Development of graphene materials and phthalocyanines for application in dye-sensitized solar cells
- Authors: Chindeka, Francis
- Date: 2020
- Subjects: Dye-sensitized solar cells , Graphene , Phthalocyanines , Molecular orbitals , Impedance spectroscopy
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/166092 , vital:41328
- Description: Two sets of dye-sensitized solar cells (DSSCs) were fabricated. In the first set, dye-sensitized solar cells (DSSC) were fabricated by incorporating graphene materials as catalysts at the counter electrode. Platinum was also used as a catalyst for comparative purposes. Different phthalocyanines: hydroxyl indium tetracarboxyphenoxy phthalocyanine (1), chloro indium octacarboxy phthalocyanine (2) and dibenzoic acid silicon phthalocyanine (3) were used as dyes. Complex 3 gave the highest power conversion efficiency (η) of 3.19% when using nitrogen doped reduced graphene oxide nanosheets (NrGONS) as a catalyst at the counter electrode, and TiO2 containing rGONS at the anode. The value obtained is close to 3.8% obtained when using Pt catalyst instead of NrGONS at the cathode, thus confirming that NrGONS is a promising candidate to replace the more expensive Pt. The study also shows that placing rGONS on both the anode and cathode improves efficiency. In the second set, DSSCs were fabricated by using 2(3,5-biscarboxyphenoxy), 9(10), 16(17), 23(24)-tri(tertbutyl) phthalocyaninato Cu (4) and Zn (5) complexes as dyes on the ITO-TiO2 photoanodes containing reduced graphene oxide nanosheets (rGONS) or nitrogen-doped rGONS (NrGONS). The evaluation of the assembled DSSCs revealed that using ITO-TiO2-NrGONS-CuPc (4) photoanode had the highest fill factor (FF) and power conversion efficiency (ɳ) of 69 % and 4.36 % respectively. These results show that the asymmetrical phthalocyanine complexes (4) and (5) showed significant improvement on the performance of the DSSC compared to previous work on symmetrical carboxylated phthalocyanines with ɳ = 3.19%.
- Full Text:
- Date Issued: 2020
- Authors: Chindeka, Francis
- Date: 2020
- Subjects: Dye-sensitized solar cells , Graphene , Phthalocyanines , Molecular orbitals , Impedance spectroscopy
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/166092 , vital:41328
- Description: Two sets of dye-sensitized solar cells (DSSCs) were fabricated. In the first set, dye-sensitized solar cells (DSSC) were fabricated by incorporating graphene materials as catalysts at the counter electrode. Platinum was also used as a catalyst for comparative purposes. Different phthalocyanines: hydroxyl indium tetracarboxyphenoxy phthalocyanine (1), chloro indium octacarboxy phthalocyanine (2) and dibenzoic acid silicon phthalocyanine (3) were used as dyes. Complex 3 gave the highest power conversion efficiency (η) of 3.19% when using nitrogen doped reduced graphene oxide nanosheets (NrGONS) as a catalyst at the counter electrode, and TiO2 containing rGONS at the anode. The value obtained is close to 3.8% obtained when using Pt catalyst instead of NrGONS at the cathode, thus confirming that NrGONS is a promising candidate to replace the more expensive Pt. The study also shows that placing rGONS on both the anode and cathode improves efficiency. In the second set, DSSCs were fabricated by using 2(3,5-biscarboxyphenoxy), 9(10), 16(17), 23(24)-tri(tertbutyl) phthalocyaninato Cu (4) and Zn (5) complexes as dyes on the ITO-TiO2 photoanodes containing reduced graphene oxide nanosheets (rGONS) or nitrogen-doped rGONS (NrGONS). The evaluation of the assembled DSSCs revealed that using ITO-TiO2-NrGONS-CuPc (4) photoanode had the highest fill factor (FF) and power conversion efficiency (ɳ) of 69 % and 4.36 % respectively. These results show that the asymmetrical phthalocyanine complexes (4) and (5) showed significant improvement on the performance of the DSSC compared to previous work on symmetrical carboxylated phthalocyanines with ɳ = 3.19%.
- Full Text:
- Date Issued: 2020
Development of molecularly imprinted polymer based solid phase extraction sorbents for the selective cleanup of food and pharmaceutical residue samples
- Authors: Batlokwa, Bareki Shima
- Date: 2012
- Subjects: Sorbents -- Research Nanofibers -- Research Aflatoxins -- Research Electrospinning -- Research Extraction (Chemistry) -- Research
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4309 , http://hdl.handle.net/10962/d1004967
- Description: This thesis presents the development of chlorophyll, cholic acid, aflatoxin B1 molecularly imprinted polymer (MIP) particles and cholic acid MIP nanofibers for application as selective solid phase extraction (SPE) sorbents. The particles were prepared by bulk polymerization and the nanofibers by a novel approach combining molecular imprinting and electrospinning technology. The AFB1 MIP particles were compared with an aflatoxin specific immunoextraction sorbent in cleaning-up and pre-concentrating aflatoxins from nut extracts. They both recorded high extraction efficiencies (EEs) of > 97 % in selectively extracting the aflatoxins (AFB1, AFB2, AFG1 and AFG2). High reproducibility marked by the low %RSDs of < 1% and low LODs of ≤ 0.02 ng/g were calculated in all cases. The LODs were within the monitoring requirements of the European Commission. The results were validated with a peanut butter certified reference material. The chlorophyll MIP on the other hand selectively removed chlorophyll that would otherwise interfere during pesticide residue analysis (PRA) from > 0.6 to <0.09 Au in green plants extracts. The extracted chlorophyll was removed to far below the level of ≥ 0.399 Au that is usually associated with interference during PRA. Furthermore, the MIP demonstrated better selectivity by removing only chlorophyll (> 99%) in the presence of planar pesticides than the currently employed graphitized carbon black (GCB) that removed both the chlorophyll (> 88%) and planar pesticides (> 89%). For the interfering cholic acid during drug residue analysis, cholic acid MIP electrospun nanofibers demonstrated to be more sensitive and possessing higher loading capacity than the MIP particles. 100% cholic acid was removed by the nanofibers from standard solutions relative to 80% by the particles. This showed that the nanofibers have better performance than the micro particles and as such have potential to replace the particle based SPE sorbents that are currently in use. All the templates were optimally removed from the prepared MIPs by employing a novel pressurized hot water extraction template removal method that was used for the first time in this thesis. The method employed only water, an environmentally friendly solvent to remove templates to ≥ 99.6% with template residual bleeding of ≤ 0.02%.
- Full Text:
- Date Issued: 2012
- Authors: Batlokwa, Bareki Shima
- Date: 2012
- Subjects: Sorbents -- Research Nanofibers -- Research Aflatoxins -- Research Electrospinning -- Research Extraction (Chemistry) -- Research
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4309 , http://hdl.handle.net/10962/d1004967
- Description: This thesis presents the development of chlorophyll, cholic acid, aflatoxin B1 molecularly imprinted polymer (MIP) particles and cholic acid MIP nanofibers for application as selective solid phase extraction (SPE) sorbents. The particles were prepared by bulk polymerization and the nanofibers by a novel approach combining molecular imprinting and electrospinning technology. The AFB1 MIP particles were compared with an aflatoxin specific immunoextraction sorbent in cleaning-up and pre-concentrating aflatoxins from nut extracts. They both recorded high extraction efficiencies (EEs) of > 97 % in selectively extracting the aflatoxins (AFB1, AFB2, AFG1 and AFG2). High reproducibility marked by the low %RSDs of < 1% and low LODs of ≤ 0.02 ng/g were calculated in all cases. The LODs were within the monitoring requirements of the European Commission. The results were validated with a peanut butter certified reference material. The chlorophyll MIP on the other hand selectively removed chlorophyll that would otherwise interfere during pesticide residue analysis (PRA) from > 0.6 to <0.09 Au in green plants extracts. The extracted chlorophyll was removed to far below the level of ≥ 0.399 Au that is usually associated with interference during PRA. Furthermore, the MIP demonstrated better selectivity by removing only chlorophyll (> 99%) in the presence of planar pesticides than the currently employed graphitized carbon black (GCB) that removed both the chlorophyll (> 88%) and planar pesticides (> 89%). For the interfering cholic acid during drug residue analysis, cholic acid MIP electrospun nanofibers demonstrated to be more sensitive and possessing higher loading capacity than the MIP particles. 100% cholic acid was removed by the nanofibers from standard solutions relative to 80% by the particles. This showed that the nanofibers have better performance than the micro particles and as such have potential to replace the particle based SPE sorbents that are currently in use. All the templates were optimally removed from the prepared MIPs by employing a novel pressurized hot water extraction template removal method that was used for the first time in this thesis. The method employed only water, an environmentally friendly solvent to remove templates to ≥ 99.6% with template residual bleeding of ≤ 0.02%.
- Full Text:
- Date Issued: 2012
Development of nickel-selective molecularly imprinted polymers
- Tshikhudo, Tshinyadzo Robert
- Authors: Tshikhudo, Tshinyadzo Robert
- Date: 2002 , 2013-07-25
- Subjects: Imprinted polymers , Imprinted polymers -- Synthesis , Molecular imprinting , Nickel , Nickel -- Metallurgy
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4292 , http://hdl.handle.net/10962/d1004449 , Imprinted polymers , Imprinted polymers -- Synthesis , Molecular imprinting , Nickel , Nickel -- Metallurgy
- Description: A series of eight novel bidentate ligands, designed for use in the construction of nickel-selective molecularly imprinted polymers (MIP's), have been prepared. The synthetic pathway was established by retrosynthetic analysis of the target molecules to the readily available precursors, pyridine-2-carbaldehyde (or 6-methylpyridine-2-carbaldehyde) and ethyl bromoacetate. The ligands were designed to contain an allyl group for co-polymerisation and amine and pyridyl nitrogen donors, located to permit the formation of 5-membered nickel chelates. The eight novel ligands and their respective precursors were characterized by elemental (high-resolution MS) and spectroscopic (IR and ¹H and ¹³C NMR) analysis. High resolution electron-impact mass spectrometry has also been used, together with B/E linked scan data, to explore the fragmentation patterns of selected ligands. The various nickel(ll) complexes were analyzed using spectroscopic techniques and, in some cases, elemental analysis; computer modelling has also been used to explore conformational effects and complex stability. Numerous MIP's, containing nickel(II) complexes of the bidentate ligands, have been prepared, using ethylene glycol dimethylacrylate (EGDMA) as the cross-linker, azobis(isobutyronitrile) (AlBN) as the polymerization initiator and MeOH as the porogenic solvent. The template nickel(II) ions were leached out with conc. HCI, and the nickel(II) selectivity [in the presence of Fe(Ill)] of the nickel-imprinted polymers was examined by ICP-MS analysis. The ICP-MS data indicate that the MIP's examined exhibit extremely high selectivity for nickel over iron. , KMBT_363 , Adobe Acrobat 9.54 Paper Capture Plug-in
- Full Text:
- Date Issued: 2002
- Authors: Tshikhudo, Tshinyadzo Robert
- Date: 2002 , 2013-07-25
- Subjects: Imprinted polymers , Imprinted polymers -- Synthesis , Molecular imprinting , Nickel , Nickel -- Metallurgy
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4292 , http://hdl.handle.net/10962/d1004449 , Imprinted polymers , Imprinted polymers -- Synthesis , Molecular imprinting , Nickel , Nickel -- Metallurgy
- Description: A series of eight novel bidentate ligands, designed for use in the construction of nickel-selective molecularly imprinted polymers (MIP's), have been prepared. The synthetic pathway was established by retrosynthetic analysis of the target molecules to the readily available precursors, pyridine-2-carbaldehyde (or 6-methylpyridine-2-carbaldehyde) and ethyl bromoacetate. The ligands were designed to contain an allyl group for co-polymerisation and amine and pyridyl nitrogen donors, located to permit the formation of 5-membered nickel chelates. The eight novel ligands and their respective precursors were characterized by elemental (high-resolution MS) and spectroscopic (IR and ¹H and ¹³C NMR) analysis. High resolution electron-impact mass spectrometry has also been used, together with B/E linked scan data, to explore the fragmentation patterns of selected ligands. The various nickel(ll) complexes were analyzed using spectroscopic techniques and, in some cases, elemental analysis; computer modelling has also been used to explore conformational effects and complex stability. Numerous MIP's, containing nickel(II) complexes of the bidentate ligands, have been prepared, using ethylene glycol dimethylacrylate (EGDMA) as the cross-linker, azobis(isobutyronitrile) (AlBN) as the polymerization initiator and MeOH as the porogenic solvent. The template nickel(II) ions were leached out with conc. HCI, and the nickel(II) selectivity [in the presence of Fe(Ill)] of the nickel-imprinted polymers was examined by ICP-MS analysis. The ICP-MS data indicate that the MIP's examined exhibit extremely high selectivity for nickel over iron. , KMBT_363 , Adobe Acrobat 9.54 Paper Capture Plug-in
- Full Text:
- Date Issued: 2002
Development of styrene based imprinted sorbents for selective clean-up of metalloporphyrins in organic media
- Authors: Awokoya, Kehinde Nurudeen
- Date: 2014
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/54521 , vital:26580
- Description: Most crude oils contain traces of vanadium and nickel complex with porphyrins (VTPP and NTPP) within their asphaltene fraction. Although these metals are only present in trace quantities, they have a significant and detrimental impact on the refining process by degrading the quality of intermediate and end products. Therefore, their selective removal is highly desirable. This thesis presents the development of nickel porphyrin, nickel vanadyl porphyrin imprinted nanofibers and vanadyl porphyrin imprinted polymer (MIP) particles for application as selective sorbents. Computational model based on the combination of molecular dynamics simulations and quantum mechanics was successfully applied to the styrene functional monomer selection. The particle was prepared by bulk polymerization and the nanofibers by a novel approach combining molecular imprinting and electrospinning technology. The morphologies, thermal stabilities and porosities of the imprinted sorbents were studied using SEM, TGA, and BET nitrogen gas adsorption. Chloroform was found to swell the polymer particles to a higher degree than methanol and acetonitrile. The adsorption characteristics of the imprinted sorbents best fitted with Freundlich isotherm model. The imprinted sorbents recorded high extraction efficiencies (EEs) of > 99 % in selectively extracting the metalloporphyrins. The impact of the template on the affinity of recognition for NTPP was evaluated. The results showed that the NTPP adsorption capacity increased as the molar ratio of NTPP to styrene was increased from 1:1 to 3:1. The optimal ratio of template to functional monomer which yielded the best specific affinity and highest recovery (99.9 %) was 3:1. The effects of trifluoroacetic acid (TFA), dichloromethane (DCM), dimethyl sulphoxide (DMSO), pentane (PEN) on electro-spinnability of the polymer solutions and the morphological appearance of the nanofibers were investigated. The imprinted nanofibers exhibited the same selectivity specialism for both NTPP and VTPP. A remarkable stability in relation to reusability was observed when imprinted nanofibers were used, as they could be reused nine times without incurring any significant loss in removal efficiency. The results were validated by analysing a certified reference material. The imprinted sorbents were therefore found to be selective sorbents that are well suited for handling trace metals in organic media.
- Full Text:
- Date Issued: 2014
- Authors: Awokoya, Kehinde Nurudeen
- Date: 2014
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/54521 , vital:26580
- Description: Most crude oils contain traces of vanadium and nickel complex with porphyrins (VTPP and NTPP) within their asphaltene fraction. Although these metals are only present in trace quantities, they have a significant and detrimental impact on the refining process by degrading the quality of intermediate and end products. Therefore, their selective removal is highly desirable. This thesis presents the development of nickel porphyrin, nickel vanadyl porphyrin imprinted nanofibers and vanadyl porphyrin imprinted polymer (MIP) particles for application as selective sorbents. Computational model based on the combination of molecular dynamics simulations and quantum mechanics was successfully applied to the styrene functional monomer selection. The particle was prepared by bulk polymerization and the nanofibers by a novel approach combining molecular imprinting and electrospinning technology. The morphologies, thermal stabilities and porosities of the imprinted sorbents were studied using SEM, TGA, and BET nitrogen gas adsorption. Chloroform was found to swell the polymer particles to a higher degree than methanol and acetonitrile. The adsorption characteristics of the imprinted sorbents best fitted with Freundlich isotherm model. The imprinted sorbents recorded high extraction efficiencies (EEs) of > 99 % in selectively extracting the metalloporphyrins. The impact of the template on the affinity of recognition for NTPP was evaluated. The results showed that the NTPP adsorption capacity increased as the molar ratio of NTPP to styrene was increased from 1:1 to 3:1. The optimal ratio of template to functional monomer which yielded the best specific affinity and highest recovery (99.9 %) was 3:1. The effects of trifluoroacetic acid (TFA), dichloromethane (DCM), dimethyl sulphoxide (DMSO), pentane (PEN) on electro-spinnability of the polymer solutions and the morphological appearance of the nanofibers were investigated. The imprinted nanofibers exhibited the same selectivity specialism for both NTPP and VTPP. A remarkable stability in relation to reusability was observed when imprinted nanofibers were used, as they could be reused nine times without incurring any significant loss in removal efficiency. The results were validated by analysing a certified reference material. The imprinted sorbents were therefore found to be selective sorbents that are well suited for handling trace metals in organic media.
- Full Text:
- Date Issued: 2014
Donor-acceptor effects on the optical limiting properties of BODIPY dyes
- Authors: Hlatshwayo, Zweli Thabiso
- Date: 2018
- Subjects: Dyes and dyeing -- Chemistry , Photosensitizing compounds -- Therapeutic use , Cancer -- Photochemotherapy , Upconversion nanoparticles (UCNPs)
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/63368 , vital:28397
- Description: The main objectives of the research described in this thesis were firstly to synthesize and characterize a series of structurally related BODIPY dyes that are potentially suitable for use in applications, secondly to conjugate a carboxylic acid substituted BODIPY dye to amine-functionalized upconversion nanoparticles (UCNPs) through an amide bond to enable singlet oxygen production upon irradiation at 978 nm in the biological window for tissue penetration for biomedical applications, and thirdly to compare the nonlinear optical (NLO) properties of various BODIPY dyes to determine whether push-pull effects enhance their utility for optical limiting (OL) applications. Halogenated BODIPY cores with high singlet oxygen quantum yields were prepared, which absorb in the green portion of the visible region and making it difficult to treat deeper skin tumors in the context of photodynamic therapy (PDT) applications. UCNPs generally absorb in the near-infrared (NIR) region (978 nm), and this is advantageous because, this is where absorption by water, cells and tissues is minimized. NaYF4: Yb/Er/Gd UCNPs were synthesized, amine functionalized and successfully conjugated to a halogenated carboxylic acid functionalized BODIPY. This allowed for favorable Förster resonance energy transfer (FRET) since one of the emission wavelengths of the NaYF4: Yb/Er/Gd UCNPs overlaps with the main absorption band of the BODIPY at 540 nm. The conjugate was irradiated at 978 nm, but instability of the BODIPY dye was observed, which made singlet oxygen quantum yield determination impossible. An enhanced singlet oxygen quantum yield value was observed upon irradiation of the conjugate at 540 nm, suggesting that further studies of this system are warranted. The OL properties of BODIPY cores and dyes, which are π-extended at the 3,5-positions with styryl groups, were studied in a series of different organic solvents at 532 nm by using the z-scan technique on a nanosecond timescale. Many of the dyes were used to compare the effects of introducing electron donor and acceptor groups on the OL properties of the dyes. The dipole moments of these dyes were found to correlate with the OL response. The OL results indicate that BODIPY dyes with push-pull properties, which are π-extended at the 3,5-positions with styryl groups, can be considered as viable candidates for use in OL applications. The studies sought to establish the effect of ESA in the triplet manifold as compared to the singlet manifold in as far as the OL response is concerned. The most promising dyes were embedded in polystyrene thin films, and this was found to significantly enhance their OL properties.
- Full Text:
- Date Issued: 2018
- Authors: Hlatshwayo, Zweli Thabiso
- Date: 2018
- Subjects: Dyes and dyeing -- Chemistry , Photosensitizing compounds -- Therapeutic use , Cancer -- Photochemotherapy , Upconversion nanoparticles (UCNPs)
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/63368 , vital:28397
- Description: The main objectives of the research described in this thesis were firstly to synthesize and characterize a series of structurally related BODIPY dyes that are potentially suitable for use in applications, secondly to conjugate a carboxylic acid substituted BODIPY dye to amine-functionalized upconversion nanoparticles (UCNPs) through an amide bond to enable singlet oxygen production upon irradiation at 978 nm in the biological window for tissue penetration for biomedical applications, and thirdly to compare the nonlinear optical (NLO) properties of various BODIPY dyes to determine whether push-pull effects enhance their utility for optical limiting (OL) applications. Halogenated BODIPY cores with high singlet oxygen quantum yields were prepared, which absorb in the green portion of the visible region and making it difficult to treat deeper skin tumors in the context of photodynamic therapy (PDT) applications. UCNPs generally absorb in the near-infrared (NIR) region (978 nm), and this is advantageous because, this is where absorption by water, cells and tissues is minimized. NaYF4: Yb/Er/Gd UCNPs were synthesized, amine functionalized and successfully conjugated to a halogenated carboxylic acid functionalized BODIPY. This allowed for favorable Förster resonance energy transfer (FRET) since one of the emission wavelengths of the NaYF4: Yb/Er/Gd UCNPs overlaps with the main absorption band of the BODIPY at 540 nm. The conjugate was irradiated at 978 nm, but instability of the BODIPY dye was observed, which made singlet oxygen quantum yield determination impossible. An enhanced singlet oxygen quantum yield value was observed upon irradiation of the conjugate at 540 nm, suggesting that further studies of this system are warranted. The OL properties of BODIPY cores and dyes, which are π-extended at the 3,5-positions with styryl groups, were studied in a series of different organic solvents at 532 nm by using the z-scan technique on a nanosecond timescale. Many of the dyes were used to compare the effects of introducing electron donor and acceptor groups on the OL properties of the dyes. The dipole moments of these dyes were found to correlate with the OL response. The OL results indicate that BODIPY dyes with push-pull properties, which are π-extended at the 3,5-positions with styryl groups, can be considered as viable candidates for use in OL applications. The studies sought to establish the effect of ESA in the triplet manifold as compared to the singlet manifold in as far as the OL response is concerned. The most promising dyes were embedded in polystyrene thin films, and this was found to significantly enhance their OL properties.
- Full Text:
- Date Issued: 2018
Dual and targeted photodynamic therapy ablation of bacterial and cancer cells using phthalocyanines and porphyrins in the presence of carbon-based nanomaterials
- Authors: Openda, Yolande Ikala
- Date: 2022-10-14
- Subjects: Uncatalogued
- Language: English
- Type: Academic theses , Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/365945 , vital:65804 , DOI https://doi.org/10.21504/10962//365946
- Description: Phthalocyanines (Pcs) and porphyrins bearing substituents that possess antibacterial/anticancer properties are used as photosensitizers (PS) for the first time in the work. For targeting specificity and improved photoactivity, the PSs were afterward functionalized with carbon nanomaterials such as graphene quantum dots (GQDs) and detonation nanodiamonds (DNDs) via covalent conjugation (amide or ester bonds) or by non-covalent conjugation (π-π stacking and electrostatic interactions). Furthermore, the PSs-DNDs nanoconjugates were conjugated to either chitosan-capped silver nanoparticles (CSAg) via amide bonds or to the bare silver nanoparticles (Ag NPs) using the silver- nitrogen affinity. The as-synthesized nanoconjugates were also fully characterized by spectroscopic and microscopic methods together with thermal analysis. The potential photocytotoxicity of the complexes alone and their nanoconjugates against S. aureus and/or E. coli planktonic and biofilm cultures has been evaluated in vitro. Compared to the non- quaternized PSs, the cationic analogs exhibited a higher photodynamic inactivation against the planktonic cells with log10 reduction values above 9 in the viable count using a concentration of ca. 1.25 μM following 30 min exposure to light (Light dose: 943 J/cm2 for Pcs and 250 mW/cm2 for porphyrins). Whereas, at a concentration of ca. 100 μM the cationic PSs showed complete eradication of biofilms upon 30 min exposure to light. As a result of conjugation to carbon-based nanomaterials and silver nanoparticles, the compounds proved to be more effective as they exhibited stronger antibacterial and anti-biofilm activities on the multi-drug resistant bacteria strains due to synergetic effect, compared to PSs alone. This suggests that the newly prepared nanohybrids (PS concentration ca. 100 μM) could be used as potential antimicrobial agents in the treatment of biofilm-related infections. The target nanoconjugates showed all the advantages of two different groups existing on a single entity. In light of the potential advantages of combined chemotherapy and photodynamic antimicrobial chemotherapy (PACT), this work reports for the first time the use of PACT-ciprofloxacin (CIP) dual therapy using selected indium quaternized PSs which showed higher photoactivity with complete eradication of both Gram-positive and Gram-negative bacteria biofilms at concentrations of 8 μM of PS versus 2 μg/mL of the antibiotic following 15 min irradiation time (light dose: 471 J/cm2 for Pcs and fluence: 250 mW/cm2 for porphyrins) on S. aureus. Whereas the total killing of E. coli was obtained when combining 8 or 16 μM of PS combined with 4 μg/mL of CIP. The combined treatment resulted in the complete eradication of the matured biofilms with the highest log10 reduction values of 7.05 and 7.20 on S. aureus and E. coli, respectively. Used as a model, positively charged dimethylamino-chalcone Pcs also exhibited interesting photodynamic therapy (PDT) activity against MCF-7 cancer cells giving IC50 values of 17.9 and 7.4 μM, respectively following 15 min irradiation. Additionally, the TD-B3LYP/LanL2DZ calculations were run on the dimethylaminophenyl- porphyrins to compare the singlet excitation energies of quaternized and non-quaternized porphyrins in vacuo. the study shows excellent agreement between time-dependent density- functional theory (TD-DFT) exciting energies and the experimental S1>S0 excitation energies. The small deviation observed between the calculated and experimental spectra arises from the solvent effect. The excitation energies observed in these UV-Vis spectra mostly originated from electron promotion between the highest occupied molecular orbital (HOMO) for the less intense band and the HOMO-1 for the most intense band of the ground states to the lower unoccupied molecular orbital (LUMO) of the excited states. , Thesis (PhD) -- Faculty of Science, Chemistry, 2022
- Full Text:
- Date Issued: 2022-10-14
- Authors: Openda, Yolande Ikala
- Date: 2022-10-14
- Subjects: Uncatalogued
- Language: English
- Type: Academic theses , Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/365945 , vital:65804 , DOI https://doi.org/10.21504/10962//365946
- Description: Phthalocyanines (Pcs) and porphyrins bearing substituents that possess antibacterial/anticancer properties are used as photosensitizers (PS) for the first time in the work. For targeting specificity and improved photoactivity, the PSs were afterward functionalized with carbon nanomaterials such as graphene quantum dots (GQDs) and detonation nanodiamonds (DNDs) via covalent conjugation (amide or ester bonds) or by non-covalent conjugation (π-π stacking and electrostatic interactions). Furthermore, the PSs-DNDs nanoconjugates were conjugated to either chitosan-capped silver nanoparticles (CSAg) via amide bonds or to the bare silver nanoparticles (Ag NPs) using the silver- nitrogen affinity. The as-synthesized nanoconjugates were also fully characterized by spectroscopic and microscopic methods together with thermal analysis. The potential photocytotoxicity of the complexes alone and their nanoconjugates against S. aureus and/or E. coli planktonic and biofilm cultures has been evaluated in vitro. Compared to the non- quaternized PSs, the cationic analogs exhibited a higher photodynamic inactivation against the planktonic cells with log10 reduction values above 9 in the viable count using a concentration of ca. 1.25 μM following 30 min exposure to light (Light dose: 943 J/cm2 for Pcs and 250 mW/cm2 for porphyrins). Whereas, at a concentration of ca. 100 μM the cationic PSs showed complete eradication of biofilms upon 30 min exposure to light. As a result of conjugation to carbon-based nanomaterials and silver nanoparticles, the compounds proved to be more effective as they exhibited stronger antibacterial and anti-biofilm activities on the multi-drug resistant bacteria strains due to synergetic effect, compared to PSs alone. This suggests that the newly prepared nanohybrids (PS concentration ca. 100 μM) could be used as potential antimicrobial agents in the treatment of biofilm-related infections. The target nanoconjugates showed all the advantages of two different groups existing on a single entity. In light of the potential advantages of combined chemotherapy and photodynamic antimicrobial chemotherapy (PACT), this work reports for the first time the use of PACT-ciprofloxacin (CIP) dual therapy using selected indium quaternized PSs which showed higher photoactivity with complete eradication of both Gram-positive and Gram-negative bacteria biofilms at concentrations of 8 μM of PS versus 2 μg/mL of the antibiotic following 15 min irradiation time (light dose: 471 J/cm2 for Pcs and fluence: 250 mW/cm2 for porphyrins) on S. aureus. Whereas the total killing of E. coli was obtained when combining 8 or 16 μM of PS combined with 4 μg/mL of CIP. The combined treatment resulted in the complete eradication of the matured biofilms with the highest log10 reduction values of 7.05 and 7.20 on S. aureus and E. coli, respectively. Used as a model, positively charged dimethylamino-chalcone Pcs also exhibited interesting photodynamic therapy (PDT) activity against MCF-7 cancer cells giving IC50 values of 17.9 and 7.4 μM, respectively following 15 min irradiation. Additionally, the TD-B3LYP/LanL2DZ calculations were run on the dimethylaminophenyl- porphyrins to compare the singlet excitation energies of quaternized and non-quaternized porphyrins in vacuo. the study shows excellent agreement between time-dependent density- functional theory (TD-DFT) exciting energies and the experimental S1>S0 excitation energies. The small deviation observed between the calculated and experimental spectra arises from the solvent effect. The excitation energies observed in these UV-Vis spectra mostly originated from electron promotion between the highest occupied molecular orbital (HOMO) for the less intense band and the HOMO-1 for the most intense band of the ground states to the lower unoccupied molecular orbital (LUMO) of the excited states. , Thesis (PhD) -- Faculty of Science, Chemistry, 2022
- Full Text:
- Date Issued: 2022-10-14
Echogenic liposomes for ultrasound-triggered drug delivery
- Authors: Izuchukwu, Ezekiel Charles
- Date: 2021-10
- Subjects: Liposomes , Drug delivery systems , Colon (Anatomy) Cancer Treatment , Transmission electron microscopy , Fourier transform infrared spectroscopy , Liquid chromatography , Echogenic liposomes , Ultrasound-triggered drug delivery
- Language: English
- Type: Masters theses , text
- Identifier: http://hdl.handle.net/10962/188997 , vital:44805
- Description: Colorectal cancer is one of common cancers worldwide. It is the third most diagnosed cancer and the second leading cause of death. The use of 5-fluorouracil (5-FU) alone or in a chemotherapy regime has been the effective treatment of colorectal cancer patients. The efficacy of 5-FU in colorectal cancer treatment is significantly limited by drug resistance, gastrointestinal, and bone marrow toxicity through high-level expression of thymidylate synthase, justifying a need to improve its therapeutic index. Liposomes are colloidal membranes comprising of one or more lipid bilayers enclosing an aqueous core. They have been used to improve the therapeutic index of many anti-cancer drugs by changing drug absorption, elongating biological half-life, reducing metabolism, and reducing toxicity to healthy tissues. Echogenic liposomes are specifically designed to respond to external triggering like ultrasound stimulation by entrapping a gas or an emulsion that can vaporize. A liposome's unique property is that it can entrap both hydrophobic and hydrophilic substances simultaneously in the lipid bilayer and the aqueous core, respectively. These stimuli-responsive liposomes can be triggered externally with ultrasound, to release the chemotherapeutic cargo only at the required site. This research aims to formulate echogenic liposomes encapsulating 5-FU for potential ultrasound triggered release (echogenic). Liposome formulations wereprepared with lipid composition of crude soybean lecithin and cholesterol by thin-filmhydration method and the drug was passively loaded in the formulation. The 5-FU loadedliposomes were evaluated by dynamic light scattering (DLS) for particle size, polydispersityindex, and zeta potential and transmission electron microscopy (TEM) for morphology.Encapsulated liposomal formulations were also evaluated using physicochemical techniquesincluding thermogravimetric analysis (TGA), differential scanning calorimetry (DSC),Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). Theencapsulation efficiency and release kinetics were studied using a validated high-performanceliquid chromatography (HPLC) method. Echogenic properties were explored by entrapping abiocompatible gas (argon) at the same time as the drug (5-FU) using a pressure/freezemethodology. The liposomal formulations were typically spherical with a size of about 150 nmand encapsulation efficiency of 62%. Low-frequency ultrasound (20 kHz) was used to triggerthe drug release from the complete formulation at 10%, 15%, and 20% amplitude and exposuretime of 5 min and 10 min. The rate of drug release from the nano-carrier was a function of theultrasound amplitude and exposure time and reached a maximum of 65% release under theconditions investigated. The cumulative release was investigated, with and without theapplication of ultrasound. It was demonstrated that the application of ultrasound resulted in complete release (99%) after 12 h while this dropped to 70% without ultrasound. These results are encouraging for optimizing ultrasound parameters for triggered and controlled release of the 5-FU, for conditions such as the management of cancer where low-power ultrasound can be applied. , Thesis (MSc) -- Faculty of Science, Chemistry, 2021
- Full Text:
- Date Issued: 2021-10
- Authors: Izuchukwu, Ezekiel Charles
- Date: 2021-10
- Subjects: Liposomes , Drug delivery systems , Colon (Anatomy) Cancer Treatment , Transmission electron microscopy , Fourier transform infrared spectroscopy , Liquid chromatography , Echogenic liposomes , Ultrasound-triggered drug delivery
- Language: English
- Type: Masters theses , text
- Identifier: http://hdl.handle.net/10962/188997 , vital:44805
- Description: Colorectal cancer is one of common cancers worldwide. It is the third most diagnosed cancer and the second leading cause of death. The use of 5-fluorouracil (5-FU) alone or in a chemotherapy regime has been the effective treatment of colorectal cancer patients. The efficacy of 5-FU in colorectal cancer treatment is significantly limited by drug resistance, gastrointestinal, and bone marrow toxicity through high-level expression of thymidylate synthase, justifying a need to improve its therapeutic index. Liposomes are colloidal membranes comprising of one or more lipid bilayers enclosing an aqueous core. They have been used to improve the therapeutic index of many anti-cancer drugs by changing drug absorption, elongating biological half-life, reducing metabolism, and reducing toxicity to healthy tissues. Echogenic liposomes are specifically designed to respond to external triggering like ultrasound stimulation by entrapping a gas or an emulsion that can vaporize. A liposome's unique property is that it can entrap both hydrophobic and hydrophilic substances simultaneously in the lipid bilayer and the aqueous core, respectively. These stimuli-responsive liposomes can be triggered externally with ultrasound, to release the chemotherapeutic cargo only at the required site. This research aims to formulate echogenic liposomes encapsulating 5-FU for potential ultrasound triggered release (echogenic). Liposome formulations wereprepared with lipid composition of crude soybean lecithin and cholesterol by thin-filmhydration method and the drug was passively loaded in the formulation. The 5-FU loadedliposomes were evaluated by dynamic light scattering (DLS) for particle size, polydispersityindex, and zeta potential and transmission electron microscopy (TEM) for morphology.Encapsulated liposomal formulations were also evaluated using physicochemical techniquesincluding thermogravimetric analysis (TGA), differential scanning calorimetry (DSC),Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). Theencapsulation efficiency and release kinetics were studied using a validated high-performanceliquid chromatography (HPLC) method. Echogenic properties were explored by entrapping abiocompatible gas (argon) at the same time as the drug (5-FU) using a pressure/freezemethodology. The liposomal formulations were typically spherical with a size of about 150 nmand encapsulation efficiency of 62%. Low-frequency ultrasound (20 kHz) was used to triggerthe drug release from the complete formulation at 10%, 15%, and 20% amplitude and exposuretime of 5 min and 10 min. The rate of drug release from the nano-carrier was a function of theultrasound amplitude and exposure time and reached a maximum of 65% release under theconditions investigated. The cumulative release was investigated, with and without theapplication of ultrasound. It was demonstrated that the application of ultrasound resulted in complete release (99%) after 12 h while this dropped to 70% without ultrasound. These results are encouraging for optimizing ultrasound parameters for triggered and controlled release of the 5-FU, for conditions such as the management of cancer where low-power ultrasound can be applied. , Thesis (MSc) -- Faculty of Science, Chemistry, 2021
- Full Text:
- Date Issued: 2021-10
Effect of nanoparticles on the photophysicochemical behaviour of metallophthalocyanines
- Moeno, Sharon Keitumetse Gail Mpheletso
- Authors: Moeno, Sharon Keitumetse Gail Mpheletso
- Date: 2011 , 2011-03-30
- Subjects: Phthalocyanines Nanoparticles Photochemistry Quantum dots
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4310 , http://hdl.handle.net/10962/d1004968
- Description: The synthesis, spectroscopic characterization, and studies of the photophysicochemical behaviour of selective anionic, cationic and neutral metallophthallocyanine (MPc) complexes were carried out and the results are presented herein. Studies on the effect of the central metal ion, the solvent used and the presence of nanoparticles on the photophysicochemical properties were conducted. The findings showed that the photophysicochemical parameters were mostly enhanced in the presence of central metal ions of high atomic numbers and also in the presence of nanoparticles. It was also observed that solvents that encouraged the monomericity of the MPc complexes also lead to improved photophysical and photochemical behaviour. CdTe quantum dots (QDs) stabilized with mercaptocarbonic acids were also observed to cause stimulated emission of the MPcs through Förster resonance energy transfer (FRET) thus acting as energy donors while the respective MPc acted as energy acceptors in all the FRET studies. FRET was observed following the photoexcitation of QDs for all monomeric anionic MPcs but it was also shown to occur for some cationic MPcs in organic media. Both the substituent and solvent used were found to exert a strong influence on the occurrence of FRET. Other cationic MPcs however showed different behaviour in the presence of the meraptocarbonic stabilized CdTe QDs; with the cationic porphyrazine giving clear indications of Pc ring reduction. The rest of the cationic MPcs did not give clear evidence of Pc ring reduction, instead they showed signs of aggregate formation possibly from the assembly of electrostatic ion pair complexes which could result in reduction of the quaternized pyridinium ring of the substituent. Both the QDs and the MPc complex emission spectra were significantly quenched for each in the presence of the other. Stern-Volmer quenching studies indicated that both static and dynamic quenching of the QDs in the presence of MPcs took place. The fluorescence lifetimes of the mercaptopropionic acid (MPA) capped CdTe QDs in the presence of various MPc complexes showed quenching of mostly the longer lifetimes of the QDs in the presence of MPcs suggesting that the surface defects and states are involved in the interaction of the QDs and MPcs. An MPc complex terminating in thio tethers was employed in the conjugation to AuNPs. Spectroscopic and microscopic studies confirmed the formation of the MPc-AuNP conjugate which was also shown to exhibit improved photophysicochemical properties compared to the free MPc.
- Full Text:
- Date Issued: 2011
- Authors: Moeno, Sharon Keitumetse Gail Mpheletso
- Date: 2011 , 2011-03-30
- Subjects: Phthalocyanines Nanoparticles Photochemistry Quantum dots
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4310 , http://hdl.handle.net/10962/d1004968
- Description: The synthesis, spectroscopic characterization, and studies of the photophysicochemical behaviour of selective anionic, cationic and neutral metallophthallocyanine (MPc) complexes were carried out and the results are presented herein. Studies on the effect of the central metal ion, the solvent used and the presence of nanoparticles on the photophysicochemical properties were conducted. The findings showed that the photophysicochemical parameters were mostly enhanced in the presence of central metal ions of high atomic numbers and also in the presence of nanoparticles. It was also observed that solvents that encouraged the monomericity of the MPc complexes also lead to improved photophysical and photochemical behaviour. CdTe quantum dots (QDs) stabilized with mercaptocarbonic acids were also observed to cause stimulated emission of the MPcs through Förster resonance energy transfer (FRET) thus acting as energy donors while the respective MPc acted as energy acceptors in all the FRET studies. FRET was observed following the photoexcitation of QDs for all monomeric anionic MPcs but it was also shown to occur for some cationic MPcs in organic media. Both the substituent and solvent used were found to exert a strong influence on the occurrence of FRET. Other cationic MPcs however showed different behaviour in the presence of the meraptocarbonic stabilized CdTe QDs; with the cationic porphyrazine giving clear indications of Pc ring reduction. The rest of the cationic MPcs did not give clear evidence of Pc ring reduction, instead they showed signs of aggregate formation possibly from the assembly of electrostatic ion pair complexes which could result in reduction of the quaternized pyridinium ring of the substituent. Both the QDs and the MPc complex emission spectra were significantly quenched for each in the presence of the other. Stern-Volmer quenching studies indicated that both static and dynamic quenching of the QDs in the presence of MPcs took place. The fluorescence lifetimes of the mercaptopropionic acid (MPA) capped CdTe QDs in the presence of various MPc complexes showed quenching of mostly the longer lifetimes of the QDs in the presence of MPcs suggesting that the surface defects and states are involved in the interaction of the QDs and MPcs. An MPc complex terminating in thio tethers was employed in the conjugation to AuNPs. Spectroscopic and microscopic studies confirmed the formation of the MPc-AuNP conjugate which was also shown to exhibit improved photophysicochemical properties compared to the free MPc.
- Full Text:
- Date Issued: 2011
Effect of substituents on the photophysical properties and nonlinear optical properties of asymmetrical zinc(II) phthalocyanine when conjugated to semiconductor quantum dots
- Authors: Mgidlana, Sithi
- Date: 2019
- Subjects: Nonlinear optics , Quantum dots , Phthalocyanines , Zinc
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/97152 , vital:31404
- Description: Various characterization techniques have been used to characterize the synthesized asymmetrical zinc phthalocyanines (ZnPc) derivatives. Techniques include Ultraviolet-visible (UV-vis) spectrophotometry, matrix assisted laser desorption time of flight mass spectrometry (MALD-TOF MS), proton nuclear magnetic resonance (1H-NMR), elemental analysis and Fourier-transform infra-red spectroscopy (FT-IR). The complexes are covalently linked to core/shell and core/shell/shell semiconductor quantum dots (SQDs) via amide bond formation. Photophysical properties of complexes improved in the presence of semiconductor quantum dots (SQDs). SQDs contain cadmium/telluride (CdTe) as core, coated in the first shell with zinc selenide (ZnSe) or zinc sulfide (ZnS) and with zinc oxide (ZnO) in second shell. The photophysical properties of the phthalocyanine (Pc) complexes and their conjugates with SQDs are investigated in solution. Triplet quantum yields of complexes improved in the presence of semiconductor quantum dots. The optical limiting behaviour of the Pc complexes and conjugates are assessed using the open aperture Z–scan technique at laser excitation wavelength of 532 nm with 10 ns pulse. Pcs complexes showed good nonlinear optical response with higher nonlinear absorption coefficient. The conjugates afforded higher nonlinear absorption coefficient than Pc complexes alone.
- Full Text:
- Date Issued: 2019
- Authors: Mgidlana, Sithi
- Date: 2019
- Subjects: Nonlinear optics , Quantum dots , Phthalocyanines , Zinc
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/97152 , vital:31404
- Description: Various characterization techniques have been used to characterize the synthesized asymmetrical zinc phthalocyanines (ZnPc) derivatives. Techniques include Ultraviolet-visible (UV-vis) spectrophotometry, matrix assisted laser desorption time of flight mass spectrometry (MALD-TOF MS), proton nuclear magnetic resonance (1H-NMR), elemental analysis and Fourier-transform infra-red spectroscopy (FT-IR). The complexes are covalently linked to core/shell and core/shell/shell semiconductor quantum dots (SQDs) via amide bond formation. Photophysical properties of complexes improved in the presence of semiconductor quantum dots (SQDs). SQDs contain cadmium/telluride (CdTe) as core, coated in the first shell with zinc selenide (ZnSe) or zinc sulfide (ZnS) and with zinc oxide (ZnO) in second shell. The photophysical properties of the phthalocyanine (Pc) complexes and their conjugates with SQDs are investigated in solution. Triplet quantum yields of complexes improved in the presence of semiconductor quantum dots. The optical limiting behaviour of the Pc complexes and conjugates are assessed using the open aperture Z–scan technique at laser excitation wavelength of 532 nm with 10 ns pulse. Pcs complexes showed good nonlinear optical response with higher nonlinear absorption coefficient. The conjugates afforded higher nonlinear absorption coefficient than Pc complexes alone.
- Full Text:
- Date Issued: 2019
Effect of the nature of nanoparticles on the photophysicochemical properties and photodynamic antimicrobial chemotherapy of phthalocyanines
- Authors: Magadla, Aviwe
- Date: 2020
- Subjects: Nanoparticles , Phthalocyanines , Anti-infective agents -- Therapeutic use , Photochemotherapy , Photochemistry
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/123107 , vital:35406
- Description: In this work, the syntheses and characterisation of Zn monocaffeic acid tri–tert–butyl phthalocyanine (1), Zn monocarboxyphenoxy tri– tert–butylphenoxyl phthalocyanine (2), tetrakis phenoxy N,N-dimethyl-4-(methylimino) phthalocyanine indium (III) chloride (3) and tetrakis N,N-dimethyl-4-(methylimino) phthalocyanine indium (III) chloride (5) are presented. Complexes 3 and 5 were further quartenised with 1,3- propanesultone to form corresponding complexes (4) and (6), respectively. Complexes 1 and 2 were covalently linked to amino functionalised nanoparticles (NPs). Complexes 3, 4, 5 and 6 where linked to oleic acid/oleylamine capped (OLA/OLM) silver-iron dimers (Ag-Fe3O4 OLA/OLM) and silver-iron core shell (Ag@Fe3O4 OLA/OLM) NPs via interaction between the nanoparticles and the imino group on the phthalocyanines. The phthalocyanine-NP conjugates afforded an increase in triplet quantum yields with a corresponding decrease in fluorescence quantum yield as compared to the phthalocyanine complexes alone. Complexes 3, 4 and their conjugates were then used for photodynamic antimicrobial chemotherapy on E. coli. The zwitterionic photosensitiser 4 and its conjugates showed better efficiency for photodynamic antimicrobial chemotherapy compared to their neutral counterparts.
- Full Text:
- Date Issued: 2020
- Authors: Magadla, Aviwe
- Date: 2020
- Subjects: Nanoparticles , Phthalocyanines , Anti-infective agents -- Therapeutic use , Photochemotherapy , Photochemistry
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/123107 , vital:35406
- Description: In this work, the syntheses and characterisation of Zn monocaffeic acid tri–tert–butyl phthalocyanine (1), Zn monocarboxyphenoxy tri– tert–butylphenoxyl phthalocyanine (2), tetrakis phenoxy N,N-dimethyl-4-(methylimino) phthalocyanine indium (III) chloride (3) and tetrakis N,N-dimethyl-4-(methylimino) phthalocyanine indium (III) chloride (5) are presented. Complexes 3 and 5 were further quartenised with 1,3- propanesultone to form corresponding complexes (4) and (6), respectively. Complexes 1 and 2 were covalently linked to amino functionalised nanoparticles (NPs). Complexes 3, 4, 5 and 6 where linked to oleic acid/oleylamine capped (OLA/OLM) silver-iron dimers (Ag-Fe3O4 OLA/OLM) and silver-iron core shell (Ag@Fe3O4 OLA/OLM) NPs via interaction between the nanoparticles and the imino group on the phthalocyanines. The phthalocyanine-NP conjugates afforded an increase in triplet quantum yields with a corresponding decrease in fluorescence quantum yield as compared to the phthalocyanine complexes alone. Complexes 3, 4 and their conjugates were then used for photodynamic antimicrobial chemotherapy on E. coli. The zwitterionic photosensitiser 4 and its conjugates showed better efficiency for photodynamic antimicrobial chemotherapy compared to their neutral counterparts.
- Full Text:
- Date Issued: 2020
Effects of Axial Ligands on the Photosensitising Properties of Silicon Octaphenoxyphthalocyanines
- Authors: Maree, Machiel David
- Date: 2002
- Subjects: Ligands , Photochemotherapy , Phthalocyanines
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4553 , http://hdl.handle.net/10962/d1018246
- Description: Various axially substituted Silicon octaphenoxyphthalocyanines were synthesised as potential photosensitisers in the photodynamic therapy of cancer. Conventional reflux reactions were used for synthesis as well as new microwave irradiation reactions, wherein the reaction times were decreased tenfold with a marginal increase in reaction yield and product purity. An interesting series of oligomeric (dimer to a nonamer) silicon octaphenoxyphthalocyanines were also successfully synthesised in a reaction similar to polymerisation reactions. These compounds were found to undergo an axial ligand transformation upon irradiation with red light (> 600 nm) in dimethylsulphoxide solution. All the ligands were transformed into the dihydroxy silicon octaphenoxyphthalocyanine with varying degrees of phototransformation quantum yields ranging in order from 10⁻³ to 10⁻⁵ depending on the axial ligand involved. During and after axial ligand transformations a photodegredation of the dihydroxy silicon octaphenoxy phthalocyanine was observed upon continued irradiation. The oligomers were found to undergo the same axial ligand transformation process with a phototransformation quantum yield of 10⁻⁵ The singlet oxygen quantum yields of the unaggregated monomeric silicon octaphenoxy phthalocyanines were all found to be approximately 0.2 with the exception of a compound with two (trihexyl)siloxy axial substituents that had a singlet oxygen quantum yield of approximately 0.4 in dimethylsulphoxide solutions. The oligomers showed a surprising trend of an increase in singlet oxygen quantum yield with an increase in phthalocyanine ring number up to the pentamer and then a dramatic decrease to the nonamer. The triplet quantum yield and triplet lifetime were determined by laser flash photolysis for selected compounds and no correlation was observed with any of these properties and the singlet oxygen quantum yields. These selected compounds all fluoresce and a very good correlation was found between the fluorescence lifetimes determined experimentally by laser photolysis and the Strickler-Berg equation for the non-aggregated compounds. Electrochemical measurements also indicate the importance of the axial ligands upon the behaviour of the phthalocyanines as cyclic voltammetric behaviour was determined by the nature of the axial ligand.
- Full Text:
- Date Issued: 2002
- Authors: Maree, Machiel David
- Date: 2002
- Subjects: Ligands , Photochemotherapy , Phthalocyanines
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4553 , http://hdl.handle.net/10962/d1018246
- Description: Various axially substituted Silicon octaphenoxyphthalocyanines were synthesised as potential photosensitisers in the photodynamic therapy of cancer. Conventional reflux reactions were used for synthesis as well as new microwave irradiation reactions, wherein the reaction times were decreased tenfold with a marginal increase in reaction yield and product purity. An interesting series of oligomeric (dimer to a nonamer) silicon octaphenoxyphthalocyanines were also successfully synthesised in a reaction similar to polymerisation reactions. These compounds were found to undergo an axial ligand transformation upon irradiation with red light (> 600 nm) in dimethylsulphoxide solution. All the ligands were transformed into the dihydroxy silicon octaphenoxyphthalocyanine with varying degrees of phototransformation quantum yields ranging in order from 10⁻³ to 10⁻⁵ depending on the axial ligand involved. During and after axial ligand transformations a photodegredation of the dihydroxy silicon octaphenoxy phthalocyanine was observed upon continued irradiation. The oligomers were found to undergo the same axial ligand transformation process with a phototransformation quantum yield of 10⁻⁵ The singlet oxygen quantum yields of the unaggregated monomeric silicon octaphenoxy phthalocyanines were all found to be approximately 0.2 with the exception of a compound with two (trihexyl)siloxy axial substituents that had a singlet oxygen quantum yield of approximately 0.4 in dimethylsulphoxide solutions. The oligomers showed a surprising trend of an increase in singlet oxygen quantum yield with an increase in phthalocyanine ring number up to the pentamer and then a dramatic decrease to the nonamer. The triplet quantum yield and triplet lifetime were determined by laser flash photolysis for selected compounds and no correlation was observed with any of these properties and the singlet oxygen quantum yields. These selected compounds all fluoresce and a very good correlation was found between the fluorescence lifetimes determined experimentally by laser photolysis and the Strickler-Berg equation for the non-aggregated compounds. Electrochemical measurements also indicate the importance of the axial ligands upon the behaviour of the phthalocyanines as cyclic voltammetric behaviour was determined by the nature of the axial ligand.
- Full Text:
- Date Issued: 2002
Effects of substituents on the photosensitizing and electrocatalytic properties of phthalocyanines
- Authors: Maree, Suzanne Elizabeth
- Date: 2002
- Subjects: Phthalocyanines
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4554 , http://hdl.handle.net/10962/d1018247
- Description: In this work a selection of octasubstituted phthalocyaninato Zinc, Ge(IV) and Sn(IV) complexes were synthesized for possible use in photodynamic therapy and their photochemistry, photophysics and electrochemistry studied. Third-generation complexes containing steroids, e.g. cholesterol and estrone, were synthesized to improve tumour selectivity. The zinc phthalocyanine complexes (ZnPc) showed that complexes containing electron-donating groups have higher photostability. Germanium phthalocyanine complexes (GePc) undergo phototransformation rather than direct photobleaching and the tin phthalocyanine complexes (SnPc) undergo photobleaching mediated by photoreduction of the phthalocyanine ring. Singlet oxygen production showed increased in the following order: GePc>SnPc>ZnPc. Triplet lifetimes of the GePc (168-340μs) are very similar to that of the ZnPc (197 - 366μs), but the triplet lifetimes of the SnPc are ten fold shorter (10 - 32μs ). Triplet quantum yields are higher for the GePc (0.20 - 0.50) and SnPc (0.08 - 0.45) than for the ZnPc (0.02 - 0.25). Fluorescence lifetimes of GePc ( 4.0 - 5.1 ns) are significantly longer than that of ZnPc (1.9 - 3.0 ns) and SnPc (0.2 - 0.4 ns). Fluorescence quantum yields decrease in the following order: GePc(0.21-0.31)>ZnPc(0.02-0.21)>SnPc(0.02- 0.06). Ring-substituted cobalt phthalocyanine complexes of the form CoPc(R)4 (R= NH2, N02, C(CH3)3, S03H and COOH) are compared for their catalytic activities towards the oxidation of cysteine. The potential for the electrocatalytic oxidation of cysteine is closely related to the Com/Co11 couple of the CoPc(R)4 complexes in acidic media and to the Con/Co1 couple in basic media. The catalytic current and the oxidation potential for cysteine are dependent on the pH of the solution, the potential becoming less positive and the currents increasing with increase in pH.
- Full Text:
- Date Issued: 2002
- Authors: Maree, Suzanne Elizabeth
- Date: 2002
- Subjects: Phthalocyanines
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4554 , http://hdl.handle.net/10962/d1018247
- Description: In this work a selection of octasubstituted phthalocyaninato Zinc, Ge(IV) and Sn(IV) complexes were synthesized for possible use in photodynamic therapy and their photochemistry, photophysics and electrochemistry studied. Third-generation complexes containing steroids, e.g. cholesterol and estrone, were synthesized to improve tumour selectivity. The zinc phthalocyanine complexes (ZnPc) showed that complexes containing electron-donating groups have higher photostability. Germanium phthalocyanine complexes (GePc) undergo phototransformation rather than direct photobleaching and the tin phthalocyanine complexes (SnPc) undergo photobleaching mediated by photoreduction of the phthalocyanine ring. Singlet oxygen production showed increased in the following order: GePc>SnPc>ZnPc. Triplet lifetimes of the GePc (168-340μs) are very similar to that of the ZnPc (197 - 366μs), but the triplet lifetimes of the SnPc are ten fold shorter (10 - 32μs ). Triplet quantum yields are higher for the GePc (0.20 - 0.50) and SnPc (0.08 - 0.45) than for the ZnPc (0.02 - 0.25). Fluorescence lifetimes of GePc ( 4.0 - 5.1 ns) are significantly longer than that of ZnPc (1.9 - 3.0 ns) and SnPc (0.2 - 0.4 ns). Fluorescence quantum yields decrease in the following order: GePc(0.21-0.31)>ZnPc(0.02-0.21)>SnPc(0.02- 0.06). Ring-substituted cobalt phthalocyanine complexes of the form CoPc(R)4 (R= NH2, N02, C(CH3)3, S03H and COOH) are compared for their catalytic activities towards the oxidation of cysteine. The potential for the electrocatalytic oxidation of cysteine is closely related to the Com/Co11 couple of the CoPc(R)4 complexes in acidic media and to the Con/Co1 couple in basic media. The catalytic current and the oxidation potential for cysteine are dependent on the pH of the solution, the potential becoming less positive and the currents increasing with increase in pH.
- Full Text:
- Date Issued: 2002
Electrocatalytic activity of symmetric and asymmetric Co(II) and Mn(III) porphyrins in the presence of graphene quantum dots towards the oxidation of hydrazine
- Authors: Jokazi, Mbulelo
- Date: 2022-10-14
- Subjects: Electrocatalysis , Hydrazine , Quantum dots , Graphene , Porphyrins
- Language: English
- Type: Academic theses , Master's theses , text
- Identifier: http://hdl.handle.net/10962/362894 , vital:65372
- Description: The influence of metal porphyrins in electro-oxidation of hydrazine is explored. A series of symmetric and asymmetric porphyrins alone and in the presence of graphene quantum dots (GQDs) are employed in this work. Tetra 4-aminophenyl porphyrin, manganese tetra 4-aminophenyl porphyrin, manganese tetra 4-aminophenyl porphyrin--GQDs, and manganese tetra 4-aminophenyl porphyrin@GQDs are the symmetric porphyrins. The asymmetric porphyrin and composites are 5, 10, 15-tris(aminophenyl)-20-(4-carboxyphenyl) porphyrins, manganese 5, 10, 15-tris(aminophenyl)-20-(4-carboxyphenyl) porphyrins, cobalt 5, 10, 15-tris(aminophenyl)-20-(4-carboxyphenyl) porphyrins, manganese 5, 10, 15-tris(aminophenyl)-20-(4-carboxyphenyl) porphyrins--GQDs, and cobalt 5, 10, 15-tris(aminophenyl)-20-(4-carboxyphenyl) porphyrins--GQDs. These complexes were synthesized and characterized accordingly and applied for electrocatalysis. The electrocatalytic experiments were carried out using glassy carbon electrode and the modification was through drop-dry method. The porphyrin and GQDs synthesized were characterized using UV-Vis spectroscopy, Mass spectrometry, X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy and energy dispersive x-ray spectroscopy. The modified electrodes were characterized using cyclic voltammetry and electrochemical Impedance spectroscopy. The introduction of metal ion in the center of the porphyrin improved electrocatalysis. The presence of push-pull substituents in the porphyrin lowered the oxidation potential and improved the catalysis. The presence of GQDs improved catalysis in both symmetric and asymmetric porphyrin compared to individual components. Cobalt porphyrins showed better activity than manganese porphyrin. , Thesis (MSc) -- Faculty of Science, Chemistry, 2022
- Full Text:
- Date Issued: 2022-10-14
- Authors: Jokazi, Mbulelo
- Date: 2022-10-14
- Subjects: Electrocatalysis , Hydrazine , Quantum dots , Graphene , Porphyrins
- Language: English
- Type: Academic theses , Master's theses , text
- Identifier: http://hdl.handle.net/10962/362894 , vital:65372
- Description: The influence of metal porphyrins in electro-oxidation of hydrazine is explored. A series of symmetric and asymmetric porphyrins alone and in the presence of graphene quantum dots (GQDs) are employed in this work. Tetra 4-aminophenyl porphyrin, manganese tetra 4-aminophenyl porphyrin, manganese tetra 4-aminophenyl porphyrin--GQDs, and manganese tetra 4-aminophenyl porphyrin@GQDs are the symmetric porphyrins. The asymmetric porphyrin and composites are 5, 10, 15-tris(aminophenyl)-20-(4-carboxyphenyl) porphyrins, manganese 5, 10, 15-tris(aminophenyl)-20-(4-carboxyphenyl) porphyrins, cobalt 5, 10, 15-tris(aminophenyl)-20-(4-carboxyphenyl) porphyrins, manganese 5, 10, 15-tris(aminophenyl)-20-(4-carboxyphenyl) porphyrins--GQDs, and cobalt 5, 10, 15-tris(aminophenyl)-20-(4-carboxyphenyl) porphyrins--GQDs. These complexes were synthesized and characterized accordingly and applied for electrocatalysis. The electrocatalytic experiments were carried out using glassy carbon electrode and the modification was through drop-dry method. The porphyrin and GQDs synthesized were characterized using UV-Vis spectroscopy, Mass spectrometry, X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy and energy dispersive x-ray spectroscopy. The modified electrodes were characterized using cyclic voltammetry and electrochemical Impedance spectroscopy. The introduction of metal ion in the center of the porphyrin improved electrocatalysis. The presence of push-pull substituents in the porphyrin lowered the oxidation potential and improved the catalysis. The presence of GQDs improved catalysis in both symmetric and asymmetric porphyrin compared to individual components. Cobalt porphyrins showed better activity than manganese porphyrin. , Thesis (MSc) -- Faculty of Science, Chemistry, 2022
- Full Text:
- Date Issued: 2022-10-14
Electrocatalytic detection of pesticides with electrodes modified with nanoparticles of phthalocyanines and multiwalled carbon nanotubes
- Authors: Siswana, Msimelelo Patrick
- Date: 2013
- Subjects: Phthalocyanines Pesticides Electrocatalysis Electrochemistry Nanotubes Nanoparticles Transmission electron microscopy Scanning electron microscopy
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4282 , http://hdl.handle.net/10962/d1002613
- Description: Three types of electrodes: carbon paste electrodes modified with nanoparticles of metallophthalocyanines (MPcNP-CPEs, M = Mn, Fe, Ni, Co), basal plane pyrolytic graphite electrodes modified with iron or nickel phthalocyanine nanoparticles and multiwalled carbon nanotube composites (FePcNP/MWCNT-BPPGE or NiPcNP/MWCNT-BPPGE),and basal plane pyrolytic graphite electrodes modified with multiwalled carbon nanotubes and electropolymerized metal tetra-aminophthalocyanines (poly-MTAPc-MWCNT-BPPGE), where M is Mn, Fe, Ni or Co, were prepared. Electrochemical characterizations showed that faster electron transfer kinetics occurred at the NiPcNP/MWCNT-BPPGE than at the FePcNP/MWCNT-BPPGE surface. SEM and electrochemical characterizations of poly-MTAPc-MWCNT-BPPGE showed that MTAPc had been deposited on the MWCNTBPPGE surface, and that the poly-CoTAPc-MWCNT-BPPGE exhibited the fastest electron transfer kinetics of all the poly-MTAPc-MWCNT-BPPGEs. Using amitrole and asulam as test analytes, electrochemical experiments showed that, amongst the CPEs, the FePcNP-CPE and NiPcNP-CPE displayed the most electrocatalytic behavior towards amitrole and asulam oxidation, respectively, and further experiments were done to obtain the electrochemical parameters associated with these electrodes and the corresponding analytes. Although, the FePcNP/MWCNT- BPPGE displayed electrocatalytic behavior towards amitrole oxidation in comparison with the bare BPPGE, it was less electrocatalytic than the FePcNP-CPE in terms of detection potential. The NiPcNP/MWCNT-BPPGE displayed the same detection potential as the NiPcNP-CPE. The poly-FeTAPc-MWCNT-BPPGE exhibited the most electrocatalytic behavior towards amitrole, of all the electrodes investigated, and the poly-CoTAPc-MWCNT-BPPGE displayed the best electrocatalytic behavior towards asulam, amongst the poly-MTAPc-MWCNT-BPPGEs.
- Full Text:
- Date Issued: 2013
- Authors: Siswana, Msimelelo Patrick
- Date: 2013
- Subjects: Phthalocyanines Pesticides Electrocatalysis Electrochemistry Nanotubes Nanoparticles Transmission electron microscopy Scanning electron microscopy
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4282 , http://hdl.handle.net/10962/d1002613
- Description: Three types of electrodes: carbon paste electrodes modified with nanoparticles of metallophthalocyanines (MPcNP-CPEs, M = Mn, Fe, Ni, Co), basal plane pyrolytic graphite electrodes modified with iron or nickel phthalocyanine nanoparticles and multiwalled carbon nanotube composites (FePcNP/MWCNT-BPPGE or NiPcNP/MWCNT-BPPGE),and basal plane pyrolytic graphite electrodes modified with multiwalled carbon nanotubes and electropolymerized metal tetra-aminophthalocyanines (poly-MTAPc-MWCNT-BPPGE), where M is Mn, Fe, Ni or Co, were prepared. Electrochemical characterizations showed that faster electron transfer kinetics occurred at the NiPcNP/MWCNT-BPPGE than at the FePcNP/MWCNT-BPPGE surface. SEM and electrochemical characterizations of poly-MTAPc-MWCNT-BPPGE showed that MTAPc had been deposited on the MWCNTBPPGE surface, and that the poly-CoTAPc-MWCNT-BPPGE exhibited the fastest electron transfer kinetics of all the poly-MTAPc-MWCNT-BPPGEs. Using amitrole and asulam as test analytes, electrochemical experiments showed that, amongst the CPEs, the FePcNP-CPE and NiPcNP-CPE displayed the most electrocatalytic behavior towards amitrole and asulam oxidation, respectively, and further experiments were done to obtain the electrochemical parameters associated with these electrodes and the corresponding analytes. Although, the FePcNP/MWCNT- BPPGE displayed electrocatalytic behavior towards amitrole oxidation in comparison with the bare BPPGE, it was less electrocatalytic than the FePcNP-CPE in terms of detection potential. The NiPcNP/MWCNT-BPPGE displayed the same detection potential as the NiPcNP-CPE. The poly-FeTAPc-MWCNT-BPPGE exhibited the most electrocatalytic behavior towards amitrole, of all the electrodes investigated, and the poly-CoTAPc-MWCNT-BPPGE displayed the best electrocatalytic behavior towards asulam, amongst the poly-MTAPc-MWCNT-BPPGEs.
- Full Text:
- Date Issued: 2013
Electrochemical sensing and immunosensing using metallophthalocyanines and biomolecular modified surfaces
- Authors: Mashazi, Philani Nkosinathi
- Date: 2012
- Subjects: Phthalocyanines , Electrochemistry , Electrodes, Enzyme , Measles -- Measurement
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:5580 , http://hdl.handle.net/10962/d1018248
- Description: The synthesis of cobalt and manganese phthalocyanine complexes bearing eight hexylthio and four amino substituents was carried out. The formation of thin films of these complexes using different modification methods was also studied. Hexylthio functionalized metallophthalocyanine complexes were immobilized onto gold electrode surfaces using the self-assembly techniques. Surface modifications using cobalt and manganese tetraamino phthalocyanine as polymers, monolayers (onto electrografted surfaces) and as carbon nanotube – metallophthalocyanine conjugates was also carried out. The new method of modifying gold electrodes with metal tetraamino phthalocyanine complexes was investigated. The modified electrode surfaces were studied for their electrocatalytic properties and as potential electrochemical sensors for the detection of hydrogen peroxide (H₂O₂). The limits of detection for the H₂O₂ were of the orders of ~10⁻⁷ M for all the modified electrodes. The modified electrodes gave very good analytical parameters; such as good sensitivity, linearity at studied concentration range and well-defined analytical peaks with increased current densities. The modification methods were reproducible, highly conducting thin films were formed and the modified electrodes were very stable. The design of electrochemical immunosensors for the detection of measles-specific antibodies was also carried out. The modified surface with measles-antigen as sensing element was accomplished using covalent immobilization for an intimate connection of the measles-antigen as a sensing layer onto an electrode surface. Two methods of detecting measles-specific antibodies were investigated and these methods were based on electrochemical impedance, i.e. label-free detection, and voltammetric method using horse-radish peroxidase (HRP) labeled antibody as a reporter. The detection of measles-specific antibodies was accomplished using both these methods. The potential applications of the designed immunosensor were evaluated in real samples (human and newborn calf serum) and the electrodes could detect the antibodies in the complex sample matrix with ease.
- Full Text:
- Date Issued: 2012
- Authors: Mashazi, Philani Nkosinathi
- Date: 2012
- Subjects: Phthalocyanines , Electrochemistry , Electrodes, Enzyme , Measles -- Measurement
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:5580 , http://hdl.handle.net/10962/d1018248
- Description: The synthesis of cobalt and manganese phthalocyanine complexes bearing eight hexylthio and four amino substituents was carried out. The formation of thin films of these complexes using different modification methods was also studied. Hexylthio functionalized metallophthalocyanine complexes were immobilized onto gold electrode surfaces using the self-assembly techniques. Surface modifications using cobalt and manganese tetraamino phthalocyanine as polymers, monolayers (onto electrografted surfaces) and as carbon nanotube – metallophthalocyanine conjugates was also carried out. The new method of modifying gold electrodes with metal tetraamino phthalocyanine complexes was investigated. The modified electrode surfaces were studied for their electrocatalytic properties and as potential electrochemical sensors for the detection of hydrogen peroxide (H₂O₂). The limits of detection for the H₂O₂ were of the orders of ~10⁻⁷ M for all the modified electrodes. The modified electrodes gave very good analytical parameters; such as good sensitivity, linearity at studied concentration range and well-defined analytical peaks with increased current densities. The modification methods were reproducible, highly conducting thin films were formed and the modified electrodes were very stable. The design of electrochemical immunosensors for the detection of measles-specific antibodies was also carried out. The modified surface with measles-antigen as sensing element was accomplished using covalent immobilization for an intimate connection of the measles-antigen as a sensing layer onto an electrode surface. Two methods of detecting measles-specific antibodies were investigated and these methods were based on electrochemical impedance, i.e. label-free detection, and voltammetric method using horse-radish peroxidase (HRP) labeled antibody as a reporter. The detection of measles-specific antibodies was accomplished using both these methods. The potential applications of the designed immunosensor were evaluated in real samples (human and newborn calf serum) and the electrodes could detect the antibodies in the complex sample matrix with ease.
- Full Text:
- Date Issued: 2012
Electrochemical studies of gold bioaccumulation by yeast cell wall components
- Authors: Lack, Barbara Anne
- Date: 1999
- Subjects: Hydrometallurgy , Electrochemical analysis , Gold ores , Gold
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4311 , http://hdl.handle.net/10962/d1004969 , Hydrometallurgy , Electrochemical analysis , Gold ores , Gold
- Description: Gold, amongst other group 11 metals, was almost certainly one of the first three metals known to man. In addition to the economic importance of the metal, gold has a wide variety of applications in the medical, electrocatalytical and micro-electronics fields. However, the determination of gold ions in solution, with accuracy, precision, sensitivity and selectivity is still an interesting and much debated topic in analytical chemistry. A system whereby gold ions have been successfully detected employing an electrochemical technique, known as stripping voltammetry, has been developed. The electrochemical method was chosen over other available techniques for the sensitivity, particularly at low concentrations, and selectivity properties; notably in the presence of other metal ions. Under acidic conditions, the electrochemical technique was applied and the presence of gold(III), at a concentration of 2.53 x 10⁻⁵ mol dm⁻³ in a mine waste water sample, was detected. Biomass, in particular yeast and algal types, have been successfully employed in extracting low concentrations of gold ions from industrial effluents. The manipulation of the biological facility for mineral interaction, biohydrometallurgy, may yield numerous potential new technologies. South Africa in particular would benefit from this area of research, since the country is a major ore and metal refining country and if the output and the efficiency of the mines could be improved, even by a small percentage, the financial rewards would be vast. In this study, the application of adsorptive cathodic stripping voltammetry (AdCSV) of gold(III) in the presence of various Saccharomyces cerevisiae cell wall components, was investigated to determine which, if any, were involved specifically in the chemical binding of the gold ions. The chitin and mannan extracts showed the most promise with detection limits of 1.10 x 10⁻⁶ mol dm⁻³ and 9 x 10⁻⁹ mol dm⁻³, respectively; employing the AdCSV technique. A modification of the stripping voltammetry technique, Osteryoung square wave stripping voltammetry (OSWSV), provided the lowest detection limit, for gold(IIl) in the presence of mannan, of 1.70 x 10⁻¹¹ mol dm⁻³ ; utilising a modified carbon paste electrode. The detection of gold(III) has been shown to be dependent on the type of electrode employed, the electrolyte solution and the presence of interfering agents. The effect of copper(II) and silver(I) on the detection of the gold(III) in solution was investigated; whilst the silver(I) has shown no detrimental effects on gold (III) detection systems, copper(II) has indicated the possibility of forming an inter-metallic compound with the gold(III). However, mannan has shown to selectively and preferentially bind the gold(III) in the presence of a ten-fold excess of copper(II). Nuclear magnetic resonance (NMR) and infrared (IR) spectroscopy, as well as computer modelling techniques were employed to further investIgate the mannan-gold(III) interaction and proposed complex formed. The NMR, IR and computer modelling data are in agreement with the electrochemical data on proposing a mannan-gold(III) complex. The co-ordination site was established to be in the vicinity of the H-I and H-2 protons and the gold(III) adopts a square-planar geometry upon co-ordination. The benefits of the research are useful from a biological perspective (i. e. as more is known about the binding sites, microbiologists/biochemists may work on the optimisation of parameters for these sites or work could be furthered into the enhanced expression of the sites) and an industrial one. In addition to the' two major benefits, an improved understanding of gold and its chemistry would be achieved, which is advantageous for other fields of research as well.
- Full Text:
- Date Issued: 1999
- Authors: Lack, Barbara Anne
- Date: 1999
- Subjects: Hydrometallurgy , Electrochemical analysis , Gold ores , Gold
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4311 , http://hdl.handle.net/10962/d1004969 , Hydrometallurgy , Electrochemical analysis , Gold ores , Gold
- Description: Gold, amongst other group 11 metals, was almost certainly one of the first three metals known to man. In addition to the economic importance of the metal, gold has a wide variety of applications in the medical, electrocatalytical and micro-electronics fields. However, the determination of gold ions in solution, with accuracy, precision, sensitivity and selectivity is still an interesting and much debated topic in analytical chemistry. A system whereby gold ions have been successfully detected employing an electrochemical technique, known as stripping voltammetry, has been developed. The electrochemical method was chosen over other available techniques for the sensitivity, particularly at low concentrations, and selectivity properties; notably in the presence of other metal ions. Under acidic conditions, the electrochemical technique was applied and the presence of gold(III), at a concentration of 2.53 x 10⁻⁵ mol dm⁻³ in a mine waste water sample, was detected. Biomass, in particular yeast and algal types, have been successfully employed in extracting low concentrations of gold ions from industrial effluents. The manipulation of the biological facility for mineral interaction, biohydrometallurgy, may yield numerous potential new technologies. South Africa in particular would benefit from this area of research, since the country is a major ore and metal refining country and if the output and the efficiency of the mines could be improved, even by a small percentage, the financial rewards would be vast. In this study, the application of adsorptive cathodic stripping voltammetry (AdCSV) of gold(III) in the presence of various Saccharomyces cerevisiae cell wall components, was investigated to determine which, if any, were involved specifically in the chemical binding of the gold ions. The chitin and mannan extracts showed the most promise with detection limits of 1.10 x 10⁻⁶ mol dm⁻³ and 9 x 10⁻⁹ mol dm⁻³, respectively; employing the AdCSV technique. A modification of the stripping voltammetry technique, Osteryoung square wave stripping voltammetry (OSWSV), provided the lowest detection limit, for gold(IIl) in the presence of mannan, of 1.70 x 10⁻¹¹ mol dm⁻³ ; utilising a modified carbon paste electrode. The detection of gold(III) has been shown to be dependent on the type of electrode employed, the electrolyte solution and the presence of interfering agents. The effect of copper(II) and silver(I) on the detection of the gold(III) in solution was investigated; whilst the silver(I) has shown no detrimental effects on gold (III) detection systems, copper(II) has indicated the possibility of forming an inter-metallic compound with the gold(III). However, mannan has shown to selectively and preferentially bind the gold(III) in the presence of a ten-fold excess of copper(II). Nuclear magnetic resonance (NMR) and infrared (IR) spectroscopy, as well as computer modelling techniques were employed to further investIgate the mannan-gold(III) interaction and proposed complex formed. The NMR, IR and computer modelling data are in agreement with the electrochemical data on proposing a mannan-gold(III) complex. The co-ordination site was established to be in the vicinity of the H-I and H-2 protons and the gold(III) adopts a square-planar geometry upon co-ordination. The benefits of the research are useful from a biological perspective (i. e. as more is known about the binding sites, microbiologists/biochemists may work on the optimisation of parameters for these sites or work could be furthered into the enhanced expression of the sites) and an industrial one. In addition to the' two major benefits, an improved understanding of gold and its chemistry would be achieved, which is advantageous for other fields of research as well.
- Full Text:
- Date Issued: 1999
Electrochemical studies of titanium, manganese and cobalt phthalocyanines
- Authors: Nombona, Nolwazi
- Date: 2009
- Subjects: Titanium , Manganese , Cobalt , Phthalocyanines , Electrochemistry , Electrodes , Self-assembly (Chemistry)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4312 , http://hdl.handle.net/10962/d1004970 , Titanium , Manganese , Cobalt , Phthalocyanines , Electrochemistry , Electrodes , Self-assembly (Chemistry)
- Description: Syntheses, spectral, electrochemical and spectroelectrochemical studies of phenylthio and amino derivatised metallophthalocyanines complexes are reported. The complexes are immobilized onto a gold macro disk, gold ultramicroelectrode and gold coated fiber electrodes via self assembly with phenylthio MPc derivatives or onto a glassy carbon electrode via electropolymerisation with amino MPc derivatives. For the first time MPc SAMs were formed on gold coated fiber. The electrocatalytic behavior of the modified electrodes was studied for the detection of nitrite and L-cysteine, all modified electrodes showed improved electrocatalytic oxidation compared to the unmodified electrode. The MPc complexes catalyzed nitrite oxidation via a two-electron mechanism producing nitrate. Cobalt tetraaminophthalocyanine showed the best catalytic activity for nitrite oxidation in terms of overpotential lowering compared to other complexes and thus was used for nitrite detection in a food sample, the nitrite concentration was determined to be 59.13 ppm, well within the limit for cured meat products. Electrocatalytic oxidation of L-cysteine on SAM modified gold coated fiber was reported for the first time. The gold coated fiber and ultamicro cylinder electrode were less stable towards the electro-oxidation of cysteine compared to its oxidation on the gold disk. The gold disk electrode gave better catalytic performance in terms of stability and reduction of overpotential. The phenylthio cobalt phthalocyanine derivative gave the best catalytic activity for L-cysteine oxidation in terms of overpotential lowering compared to other phenylthio derivatized MPc complexes. The amount of L-cysteine in human urine was 2.4 mM, well within the urinary L-cysteine excretion range for a healthy human being.
- Full Text:
- Date Issued: 2009
- Authors: Nombona, Nolwazi
- Date: 2009
- Subjects: Titanium , Manganese , Cobalt , Phthalocyanines , Electrochemistry , Electrodes , Self-assembly (Chemistry)
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4312 , http://hdl.handle.net/10962/d1004970 , Titanium , Manganese , Cobalt , Phthalocyanines , Electrochemistry , Electrodes , Self-assembly (Chemistry)
- Description: Syntheses, spectral, electrochemical and spectroelectrochemical studies of phenylthio and amino derivatised metallophthalocyanines complexes are reported. The complexes are immobilized onto a gold macro disk, gold ultramicroelectrode and gold coated fiber electrodes via self assembly with phenylthio MPc derivatives or onto a glassy carbon electrode via electropolymerisation with amino MPc derivatives. For the first time MPc SAMs were formed on gold coated fiber. The electrocatalytic behavior of the modified electrodes was studied for the detection of nitrite and L-cysteine, all modified electrodes showed improved electrocatalytic oxidation compared to the unmodified electrode. The MPc complexes catalyzed nitrite oxidation via a two-electron mechanism producing nitrate. Cobalt tetraaminophthalocyanine showed the best catalytic activity for nitrite oxidation in terms of overpotential lowering compared to other complexes and thus was used for nitrite detection in a food sample, the nitrite concentration was determined to be 59.13 ppm, well within the limit for cured meat products. Electrocatalytic oxidation of L-cysteine on SAM modified gold coated fiber was reported for the first time. The gold coated fiber and ultamicro cylinder electrode were less stable towards the electro-oxidation of cysteine compared to its oxidation on the gold disk. The gold disk electrode gave better catalytic performance in terms of stability and reduction of overpotential. The phenylthio cobalt phthalocyanine derivative gave the best catalytic activity for L-cysteine oxidation in terms of overpotential lowering compared to other phenylthio derivatized MPc complexes. The amount of L-cysteine in human urine was 2.4 mM, well within the urinary L-cysteine excretion range for a healthy human being.
- Full Text:
- Date Issued: 2009
Electrochemistry and photophysicochemical studies of titanium, tantalum and vanadium phthalocyanines in the presence of nanomaterials
- Authors: Chauke, Vongani Portia
- Date: 2012
- Subjects: Phthalocyanines -- Synthesis Electrochemistry Titanium Tantalum Vanadium
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4313 , http://hdl.handle.net/10962/d1004971
- Description: The syntheses of tetra- and octa-substituted phthalocyanine complexes of titanium (IV) oxide vanadium (IV) oxide and tantalum (V) hydroxide and their electrochemical characterisation are presented in this work. The structures and purity of these complexes were confirmed by NMR, infrared and mass spectroscopies and elemental analysis. They show good solubility in most common solvents especially non-viscous solvents such as dichloromethane and chloroform. The cyclic voltammograms (CV) showed reversible to quasi reversible behavior for all the reduction couples and the oxidation peaks were irreversible. Spectroelectrochemistry of the complexes confirmed metal and ring redox processes for TaPc and TiPc derivatives and ring based processes only for VPc complexes. The synthesis of gold nanoparticles and their conjugation with the new phthalocyanines was carried out. Similarly, single walled carbon nanotubes were conjugated to selected tantalum complexes and the characterization of all the nanomaterials and their conjugates using different techniques that include TEM, XRD and AFM is also presented in this work. The photophysical and photochemical properties and photocatalytic oxidation of cyclohexene properties of the newly synthesised in the presence of gold nanoparticles were investigated. The compounds were stable, well within the stability range for phthalocyanines. The singlet oxygen quantum yield values increased drastically in the presence of gold nanoparticles. The photocatalytic products obtained from the reaction were cyclohexene oxide, 2-cyclohexen-1-ol, 2-cyclohexene-1-one and 1,4-cyclohexanediol. The percentage conversion values, yields and selectivity values improved significantly in the presence of AuNPs. Singlet oxygen was determined to be the main agent involved in the photocatalytic oxidation of cyclohexene. The electrocatalytic oxidation of bisphenol A and p-nitrophenol was carried out using nickel tetraamino phthalocyanine and all the newly synthesised metallophthalocyanine in the presence of gold nanoparticles and single walled carbon nanotubes. The charge transfer behaviour of AuNPs was enhanced in the presence of TaPc, TiPc and VPc complexes. The presence of single walled carbon nanotubes further improved electron transfer and minimised electrode passivation.
- Full Text:
- Date Issued: 2012
- Authors: Chauke, Vongani Portia
- Date: 2012
- Subjects: Phthalocyanines -- Synthesis Electrochemistry Titanium Tantalum Vanadium
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4313 , http://hdl.handle.net/10962/d1004971
- Description: The syntheses of tetra- and octa-substituted phthalocyanine complexes of titanium (IV) oxide vanadium (IV) oxide and tantalum (V) hydroxide and their electrochemical characterisation are presented in this work. The structures and purity of these complexes were confirmed by NMR, infrared and mass spectroscopies and elemental analysis. They show good solubility in most common solvents especially non-viscous solvents such as dichloromethane and chloroform. The cyclic voltammograms (CV) showed reversible to quasi reversible behavior for all the reduction couples and the oxidation peaks were irreversible. Spectroelectrochemistry of the complexes confirmed metal and ring redox processes for TaPc and TiPc derivatives and ring based processes only for VPc complexes. The synthesis of gold nanoparticles and their conjugation with the new phthalocyanines was carried out. Similarly, single walled carbon nanotubes were conjugated to selected tantalum complexes and the characterization of all the nanomaterials and their conjugates using different techniques that include TEM, XRD and AFM is also presented in this work. The photophysical and photochemical properties and photocatalytic oxidation of cyclohexene properties of the newly synthesised in the presence of gold nanoparticles were investigated. The compounds were stable, well within the stability range for phthalocyanines. The singlet oxygen quantum yield values increased drastically in the presence of gold nanoparticles. The photocatalytic products obtained from the reaction were cyclohexene oxide, 2-cyclohexen-1-ol, 2-cyclohexene-1-one and 1,4-cyclohexanediol. The percentage conversion values, yields and selectivity values improved significantly in the presence of AuNPs. Singlet oxygen was determined to be the main agent involved in the photocatalytic oxidation of cyclohexene. The electrocatalytic oxidation of bisphenol A and p-nitrophenol was carried out using nickel tetraamino phthalocyanine and all the newly synthesised metallophthalocyanine in the presence of gold nanoparticles and single walled carbon nanotubes. The charge transfer behaviour of AuNPs was enhanced in the presence of TaPc, TiPc and VPc complexes. The presence of single walled carbon nanotubes further improved electron transfer and minimised electrode passivation.
- Full Text:
- Date Issued: 2012
Electrode surface modification using iron(II) phthalocyanine immobilized via electrografting and click chemistry and clicked onto azide-functionalized quantum dots: applications in electrocatalysis
- Authors: Nxele, Siphesihle Robin
- Date: 2016
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/3464 , vital:20501
- Description: Tetrakis(5-hexynoxy)Fe(II) phthalocyanine was used alone and in combination with quantum dots (QDs) in order to test the electrocatalytic ability with hydrazine and paraquat as the analytes of interest. This novel phthalocaynine was successfully synthesised and characterized using various characterisation techniques. The QDs used were the well-known core-shell CdSe/ZnS nanostructures. The fabrication of glassy carbon electrodes involved covalent attachment by electrochemical grafting and click chemistry for the first part of the work and the second part involved the conjugation of the synthesised QDs and the phthalocyanine by click chemistry. This approach of conjugating these nanostructures introduced another aspect of novelty to the work reported in this thesis. The immobilisation of this conjugate on a glassy carbon electrode (GCE) was achieved by adsorption. Characterisation techniques such as infrared spectroscopy, x-ray diffractometry, UV/vis spectroscopy, transmission electron microscopy and x-ray photoelectron spectroscopy were used to characterise the molecules and conjugates of interest. With respect to the electrocatalytic part of the work, electrode surface characterisation involved scanning electrochemical microscopy and cyclic voltammetry to determine changes in the nature of the surface as well as reactivity of the surface at different modification steps. Detection limits and the sensitivity determined for the electrocatalysts fabricated here proved to be an improvement compared to other reported work involving phthalocyanines and the test analytes chosen for application. With respect to the conjugate, the electrocatalytic ability was improved when the QDs and phthalocyanine were combined using click chemistry compared to using the phthalocyanine alone.
- Full Text:
- Date Issued: 2016
- Authors: Nxele, Siphesihle Robin
- Date: 2016
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/3464 , vital:20501
- Description: Tetrakis(5-hexynoxy)Fe(II) phthalocyanine was used alone and in combination with quantum dots (QDs) in order to test the electrocatalytic ability with hydrazine and paraquat as the analytes of interest. This novel phthalocaynine was successfully synthesised and characterized using various characterisation techniques. The QDs used were the well-known core-shell CdSe/ZnS nanostructures. The fabrication of glassy carbon electrodes involved covalent attachment by electrochemical grafting and click chemistry for the first part of the work and the second part involved the conjugation of the synthesised QDs and the phthalocyanine by click chemistry. This approach of conjugating these nanostructures introduced another aspect of novelty to the work reported in this thesis. The immobilisation of this conjugate on a glassy carbon electrode (GCE) was achieved by adsorption. Characterisation techniques such as infrared spectroscopy, x-ray diffractometry, UV/vis spectroscopy, transmission electron microscopy and x-ray photoelectron spectroscopy were used to characterise the molecules and conjugates of interest. With respect to the electrocatalytic part of the work, electrode surface characterisation involved scanning electrochemical microscopy and cyclic voltammetry to determine changes in the nature of the surface as well as reactivity of the surface at different modification steps. Detection limits and the sensitivity determined for the electrocatalysts fabricated here proved to be an improvement compared to other reported work involving phthalocyanines and the test analytes chosen for application. With respect to the conjugate, the electrocatalytic ability was improved when the QDs and phthalocyanine were combined using click chemistry compared to using the phthalocyanine alone.
- Full Text:
- Date Issued: 2016
Electrode surface modification using metallophthalocyanines and metal nanoparticles : electrocatalytic activity
- Authors: Maringa, Audacity
- Date: 2015
- Subjects: Phthalocyanines , Nanoparticles , Electrocatalysis , Scanning electron microscopy , X-ray photoelectron spectroscopy , Electrochemistry , Scanning electrochemical microscopy
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4541 , http://hdl.handle.net/10962/d1017921
- Description: Metallophthalocyanines and metal nanoparticles were successfully synthesized and applied for the electrooxidation of amitrole, nitrite and hydrazine individually or when employed together. The synthesized materials were characterized using the following techniques: predominantly scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), electrochemistry and scanning electrochemical microscopy (SECM). Different electrode modification methods were used to modify the glassy carbon substrates. The methods include adsorption, electrodeposition, electropolymerization and click chemistry. Modifying the glassy carbon substrate with MPc (electropolymerization) followed by metal nanoparticles (electrodeposition) or vice versa, made a hybrid modified surface that had efficient electron transfer. This was confirmed by electrochemical impedance studies with voltammetry measurements having lower detection potentials for the analytes. This work also describes for the first time the micropatterning of the glassy carbon substrate using the SECM tip. The substrate was electrografted with 4-azidobenzenediazonium salt and then the click reaction was performed using ethynylferrocene facilitated by Cu⁺ produced at the SECM tip. The SECM imaging was then used to show the clicked spot.
- Full Text:
- Date Issued: 2015
- Authors: Maringa, Audacity
- Date: 2015
- Subjects: Phthalocyanines , Nanoparticles , Electrocatalysis , Scanning electron microscopy , X-ray photoelectron spectroscopy , Electrochemistry , Scanning electrochemical microscopy
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4541 , http://hdl.handle.net/10962/d1017921
- Description: Metallophthalocyanines and metal nanoparticles were successfully synthesized and applied for the electrooxidation of amitrole, nitrite and hydrazine individually or when employed together. The synthesized materials were characterized using the following techniques: predominantly scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), electrochemistry and scanning electrochemical microscopy (SECM). Different electrode modification methods were used to modify the glassy carbon substrates. The methods include adsorption, electrodeposition, electropolymerization and click chemistry. Modifying the glassy carbon substrate with MPc (electropolymerization) followed by metal nanoparticles (electrodeposition) or vice versa, made a hybrid modified surface that had efficient electron transfer. This was confirmed by electrochemical impedance studies with voltammetry measurements having lower detection potentials for the analytes. This work also describes for the first time the micropatterning of the glassy carbon substrate using the SECM tip. The substrate was electrografted with 4-azidobenzenediazonium salt and then the click reaction was performed using ethynylferrocene facilitated by Cu⁺ produced at the SECM tip. The SECM imaging was then used to show the clicked spot.
- Full Text:
- Date Issued: 2015