Synthetic and physical organic studies of chromone derivatives
- Ramaite, Ipfani David Isaiah
- Authors: Ramaite, Ipfani David Isaiah
- Date: 1997
- Subjects: Benzopyrans Heterocyclic compounds -- Derivatives Coumarins
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4380 , http://hdl.handle.net/10962/d1005045
- Description: A range of chromone-2-carboxylic acids has been prepared by condensing suitably substituted 2-hydroxyacetophenones with diethyl oxalate. pK₂ Studies of these acids revealed that 6- or 7-methoxy substituents decreased acidity while the 6-nitro group enhanced acidity; the strongest acid was the 3-chloro derivative, the increase in acidity being attributed to steric inhibition of acid-weakening delocalisation between the carboxyl group and the chromone system. Various chromone-2-carboxamides, derived from acid chloride precursors, were converted to polysubstituted acrylamides by nucleophilic ring-opening with selected amine nucleophiles. The main fragmentation patterns exhibited by these acrylamides were elucidated using a combination of low resolution, high resolution and meta-stable peak analysis, while the effect of substituents on the simultaneous internal rotation involving the carboxamide and enamine moieties were studied using dynamic NMR spectroscopy. Rotational barriers of ca. 67.1 kJmol ̄¹ and ca. 102 kJmol ̄¹ were found for the enamine and amide rotors, respectively. Several synthetic pathways were followed to prepare a series of 2-(N,N-dialkylamino)chromones which were subjected to detailed mass spectral analysis. In addition to substituent-specific fragmentations , the 2-aminochromones appear to fragment via 3 major pathways. The effect of substituents on the internal rotation of the amino moeity was investigated by variable temperature ¹H NMR spectroscopy and the resulting DNMR data was used to calculate the rotational barriers. Examination of the data reveals that the electron-releasing 6- and 7- substituents reduce the C-NMe₂ rotational barrier to ca. 43.5 kJmol ̄¹ , while the nitro analogue has the largest rotational barrier (ca. 46.1 kJmol ̄¹) because of the electron-withdrawing effect of this substituent.
- Full Text:
- Date Issued: 1997
- Authors: Ramaite, Ipfani David Isaiah
- Date: 1997
- Subjects: Benzopyrans Heterocyclic compounds -- Derivatives Coumarins
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4380 , http://hdl.handle.net/10962/d1005045
- Description: A range of chromone-2-carboxylic acids has been prepared by condensing suitably substituted 2-hydroxyacetophenones with diethyl oxalate. pK₂ Studies of these acids revealed that 6- or 7-methoxy substituents decreased acidity while the 6-nitro group enhanced acidity; the strongest acid was the 3-chloro derivative, the increase in acidity being attributed to steric inhibition of acid-weakening delocalisation between the carboxyl group and the chromone system. Various chromone-2-carboxamides, derived from acid chloride precursors, were converted to polysubstituted acrylamides by nucleophilic ring-opening with selected amine nucleophiles. The main fragmentation patterns exhibited by these acrylamides were elucidated using a combination of low resolution, high resolution and meta-stable peak analysis, while the effect of substituents on the simultaneous internal rotation involving the carboxamide and enamine moieties were studied using dynamic NMR spectroscopy. Rotational barriers of ca. 67.1 kJmol ̄¹ and ca. 102 kJmol ̄¹ were found for the enamine and amide rotors, respectively. Several synthetic pathways were followed to prepare a series of 2-(N,N-dialkylamino)chromones which were subjected to detailed mass spectral analysis. In addition to substituent-specific fragmentations , the 2-aminochromones appear to fragment via 3 major pathways. The effect of substituents on the internal rotation of the amino moeity was investigated by variable temperature ¹H NMR spectroscopy and the resulting DNMR data was used to calculate the rotational barriers. Examination of the data reveals that the electron-releasing 6- and 7- substituents reduce the C-NMe₂ rotational barrier to ca. 43.5 kJmol ̄¹ , while the nitro analogue has the largest rotational barrier (ca. 46.1 kJmol ̄¹) because of the electron-withdrawing effect of this substituent.
- Full Text:
- Date Issued: 1997
An examination of the extractives of Leonotis species
- Authors: Kaplan, Errol R
- Date: 1966
- Subjects: Leonotis -- Analysis Botanical chemistry Chemistry, Analytic Chemistry, Organic
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4481 , http://hdl.handle.net/10962/d1012628
- Description: Marrubiin and the other two diterpenoids, compounds X and Y, which had previously been isolated from Leonotus leonurus have been reinvestigated. Although the structure for marrubiin is well known its stereochemistry has been the subject of protracted discussion and is by no means secure except at C₅ and C₁₀ . N.M.R. spectral evidence showed that the lactone ring was cis-fused and β-orientated. Dehydration experiments carried out by previous workers were repeated, in order to resolve the residual uncertainty regarding the stereochemistry at C₉, an attempt was made to prepare iodoacetyl marrubic acid for X-ray crystallographic studies. Compound Y, C₂₀H₂₈0₃, a triply-unsaturated compound was shown by spectral studies to contain a furan ring and an α,β- unsaturated keto-group. It possesses a hydroxyl group incapable of acetylation, but readily removed by alkali and dehydrating agents to yield a tetraunsaturated compound, anhydro~Y; the hydroxyl is thus tertiary, Isolation of 1:2:5-trimethylnaphthalene on dehydrogenation indicated a relationship with the labdane diterpene group and supported the C₂₀ formula, The position of the α,β-unsaturated keto-group was resolved by interpretation of the ultraviolet spectra of degradation products and also by isolation of 1:2:3:5- trimethylnaphthalene on dehydrogenation of a suitable grignard product, The presence of a β-substituted furan was further indicated by colour reactions and confirmed by mass and n.m.r. spectra. The skeleton of compound Y is correlated with marrubiin via "iso-ambreinolide " and its stereochemistry is discussed. Further stereochemical assignments are postulated from the study of the n.m.r. spectra. Compound X, C₂₀H₂₈0₅, was shown by spectral and chemical evidence to be a diterpenoid dilactone containing an ether bridge between C₉ and C₁₃ Isolation of 1:2:5 trimethylnaphthal ene on dehydrogenation showed it to be closely related to marrubiin, This was supported by n.m.r. spectral results. A structure for compound X is proposed and the stereochemistry discussed. The aerial portions of Leonotis leonitis were also extracted and shown to contain a new compound, compound R. Preliminary investigation showed that it was a dilactone containing a furan ring, The n.m.r. spectrum of the compound is discussed.
- Full Text:
- Date Issued: 1966
- Authors: Kaplan, Errol R
- Date: 1966
- Subjects: Leonotis -- Analysis Botanical chemistry Chemistry, Analytic Chemistry, Organic
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4481 , http://hdl.handle.net/10962/d1012628
- Description: Marrubiin and the other two diterpenoids, compounds X and Y, which had previously been isolated from Leonotus leonurus have been reinvestigated. Although the structure for marrubiin is well known its stereochemistry has been the subject of protracted discussion and is by no means secure except at C₅ and C₁₀ . N.M.R. spectral evidence showed that the lactone ring was cis-fused and β-orientated. Dehydration experiments carried out by previous workers were repeated, in order to resolve the residual uncertainty regarding the stereochemistry at C₉, an attempt was made to prepare iodoacetyl marrubic acid for X-ray crystallographic studies. Compound Y, C₂₀H₂₈0₃, a triply-unsaturated compound was shown by spectral studies to contain a furan ring and an α,β- unsaturated keto-group. It possesses a hydroxyl group incapable of acetylation, but readily removed by alkali and dehydrating agents to yield a tetraunsaturated compound, anhydro~Y; the hydroxyl is thus tertiary, Isolation of 1:2:5-trimethylnaphthalene on dehydrogenation indicated a relationship with the labdane diterpene group and supported the C₂₀ formula, The position of the α,β-unsaturated keto-group was resolved by interpretation of the ultraviolet spectra of degradation products and also by isolation of 1:2:3:5- trimethylnaphthalene on dehydrogenation of a suitable grignard product, The presence of a β-substituted furan was further indicated by colour reactions and confirmed by mass and n.m.r. spectra. The skeleton of compound Y is correlated with marrubiin via "iso-ambreinolide " and its stereochemistry is discussed. Further stereochemical assignments are postulated from the study of the n.m.r. spectra. Compound X, C₂₀H₂₈0₅, was shown by spectral and chemical evidence to be a diterpenoid dilactone containing an ether bridge between C₉ and C₁₃ Isolation of 1:2:5 trimethylnaphthal ene on dehydrogenation showed it to be closely related to marrubiin, This was supported by n.m.r. spectral results. A structure for compound X is proposed and the stereochemistry discussed. The aerial portions of Leonotis leonitis were also extracted and shown to contain a new compound, compound R. Preliminary investigation showed that it was a dilactone containing a furan ring, The n.m.r. spectrum of the compound is discussed.
- Full Text:
- Date Issued: 1966
Synthesis and evaluation of the medicinal potential of novel 4-hydroxycoumarin derivatives
- Authors: Manyeruke, Meloddy Hlatini
- Date: 2022-04-08
- Subjects: Uncatalogued
- Language: English
- Type: Academic theses , Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/164458 , vital:41120 , doi:10.21504/10962/164458
- Description: This research has focused on the synthesis and biological evaluation of a broad range of compounds characterised by the presence of the pharmacologically significant 4-hydroxycoumalin scaffold. The compounds were designed to contain additional pharmachophoric centres to enhance bioactivity and generate lead compounds with dualaction potential. The use of 4-hydroxycoumarin as the primary synthon enabled access to various series of 4-hydroxycoumarin conjugates, the reactive 3-position on the 4-hydroxycoumarin moiety being exploited for regioselective construction of the targeted compounds in several steps. Some of the reactants required in the construction of these compounds were specially synthesised and included propargyloxy benzaldehydes, benzyloxy benzaldehydes and 2,3-dihydroxysuccino-dihydride. Overall, eight different families of novel compounds were accessed, comprising conjugates of 4-hydroxycoumarin with bisethylidenesuccinohyrazide, trifluoroacetamide, amino, benzyloxyphenyl-iminoethyl, benzylidenehyrazinyl-thiazoyl, benzylidenehydrazonoethyl, propargyloxybenzylidenehydrazonoethyl and phenylacryloyl moieties using protocols that required minimal work-up and purification. The eighty novel compounds synthesised in the study were fully characterised using HMRS and advanced NMR techniques. Cytotoxicity, HIV-1 IN and PR inhibitory, and antitrypanosomal, antimalarial and anti-Mtb assays were conducted on the synthesised coumarin derivatives. Several compounds exhibited activity against HIV-1 IN, the most potent being a bis-ethylidenesuccinohyrazide with an IC50 value of 3.5 μM. Various compounds exhibited anti-malarial activity (% pLDH viability in the range 62-77%), anti-trypanosomal activity (the most potent with an IC50 = 0.9 μM against T.b. brucei) and a measure of anti-Mtb activity. Apart from two chalconyl derivatives, none of the synthesised compounds exhibited significant cytotoxicity. Conflicting results were obtained from the in silico docking studies; in some cases supporting the observed in vitro assay data while, in others, exhibiting no correlation. , Thesis (PhD) -- Faculty of Science, Chemistry, 2020
- Full Text:
- Date Issued: 2022-04-08
- Authors: Manyeruke, Meloddy Hlatini
- Date: 2022-04-08
- Subjects: Uncatalogued
- Language: English
- Type: Academic theses , Doctoral theses , text
- Identifier: http://hdl.handle.net/10962/164458 , vital:41120 , doi:10.21504/10962/164458
- Description: This research has focused on the synthesis and biological evaluation of a broad range of compounds characterised by the presence of the pharmacologically significant 4-hydroxycoumalin scaffold. The compounds were designed to contain additional pharmachophoric centres to enhance bioactivity and generate lead compounds with dualaction potential. The use of 4-hydroxycoumarin as the primary synthon enabled access to various series of 4-hydroxycoumarin conjugates, the reactive 3-position on the 4-hydroxycoumarin moiety being exploited for regioselective construction of the targeted compounds in several steps. Some of the reactants required in the construction of these compounds were specially synthesised and included propargyloxy benzaldehydes, benzyloxy benzaldehydes and 2,3-dihydroxysuccino-dihydride. Overall, eight different families of novel compounds were accessed, comprising conjugates of 4-hydroxycoumarin with bisethylidenesuccinohyrazide, trifluoroacetamide, amino, benzyloxyphenyl-iminoethyl, benzylidenehyrazinyl-thiazoyl, benzylidenehydrazonoethyl, propargyloxybenzylidenehydrazonoethyl and phenylacryloyl moieties using protocols that required minimal work-up and purification. The eighty novel compounds synthesised in the study were fully characterised using HMRS and advanced NMR techniques. Cytotoxicity, HIV-1 IN and PR inhibitory, and antitrypanosomal, antimalarial and anti-Mtb assays were conducted on the synthesised coumarin derivatives. Several compounds exhibited activity against HIV-1 IN, the most potent being a bis-ethylidenesuccinohyrazide with an IC50 value of 3.5 μM. Various compounds exhibited anti-malarial activity (% pLDH viability in the range 62-77%), anti-trypanosomal activity (the most potent with an IC50 = 0.9 μM against T.b. brucei) and a measure of anti-Mtb activity. Apart from two chalconyl derivatives, none of the synthesised compounds exhibited significant cytotoxicity. Conflicting results were obtained from the in silico docking studies; in some cases supporting the observed in vitro assay data while, in others, exhibiting no correlation. , Thesis (PhD) -- Faculty of Science, Chemistry, 2020
- Full Text:
- Date Issued: 2022-04-08
Applications of the Baylis-Hillman reaction in the synthesis of coumarin derivatives
- Authors: Musa, Musiliyu Ayodele
- Date: 2003
- Subjects: Coumarins Heterocyclic compounds -- Derivatives
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4403 , http://hdl.handle.net/10962/d1006705
- Description: The reaction of specially prepared salicylaldehyde benzyl ethers with the activated alkenes, methyl acrylate or acrylonitrile, in the presence of the catalyst, DABCO, has afforded Baylis-Hillman products, which have been subjected to conjugate addition with either piperidine or benzylamine. Hydrogenolysis of these conjugate addition products in the presence of a palladium-on-carbon catalyst has been shown to afford the corresponding 3-substituted coumarins, while treatment of O-benzylated Baylis-Hillman adducts with HCl or HI afforded the corresponding 3-(halomethyl)coumarins directly, in up to 94%. The 3-(halomethyl)coumarins have also been obtained in excellent yields (up to 98%) and even more conveniently, by treating the unprotected Baylis-Hillman products with HCl in a mixture of AcOH and Ac₂O, obtained from tert-butyl acrylate and various salicylaldehydes. The generality of an established route to the synthesis of coumarins via an intramolecular Baylis-Hillman reaction, involving the use of salicylaldehyde acrylate esters in the presence of DABCO, has also been demonstrated. Reactions between the 3-(halomethyl)coumarins and various nitrogen and carbon nucleophiles have been shown to proceed with a high degree of regioselectivity at the exocyclic allylic centre to afford 3-substituted coumarin products. The electronimpact mass spectra of selected coumarin derivatives have been investigated using high-resolution and B/E linked scan data. Fragmentation pathways have been proposed and fragmentation modes associated with different coumarin-containing analogues have been compared. A series of coumarin-containing analogues of ritonavir (a clinically useful HIV-1 protease inhibitor) have been prepared and characterized. The synthetic approach has involved the coupling of coumarin derivatives with a hydroxyethylene dipeptide isostere to afford ritonavir analogues containing coumarin termini. An interactive docking procedure has been used to explore the docking of ritonavir and a coumarincontaining analogue into the enzyme active site.
- Full Text:
- Date Issued: 2003
- Authors: Musa, Musiliyu Ayodele
- Date: 2003
- Subjects: Coumarins Heterocyclic compounds -- Derivatives
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4403 , http://hdl.handle.net/10962/d1006705
- Description: The reaction of specially prepared salicylaldehyde benzyl ethers with the activated alkenes, methyl acrylate or acrylonitrile, in the presence of the catalyst, DABCO, has afforded Baylis-Hillman products, which have been subjected to conjugate addition with either piperidine or benzylamine. Hydrogenolysis of these conjugate addition products in the presence of a palladium-on-carbon catalyst has been shown to afford the corresponding 3-substituted coumarins, while treatment of O-benzylated Baylis-Hillman adducts with HCl or HI afforded the corresponding 3-(halomethyl)coumarins directly, in up to 94%. The 3-(halomethyl)coumarins have also been obtained in excellent yields (up to 98%) and even more conveniently, by treating the unprotected Baylis-Hillman products with HCl in a mixture of AcOH and Ac₂O, obtained from tert-butyl acrylate and various salicylaldehydes. The generality of an established route to the synthesis of coumarins via an intramolecular Baylis-Hillman reaction, involving the use of salicylaldehyde acrylate esters in the presence of DABCO, has also been demonstrated. Reactions between the 3-(halomethyl)coumarins and various nitrogen and carbon nucleophiles have been shown to proceed with a high degree of regioselectivity at the exocyclic allylic centre to afford 3-substituted coumarin products. The electronimpact mass spectra of selected coumarin derivatives have been investigated using high-resolution and B/E linked scan data. Fragmentation pathways have been proposed and fragmentation modes associated with different coumarin-containing analogues have been compared. A series of coumarin-containing analogues of ritonavir (a clinically useful HIV-1 protease inhibitor) have been prepared and characterized. The synthetic approach has involved the coupling of coumarin derivatives with a hydroxyethylene dipeptide isostere to afford ritonavir analogues containing coumarin termini. An interactive docking procedure has been used to explore the docking of ritonavir and a coumarincontaining analogue into the enzyme active site.
- Full Text:
- Date Issued: 2003
Synthesis and conformational studies of indolizines
- Authors: George, Rosemary
- Date: 1994
- Subjects: Indole alkaloids -- Research , Organic compounds -- Synthesis , Chemistry, Organic
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4367 , http://hdl.handle.net/10962/d1005032 , Indole alkaloids -- Research , Organic compounds -- Synthesis , Chemistry, Organic
- Description: The present investigation has involved a kinetic and mechanistic study of the thermal cyclization of 3-acetoxy-3-(2-pyridyl)-2-methylenepropanoate esters and related compounds to 2-substituted indolizines. Substrates for the kinetic study were prepared via the Baylis-Hillmann reaction of pyridine-2-carboxaldehydes with acrylate esters, acrylonitrile and methyl vinyl ketone. The resulting hydroxy compounds were then acetylated to afford the acetoxy derivatives, thermal cyclization of which gave the corresponding 2-substituted indolizines. The cyclization reactions was followed using 'H NMR spectroscopy and were shown to follow firstorder kinetics. The influence of the various substituents on the observed first-order rate constants has been examined and variable temperature studies have permitted evaluation of activation parameters for the formation of methyl indolizine-2-carboxylate and ethyl indolizine-2-carboxylate. An alternative route to 2-substituted indolizines via halogenated derivatives was explored and several halogenated 2-pyridyl derivatives were synthesised and their thermal cyclization to indolizines was attempted. Novel 5-methylindolizine-2-carboxamides were prepared as part of this investigation and dynamic NMR spectroscopy was used to study internal rotation about the amide N-CO bond in these compounds.
- Full Text:
- Date Issued: 1994
- Authors: George, Rosemary
- Date: 1994
- Subjects: Indole alkaloids -- Research , Organic compounds -- Synthesis , Chemistry, Organic
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4367 , http://hdl.handle.net/10962/d1005032 , Indole alkaloids -- Research , Organic compounds -- Synthesis , Chemistry, Organic
- Description: The present investigation has involved a kinetic and mechanistic study of the thermal cyclization of 3-acetoxy-3-(2-pyridyl)-2-methylenepropanoate esters and related compounds to 2-substituted indolizines. Substrates for the kinetic study were prepared via the Baylis-Hillmann reaction of pyridine-2-carboxaldehydes with acrylate esters, acrylonitrile and methyl vinyl ketone. The resulting hydroxy compounds were then acetylated to afford the acetoxy derivatives, thermal cyclization of which gave the corresponding 2-substituted indolizines. The cyclization reactions was followed using 'H NMR spectroscopy and were shown to follow firstorder kinetics. The influence of the various substituents on the observed first-order rate constants has been examined and variable temperature studies have permitted evaluation of activation parameters for the formation of methyl indolizine-2-carboxylate and ethyl indolizine-2-carboxylate. An alternative route to 2-substituted indolizines via halogenated derivatives was explored and several halogenated 2-pyridyl derivatives were synthesised and their thermal cyclization to indolizines was attempted. Novel 5-methylindolizine-2-carboxamides were prepared as part of this investigation and dynamic NMR spectroscopy was used to study internal rotation about the amide N-CO bond in these compounds.
- Full Text:
- Date Issued: 1994
Sample preparation for pesticide analysis in water and sediments a case study of the Okavango Delta, Botswana
- Authors: Mmualefe, Lesego Cecilia
- Date: 2010
- Subjects: Water quality -- Botswana -- Okavango Delta Water -- Analysis Pesticides -- Environmental aspects -- Botswana -- Okavango Delta Water -- Pollution -- Botswana -- Okavango Delta DDT (Insecticide) -- Environmental aspects -- Botswana -- Okavango Delta
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4344 , http://hdl.handle.net/10962/d1005006
- Description: This thesis presents a first ever extensive analysis of pesticides in water and sediments from the Okavango Delta, Botswana, employing green sample preparation techniques that require small volumes of organic solvents hence generating negligible volumes of organic solvent waste. Pesticides were extracted and pre-concentrated from water by solid phase extraction (SPE) and headspace solid phase microextraction (HS-SPME) while supercritical fluid extraction (SFE) and pressurized fluid extraction (PFE) were employed for sediments. Subsequent analysis was carried out on a gas chromatograph with electron capture detection and analytes were unequivocally confirmed by high resolution mass spectrometric detection. Hexachlorobenzene (HCB), trans-chlordane, 4,4′-DDD and 4,4′-DDE were detected after optimized HS-SPME in several water samples from the lower Delta at concentrations ranging from 2.4 to 61.4 μg L-1 that are much higher than the 0.1 μg L-1 maximum limit of individual organochlorine pesticides in drinking water set by the European Community Directive. The same samples were cleaned with ISOLUTE C18 SPE sorbent with an optimal acetone/n-hexane (1:1 v/v) mixture for the elution of analytes. No pesticides were detected after SPE clean-up and pre-concentration. HCB, aldrin and 4, 4‟-DDT were identified in sediments after SFE at concentration ranges of 1.1 - 30.3, 0.5 – 15.2 and 1.4 – 55.4 μg/g, respectively. There was an increase of pesticides concentrations in the direction of water flow from the Panhandle (point of entry) to the lower delta. DDE, fatty acids and phthalates were detected after PFE with optimized extraction solvent and temperature. The presence of DDT metabolites in the water and sediments from the Okavango Delta confirm historical exposure to the pesticide. However their cumulative concentration increase in the water-flow direction calls for further investigation of point sources for the long-term preservation of the Delta. The green sample preparation techniques and low toxicity solvents employed in this thesis are thus recommended for routine environmental monitoring exercises.
- Full Text:
- Date Issued: 2010
- Authors: Mmualefe, Lesego Cecilia
- Date: 2010
- Subjects: Water quality -- Botswana -- Okavango Delta Water -- Analysis Pesticides -- Environmental aspects -- Botswana -- Okavango Delta Water -- Pollution -- Botswana -- Okavango Delta DDT (Insecticide) -- Environmental aspects -- Botswana -- Okavango Delta
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4344 , http://hdl.handle.net/10962/d1005006
- Description: This thesis presents a first ever extensive analysis of pesticides in water and sediments from the Okavango Delta, Botswana, employing green sample preparation techniques that require small volumes of organic solvents hence generating negligible volumes of organic solvent waste. Pesticides were extracted and pre-concentrated from water by solid phase extraction (SPE) and headspace solid phase microextraction (HS-SPME) while supercritical fluid extraction (SFE) and pressurized fluid extraction (PFE) were employed for sediments. Subsequent analysis was carried out on a gas chromatograph with electron capture detection and analytes were unequivocally confirmed by high resolution mass spectrometric detection. Hexachlorobenzene (HCB), trans-chlordane, 4,4′-DDD and 4,4′-DDE were detected after optimized HS-SPME in several water samples from the lower Delta at concentrations ranging from 2.4 to 61.4 μg L-1 that are much higher than the 0.1 μg L-1 maximum limit of individual organochlorine pesticides in drinking water set by the European Community Directive. The same samples were cleaned with ISOLUTE C18 SPE sorbent with an optimal acetone/n-hexane (1:1 v/v) mixture for the elution of analytes. No pesticides were detected after SPE clean-up and pre-concentration. HCB, aldrin and 4, 4‟-DDT were identified in sediments after SFE at concentration ranges of 1.1 - 30.3, 0.5 – 15.2 and 1.4 – 55.4 μg/g, respectively. There was an increase of pesticides concentrations in the direction of water flow from the Panhandle (point of entry) to the lower delta. DDE, fatty acids and phthalates were detected after PFE with optimized extraction solvent and temperature. The presence of DDT metabolites in the water and sediments from the Okavango Delta confirm historical exposure to the pesticide. However their cumulative concentration increase in the water-flow direction calls for further investigation of point sources for the long-term preservation of the Delta. The green sample preparation techniques and low toxicity solvents employed in this thesis are thus recommended for routine environmental monitoring exercises.
- Full Text:
- Date Issued: 2010
A bioinorganic study of some cobalt(II) Schiff base complexes of variously substituted hydroxybenzaldimines
- Authors: Shaibu, Rafiu Olarewaju
- Date: 2008
- Subjects: Cobalt Schiff bases Artemia Spectrum analysis Ligands -- Analysis Bioinorganic chemistry Antineoplastic agents Cancer -- Chemotherapy Ligands -- Toxicity
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4394 , http://hdl.handle.net/10962/d1006009
- Description: Syntheses of Schiff bases were carried out by reacting salicylaldyhde, ortho-vanillin, para-vanillin or vanillin with aniline, 1-aminonaphthalene, 4- and 3-aminopyridine, and also with 2- and 3-aminomethylpyridine. The various Schiff bases obtained from the condensation reaction were reacted with CoCl₂.6H₂0, triethylamine stripped CoCl₂.6H₂0 or Co(CH₃COO)₂ to form cobalt(Il) complexes of ratio 2:1. The complexes obtained from cobalt chloride designated as the "A series" are of the general formulae ML₂X₂.nH₂0 , (L = Schiff base, X = chlorine) while those obtained from cobalt acetate or triethylamine stripped cobalt chloride denoted as "B" and C" are of the general formulae ML₂. nH₂0. The few complexes that do not follow the general formulae highlighted above are: IA [M(HL)₃.Cl₂], (L = N-phenylsalicylaldimine), 4A = (MLCl₂), (L = N-phenylvanaldiminato), 7 A and 21 A (ML₂), (L = N-naphthyl-o-vanaldiminato, and N-methy-2-pyridylsalicylaldiminato respectively), 8A = MLCI, (L = N-naphthylvanaldiminato), 12A = M₂L₃Cl₂, (L = N-4-pyridylvanaldiminato), 15A (MLCI), (L = N-3-pyridyl-o-vanaldiminato). The ligands and their complexes were characterized using elemental analyses and cobalt analysis using ICP, FT-IR spectroscopy (mid and far-IR), NIR-UV/vis (diffuse reflectance), UV/vis in an aprotic and a protic solvents, while mass spectrometry, ¹HNMR and ¹³CNMR, was used to further characterized the ligands. The tautomeric nature of the Schiff bases were determined by examining the behaviour of Schiff bases and their complexes in a protic (e.g. MeOH) and non-protic (e.g. DMF) polar solvents. The effects of solvents on the electronic behaviour of the compounds were also examined. Using CDCl₃, the NMR technique was further used to confirm the structures of the Schiff bases. The tentative geometry of the complexes was determined using the spectra information obtained from the far infrared and the diffuse reflectance spectroscopy. With few exceptions, most of the "A" series are tetrahedral or distorted tetrahedral, while the "B + C" are octahedral or pseudooctahedral. A small number of complexes are assigned square-planar geometry owing to the characteristic spectral behaviour shown. In order to determine their biological activity, two biological assay methods (antimicrobial testing and brine shrimp lethality assay) were used. Using disc method, the bacteriostatic and fungicidal activities of the various Schiff bases and their respective complexes to Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa as well as Aspergillus niger, were measured and the average inhibition zones are tabulated and analysed. Both the Schiff bases and their complexes showed varying bacteriostatic and fungicidal activity against the bacteria and fungus tested. The inhibition activity is concentration dependent and potential antibiotic and fungicides are identified. To determine the toxicity of the ligands and their corresponding cobalt(II) complexes, brine shrimp lethality assay was used. The LD₅₀ of the tested compounds were calculated and the results obtained were tabulated for comparison.
- Full Text:
- Date Issued: 2008
- Authors: Shaibu, Rafiu Olarewaju
- Date: 2008
- Subjects: Cobalt Schiff bases Artemia Spectrum analysis Ligands -- Analysis Bioinorganic chemistry Antineoplastic agents Cancer -- Chemotherapy Ligands -- Toxicity
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4394 , http://hdl.handle.net/10962/d1006009
- Description: Syntheses of Schiff bases were carried out by reacting salicylaldyhde, ortho-vanillin, para-vanillin or vanillin with aniline, 1-aminonaphthalene, 4- and 3-aminopyridine, and also with 2- and 3-aminomethylpyridine. The various Schiff bases obtained from the condensation reaction were reacted with CoCl₂.6H₂0, triethylamine stripped CoCl₂.6H₂0 or Co(CH₃COO)₂ to form cobalt(Il) complexes of ratio 2:1. The complexes obtained from cobalt chloride designated as the "A series" are of the general formulae ML₂X₂.nH₂0 , (L = Schiff base, X = chlorine) while those obtained from cobalt acetate or triethylamine stripped cobalt chloride denoted as "B" and C" are of the general formulae ML₂. nH₂0. The few complexes that do not follow the general formulae highlighted above are: IA [M(HL)₃.Cl₂], (L = N-phenylsalicylaldimine), 4A = (MLCl₂), (L = N-phenylvanaldiminato), 7 A and 21 A (ML₂), (L = N-naphthyl-o-vanaldiminato, and N-methy-2-pyridylsalicylaldiminato respectively), 8A = MLCI, (L = N-naphthylvanaldiminato), 12A = M₂L₃Cl₂, (L = N-4-pyridylvanaldiminato), 15A (MLCI), (L = N-3-pyridyl-o-vanaldiminato). The ligands and their complexes were characterized using elemental analyses and cobalt analysis using ICP, FT-IR spectroscopy (mid and far-IR), NIR-UV/vis (diffuse reflectance), UV/vis in an aprotic and a protic solvents, while mass spectrometry, ¹HNMR and ¹³CNMR, was used to further characterized the ligands. The tautomeric nature of the Schiff bases were determined by examining the behaviour of Schiff bases and their complexes in a protic (e.g. MeOH) and non-protic (e.g. DMF) polar solvents. The effects of solvents on the electronic behaviour of the compounds were also examined. Using CDCl₃, the NMR technique was further used to confirm the structures of the Schiff bases. The tentative geometry of the complexes was determined using the spectra information obtained from the far infrared and the diffuse reflectance spectroscopy. With few exceptions, most of the "A" series are tetrahedral or distorted tetrahedral, while the "B + C" are octahedral or pseudooctahedral. A small number of complexes are assigned square-planar geometry owing to the characteristic spectral behaviour shown. In order to determine their biological activity, two biological assay methods (antimicrobial testing and brine shrimp lethality assay) were used. Using disc method, the bacteriostatic and fungicidal activities of the various Schiff bases and their respective complexes to Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa as well as Aspergillus niger, were measured and the average inhibition zones are tabulated and analysed. Both the Schiff bases and their complexes showed varying bacteriostatic and fungicidal activity against the bacteria and fungus tested. The inhibition activity is concentration dependent and potential antibiotic and fungicides are identified. To determine the toxicity of the ligands and their corresponding cobalt(II) complexes, brine shrimp lethality assay was used. The LD₅₀ of the tested compounds were calculated and the results obtained were tabulated for comparison.
- Full Text:
- Date Issued: 2008
Continuous-flow dynamic dialysis and its application to collagen-ligand interactions
- Authors: Sparrow, Neil Arthur
- Date: 1983
- Subjects: Collagen Ligands (Biochemistry) Ligand binding (Biochemistry) Protein-protein interactions Tannins
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4297 , http://hdl.handle.net/10962/d1004617
- Description: Studies undertaken to investigate the binding of low molecular mass analogues of polyphenolic vegetable tannins to collagen have prompted the development of a new method to investigate protein-ligand interactions. This method, the continuous-flow dynamic dialysis method (CFDD), differs from conventional dialysis procedures used for protein-ligand binding studies. In this method, the ligand concentration in the diffusate is monitored automatically at successive closely spaced time intervals while being continuously eluted from the dialysis cell. The primary data obtained by this method consists of a series of spectrophotometric absorbance measurements representing the ligand concentration in the sink compartment of a dialysis cell. This primary data is recorded by means of a data logging device onto a punched paper tape for subsequent computer processing. Two original methods are presented for analysing the primary data to extract the protein-ligand binding isotherm. The first of these is a direct analysis which relies on Fick's first law of diffusion. In this method it is necessary to establish, by means of a control experiment, a value for the ligand permeation constant. This is used in a subsequent analysis to establish a relationship between the measured rate of diffusion of the ligand from a protein-ligand mixture and the concentration of unbound ligand which is in equilibrium with the protein-ligand complex. The protein-ligand binding isotherm is obtained from parametric equations which give the quantity of ligand bound to the protein and the concentration of unbound ligand in the sample compartment as functions of time. The second method, which is more general, utilizes the same primary data but is based on establishing a system transfer function to characterise the dialysis and eluting processes. This analysis depends on the linearity of the system and utilizes numerical laplace transforms of the primary data sets obtained from control and protein-ligand dialyses. Laplace transforms are used to effect a deconvolution of the transfer function from the primary data and yield the concentration of ligand in equilibrium with the protein-ligand complex. This procedure yields, simultaneously, both the total ligand concentration and the concentration of unbound ligand in the protein compartment of the dialysis cell. These quantities are used to establish the binding isotherm for the protein ligand system. Numerical inversion of the laplace transforms in this analysis is effected by their reduction to Fourier series. The experimental reliability of the continuous-flow dynamic dialysis method, and validity of the two analytical methods used to derive a binding isotherm from dialysis data are evaluated from studies of the binding of phenol red to bovine serum albumin (BSA) at 15⁰, 20⁰ and 25⁰ C, as well as from simulated binding curves generated by the numerical solution of the differential equations used to describe the dialysis and elution process in terms of a two-site Scatchard binding model. The method is used to investigate the binding to collagen of a series of low molecular mass phenolic compounds which can be isolated from Wattle and Quebracho vegetable tannin extracts. These compounds can be considered as monomeric precursor analogues of the polymeric vegetable tannins. The binding of these ligands to collagen is shown to be characterised by high capacity, low affinity binding in which the uptake of ligand by the protein increases linearly with increasing ligand concentration. Collagen exhibits no indication of site saturation for these ligands over the experimentally accessible concentration ranges investigated.
- Full Text:
- Date Issued: 1983
- Authors: Sparrow, Neil Arthur
- Date: 1983
- Subjects: Collagen Ligands (Biochemistry) Ligand binding (Biochemistry) Protein-protein interactions Tannins
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4297 , http://hdl.handle.net/10962/d1004617
- Description: Studies undertaken to investigate the binding of low molecular mass analogues of polyphenolic vegetable tannins to collagen have prompted the development of a new method to investigate protein-ligand interactions. This method, the continuous-flow dynamic dialysis method (CFDD), differs from conventional dialysis procedures used for protein-ligand binding studies. In this method, the ligand concentration in the diffusate is monitored automatically at successive closely spaced time intervals while being continuously eluted from the dialysis cell. The primary data obtained by this method consists of a series of spectrophotometric absorbance measurements representing the ligand concentration in the sink compartment of a dialysis cell. This primary data is recorded by means of a data logging device onto a punched paper tape for subsequent computer processing. Two original methods are presented for analysing the primary data to extract the protein-ligand binding isotherm. The first of these is a direct analysis which relies on Fick's first law of diffusion. In this method it is necessary to establish, by means of a control experiment, a value for the ligand permeation constant. This is used in a subsequent analysis to establish a relationship between the measured rate of diffusion of the ligand from a protein-ligand mixture and the concentration of unbound ligand which is in equilibrium with the protein-ligand complex. The protein-ligand binding isotherm is obtained from parametric equations which give the quantity of ligand bound to the protein and the concentration of unbound ligand in the sample compartment as functions of time. The second method, which is more general, utilizes the same primary data but is based on establishing a system transfer function to characterise the dialysis and eluting processes. This analysis depends on the linearity of the system and utilizes numerical laplace transforms of the primary data sets obtained from control and protein-ligand dialyses. Laplace transforms are used to effect a deconvolution of the transfer function from the primary data and yield the concentration of ligand in equilibrium with the protein-ligand complex. This procedure yields, simultaneously, both the total ligand concentration and the concentration of unbound ligand in the protein compartment of the dialysis cell. These quantities are used to establish the binding isotherm for the protein ligand system. Numerical inversion of the laplace transforms in this analysis is effected by their reduction to Fourier series. The experimental reliability of the continuous-flow dynamic dialysis method, and validity of the two analytical methods used to derive a binding isotherm from dialysis data are evaluated from studies of the binding of phenol red to bovine serum albumin (BSA) at 15⁰, 20⁰ and 25⁰ C, as well as from simulated binding curves generated by the numerical solution of the differential equations used to describe the dialysis and elution process in terms of a two-site Scatchard binding model. The method is used to investigate the binding to collagen of a series of low molecular mass phenolic compounds which can be isolated from Wattle and Quebracho vegetable tannin extracts. These compounds can be considered as monomeric precursor analogues of the polymeric vegetable tannins. The binding of these ligands to collagen is shown to be characterised by high capacity, low affinity binding in which the uptake of ligand by the protein increases linearly with increasing ligand concentration. Collagen exhibits no indication of site saturation for these ligands over the experimentally accessible concentration ranges investigated.
- Full Text:
- Date Issued: 1983
Design, synthesis and evaluation of silver-specific ligands
- Authors: Daubinet, André
- Date: 2001
- Subjects: Ligands Ligands -- Design Ligands -- Analysis Ligands -- Evaluation Silver -- Metallurgy
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4308 , http://hdl.handle.net/10962/d1004966
- Description: Several series of ligands, designed to chelate silver(I) specifically in the presence of base metals, have been synthesised. The ligands include: - dithiodiamide compounds, prepared by the condensation of acetanilide derivatives with 1,2-dibromoethane; propanenitrile and propanoic ester derivatives prepared from pyridine-2-carbaldehyde via the Morita-Baylis-Hillman reaction; and novel malonamide ligands from the reaction of diethyl malonate with a range of primary amines. The malonamide derivatives were prepared under both conventional thermal and microwave-assisted conditions, the latter proving to be highly efficient. The ligands were all characterised using a combination of spectroscopic and, where appropriate, elemental analysis; in one case, the structural assignment was confirmed by single-crystal X-ray analysis. The fragmentation patterns in the electron-impact mass spectra of the malonamide derivatives have been explored using high-resolution and meta-stable peak scanning techniques. Complexes of the malonamide ligands with copper(II) and silver(I) have been synthesised, and examination of these complexes has revealed distinct differences in their co-ordination preferences towards silver(I) and copper(II). Tentative, computer-modelled structures for the complexes have been proposed using the available spectroscopic and elemental analysis data. Computer modelling, at the Molecular Mechanics level, has also been used to assess the capacity of the ligand systems to adopt conformations suitable for the chelation of tetrahedral silver(I). Solvent extraction studies have been undertaken using aqueous metal ion solutions and various organic solvents. The dithiodiamide derivatives typically presented solubility problems, but one of the ligands, N,N´-bis(3-chlorophenyl)-3,6-dithiaoctanediamide, exhibited significant but slow extraction of silver(I) into toluene. The malonamide derivatives, however, proved to be readily soluble in ethyl acetate and, in some cases, exhibited good to excellent selectivity for silver(I) in the presence of the base metals copper and lead. Atomic absorption analysis revealed rapid equilibration times (<15 min) and high extraction efficiencies over a wide pH range (2.78 - 9.0). Metal selectivity has been determined by ICP-MS analysis of the residual silver, copper and lead present in the aqueous phase after 15 min, and one of the ligands, N,N´-bis(2-benzylsulfanylethyl)malonamide, exhibits excellent (≥ 96 %) silver(I) specificity.
- Full Text:
- Date Issued: 2001
- Authors: Daubinet, André
- Date: 2001
- Subjects: Ligands Ligands -- Design Ligands -- Analysis Ligands -- Evaluation Silver -- Metallurgy
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4308 , http://hdl.handle.net/10962/d1004966
- Description: Several series of ligands, designed to chelate silver(I) specifically in the presence of base metals, have been synthesised. The ligands include: - dithiodiamide compounds, prepared by the condensation of acetanilide derivatives with 1,2-dibromoethane; propanenitrile and propanoic ester derivatives prepared from pyridine-2-carbaldehyde via the Morita-Baylis-Hillman reaction; and novel malonamide ligands from the reaction of diethyl malonate with a range of primary amines. The malonamide derivatives were prepared under both conventional thermal and microwave-assisted conditions, the latter proving to be highly efficient. The ligands were all characterised using a combination of spectroscopic and, where appropriate, elemental analysis; in one case, the structural assignment was confirmed by single-crystal X-ray analysis. The fragmentation patterns in the electron-impact mass spectra of the malonamide derivatives have been explored using high-resolution and meta-stable peak scanning techniques. Complexes of the malonamide ligands with copper(II) and silver(I) have been synthesised, and examination of these complexes has revealed distinct differences in their co-ordination preferences towards silver(I) and copper(II). Tentative, computer-modelled structures for the complexes have been proposed using the available spectroscopic and elemental analysis data. Computer modelling, at the Molecular Mechanics level, has also been used to assess the capacity of the ligand systems to adopt conformations suitable for the chelation of tetrahedral silver(I). Solvent extraction studies have been undertaken using aqueous metal ion solutions and various organic solvents. The dithiodiamide derivatives typically presented solubility problems, but one of the ligands, N,N´-bis(3-chlorophenyl)-3,6-dithiaoctanediamide, exhibited significant but slow extraction of silver(I) into toluene. The malonamide derivatives, however, proved to be readily soluble in ethyl acetate and, in some cases, exhibited good to excellent selectivity for silver(I) in the presence of the base metals copper and lead. Atomic absorption analysis revealed rapid equilibration times (<15 min) and high extraction efficiencies over a wide pH range (2.78 - 9.0). Metal selectivity has been determined by ICP-MS analysis of the residual silver, copper and lead present in the aqueous phase after 15 min, and one of the ligands, N,N´-bis(2-benzylsulfanylethyl)malonamide, exhibits excellent (≥ 96 %) silver(I) specificity.
- Full Text:
- Date Issued: 2001
Structural and synthetic investigations of diterpenoid natural products from southern African marine invertebrates
- Authors: Gray, Christopher Anthony
- Date: 2003
- Subjects: Ethyl acetoacetate Diterpenes Limpets -- South Africa Natural products -- South Africa
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4349 , http://hdl.handle.net/10962/d1005014
- Description: This thesis is divided into two parts. The first part (Chapter Two) documents a bioassay guided investigation of the ethyl acetate extracts of four marine invertebrates from Mozambique (an Irciniid sponge, a Haliclona sp. sponge, an ascidian tentatively identified as Diplosoma sp., and the soft coral Cladiella kashmani). Eight known compounds [ilimaquinone (2.1), renierone (2.7), N-formyl-1,2-dihydrorenierone (2.8), 1,6-dimethyl-7-methoxy-5,8-dihydroisoquinoline-5,8-dione (2.9), mimosamycin (2.10) 7Z-allylidene-5-hydroxy-7,7a-dihydro-2H-cyclopenta[b]pyran-6-one (2.11), flaccidoxide (2.18) and 11S,12S-epoxycembra-1Z,3E,7E-trien-14S-ol (2.19)] and a new diterpene [13S,14R-diacetoxy-11S,12R-epoxycembra-1Z,3E,7E-triene (2.20)] were isolated and identified using standard spectroscopic techniques. Anomalies in the published spectral data of 2.1 and 2.8 were exposed and corrected, and the absolute stereochemistry of the cembrane diterpenes 2.18 and 2.20 established using the modified Mosher’s method. The comparative activities of the nine natural products against four cancer cell lines (A549, LOX, OVCAR3, SNB19) are reported. The second part of the thesis (Chapter Three – Chapter Six) is concerned with an ecological, structural and synthetic study of diterpenes from the endemic South African pulmonate limpet Trimusculus costatus. Two new labdane diterpenes [6b,7a-diacetoxylabda-8,13E-dien-15-ol (3.10) and 2a,6b,7a-triacetoxylabda-8,13E-dien-15-ol (3.11)] were isolated from T. costatus and evaluated for anti-feeding activity against the common predatory fish Pomadasys commersonnii. A strategy for the semi-synthesis of 3.10 from rhinocerotinoic acid (4.14), a diterpene reportedly present in the ubiquitous South African shrub Elytropappus rhinocerotis, was devised in order to allow further bioactivity tests to be performed and unequivocally assign the unknown absolute stereochemistry of the T. costatus metabolites. Attempts to isolate rhinocerotinoic acid from local specimens of Elytropappus rhinocerotis were unsuccessful, and as the repetition of a published synthesis of 4.14 from (-)-sclareol (4.15) gave rhinocerotinoic acid in unacceptably low yields with poor stereoselectivity, an improved synthesis of 4.14 is presented. Comprehensive studies using hispanone (5.1) as a model compound showed that 6,7-dioxygenated labda-8-enes could be prepared from compounds possessing a 7-oxo-labda-8-ene skeleton with some degree of stereocontrol. In the process, fourteen new hispanone analogues were prepared and most of these were tested for activity in a suite of ten agro-chemical assays. The novel compound 7b-hydroxy-9a-carbonitrile-15,16-epoxylabda-13(16),14-dien-6-one (5.34) exhibited significant activity against the crop fungus Phytophthora infestans and is currently being subjected to further agro-chemical tests. Unfortunately, the results from the oxygenation study performed on the model compound 5.1 could not be directly extrapolated to rhinocerotinoic acid. Attempts to prepare the naturally occurring 3.10 from 4.14 via an alternative route were unsuccessful but yielded an analogue of 3.10 in which the substituents at C-6 and C-7 are in a diequatorial rather than a diaxial configuration.
- Full Text:
- Date Issued: 2003
- Authors: Gray, Christopher Anthony
- Date: 2003
- Subjects: Ethyl acetoacetate Diterpenes Limpets -- South Africa Natural products -- South Africa
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4349 , http://hdl.handle.net/10962/d1005014
- Description: This thesis is divided into two parts. The first part (Chapter Two) documents a bioassay guided investigation of the ethyl acetate extracts of four marine invertebrates from Mozambique (an Irciniid sponge, a Haliclona sp. sponge, an ascidian tentatively identified as Diplosoma sp., and the soft coral Cladiella kashmani). Eight known compounds [ilimaquinone (2.1), renierone (2.7), N-formyl-1,2-dihydrorenierone (2.8), 1,6-dimethyl-7-methoxy-5,8-dihydroisoquinoline-5,8-dione (2.9), mimosamycin (2.10) 7Z-allylidene-5-hydroxy-7,7a-dihydro-2H-cyclopenta[b]pyran-6-one (2.11), flaccidoxide (2.18) and 11S,12S-epoxycembra-1Z,3E,7E-trien-14S-ol (2.19)] and a new diterpene [13S,14R-diacetoxy-11S,12R-epoxycembra-1Z,3E,7E-triene (2.20)] were isolated and identified using standard spectroscopic techniques. Anomalies in the published spectral data of 2.1 and 2.8 were exposed and corrected, and the absolute stereochemistry of the cembrane diterpenes 2.18 and 2.20 established using the modified Mosher’s method. The comparative activities of the nine natural products against four cancer cell lines (A549, LOX, OVCAR3, SNB19) are reported. The second part of the thesis (Chapter Three – Chapter Six) is concerned with an ecological, structural and synthetic study of diterpenes from the endemic South African pulmonate limpet Trimusculus costatus. Two new labdane diterpenes [6b,7a-diacetoxylabda-8,13E-dien-15-ol (3.10) and 2a,6b,7a-triacetoxylabda-8,13E-dien-15-ol (3.11)] were isolated from T. costatus and evaluated for anti-feeding activity against the common predatory fish Pomadasys commersonnii. A strategy for the semi-synthesis of 3.10 from rhinocerotinoic acid (4.14), a diterpene reportedly present in the ubiquitous South African shrub Elytropappus rhinocerotis, was devised in order to allow further bioactivity tests to be performed and unequivocally assign the unknown absolute stereochemistry of the T. costatus metabolites. Attempts to isolate rhinocerotinoic acid from local specimens of Elytropappus rhinocerotis were unsuccessful, and as the repetition of a published synthesis of 4.14 from (-)-sclareol (4.15) gave rhinocerotinoic acid in unacceptably low yields with poor stereoselectivity, an improved synthesis of 4.14 is presented. Comprehensive studies using hispanone (5.1) as a model compound showed that 6,7-dioxygenated labda-8-enes could be prepared from compounds possessing a 7-oxo-labda-8-ene skeleton with some degree of stereocontrol. In the process, fourteen new hispanone analogues were prepared and most of these were tested for activity in a suite of ten agro-chemical assays. The novel compound 7b-hydroxy-9a-carbonitrile-15,16-epoxylabda-13(16),14-dien-6-one (5.34) exhibited significant activity against the crop fungus Phytophthora infestans and is currently being subjected to further agro-chemical tests. Unfortunately, the results from the oxygenation study performed on the model compound 5.1 could not be directly extrapolated to rhinocerotinoic acid. Attempts to prepare the naturally occurring 3.10 from 4.14 via an alternative route were unsuccessful but yielded an analogue of 3.10 in which the substituents at C-6 and C-7 are in a diequatorial rather than a diaxial configuration.
- Full Text:
- Date Issued: 2003
Study of titanium, tantalum and chromium catalysts for use in industrial transformations
- Authors: Tau, Prudence Lerato
- Date: 2007
- Subjects: Titanium Tantalum Phthalocyanines Electrochemistry Photochemotherapy Chromium Spectrum analysis
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4363 , http://hdl.handle.net/10962/d1005028
- Description: PART A The syntheses, spectroscopic and electrochemical characterisation of a series of titanium and tantalum phthalocyanine complexes are reported. The complexes are unsubstituted and substituted at either the peripheral or non-peripheral positions with sulphonates, aryloxy, arylthio or amino groups. The complexes mostly exhibit Qbands in the near-infrared region as well as interesting properties in different solvents. The interaction of differently sulphonated titanium and tantalum phthalocyanine complexes with methyl viologen (MV[superscript 2+]), and hence the stoichiometry and association constants are evaluated. Detailed photophysicochemical properties of the complexes were investigated and are for the first time presented with fluorescence lifetimes easily obtained from fluorescence quenching studies. The transformation of 1-hexene photocatalysed by aryloxy- and arylthio-appended complexes is also presented for the first time. The electrochemical properties of the complexes are unknown and are thus presented. Cyclic (CV) and square wave (SWV) voltammetries, chronocoulometry and spectroelectrochemistry are employed in the study of the complexes. Two oneelectron reductions and a simultaneous 4-electron reduction are observed for the unsubstituted Cl[subscript 3]TaPc. Reduction occurs first at the metal followed by ring-based processes. The tetra- and octa-substituted derivatives however exhibit peculiar electrochemical behaviour where a multi-electron transfer process occurs for complexes bearing certain substituents. For all complexes, the first two reductions are metal-based followed by ring-based processes. A comparative study of the electrocatalytic activities of the complexes towards the oxidation of nitrite is also investigated. The complexes are immobilised onto a glassy carbon electrode either by drop-dry or electropolymerisation methods. All the modified electrodes exhibit improved electrocatalytic oxidation of nitrite than the unmodified electrodes by a twoelectron mechanism producing nitrate ions. Catalytic currents are enhanced and nitrite overpotential reduced to ~ 0.60 V. Kinetic parameters are determined for all complexes and a mechanism is proposed. PART B: The syntheses and electrochemical characterisation of chromium and titanium complexes for the selective trimerisation of ethylene to 1-hexene are presented. The synthesis of the chromium complex requires simple steps while tedious steps are used for the air-sensitive titanium complex. The spectroscopic interaction of the chromium complex with the co-catalyst methylaluminoxane is investigated. The complexes are characterised by electrochemical methods such as cyclic voltammetry and spectroelectrochemistry.
- Full Text:
- Date Issued: 2007
- Authors: Tau, Prudence Lerato
- Date: 2007
- Subjects: Titanium Tantalum Phthalocyanines Electrochemistry Photochemotherapy Chromium Spectrum analysis
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4363 , http://hdl.handle.net/10962/d1005028
- Description: PART A The syntheses, spectroscopic and electrochemical characterisation of a series of titanium and tantalum phthalocyanine complexes are reported. The complexes are unsubstituted and substituted at either the peripheral or non-peripheral positions with sulphonates, aryloxy, arylthio or amino groups. The complexes mostly exhibit Qbands in the near-infrared region as well as interesting properties in different solvents. The interaction of differently sulphonated titanium and tantalum phthalocyanine complexes with methyl viologen (MV[superscript 2+]), and hence the stoichiometry and association constants are evaluated. Detailed photophysicochemical properties of the complexes were investigated and are for the first time presented with fluorescence lifetimes easily obtained from fluorescence quenching studies. The transformation of 1-hexene photocatalysed by aryloxy- and arylthio-appended complexes is also presented for the first time. The electrochemical properties of the complexes are unknown and are thus presented. Cyclic (CV) and square wave (SWV) voltammetries, chronocoulometry and spectroelectrochemistry are employed in the study of the complexes. Two oneelectron reductions and a simultaneous 4-electron reduction are observed for the unsubstituted Cl[subscript 3]TaPc. Reduction occurs first at the metal followed by ring-based processes. The tetra- and octa-substituted derivatives however exhibit peculiar electrochemical behaviour where a multi-electron transfer process occurs for complexes bearing certain substituents. For all complexes, the first two reductions are metal-based followed by ring-based processes. A comparative study of the electrocatalytic activities of the complexes towards the oxidation of nitrite is also investigated. The complexes are immobilised onto a glassy carbon electrode either by drop-dry or electropolymerisation methods. All the modified electrodes exhibit improved electrocatalytic oxidation of nitrite than the unmodified electrodes by a twoelectron mechanism producing nitrate ions. Catalytic currents are enhanced and nitrite overpotential reduced to ~ 0.60 V. Kinetic parameters are determined for all complexes and a mechanism is proposed. PART B: The syntheses and electrochemical characterisation of chromium and titanium complexes for the selective trimerisation of ethylene to 1-hexene are presented. The synthesis of the chromium complex requires simple steps while tedious steps are used for the air-sensitive titanium complex. The spectroscopic interaction of the chromium complex with the co-catalyst methylaluminoxane is investigated. The complexes are characterised by electrochemical methods such as cyclic voltammetry and spectroelectrochemistry.
- Full Text:
- Date Issued: 2007
Computer modelling of the thermal decomposition of solids
- Authors: De la Croix, Annemarie
- Date: 1996
- Subjects: Solids -- Thermal properties -- Computer simulation
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4302 , http://hdl.handle.net/10962/d1004960 , Solids -- Thermal properties -- Computer simulation
- Description: Decompositions of solids are typically of the form: A(s) ----> B(s) + gases. Symmetry-controlled routes (based on known and hypothetical crystal structures) for transforming the solid reactant into the solid product were devised as possible decomposition pathways. Lattice energies of the reactants, of the postulated transient intermediate structures and of the final solid products were then estimated by crystal modelling procedures. Profiles of lattice energy changes during the proposed decomposition routes were constructed and any energy barriers were compared with experimental activation energies reported for the thermal decompositions. The crystal modelling was performed with the computer program WMIN. Calculation of the lattice energies involved the development of a model potential for the perfect lattice and the evaluation of the interatomic parameters. The potential was based on the Born model of ionic solids using the Buckingham potential (Ø(r)= Ae⁻r/p - C/r⁶) to describe the short-range energy contribution. Empirical fitting was used to establish reliable interatomic energy parameters. The reliability of the interatomic potentials was assessed by calculating crystal structures and lattice energies (which were not included in the fitting). The particular reactions selected for modelling were the decompositions of the alkaline-earth metal (Ca, Sr, Ba) peroxides and carbonates: M0₂(s) ---> MO(s) + ¹/₂0₂(g) MC0₃(s) ---> MO(s) + CO₂(g)The lattice energies calculated for the known structures were in good agreement with reported values, (except for Ba0₂ and BaC0₃) which provided support for the adequacy of the potential model used. Activation energies calculated for the decomposition of the carbonates were in the correct order but hlgher than experimental values, i. e., 422, 422, 465 and 499 kJ mol̄̄⁻¹ compared to the experimental values of 205, 87(?), 222 and 283 kJ mol̄̄⁻¹ for CaC0₃ (calcite), CaC0₃(aragonite), SrC0₃ and BaC0₃. The values calculated for the peroxides (91 and 100 kJ mol⁻¹ compared to the experimental values of 119 and 185 kJ mol⁻¹ for Sr0₂ and Ba0₂ respectively) were less satisfactory but could be a reflection of the poor structural data used for the peroxides. The significance of this approach to the modelling of solid decompositions is discussed.
- Full Text:
- Date Issued: 1996
- Authors: De la Croix, Annemarie
- Date: 1996
- Subjects: Solids -- Thermal properties -- Computer simulation
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4302 , http://hdl.handle.net/10962/d1004960 , Solids -- Thermal properties -- Computer simulation
- Description: Decompositions of solids are typically of the form: A(s) ----> B(s) + gases. Symmetry-controlled routes (based on known and hypothetical crystal structures) for transforming the solid reactant into the solid product were devised as possible decomposition pathways. Lattice energies of the reactants, of the postulated transient intermediate structures and of the final solid products were then estimated by crystal modelling procedures. Profiles of lattice energy changes during the proposed decomposition routes were constructed and any energy barriers were compared with experimental activation energies reported for the thermal decompositions. The crystal modelling was performed with the computer program WMIN. Calculation of the lattice energies involved the development of a model potential for the perfect lattice and the evaluation of the interatomic parameters. The potential was based on the Born model of ionic solids using the Buckingham potential (Ø(r)= Ae⁻r/p - C/r⁶) to describe the short-range energy contribution. Empirical fitting was used to establish reliable interatomic energy parameters. The reliability of the interatomic potentials was assessed by calculating crystal structures and lattice energies (which were not included in the fitting). The particular reactions selected for modelling were the decompositions of the alkaline-earth metal (Ca, Sr, Ba) peroxides and carbonates: M0₂(s) ---> MO(s) + ¹/₂0₂(g) MC0₃(s) ---> MO(s) + CO₂(g)The lattice energies calculated for the known structures were in good agreement with reported values, (except for Ba0₂ and BaC0₃) which provided support for the adequacy of the potential model used. Activation energies calculated for the decomposition of the carbonates were in the correct order but hlgher than experimental values, i. e., 422, 422, 465 and 499 kJ mol̄̄⁻¹ compared to the experimental values of 205, 87(?), 222 and 283 kJ mol̄̄⁻¹ for CaC0₃ (calcite), CaC0₃(aragonite), SrC0₃ and BaC0₃. The values calculated for the peroxides (91 and 100 kJ mol⁻¹ compared to the experimental values of 119 and 185 kJ mol⁻¹ for Sr0₂ and Ba0₂ respectively) were less satisfactory but could be a reflection of the poor structural data used for the peroxides. The significance of this approach to the modelling of solid decompositions is discussed.
- Full Text:
- Date Issued: 1996
Development of molecularly imprinted polymer based solid phase extraction sorbents for the selective cleanup of food and pharmaceutical residue samples
- Authors: Batlokwa, Bareki Shima
- Date: 2012
- Subjects: Sorbents -- Research Nanofibers -- Research Aflatoxins -- Research Electrospinning -- Research Extraction (Chemistry) -- Research
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4309 , http://hdl.handle.net/10962/d1004967
- Description: This thesis presents the development of chlorophyll, cholic acid, aflatoxin B1 molecularly imprinted polymer (MIP) particles and cholic acid MIP nanofibers for application as selective solid phase extraction (SPE) sorbents. The particles were prepared by bulk polymerization and the nanofibers by a novel approach combining molecular imprinting and electrospinning technology. The AFB1 MIP particles were compared with an aflatoxin specific immunoextraction sorbent in cleaning-up and pre-concentrating aflatoxins from nut extracts. They both recorded high extraction efficiencies (EEs) of > 97 % in selectively extracting the aflatoxins (AFB1, AFB2, AFG1 and AFG2). High reproducibility marked by the low %RSDs of < 1% and low LODs of ≤ 0.02 ng/g were calculated in all cases. The LODs were within the monitoring requirements of the European Commission. The results were validated with a peanut butter certified reference material. The chlorophyll MIP on the other hand selectively removed chlorophyll that would otherwise interfere during pesticide residue analysis (PRA) from > 0.6 to <0.09 Au in green plants extracts. The extracted chlorophyll was removed to far below the level of ≥ 0.399 Au that is usually associated with interference during PRA. Furthermore, the MIP demonstrated better selectivity by removing only chlorophyll (> 99%) in the presence of planar pesticides than the currently employed graphitized carbon black (GCB) that removed both the chlorophyll (> 88%) and planar pesticides (> 89%). For the interfering cholic acid during drug residue analysis, cholic acid MIP electrospun nanofibers demonstrated to be more sensitive and possessing higher loading capacity than the MIP particles. 100% cholic acid was removed by the nanofibers from standard solutions relative to 80% by the particles. This showed that the nanofibers have better performance than the micro particles and as such have potential to replace the particle based SPE sorbents that are currently in use. All the templates were optimally removed from the prepared MIPs by employing a novel pressurized hot water extraction template removal method that was used for the first time in this thesis. The method employed only water, an environmentally friendly solvent to remove templates to ≥ 99.6% with template residual bleeding of ≤ 0.02%.
- Full Text:
- Date Issued: 2012
- Authors: Batlokwa, Bareki Shima
- Date: 2012
- Subjects: Sorbents -- Research Nanofibers -- Research Aflatoxins -- Research Electrospinning -- Research Extraction (Chemistry) -- Research
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4309 , http://hdl.handle.net/10962/d1004967
- Description: This thesis presents the development of chlorophyll, cholic acid, aflatoxin B1 molecularly imprinted polymer (MIP) particles and cholic acid MIP nanofibers for application as selective solid phase extraction (SPE) sorbents. The particles were prepared by bulk polymerization and the nanofibers by a novel approach combining molecular imprinting and electrospinning technology. The AFB1 MIP particles were compared with an aflatoxin specific immunoextraction sorbent in cleaning-up and pre-concentrating aflatoxins from nut extracts. They both recorded high extraction efficiencies (EEs) of > 97 % in selectively extracting the aflatoxins (AFB1, AFB2, AFG1 and AFG2). High reproducibility marked by the low %RSDs of < 1% and low LODs of ≤ 0.02 ng/g were calculated in all cases. The LODs were within the monitoring requirements of the European Commission. The results were validated with a peanut butter certified reference material. The chlorophyll MIP on the other hand selectively removed chlorophyll that would otherwise interfere during pesticide residue analysis (PRA) from > 0.6 to <0.09 Au in green plants extracts. The extracted chlorophyll was removed to far below the level of ≥ 0.399 Au that is usually associated with interference during PRA. Furthermore, the MIP demonstrated better selectivity by removing only chlorophyll (> 99%) in the presence of planar pesticides than the currently employed graphitized carbon black (GCB) that removed both the chlorophyll (> 88%) and planar pesticides (> 89%). For the interfering cholic acid during drug residue analysis, cholic acid MIP electrospun nanofibers demonstrated to be more sensitive and possessing higher loading capacity than the MIP particles. 100% cholic acid was removed by the nanofibers from standard solutions relative to 80% by the particles. This showed that the nanofibers have better performance than the micro particles and as such have potential to replace the particle based SPE sorbents that are currently in use. All the templates were optimally removed from the prepared MIPs by employing a novel pressurized hot water extraction template removal method that was used for the first time in this thesis. The method employed only water, an environmentally friendly solvent to remove templates to ≥ 99.6% with template residual bleeding of ≤ 0.02%.
- Full Text:
- Date Issued: 2012
The solubility of mercurous chloride in water at 25°C
- Authors: Clur, Dennis Alwin
- Date: 1959
- Subjects: Mercury compounds -- Solubility , Mercuric chloride
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4522 , http://hdl.handle.net/10962/d1014705
- Description: [From Introduction]. In 1955, Dry and Gledhill, both formerly of this Department, published their paper on the Solubility of Mercurous Chloride in Water at 25°0, and it was originally intended that this thesis should be an extension of the study to cover the temperature range from 5 t o 55°0. A preliminary investigation at 25°0, however, failed to yield results which were consistent with their findings, even though their apparatus and experimental technique were used. In an effort to resolve these difficulties their method of saturating the calomel in the conductance cell was thoroughly investigated, and as this procedure was found to be responsible, it was necessary to evolve an entirely new approach. The technique finally adopted was to saturate the mercurous chloride solutions by mechanical stirring in siliconed vessels and to carry out the conductance, pH, and total mercury concentration measurements on the filter ed solution. This method gave good results, and was free from the many extrapolations prevalent in the original procedure.
- Full Text:
- Date Issued: 1959
- Authors: Clur, Dennis Alwin
- Date: 1959
- Subjects: Mercury compounds -- Solubility , Mercuric chloride
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4522 , http://hdl.handle.net/10962/d1014705
- Description: [From Introduction]. In 1955, Dry and Gledhill, both formerly of this Department, published their paper on the Solubility of Mercurous Chloride in Water at 25°0, and it was originally intended that this thesis should be an extension of the study to cover the temperature range from 5 t o 55°0. A preliminary investigation at 25°0, however, failed to yield results which were consistent with their findings, even though their apparatus and experimental technique were used. In an effort to resolve these difficulties their method of saturating the calomel in the conductance cell was thoroughly investigated, and as this procedure was found to be responsible, it was necessary to evolve an entirely new approach. The technique finally adopted was to saturate the mercurous chloride solutions by mechanical stirring in siliconed vessels and to carry out the conductance, pH, and total mercury concentration measurements on the filter ed solution. This method gave good results, and was free from the many extrapolations prevalent in the original procedure.
- Full Text:
- Date Issued: 1959
Camphor-derived chiral auxiliaries: a synthetic, mechanistic and computational study
- Authors: Duggan, Andrew Robert
- Date: 2007
- Subjects: Camphor Chirality Asymmetric synthesis
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4415 , http://hdl.handle.net/10962/d1006772
- Description: A broadly based approach has been undertaken to the development and use of camphor derivatives as chiral auxiliaries in asymmetric synthesis – an approach which has embraced synthetic, mechanistic and computational studies. The unambiguous characterization of mono- and dihydroxy-derivatives, obtained by reduction of chiral camphor ether dimers, has been achieved through detailed one- and two-dimensional NMR spectroscopic analysis. The resulting data has been used to establish both the regio- and stereochemistry of the hydroxyl groups. A camphor-derived cyclic iminolactone has been shown to provide a convenient platform for the synthesis of chiral α-amino acids, stereoselective monoalkylation of the iminolactone affording a range of products in yields of 52 - 65 % with up to 85 % d.e. The attempted development of chiral bifunctional Morita-Baylis-Hillman substrates has revealed an unexpected equilibration between isomeric bornane 2,3-diol monoacrylates via acid-catalysed intramolecular transesterification. A detailed [superscript 1]H NMR-based kinetic study of the rearrangement in various media and at various temperatures has permitted the determination of the kinetic and thermodynamic parameters. A computational study at the DFT level has been used to explore the potential energy surfaces of the acid-catalysed and uncatalysed transesterification of the monoacrylate esters. The theoretical data supports the involvement of cyclic intermediates and has provided a rational basis for predicting the favoured reaction pathways. Novel camphor-derived phenyl sulfonate esters and N-adamantylsulfonamides have been synthesised for use as chiral auxiliaries in the Morita-Baylis-Hillman reaction. Modeling at the Molecular Mechanics level has provided useful insights into possible conformational constraints and an adamantyl sulfonate auxiliary has been successfully used in the stereoselective synthesis of a range of products, generally in excellent yield and with up to 95 % d.e.
- Full Text:
- Date Issued: 2007
- Authors: Duggan, Andrew Robert
- Date: 2007
- Subjects: Camphor Chirality Asymmetric synthesis
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4415 , http://hdl.handle.net/10962/d1006772
- Description: A broadly based approach has been undertaken to the development and use of camphor derivatives as chiral auxiliaries in asymmetric synthesis – an approach which has embraced synthetic, mechanistic and computational studies. The unambiguous characterization of mono- and dihydroxy-derivatives, obtained by reduction of chiral camphor ether dimers, has been achieved through detailed one- and two-dimensional NMR spectroscopic analysis. The resulting data has been used to establish both the regio- and stereochemistry of the hydroxyl groups. A camphor-derived cyclic iminolactone has been shown to provide a convenient platform for the synthesis of chiral α-amino acids, stereoselective monoalkylation of the iminolactone affording a range of products in yields of 52 - 65 % with up to 85 % d.e. The attempted development of chiral bifunctional Morita-Baylis-Hillman substrates has revealed an unexpected equilibration between isomeric bornane 2,3-diol monoacrylates via acid-catalysed intramolecular transesterification. A detailed [superscript 1]H NMR-based kinetic study of the rearrangement in various media and at various temperatures has permitted the determination of the kinetic and thermodynamic parameters. A computational study at the DFT level has been used to explore the potential energy surfaces of the acid-catalysed and uncatalysed transesterification of the monoacrylate esters. The theoretical data supports the involvement of cyclic intermediates and has provided a rational basis for predicting the favoured reaction pathways. Novel camphor-derived phenyl sulfonate esters and N-adamantylsulfonamides have been synthesised for use as chiral auxiliaries in the Morita-Baylis-Hillman reaction. Modeling at the Molecular Mechanics level has provided useful insights into possible conformational constraints and an adamantyl sulfonate auxiliary has been successfully used in the stereoselective synthesis of a range of products, generally in excellent yield and with up to 95 % d.e.
- Full Text:
- Date Issued: 2007
Formulation and evaluation of liposomal films for buccal delivery of antiretroviral drug
- Authors: Okafor, Nnamdi Ikemefuna
- Date: 2020
- Subjects: Liposomes , Highly active antiretroviral therapy , Antiretroviral agents , HIV infections -- Prevention
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/117161 , vital:34485
- Description: The human immune deficiency virus (HIV) infection has been ranked as one of the most devastating microbial infections in the world. This status is a result of the HIV rapid genetic variation, which limits discovery of a vaccine. Use application of antiretroviral therapy (ARVT) in treatment of the disease caused by the HIV infection (known as acquired immunodeficiency syndrome, HIV-AIDS) is frequently compromised by several factors such as the low bioavailability and severe adverse effects associated with the existing antiretroviral drugs (ARVDs). This underlines the need for controlling the pharmacokinetics profiles of ARVD using effective vehicles that can modify drug biodistribution. The same is true for many other conditions, where delivery systems can determine the success or failure of treatment by controlling pharmacokinetic and dynamic properties. The mucosal linings of the oral cavities in addition offer adorable route of administration for systematic drug delivery, improving drug therapeutic performance and often preferred by clinicians and patients. Liposomes are tiny spherical sacs of phospholipid molecules enclosing water droplets, formed (artificially) to carry drugs or other substances into the tissues by crossing and targeting to specific organelles. This work therefore focused on preparation of liposomes and liposomal buccal films (BFs) for potential buccal delivery of efavirenz, an ARVD model endowed with poor solubility and several side effects. The liposomes were prepared by thin film hydration method using crude soybean lecithin (CL) and cholesterol. Efavirenz loaded liposomes were evaluated for particle size, Zeta potential (ZP), morphology, encapsulation efficiency (EE%) and release kinetics studies. The physiochemical properties of the liposomes were also evaluated using Differential Scanning Calorimetry (DSC), X-ray diffraction (XRD), energy dispersity spectroscopy (EDS), and Fourier transform infrared (FTIR), while the formulation with the best encapsulation efficiency was used as the solvent medium for the buccal film formation. The buccal films were prepared using solvent casting method, where the liposomal suspension was used as the dispersing medium. The films were optimized for physical properties (thickness, weight variation and folding endurance) using digital Vernier calliper and digital weighing balance. The physiochemical properties of the selected BFs films made of Carbopol (CP) and its combination with Pluronic F127 (PF127) were further characterized using XRD, DSC, FTIR, Transmission Electron Microscopy (TEM), EDS and Scanning Electron Microscopy (SEM). The permeation study of the selected BFs was investigated using Franz diffusion cell. The BFs composed of CP alone or its combination with PF127 demonstrated much better bio-adhesive properties than the films made of other polymers (like Hydroxyl propyl methyl cellulose, HPMC) alone or in combination with PF127. The developed liposome formulation showed high encapsulation 98.8 ± 0.01 % in CL to cholesterol mass ratio of 1:1 and total lipid to drug mass ratio of 2:1. The average particle size 104.82 ± 2.29 nm and Zeta potential -50.33 ± 0.95 mV of these liposomes were found to be attractive for targeted delivery to the HIV infected cells. The CP based BFs (without and with PF127) exhibited good film thickness 0.88 ± 0.10 and 0.76 ± 0.14 mm, with weight uniformity 68.22 ± 1.04 and 86.28 ± 2. 16 mg, satisfactory flexibility values 258 and 321, and slightly acidic pH 6.43 ± 0.76 and 6.32 ± 0.01. The swelling percentage was found to be 50 % for CP film alone and 78 % for CP film with PF127. The cumulative amount of drug that permeated through the buccal epithelium over 24 hours was about 66 % from CP film alone and 75 % from CP film with PF127. Since no evidence of the liposomal encapsulation of EFV have been reported to our knowledge, we find the insights from the present study valuable as a set of preliminary data to encourage further investigations of the encapsulation and delivery of EFV like antiretrovirals for enhanced solubility, site targeting and prolonged release using crude soybean lecithin and mucoadhesive polymers, which holds some added economical values as naturally occurring lipid and polymeric mixtures as a promising delivery systems for buccal delivery of ARVDs.
- Full Text:
- Date Issued: 2020
- Authors: Okafor, Nnamdi Ikemefuna
- Date: 2020
- Subjects: Liposomes , Highly active antiretroviral therapy , Antiretroviral agents , HIV infections -- Prevention
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/117161 , vital:34485
- Description: The human immune deficiency virus (HIV) infection has been ranked as one of the most devastating microbial infections in the world. This status is a result of the HIV rapid genetic variation, which limits discovery of a vaccine. Use application of antiretroviral therapy (ARVT) in treatment of the disease caused by the HIV infection (known as acquired immunodeficiency syndrome, HIV-AIDS) is frequently compromised by several factors such as the low bioavailability and severe adverse effects associated with the existing antiretroviral drugs (ARVDs). This underlines the need for controlling the pharmacokinetics profiles of ARVD using effective vehicles that can modify drug biodistribution. The same is true for many other conditions, where delivery systems can determine the success or failure of treatment by controlling pharmacokinetic and dynamic properties. The mucosal linings of the oral cavities in addition offer adorable route of administration for systematic drug delivery, improving drug therapeutic performance and often preferred by clinicians and patients. Liposomes are tiny spherical sacs of phospholipid molecules enclosing water droplets, formed (artificially) to carry drugs or other substances into the tissues by crossing and targeting to specific organelles. This work therefore focused on preparation of liposomes and liposomal buccal films (BFs) for potential buccal delivery of efavirenz, an ARVD model endowed with poor solubility and several side effects. The liposomes were prepared by thin film hydration method using crude soybean lecithin (CL) and cholesterol. Efavirenz loaded liposomes were evaluated for particle size, Zeta potential (ZP), morphology, encapsulation efficiency (EE%) and release kinetics studies. The physiochemical properties of the liposomes were also evaluated using Differential Scanning Calorimetry (DSC), X-ray diffraction (XRD), energy dispersity spectroscopy (EDS), and Fourier transform infrared (FTIR), while the formulation with the best encapsulation efficiency was used as the solvent medium for the buccal film formation. The buccal films were prepared using solvent casting method, where the liposomal suspension was used as the dispersing medium. The films were optimized for physical properties (thickness, weight variation and folding endurance) using digital Vernier calliper and digital weighing balance. The physiochemical properties of the selected BFs films made of Carbopol (CP) and its combination with Pluronic F127 (PF127) were further characterized using XRD, DSC, FTIR, Transmission Electron Microscopy (TEM), EDS and Scanning Electron Microscopy (SEM). The permeation study of the selected BFs was investigated using Franz diffusion cell. The BFs composed of CP alone or its combination with PF127 demonstrated much better bio-adhesive properties than the films made of other polymers (like Hydroxyl propyl methyl cellulose, HPMC) alone or in combination with PF127. The developed liposome formulation showed high encapsulation 98.8 ± 0.01 % in CL to cholesterol mass ratio of 1:1 and total lipid to drug mass ratio of 2:1. The average particle size 104.82 ± 2.29 nm and Zeta potential -50.33 ± 0.95 mV of these liposomes were found to be attractive for targeted delivery to the HIV infected cells. The CP based BFs (without and with PF127) exhibited good film thickness 0.88 ± 0.10 and 0.76 ± 0.14 mm, with weight uniformity 68.22 ± 1.04 and 86.28 ± 2. 16 mg, satisfactory flexibility values 258 and 321, and slightly acidic pH 6.43 ± 0.76 and 6.32 ± 0.01. The swelling percentage was found to be 50 % for CP film alone and 78 % for CP film with PF127. The cumulative amount of drug that permeated through the buccal epithelium over 24 hours was about 66 % from CP film alone and 75 % from CP film with PF127. Since no evidence of the liposomal encapsulation of EFV have been reported to our knowledge, we find the insights from the present study valuable as a set of preliminary data to encourage further investigations of the encapsulation and delivery of EFV like antiretrovirals for enhanced solubility, site targeting and prolonged release using crude soybean lecithin and mucoadhesive polymers, which holds some added economical values as naturally occurring lipid and polymeric mixtures as a promising delivery systems for buccal delivery of ARVDs.
- Full Text:
- Date Issued: 2020
The synthesis and properties of some polymer hydrogels
- Authors: Hird, Bryn
- Date: 1984 , 2013-04-05
- Subjects: Colloids
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4428 , http://hdl.handle.net/10962/d1006975 , Colloids
- Description: The interactions between water molecules and polyelectrolyte species in aqueous solutions are reviewed and are used to infer interactions occuring in swollen crosslinked polyelectrolyte hydrogels. Linear poly(acrylic acid ) and derivatives neutralised to varying degrees with alkali-metal hydroxides are prepared and characterised. Samples of these compounds are crosslinked by 'Y - irradiation to form hydrogels. Hydration studies on linear polymers, crosslinked material and a commercial polyacrylate hydrogel indicate a possible hydration structure and provide some insight into the nature of water-polymer interactions within a sHollen polyacrylate gel. , KMBT_363 , Adobe Acrobat 9.53 Paper Capture Plug-in
- Full Text:
- Date Issued: 1984
- Authors: Hird, Bryn
- Date: 1984 , 2013-04-05
- Subjects: Colloids
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4428 , http://hdl.handle.net/10962/d1006975 , Colloids
- Description: The interactions between water molecules and polyelectrolyte species in aqueous solutions are reviewed and are used to infer interactions occuring in swollen crosslinked polyelectrolyte hydrogels. Linear poly(acrylic acid ) and derivatives neutralised to varying degrees with alkali-metal hydroxides are prepared and characterised. Samples of these compounds are crosslinked by 'Y - irradiation to form hydrogels. Hydration studies on linear polymers, crosslinked material and a commercial polyacrylate hydrogel indicate a possible hydration structure and provide some insight into the nature of water-polymer interactions within a sHollen polyacrylate gel. , KMBT_363 , Adobe Acrobat 9.53 Paper Capture Plug-in
- Full Text:
- Date Issued: 1984
Studies in asymmetric synthesis
- Authors: Learmonth, Robin Alec
- Date: 1991
- Subjects: Organic compounds -- Synthesis Stereochemistry Organosilicon compounds Chirality Chemical tests and reagents
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4353 , http://hdl.handle.net/10962/d1005018
- Description: The concept of combining two well established areas of organic chemistry, viz., organosilicon chemistry and the use of chiral auxiliaries, into a viable, alternative method of asymmetric synthesis has only very recently begun to receive attention. At the outset of this investigation, no asymmetric reactions of silyl enol ethers, chiral by virtue of optically active substituents on the silicon, had been reported. A range of novel chiral silyl enol ethers have thus been prepared from a variety of ketones, including pinacolone, cyclohexanone, and α-tetralone, and employing menthol, borneol, and cholesterol as chiral auxiliaries. These preparations have been achieved via several distinct routes, including a novel convergent approach involving the isolation of either the chloro(menthyloxy)dimethylsilane or the (bornyloxy)chlorodimethylsilane. The MS and NMR spectra of these silyl enol ethers were examined in detail and, in the case of the crystalline cholesteryloxy silyl enol ether, the X-ray structure has been determined. The potential of chloroalkoxysilanes to act as general, chiral derivatizing agents has been established by the preparation of diastereomeric silyl acetal mixtures of racemic secondary alcohols (e.g. I-phenylethanol and 2-octanol). The experimental diastereomeric ratios, obtained by GLC and ¹H NMR spectroscopy, approached the expected value of unity, confirming the potential of the alkoxychlorosilanes as chiral probes. The chiral silyl enol ethers have been successfully oxidized to the corresponding α-siloxy ketones employing MCPBA, MMPP, and 2-(phenylsulphonyl)-3-phenyloxaziridine as oxidizing agents and the diastereomeric excesses obtained, which varied from 0 to 16%, indicated some potential for stereochemical control. Alkylation and hydroxyalkylation reactions of the silyl enol ethers have yielded the expected α-iert-butyl and β-hydroxy ketones in good to excellent material yields, with the enantiomeric excesses, as determined by chiral shift reagent studies, reaching 14%. To improve the stereo control in these reactions, attempts have been made to prepare chiral silyl enol ethers with auxiliaries possessing the potential for transition state complex co-ordination in the reactions under consideration. The preparation of such silyl enol ethers, incorporating the proline-derived auxiliaries, N-methyl-2-hydroxymethylpyrrolidine and 2-methoxymethylpyrrolidine met with only limited success. In an alternative approach, three derivatives of 2,3-dihydroxybornane have been prepared. However, two of these auxiliaries, viz., 3-exo-benzyloxy-2-exo-hydroxybornane and 3-exo-(1-methoxyethoxy)-2-exo-hydroxybornane failed to form silyl enol ethers, even under considerably more vigorous conditions than normally employed. The third derivative, 3,3-ethylenedioxy-2-hydroxybornane has been successfully utilized in the preparation of a pinacolone-derived chiral silyl enol ether. Hydroxyalkylation of this compound with benzaldehyde has yielded the β-hydroxyketone with significantly improved enantiomeric excess (26%) and a transition state complex has been proposed to rationalize this improvement.
- Full Text:
- Date Issued: 1991
- Authors: Learmonth, Robin Alec
- Date: 1991
- Subjects: Organic compounds -- Synthesis Stereochemistry Organosilicon compounds Chirality Chemical tests and reagents
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4353 , http://hdl.handle.net/10962/d1005018
- Description: The concept of combining two well established areas of organic chemistry, viz., organosilicon chemistry and the use of chiral auxiliaries, into a viable, alternative method of asymmetric synthesis has only very recently begun to receive attention. At the outset of this investigation, no asymmetric reactions of silyl enol ethers, chiral by virtue of optically active substituents on the silicon, had been reported. A range of novel chiral silyl enol ethers have thus been prepared from a variety of ketones, including pinacolone, cyclohexanone, and α-tetralone, and employing menthol, borneol, and cholesterol as chiral auxiliaries. These preparations have been achieved via several distinct routes, including a novel convergent approach involving the isolation of either the chloro(menthyloxy)dimethylsilane or the (bornyloxy)chlorodimethylsilane. The MS and NMR spectra of these silyl enol ethers were examined in detail and, in the case of the crystalline cholesteryloxy silyl enol ether, the X-ray structure has been determined. The potential of chloroalkoxysilanes to act as general, chiral derivatizing agents has been established by the preparation of diastereomeric silyl acetal mixtures of racemic secondary alcohols (e.g. I-phenylethanol and 2-octanol). The experimental diastereomeric ratios, obtained by GLC and ¹H NMR spectroscopy, approached the expected value of unity, confirming the potential of the alkoxychlorosilanes as chiral probes. The chiral silyl enol ethers have been successfully oxidized to the corresponding α-siloxy ketones employing MCPBA, MMPP, and 2-(phenylsulphonyl)-3-phenyloxaziridine as oxidizing agents and the diastereomeric excesses obtained, which varied from 0 to 16%, indicated some potential for stereochemical control. Alkylation and hydroxyalkylation reactions of the silyl enol ethers have yielded the expected α-iert-butyl and β-hydroxy ketones in good to excellent material yields, with the enantiomeric excesses, as determined by chiral shift reagent studies, reaching 14%. To improve the stereo control in these reactions, attempts have been made to prepare chiral silyl enol ethers with auxiliaries possessing the potential for transition state complex co-ordination in the reactions under consideration. The preparation of such silyl enol ethers, incorporating the proline-derived auxiliaries, N-methyl-2-hydroxymethylpyrrolidine and 2-methoxymethylpyrrolidine met with only limited success. In an alternative approach, three derivatives of 2,3-dihydroxybornane have been prepared. However, two of these auxiliaries, viz., 3-exo-benzyloxy-2-exo-hydroxybornane and 3-exo-(1-methoxyethoxy)-2-exo-hydroxybornane failed to form silyl enol ethers, even under considerably more vigorous conditions than normally employed. The third derivative, 3,3-ethylenedioxy-2-hydroxybornane has been successfully utilized in the preparation of a pinacolone-derived chiral silyl enol ether. Hydroxyalkylation of this compound with benzaldehyde has yielded the β-hydroxyketone with significantly improved enantiomeric excess (26%) and a transition state complex has been proposed to rationalize this improvement.
- Full Text:
- Date Issued: 1991
Synthesis, spectroscopic and nonlinear optical properties of metal-free and nickel β substituted binuclear phthalocyanines
- Authors: Kabwe, Kapambwe Peter
- Date: 2016
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/3013 , vital:20352
- Description: In this project, nickel and metal-free 4β-(4-tert-butylphenoxy) phthalocyanine, biphenyl bridged binuclear 4-tert-butylphenoxy phthalocyanine and naphthalene bridged binuclear 4-tert-butylphenoxy phthalocyanine have been synthesised. The Z-scan technique has been employed to comparatively study their second order nonlinear optical (NLO) properties. This work, shows that the presence of H-aggregation in binuclear Pcs of metal-free and nickel 4β-(4-tertbutylphenoxy) phthalocyanines do not have an effect on the magnitude of second order nonlinear absorption coefficient (β) as compared to monomeric Pcs. Density functional (DFT) calculations of dipolar/octupolar contributions were performed, in order to explain experimentally determined β values. Spectroscopic and photophysical properties of the synthesised compounds have been determined using a range of different spectroscopic techniques, including magnetic circular dichroism (MCD), time correlated single photon counting spectroscopy (TCSPC), UV-visible absorption spectroscopy, mass spectroscopy and IR Spectroscopy.
- Full Text:
- Date Issued: 2016
- Authors: Kabwe, Kapambwe Peter
- Date: 2016
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/3013 , vital:20352
- Description: In this project, nickel and metal-free 4β-(4-tert-butylphenoxy) phthalocyanine, biphenyl bridged binuclear 4-tert-butylphenoxy phthalocyanine and naphthalene bridged binuclear 4-tert-butylphenoxy phthalocyanine have been synthesised. The Z-scan technique has been employed to comparatively study their second order nonlinear optical (NLO) properties. This work, shows that the presence of H-aggregation in binuclear Pcs of metal-free and nickel 4β-(4-tertbutylphenoxy) phthalocyanines do not have an effect on the magnitude of second order nonlinear absorption coefficient (β) as compared to monomeric Pcs. Density functional (DFT) calculations of dipolar/octupolar contributions were performed, in order to explain experimentally determined β values. Spectroscopic and photophysical properties of the synthesised compounds have been determined using a range of different spectroscopic techniques, including magnetic circular dichroism (MCD), time correlated single photon counting spectroscopy (TCSPC), UV-visible absorption spectroscopy, mass spectroscopy and IR Spectroscopy.
- Full Text:
- Date Issued: 2016
BODIPY and porphyrin dyes for direct glucose sensing and optical limiting applications
- Authors: Ndebele, Nobuhle
- Date: 2019
- Subjects: Boron compounds , Boric acid , Porphyrins , Dyes and dying -- Chemistry
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/97221 , vital:31412
- Description: A series of BODIPY dyes functionalised with boronic acid in the 3,5-positions were successfully synthesised and characterised by using various analytical techniques. The dyes were prepared through a slight modification of the conventional acid catalysed condensation method. Phenylboronic acid moieties were added as styryl groups at the 3,5-positions of the 1,3,5,7-tetrametylBODIPY cores using a modified Knoevengal condensation method. The addition of the styryls resulted in the main absorption band of the dyes red-shifting to the 630−650 nm region. The photophysical and electrochemical properties of these dyes were studied to determine whether the dyes are suitable for use in the fluorescent, colourimetric and electrochemical detection of glucose. Boronic acid moieties were added as bioreceptor recognition elements because they have an affinity for carbohydrates and therefore would be able to bind and “detect” glucose. The series of BODIPY dyes did not show a “turn-on” fluorescence effect upon addition with glucose at the physiological pH. This was attributed on the basis of molecular modelling to the absence of an MO localised on the boronic-acid-substituted styryl moieties that lie close in energy to the HOMO and LUMO that facilitates the formation of an intramolecular charge transfer state. However, colourimetric changes that are visible to the naked eye are observed at basic pH when glucose was added to the dye solutions. The dyes exhibited favourable electrochemical behaviour and were able to detect glucose directly in this context when glassy carbon electrodes are modified through the drop dry method. A series of Sn(IV) porphyrins with thienyl and phenyl groups at the meso-positions were successfully synthesised and characterised. Pyridine and tetrabutyl axial ligands were added to the porphyrins to limit aggregation. The optical limiting properties of these porphyrins and three styrylated BODIPY dyes were studied in benzene and dichloromethane. Dyes were also embedded in polystyrene and studied as thin films to further gauge their suitability for use in optical limiting applications. Second-order hyperpolarizability, third-order susceptibly, non-linear absorption with reversible saturable absorption and the optical limiting threshold, were the parameters studied. Three of the four porphyrins and the three styrylated BODIPY dyes showed favourable optical limiting behaviour, which was further enhanced when the dyes are embedded in polymer thin films.
- Full Text:
- Date Issued: 2019
- Authors: Ndebele, Nobuhle
- Date: 2019
- Subjects: Boron compounds , Boric acid , Porphyrins , Dyes and dying -- Chemistry
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/97221 , vital:31412
- Description: A series of BODIPY dyes functionalised with boronic acid in the 3,5-positions were successfully synthesised and characterised by using various analytical techniques. The dyes were prepared through a slight modification of the conventional acid catalysed condensation method. Phenylboronic acid moieties were added as styryl groups at the 3,5-positions of the 1,3,5,7-tetrametylBODIPY cores using a modified Knoevengal condensation method. The addition of the styryls resulted in the main absorption band of the dyes red-shifting to the 630−650 nm region. The photophysical and electrochemical properties of these dyes were studied to determine whether the dyes are suitable for use in the fluorescent, colourimetric and electrochemical detection of glucose. Boronic acid moieties were added as bioreceptor recognition elements because they have an affinity for carbohydrates and therefore would be able to bind and “detect” glucose. The series of BODIPY dyes did not show a “turn-on” fluorescence effect upon addition with glucose at the physiological pH. This was attributed on the basis of molecular modelling to the absence of an MO localised on the boronic-acid-substituted styryl moieties that lie close in energy to the HOMO and LUMO that facilitates the formation of an intramolecular charge transfer state. However, colourimetric changes that are visible to the naked eye are observed at basic pH when glucose was added to the dye solutions. The dyes exhibited favourable electrochemical behaviour and were able to detect glucose directly in this context when glassy carbon electrodes are modified through the drop dry method. A series of Sn(IV) porphyrins with thienyl and phenyl groups at the meso-positions were successfully synthesised and characterised. Pyridine and tetrabutyl axial ligands were added to the porphyrins to limit aggregation. The optical limiting properties of these porphyrins and three styrylated BODIPY dyes were studied in benzene and dichloromethane. Dyes were also embedded in polystyrene and studied as thin films to further gauge their suitability for use in optical limiting applications. Second-order hyperpolarizability, third-order susceptibly, non-linear absorption with reversible saturable absorption and the optical limiting threshold, were the parameters studied. Three of the four porphyrins and the three styrylated BODIPY dyes showed favourable optical limiting behaviour, which was further enhanced when the dyes are embedded in polymer thin films.
- Full Text:
- Date Issued: 2019