A statistical study of the errors involved in the sampling and chemical analysis of soils and plants, with particular reference to citrus and pineapples
- Steyn, Willem Johannes Abraham
- Authors: Steyn, Willem Johannes Abraham
- Date: 1958
- Subjects: Soil chemistry , Plants -- Analysis , Soils -- Analysis
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4506 , http://hdl.handle.net/10962/d1013291
- Description: 1. Accurate and reproducible methods for the determination of N and acid- extractable P in soils are described. The variations in N, P, and K found by intensive sampling of three different soil types are presented. 3. Suggestions for the adequate sampling of soils for various purposes arc given. 4. A study is presented of the preparative stages in leaf analysis (washing, drying, grinding and storage) as applied to citrus and pineapple leaf material. Likely errors are pointed out and procedures whereby these may be minimised are described. 5. A reliable wet-ashing procedure for obtaining leaf solutions is described. 6. Accurate and reproducible methods for the determination of total N, P,. K, Ca, Mg, Na, Fe, Mn, Zn and Cu in citrus and pineapple leaves are presented. 7. It is shown that diurnal variations in nutrient concentrations occur in citrus and pineapple leaves. 8. The variations in N, P, K, Ca, Mg, Na, Fe, Mn, Zn and Cu, occurring from tree to tree in 3 different Navel orange blocks are presented. It is shown that if all these elements are to be represented . to within 10% of the mean values on a 19 : 1 probability level, all the trees in the blocks would have to be sampled. Reasonable sampling procedures for various purposes are suggested. 9. The variations in N, P, K, Ca, Mg, Fe, Mn, Zn and Cu, occurring in 3 different Cayenne pineapple plantations are presented and described. Suitable sampling procedures are suggested.
- Full Text:
- Date Issued: 1958
- Authors: Steyn, Willem Johannes Abraham
- Date: 1958
- Subjects: Soil chemistry , Plants -- Analysis , Soils -- Analysis
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4506 , http://hdl.handle.net/10962/d1013291
- Description: 1. Accurate and reproducible methods for the determination of N and acid- extractable P in soils are described. The variations in N, P, and K found by intensive sampling of three different soil types are presented. 3. Suggestions for the adequate sampling of soils for various purposes arc given. 4. A study is presented of the preparative stages in leaf analysis (washing, drying, grinding and storage) as applied to citrus and pineapple leaf material. Likely errors are pointed out and procedures whereby these may be minimised are described. 5. A reliable wet-ashing procedure for obtaining leaf solutions is described. 6. Accurate and reproducible methods for the determination of total N, P,. K, Ca, Mg, Na, Fe, Mn, Zn and Cu in citrus and pineapple leaves are presented. 7. It is shown that diurnal variations in nutrient concentrations occur in citrus and pineapple leaves. 8. The variations in N, P, K, Ca, Mg, Na, Fe, Mn, Zn and Cu, occurring from tree to tree in 3 different Navel orange blocks are presented. It is shown that if all these elements are to be represented . to within 10% of the mean values on a 19 : 1 probability level, all the trees in the blocks would have to be sampled. Reasonable sampling procedures for various purposes are suggested. 9. The variations in N, P, K, Ca, Mg, Fe, Mn, Zn and Cu, occurring in 3 different Cayenne pineapple plantations are presented and described. Suitable sampling procedures are suggested.
- Full Text:
- Date Issued: 1958
Photophysical properties and photodynamic therapy activities of symmetrical and asymmetrical porphyrins embedded into Pluronic polymer micelles and nonlinear optical properties of an asymmetrical phthalocyanine
- Authors: Managa, Muthumuni Elizabeth
- Date: 2019
- Subjects: Porphyrins , Phthalocyanines
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/67625 , vital:29122
- Description: This work reports on the synthesis of symmetrical and asymmetrical novel porphyrins that have been incorporated into Pluronic polymers, as well as the synthesis of asymmetrical phthalocyanine. The new compounds were characterized by elemental analysis, Fourier-transform infrared spectroscopy (FT-IR), proton nuclear magnetic resonance (1H NMR), mass spectrometry and UV–Visible spectroscopy. The porphyrins that are synthesised were not water soluble but upon incorporating into Pluronic polymer micelles, they became water soluble. The polymer was also modified and linked to folic acid, to enhance selectivity for photodynamic therapy application, where MCF7 breast cancer cells were used. The singlet oxygen quantum yields were lower for the metal free porphyrins as compared to metalled ones due to the heavy atom effect of ClGa, Zn and Cl2Si in the latter which encourages intersystem crossing to the triplet state. Singlet oxygen quantum yields for water soluble derivatives increased upon being encapsulated into the micelles for all. The Stern-Volmer constant (Ksv), binding constant (Kb) and number of binding sites (n) were investigated in order to understand the interaction between the polymer micelles and the porphyrins, and it was showed that the central metals play a role in the manner which the porphyrin interacts with the micelles. The dark toxicity and photodynamic activity of the novel porphyrins upon encapsulating to Pluronic polymer micelles is also reported. There was minimal dark toxicity for all complexes with > 90% cell survival. The photodynamic activity of water insoluble porphyrins improved when encapsulated into the micelles. Novel asymmetrical phthalocyanines were also synthesised for nonlinear optics (NLO) studies in solution and thin films.
- Full Text:
- Date Issued: 2019
- Authors: Managa, Muthumuni Elizabeth
- Date: 2019
- Subjects: Porphyrins , Phthalocyanines
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/67625 , vital:29122
- Description: This work reports on the synthesis of symmetrical and asymmetrical novel porphyrins that have been incorporated into Pluronic polymers, as well as the synthesis of asymmetrical phthalocyanine. The new compounds were characterized by elemental analysis, Fourier-transform infrared spectroscopy (FT-IR), proton nuclear magnetic resonance (1H NMR), mass spectrometry and UV–Visible spectroscopy. The porphyrins that are synthesised were not water soluble but upon incorporating into Pluronic polymer micelles, they became water soluble. The polymer was also modified and linked to folic acid, to enhance selectivity for photodynamic therapy application, where MCF7 breast cancer cells were used. The singlet oxygen quantum yields were lower for the metal free porphyrins as compared to metalled ones due to the heavy atom effect of ClGa, Zn and Cl2Si in the latter which encourages intersystem crossing to the triplet state. Singlet oxygen quantum yields for water soluble derivatives increased upon being encapsulated into the micelles for all. The Stern-Volmer constant (Ksv), binding constant (Kb) and number of binding sites (n) were investigated in order to understand the interaction between the polymer micelles and the porphyrins, and it was showed that the central metals play a role in the manner which the porphyrin interacts with the micelles. The dark toxicity and photodynamic activity of the novel porphyrins upon encapsulating to Pluronic polymer micelles is also reported. There was minimal dark toxicity for all complexes with > 90% cell survival. The photodynamic activity of water insoluble porphyrins improved when encapsulated into the micelles. Novel asymmetrical phthalocyanines were also synthesised for nonlinear optics (NLO) studies in solution and thin films.
- Full Text:
- Date Issued: 2019
Design, synthesis and evaluation of novel, metal complexing agents
- Authors: Hagemann, Justin Philip
- Date: 1997
- Subjects: Ligands Metal complexes
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4307 , http://hdl.handle.net/10962/d1004965
- Description: Various chelating ligands have been designed and synthesised; these include amino-amide ligands, tetraacetic acid systems and sulfur-containing amide ligands. Difficulties in the synthesis and purification of the amino-amide ligands were largely overcome, permitting the mono acylation of ethylenediamine and the synthesis of bis(2-aminoethyl)-2-benzylpropanediamide. Novel tetraacetic acid ligands, based on the propanediamide backbone and targeted as EDTA analogues, were obtained from their methyl and benzyl esters; but the instability of the tetraacids prevented their full characterisation. Bidentate, tridentate and tetradentate sulfur-containing monoamide ligands, based on the ortho-thio acetanilide moiety, were designed to specifically chelate platinum and palladium in the presence of base metals. In their synthesis, thiocyanation was used to introduce the orth-thio group on para-substituted anilines, and further functionalisation was achieved via appropriate protection of nucleophilic sulfur moieties. A range of tetradentate, sulfur-containing diamide ligands was also synthesised by reacting substituted 2-mercaptoacetanilides with 1,2- dibromoethane. Novel ligands were characterised by spectroscopic (¹H and ¹³C NMR; IR and M S) techniques and elemental (combustion and high resolution MS) analysis. Computer modelling and ¹H NMR chemical shift data have been used to explore the conformational preferences of the sulfur-containing acetanilide ligands. The macrocyclic ligands and systems with ortho-methylthio substituents appear to exhibit the greatest degree of coplanarity of the aromatic and amide functions. Solvent extraction studies revealed that the sulfur-containing amide ligands selectively extracted palladium(II) from platinum(II), copper(II}, nickel(II} and cobalt(II}. Even though the palladium(II} was extracted from an acidic medium, certain monoamide ligands were able to complex palladium(II) through their sulfur and deprotonated amide nitrogen donors, a trithia monoamide ligand being observed to displace all the chloride ligands on palladium to form a monomeric tetracoordinate complex. The diamide ligands, however, appeared to favour extraction of palladium(II) by coordination through their sulfur donors, forming 5-membered sulfur-sulfur chelates. In basic media (pH 8-9), selected sulfur-containing monoamide and diamide ligands have been shown to complex platinum(II) and palladium(II) through their sulfur and deprotonated amide nitrogen donors. At neutral pH, a dimercapto monoamide ligand has been shown to complex platinum from cisplatin with partial expulsion of the ammine ligands, while a macrocyclic trithia monoamide ligand has been observed to complex platinum from tetrachloroplatinate with concomitant deprotonation of the amide nitrogen. Where possible, the complexes were characterised by infrared and ¹H NMR spectroscopy and have also been studied using the computer modelling soft-ware programmes, Momec® and Hyperchem®.
- Full Text:
- Date Issued: 1997
- Authors: Hagemann, Justin Philip
- Date: 1997
- Subjects: Ligands Metal complexes
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4307 , http://hdl.handle.net/10962/d1004965
- Description: Various chelating ligands have been designed and synthesised; these include amino-amide ligands, tetraacetic acid systems and sulfur-containing amide ligands. Difficulties in the synthesis and purification of the amino-amide ligands were largely overcome, permitting the mono acylation of ethylenediamine and the synthesis of bis(2-aminoethyl)-2-benzylpropanediamide. Novel tetraacetic acid ligands, based on the propanediamide backbone and targeted as EDTA analogues, were obtained from their methyl and benzyl esters; but the instability of the tetraacids prevented their full characterisation. Bidentate, tridentate and tetradentate sulfur-containing monoamide ligands, based on the ortho-thio acetanilide moiety, were designed to specifically chelate platinum and palladium in the presence of base metals. In their synthesis, thiocyanation was used to introduce the orth-thio group on para-substituted anilines, and further functionalisation was achieved via appropriate protection of nucleophilic sulfur moieties. A range of tetradentate, sulfur-containing diamide ligands was also synthesised by reacting substituted 2-mercaptoacetanilides with 1,2- dibromoethane. Novel ligands were characterised by spectroscopic (¹H and ¹³C NMR; IR and M S) techniques and elemental (combustion and high resolution MS) analysis. Computer modelling and ¹H NMR chemical shift data have been used to explore the conformational preferences of the sulfur-containing acetanilide ligands. The macrocyclic ligands and systems with ortho-methylthio substituents appear to exhibit the greatest degree of coplanarity of the aromatic and amide functions. Solvent extraction studies revealed that the sulfur-containing amide ligands selectively extracted palladium(II) from platinum(II), copper(II}, nickel(II} and cobalt(II}. Even though the palladium(II} was extracted from an acidic medium, certain monoamide ligands were able to complex palladium(II) through their sulfur and deprotonated amide nitrogen donors, a trithia monoamide ligand being observed to displace all the chloride ligands on palladium to form a monomeric tetracoordinate complex. The diamide ligands, however, appeared to favour extraction of palladium(II) by coordination through their sulfur donors, forming 5-membered sulfur-sulfur chelates. In basic media (pH 8-9), selected sulfur-containing monoamide and diamide ligands have been shown to complex platinum(II) and palladium(II) through their sulfur and deprotonated amide nitrogen donors. At neutral pH, a dimercapto monoamide ligand has been shown to complex platinum from cisplatin with partial expulsion of the ammine ligands, while a macrocyclic trithia monoamide ligand has been observed to complex platinum from tetrachloroplatinate with concomitant deprotonation of the amide nitrogen. Where possible, the complexes were characterised by infrared and ¹H NMR spectroscopy and have also been studied using the computer modelling soft-ware programmes, Momec® and Hyperchem®.
- Full Text:
- Date Issued: 1997
Effects of Axial Ligands on the Photosensitising Properties of Silicon Octaphenoxyphthalocyanines
- Authors: Maree, Machiel David
- Date: 2002
- Subjects: Ligands , Photochemotherapy , Phthalocyanines
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4553 , http://hdl.handle.net/10962/d1018246
- Description: Various axially substituted Silicon octaphenoxyphthalocyanines were synthesised as potential photosensitisers in the photodynamic therapy of cancer. Conventional reflux reactions were used for synthesis as well as new microwave irradiation reactions, wherein the reaction times were decreased tenfold with a marginal increase in reaction yield and product purity. An interesting series of oligomeric (dimer to a nonamer) silicon octaphenoxyphthalocyanines were also successfully synthesised in a reaction similar to polymerisation reactions. These compounds were found to undergo an axial ligand transformation upon irradiation with red light (> 600 nm) in dimethylsulphoxide solution. All the ligands were transformed into the dihydroxy silicon octaphenoxyphthalocyanine with varying degrees of phototransformation quantum yields ranging in order from 10⁻³ to 10⁻⁵ depending on the axial ligand involved. During and after axial ligand transformations a photodegredation of the dihydroxy silicon octaphenoxy phthalocyanine was observed upon continued irradiation. The oligomers were found to undergo the same axial ligand transformation process with a phototransformation quantum yield of 10⁻⁵ The singlet oxygen quantum yields of the unaggregated monomeric silicon octaphenoxy phthalocyanines were all found to be approximately 0.2 with the exception of a compound with two (trihexyl)siloxy axial substituents that had a singlet oxygen quantum yield of approximately 0.4 in dimethylsulphoxide solutions. The oligomers showed a surprising trend of an increase in singlet oxygen quantum yield with an increase in phthalocyanine ring number up to the pentamer and then a dramatic decrease to the nonamer. The triplet quantum yield and triplet lifetime were determined by laser flash photolysis for selected compounds and no correlation was observed with any of these properties and the singlet oxygen quantum yields. These selected compounds all fluoresce and a very good correlation was found between the fluorescence lifetimes determined experimentally by laser photolysis and the Strickler-Berg equation for the non-aggregated compounds. Electrochemical measurements also indicate the importance of the axial ligands upon the behaviour of the phthalocyanines as cyclic voltammetric behaviour was determined by the nature of the axial ligand.
- Full Text:
- Date Issued: 2002
- Authors: Maree, Machiel David
- Date: 2002
- Subjects: Ligands , Photochemotherapy , Phthalocyanines
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4553 , http://hdl.handle.net/10962/d1018246
- Description: Various axially substituted Silicon octaphenoxyphthalocyanines were synthesised as potential photosensitisers in the photodynamic therapy of cancer. Conventional reflux reactions were used for synthesis as well as new microwave irradiation reactions, wherein the reaction times were decreased tenfold with a marginal increase in reaction yield and product purity. An interesting series of oligomeric (dimer to a nonamer) silicon octaphenoxyphthalocyanines were also successfully synthesised in a reaction similar to polymerisation reactions. These compounds were found to undergo an axial ligand transformation upon irradiation with red light (> 600 nm) in dimethylsulphoxide solution. All the ligands were transformed into the dihydroxy silicon octaphenoxyphthalocyanine with varying degrees of phototransformation quantum yields ranging in order from 10⁻³ to 10⁻⁵ depending on the axial ligand involved. During and after axial ligand transformations a photodegredation of the dihydroxy silicon octaphenoxy phthalocyanine was observed upon continued irradiation. The oligomers were found to undergo the same axial ligand transformation process with a phototransformation quantum yield of 10⁻⁵ The singlet oxygen quantum yields of the unaggregated monomeric silicon octaphenoxy phthalocyanines were all found to be approximately 0.2 with the exception of a compound with two (trihexyl)siloxy axial substituents that had a singlet oxygen quantum yield of approximately 0.4 in dimethylsulphoxide solutions. The oligomers showed a surprising trend of an increase in singlet oxygen quantum yield with an increase in phthalocyanine ring number up to the pentamer and then a dramatic decrease to the nonamer. The triplet quantum yield and triplet lifetime were determined by laser flash photolysis for selected compounds and no correlation was observed with any of these properties and the singlet oxygen quantum yields. These selected compounds all fluoresce and a very good correlation was found between the fluorescence lifetimes determined experimentally by laser photolysis and the Strickler-Berg equation for the non-aggregated compounds. Electrochemical measurements also indicate the importance of the axial ligands upon the behaviour of the phthalocyanines as cyclic voltammetric behaviour was determined by the nature of the axial ligand.
- Full Text:
- Date Issued: 2002
Structural and stereochemical investigations of terrestrial and marine pyrone metabolites
- Authors: Collett, Lynne Alison
- Date: 1997
- Subjects: Metabolites , Stereochemistry , Siphonaria
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4348 , http://hdl.handle.net/10962/d1005013 , Metabolites , Stereochemistry , Siphonaria
- Description: This thesis presents an investigation into the chemistry of 6 substituted 5, 6-dihydro-a-pyrone compounds. A comprehensive review of these compounds was published in 1989 and the subsequent literature is covered in an updated review presented below. Eight 6-substituted 5,6-dihydro-a-pyrone metabolites from three different South African plant species Cryptocarya latijolia, Syncolostemon densiflorus, and Syncolostemon argenteus have been the subject of structural and stereochemical investigations. The absolute stereochemistry of the known compound "triacetate" from C. latijolia has been established as 6R-[2R,4S,6S-(triacetyloxy)heptylJ-5,6-dihydro-2H-pyran-2-one (74) using CD and acetonide formation with subsequent application of the modified Moshers method. The absolute stereochemistry of the related metabolite "diacetate", also from C. latijolia, has been assigned as 6R-[2S,4S-diacetyloxypentylJ-5,6-dihydro-2H-pyran-2-one (76). In addition, the outstanding stereochemistry at C-5' in syndenolide, from S. densiflorus, followed from conversion to its diacetonide and subsequent NMR analysis. Syndenolide is therefore 6R-[5S-(acetoxy)-IR,2R,3S-(trihydroxy)-heptylJ-5,6- dihydro-2H -pyran-2-one. The genus Syncolostemon has proved to be a rich source of a-pyrone compounds and the chemistry of S. argenteus, not investigated previously, was examined as part of an ongoing search for new 5,6-dihydro-a-pyrones. The study yielded five new a-pyrone natural products, synargentolide A-E. The structure of synargentolide A (82) has been assigned as 6R[4R,5R,6S-triacetyloxy-lE-heptenylJ-5,6-dihydro-2H-pyran-2-one using CD and NMR techniques. The structures of synargentolide B (87), C (92) and E (94) also followed from a detailed NMR analysis and the stereochemistry tentatively assigned based on CD and NMR data. Synargentolide D (93) was thermally unstable, and a paucity of material prevented stereochemical investigations, however the structure was determined from initial NMR analysis. The marine molluscs of the genus Siphonaria have only become the subject of chemical studies in the last fifteen years. These molluscs characteristically produce polypropionate type natural products. A review of Siphonarian polypropionate metabolites containing a pyrone functionality is presented. Examination of an endemic South African species Siphonaria serrata yielded one novel polypropionate metabolite containing a ),-pyrone functionality, siserrone A (131). The structure of this compound was unambiguously established using standard NMR experiments. The relative stereochemisty of the hemi-ketal moiety was assigned from a careful analysis of the ROESY NMR spectrum and the stereochemisty of the acyclic portion determined from a comparison of the 13C and 'H NMR data of a degradation product with the corresponding data of a synthetic compound. It was also established that the modified Moshers method could not be used to determine the absolute stereochemistry of the secondary hydroxy I substituent at C-11. The absolute stereochemistry of 131 was thus assigned in accordance with the proven stereochemistry of Siphonarian metabolites.
- Full Text:
- Date Issued: 1997
- Authors: Collett, Lynne Alison
- Date: 1997
- Subjects: Metabolites , Stereochemistry , Siphonaria
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4348 , http://hdl.handle.net/10962/d1005013 , Metabolites , Stereochemistry , Siphonaria
- Description: This thesis presents an investigation into the chemistry of 6 substituted 5, 6-dihydro-a-pyrone compounds. A comprehensive review of these compounds was published in 1989 and the subsequent literature is covered in an updated review presented below. Eight 6-substituted 5,6-dihydro-a-pyrone metabolites from three different South African plant species Cryptocarya latijolia, Syncolostemon densiflorus, and Syncolostemon argenteus have been the subject of structural and stereochemical investigations. The absolute stereochemistry of the known compound "triacetate" from C. latijolia has been established as 6R-[2R,4S,6S-(triacetyloxy)heptylJ-5,6-dihydro-2H-pyran-2-one (74) using CD and acetonide formation with subsequent application of the modified Moshers method. The absolute stereochemistry of the related metabolite "diacetate", also from C. latijolia, has been assigned as 6R-[2S,4S-diacetyloxypentylJ-5,6-dihydro-2H-pyran-2-one (76). In addition, the outstanding stereochemistry at C-5' in syndenolide, from S. densiflorus, followed from conversion to its diacetonide and subsequent NMR analysis. Syndenolide is therefore 6R-[5S-(acetoxy)-IR,2R,3S-(trihydroxy)-heptylJ-5,6- dihydro-2H -pyran-2-one. The genus Syncolostemon has proved to be a rich source of a-pyrone compounds and the chemistry of S. argenteus, not investigated previously, was examined as part of an ongoing search for new 5,6-dihydro-a-pyrones. The study yielded five new a-pyrone natural products, synargentolide A-E. The structure of synargentolide A (82) has been assigned as 6R[4R,5R,6S-triacetyloxy-lE-heptenylJ-5,6-dihydro-2H-pyran-2-one using CD and NMR techniques. The structures of synargentolide B (87), C (92) and E (94) also followed from a detailed NMR analysis and the stereochemistry tentatively assigned based on CD and NMR data. Synargentolide D (93) was thermally unstable, and a paucity of material prevented stereochemical investigations, however the structure was determined from initial NMR analysis. The marine molluscs of the genus Siphonaria have only become the subject of chemical studies in the last fifteen years. These molluscs characteristically produce polypropionate type natural products. A review of Siphonarian polypropionate metabolites containing a pyrone functionality is presented. Examination of an endemic South African species Siphonaria serrata yielded one novel polypropionate metabolite containing a ),-pyrone functionality, siserrone A (131). The structure of this compound was unambiguously established using standard NMR experiments. The relative stereochemisty of the hemi-ketal moiety was assigned from a careful analysis of the ROESY NMR spectrum and the stereochemisty of the acyclic portion determined from a comparison of the 13C and 'H NMR data of a degradation product with the corresponding data of a synthetic compound. It was also established that the modified Moshers method could not be used to determine the absolute stereochemistry of the secondary hydroxy I substituent at C-11. The absolute stereochemistry of 131 was thus assigned in accordance with the proven stereochemistry of Siphonarian metabolites.
- Full Text:
- Date Issued: 1997
An investigation of certain complex ions of trivalent chromium by spectrophotometric and other physical methods
- Authors: Burley, Ralph Walter
- Date: 1950
- Subjects: Chromium
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4521 , http://hdl.handle.net/10962/d1014675
- Description: Although chromium coordination compounds are of considerable technological importance, they have been subjected to few thorough investigations since Werner's original experlments, in spite of the fact that we now possess a number of accurate physical methods, not available in Werner's time for the study of coordination complexes, The object of the work described in this thesis was to obtain further information on the chemistry of complex chromium(III) ions with special reference to the dioxalato-diaquochromiate system, [Cr(C₂0₄)₂(H₂0)₂]. For this purpose; spectrophotometric and potentlometrlc measurements were combined to yield information on a number of topics, The spectrophotometric investigations consisted in measuring the absorption spectra of the potassium salts of the complexes under consideration and in observing the changes in light absorption which occur during their formatlon and decomposition. The instrument used was a Beckmann Quartz Spectrophotometer model du. More than than twelve new absorption spectra were measured in this work and in conjunction with the spectra of other chromium and cobalt complexes reported by earlier workers, these are used to review the position of spectrophotometry as a method of investigating chromium complexes. The reasons for the shapes of the absorption spectra are discussed and it is concluded that spectrophotometry is useful for observing the progress of reactions involving complex ions and for analysing solutions, but that more fundamental data cannot be expected from the absorption curves.
- Full Text:
- Date Issued: 1950
- Authors: Burley, Ralph Walter
- Date: 1950
- Subjects: Chromium
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4521 , http://hdl.handle.net/10962/d1014675
- Description: Although chromium coordination compounds are of considerable technological importance, they have been subjected to few thorough investigations since Werner's original experlments, in spite of the fact that we now possess a number of accurate physical methods, not available in Werner's time for the study of coordination complexes, The object of the work described in this thesis was to obtain further information on the chemistry of complex chromium(III) ions with special reference to the dioxalato-diaquochromiate system, [Cr(C₂0₄)₂(H₂0)₂]. For this purpose; spectrophotometric and potentlometrlc measurements were combined to yield information on a number of topics, The spectrophotometric investigations consisted in measuring the absorption spectra of the potassium salts of the complexes under consideration and in observing the changes in light absorption which occur during their formatlon and decomposition. The instrument used was a Beckmann Quartz Spectrophotometer model du. More than than twelve new absorption spectra were measured in this work and in conjunction with the spectra of other chromium and cobalt complexes reported by earlier workers, these are used to review the position of spectrophotometry as a method of investigating chromium complexes. The reasons for the shapes of the absorption spectra are discussed and it is concluded that spectrophotometry is useful for observing the progress of reactions involving complex ions and for analysing solutions, but that more fundamental data cannot be expected from the absorption curves.
- Full Text:
- Date Issued: 1950
Photophysicochemical properties and surface-enhanced Raman scattering of phthalocyanine-nanoparticle conjugates
- Authors: Nwahara, Nnamdi
- Date: 2019
- Subjects: Boron compounds , Electrochemistry , Phthalocyanines , Nanoparticles , Bioconjugates , Raman effect
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/71647 , vital:29928
- Description: This work presents the synthesis, photophysical and photochemical characterization of a series of metallophthalocyanines (MPcs) and boron dipyrromethene (BODIPY) and their conjugates with either gold or silver nanoparticles (AuNPs or AgNPs) or graphene quantum dots (GQDs). The rich π-electron systems of GQDs and MPcs employed in this work enabled the coordination of MPcs to GQDs (either as pristine or modified) via the non-covalent (π-π stacking) method. GQDs, AuNPs and AgNPs were also functionalized with L-glutathione (GSH) in order to assist coupling to the Pcs or BODIPY dye. Spectroscopic and microscopic studies confirmed the formation of the respective nanoparticles (NPs) as well as the conjugates which exhibited enhanced photophysicochemical properties in comparison to the phthalocyanines (Pcs) or BODIPY alone. This work also shows that the incorporation of folic acid (FA) into Pcs-NPs composites leads to further enhancements in the singlet oxygen generation capabilities of the resulting conjugates, and so experimentally demonstrates for the first time, a synergy between FA and the respective nanoparticles (GQDs, AuNPs and AgNPs) in affecting the photophysical properties of Pcs complexes. GQDs and Pcs/GQDs hybrids were also herein decorated with AuNPs – metallic nanostructures that employ localized surface plasmon resonances to capture or radiate electromagnetic waves at optical frequencies. These nanostructures herein reported, have been shown to possess enhanced light-matter properties, enabling unique surface-enhanced Raman scattering (SERS) behaviours, with unprecedented enhancement factors of up to 30-fold. This work therefore, reports on the fabrication of Pc/GQDs/AuNPs hybrids and experimentally demonstrates their incredible potential as novel Raman-active PDT agents.
- Full Text:
- Date Issued: 2019
- Authors: Nwahara, Nnamdi
- Date: 2019
- Subjects: Boron compounds , Electrochemistry , Phthalocyanines , Nanoparticles , Bioconjugates , Raman effect
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/71647 , vital:29928
- Description: This work presents the synthesis, photophysical and photochemical characterization of a series of metallophthalocyanines (MPcs) and boron dipyrromethene (BODIPY) and their conjugates with either gold or silver nanoparticles (AuNPs or AgNPs) or graphene quantum dots (GQDs). The rich π-electron systems of GQDs and MPcs employed in this work enabled the coordination of MPcs to GQDs (either as pristine or modified) via the non-covalent (π-π stacking) method. GQDs, AuNPs and AgNPs were also functionalized with L-glutathione (GSH) in order to assist coupling to the Pcs or BODIPY dye. Spectroscopic and microscopic studies confirmed the formation of the respective nanoparticles (NPs) as well as the conjugates which exhibited enhanced photophysicochemical properties in comparison to the phthalocyanines (Pcs) or BODIPY alone. This work also shows that the incorporation of folic acid (FA) into Pcs-NPs composites leads to further enhancements in the singlet oxygen generation capabilities of the resulting conjugates, and so experimentally demonstrates for the first time, a synergy between FA and the respective nanoparticles (GQDs, AuNPs and AgNPs) in affecting the photophysical properties of Pcs complexes. GQDs and Pcs/GQDs hybrids were also herein decorated with AuNPs – metallic nanostructures that employ localized surface plasmon resonances to capture or radiate electromagnetic waves at optical frequencies. These nanostructures herein reported, have been shown to possess enhanced light-matter properties, enabling unique surface-enhanced Raman scattering (SERS) behaviours, with unprecedented enhancement factors of up to 30-fold. This work therefore, reports on the fabrication of Pc/GQDs/AuNPs hybrids and experimentally demonstrates their incredible potential as novel Raman-active PDT agents.
- Full Text:
- Date Issued: 2019
Studies in marine quinone chemistry
- Authors: Sunassee, Suthananda Naidu
- Date: 2011
- Subjects: Quinone Marine natural products Marine invertebrates Marine pharmacology Cancer -- Treatment
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4355 , http://hdl.handle.net/10962/d1005020
- Description: This thesis is divided into two parts and the rationale of the research conducted is based on the cytotoxicity of the prenylated quinones 1.24-1.29, isolated from the South African nudibranch Leminda millecra, against oesophageal cancer cells. The first part (Chapters 2 and 3) of the thesis initially documents the distribution of cytotoxic and antioxidant prenylated quinones and hydroquinones in the marine environment. We have been able to show, for the first time, that these compounds can be divided into eight structural classes closely related to their phyletic distribution. Secondly, we attempted to synthesize the two marine natural products 1.24 and 1.26 in an effort to contribute to an ongoing collaborative search with the Division of Medical Biochemistry at the University of Cape Town for new compounds with anti-oesophageal cancer activity. Accordingly, we followed the published synthetic procedure for 1.26 and, although we were unable to reproduce the reported results, we have generated five new prenylated quinone analogues 3.53-3.55, 3.63 and 3.71, which are a potentially viable addition to our ongoing structure-activity relationship (SAR) studies. Moreover, we embarked on a 7Li NMR mechanistic study for the synthesis of 3.2 from 3.1 which rewarded us with an improved and reproducible methodology for this crucial reaction that is detailed in Chapter 3. The second part of this thesis (Chapters 4 and 5) is concerned with a synthetic, structural, electrochemical and biological exploration of the 1,4-naphthoquinone nucleus as a primary pharmacophore in our search for new chemical entities which can induce apoptosis in oesophageal cancer cells, thus contributing to our overall ongoing SAR study in this class of compounds. Seven new naphthoquinone derivatves (4.19, 4.30, 4.31, 4.33 and 4.46-4.48) of the natural products 2-deoxylapachol (2.44), lapachol (4.1) and β-lapachone (5.2) were synthesized and 2-(1`-hydroxy-`-phenylmethyl)-1,4-naphthoquinone (4.29) was found to be the most cytotoxic (IC50 1.5 μM) against the oesophageal cancer cell line WHCO1, while 5.2, which is currently in phase II clinical trials as an anticancer drug, was found to be similarly active (IC50 1.6 μM). Electrochemical investigations of the redox properties of the benzylic alcohol derivatives 4.29-4.31 indicated a higher reduction potential compared to their oxidized counterparts 4.45-4.48, and this finding has been correlated to the increased activity of 4.29-4.31 against the WHCO1 cell line. Additionally, 4.29 is synthetically more accessible than either 1.26 or 5.2 and potentially a lead compound in our search for new and more effective chemotherapeutic agents against oesophageal cancer
- Full Text:
- Date Issued: 2011
- Authors: Sunassee, Suthananda Naidu
- Date: 2011
- Subjects: Quinone Marine natural products Marine invertebrates Marine pharmacology Cancer -- Treatment
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4355 , http://hdl.handle.net/10962/d1005020
- Description: This thesis is divided into two parts and the rationale of the research conducted is based on the cytotoxicity of the prenylated quinones 1.24-1.29, isolated from the South African nudibranch Leminda millecra, against oesophageal cancer cells. The first part (Chapters 2 and 3) of the thesis initially documents the distribution of cytotoxic and antioxidant prenylated quinones and hydroquinones in the marine environment. We have been able to show, for the first time, that these compounds can be divided into eight structural classes closely related to their phyletic distribution. Secondly, we attempted to synthesize the two marine natural products 1.24 and 1.26 in an effort to contribute to an ongoing collaborative search with the Division of Medical Biochemistry at the University of Cape Town for new compounds with anti-oesophageal cancer activity. Accordingly, we followed the published synthetic procedure for 1.26 and, although we were unable to reproduce the reported results, we have generated five new prenylated quinone analogues 3.53-3.55, 3.63 and 3.71, which are a potentially viable addition to our ongoing structure-activity relationship (SAR) studies. Moreover, we embarked on a 7Li NMR mechanistic study for the synthesis of 3.2 from 3.1 which rewarded us with an improved and reproducible methodology for this crucial reaction that is detailed in Chapter 3. The second part of this thesis (Chapters 4 and 5) is concerned with a synthetic, structural, electrochemical and biological exploration of the 1,4-naphthoquinone nucleus as a primary pharmacophore in our search for new chemical entities which can induce apoptosis in oesophageal cancer cells, thus contributing to our overall ongoing SAR study in this class of compounds. Seven new naphthoquinone derivatves (4.19, 4.30, 4.31, 4.33 and 4.46-4.48) of the natural products 2-deoxylapachol (2.44), lapachol (4.1) and β-lapachone (5.2) were synthesized and 2-(1`-hydroxy-`-phenylmethyl)-1,4-naphthoquinone (4.29) was found to be the most cytotoxic (IC50 1.5 μM) against the oesophageal cancer cell line WHCO1, while 5.2, which is currently in phase II clinical trials as an anticancer drug, was found to be similarly active (IC50 1.6 μM). Electrochemical investigations of the redox properties of the benzylic alcohol derivatives 4.29-4.31 indicated a higher reduction potential compared to their oxidized counterparts 4.45-4.48, and this finding has been correlated to the increased activity of 4.29-4.31 against the WHCO1 cell line. Additionally, 4.29 is synthetically more accessible than either 1.26 or 5.2 and potentially a lead compound in our search for new and more effective chemotherapeutic agents against oesophageal cancer
- Full Text:
- Date Issued: 2011
Attempted synthesis of a [beta] or [gamma] resorcinyl alcohol
- Authors: Ryding, William Wallace
- Date: 1952
- Subjects: Alcohol -- Synthesis , Resorcinol
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4517 , http://hdl.handle.net/10962/d1014134
- Description: The ultimate objective of this research is the elucidation of the mechanism of the resorcinol-formaldehyde condensation. Whilst a vast literature has been built up about the phenol- formaldehyde condensation, that of resorcinol has received but scant attention, probably because the high reactivity of resorcinol rendered the following of the condensation extremely difficult. The earliest observation concerning the resorcinol-formaldehyde condensation was due to Baeyer who, in 1872, condensed resorcinol with various aldehydes. When the aldehyde was relatively inactive crystalline compounds were obtalned but with acetaldehyde or formaldehyde a resinous product resulted. In 1892 Caro condensed an excess ot resorcinol with formaldehyde in the presence of dilute hydrochloric acid; the product obtained recrystallised from alcohol as white microsoopic crystals, decomposed without melting at 250° and was stated to be bis (2- 4 dihydroxyphenyl) methane ... In decidlng upon the most suitable lines of attack it would seem that a survey of the literature relating to the phenol-formaldehyde concentration which might be expected to be closely related to that of resorcinol, would be of value. Summary of p. 1-5
- Full Text:
- Date Issued: 1952
- Authors: Ryding, William Wallace
- Date: 1952
- Subjects: Alcohol -- Synthesis , Resorcinol
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4517 , http://hdl.handle.net/10962/d1014134
- Description: The ultimate objective of this research is the elucidation of the mechanism of the resorcinol-formaldehyde condensation. Whilst a vast literature has been built up about the phenol- formaldehyde condensation, that of resorcinol has received but scant attention, probably because the high reactivity of resorcinol rendered the following of the condensation extremely difficult. The earliest observation concerning the resorcinol-formaldehyde condensation was due to Baeyer who, in 1872, condensed resorcinol with various aldehydes. When the aldehyde was relatively inactive crystalline compounds were obtalned but with acetaldehyde or formaldehyde a resinous product resulted. In 1892 Caro condensed an excess ot resorcinol with formaldehyde in the presence of dilute hydrochloric acid; the product obtained recrystallised from alcohol as white microsoopic crystals, decomposed without melting at 250° and was stated to be bis (2- 4 dihydroxyphenyl) methane ... In decidlng upon the most suitable lines of attack it would seem that a survey of the literature relating to the phenol-formaldehyde concentration which might be expected to be closely related to that of resorcinol, would be of value. Summary of p. 1-5
- Full Text:
- Date Issued: 1952
A critical evaluation of the analytical method used for the separation and estimation of copper and nickel
- Authors: Sismey, J E
- Date: 1948
- Subjects: Copper -- Analysis , Nickel -- Analysis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4519 , http://hdl.handle.net/10962/d1014335
- Description: [From Introduction]. This thesis deals with the determination of copper and nickel both separately and in each other's presence. The work is divided into two sections, one of which treats the subject from the theoretical side while the other contains an account of the practical work performed by the author. In the theoretical section, an attempt is made to summarise the better-known methods for the determination of copper and nickel, and at the same time, to incorporate such improvements, criticism and variations as have appeared in the literature. The subject is so vast that its summary in so short a space must necessarily be incomplete. Yoe and Server, for example, quote 111 references on the subject of the nickel-dimethylglyoxine with other ions. Only a fraction of the literature was available, and space permitted only a fraction of this to be abstracted in the following pages.
- Full Text:
- Date Issued: 1948
- Authors: Sismey, J E
- Date: 1948
- Subjects: Copper -- Analysis , Nickel -- Analysis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4519 , http://hdl.handle.net/10962/d1014335
- Description: [From Introduction]. This thesis deals with the determination of copper and nickel both separately and in each other's presence. The work is divided into two sections, one of which treats the subject from the theoretical side while the other contains an account of the practical work performed by the author. In the theoretical section, an attempt is made to summarise the better-known methods for the determination of copper and nickel, and at the same time, to incorporate such improvements, criticism and variations as have appeared in the literature. The subject is so vast that its summary in so short a space must necessarily be incomplete. Yoe and Server, for example, quote 111 references on the subject of the nickel-dimethylglyoxine with other ions. Only a fraction of the literature was available, and space permitted only a fraction of this to be abstracted in the following pages.
- Full Text:
- Date Issued: 1948
Cyclodepsipeptides from a Kenyan marine cyanobacterium
- Authors: Dzeha, Thomas Mwambire
- Date: 2003
- Subjects: Cyanobacteria , Stereochemistry , Natural products -- Kenya
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4303 , http://hdl.handle.net/10962/d1004961 , Cyanobacteria , Stereochemistry , Natural products -- Kenya
- Description: An examination of an organic extract of the cyanobacterium Lyngbya majuscula collected from Wasini Island off the southern Kenyan coast led to the isolation of the known cyclodepsipeptide antanapeptin A (7), recently isolated from a Madagascan collection of L. majuscula, and a new bioactive cyclodepsipeptide, homodolastatin 16 (42). Although L. majuscula is a common, pantropical cyanobacterium this study represents the first investigation of the natural product chemistry of a Kenyan population of L. majuscula. The structures of the two cyclodepsipeptides were determined from 2D NMR and mass spectrometry data. The L- stereochemistry of the proline, valine, and N-methylphenylalanine amino acids in 7 and the L – proline configuration in 42, was confirmed by Marfey’s HPLC method. Chiral GC was used to determine the absolute stereochemistry of the hydroxyisovaleric acid moiety in 7 and 42, the lactate residue in 42 and tentatively propose an L-stereochemistry for the Nmethylisoleucine amino acid in 42. Homodolastatin 16, a higher homologue of the potential anti-cancer agent, dolastatin 16, exhibited moderate activity against two oesophageal cancer cell lines.
- Full Text:
- Date Issued: 2003
- Authors: Dzeha, Thomas Mwambire
- Date: 2003
- Subjects: Cyanobacteria , Stereochemistry , Natural products -- Kenya
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4303 , http://hdl.handle.net/10962/d1004961 , Cyanobacteria , Stereochemistry , Natural products -- Kenya
- Description: An examination of an organic extract of the cyanobacterium Lyngbya majuscula collected from Wasini Island off the southern Kenyan coast led to the isolation of the known cyclodepsipeptide antanapeptin A (7), recently isolated from a Madagascan collection of L. majuscula, and a new bioactive cyclodepsipeptide, homodolastatin 16 (42). Although L. majuscula is a common, pantropical cyanobacterium this study represents the first investigation of the natural product chemistry of a Kenyan population of L. majuscula. The structures of the two cyclodepsipeptides were determined from 2D NMR and mass spectrometry data. The L- stereochemistry of the proline, valine, and N-methylphenylalanine amino acids in 7 and the L – proline configuration in 42, was confirmed by Marfey’s HPLC method. Chiral GC was used to determine the absolute stereochemistry of the hydroxyisovaleric acid moiety in 7 and 42, the lactate residue in 42 and tentatively propose an L-stereochemistry for the Nmethylisoleucine amino acid in 42. Homodolastatin 16, a higher homologue of the potential anti-cancer agent, dolastatin 16, exhibited moderate activity against two oesophageal cancer cell lines.
- Full Text:
- Date Issued: 2003
Application of the Baylis-Hillman reaction in the preparation of quinoline derivatives
- Authors: Pakade, Vusumzi Emmanuel
- Date: 2006 , 2013-06-11
- Subjects: Heterocyclic compounds -- Derivatives , Quinoline
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4442 , http://hdl.handle.net/10962/d1007669 , Heterocyclic compounds -- Derivatives , Quinoline
- Description: The reaction of various 2-nitrobenzaldehyde derivatives with methyl vinyl ketone (MVK) in the presence of 1,4-diazabicyclo[2.2.2]octane (DABCO) has afforded the Baylis-Hillman adducts in moderate to good yield. Dissolution of the catalyst in the solvent before the addition of the aldehyde was observed to improve the yield. Reduction of the Baylis-Hillman adducts was effected by catalytic hydrogenation using a 10% palladium-on- carbon catalyst in ethanol to give quinoline and quinoline-N-oxide derivatives and, in some cases, acyclic reduction products. All products were characterised using NMR and, where appropriate, HRMS methods. Selected quinoline-N-oxides were successfully converted to their corresponding quinoline derivatives using phosphorus tribromide (PBr₃) and DMF as solvent. Conjugate addition of the benzylamine and piperidine nucleophiles to the Baylis-Hillman adducts was also investigated but proved problematic, with one of the substrates undergoing a retro-Baylis-Hillman reaction to afford the aldehyde in ca. 40% yield, but seemingly only traces of the required product. Perkin-type coupling of two 2-methylquinolines with benzaldehyde was successfully effected to afford the desired styrylquinoline derivatives confirming the potential of the Baylis-Hillman approach to the construction of the analogues of known HIV-1 integrase inhibitors. Three ¹³C NMR chemical shift prediction programmes, viz., Chem Window, neural network and HOSE (hierarchically ordered spherical description of environment) methods were applied to selected representative compounds prepared in the project. The results from the three programmes correlated reasonably well with the experimental carbon-13 chemical shift data for each of the selected compounds.
- Full Text:
- Date Issued: 2006
- Authors: Pakade, Vusumzi Emmanuel
- Date: 2006 , 2013-06-11
- Subjects: Heterocyclic compounds -- Derivatives , Quinoline
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4442 , http://hdl.handle.net/10962/d1007669 , Heterocyclic compounds -- Derivatives , Quinoline
- Description: The reaction of various 2-nitrobenzaldehyde derivatives with methyl vinyl ketone (MVK) in the presence of 1,4-diazabicyclo[2.2.2]octane (DABCO) has afforded the Baylis-Hillman adducts in moderate to good yield. Dissolution of the catalyst in the solvent before the addition of the aldehyde was observed to improve the yield. Reduction of the Baylis-Hillman adducts was effected by catalytic hydrogenation using a 10% palladium-on- carbon catalyst in ethanol to give quinoline and quinoline-N-oxide derivatives and, in some cases, acyclic reduction products. All products were characterised using NMR and, where appropriate, HRMS methods. Selected quinoline-N-oxides were successfully converted to their corresponding quinoline derivatives using phosphorus tribromide (PBr₃) and DMF as solvent. Conjugate addition of the benzylamine and piperidine nucleophiles to the Baylis-Hillman adducts was also investigated but proved problematic, with one of the substrates undergoing a retro-Baylis-Hillman reaction to afford the aldehyde in ca. 40% yield, but seemingly only traces of the required product. Perkin-type coupling of two 2-methylquinolines with benzaldehyde was successfully effected to afford the desired styrylquinoline derivatives confirming the potential of the Baylis-Hillman approach to the construction of the analogues of known HIV-1 integrase inhibitors. Three ¹³C NMR chemical shift prediction programmes, viz., Chem Window, neural network and HOSE (hierarchically ordered spherical description of environment) methods were applied to selected representative compounds prepared in the project. The results from the three programmes correlated reasonably well with the experimental carbon-13 chemical shift data for each of the selected compounds.
- Full Text:
- Date Issued: 2006
Studies on the emulsion scouring of raw wool
- Authors: Grové, Christo Carel
- Date: 1963
- Subjects: Woolen and worsted manufacture
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4479 , http://hdl.handle.net/10962/d1012100 , Woolen and worsted manufacture
- Description: Knowledge of the mechanism of detergency under various conditions has thus far been built up from laboratory studies. It is well known that the laboratory methods for determing detergency are on the whole not able to give results which agree with those obtained in practice, probably because the actual scouring conditions cannot be duplicated exactly in the laboratory. Detergency testing on a full industrial scale is virtually impossible in view of the high cost and the production losses involved. In commercial raw wool scouring, which is an extremely complex system, it would be very difficult to exercise proper and complete control. The study described here was carried out on a specially constructed pilot plant which is similar to a fullscale plant in that the lengths of the bowls are of the same order as those of industrial plants, but they are considerably narrower. The trials were carried out under strictly controlled conditions in which the effects to be studied were created by the necessary changes while all other factors were kept constant, The pilot plant experiments were planned from indications of laboratory studies and the results were expected to be more comparable with those obtained in industrial practice, The effect of several factors on the scouring of raw wool was studied from the detergent efficiency aspect. The factors investigated were: mechanical action, backflow, temperature and detergency builders. A number of detergents which were selected from the large range which is available were compared with regard to efficiency and economy of scouring. A difficulty which hinders quantitative laboratory work on nonionic detergents is the fact that there is no rapid, accurate method for the estimation of nonionic detergents. The analytical methods which are employed at present are interfered with by virtually all the impurities which are normally present in scouring liquors. Some of the existing methods have been investigated and tested for precision and reproducibility and an attempt was made at establishing a new method. The sorption of nonionic detergents by various substrates has not been fully investigated because of the above reason and also because the amounts of detergent sorbed by most substrates are very small and difficult to determine. Attempts were made at determining the sorption of nonionic detergents onto wool and impurities which are normally found in scouring liquors. A new method for the investigation of "inactivation" of detergent by contaminants present in scouring liquors, which may be regarded as an indirect indication of detergent sorption, was investigated.
- Full Text:
- Date Issued: 1963
- Authors: Grové, Christo Carel
- Date: 1963
- Subjects: Woolen and worsted manufacture
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4479 , http://hdl.handle.net/10962/d1012100 , Woolen and worsted manufacture
- Description: Knowledge of the mechanism of detergency under various conditions has thus far been built up from laboratory studies. It is well known that the laboratory methods for determing detergency are on the whole not able to give results which agree with those obtained in practice, probably because the actual scouring conditions cannot be duplicated exactly in the laboratory. Detergency testing on a full industrial scale is virtually impossible in view of the high cost and the production losses involved. In commercial raw wool scouring, which is an extremely complex system, it would be very difficult to exercise proper and complete control. The study described here was carried out on a specially constructed pilot plant which is similar to a fullscale plant in that the lengths of the bowls are of the same order as those of industrial plants, but they are considerably narrower. The trials were carried out under strictly controlled conditions in which the effects to be studied were created by the necessary changes while all other factors were kept constant, The pilot plant experiments were planned from indications of laboratory studies and the results were expected to be more comparable with those obtained in industrial practice, The effect of several factors on the scouring of raw wool was studied from the detergent efficiency aspect. The factors investigated were: mechanical action, backflow, temperature and detergency builders. A number of detergents which were selected from the large range which is available were compared with regard to efficiency and economy of scouring. A difficulty which hinders quantitative laboratory work on nonionic detergents is the fact that there is no rapid, accurate method for the estimation of nonionic detergents. The analytical methods which are employed at present are interfered with by virtually all the impurities which are normally present in scouring liquors. Some of the existing methods have been investigated and tested for precision and reproducibility and an attempt was made at establishing a new method. The sorption of nonionic detergents by various substrates has not been fully investigated because of the above reason and also because the amounts of detergent sorbed by most substrates are very small and difficult to determine. Attempts were made at determining the sorption of nonionic detergents onto wool and impurities which are normally found in scouring liquors. A new method for the investigation of "inactivation" of detergent by contaminants present in scouring liquors, which may be regarded as an indirect indication of detergent sorption, was investigated.
- Full Text:
- Date Issued: 1963
Characterization and application of phthalocyanine-gold nanoparticle conjugates
- Authors: Tombe, Sekai Lana
- Date: 2013
- Subjects: Phthalocyanines , Gold , Zinc , Nanoparticles , Bioconjugates , Photochemistry , Photocatalysis , Electrospinning , Polymers , Pollutants , Phenols , Azo dyes
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4293 , http://hdl.handle.net/10962/d1004517 , Phthalocyanines , Gold , Zinc , Nanoparticles , Bioconjugates , Photochemistry , Photocatalysis , Electrospinning , Polymers , Pollutants , Phenols , Azo dyes
- Description: This work presents the syntheses, photophysical and photochemical characterization of arylthio zinc phthalocyanines and their gold nanoparticle conjugates. Spectroscopic and microscopic studies confirmed the formation of the phthalocyanine-gold nanoparticle conjugates which exhibited enhanced photophysicochemical properties in comparison to the phthalocyanines. The studies showed that the presence of gold nanoparticles significantly lowered fluorescence quantum yields and lifetimes. However, this interaction did not restrict the formation of excited singlet and triplet states and hence the formation of singlet oxygen required for photocatalysis. The conjugates showed significantly higher singlet oxygen quantum yields and therefore enhanced photocatalytic activity compared to the phthalocyanines. The zinc phthalocyanines and their gold nanoparticle conjugates were successfully incorporated into electrospun polymer fibers. Spectral characteristics of the functionalized electrospun fibers indicated that the phthalocyanines and phthalocyanine-gold nanoparticle conjugates were bound and their integrity was maintained within the polymeric fiber matrices. The photophysical and photochemical properties of the complexes were equally maintained within the electrospun fibers. The functionalized fibers were applied for the photoconversion of 4-chlorophenol and Orange G as model organic pollutants. , Microsoft� Word 2010 , Adobe Acrobat 9.53 Paper Capture Plug-in
- Full Text:
- Date Issued: 2013
- Authors: Tombe, Sekai Lana
- Date: 2013
- Subjects: Phthalocyanines , Gold , Zinc , Nanoparticles , Bioconjugates , Photochemistry , Photocatalysis , Electrospinning , Polymers , Pollutants , Phenols , Azo dyes
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4293 , http://hdl.handle.net/10962/d1004517 , Phthalocyanines , Gold , Zinc , Nanoparticles , Bioconjugates , Photochemistry , Photocatalysis , Electrospinning , Polymers , Pollutants , Phenols , Azo dyes
- Description: This work presents the syntheses, photophysical and photochemical characterization of arylthio zinc phthalocyanines and their gold nanoparticle conjugates. Spectroscopic and microscopic studies confirmed the formation of the phthalocyanine-gold nanoparticle conjugates which exhibited enhanced photophysicochemical properties in comparison to the phthalocyanines. The studies showed that the presence of gold nanoparticles significantly lowered fluorescence quantum yields and lifetimes. However, this interaction did not restrict the formation of excited singlet and triplet states and hence the formation of singlet oxygen required for photocatalysis. The conjugates showed significantly higher singlet oxygen quantum yields and therefore enhanced photocatalytic activity compared to the phthalocyanines. The zinc phthalocyanines and their gold nanoparticle conjugates were successfully incorporated into electrospun polymer fibers. Spectral characteristics of the functionalized electrospun fibers indicated that the phthalocyanines and phthalocyanine-gold nanoparticle conjugates were bound and their integrity was maintained within the polymeric fiber matrices. The photophysical and photochemical properties of the complexes were equally maintained within the electrospun fibers. The functionalized fibers were applied for the photoconversion of 4-chlorophenol and Orange G as model organic pollutants. , Microsoft� Word 2010 , Adobe Acrobat 9.53 Paper Capture Plug-in
- Full Text:
- Date Issued: 2013
Application of Baylis-Hillman methodology in the synthesis of HIV-1 enzyme inhibitors
- Authors: Manyeruke, Meloddy Hlatini
- Date: 2015
- Subjects: HIV infections , Enzyme inhibitors , AZT (Drug) , Bioconjugates
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4540 , http://hdl.handle.net/10962/d1017920
- Description: The application of Baylis-Hillman methodology has afforded access to a range of β-hydroxypropionate ester-AZT conjugates as potential dual-action HIV-1 IN/RT inhibitors. Two families comprising a total of nine β-hydroxypropionate ester-AZT conjugates were synthesised. The first family was accessed using O-benzylated salicylaldehydes and methyl acrylate and the second from unprotected salicylaldehydes using tert-butyl acrylate as the activated alkene. Spectroscopic methods were employed to fully characterize the compounds. Propargylation of the respective Baylis-Hillman adducts was achieved via conjugate addition of propargylamine. The resulting products were then employed in Cu(I)-catalysed “click” reactions with azidothymidine (AZT) to yield the desired β-hydroxypropionate ester-AZT conjugates. Exploratory studies were also conducted to access 4-hydroxycoumarins from Baylis-Hillman derived adducts and to construct customized chiral Baylis-Hillman reaction sites. Many 4- hydroxycoumarins are known to exhibit a wide range of biological activities, and extending Baylis-Hillman methodology to access these systems is an important challenge. Two approaches were investigated. The first involved the formation of a 4-phthalimidocoumarin, aromatisation and hydrolysis of which was expected to lead to the 4-hydroxycoumarin target. The second, a variation of the first, involved the use of 4-(chrolomethyl)coumarin intermediates. Unfortunately, while various intermediates were prepared and characterised, neither approach led ultimately to the desired targets. N-substituted borneol-10-sulfonamides were constructed from camphor-10- sulfonyl chloride as chiral Baylis-Hillman reaction sites. In a preliminary study, however, none of the N-substituted borneol-10-sulfonamides exhibited Baylis-Hillman catalytic activity.
- Full Text:
- Date Issued: 2015
- Authors: Manyeruke, Meloddy Hlatini
- Date: 2015
- Subjects: HIV infections , Enzyme inhibitors , AZT (Drug) , Bioconjugates
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4540 , http://hdl.handle.net/10962/d1017920
- Description: The application of Baylis-Hillman methodology has afforded access to a range of β-hydroxypropionate ester-AZT conjugates as potential dual-action HIV-1 IN/RT inhibitors. Two families comprising a total of nine β-hydroxypropionate ester-AZT conjugates were synthesised. The first family was accessed using O-benzylated salicylaldehydes and methyl acrylate and the second from unprotected salicylaldehydes using tert-butyl acrylate as the activated alkene. Spectroscopic methods were employed to fully characterize the compounds. Propargylation of the respective Baylis-Hillman adducts was achieved via conjugate addition of propargylamine. The resulting products were then employed in Cu(I)-catalysed “click” reactions with azidothymidine (AZT) to yield the desired β-hydroxypropionate ester-AZT conjugates. Exploratory studies were also conducted to access 4-hydroxycoumarins from Baylis-Hillman derived adducts and to construct customized chiral Baylis-Hillman reaction sites. Many 4- hydroxycoumarins are known to exhibit a wide range of biological activities, and extending Baylis-Hillman methodology to access these systems is an important challenge. Two approaches were investigated. The first involved the formation of a 4-phthalimidocoumarin, aromatisation and hydrolysis of which was expected to lead to the 4-hydroxycoumarin target. The second, a variation of the first, involved the use of 4-(chrolomethyl)coumarin intermediates. Unfortunately, while various intermediates were prepared and characterised, neither approach led ultimately to the desired targets. N-substituted borneol-10-sulfonamides were constructed from camphor-10- sulfonyl chloride as chiral Baylis-Hillman reaction sites. In a preliminary study, however, none of the N-substituted borneol-10-sulfonamides exhibited Baylis-Hillman catalytic activity.
- Full Text:
- Date Issued: 2015
Pre-concentration of heavy metals in aqueous environments using electrospun polymer nanofiber sorbents
- Authors: Darko, Godfred
- Date: 2012
- Subjects: Heavy metals -- Absorption and adsorption -- Research Nanochemistry -- Research Polystyrene -- Research Polyamides -- Research
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4337 , http://hdl.handle.net/10962/d1004998
- Description: This thesis presents an alternative approach for pre-concentrating heavy metals in aqueous environments using electro spun polymer nanofiber sorbents. The conditions for electrospinning polyethersulfone, polystyrene, polysulfone and polyamide-6 were optimized. The morphologies and porosities of the electrospun nanofibers were studied using SEM and BET nitrogen gas adsorptions. The nanofibers had mesoporous morphologies with specific surface areas up to 58 m2/g. The electro spun nanofiber sorbents were characterized in terms of their tunability for both uptake and release of heavy metals. The usability of the sorbent was also assessed. The sorbents showed fast adsorption kinetics for heavy metals « 20 min for As, Cu, Ni and Pb) in different aqueous environments. The adsorption characteristics of the sorbents best fitted the Freundlich isotherm and followed the first order kinetics. The efficiencies of adsorption and desorption of heavy metals on both imidazolyl-functionalized polystyrene and amino-functionalized polysulfone sorbents were more than 95% up to the fifth cycle of usage. Reusability improved dramatically (up to 10 runs of usage) when mechanically stable amino-functionalized nylon-6 electro spun nanofibers were used. The capacity of the amino-functionalized nylon-6 sorbent to pre-concentrate heavy metals compared very favourably with those of aqua regia and HN03+H202 digestions especially in less complex matrices. Due to their highly porous nature, the electro spun nanofibers exhibited high adsorption capacities (up to 50 mg/g) for heavy metal ions. The loading capacities achieved with the imidazolyl-functionalized sorbent were higher than those for amino-functionalized mesoporous silica and biomass-based sorbents. The electro spun nanofiber sorbents presents an efficient and cost effective alternative for preconcentrating heavy metals in aqueous environments.
- Full Text:
- Date Issued: 2012
- Authors: Darko, Godfred
- Date: 2012
- Subjects: Heavy metals -- Absorption and adsorption -- Research Nanochemistry -- Research Polystyrene -- Research Polyamides -- Research
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4337 , http://hdl.handle.net/10962/d1004998
- Description: This thesis presents an alternative approach for pre-concentrating heavy metals in aqueous environments using electro spun polymer nanofiber sorbents. The conditions for electrospinning polyethersulfone, polystyrene, polysulfone and polyamide-6 were optimized. The morphologies and porosities of the electrospun nanofibers were studied using SEM and BET nitrogen gas adsorptions. The nanofibers had mesoporous morphologies with specific surface areas up to 58 m2/g. The electro spun nanofiber sorbents were characterized in terms of their tunability for both uptake and release of heavy metals. The usability of the sorbent was also assessed. The sorbents showed fast adsorption kinetics for heavy metals « 20 min for As, Cu, Ni and Pb) in different aqueous environments. The adsorption characteristics of the sorbents best fitted the Freundlich isotherm and followed the first order kinetics. The efficiencies of adsorption and desorption of heavy metals on both imidazolyl-functionalized polystyrene and amino-functionalized polysulfone sorbents were more than 95% up to the fifth cycle of usage. Reusability improved dramatically (up to 10 runs of usage) when mechanically stable amino-functionalized nylon-6 electro spun nanofibers were used. The capacity of the amino-functionalized nylon-6 sorbent to pre-concentrate heavy metals compared very favourably with those of aqua regia and HN03+H202 digestions especially in less complex matrices. Due to their highly porous nature, the electro spun nanofibers exhibited high adsorption capacities (up to 50 mg/g) for heavy metal ions. The loading capacities achieved with the imidazolyl-functionalized sorbent were higher than those for amino-functionalized mesoporous silica and biomass-based sorbents. The electro spun nanofiber sorbents presents an efficient and cost effective alternative for preconcentrating heavy metals in aqueous environments.
- Full Text:
- Date Issued: 2012
Soil erosion in South Africa
- Authors: Kitto, P H
- Date: 1936
- Subjects: Uncatalogued
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/193679 , vital:45385
- Description: The development of Soil Science in western Europe, eastern North America, and later in other countries, which, in its modern form only started about the beginning of the last century, might be said to mark the first step in the consideration of Soil Erosion from a scientific aspect, although it was some time before scientists began to concentrate on and study the problem as one which demanded a detailed investigation. Empirically, erosion has been noted and, where the value of the land warranted it, practical methods adopted for its control, in many cases with no small measure of success, for centuries, but the methods adopted were localised to small regions, and the major destruction went on unchecked. The seriousness of this destruction was usually not realised until too late, and striking examples exist of the complete desiccation resulting from this neglect. Those of China, Arabia, Mesopotamia and other countries have often been quoted, and need not be described again here. , Thesis (MSc) -- Faculty of Science, Chemistry, 1936
- Full Text:
- Date Issued: 1936
- Authors: Kitto, P H
- Date: 1936
- Subjects: Uncatalogued
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/193679 , vital:45385
- Description: The development of Soil Science in western Europe, eastern North America, and later in other countries, which, in its modern form only started about the beginning of the last century, might be said to mark the first step in the consideration of Soil Erosion from a scientific aspect, although it was some time before scientists began to concentrate on and study the problem as one which demanded a detailed investigation. Empirically, erosion has been noted and, where the value of the land warranted it, practical methods adopted for its control, in many cases with no small measure of success, for centuries, but the methods adopted were localised to small regions, and the major destruction went on unchecked. The seriousness of this destruction was usually not realised until too late, and striking examples exist of the complete desiccation resulting from this neglect. Those of China, Arabia, Mesopotamia and other countries have often been quoted, and need not be described again here. , Thesis (MSc) -- Faculty of Science, Chemistry, 1936
- Full Text:
- Date Issued: 1936
Oxidative desulfurization of fuel oils-catalytic oxidation and adsorptive removal of organosulfur compounds
- Authors: Ogunlaja, Adeniyi Sunday
- Date: 2014
- Subjects: Organosulfur compounds , Organosulfur compounds -- Oxidation , Organosulfur compounds -- Absorption and adsorption , Petroleum as fuel , Catalysis , Imprinted polymers , Molecular imprinting , Nanofibers , Electrospinning
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4498 , http://hdl.handle.net/10962/d1013152
- Description: The syntheses and evaluation of oxidovanadium(IV) complexes as catalysts for the oxidation of refractory organosulfur compounds in fuels is presented. The sulfones produced from the oxidation reaction were removed from fuel oils by employing molecularly imprinted polymers (MIPs). The oxidovanadium(IV) homogeneous catalyst, [V ͥ ͮ O(sal-HBPD)], as well as its heterogeneous polymer supported derivatives, poly[V ͥ ͮ O(sal-AHBPD)] and poly[V ͥ ͮ O(allylSB-co-EGDMA)], were synthesized and fully characterized by elemental analysis, FTIR, UV-Vis, XPS, AFM, SEM, BET and single crystal XRD for [V ͥ ͮ O(sal-HBPD)]. The MIPs were also characterized by elemental analysis, FTIR, SEM, EDX and BET. The catalyzed oxidation of fuel oil model sulfur compounds, thiophene (TH), benzothiophene (BT), dibenzothiophene (DBT) and 4,6-dimethyldibenzothiophene (4,6-DMDBT), was conducted under batch and continuous flow processes at 40°C by using tert-butylhydroperoxide (t-BuOOH) as oxidant. The continuous flow oxidation process presented the highest overall conversions and very high selectivity for sulfones. Maximum oxidation conversions of 71%, 89%, 99% and 88% was achieved for TH, BT, DBT and 4,6-DMDBT respectively when poly[V ͥ ͮ O(allylSB-co-EGDMA)] was employed at a flow-rate of 1 mL/h with over 90% sulfone selectivity. The process was further applied to the oxidation of hydro-treated diesel containing 385 ± 4.6 ppm of sulfur (mainly dibenzothiophene and dibenzothiophene derivatives), and this resulted to a high sulfur oxidation yield (> 99%), thus producing polar sulfones which are extractible by polar solid phase extractants. Adsorption of the polar sulfone compounds was carried-out by employing MIPs which were fabricated through the formation of recognition sites complementary to oxidized sulfur-containing compounds (sulfones) on electrospun polybenzimidazole (PBI) nanofibers, cross-linked chitosan microspheres and electrospun chitosan nanofibers. Adsorption of benzothiophene sulfone (BTO₂), dibenzothiophene sulfone (DBTO₂) and 4,6-dimethyldibenzothiophene sulfone (4,6-DMDBTO₂) on the various molecularly imprinted adsorbents presented a Freundlich (multi-layered) adsorption isotherm which indicated interaction of adsorbed organosulfur compounds. Maximum adsorption observed for BTO₂, DBTO₂ and 4,6-DMDBTO₂ respectively was 8.5 ± 0.6 mg/g, 7.0 ± 0.5 mg/g and 6.6 ± 0.7 mg/g when imprinted chitosan nanofibers were employed, 4.9 ± 0.5 mg/g, 4.2 ± 0.7 mg/g and 3.9 ± 0.6 mg/g on molecularly imprinted chitosan microspheres, and 28.5 ± 0.4 mg/g, 29.8 ± 2.2 mg/g and 20.1 ± 1.4 mg/g on molecularly imprinted PBI nanofibers. Application of electrospun chitosan nanofibers on oxidized hydro-treated diesel presented a sulfur removal capacity of 84%, leaving 62 ± 3.2 ppm S in the fuel, while imprinted PBI electrospun nanofibers displayed excellent sulfur removal, keeping sulfur in the fuel after the oxidation/adsorption below the determined limit of detection (LOD), which is 2.4 ppm S. The high level of sulfur removal displayed by imprinted PBI nanofibers was ascribed to hydrogen bonding effects, and π-π stacking between aromatic sulfone compounds and the benzimidazole ring which were confirmed by chemical modelling with density functional theory (DFT) as well as the imprinting effect. The home-made pressurized hot water extraction (PHWE) system was applied for extraction/desorption of sulfone compounds adsorbed on the PBI nanofibers at a flow rate of 1 mL/min and at 150°C with an applied pressure of 30 bars. Application of molecularly imprinted PBI nanofibers for the desulfurization of oxidized hydro-treated fuel showed potential for use in refining industries to reach ultra-low sulfur fuel level, which falls below the 10 ppm sulfur limit which is mandated by the environmental protection agency (EPA) from 2015.
- Full Text:
- Date Issued: 2014
- Authors: Ogunlaja, Adeniyi Sunday
- Date: 2014
- Subjects: Organosulfur compounds , Organosulfur compounds -- Oxidation , Organosulfur compounds -- Absorption and adsorption , Petroleum as fuel , Catalysis , Imprinted polymers , Molecular imprinting , Nanofibers , Electrospinning
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4498 , http://hdl.handle.net/10962/d1013152
- Description: The syntheses and evaluation of oxidovanadium(IV) complexes as catalysts for the oxidation of refractory organosulfur compounds in fuels is presented. The sulfones produced from the oxidation reaction were removed from fuel oils by employing molecularly imprinted polymers (MIPs). The oxidovanadium(IV) homogeneous catalyst, [V ͥ ͮ O(sal-HBPD)], as well as its heterogeneous polymer supported derivatives, poly[V ͥ ͮ O(sal-AHBPD)] and poly[V ͥ ͮ O(allylSB-co-EGDMA)], were synthesized and fully characterized by elemental analysis, FTIR, UV-Vis, XPS, AFM, SEM, BET and single crystal XRD for [V ͥ ͮ O(sal-HBPD)]. The MIPs were also characterized by elemental analysis, FTIR, SEM, EDX and BET. The catalyzed oxidation of fuel oil model sulfur compounds, thiophene (TH), benzothiophene (BT), dibenzothiophene (DBT) and 4,6-dimethyldibenzothiophene (4,6-DMDBT), was conducted under batch and continuous flow processes at 40°C by using tert-butylhydroperoxide (t-BuOOH) as oxidant. The continuous flow oxidation process presented the highest overall conversions and very high selectivity for sulfones. Maximum oxidation conversions of 71%, 89%, 99% and 88% was achieved for TH, BT, DBT and 4,6-DMDBT respectively when poly[V ͥ ͮ O(allylSB-co-EGDMA)] was employed at a flow-rate of 1 mL/h with over 90% sulfone selectivity. The process was further applied to the oxidation of hydro-treated diesel containing 385 ± 4.6 ppm of sulfur (mainly dibenzothiophene and dibenzothiophene derivatives), and this resulted to a high sulfur oxidation yield (> 99%), thus producing polar sulfones which are extractible by polar solid phase extractants. Adsorption of the polar sulfone compounds was carried-out by employing MIPs which were fabricated through the formation of recognition sites complementary to oxidized sulfur-containing compounds (sulfones) on electrospun polybenzimidazole (PBI) nanofibers, cross-linked chitosan microspheres and electrospun chitosan nanofibers. Adsorption of benzothiophene sulfone (BTO₂), dibenzothiophene sulfone (DBTO₂) and 4,6-dimethyldibenzothiophene sulfone (4,6-DMDBTO₂) on the various molecularly imprinted adsorbents presented a Freundlich (multi-layered) adsorption isotherm which indicated interaction of adsorbed organosulfur compounds. Maximum adsorption observed for BTO₂, DBTO₂ and 4,6-DMDBTO₂ respectively was 8.5 ± 0.6 mg/g, 7.0 ± 0.5 mg/g and 6.6 ± 0.7 mg/g when imprinted chitosan nanofibers were employed, 4.9 ± 0.5 mg/g, 4.2 ± 0.7 mg/g and 3.9 ± 0.6 mg/g on molecularly imprinted chitosan microspheres, and 28.5 ± 0.4 mg/g, 29.8 ± 2.2 mg/g and 20.1 ± 1.4 mg/g on molecularly imprinted PBI nanofibers. Application of electrospun chitosan nanofibers on oxidized hydro-treated diesel presented a sulfur removal capacity of 84%, leaving 62 ± 3.2 ppm S in the fuel, while imprinted PBI electrospun nanofibers displayed excellent sulfur removal, keeping sulfur in the fuel after the oxidation/adsorption below the determined limit of detection (LOD), which is 2.4 ppm S. The high level of sulfur removal displayed by imprinted PBI nanofibers was ascribed to hydrogen bonding effects, and π-π stacking between aromatic sulfone compounds and the benzimidazole ring which were confirmed by chemical modelling with density functional theory (DFT) as well as the imprinting effect. The home-made pressurized hot water extraction (PHWE) system was applied for extraction/desorption of sulfone compounds adsorbed on the PBI nanofibers at a flow rate of 1 mL/min and at 150°C with an applied pressure of 30 bars. Application of molecularly imprinted PBI nanofibers for the desulfurization of oxidized hydro-treated fuel showed potential for use in refining industries to reach ultra-low sulfur fuel level, which falls below the 10 ppm sulfur limit which is mandated by the environmental protection agency (EPA) from 2015.
- Full Text:
- Date Issued: 2014
Evaluation of metallophthalocyanine functionalized photocatalytic asymmetric polymer membranes for pollution control and antimicrobial activity
- Mafukidze, Donovan Musizvinoda Chidyamurimi
- Authors: Mafukidze, Donovan Musizvinoda Chidyamurimi
- Date: 2021
- Subjects: Photosensitizing compounds , Water -- Purification -- Photocatalysis , Phthalocyanines , Polymeric membranes , Porphyrins
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/171357 , vital:42052 , 10.21504/10962/171357
- Description: The conceptualisation of photosensitizing water treatment polymer membranes using phthalocyanine based photosensitizers is reported in this thesis. The key to successful preparation of stable photoactive polymer membranes was established as the covalent anchorage of the photosensitizer to a polymer, which was proven by singlet oxygen generation by the membranes without photosensitizer deterioration. Despite this limitation, the covalent linkage-incapable unsubstituted zinc (II) phthalocyanine (complex 2) was applied as a nanoconjugate of graphene quantum dots (2π(GQDs)). 2π(GQDs) was formed through π-π stacking, and was then covalently anchored, as a proof of concept. This concept was also applied to 2-(4-carboxyphenoxy) phthalocyaninato zinc (II) (complex 3) which is capable of covalent linkage but proved to deteriorate the efficiency of singlet oxygen formation with comparison to the covalent conjugates. Singlet oxygen generation by functionalized polymer membranes rendered them photocatalytic in the degradation of organic pollutants and microorganisms in water. Organic pollutant degradation capability was exemplified by 2π(GQDs) and a porphyrin-phthalocyanine heterodyad (complex 10) functionalized membranes (2π(GQDs)-memb and 10-memb respectively), where a MPc loading of approximately 0.139 μmol MPc/g of membrane was able to achieve a 4-chlorophenol degradation rate of 3.77 × 10−6 mol L−1 min−1 in a second order reaction with an initial 4-chlorophenol concentration of 3.24 × 10−4 mol L−1 for 2π(GQDs)-memb as an example. Antibacterial studies against S.aureus using a quaternized MPc and conjugates of silver triangular nanoprisms with zinc (II) and indium (III) MPcs showed note-worthy improvements in photodynamic antimicrobial chemotherapy (PACT) activity in comparison to the unquaternized MPc precursor, and the free zinc and indium MPcs respectively. Functionalization of polymer membranes with these higher activity photosensitizers translated to the formation of potentially superior biological fouling resistant membranes. The use of porphyrin-phthalocyanine polynuclei arrays (complex 10) in polymer membrane functionalization resulted in the use of a wider wavelength range (white light). The findings from this work as a whole, thus presents the potential applicability of phthalocyanine functionalized polymer membranes in water treatment technology.
- Full Text:
- Date Issued: 2021
- Authors: Mafukidze, Donovan Musizvinoda Chidyamurimi
- Date: 2021
- Subjects: Photosensitizing compounds , Water -- Purification -- Photocatalysis , Phthalocyanines , Polymeric membranes , Porphyrins
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/171357 , vital:42052 , 10.21504/10962/171357
- Description: The conceptualisation of photosensitizing water treatment polymer membranes using phthalocyanine based photosensitizers is reported in this thesis. The key to successful preparation of stable photoactive polymer membranes was established as the covalent anchorage of the photosensitizer to a polymer, which was proven by singlet oxygen generation by the membranes without photosensitizer deterioration. Despite this limitation, the covalent linkage-incapable unsubstituted zinc (II) phthalocyanine (complex 2) was applied as a nanoconjugate of graphene quantum dots (2π(GQDs)). 2π(GQDs) was formed through π-π stacking, and was then covalently anchored, as a proof of concept. This concept was also applied to 2-(4-carboxyphenoxy) phthalocyaninato zinc (II) (complex 3) which is capable of covalent linkage but proved to deteriorate the efficiency of singlet oxygen formation with comparison to the covalent conjugates. Singlet oxygen generation by functionalized polymer membranes rendered them photocatalytic in the degradation of organic pollutants and microorganisms in water. Organic pollutant degradation capability was exemplified by 2π(GQDs) and a porphyrin-phthalocyanine heterodyad (complex 10) functionalized membranes (2π(GQDs)-memb and 10-memb respectively), where a MPc loading of approximately 0.139 μmol MPc/g of membrane was able to achieve a 4-chlorophenol degradation rate of 3.77 × 10−6 mol L−1 min−1 in a second order reaction with an initial 4-chlorophenol concentration of 3.24 × 10−4 mol L−1 for 2π(GQDs)-memb as an example. Antibacterial studies against S.aureus using a quaternized MPc and conjugates of silver triangular nanoprisms with zinc (II) and indium (III) MPcs showed note-worthy improvements in photodynamic antimicrobial chemotherapy (PACT) activity in comparison to the unquaternized MPc precursor, and the free zinc and indium MPcs respectively. Functionalization of polymer membranes with these higher activity photosensitizers translated to the formation of potentially superior biological fouling resistant membranes. The use of porphyrin-phthalocyanine polynuclei arrays (complex 10) in polymer membrane functionalization resulted in the use of a wider wavelength range (white light). The findings from this work as a whole, thus presents the potential applicability of phthalocyanine functionalized polymer membranes in water treatment technology.
- Full Text:
- Date Issued: 2021
Synthesis, characterisation and biological evaluation of novel anti-infective compounds bearing ferrocene, arylpyrrole, thiazolidinedione, quinoline and triazole moieties
- Authors: Oderinlo, Ogunyemi Olajide
- Date: 2019
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/114714 , vital:34016 , 10.21504/10962/114714
- Description: Expected release date-April 2022
- Full Text: false
- Date Issued: 2019
- Authors: Oderinlo, Ogunyemi Olajide
- Date: 2019
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/114714 , vital:34016 , 10.21504/10962/114714
- Description: Expected release date-April 2022
- Full Text: false
- Date Issued: 2019