Application of gold and palladium nanoparticles supported on polymelamine microspheres in the oxidation of 1-phenylethanol and some other phenyl substituted alcohols
- Storm, Ené, Maggott, Emile D, Mashazi, Philani N, Nyokong, Tebello, Malgas-Enus, Rehana, Mapolie, Selwyn F
- Authors: Storm, Ené , Maggott, Emile D , Mashazi, Philani N , Nyokong, Tebello , Malgas-Enus, Rehana , Mapolie, Selwyn F
- Date: 2022
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/299824 , vital:57858 , xlink:href="https://doi.org/10.1016/j.mcat.2022.112456"
- Description: Melamine formaldehyde and melamine resorcinol formaldehyde microspheres were decorated with Au and Pd nanoparticles and applied as heterogeneous catalysts in the oxidation of 1-phenylethanol. The catalysts showed similar activities irrespective of the support employed. Moderate conversion activities of 48–50% were achieved when using acetonitrile as solvent; however, when employing water as solvent, the supported catalysts formed a three-phase, emulsion system which facilitated the catalytic conversion of 1-phenylethanol to acetophenone at much higher conversions of around 83%. The oxidant, TBHP, decomposed rapidly in acetonitrile, whilst it remained stable in aqueous solution, leading to the enhanced activities observed when using water as solvent. These systems also proved to be recyclable for up to five cycles, with only slight loss of activity observed; this can be attributed to the physical loss of catalyst during the workup procedure conducted between each cycle.
- Full Text:
- Date Issued: 2022
- Authors: Storm, Ené , Maggott, Emile D , Mashazi, Philani N , Nyokong, Tebello , Malgas-Enus, Rehana , Mapolie, Selwyn F
- Date: 2022
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/299824 , vital:57858 , xlink:href="https://doi.org/10.1016/j.mcat.2022.112456"
- Description: Melamine formaldehyde and melamine resorcinol formaldehyde microspheres were decorated with Au and Pd nanoparticles and applied as heterogeneous catalysts in the oxidation of 1-phenylethanol. The catalysts showed similar activities irrespective of the support employed. Moderate conversion activities of 48–50% were achieved when using acetonitrile as solvent; however, when employing water as solvent, the supported catalysts formed a three-phase, emulsion system which facilitated the catalytic conversion of 1-phenylethanol to acetophenone at much higher conversions of around 83%. The oxidant, TBHP, decomposed rapidly in acetonitrile, whilst it remained stable in aqueous solution, leading to the enhanced activities observed when using water as solvent. These systems also proved to be recyclable for up to five cycles, with only slight loss of activity observed; this can be attributed to the physical loss of catalyst during the workup procedure conducted between each cycle.
- Full Text:
- Date Issued: 2022
Characterization of electrodes modified by one pot or step by step electro-click reaction and axial ligation of iron tetracarboxyphthalocyanine
- Maringa, Audacity, Mashazi, Philani N, Nyokong, Tebello
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/193892 , vital:45403 , xlink:href="https://doi.org/10.1016/j.electacta.2014.09.011"
- Description: The modification of the glassy carbon electrode (GCE) was carried out using two methods. The first method is simultaneous electropolymerization and electro-click followed by immersion into a solution of dimethyl formamide (DMF) containing FeTCPc. The second method is step by step whereby electropolymerization is carried out first followed by electro-click and then immersion into a DMF solution containing FeTCPc. From the electrochemical characterization, it was observed that the second route (step by step method) was the best as indicated by the ferricyanide studies (cyclic voltammetry and scanning electrochemical microscopy). In the electrooxidation of hydrazine, we obtained a potential of 0.26 V. Of interest were the detection limit of 6.4 μM and the catalytic rate constant of 2.1 × 109 cm3 mol−1 s−1. This shows that the sensor can be used for the electrooxidation of hydrazine.
- Full Text:
- Date Issued: 2014
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Date: 2014
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/193892 , vital:45403 , xlink:href="https://doi.org/10.1016/j.electacta.2014.09.011"
- Description: The modification of the glassy carbon electrode (GCE) was carried out using two methods. The first method is simultaneous electropolymerization and electro-click followed by immersion into a solution of dimethyl formamide (DMF) containing FeTCPc. The second method is step by step whereby electropolymerization is carried out first followed by electro-click and then immersion into a DMF solution containing FeTCPc. From the electrochemical characterization, it was observed that the second route (step by step method) was the best as indicated by the ferricyanide studies (cyclic voltammetry and scanning electrochemical microscopy). In the electrooxidation of hydrazine, we obtained a potential of 0.26 V. Of interest were the detection limit of 6.4 μM and the catalytic rate constant of 2.1 × 109 cm3 mol−1 s−1. This shows that the sensor can be used for the electrooxidation of hydrazine.
- Full Text:
- Date Issued: 2014
Characterization of electrodes modified by one pot or step by step electro-click reaction and axial ligation of iron tetracarboxyphthalocyanine
- Maringa, Audacity, Mashazi, Philani N, Nyokong, Tebello
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7307 , http://hdl.handle.net/10962/d1020384
- Description: The modification of the glassy carbon electrode (GCE) was carried out using two methods. The first method is simultaneous electropolymerization and electro-click followed by immersion into a solution of dimethyl formamide (DMF) containing FeTCPc. The second method is step by step whereby electropolymerization is carried out first followed by electro-click and then immersion into a DMF solution containing FeTCPc. From the electrochemical characterization, it was observed that the second route (step by step method) was the best as indicated by the ferricyanide studies (cyclic voltammetry and scanning electrochemical microscopy). In the electrooxidation of hydrazine, we obtained a potential of 0.26 V. Of interest were the detection limit of 6.4 μM and the catalytic rate constant of 2.1 × 109 cm3 mol−1 s−1. This shows that the sensor can be used for the electrooxidation of hydrazine. , Original publication is available at http://dx.doi.org/10.1016/j.electacta.2014.09.011
- Full Text: false
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7307 , http://hdl.handle.net/10962/d1020384
- Description: The modification of the glassy carbon electrode (GCE) was carried out using two methods. The first method is simultaneous electropolymerization and electro-click followed by immersion into a solution of dimethyl formamide (DMF) containing FeTCPc. The second method is step by step whereby electropolymerization is carried out first followed by electro-click and then immersion into a DMF solution containing FeTCPc. From the electrochemical characterization, it was observed that the second route (step by step method) was the best as indicated by the ferricyanide studies (cyclic voltammetry and scanning electrochemical microscopy). In the electrooxidation of hydrazine, we obtained a potential of 0.26 V. Of interest were the detection limit of 6.4 μM and the catalytic rate constant of 2.1 × 109 cm3 mol−1 s−1. This shows that the sensor can be used for the electrooxidation of hydrazine. , Original publication is available at http://dx.doi.org/10.1016/j.electacta.2014.09.011
- Full Text: false
Critical assessment of the quartz crystal microbalance with dissipation as an analytical tool for biosensor development and fundamental studies
- Fogel, Ronen, Mashazi, Philani N, Nyokong, Tebello, Limson, Janice
- Authors: Fogel, Ronen , Mashazi, Philani N , Nyokong, Tebello , Limson, Janice
- Date: 2007
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/271204 , vital:54521 , xlink:href="https://doi.org/10.1016/j.bios.2007.03.012"
- Description: One of the challenges in electrochemical biosensor design is gaining a fundamental knowledge of the processes underlying immobilisation of the molecules onto the electrode surface. This is of particular importance in biocomposite sensors where concerns have arisen as to the nature of the interaction between the biological and synthetic molecules immobilised. We examined the use of the Quartz Crystal Microbalance with Dissipation (QCM-D) as a tool for fundamental analyses of a model sensor constructed by the immobilisation of cobalt(II) phthalocyanine (TCACoPc) and glucose oxidase (GOx) onto a gold-quartz electrode (electrode surface) for the enhanced detection of glucose. The model sensor was constructed in aqueous phase and covalently linked the gold surface to the TCACoPc, and the TCACoPc to the GOx, using the QCM-D. The aqueous metallophthalocyanine (MPc) formed a multi-layer over the surface of the electrode, which could be removed to leave a monolayer with a mass loading that compared favourably to the theoretical value expected. Analysis of frequency and dissipation plots indicated covalent attachment of glucose oxidase onto the metallophthalocyanine layer. The amount of GOx bound using the model system compared favourably to calculations derived from the maximal amperometric functioning of the electrochemical sensor (examined in previously-published literature, Mashazi, P.N., Ozoemena, K.I., Nyokong, T., 2006. Electrochim. Acta 52, 177–186), but not to theoretical values derived from dimensions of GOx as established by crystallography. The strength of the binding of the GOx film with the TCACoPc layer was tested by using 2% SDS as a denaturant/surfactant, and the GOx film was not found to be significantly affected by exposure to this. This paper thus showed that QCM-D can be used in order to model essential processes and interactions that dictate the functional parameters of a biosensor.
- Full Text:
- Date Issued: 2007
- Authors: Fogel, Ronen , Mashazi, Philani N , Nyokong, Tebello , Limson, Janice
- Date: 2007
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/271204 , vital:54521 , xlink:href="https://doi.org/10.1016/j.bios.2007.03.012"
- Description: One of the challenges in electrochemical biosensor design is gaining a fundamental knowledge of the processes underlying immobilisation of the molecules onto the electrode surface. This is of particular importance in biocomposite sensors where concerns have arisen as to the nature of the interaction between the biological and synthetic molecules immobilised. We examined the use of the Quartz Crystal Microbalance with Dissipation (QCM-D) as a tool for fundamental analyses of a model sensor constructed by the immobilisation of cobalt(II) phthalocyanine (TCACoPc) and glucose oxidase (GOx) onto a gold-quartz electrode (electrode surface) for the enhanced detection of glucose. The model sensor was constructed in aqueous phase and covalently linked the gold surface to the TCACoPc, and the TCACoPc to the GOx, using the QCM-D. The aqueous metallophthalocyanine (MPc) formed a multi-layer over the surface of the electrode, which could be removed to leave a monolayer with a mass loading that compared favourably to the theoretical value expected. Analysis of frequency and dissipation plots indicated covalent attachment of glucose oxidase onto the metallophthalocyanine layer. The amount of GOx bound using the model system compared favourably to calculations derived from the maximal amperometric functioning of the electrochemical sensor (examined in previously-published literature, Mashazi, P.N., Ozoemena, K.I., Nyokong, T., 2006. Electrochim. Acta 52, 177–186), but not to theoretical values derived from dimensions of GOx as established by crystallography. The strength of the binding of the GOx film with the TCACoPc layer was tested by using 2% SDS as a denaturant/surfactant, and the GOx film was not found to be significantly affected by exposure to this. This paper thus showed that QCM-D can be used in order to model essential processes and interactions that dictate the functional parameters of a biosensor.
- Full Text:
- Date Issued: 2007
Design and evaluation of an electrochemical immunosensor for measles serodiagnosis using measles-specific Immunoglobulin G antibodies
- Mashazi, Philani N, Vilakazi, Sibulelo, Nyokong, Tebello
- Authors: Mashazi, Philani N , Vilakazi, Sibulelo , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241705 , vital:50962 , xlink:href="https://doi.org/10.1016/j.talanta.2013.06.036"
- Description: The design of electrochemical immunosensors for the detection of measles-specific antibodies is reported. The measles-antigen modified surface was used as an antibody capture surface. The detection of measles-specific IgG antibodies was accomplished using the voltammetric method and horse-radish peroxidase (HRP) labeled secondary antibody (anti-IgG) as a detecting antibody. The potential applications of the designed immunosensor were evaluated in buffer and serum solutions. The immunosensor exhibited good linearity at concentrations less than 100 ng mL−1 with R2=0.997 and the limit of detection of 6.60 ng mL−1 at 3σ. The potential application of the immunosensor was evaluated in the deliberately infected human and newborn calf serum samples with measles-IgG antibody mimicking real-life samples. The designed electrochemical immunosensor could differentiate between infected and un-infected serum samples as higher catalytic currents were obtained for infected serum samples.
- Full Text:
- Date Issued: 2013
- Authors: Mashazi, Philani N , Vilakazi, Sibulelo , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241705 , vital:50962 , xlink:href="https://doi.org/10.1016/j.talanta.2013.06.036"
- Description: The design of electrochemical immunosensors for the detection of measles-specific antibodies is reported. The measles-antigen modified surface was used as an antibody capture surface. The detection of measles-specific IgG antibodies was accomplished using the voltammetric method and horse-radish peroxidase (HRP) labeled secondary antibody (anti-IgG) as a detecting antibody. The potential applications of the designed immunosensor were evaluated in buffer and serum solutions. The immunosensor exhibited good linearity at concentrations less than 100 ng mL−1 with R2=0.997 and the limit of detection of 6.60 ng mL−1 at 3σ. The potential application of the immunosensor was evaluated in the deliberately infected human and newborn calf serum samples with measles-IgG antibody mimicking real-life samples. The designed electrochemical immunosensor could differentiate between infected and un-infected serum samples as higher catalytic currents were obtained for infected serum samples.
- Full Text:
- Date Issued: 2013
Effects of differently shaped silver nanoparticles on the photophysics of pyridylsulfanyl-substituted phthalocyanines
- D’Souza, Sarah, Mashazi, Philani N, Britton, Jonathan, Nyokong, Tebello
- Authors: D’Souza, Sarah , Mashazi, Philani N , Britton, Jonathan , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7290 , http://hdl.handle.net/10962/d1020353
- Description: This paper reports on the photophysical behavior of (2-pyridylsulfanyl)phthalocyaninato zinc(II) and 2,9(10),16(17),23(24)-tetra-(2-pyridylsulfanyl)phthalocyaninato zinc(II) in the presence of differently shaped silver nanoparticles (nanospheres, nanotriangles and nanoflowers). The presence of shaped nanoparticles increased both triplet quantum yields and lifetimes of the tetra-substituted mercaptopyridine zinc phthalocyanine in DMSO. It is apparent from this work that the shape of the silver nanoparticle used is of little consequence in influencing photophysical behavior of the phthalocyanines. , Original publication is available at http://dx.doi.org/10.1016/j.poly.2015.06.038
- Full Text: false
- Authors: D’Souza, Sarah , Mashazi, Philani N , Britton, Jonathan , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7290 , http://hdl.handle.net/10962/d1020353
- Description: This paper reports on the photophysical behavior of (2-pyridylsulfanyl)phthalocyaninato zinc(II) and 2,9(10),16(17),23(24)-tetra-(2-pyridylsulfanyl)phthalocyaninato zinc(II) in the presence of differently shaped silver nanoparticles (nanospheres, nanotriangles and nanoflowers). The presence of shaped nanoparticles increased both triplet quantum yields and lifetimes of the tetra-substituted mercaptopyridine zinc phthalocyanine in DMSO. It is apparent from this work that the shape of the silver nanoparticle used is of little consequence in influencing photophysical behavior of the phthalocyanines. , Original publication is available at http://dx.doi.org/10.1016/j.poly.2015.06.038
- Full Text: false
Effects of differently shaped silver nanoparticles on the photophysics of pyridylsulfanyl-substituted phthalocyanines
- D'Souza, Sarah, Mashazi, Philani N, Britton, Jonathan, Nyokong, Tebello
- Authors: D'Souza, Sarah , Mashazi, Philani N , Britton, Jonathan , Nyokong, Tebello
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/193564 , vital:45348 , xlink:href="https://doi.org/10.1016/j.poly.2015.06.038"
- Description: This paper reports on the photophysical behavior of (2-pyridylsulfanyl)phthalocyaninato zinc(II) and 2,9(10),16(17),23(24)-tetra-(2-pyridylsulfanyl)phthalocyaninato zinc(II) in the presence of differently shaped silver nanoparticles (nanospheres, nanotriangles and nanoflowers). The presence of shaped nanoparticles increased both triplet quantum yields and lifetimes of the tetra-substituted mercaptopyridine zinc phthalocyanine in DMSO. It is apparent from this work that the shape of the silver nanoparticle used is of little consequence in influencing photophysical behavior of the phthalocyanines.
- Full Text:
- Date Issued: 2015
- Authors: D'Souza, Sarah , Mashazi, Philani N , Britton, Jonathan , Nyokong, Tebello
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/193564 , vital:45348 , xlink:href="https://doi.org/10.1016/j.poly.2015.06.038"
- Description: This paper reports on the photophysical behavior of (2-pyridylsulfanyl)phthalocyaninato zinc(II) and 2,9(10),16(17),23(24)-tetra-(2-pyridylsulfanyl)phthalocyaninato zinc(II) in the presence of differently shaped silver nanoparticles (nanospheres, nanotriangles and nanoflowers). The presence of shaped nanoparticles increased both triplet quantum yields and lifetimes of the tetra-substituted mercaptopyridine zinc phthalocyanine in DMSO. It is apparent from this work that the shape of the silver nanoparticle used is of little consequence in influencing photophysical behavior of the phthalocyanines.
- Full Text:
- Date Issued: 2015
Electrocatalytic activity of bimetallic Au–Pd nanoparticles in the presence of cobalt tetraaminophthalocyanine
- Maringa, Audacity, Mashazi, Philani N, Nyokong, Tebello
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189719 , vital:44925 , xlink:href="https://doi.org/10.1016/j.jcis.2014.10.056"
- Description: Au and Pd nanoparticles were individually or together electrodeposited on top of polymerized cobalt tetraaminophthalocyanine (poly-CoTAPc). When Pd and Au nanoparticles are co-deposited together, the electrode is denoted as Au–Pd (co-deposited)/poly-CoTAPc-GCE. X-ray photoelectron spectroscopy (XPS) was used to show the successful deposition of AuNPs, PdNPs and Au–Pd (co-deposited). The scanning electrochemical microscopy showed that Au–Pd (co-deposited)/poly-CoTAPc-GCE (with current range of 9.5–13.5 lA) was more conducting than Au–Pd (co-deposited)-GCE (with current range of 8–12 lA). Electrochemical impedance spectroscopy (EIS) showed that there was less resistance to charge transfer for Au–Pd (co-deposited)/poly-CoTAPc-GCE compared to the rest of the electrodes. Au–Pd (co-deposited)/poly-CoTAPc-GCE showed the best activity for the electrooxidation of hydrazine in terms of limit of detection (0.5 lM), hence shows promise as an electrocatalyst for electrooxidation of hydrazine.
- Full Text:
- Date Issued: 2015
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189719 , vital:44925 , xlink:href="https://doi.org/10.1016/j.jcis.2014.10.056"
- Description: Au and Pd nanoparticles were individually or together electrodeposited on top of polymerized cobalt tetraaminophthalocyanine (poly-CoTAPc). When Pd and Au nanoparticles are co-deposited together, the electrode is denoted as Au–Pd (co-deposited)/poly-CoTAPc-GCE. X-ray photoelectron spectroscopy (XPS) was used to show the successful deposition of AuNPs, PdNPs and Au–Pd (co-deposited). The scanning electrochemical microscopy showed that Au–Pd (co-deposited)/poly-CoTAPc-GCE (with current range of 9.5–13.5 lA) was more conducting than Au–Pd (co-deposited)-GCE (with current range of 8–12 lA). Electrochemical impedance spectroscopy (EIS) showed that there was less resistance to charge transfer for Au–Pd (co-deposited)/poly-CoTAPc-GCE compared to the rest of the electrodes. Au–Pd (co-deposited)/poly-CoTAPc-GCE showed the best activity for the electrooxidation of hydrazine in terms of limit of detection (0.5 lM), hence shows promise as an electrocatalyst for electrooxidation of hydrazine.
- Full Text:
- Date Issued: 2015
Electrocatalytic activity of bimetallic Au–Pd nanoparticles in the presence of cobalt tetraaminophthalocyanine
- Maringa, Audacity, Mashazi, Philani N, Nyokong, Tebello
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7245 , http://hdl.handle.net/10962/d1020250
- Description: Au and Pd nanoparticles were individually or together electrodeposited on top of polymerized cobalt tetraaminophthalocyanine (poly-CoTAPc). When Pd and Au nanoparticles are co-deposited together, the electrode is denoted as Au–Pd (co-deposited)/poly-CoTAPc-GCE. X-ray photoelectron spectroscopy (XPS) was used to show the successful deposition of AuNPs, PdNPs and Au–Pd (co-deposited). The scanning electrochemical microscopy showed that Au–Pd (co-deposited)/poly-CoTAPc-GCE (with current range of 9.5–13.5 μA) was more conducting than Au–Pd (co-deposited)-GCE (with current range of 8–12 μA). Electrochemical impedance spectroscopy (EIS) showed that there was less resistance to charge transfer for Au–Pd (co-deposited)/poly-CoTAPc-GCE compared to the rest of the electrodes. Au–Pd (co-deposited)/poly-CoTAPc-GCE showed the best activity for the electrooxidation of hydrazine in terms of limit of detection (0.5 μM), hence shows promise as an electrocatalyst for electrooxidation of hydrazine. , Original publication is available at http://dx.doi.org/10.1016/j.jcis.2014.10.056
- Full Text: false
- Authors: Maringa, Audacity , Mashazi, Philani N , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7245 , http://hdl.handle.net/10962/d1020250
- Description: Au and Pd nanoparticles were individually or together electrodeposited on top of polymerized cobalt tetraaminophthalocyanine (poly-CoTAPc). When Pd and Au nanoparticles are co-deposited together, the electrode is denoted as Au–Pd (co-deposited)/poly-CoTAPc-GCE. X-ray photoelectron spectroscopy (XPS) was used to show the successful deposition of AuNPs, PdNPs and Au–Pd (co-deposited). The scanning electrochemical microscopy showed that Au–Pd (co-deposited)/poly-CoTAPc-GCE (with current range of 9.5–13.5 μA) was more conducting than Au–Pd (co-deposited)-GCE (with current range of 8–12 μA). Electrochemical impedance spectroscopy (EIS) showed that there was less resistance to charge transfer for Au–Pd (co-deposited)/poly-CoTAPc-GCE compared to the rest of the electrodes. Au–Pd (co-deposited)/poly-CoTAPc-GCE showed the best activity for the electrooxidation of hydrazine in terms of limit of detection (0.5 μM), hence shows promise as an electrocatalyst for electrooxidation of hydrazine. , Original publication is available at http://dx.doi.org/10.1016/j.jcis.2014.10.056
- Full Text: false
Electrocatalytic behaviour of surface confined pentanethio cobalt (II) binuclear phthalocyanines towards the oxidation of 4-chlorophenol
- Makinde, Zainab O, Louzada, Marcel, Mashazi, Philani N, Nyokong, Tebello, Khene, Samson M
- Authors: Makinde, Zainab O , Louzada, Marcel , Mashazi, Philani N , Nyokong, Tebello , Khene, Samson M
- Date: 2017
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/188138 , vital:44726 , xlink:href="https://doi.org/10.1016/j.apsusc.2017.06.271"
- Description: Cobalt binuclear phthalocyanine (CoBiPc) bearing pentanethio substituents at the peripheral positions were synthesized. The immobilization of the synthesized cobalt phthalocyanines on gold electrode was achieved using self-assembled monolayer method (SAM). X-ray photoelectron spectroscopy (XPS) and Kelvin Probe (KP) techniques were used to characterise the formation of monomeric and binuclear phthalocyanine SAMs on the gold surface. The phthalocyanine SAMs on gold electrodes were investigated for electrocatalytic oxidation of 4-chlorophenol. The electrocatalytic properties of tetra- and octa- pentanethio substituted cobalt binuclear phthalocyanine (CoBiPc) are compared with their tetra- and octa-pentanethio substituted phthalocyanine (CoPc). The SAMs modified gold electrode surfaces showed a peak current enhancement and stability and reduction in electrocatalytic potentials compared to the bare or unmodified electrodes towards the detection of the 4-chlorophenol. The SAMs of cobalt binuclear phthalocyanines exhibited more enhanced electrocatalytic properties in terms of stability, detection peak current and reduction of the electrocatalytic over potential.
- Full Text:
- Date Issued: 2017
- Authors: Makinde, Zainab O , Louzada, Marcel , Mashazi, Philani N , Nyokong, Tebello , Khene, Samson M
- Date: 2017
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/188138 , vital:44726 , xlink:href="https://doi.org/10.1016/j.apsusc.2017.06.271"
- Description: Cobalt binuclear phthalocyanine (CoBiPc) bearing pentanethio substituents at the peripheral positions were synthesized. The immobilization of the synthesized cobalt phthalocyanines on gold electrode was achieved using self-assembled monolayer method (SAM). X-ray photoelectron spectroscopy (XPS) and Kelvin Probe (KP) techniques were used to characterise the formation of monomeric and binuclear phthalocyanine SAMs on the gold surface. The phthalocyanine SAMs on gold electrodes were investigated for electrocatalytic oxidation of 4-chlorophenol. The electrocatalytic properties of tetra- and octa- pentanethio substituted cobalt binuclear phthalocyanine (CoBiPc) are compared with their tetra- and octa-pentanethio substituted phthalocyanine (CoPc). The SAMs modified gold electrode surfaces showed a peak current enhancement and stability and reduction in electrocatalytic potentials compared to the bare or unmodified electrodes towards the detection of the 4-chlorophenol. The SAMs of cobalt binuclear phthalocyanines exhibited more enhanced electrocatalytic properties in terms of stability, detection peak current and reduction of the electrocatalytic over potential.
- Full Text:
- Date Issued: 2017
Electrochemical impedimetric immunosensor for the detection of measles-specific IgG antibodies after measles infections
- Mashazi, Philani N, Tetyana, Phumlani, Vilakazi, Sibulelo, Nyokong, Tebello
- Authors: Mashazi, Philani N , Tetyana, Phumlani , Vilakazi, Sibulelo , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241677 , vital:50960 , xlink:href="https://doi.org/10.1016/j.bios.2013.04.028"
- Description: The detection of measles-specific primary antibodies (IgG) using electrochemical impedimetric immunosensors is reported. The optimum conditions for electrode saturation were reached after 40 min for 1 μg ml−1 antibody concentrations. Surface roughness using AFM increased with each immobilization or antigen-antibody reaction step clearly confirming the surface modification and recognition between antigen and antibody. The human serum (HS) and new-born calf serum (NCS) spiked with antigen-specific antibody were studied to mimic the real sample analysis. The HS and NCS sera containing antibodies due to measles exhibited correlation between the increasing antibody serum concentrations and the charge-transfer resistance (electrochemically measured). This work clearly showed the potential use of impedance as the preferred electrochemical method for detecting measles-antibodies in label-free manner.
- Full Text:
- Date Issued: 2013
- Authors: Mashazi, Philani N , Tetyana, Phumlani , Vilakazi, Sibulelo , Nyokong, Tebello
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241677 , vital:50960 , xlink:href="https://doi.org/10.1016/j.bios.2013.04.028"
- Description: The detection of measles-specific primary antibodies (IgG) using electrochemical impedimetric immunosensors is reported. The optimum conditions for electrode saturation were reached after 40 min for 1 μg ml−1 antibody concentrations. Surface roughness using AFM increased with each immobilization or antigen-antibody reaction step clearly confirming the surface modification and recognition between antigen and antibody. The human serum (HS) and new-born calf serum (NCS) spiked with antigen-specific antibody were studied to mimic the real sample analysis. The HS and NCS sera containing antibodies due to measles exhibited correlation between the increasing antibody serum concentrations and the charge-transfer resistance (electrochemically measured). This work clearly showed the potential use of impedance as the preferred electrochemical method for detecting measles-antibodies in label-free manner.
- Full Text:
- Date Issued: 2013
Electrochemical impedimetric immunosensor for the detection of measles-specific IgG antibodies after measles infections
- Mashazi, Philani N, Tetyana, Phumlani, Vilakazi, Sibulelo, Nyokong, Tebello
- Authors: Mashazi, Philani N , Tetyana, Phumlani , Vilakazi, Sibulelo , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7325 , http://hdl.handle.net/10962/d1020575
- Description: The detection of measles-specific primary antibodies (IgG) using electrochemical impedimetric immunosensors is reported. The optimum conditions for electrode saturation were reached after 40 min for 1 μg ml−1 antibody concentrations. Surface roughness using AFM increased with each immobilization or antigen-antibody reaction step clearly confirming the surface modification and recognition between antigen and antibody. The human serum (HS) and new-born calf serum (NCS) spiked with antigen-specific antibody were studied to mimic the real sample analysis. The HS and NCS sera containing antibodies due to measles exhibited correlation between the increasing antibody serum concentrations and the charge-transfer resistance (electrochemically measured). This work clearly showed the potential use of impedance as the preferred electrochemical method for detecting measles-antibodies in label-free manner. , Original publication is available at http://dx.doi.org/10.1016/j.bios.2013.04.028
- Full Text: false
- Authors: Mashazi, Philani N , Tetyana, Phumlani , Vilakazi, Sibulelo , Nyokong, Tebello
- Language: English
- Type: Article
- Identifier: vital:7325 , http://hdl.handle.net/10962/d1020575
- Description: The detection of measles-specific primary antibodies (IgG) using electrochemical impedimetric immunosensors is reported. The optimum conditions for electrode saturation were reached after 40 min for 1 μg ml−1 antibody concentrations. Surface roughness using AFM increased with each immobilization or antigen-antibody reaction step clearly confirming the surface modification and recognition between antigen and antibody. The human serum (HS) and new-born calf serum (NCS) spiked with antigen-specific antibody were studied to mimic the real sample analysis. The HS and NCS sera containing antibodies due to measles exhibited correlation between the increasing antibody serum concentrations and the charge-transfer resistance (electrochemically measured). This work clearly showed the potential use of impedance as the preferred electrochemical method for detecting measles-antibodies in label-free manner. , Original publication is available at http://dx.doi.org/10.1016/j.bios.2013.04.028
- Full Text: false
Electrografting of isophthalic acid monolayer and covalent attachment of antibody onto carbon surfaces
- Mwanza, Daniel, Phal, Sereilakhena, Nyokong, Tebello, Tesfalidet, Solomon, Mashazi, Philani N
- Authors: Mwanza, Daniel , Phal, Sereilakhena , Nyokong, Tebello , Tesfalidet, Solomon , Mashazi, Philani N
- Date: 2021
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/231345 , vital:49879 , xlink:href="https://doi.org/10.1016/j.electacta.2021.139360"
- Description: In this study, a 5-diazonium isophthalic acid was synthesized and electrografted onto glassy carbon (GCE) and screen-printed carbon (SPCE) electrodes. SPCE was used to demonstrate fabrication of a miniature device and to compare with conventional glassy carbon electrodes. The isophthalic acid (IPA) electrografted thin film was used for the immobilization of anti-methotrexate antibody (Ab) using carbodiimide activation chemistry to form antibody modified surfaces, GCE-IPA-Ab and SPCE-IPA-Ab. The GCE -IPA-Ab and SPCE-IPA-Ab surfaces were used as capacitive biosensors for the detection of methotrexate (MTX) in phosphate buffer (pH 7.4) using capacitive electrochemical impedance spectroscopy (EIS). The EIS data was analyzed using singular value decomposition (SVD). Principal component regression analysis gave R2 values of 0.99 for both the GCE-IPA-Ab and SPCE-IPA-Ab surfaces. The detection limit from the calibration curve of the GCE-IPA-Ab and SPCE-IPA-Ab was calculated to be 7.0 pmol.L−1 and 5.5 pmol.L−1, respectively.
- Full Text:
- Date Issued: 2021
- Authors: Mwanza, Daniel , Phal, Sereilakhena , Nyokong, Tebello , Tesfalidet, Solomon , Mashazi, Philani N
- Date: 2021
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/231345 , vital:49879 , xlink:href="https://doi.org/10.1016/j.electacta.2021.139360"
- Description: In this study, a 5-diazonium isophthalic acid was synthesized and electrografted onto glassy carbon (GCE) and screen-printed carbon (SPCE) electrodes. SPCE was used to demonstrate fabrication of a miniature device and to compare with conventional glassy carbon electrodes. The isophthalic acid (IPA) electrografted thin film was used for the immobilization of anti-methotrexate antibody (Ab) using carbodiimide activation chemistry to form antibody modified surfaces, GCE-IPA-Ab and SPCE-IPA-Ab. The GCE -IPA-Ab and SPCE-IPA-Ab surfaces were used as capacitive biosensors for the detection of methotrexate (MTX) in phosphate buffer (pH 7.4) using capacitive electrochemical impedance spectroscopy (EIS). The EIS data was analyzed using singular value decomposition (SVD). Principal component regression analysis gave R2 values of 0.99 for both the GCE-IPA-Ab and SPCE-IPA-Ab surfaces. The detection limit from the calibration curve of the GCE-IPA-Ab and SPCE-IPA-Ab was calculated to be 7.0 pmol.L−1 and 5.5 pmol.L−1, respectively.
- Full Text:
- Date Issued: 2021
Exploiting Click Chemistry for the Covalent Immobilization of Tetra (4-Propargyloxyphenoxy) Metallophthalocyanines onto Phenylazide-Grafted Gold Surfaces
- Mwanza, Daniel, Mvango, Sindisiwe, Khene, Samson M, Nyokong, Tebello, Mashazi, Philani N
- Authors: Mwanza, Daniel , Mvango, Sindisiwe , Khene, Samson M , Nyokong, Tebello , Mashazi, Philani N
- Date: 2017
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189177 , vital:44824 , xlink:href="https://doi.org/10.1016/j.electacta.2017.09.115"
- Description: In this study, tetra-(4-propargyloxy)phenoxy phthalocyanines (MTPrOPhOPc) were covalently immobilized as thin films onto gold surfaces via click reaction. The gold electrode surfaces were pre-functionalized with phenylazide (Au-PAz) thin film using in-situ diazonium generation followed by electrografting. Copper (I) catalyzed alkynyl-azide cycloaddition (CuCAAC) reaction was used to covalently immobilize the MTPrOPhOPcs onto the gold electrode surfaces to form Au-PAz-MTPrOPhOPc. The MTPrOPhOPcs were further studied for their electrocatalytic and electroanalytical properties towards the detection of hydrogen peroxide. Au-PAz-MTPrOPhOPc exhibited good reproducibility and stability in various electrolyte conditions. Electrochemical and spectroscopic surface characterization of the functionalized gold electrode surfaces confirmed the presence of the phenylazide and MTPrOPhOPc thin monolayer films. The excellent electroanalysis of hydrogen peroxide with the limit of detection (LoD) and limit of quantification (LoQ) in the μM range was obtained. The electrocatalytic reduction peaks for H2O2 were observed at −0.37 V for Au-PAz-Mn(OAc)TPrOPhOPc and −0.31 V for Au-PAz-CoTPrOPhOPc when Ag|AgCl pseudo-reference electrode was used. The Au-PAz-Mn(OAc)TPrOPhOPc and Au-PAz-CoTPrOPhOPc gold electrode surfaces showed good sensitivity and reproducibility towards the electrocatalytic reduction of hydrogen peroxide in pH 7.4 phosphate buffer solution.
- Full Text:
- Date Issued: 2017
- Authors: Mwanza, Daniel , Mvango, Sindisiwe , Khene, Samson M , Nyokong, Tebello , Mashazi, Philani N
- Date: 2017
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/189177 , vital:44824 , xlink:href="https://doi.org/10.1016/j.electacta.2017.09.115"
- Description: In this study, tetra-(4-propargyloxy)phenoxy phthalocyanines (MTPrOPhOPc) were covalently immobilized as thin films onto gold surfaces via click reaction. The gold electrode surfaces were pre-functionalized with phenylazide (Au-PAz) thin film using in-situ diazonium generation followed by electrografting. Copper (I) catalyzed alkynyl-azide cycloaddition (CuCAAC) reaction was used to covalently immobilize the MTPrOPhOPcs onto the gold electrode surfaces to form Au-PAz-MTPrOPhOPc. The MTPrOPhOPcs were further studied for their electrocatalytic and electroanalytical properties towards the detection of hydrogen peroxide. Au-PAz-MTPrOPhOPc exhibited good reproducibility and stability in various electrolyte conditions. Electrochemical and spectroscopic surface characterization of the functionalized gold electrode surfaces confirmed the presence of the phenylazide and MTPrOPhOPc thin monolayer films. The excellent electroanalysis of hydrogen peroxide with the limit of detection (LoD) and limit of quantification (LoQ) in the μM range was obtained. The electrocatalytic reduction peaks for H2O2 were observed at −0.37 V for Au-PAz-Mn(OAc)TPrOPhOPc and −0.31 V for Au-PAz-CoTPrOPhOPc when Ag|AgCl pseudo-reference electrode was used. The Au-PAz-Mn(OAc)TPrOPhOPc and Au-PAz-CoTPrOPhOPc gold electrode surfaces showed good sensitivity and reproducibility towards the electrocatalytic reduction of hydrogen peroxide in pH 7.4 phosphate buffer solution.
- Full Text:
- Date Issued: 2017
Facile deposition of gold nanoparticle thin films on semi-permeable cellulose substrate
- Sosibo, Ndabenhle, Mdluli, Phumlani, Mashazi, Philani N, Tshikhudo, Robert, Skepu, Amanda, Vilakazi, Sibulelo, Nyokong, Tebello
- Authors: Sosibo, Ndabenhle , Mdluli, Phumlani , Mashazi, Philani N , Tshikhudo, Robert , Skepu, Amanda , Vilakazi, Sibulelo , Nyokong, Tebello
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/242638 , vital:51063 , xlink:href="https://doi.org/10.1016/j.matlet.2012.08.043"
- Description: This study reports the facile method for the deposition of gold nanoparticle thin film onto a monoporous semi-permeable cellulose membrane through the diffusion of borohydride ions leading to the reduction of AuCl4− ions. The synthesis of gold nanoparticle thin film was deposited on one side of the membrane that was exposed to AuCl4− ions while the other side containing a reducing agent remained clear. The gold nanoparticle thin film exhibited a broad surface plasmon resonance (SPR) peak at 529 nm. Various characterization techniques were employed and all demonstrated the presence of gold thin film. The reported method represents a simplistic method for the deposition of gold nanoparticle thin films and various other metal nanoparticles may be deposited following this method.
- Full Text:
- Date Issued: 2012
- Authors: Sosibo, Ndabenhle , Mdluli, Phumlani , Mashazi, Philani N , Tshikhudo, Robert , Skepu, Amanda , Vilakazi, Sibulelo , Nyokong, Tebello
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/242638 , vital:51063 , xlink:href="https://doi.org/10.1016/j.matlet.2012.08.043"
- Description: This study reports the facile method for the deposition of gold nanoparticle thin film onto a monoporous semi-permeable cellulose membrane through the diffusion of borohydride ions leading to the reduction of AuCl4− ions. The synthesis of gold nanoparticle thin film was deposited on one side of the membrane that was exposed to AuCl4− ions while the other side containing a reducing agent remained clear. The gold nanoparticle thin film exhibited a broad surface plasmon resonance (SPR) peak at 529 nm. Various characterization techniques were employed and all demonstrated the presence of gold thin film. The reported method represents a simplistic method for the deposition of gold nanoparticle thin films and various other metal nanoparticles may be deposited following this method.
- Full Text:
- Date Issued: 2012
Fluorescence properties of alloyed ZnSeS quantum dots overcoated with ZnTe and ZnTe/ZnS shells
- Adegoke, Oluwasesan, Mashazi, Philani N, Nyokong, Tebello, Forbes, Patricia B C
- Authors: Adegoke, Oluwasesan , Mashazi, Philani N , Nyokong, Tebello , Forbes, Patricia B C
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/240754 , vital:50868 , xlink:href="https://doi.org/10.1016/j.optmat.2016.02.024"
- Description: Fluorescent alloyed ternary ZnSeS quantum dots (QDs) have been synthesized via the pyrolysis of organometallic precursors. The effects of passivation of ZnTe and ZnTe/ZnS shells on the optical properties of the ternary alloyed ZnSeS core have been studied. A ligand exchange reaction using L-cysteine as a capping ligand was used to obtain water-soluble nanocrystals. The nanocrystals were each characterized by UV/vis absorption and fluorescence spectroscopy, transmission electron microscopy, X-ray diffractometry (XRD) and X-ray photoelectron spectroscopy (XPS). The photoluminescence (PL) quantum yield (QY) of alloyed ZnSeS QDs was 14% and this value increased to 27% when ZnTe was overcoated around the surface but further coating with a ZnS shell decreased the PL QY slightly to 24%. This implies that ZnTe shell suppressed non-radiative recombination exciton states in the alloyed core while further layering with a ZnS shell offered no further improvement in suppressing the defect states. XPS analysis confirmed the presence of the first shell layering but showed a weakened intensity signal of S (2p) and Se (3d) for the ZnSeS/ZnTe/ZnS QDs. Our work demonstrates for the first time that shell passivation of alloyed Zn-based QDs can offer improved optical properties. We hope the optical information presented in this work will be useful in the selection of alloyed Zn-based QDs appropriate for the intended application.
- Full Text:
- Date Issued: 2016
- Authors: Adegoke, Oluwasesan , Mashazi, Philani N , Nyokong, Tebello , Forbes, Patricia B C
- Date: 2016
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/240754 , vital:50868 , xlink:href="https://doi.org/10.1016/j.optmat.2016.02.024"
- Description: Fluorescent alloyed ternary ZnSeS quantum dots (QDs) have been synthesized via the pyrolysis of organometallic precursors. The effects of passivation of ZnTe and ZnTe/ZnS shells on the optical properties of the ternary alloyed ZnSeS core have been studied. A ligand exchange reaction using L-cysteine as a capping ligand was used to obtain water-soluble nanocrystals. The nanocrystals were each characterized by UV/vis absorption and fluorescence spectroscopy, transmission electron microscopy, X-ray diffractometry (XRD) and X-ray photoelectron spectroscopy (XPS). The photoluminescence (PL) quantum yield (QY) of alloyed ZnSeS QDs was 14% and this value increased to 27% when ZnTe was overcoated around the surface but further coating with a ZnS shell decreased the PL QY slightly to 24%. This implies that ZnTe shell suppressed non-radiative recombination exciton states in the alloyed core while further layering with a ZnS shell offered no further improvement in suppressing the defect states. XPS analysis confirmed the presence of the first shell layering but showed a weakened intensity signal of S (2p) and Se (3d) for the ZnSeS/ZnTe/ZnS QDs. Our work demonstrates for the first time that shell passivation of alloyed Zn-based QDs can offer improved optical properties. We hope the optical information presented in this work will be useful in the selection of alloyed Zn-based QDs appropriate for the intended application.
- Full Text:
- Date Issued: 2016
Morphological influence of deposition routes on lead sulfide thin films
- Mlowe, Sixberth, Shombe, Ginena B, Akerman, Matthew P, Mubofu, Egid B, O'Brien, Paul, Mashazi, Philani N, Nyokong, Tebello, Revaprasadu, Neerish
- Authors: Mlowe, Sixberth , Shombe, Ginena B , Akerman, Matthew P , Mubofu, Egid B , O'Brien, Paul , Mashazi, Philani N , Nyokong, Tebello , Revaprasadu, Neerish
- Date: 2019
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/186780 , vital:44533 , xlink:href="https://doi.org/10.1016/j.ica.2019.119116"
- Description: A distorted single crystal structure of bis(piperidinedithiocarbamato)lead(II) complex and its subsequent use to deposit thin films is reported. Two deposition routes namely, aerosol-assisted chemical vapour deposition (AACVD) and spin coating deposition have been employed to obtain anisotropic lead sulfide (PbS) nanostructures. The thin films displayed rod to cubic shaped crystals for AACVD, and a range of cubes, star and dendritic morphologies with variation of temperatures were displayed for spin coated films. Optical band gaps between 1.32 and 1.55 eV as controlled by the change in temperature were observed for thin films deposited by AACVD. Powder X-ray diffraction (P-XRD) studies show that the films formed are composed of cubic crystalline PbS. The X-ray photoelectron spectroscopy (XPS) was used to investigate the effect of activation temperatures (350, 400 and 450 °C) on the chemical composition and oxidation states of PbS samples.
- Full Text:
- Date Issued: 2019
- Authors: Mlowe, Sixberth , Shombe, Ginena B , Akerman, Matthew P , Mubofu, Egid B , O'Brien, Paul , Mashazi, Philani N , Nyokong, Tebello , Revaprasadu, Neerish
- Date: 2019
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/186780 , vital:44533 , xlink:href="https://doi.org/10.1016/j.ica.2019.119116"
- Description: A distorted single crystal structure of bis(piperidinedithiocarbamato)lead(II) complex and its subsequent use to deposit thin films is reported. Two deposition routes namely, aerosol-assisted chemical vapour deposition (AACVD) and spin coating deposition have been employed to obtain anisotropic lead sulfide (PbS) nanostructures. The thin films displayed rod to cubic shaped crystals for AACVD, and a range of cubes, star and dendritic morphologies with variation of temperatures were displayed for spin coated films. Optical band gaps between 1.32 and 1.55 eV as controlled by the change in temperature were observed for thin films deposited by AACVD. Powder X-ray diffraction (P-XRD) studies show that the films formed are composed of cubic crystalline PbS. The X-ray photoelectron spectroscopy (XPS) was used to investigate the effect of activation temperatures (350, 400 and 450 °C) on the chemical composition and oxidation states of PbS samples.
- Full Text:
- Date Issued: 2019
Nanohybrid electrocatalyst based on cobalt phthalocyanine-carbon nanotube-reduced graphene oxide for ultrasensitive detection of glucose in human saliva
- Adeniyi, Omotayo, Nwahara, Nnamdi, Mwanza, Daniel, Nyokong, Tebello, Mashazi, Philani N
- Authors: Adeniyi, Omotayo , Nwahara, Nnamdi , Mwanza, Daniel , Nyokong, Tebello , Mashazi, Philani N
- Date: 2021
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/231356 , vital:49880 , xlink:href="https://doi.org/10.1016/j.snb.2021.130723"
- Description: The current diabetes management systems require collecting blood samples via an invasive and painful finger pricking leading to the formation of callus, scarring and loss of sensibility to patients due to continuous monitoring. Therefore, a non-invasive and painless method of determining glucose levels would be desirable to diabetes patients who need constant monitoring. Saliva glucose measurement is a non-invasive alternative for diabetes management. A highly sensitive, stable, and selective non-enzymatic electrochemical sensor that can accurately quantify saliva glucose is required. A single-walled carbon nanotube/reduced graphene oxide/cobalt phthalocyanines nanohybrid modified glassy carbon electrode (GCE-SWCNT/rGO/CoPc) has been fabricated for the non-enzymatic determination of glucose in human saliva. The SWCNT/rGO/CoPc was characterized using various spectroscopic, microscopic, and electrochemical techniques. The synergistic effect between SWCNT, rGO, and CoPc facilitated excellent electron transfer process that improved the sensor sensitivity. The GCE-SWCNT/rGO/CoPc sensor exhibited two linear responses in the 0.30 μM to 0.50 mM and 0.50–5.0 mM glucose concentration ranges, and the detection limit was 0.12 μM. The sensor had an excellent saliva glucose detection sensitivity of 992.4 μA·mM−1·cm−2 and high specificity for glucose in the presence of other coexisting analytes. In addition, it showed good storage stability, reusability, and a fast response time of about 1.2 s. The GCE-SWCNT/rGO/CoPc nanohybrid electrode showed excellent potential for developing accurate, non-invasive, and painless glucose sensing.
- Full Text:
- Date Issued: 2021
- Authors: Adeniyi, Omotayo , Nwahara, Nnamdi , Mwanza, Daniel , Nyokong, Tebello , Mashazi, Philani N
- Date: 2021
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/231356 , vital:49880 , xlink:href="https://doi.org/10.1016/j.snb.2021.130723"
- Description: The current diabetes management systems require collecting blood samples via an invasive and painful finger pricking leading to the formation of callus, scarring and loss of sensibility to patients due to continuous monitoring. Therefore, a non-invasive and painless method of determining glucose levels would be desirable to diabetes patients who need constant monitoring. Saliva glucose measurement is a non-invasive alternative for diabetes management. A highly sensitive, stable, and selective non-enzymatic electrochemical sensor that can accurately quantify saliva glucose is required. A single-walled carbon nanotube/reduced graphene oxide/cobalt phthalocyanines nanohybrid modified glassy carbon electrode (GCE-SWCNT/rGO/CoPc) has been fabricated for the non-enzymatic determination of glucose in human saliva. The SWCNT/rGO/CoPc was characterized using various spectroscopic, microscopic, and electrochemical techniques. The synergistic effect between SWCNT, rGO, and CoPc facilitated excellent electron transfer process that improved the sensor sensitivity. The GCE-SWCNT/rGO/CoPc sensor exhibited two linear responses in the 0.30 μM to 0.50 mM and 0.50–5.0 mM glucose concentration ranges, and the detection limit was 0.12 μM. The sensor had an excellent saliva glucose detection sensitivity of 992.4 μA·mM−1·cm−2 and high specificity for glucose in the presence of other coexisting analytes. In addition, it showed good storage stability, reusability, and a fast response time of about 1.2 s. The GCE-SWCNT/rGO/CoPc nanohybrid electrode showed excellent potential for developing accurate, non-invasive, and painless glucose sensing.
- Full Text:
- Date Issued: 2021
Optimizing phthalocyanine based dye-sensitized solar cells: The role of reduced graphene oxide
- Chindeka, Francis, Mashazi, Philani N, Britton, Jonathan, Fomo, Gertrude, Oluwole, David O, Sindelo, Azole, Nyokong, Tebello
- Authors: Chindeka, Francis , Mashazi, Philani N , Britton, Jonathan , Fomo, Gertrude , Oluwole, David O , Sindelo, Azole , Nyokong, Tebello
- Date: 2018
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/187770 , vital:44695 , xlink:href="https://doi.org/10.1016/j.synthmet.2018.10.021"
- Description: Dye-sensitized solar cells (DSSC) were fabricated by incorporating graphene materials as catalysts at the counter electrode. Platinum was also used as a catalyst for comparison purposes. Different phthalocyanines: hydroxyl indium tetracarboxyphenoxy phthalocyanine (1), chloro indium octacarboxy phthalocyanine (2) and dibenzoic acid silicon phthalocyanine (3) were used as dyes. Complex 3 gave the highest power conversion efficiency (η) of 3.19% when using nitrogen doped reduced graphene oxide nanosheets (NrGONS) as a catalyst at the counter electrode, and TiO2 containing rGONS at the anode. The value is close to 3.8% obtained when using Pt catalyst instead of NrGONS at the cathode, thus confirming that NrGONS is a promising candidate to replace the more expensive Pt. The study also shows that placing rGONS on both the anode and cathode improves efficiency.
- Full Text:
- Date Issued: 2018
- Authors: Chindeka, Francis , Mashazi, Philani N , Britton, Jonathan , Fomo, Gertrude , Oluwole, David O , Sindelo, Azole , Nyokong, Tebello
- Date: 2018
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/187770 , vital:44695 , xlink:href="https://doi.org/10.1016/j.synthmet.2018.10.021"
- Description: Dye-sensitized solar cells (DSSC) were fabricated by incorporating graphene materials as catalysts at the counter electrode. Platinum was also used as a catalyst for comparison purposes. Different phthalocyanines: hydroxyl indium tetracarboxyphenoxy phthalocyanine (1), chloro indium octacarboxy phthalocyanine (2) and dibenzoic acid silicon phthalocyanine (3) were used as dyes. Complex 3 gave the highest power conversion efficiency (η) of 3.19% when using nitrogen doped reduced graphene oxide nanosheets (NrGONS) as a catalyst at the counter electrode, and TiO2 containing rGONS at the anode. The value is close to 3.8% obtained when using Pt catalyst instead of NrGONS at the cathode, thus confirming that NrGONS is a promising candidate to replace the more expensive Pt. The study also shows that placing rGONS on both the anode and cathode improves efficiency.
- Full Text:
- Date Issued: 2018
Photophysical properties of zinc phthalocyanine–uridine single walled carbon nanotube – conjugates
- Ogbodu, Racheal O, Amuhaya, Edith, Mashazi, Philani N, Nyokong, Tebello
- Authors: Ogbodu, Racheal O , Amuhaya, Edith , Mashazi, Philani N , Nyokong, Tebello
- Date: 2015
- Language: English
- Type: Article
- Identifier: vital:7274 , http://hdl.handle.net/10962/d1020289 , http://dx.doi.org/10.1016/j.saa.2015.04.040
- Description: Original publication is available at http://dx.doi.org/10.1016/j.saa.2015.04.040
- Full Text: false
- Date Issued: 2015
- Authors: Ogbodu, Racheal O , Amuhaya, Edith , Mashazi, Philani N , Nyokong, Tebello
- Date: 2015
- Language: English
- Type: Article
- Identifier: vital:7274 , http://hdl.handle.net/10962/d1020289 , http://dx.doi.org/10.1016/j.saa.2015.04.040
- Description: Original publication is available at http://dx.doi.org/10.1016/j.saa.2015.04.040
- Full Text: false
- Date Issued: 2015