 g/kg. The total nitrogen in the soils dominated with kaolinite was 3.7 g/kg and in the soils dominated with quartz the value was 3.7 g/kg. For soils under NT the WDC was 135.8 g/kg and for soils under CT it was 139.7 g/kg. The ASC was 72.5 for soils under NT and 92.0for soils under CT. The DR was 0.9 for soils under NT and 0.8 for soils under CT. The CFI was 0.5 for soils under NT and 0.5 for soils under CT. The CDR was 0.5 for soils under NT and 0.5 for soils under CT. The MWDw was 1.6 mm for soils under NT and 1.4 mm for soils under CT. The MWDd was 4.0 mm for soils under NT and 4.0 for soils under CT. The percent WSA > 0.25 mm was 61.7 percent for soils under NT and 56.2 percent for soils under CT. The PSDI was 55.2 percent for soils under NT and 61.15 percent for soils under CT. The SA was 43.2 percent for soils under NT and 37.89 percent for soils under CT. The WDC was 125.7 g/kg for SCL soils and 151.4 g/kg for SL soils. The CDR was 0.5 for both SCL and SL soils. The DR was 0.9 for SCL soils and 0.8 for SL soils. The CFI was 0.5 for both SCL and SL soils. The ASC was 56.2 g/kg for SCL soils and 115 g/kg for SL soils. The MWDw was 1.5 mm for SCL soils and 1.4 mm for SL soils. The MWDd was 3.6 mm for SCL soils and 3.6 mm for SL soils. The percent WSA > 0.25 mm was 53.0 percent for SCL soils and 62.5 percent for SL soils. The PSDI was 59.2 percent for SCL soils and 59.7 percent for SL soils. The SA was 33.6 percent for SCL soils and 45.2 percent for SL soils. The WDC was 313.3 g/kg for kaolinitic soils and 120.7 g/kg for quartz dominated soils. The CDR was 0.5 for kaolinitic soils and 0.5 for quartz dominated soils. The DR was 0.9 for kaolinitic soils and 0.8 for quartz dominated soils. The CFI was 0.5 for kaolinitic soils and 0.5 for quartz dominated soils. The ASC was 110.0 g/kg for kaolinitic soils and 101.7 g/kg for quartz dominated soils. The WSA > 0.25 mm was 57.3 percent for quartz dominated soils and 68.4 percent for kaolinitic soils. The MWDw was 1.6 mm for quartz dominated soils and 0.8 mm for kaolinitic soils. The MWDd was 3.6 mm for quartz dominated soils and 3.4 mm for kaolinitic soils. The PSDI was 56.3 for quartz dominated soils and 76.0 for kaolinitic soils.
- Full Text:
- Date Issued: 2015
A constructivist deconstruction of post-apartheid South Africa’s trade negotiation strategies: the politics of development and global value chains
- Authors: Pillay, Morgenie
- Date: 2015
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/64731 , vital:28596
- Description: Expected release date-May 2020
- Full Text:
- Date Issued: 2015
- Authors: Pillay, Morgenie
- Date: 2015
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/64731 , vital:28596
- Description: Expected release date-May 2020
- Full Text:
- Date Issued: 2015
A positive clinical psychology approach to developing resilience among state employed nurses
- Authors: Plumb, Sarah
- Date: 2015
- Subjects: Nurses -- Job stress , Nursing -- Psychological aspects , Resilience (Personality trait)
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9955 , http://hdl.handle.net/10948/d1018879
- Description: Nurses are confronted with numerous work-related stressors that can result in burnout. This can contribute to absenteeism and high turn-over rates in the nursing profession. A review of the literature indicated that psycho-educational interventions to increase resilience could be an effective way of addressing this problem. The study aimed to develop a positive clinical-psychology approach to increasing resilience in State employed nurses. The study used a mixed-method approach to determine the current psychological functioning of a sample of 87 nurses. Quantitative data on personality traits, character strengths and levels of resilience were obtained, using the NEO PI-R, VIA – IS, and Resilience Scale. Qualitative data on the coping responses of nurses were obtained through the thematic analysis of focus groups. These data were integrated to create a positive clinical psychology conceptualisation of resilience and to develop therapeutic guidelines for a group psycho-educational intervention. The results of the study indicated a struggling psychological profile. This was defined as the ability to deal with work-related stressors – but with the potential risk of developing symptoms of burnout. The moderate levels of resilience were attributed to elevated character strengths in the sample. The distribution of personality traits indicated that the nurses in the sample were at risk of developing burnout; and this prevented them from flourishing. These data were synthesised to create therapeutic guidelines for developing resilience aimed: (1) increasing emotional stability and invulnerability; (2) increasing agreeableness; and (3) increasing conscientiousness. These guidelines were based on the personality traits that were deemed to negatively impact the resilience of the nurses. These personality traits were correlated with several character strengths that displayed strong relationships with resilience. This indicated that resilience could be developed through the cultivation of the following character strengths: perspective; perseverance; fairness; forgiveness; leadership; love; zest; hope; curiosity; and appreciation of beauty and excellence. These character strengths were identified to facilitate the positive adaptation of the personality traits identified in the therapeutic guidelines. A group psycho-educational intervention was developed, using the positive clinical psychology conceptualisation of resilience. The literature was reviewed to identify techniques to cultivate the ten character strengths specified in the therapeutic guidelines. These techniques were adapted to create experiential learning processes for the intervention. This psycho-educational programme can be applied as a secondary and tertiary intervention. It can be used to increase resilience to prevent burnout among nurses. It can also be used to psychologically empower nurses that have existing symptoms of burnout.
- Full Text:
- Date Issued: 2015
- Authors: Plumb, Sarah
- Date: 2015
- Subjects: Nurses -- Job stress , Nursing -- Psychological aspects , Resilience (Personality trait)
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:9955 , http://hdl.handle.net/10948/d1018879
- Description: Nurses are confronted with numerous work-related stressors that can result in burnout. This can contribute to absenteeism and high turn-over rates in the nursing profession. A review of the literature indicated that psycho-educational interventions to increase resilience could be an effective way of addressing this problem. The study aimed to develop a positive clinical-psychology approach to increasing resilience in State employed nurses. The study used a mixed-method approach to determine the current psychological functioning of a sample of 87 nurses. Quantitative data on personality traits, character strengths and levels of resilience were obtained, using the NEO PI-R, VIA – IS, and Resilience Scale. Qualitative data on the coping responses of nurses were obtained through the thematic analysis of focus groups. These data were integrated to create a positive clinical psychology conceptualisation of resilience and to develop therapeutic guidelines for a group psycho-educational intervention. The results of the study indicated a struggling psychological profile. This was defined as the ability to deal with work-related stressors – but with the potential risk of developing symptoms of burnout. The moderate levels of resilience were attributed to elevated character strengths in the sample. The distribution of personality traits indicated that the nurses in the sample were at risk of developing burnout; and this prevented them from flourishing. These data were synthesised to create therapeutic guidelines for developing resilience aimed: (1) increasing emotional stability and invulnerability; (2) increasing agreeableness; and (3) increasing conscientiousness. These guidelines were based on the personality traits that were deemed to negatively impact the resilience of the nurses. These personality traits were correlated with several character strengths that displayed strong relationships with resilience. This indicated that resilience could be developed through the cultivation of the following character strengths: perspective; perseverance; fairness; forgiveness; leadership; love; zest; hope; curiosity; and appreciation of beauty and excellence. These character strengths were identified to facilitate the positive adaptation of the personality traits identified in the therapeutic guidelines. A group psycho-educational intervention was developed, using the positive clinical psychology conceptualisation of resilience. The literature was reviewed to identify techniques to cultivate the ten character strengths specified in the therapeutic guidelines. These techniques were adapted to create experiential learning processes for the intervention. This psycho-educational programme can be applied as a secondary and tertiary intervention. It can be used to increase resilience to prevent burnout among nurses. It can also be used to psychologically empower nurses that have existing symptoms of burnout.
- Full Text:
- Date Issued: 2015
Diet of coastal filter feeders : impact of factors operating at different scales
- Authors: Puccinelli, Eleonora
- Date: 2015
- Subjects: Benthic animals -- Ecology -- South Africa , Benthic animals -- Nutrition
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:5929 , http://hdl.handle.net/10962/d1017807
- Description: Benthic filter feeders have a key functional role in the dynamics of coastal food web as an intermediate trophic level and bioengineers. A wide variety of factors, operating across multiple spatial scales (e.g. hydrographic regime, human activities), can affect the composition of the water column and thus the availability of food for benthic populations. Food availability in turn affects the growth, reproductive rates and survival of benthic organisms, and consequently, can influence the functioning of the entire ecosystem. This study aims to evaluate how various environmental factors may modify the diet of intertidal filter feeders living along the South African coast. Specifically, the effects of biogeography, upwelling, urbanization and freshwater input on the dietary regimes of five species of filter feeders (two mussel and three barnacle species) were investigated using fatty acid (FA) and stable isotope (SI) analyses.Strong interspecific differences were found among the five species considered. However, all species responded to factors operating at large (100s km) and meso (10s- 100s km) scales (i.e. biogeography and upwelling respectively). The barnacles exhibit habitat segregation and showed different FA and SI signatures from each other, while the two mussel species, an invasive and native species that co-occur in the same mussel beds, had partially overlapping diets. Differences in their diets were found only using FA analysis, while their SI signatures differed on only one occasion. This highlights the importance of using the appropriate tool, and ideally combined techniques, to investigate diets.FA and SI signatures of all species considered changed among the three biographical provinces (west, south and east coasts of South Africa) exhibiting similar patterns that reflect the two oceanographic regimes that characterize the coastline: the eutrophic Benguela Current on the west coast and the oligotrophic Agulhas Current on the other two coasts. Upwelling had a significant effect on FA and SI signatures, with stronger effects on the west coast than the south coast. The results indicate that benthic filter feeders at upwelling areas consumed a mix of coastal macroalgal detritus and phytoplankton, which was probably brought onshore during downwelling events. At smaller spatialscales and using repeated sampling, the influence of upwelling on the west coast was found to be pervasive, rather than discrete, so that it may be more appropriate to categorize upwelling by referring to upwelling centres and downstream areas. SI underlined a significant effect of urbanization on the diet of filter feeders with an enrichment in the δ¹⁵N being characteristic of anthropogenic effect. Although a large number of rivers characterize the South African coast, no distinct effect of freshwater input was found for either the SI or FA signatures of the filter feeders. This contrasts with earlier work on demersal species and suggests that freshwater input does not significantly affect food availability for intertidal filter feeders, and that other factors (e.g. hydrogeography) are more important in determining the diet of these populations. These results highlight that environmental and anthropogenic factors operating at different spatial and temporal scales have a profound effect on benthic ecosystems, and that they control the relationship between primary production and primary consumers in coastal areas. Above all, this work highlights the importance of understanding the spatial and temporal scales at which different factors affect feeding regimes, and their critical role in coastal food webs.
- Full Text:
- Date Issued: 2015
- Authors: Puccinelli, Eleonora
- Date: 2015
- Subjects: Benthic animals -- Ecology -- South Africa , Benthic animals -- Nutrition
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:5929 , http://hdl.handle.net/10962/d1017807
- Description: Benthic filter feeders have a key functional role in the dynamics of coastal food web as an intermediate trophic level and bioengineers. A wide variety of factors, operating across multiple spatial scales (e.g. hydrographic regime, human activities), can affect the composition of the water column and thus the availability of food for benthic populations. Food availability in turn affects the growth, reproductive rates and survival of benthic organisms, and consequently, can influence the functioning of the entire ecosystem. This study aims to evaluate how various environmental factors may modify the diet of intertidal filter feeders living along the South African coast. Specifically, the effects of biogeography, upwelling, urbanization and freshwater input on the dietary regimes of five species of filter feeders (two mussel and three barnacle species) were investigated using fatty acid (FA) and stable isotope (SI) analyses.Strong interspecific differences were found among the five species considered. However, all species responded to factors operating at large (100s km) and meso (10s- 100s km) scales (i.e. biogeography and upwelling respectively). The barnacles exhibit habitat segregation and showed different FA and SI signatures from each other, while the two mussel species, an invasive and native species that co-occur in the same mussel beds, had partially overlapping diets. Differences in their diets were found only using FA analysis, while their SI signatures differed on only one occasion. This highlights the importance of using the appropriate tool, and ideally combined techniques, to investigate diets.FA and SI signatures of all species considered changed among the three biographical provinces (west, south and east coasts of South Africa) exhibiting similar patterns that reflect the two oceanographic regimes that characterize the coastline: the eutrophic Benguela Current on the west coast and the oligotrophic Agulhas Current on the other two coasts. Upwelling had a significant effect on FA and SI signatures, with stronger effects on the west coast than the south coast. The results indicate that benthic filter feeders at upwelling areas consumed a mix of coastal macroalgal detritus and phytoplankton, which was probably brought onshore during downwelling events. At smaller spatialscales and using repeated sampling, the influence of upwelling on the west coast was found to be pervasive, rather than discrete, so that it may be more appropriate to categorize upwelling by referring to upwelling centres and downstream areas. SI underlined a significant effect of urbanization on the diet of filter feeders with an enrichment in the δ¹⁵N being characteristic of anthropogenic effect. Although a large number of rivers characterize the South African coast, no distinct effect of freshwater input was found for either the SI or FA signatures of the filter feeders. This contrasts with earlier work on demersal species and suggests that freshwater input does not significantly affect food availability for intertidal filter feeders, and that other factors (e.g. hydrogeography) are more important in determining the diet of these populations. These results highlight that environmental and anthropogenic factors operating at different spatial and temporal scales have a profound effect on benthic ecosystems, and that they control the relationship between primary production and primary consumers in coastal areas. Above all, this work highlights the importance of understanding the spatial and temporal scales at which different factors affect feeding regimes, and their critical role in coastal food webs.
- Full Text:
- Date Issued: 2015
The contribution of guest houses to economic growth and employment as key components of local economic development in the Eden District Area
- Authors: Ramukumba, Takalani
- Date: 2015
- Subjects: Economic development -- South Africa -- Western Cape , Sustainable tourism -- South Africa -- Western Cape
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/5214 , vital:20821
- Description: Tourism has come to be seen as a key driver for local economic development in South Africa, as it provides opportunities for pro-poor and community-based initiatives. On a global scale, the challenges of confronting poverty and unemployment continue to dominate the development agenda. The ability of Local Economic Development (LED) to empower local people has earned favour with national governments and development theorists. The imperative facing South Africa to achieve a more equitable and sustainable economy is essentially the challenge to adopt and implement a development approach that will reduce poverty and unemployment (which are the two key objectives of LED) to the greatest extent. It is within this context that the South African government has sought to incorporate LED into their economic development framework, predominantly through the decentralisation of development control and planning to the local government level. This study examined the contribution of guest houses to economic growth and employment as key components of LED in a sustainable manner. The study revealed that guest houses are playing a key role in the development of the local economy in the Eden district region. Guest houses are providing employment opportunities to the local residents both on a full-time and part-time basis. Further to this, guest houses are buying many locally-produced products and services from local suppliers and this contributes to economic growth of the local economy. However, this study also found that many of the guest houses in the area are not aware of government incentives available to support them and very few of them have made use of these services. This is something that needs to be addressed if these guest houses are to continue to strengthen the local economy and provide employment opportunities in a sustainable manner. The study revealed that many of the guest houses are operating in an environmentally friendly manner and this will ensure their future sustainability. The broader situation and the contribution of the accommodation sector as critical assets in local and national tourism economies has been thoroughly researched in tourism research around the world. Existing work on the accommodation sector in the South African tourism economy is mainly urban-focused and indicates that its local development impacts can be positive albeit not always maximised through local linkages, however, only a limited amount of academic investigations examines the contribution of tourism sub-sectors to economic growth and employment. The authenticity of this study is based on Its contribution which must be viewed in relation to the relatively limited body of literature in the contribution of tourism sub-sectors to economic growth and employment and in this case guest houses as one type of accommodation sub-sector.
- Full Text:
- Date Issued: 2015
- Authors: Ramukumba, Takalani
- Date: 2015
- Subjects: Economic development -- South Africa -- Western Cape , Sustainable tourism -- South Africa -- Western Cape
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/5214 , vital:20821
- Description: Tourism has come to be seen as a key driver for local economic development in South Africa, as it provides opportunities for pro-poor and community-based initiatives. On a global scale, the challenges of confronting poverty and unemployment continue to dominate the development agenda. The ability of Local Economic Development (LED) to empower local people has earned favour with national governments and development theorists. The imperative facing South Africa to achieve a more equitable and sustainable economy is essentially the challenge to adopt and implement a development approach that will reduce poverty and unemployment (which are the two key objectives of LED) to the greatest extent. It is within this context that the South African government has sought to incorporate LED into their economic development framework, predominantly through the decentralisation of development control and planning to the local government level. This study examined the contribution of guest houses to economic growth and employment as key components of LED in a sustainable manner. The study revealed that guest houses are playing a key role in the development of the local economy in the Eden district region. Guest houses are providing employment opportunities to the local residents both on a full-time and part-time basis. Further to this, guest houses are buying many locally-produced products and services from local suppliers and this contributes to economic growth of the local economy. However, this study also found that many of the guest houses in the area are not aware of government incentives available to support them and very few of them have made use of these services. This is something that needs to be addressed if these guest houses are to continue to strengthen the local economy and provide employment opportunities in a sustainable manner. The study revealed that many of the guest houses are operating in an environmentally friendly manner and this will ensure their future sustainability. The broader situation and the contribution of the accommodation sector as critical assets in local and national tourism economies has been thoroughly researched in tourism research around the world. Existing work on the accommodation sector in the South African tourism economy is mainly urban-focused and indicates that its local development impacts can be positive albeit not always maximised through local linkages, however, only a limited amount of academic investigations examines the contribution of tourism sub-sectors to economic growth and employment. The authenticity of this study is based on Its contribution which must be viewed in relation to the relatively limited body of literature in the contribution of tourism sub-sectors to economic growth and employment and in this case guest houses as one type of accommodation sub-sector.
- Full Text:
- Date Issued: 2015
Effect of post-slaughter handling on physico-chemical and microbiological quality of red meat along the distribution chain in the Eastern Cape Province, South Africa
- Authors: Rani, Zikhona Theodora
- Date: 2015
- Subjects: Meat -- Microbiology Meat -- Transportation -- South Africa -- Eastern Cape Meat -- Quality -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10353/2490 , vital:27875
- Description: The broad objective of the study was to investigate the effect of post-slaughter handling in the distribution chain on red meat quality and safety. A survey was conducted among 300 consumers and 100 meat handlers in five different municipalities (Buffalo City, Nkonkobe, Ngqushwa, Lukhanje and Amahlathi) in the Eastern Cape Province of South Africa to investigate their perceptions on meat quality and safety, together with challenges faced by meat handlers during the distribution of meat from the abattoir to retailers. The microbiological profile and physico-chemical quality of red meat at different stages of the abattoir to retail outlets in the distribution chain were also determined. Swabs (n=216) and meat samples (n=450) were collected from beef, pork and mutton carcasses during the loading process of carcasses into trucks at the abattoir, when offloading carcasses at the supply points and during marketing. Physico-chemical qualities such as colour (L* - lightness, b* - redness and a* - yellowness) and meat pH measurements were taken at each point. To determine the microbiological profiles of the carcasses, four microbiological parameters were considered: Total bacteria count (general bacteria), coliform count (related to hygiene and indicator for pathogens), Escherichia coli (Gram-negative pathogen) and Staphylococcus aureus (Gram-positive pathogen). Two types of packaging (vacuum and overwrapping) were used to determine their effect on shelf-life and microbiological quality of red meat under the normal marketing conditions over a storage duration of 15 days. The results from the study showed low awareness of consumers about the pathogenic diseases which arise from meat. A strong significant association (p ˂ 0.05) between educational status and awareness on meat safety was observed. Most of the consumers perceived that quality goes beyond safety such that 35.6 percent of the respondents indicated that they did not have a problem with consuming spoiled meat, whilst the remaining 64.4 percent indicated that they would r eject spoiled meat. Although retailers indicated that they take meat safety into consideration in their shops, 92 percent of the retailers revealed that they do not perform microbial assessment of meat in their shops. A series of loading and off-loading, temperature fluctuations, environmental temperatures and ques during offloading were reported as the major challenges during transportation of carcasses from the abattoir to the supply points. The microbial counts were significantly (p<0.05) higher in samples from the commercial abattoir than in those from the communal abattoir. Escherichia coli was the predominant microbial contaminant in the samples from both abattoirs. When following the chain, total bacterial count (TBC), coliform count (CC) and the levels of E. coli contamination increased progressively between the loading and the off-loading points (5.1 to 7.9 log10 CFU/cm2; 5.0 to 5.6 log10 CFU/cm2 and 2.7 to 3.7 log10 CFU/cm2, respectively). The storage period, meat type, distance during transportation and temperature were found to have a significant impact on the microbial levels during the distribution of carcasses. Distribution stage had a significant effect (p<0.05) on some of the physico- chemical meat quality attributes and differences in the lightness (L*) and redness (a*) values between the loading, off-loading and display points were observed. Consumers perceived retailer class as one of the factors influencing meat quality, but according to the instrumental measurements retailer class did not have a significant effect on physico-chemical meat quality. However, distance and storage duration significantly (p<0.05) affected (L*) and (a*) values in the meat during distribution chain. Vacuum and overwrapping packaging significantly affected (p<0.05) the shelf life of meat. Therefore, it was concluded that post-slaughter handling during the distribution chain affects the physico- chemical, microbiological and shelf-life of meat.
- Full Text:
- Date Issued: 2015
- Authors: Rani, Zikhona Theodora
- Date: 2015
- Subjects: Meat -- Microbiology Meat -- Transportation -- South Africa -- Eastern Cape Meat -- Quality -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10353/2490 , vital:27875
- Description: The broad objective of the study was to investigate the effect of post-slaughter handling in the distribution chain on red meat quality and safety. A survey was conducted among 300 consumers and 100 meat handlers in five different municipalities (Buffalo City, Nkonkobe, Ngqushwa, Lukhanje and Amahlathi) in the Eastern Cape Province of South Africa to investigate their perceptions on meat quality and safety, together with challenges faced by meat handlers during the distribution of meat from the abattoir to retailers. The microbiological profile and physico-chemical quality of red meat at different stages of the abattoir to retail outlets in the distribution chain were also determined. Swabs (n=216) and meat samples (n=450) were collected from beef, pork and mutton carcasses during the loading process of carcasses into trucks at the abattoir, when offloading carcasses at the supply points and during marketing. Physico-chemical qualities such as colour (L* - lightness, b* - redness and a* - yellowness) and meat pH measurements were taken at each point. To determine the microbiological profiles of the carcasses, four microbiological parameters were considered: Total bacteria count (general bacteria), coliform count (related to hygiene and indicator for pathogens), Escherichia coli (Gram-negative pathogen) and Staphylococcus aureus (Gram-positive pathogen). Two types of packaging (vacuum and overwrapping) were used to determine their effect on shelf-life and microbiological quality of red meat under the normal marketing conditions over a storage duration of 15 days. The results from the study showed low awareness of consumers about the pathogenic diseases which arise from meat. A strong significant association (p ˂ 0.05) between educational status and awareness on meat safety was observed. Most of the consumers perceived that quality goes beyond safety such that 35.6 percent of the respondents indicated that they did not have a problem with consuming spoiled meat, whilst the remaining 64.4 percent indicated that they would r eject spoiled meat. Although retailers indicated that they take meat safety into consideration in their shops, 92 percent of the retailers revealed that they do not perform microbial assessment of meat in their shops. A series of loading and off-loading, temperature fluctuations, environmental temperatures and ques during offloading were reported as the major challenges during transportation of carcasses from the abattoir to the supply points. The microbial counts were significantly (p<0.05) higher in samples from the commercial abattoir than in those from the communal abattoir. Escherichia coli was the predominant microbial contaminant in the samples from both abattoirs. When following the chain, total bacterial count (TBC), coliform count (CC) and the levels of E. coli contamination increased progressively between the loading and the off-loading points (5.1 to 7.9 log10 CFU/cm2; 5.0 to 5.6 log10 CFU/cm2 and 2.7 to 3.7 log10 CFU/cm2, respectively). The storage period, meat type, distance during transportation and temperature were found to have a significant impact on the microbial levels during the distribution of carcasses. Distribution stage had a significant effect (p<0.05) on some of the physico- chemical meat quality attributes and differences in the lightness (L*) and redness (a*) values between the loading, off-loading and display points were observed. Consumers perceived retailer class as one of the factors influencing meat quality, but according to the instrumental measurements retailer class did not have a significant effect on physico-chemical meat quality. However, distance and storage duration significantly (p<0.05) affected (L*) and (a*) values in the meat during distribution chain. Vacuum and overwrapping packaging significantly affected (p<0.05) the shelf life of meat. Therefore, it was concluded that post-slaughter handling during the distribution chain affects the physico- chemical, microbiological and shelf-life of meat.
- Full Text:
- Date Issued: 2015
Developing the marital life course perspective as a conceptual framework for describing and understanding marital life events and marital transitions
- Authors: Rautenbach, John Victor
- Date: 2015
- Subjects: Marriage , Marital status , Married people
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/2991 , vital:20384
- Description: This research seeks to explore the development of the Marital Life Course Perspective as a conceptual framework for describing and understanding marital life events and marital transitions. The study’s orientation is guided by the Life Course Perspective (Glen Elder Jr.) as a theoretical framework and draws on Interpretative Phenomenological Analysis (Jonathan Smith) and Concept Analysis (Walker & Avant) as methodological approaches. One hundred and thirty (130) academic works that use the term marital life course in their texts constituted a literature-dataset for a Concept Analysis (Walker & Avant, 1988; 2011) that tracked the theoretical development of the Marital Life Course Perspective since 1980 (George, 1980, p. 80). The residents of retirement centres and old age homes in East London and Buffalo City (all older than 65 years of age) were invited to share a retrospective history of their relationship experiences, about their multiple marital life events and the marital transitions that shaped their marital life course. The 16 women who participated in the in-depth interviews had all been previously married more than once and were currently single due to divorce or the death of their husbands. This empirical data was analysed using Interpretative Phenomenological Analysis (IPA) as a guide (Smith, Flowers, & Larkin, 2009). After the analysis and synthesis of both datasets the following proposed operational definition of the Marital Life Course Perspective was constructed: The Marital Life Course Perspective is a conceptual framework for describing and understanding marital life events and marital transitions. As a subset of the Life Course Perspective, the Marital Life Course Perspective seeks to understand all stages of the marital experience within their wider social and cultural contexts, which are shaped by the historical dimension of a cohort’s specific time and geographic location. Marital life events include, but are not limited to, marital status changes. An individual may experience multiple marriage life events throughout their life, each with associated role transitions that vary according to their temporality and the individuals whose lives are linked to the marital experience. Well-being and transition outcomes across the marital life course may be promoted or impeded by an interplay of risk and protective factors, and agency-related capacity or resilience.
- Full Text:
- Date Issued: 2015
- Authors: Rautenbach, John Victor
- Date: 2015
- Subjects: Marriage , Marital status , Married people
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/2991 , vital:20384
- Description: This research seeks to explore the development of the Marital Life Course Perspective as a conceptual framework for describing and understanding marital life events and marital transitions. The study’s orientation is guided by the Life Course Perspective (Glen Elder Jr.) as a theoretical framework and draws on Interpretative Phenomenological Analysis (Jonathan Smith) and Concept Analysis (Walker & Avant) as methodological approaches. One hundred and thirty (130) academic works that use the term marital life course in their texts constituted a literature-dataset for a Concept Analysis (Walker & Avant, 1988; 2011) that tracked the theoretical development of the Marital Life Course Perspective since 1980 (George, 1980, p. 80). The residents of retirement centres and old age homes in East London and Buffalo City (all older than 65 years of age) were invited to share a retrospective history of their relationship experiences, about their multiple marital life events and the marital transitions that shaped their marital life course. The 16 women who participated in the in-depth interviews had all been previously married more than once and were currently single due to divorce or the death of their husbands. This empirical data was analysed using Interpretative Phenomenological Analysis (IPA) as a guide (Smith, Flowers, & Larkin, 2009). After the analysis and synthesis of both datasets the following proposed operational definition of the Marital Life Course Perspective was constructed: The Marital Life Course Perspective is a conceptual framework for describing and understanding marital life events and marital transitions. As a subset of the Life Course Perspective, the Marital Life Course Perspective seeks to understand all stages of the marital experience within their wider social and cultural contexts, which are shaped by the historical dimension of a cohort’s specific time and geographic location. Marital life events include, but are not limited to, marital status changes. An individual may experience multiple marriage life events throughout their life, each with associated role transitions that vary according to their temporality and the individuals whose lives are linked to the marital experience. Well-being and transition outcomes across the marital life course may be promoted or impeded by an interplay of risk and protective factors, and agency-related capacity or resilience.
- Full Text:
- Date Issued: 2015
An international study on the influence of intrinsic rewards on the intrinsic motivation, work engagement and retention of employees in non-profit organisations
- Authors: Renard, Michelle
- Date: 2015
- Subjects: Employee motivation , Achievement motivation , Organisational behaviour
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/5148 , vital:20815
- Description: The primary objective of this thesis was to investigate whether intrinsic rewards play a role in the intrinsic motivation, work engagement and retention of employees working within non-profit organisations in Australia, Belgium, South Africa and the United States of America. It therefore served to form a cross-cultural comparison between employees from these four geographically dispersed yet culturally similar countries. A further aim was to determine whether demographic differences occurred across the four constructs studied. In order to achieve these objectives, a theoretical model was constructed to highlight the relationships between the constructs under study. The study made use of both qualitative and quantitative research to achieve the above-mentioned objectives. As a result of the data obtained from 15 qualitative interviews conducted with non-profit employees in Belgium and South Africa, two measuring instruments, namely the Intrinsic Work Rewards Scale and the Intrinsic Work Motivation Scale, were developed to assess intrinsic rewards and intrinsic motivation respectively. These measuring instruments were qualitatively piloted on a sample of academics and non-profit employees, and were translated from English into Dutch for use on the Belgian sample. Once these instruments had been refined, they were combined with instruments to measure work engagement and intention to quit to form a composite questionnaire. This questionnaire was completed electronically by 587 non-profit employees from the four countries under study. Data analysis was conducted in the form of descriptive and inferential statistics, including frequency tables, Cronbach’s alpha testing, exploratory and confirmatory factor analysis, Pearson’s Product Moment Correlations, chi-square tests, t-tests, analysis of variance and structural equation modelling. The quantitative findings showed that intrinsic rewards lead to higher levels of intrinsic motivation, which in turn causes higher levels of work engagement and lower levels of intention to quit. Intrinsic rewards were also found directly to predict a reduction in employees’ intentions to quit their non-profit organisations, and work engagement directly predicted an increase in intention to quit. From a cross-cultural perspective, practically significant inter-country differences were discovered across the intrinsic rewards of meaningful work and challenging work; across intrinsic motivation and its three dimensions (personal connection to one’s work, personal desire to make a difference, and personal desire to perform); and across work engagement and its three factors (absorption, dedication and vigour). In addition to these inter-country results, age and job level differences were discovered across the four constructs under study, together with significant correlations between the four constructs. The Intrinsic Work Rewards Scale and the Intrinsic Work Motivation Scale were successfully validated in both English and Dutch in this study, with a number of forms of validity being confirmed through factor analyses and correlations. Reliability was proven through satisfactory Cronbach’s alpha values being obtained for both language versions of the instruments. These results theoretically contribute to literature pertaining to intrinsic rewards and intrinsic motivation as a result of the development of two measuring instruments that were empirically validated to assess these constructs. Furthermore, the results make a valuable contribution to the field of rewards management globally. This study’s findings provide evidence for causal relationships between four constructs not previously tested empirically, specifically within Australia, Belgium, South Africa and the United States of America. Consequently, this study’s results hold important implications for the management of non-profit employees worldwide.
- Full Text:
- Date Issued: 2015
- Authors: Renard, Michelle
- Date: 2015
- Subjects: Employee motivation , Achievement motivation , Organisational behaviour
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: http://hdl.handle.net/10948/5148 , vital:20815
- Description: The primary objective of this thesis was to investigate whether intrinsic rewards play a role in the intrinsic motivation, work engagement and retention of employees working within non-profit organisations in Australia, Belgium, South Africa and the United States of America. It therefore served to form a cross-cultural comparison between employees from these four geographically dispersed yet culturally similar countries. A further aim was to determine whether demographic differences occurred across the four constructs studied. In order to achieve these objectives, a theoretical model was constructed to highlight the relationships between the constructs under study. The study made use of both qualitative and quantitative research to achieve the above-mentioned objectives. As a result of the data obtained from 15 qualitative interviews conducted with non-profit employees in Belgium and South Africa, two measuring instruments, namely the Intrinsic Work Rewards Scale and the Intrinsic Work Motivation Scale, were developed to assess intrinsic rewards and intrinsic motivation respectively. These measuring instruments were qualitatively piloted on a sample of academics and non-profit employees, and were translated from English into Dutch for use on the Belgian sample. Once these instruments had been refined, they were combined with instruments to measure work engagement and intention to quit to form a composite questionnaire. This questionnaire was completed electronically by 587 non-profit employees from the four countries under study. Data analysis was conducted in the form of descriptive and inferential statistics, including frequency tables, Cronbach’s alpha testing, exploratory and confirmatory factor analysis, Pearson’s Product Moment Correlations, chi-square tests, t-tests, analysis of variance and structural equation modelling. The quantitative findings showed that intrinsic rewards lead to higher levels of intrinsic motivation, which in turn causes higher levels of work engagement and lower levels of intention to quit. Intrinsic rewards were also found directly to predict a reduction in employees’ intentions to quit their non-profit organisations, and work engagement directly predicted an increase in intention to quit. From a cross-cultural perspective, practically significant inter-country differences were discovered across the intrinsic rewards of meaningful work and challenging work; across intrinsic motivation and its three dimensions (personal connection to one’s work, personal desire to make a difference, and personal desire to perform); and across work engagement and its three factors (absorption, dedication and vigour). In addition to these inter-country results, age and job level differences were discovered across the four constructs under study, together with significant correlations between the four constructs. The Intrinsic Work Rewards Scale and the Intrinsic Work Motivation Scale were successfully validated in both English and Dutch in this study, with a number of forms of validity being confirmed through factor analyses and correlations. Reliability was proven through satisfactory Cronbach’s alpha values being obtained for both language versions of the instruments. These results theoretically contribute to literature pertaining to intrinsic rewards and intrinsic motivation as a result of the development of two measuring instruments that were empirically validated to assess these constructs. Furthermore, the results make a valuable contribution to the field of rewards management globally. This study’s findings provide evidence for causal relationships between four constructs not previously tested empirically, specifically within Australia, Belgium, South Africa and the United States of America. Consequently, this study’s results hold important implications for the management of non-profit employees worldwide.
- Full Text:
- Date Issued: 2015
Methods to improve the effective implementation of organisational codes of conduct
- Robinson, Bryan Michael Kenneth
- Authors: Robinson, Bryan Michael Kenneth
- Date: 2015
- Subjects: Business ethics , Organizational behavior -- Moral and ethical aspects
- Language: English
- Type: Thesis , Doctoral , DBA
- Identifier: http://hdl.handle.net/10948/6541 , vital:21105
- Description: This research explores methods to improve code of conduct effectiveness. Misconduct is a common phenomenon in the business environment, even in the face of increased regulation, and the adoption of codes of conduct by organisations. This impacts negatively on organisations’ reputations, results in financial loss, and has a negative impact on the sustainability of businesses. While researchers suggest that codes of conduct should reduce misconduct and improve the ethical culture of organisations, mixed research results suggest codes of conduct are not always effective. While research into code of conduct effectiveness proliferates, seldom does such research take a holistic approach to understanding effectiveness of codes of conduct. Models proposed to better research code of conduct effectiveness, such as Kaptein and Schwartz’ (2008) integrated research model, do not present guidelines for better developing and implementing codes of conduct. Therefore the primary research objective was to develop a benchmarking framework which could provide insight into factors that could influence code of conduct effectiveness, and provide guidelines on how these factors should be influenced and accounted for to improve code of conduct effectiveness. Content of codes of conduct can play an important part in code of conduct effectiveness, yet they vary enormously in terms of provisions, language, tone, style, design. Some are directional or rules based, others aspirational, or values based. Bettcher, Deshpandé, Margolis and Paine (2005) developed the Global Business Standards Codex that depicted the most commonly found provisions in organisations they surveyed. A secondary research objective was therefore to apply this codex to the evaluation of participating organisations codes of conduct, and in so doing, evaluate the suitability of the codex as a benchmarking framework for the content of the code of conduct. Adopting a grounded theory methodological approach and code of conduct content analysis, the researcher investigated nine of South Africa’s largest multinational organisations in order to understand the factors influencing their code of conduct effectiveness better. The research makes a significant contribution to the understanding of codes of conduct, their effectiveness, and provides practical guidelines on improving their effectiveness. This is achieved by 1) presenting nine formulae for an effective code of conduct; 2) detailing a multi-dimensional model that can facilitate the effectiveness of codes of conduct; and 3) improving the codex developed by Bettcher et al. (2005) on the content of codes of conduct with the proposed code of conduct architecture criterion.
- Full Text:
- Date Issued: 2015
- Authors: Robinson, Bryan Michael Kenneth
- Date: 2015
- Subjects: Business ethics , Organizational behavior -- Moral and ethical aspects
- Language: English
- Type: Thesis , Doctoral , DBA
- Identifier: http://hdl.handle.net/10948/6541 , vital:21105
- Description: This research explores methods to improve code of conduct effectiveness. Misconduct is a common phenomenon in the business environment, even in the face of increased regulation, and the adoption of codes of conduct by organisations. This impacts negatively on organisations’ reputations, results in financial loss, and has a negative impact on the sustainability of businesses. While researchers suggest that codes of conduct should reduce misconduct and improve the ethical culture of organisations, mixed research results suggest codes of conduct are not always effective. While research into code of conduct effectiveness proliferates, seldom does such research take a holistic approach to understanding effectiveness of codes of conduct. Models proposed to better research code of conduct effectiveness, such as Kaptein and Schwartz’ (2008) integrated research model, do not present guidelines for better developing and implementing codes of conduct. Therefore the primary research objective was to develop a benchmarking framework which could provide insight into factors that could influence code of conduct effectiveness, and provide guidelines on how these factors should be influenced and accounted for to improve code of conduct effectiveness. Content of codes of conduct can play an important part in code of conduct effectiveness, yet they vary enormously in terms of provisions, language, tone, style, design. Some are directional or rules based, others aspirational, or values based. Bettcher, Deshpandé, Margolis and Paine (2005) developed the Global Business Standards Codex that depicted the most commonly found provisions in organisations they surveyed. A secondary research objective was therefore to apply this codex to the evaluation of participating organisations codes of conduct, and in so doing, evaluate the suitability of the codex as a benchmarking framework for the content of the code of conduct. Adopting a grounded theory methodological approach and code of conduct content analysis, the researcher investigated nine of South Africa’s largest multinational organisations in order to understand the factors influencing their code of conduct effectiveness better. The research makes a significant contribution to the understanding of codes of conduct, their effectiveness, and provides practical guidelines on improving their effectiveness. This is achieved by 1) presenting nine formulae for an effective code of conduct; 2) detailing a multi-dimensional model that can facilitate the effectiveness of codes of conduct; and 3) improving the codex developed by Bettcher et al. (2005) on the content of codes of conduct with the proposed code of conduct architecture criterion.
- Full Text:
- Date Issued: 2015
Fibre optic network supporting high speed transmission in the square kilometre array, South Africa
- Authors: Rotich, Enoch Kirwa
- Date: 2015
- Subjects: Optical communications , Fiber optics , Telecommunication systems
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10948/6552 , vital:21109
- Description: This thesis provides in-depth information on the high speed optical transport requirements for the Square Kilometre Array. The stringent data rates as well as timing and synchronization requirements are dealt with respect to the optical fibre technology. Regarding the data transport, we draw a clear comparison between a typical telecommunication access network and a telescope network. Invoking simulations and experiments on the field and laboratory test bed, we successfully implement a suitable telescope network using vertical cavity surface emitting laser (VCSEL) technology. Polarization effects on the KAT-7 telescope network, an operational prototype for the SKA is studied so as to estimate the expected effect in the MeerKAT telescope with transmission distances _ 12 km. The study further relates the obtained values to the expected impact on the distribution of the time and frequency reference in the MeerKAT array. Clock stability depends on the differential group delay (DGD) and polarization stability. On a 10:25 km link that includes the riser cable a DGD of 62:1 fs was attained. This corresponds to a polarization mode dispersion (PMD) coefficient of 19:4 fs=km1=2. This is a low PMD value considering telecommunication network. The PMD value is within the allowed budget in the telescope network. However, this may not be the case at longer baselines extending to over 1000 km as expected in SKA 2. The fibre's deployment contribution to the DGD is measured by comparing the deployed fibre to the undeployed of equal lengths. On the 10:25 km deployed single mode fibre, the maximum and mean DGDs measured were 217:7 fs and 84:8 fs respectively. The undeployed fibre of similar type and equal length, gave a maximum and minimum DGDs of 58:6 fs and 36:3 fs respectively. The deployment is seen to increase the maximum and minimum DGDs by factors of 3.7 and 2.3 respectively. This implies that fibre deployment is very critical in ensuring the birefringence is minimized. Polarization fluctuation recorded a maximum of 180o during the 15 hour real time astronomer use of the antenna. To ascertain the contribution of the riser cable, state of polarization (SOP) of the buried section of the single mode fibre in the link was established. A maximum SOP change of 14o over 15 hour monitoring was measured. From the stability realized on the buried section of the fibre, the change in polarization is contributed by the riser cable. The fluctuation in polarization can cause the phase of a clock signal to drift between the birefringent axes by an equal amount corresponding to DGD. We experimentally demonstrate how polarization stabilization can be attained using the polarization maintaining fibre. We also demonstrate the applicability of VCSEL technology in the SKA unidirectional data flow especially for shorter baselines < 100 km. The VCSEL is a low cost light source with attractive advantages such as low power consumption, high speed capabilities and wavelength tuneability. This work entails the use of traditional amplitude modulation commonly known as non-return-to-zero (NRZ) on-off keying (OOK) because of its simplicity and cost. For the MeerKAT typical distances, we show that even in a worst case scenario, the use of VCSEL on different fibres in MeerKAT distance is achievable. Using the impairment reduction approach, we successfully manage to achieve transmission distance beyond MeerKAT. Several in-line dispersion compensation mechanisms in telecommunication have been successfully employed. The work focused on the use of negative dispersion fibre to mitigate the chromatic dispersion effects in the optical fibre. The inverse dispersion fibre (IDF) is proposed for compensation in the conventional zero dispersion wavelength fibres, G.652 that are used at the third window. Similarly, the chromatic dispersion compensation of non-zero dispersion shifted fibre (NZDSF) is experimentally demonstrated using negative dispersion submarine reduced slope (SRS), G. 655 (-). With dispersion management, we demonstrate how transmissions beyond MeerKAT baselines can be achieved error free. A systematic investigation of the use of distributed Raman amplification to overcome the attenuation losses is provided. High on-off gains of up to 15 dB, 8 dB and 5 dB for bidirectional, forward and backward pumping respectively is achieved on a 25 km Raman optimized NZDSF-Reach fibre. Combined dispersion mitigation technique and low noise distributed Raman amplification, up to about 80 km transmission was achieved on a 4:25 Gbps modulated VCSEL using a single pump. Using bidirectional pumping, more than 100 km of transmission was achieved error free. The high gains enhance the VCSEL transmission distance. We further suggest a novel way of using the Raman pump to distribute the clock signal while amplifying the data signal streaming the astronomical data from the remote placed telescope receivers. In summary, the work presented in this thesis has demonstrated the potential use of VCSEL technology for data collection in the telescope array. We have studied the optical effects and mitigation so as to improve the clock and data transmission. This work is relevant and valuable in providing SKA with VCSELs, an option for extremely high network performance at reasonable costs.
- Full Text:
- Date Issued: 2015
- Authors: Rotich, Enoch Kirwa
- Date: 2015
- Subjects: Optical communications , Fiber optics , Telecommunication systems
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10948/6552 , vital:21109
- Description: This thesis provides in-depth information on the high speed optical transport requirements for the Square Kilometre Array. The stringent data rates as well as timing and synchronization requirements are dealt with respect to the optical fibre technology. Regarding the data transport, we draw a clear comparison between a typical telecommunication access network and a telescope network. Invoking simulations and experiments on the field and laboratory test bed, we successfully implement a suitable telescope network using vertical cavity surface emitting laser (VCSEL) technology. Polarization effects on the KAT-7 telescope network, an operational prototype for the SKA is studied so as to estimate the expected effect in the MeerKAT telescope with transmission distances _ 12 km. The study further relates the obtained values to the expected impact on the distribution of the time and frequency reference in the MeerKAT array. Clock stability depends on the differential group delay (DGD) and polarization stability. On a 10:25 km link that includes the riser cable a DGD of 62:1 fs was attained. This corresponds to a polarization mode dispersion (PMD) coefficient of 19:4 fs=km1=2. This is a low PMD value considering telecommunication network. The PMD value is within the allowed budget in the telescope network. However, this may not be the case at longer baselines extending to over 1000 km as expected in SKA 2. The fibre's deployment contribution to the DGD is measured by comparing the deployed fibre to the undeployed of equal lengths. On the 10:25 km deployed single mode fibre, the maximum and mean DGDs measured were 217:7 fs and 84:8 fs respectively. The undeployed fibre of similar type and equal length, gave a maximum and minimum DGDs of 58:6 fs and 36:3 fs respectively. The deployment is seen to increase the maximum and minimum DGDs by factors of 3.7 and 2.3 respectively. This implies that fibre deployment is very critical in ensuring the birefringence is minimized. Polarization fluctuation recorded a maximum of 180o during the 15 hour real time astronomer use of the antenna. To ascertain the contribution of the riser cable, state of polarization (SOP) of the buried section of the single mode fibre in the link was established. A maximum SOP change of 14o over 15 hour monitoring was measured. From the stability realized on the buried section of the fibre, the change in polarization is contributed by the riser cable. The fluctuation in polarization can cause the phase of a clock signal to drift between the birefringent axes by an equal amount corresponding to DGD. We experimentally demonstrate how polarization stabilization can be attained using the polarization maintaining fibre. We also demonstrate the applicability of VCSEL technology in the SKA unidirectional data flow especially for shorter baselines < 100 km. The VCSEL is a low cost light source with attractive advantages such as low power consumption, high speed capabilities and wavelength tuneability. This work entails the use of traditional amplitude modulation commonly known as non-return-to-zero (NRZ) on-off keying (OOK) because of its simplicity and cost. For the MeerKAT typical distances, we show that even in a worst case scenario, the use of VCSEL on different fibres in MeerKAT distance is achievable. Using the impairment reduction approach, we successfully manage to achieve transmission distance beyond MeerKAT. Several in-line dispersion compensation mechanisms in telecommunication have been successfully employed. The work focused on the use of negative dispersion fibre to mitigate the chromatic dispersion effects in the optical fibre. The inverse dispersion fibre (IDF) is proposed for compensation in the conventional zero dispersion wavelength fibres, G.652 that are used at the third window. Similarly, the chromatic dispersion compensation of non-zero dispersion shifted fibre (NZDSF) is experimentally demonstrated using negative dispersion submarine reduced slope (SRS), G. 655 (-). With dispersion management, we demonstrate how transmissions beyond MeerKAT baselines can be achieved error free. A systematic investigation of the use of distributed Raman amplification to overcome the attenuation losses is provided. High on-off gains of up to 15 dB, 8 dB and 5 dB for bidirectional, forward and backward pumping respectively is achieved on a 25 km Raman optimized NZDSF-Reach fibre. Combined dispersion mitigation technique and low noise distributed Raman amplification, up to about 80 km transmission was achieved on a 4:25 Gbps modulated VCSEL using a single pump. Using bidirectional pumping, more than 100 km of transmission was achieved error free. The high gains enhance the VCSEL transmission distance. We further suggest a novel way of using the Raman pump to distribute the clock signal while amplifying the data signal streaming the astronomical data from the remote placed telescope receivers. In summary, the work presented in this thesis has demonstrated the potential use of VCSEL technology for data collection in the telescope array. We have studied the optical effects and mitigation so as to improve the clock and data transmission. This work is relevant and valuable in providing SKA with VCSELs, an option for extremely high network performance at reasonable costs.
- Full Text:
- Date Issued: 2015
The role of academic middle managers in the planning and implementation of curriculum change in private higher education institutions in Botswana
- Authors: Rudhumbu, Norman
- Date: 2015
- Subjects: Universities and colleges -- Botswana -- Administration Education, Higher -- Aims and objectives -- Botswana Curriculum planning -- Botswana
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10353/2979 , vital:28214
- Description: The purpose of the study was to examine the role of academic middle managers (AMMs) in the planning and implementation of curriculum change in private higher education institutions in Botswana. This study employed a mixed methods research approach which utilised a structured questionnaire and a semi-structured interview guide to gather data on AMMs‟ role in the planning and implementation of curriculum change in PHEIs in Botswana. SPSS version 21 was used for analysing quantitative data while thematic analysis was used for analysing qualitative data on the role of AMMs in the planning and implementation of curriculum change in PHEIs. The study showed that the role of AMMs in the planning and implementation of curriculum change in PHEIs was too complex and demanding because they spent most of their time on daily administrative routines instead of on core academic activities such as planning and implementing curriculum change in their departments. The AMMs in the PHEIs under study operated more like managers in academic departments than academics in management. As a result the study showed that AMMs faced more challenges than opportunities in their planning and implementation of curriculum change in PHEIs. The major challenges AMMs faced in the planning and implementation of curriculum change were a highly controlled and strict work environment, role conflict, lack of autonomy, role strain and heavy workloads which limited the time AMMs spent on the core business of managing curriculum change in their departments. The study also highlighted some of the strategies albeit a few, which, despite the numerous challenges AMMs faced, are used to try and make the planning and implementation of curriculum change by AMMs was to some extent successful. The study provided insight on the influence of AMMs biographical characteristics as well as the influence of AMM job requirements (such as having a detailed job description and having authority over curriculum matters) on how AMMs enacted their role in curriculum change. Based on the results of the study, a model to assist AMMs in the effective planning and implementation of curriculum change was proposed.
- Full Text:
- Date Issued: 2015
- Authors: Rudhumbu, Norman
- Date: 2015
- Subjects: Universities and colleges -- Botswana -- Administration Education, Higher -- Aims and objectives -- Botswana Curriculum planning -- Botswana
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10353/2979 , vital:28214
- Description: The purpose of the study was to examine the role of academic middle managers (AMMs) in the planning and implementation of curriculum change in private higher education institutions in Botswana. This study employed a mixed methods research approach which utilised a structured questionnaire and a semi-structured interview guide to gather data on AMMs‟ role in the planning and implementation of curriculum change in PHEIs in Botswana. SPSS version 21 was used for analysing quantitative data while thematic analysis was used for analysing qualitative data on the role of AMMs in the planning and implementation of curriculum change in PHEIs. The study showed that the role of AMMs in the planning and implementation of curriculum change in PHEIs was too complex and demanding because they spent most of their time on daily administrative routines instead of on core academic activities such as planning and implementing curriculum change in their departments. The AMMs in the PHEIs under study operated more like managers in academic departments than academics in management. As a result the study showed that AMMs faced more challenges than opportunities in their planning and implementation of curriculum change in PHEIs. The major challenges AMMs faced in the planning and implementation of curriculum change were a highly controlled and strict work environment, role conflict, lack of autonomy, role strain and heavy workloads which limited the time AMMs spent on the core business of managing curriculum change in their departments. The study also highlighted some of the strategies albeit a few, which, despite the numerous challenges AMMs faced, are used to try and make the planning and implementation of curriculum change by AMMs was to some extent successful. The study provided insight on the influence of AMMs biographical characteristics as well as the influence of AMM job requirements (such as having a detailed job description and having authority over curriculum matters) on how AMMs enacted their role in curriculum change. Based on the results of the study, a model to assist AMMs in the effective planning and implementation of curriculum change was proposed.
- Full Text:
- Date Issued: 2015
An assessment of public accountability mechanisms towards eradicating corruption in the Eastern Cape
- Authors: Rulashe, Tando
- Date: 2015
- Subjects: Political corruption -- South Africa -- Eastern Cape Misconduct in office -- South Africa -- Eastern Cape Municipal government -- South Africa -- Eastern Cape , Local government -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10353/1960 , vital:27588
- Description: The study critically examined the implementation of Public Accountability strategies and mechanisms: A case of Buffalo City Municipality. The problem statement gave emphases on the multiple cases drawn from stats reflected in domestic surveys that shows how corruption and maladministration have impacted the province negatively as well as the extreme poverty lines that dominate the communities in the republic and also the province. The New Public Management Theory was used to interpret the manner in which the participants were expected to give their views on leadership and accountability among others key issues. The objectives of the study were to; To assess the mechanisms implemented by Buffalo City Municipality., To explore the challenges affecting public accountability enforcement mechanisms in Buffalo City Municipality towards eradicating corruption, Determine the manner through which the Buffalo City Municipality can adopt tried and tested mechanism from Regional, national & international case studies on how to effective enforce public accountability for the sustainable management and curbing of corruption for effective and efficient service delivery and to recommend new mechanisms which Buffalo City Municipality can utilise in enforcing public accountability towards eradicating corruption in its institutions in order to encourage sustainable community development through service delivery. The study adopted a case study approach based on a mixed method paradigm where data was collected through a questionnaire, interviews and document analysis. Case studies are normally associated with qualitative research, but can also be used as a method of inquiry employing a positivist epistemology and ontology. A total sample of 50 participants was chosen through a non-probability sampling technique. The major findings of the study reflected that there is a huge break in communication between government and the citizens in the locality while also establishing that the mechanisms currently being used were only as good as the factors influencing their implementation among other issues. Major recommendations included community engagement, capacity building and skills development, retention and expansion, lack of resources, promote individual independence of the community and the enhancement the Public Participation Unit.
- Full Text:
- Date Issued: 2015
An assessment of public accountability mechanisms towards eradicating corruption in the Eastern Cape
- Authors: Rulashe, Tando
- Date: 2015
- Subjects: Political corruption -- South Africa -- Eastern Cape Misconduct in office -- South Africa -- Eastern Cape Municipal government -- South Africa -- Eastern Cape , Local government -- South Africa -- Eastern Cape
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10353/1960 , vital:27588
- Description: The study critically examined the implementation of Public Accountability strategies and mechanisms: A case of Buffalo City Municipality. The problem statement gave emphases on the multiple cases drawn from stats reflected in domestic surveys that shows how corruption and maladministration have impacted the province negatively as well as the extreme poverty lines that dominate the communities in the republic and also the province. The New Public Management Theory was used to interpret the manner in which the participants were expected to give their views on leadership and accountability among others key issues. The objectives of the study were to; To assess the mechanisms implemented by Buffalo City Municipality., To explore the challenges affecting public accountability enforcement mechanisms in Buffalo City Municipality towards eradicating corruption, Determine the manner through which the Buffalo City Municipality can adopt tried and tested mechanism from Regional, national & international case studies on how to effective enforce public accountability for the sustainable management and curbing of corruption for effective and efficient service delivery and to recommend new mechanisms which Buffalo City Municipality can utilise in enforcing public accountability towards eradicating corruption in its institutions in order to encourage sustainable community development through service delivery. The study adopted a case study approach based on a mixed method paradigm where data was collected through a questionnaire, interviews and document analysis. Case studies are normally associated with qualitative research, but can also be used as a method of inquiry employing a positivist epistemology and ontology. A total sample of 50 participants was chosen through a non-probability sampling technique. The major findings of the study reflected that there is a huge break in communication between government and the citizens in the locality while also establishing that the mechanisms currently being used were only as good as the factors influencing their implementation among other issues. Major recommendations included community engagement, capacity building and skills development, retention and expansion, lack of resources, promote individual independence of the community and the enhancement the Public Participation Unit.
- Full Text:
- Date Issued: 2015
Capacity building for developmental local government in the Kicukiro District of Rwanda
- Authors: Rutebuka, Balinda
- Date: 2015
- Subjects: Sustainable development -- Rwanda , Economic development -- Rwanda , Local government -- Rwanda
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:8490 , http://hdl.handle.net/10948/d1020906
- Description: This study investigated the capacity building for developmental local government with reference to the Kicukiro District of Rwanda. Its aim was to examine the contribution of capacity-building interventions towards a developmental local government and at the same time investigate factors that hinder their implementation in Kicukiro district. The study provides an extensive historical background on local government in Rwa-nda with a particular focus on its policy, legal and institutional framework, whereby the developmental local government environment has been analysed. Furthermore, this study explores the theoretical framework of capacity building in general, and in this regard particular emphasis was given to capacity building in relation to developmental local government. The study also argued that without appropriate capacity it would be difficult for the district to fulfil its developmental mandate. This research followed both qualitative and quantitative approaches of study. It involved a survey in which a structured questionnaire and in-depth interviews were used as data gathering instruments. Through data analysis, findings of the study have shed light on the fact that capacity building constitutes an indispensable mechanism for local government to achieve its developmental mandate, despite challenges associated with the process of capacity building. The study found that the Kicukiro district has made a significant progress towards the implementation of capacity-building interventions despite the fact that these interventions are still fragmented, uncoordinated and still supply-driven. Furthermore, the study revealed that the capacities already built generated considerable impetus that contributed to socio-economic development within the Kicukiro district. The study also found that despite the progress made in both capacity building and development in Kicukiro district, there are capacity gaps and factors which are undermining further progress in this regard. Therefore, the study recommends, among others, an effective co-ordination of capacity-building interventions in order to avoid duplication and fragmentation of capacity-building efforts.
- Full Text:
- Date Issued: 2015
- Authors: Rutebuka, Balinda
- Date: 2015
- Subjects: Sustainable development -- Rwanda , Economic development -- Rwanda , Local government -- Rwanda
- Language: English
- Type: Thesis , Doctoral , DPhil
- Identifier: vital:8490 , http://hdl.handle.net/10948/d1020906
- Description: This study investigated the capacity building for developmental local government with reference to the Kicukiro District of Rwanda. Its aim was to examine the contribution of capacity-building interventions towards a developmental local government and at the same time investigate factors that hinder their implementation in Kicukiro district. The study provides an extensive historical background on local government in Rwa-nda with a particular focus on its policy, legal and institutional framework, whereby the developmental local government environment has been analysed. Furthermore, this study explores the theoretical framework of capacity building in general, and in this regard particular emphasis was given to capacity building in relation to developmental local government. The study also argued that without appropriate capacity it would be difficult for the district to fulfil its developmental mandate. This research followed both qualitative and quantitative approaches of study. It involved a survey in which a structured questionnaire and in-depth interviews were used as data gathering instruments. Through data analysis, findings of the study have shed light on the fact that capacity building constitutes an indispensable mechanism for local government to achieve its developmental mandate, despite challenges associated with the process of capacity building. The study found that the Kicukiro district has made a significant progress towards the implementation of capacity-building interventions despite the fact that these interventions are still fragmented, uncoordinated and still supply-driven. Furthermore, the study revealed that the capacities already built generated considerable impetus that contributed to socio-economic development within the Kicukiro district. The study also found that despite the progress made in both capacity building and development in Kicukiro district, there are capacity gaps and factors which are undermining further progress in this regard. Therefore, the study recommends, among others, an effective co-ordination of capacity-building interventions in order to avoid duplication and fragmentation of capacity-building efforts.
- Full Text:
- Date Issued: 2015